This document provides instructions for disassembling and assembling the travel motor of 325C excavator models. The disassembly procedure involves 27 steps to remove components like the head, brake piston, barrel assembly, springs and seals. The assembly procedure consists of 26 steps and requires applying sealant and hydraulic oil, and ensuring components like keys and locating pins are correctly installed. Special care must be taken to avoid damage and keep identification marks aligned during the process.
Kobelco sk250 10 hydraulic excavator service repair manualfjsjjekdkme
This document outlines general precautions and guidelines for repairing excavator equipment according to the shop manual. It discusses preparing for disassembly, safety during disassembly and assembly, handling hydraulic and electrical equipment, welding repairs, and environmental issues. The outline notes that the copyright belongs to Kobelco and outlines rules for copying or distributing the manual's contents. It also introduces the international unit system used in specifications.
Caterpillar cat 325 c l excavator (prefix csj) service repair manual (csj0000...fjsjjekdkme
This document provides instructions for disassembling and assembling the travel motor of a 325C excavator. The disassembly procedure involves 27 steps to remove components like the head, check valves, fittings, seals, brake piston, friction plates, barrel assembly, and shaft assembly. The assembly procedure describes 21 steps and includes applying seals and lubricants to reinstall the components in reverse order of disassembly. Special care must be taken with alignment marks and component positions during reassembly.
This document provides an outline and general precautions for a shop manual. It discusses the copyright of the manual, preparation for disassembling equipment, safety procedures, hydraulic and electrical equipment handling, welding repairs, and international unit systems. The outline covers topics to be included in the manual such as specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation procedures.
Kobelco sk60 8 hydraulic excavator service repair manualfjsjjekdkme
This document appears to be a shop manual that contains information for maintenance and repair of hydraulic excavators. It includes sections on specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation procedures. The document provides safety precautions for repairs and disassembly/assembly. It also includes a table for international unit conversion. The manual is intended as a technical reference for maintenance technicians to perform repairs and find fault equipment.
Kawasaki 80 z7b wheel loader service repair manual (serial no. 80c8 5001 and up)fjsjjekdkme
The document contains sections from a shop manual for a wheel loader. It includes sections on general information, component layout, specifications, and maintenance procedures. The component layout sections describe and illustrate the main components of the wheel loader including the engine, hydraulic system, electrical system, cab, drive unit, and other key components. The specifications section lists technical specifications for the engine, operating weights, dimensions, travel speeds and other performance specifications.
Kawasaki 80 z7 wheel loader service repair manual (serial no. 80c6 5001 and up)fjsjjekdkme
This document provides guidelines and precautions for disassembling and assembling components of a wheel loader. It discusses preparing the work area, marking parts for reassembly, cleaning and inspecting components, applying lubricants, and properly tightening bolts and nuts. Proper maintenance following these guidelines helps prevent damage and ensures safe and efficient reassembly.
Caterpillar cat 325 b l excavator (prefix 1hs) service repair manual (1hs0000...fjsjjekdkme
This document provides instructions for disassembling and assembling the travel motor of a 325B L excavator. It describes 27 steps to disassemble the travel motor by removing components like the head, brake piston, barrel assembly, cam plate and shaft assembly. It then describes 26 steps for reassembling the travel motor, providing details on cleaning, lubricating and properly installing each part in the reverse order of disassembly. Safety notices are included to handle fluids properly and avoid damaging components.
Caterpillar cat 325 c mobile hyd power unit (prefix msg) service repair manua...fjsjjekdkme
The document provides instructions for removing and installing a crankshaft gear on a 3126B engine. It lists the required tools and begins by instructing the user to first remove the crankshaft by following the procedure in another document. The removal procedure then instructs the user to use a bearing puller and hydraulic pump to pull the gear off the crankshaft. The installation procedure is not shown, but presumably provides instructions for pressing the gear back onto the crankshaft.
Kobelco sk250 10 hydraulic excavator service repair manualfjsjjekdkme
This document outlines general precautions and guidelines for repairing excavator equipment according to the shop manual. It discusses preparing for disassembly, safety during disassembly and assembly, handling hydraulic and electrical equipment, welding repairs, and environmental issues. The outline notes that the copyright belongs to Kobelco and outlines rules for copying or distributing the manual's contents. It also introduces the international unit system used in specifications.
Caterpillar cat 325 c l excavator (prefix csj) service repair manual (csj0000...fjsjjekdkme
This document provides instructions for disassembling and assembling the travel motor of a 325C excavator. The disassembly procedure involves 27 steps to remove components like the head, check valves, fittings, seals, brake piston, friction plates, barrel assembly, and shaft assembly. The assembly procedure describes 21 steps and includes applying seals and lubricants to reinstall the components in reverse order of disassembly. Special care must be taken with alignment marks and component positions during reassembly.
This document provides an outline and general precautions for a shop manual. It discusses the copyright of the manual, preparation for disassembling equipment, safety procedures, hydraulic and electrical equipment handling, welding repairs, and international unit systems. The outline covers topics to be included in the manual such as specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation procedures.
Kobelco sk60 8 hydraulic excavator service repair manualfjsjjekdkme
This document appears to be a shop manual that contains information for maintenance and repair of hydraulic excavators. It includes sections on specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation procedures. The document provides safety precautions for repairs and disassembly/assembly. It also includes a table for international unit conversion. The manual is intended as a technical reference for maintenance technicians to perform repairs and find fault equipment.
Kawasaki 80 z7b wheel loader service repair manual (serial no. 80c8 5001 and up)fjsjjekdkme
The document contains sections from a shop manual for a wheel loader. It includes sections on general information, component layout, specifications, and maintenance procedures. The component layout sections describe and illustrate the main components of the wheel loader including the engine, hydraulic system, electrical system, cab, drive unit, and other key components. The specifications section lists technical specifications for the engine, operating weights, dimensions, travel speeds and other performance specifications.
Kawasaki 80 z7 wheel loader service repair manual (serial no. 80c6 5001 and up)fjsjjekdkme
This document provides guidelines and precautions for disassembling and assembling components of a wheel loader. It discusses preparing the work area, marking parts for reassembly, cleaning and inspecting components, applying lubricants, and properly tightening bolts and nuts. Proper maintenance following these guidelines helps prevent damage and ensures safe and efficient reassembly.
Caterpillar cat 325 b l excavator (prefix 1hs) service repair manual (1hs0000...fjsjjekdkme
This document provides instructions for disassembling and assembling the travel motor of a 325B L excavator. It describes 27 steps to disassemble the travel motor by removing components like the head, brake piston, barrel assembly, cam plate and shaft assembly. It then describes 26 steps for reassembling the travel motor, providing details on cleaning, lubricating and properly installing each part in the reverse order of disassembly. Safety notices are included to handle fluids properly and avoid damaging components.
Caterpillar cat 325 c mobile hyd power unit (prefix msg) service repair manua...fjsjjekdkme
The document provides instructions for removing and installing a crankshaft gear on a 3126B engine. It lists the required tools and begins by instructing the user to first remove the crankshaft by following the procedure in another document. The removal procedure then instructs the user to use a bearing puller and hydraulic pump to pull the gear off the crankshaft. The installation procedure is not shown, but presumably provides instructions for pressing the gear back onto the crankshaft.
Caterpillar cat 312 c excavator (prefix fds) service repair manual (fds00001 ...fjsjjekdkme
This document provides disassembly instructions for the 312C and 312C L excavator final drive, travel motor, and travel counterbalance valve systems. It outlines 17 steps to disassemble the final drive which includes removing covers, plates, gears, and bearings. It also details 13 steps to disassemble the travel motor such as removing piston assemblies, seals, and barrel components. Finally, it lists 15 steps for disassembling the travel counterbalance valve including removing springs, spools, valves, and housings. Personal safety notices are included throughout regarding releasing pressures and contained parts.
Kobelco sk300 lc 10 hydraulic excavator service repair manualfjsjjekdkme
This document is a shop manual that provides specifications, maintenance, system, disassembly, troubleshooting, and engine information for a hydraulic excavator model. It contains sections on specifications, maintenance, systems, disassembly, troubleshooting, engine, and installation of options. Safety information is provided throughout, including general safety, safety precautions, and warnings.
Kobelco sk270 srlc 5 (na 2018 yu08) hydraulic excavator service repair manualfjsjjekdkme
This document is the shop manual for a hydraulic excavator. It contains outlines, precautions, and general information for repairing and maintaining the excavator. The manual is divided into chapters covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachments. Precautions are provided for safety, preparing for disassembly, hydraulic and electrical equipment, and welding repairs. Copyright information is also included.
Caterpillar cat 325 b l track type excavator (prefix 8pr) service repair manu...fjsjjekdkme
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembling the travel motor which include removing components like the head, brake piston, barrel assembly, cam plate and shaft assembly. It then lists 26 steps for assembling the travel motor which involve installing components like the shaft assembly, cam plate, barrel assembly, brake piston and head in the reverse order of disassembly. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar cat 325 c excavator (prefix crb) service repair manual (crb00001 ...fjsjjekdkme
The document provides instructions for removing and installing the camshaft on a Caterpillar 3126B engine used in 325C excavators. The summary is:
1) Remove the lifter group and front cover to access the camshaft. Wire the valve lifters away from the camshaft. Remove the camshaft retainer plate and bolts, then remove the camshaft.
2) Install the camshaft, ensuring the timing marks are aligned. Install the camshaft retainer plate and bolts. Install the lifter group and front cover.
3) The document provides step-by-step instructions for removing and installing the camshaft, camshaft gear
Kawasaki 80 z7 wheel loader service repair manual (serial no. 80c6 3001 and up)fjsjjekdkme
The document provides layout diagrams and specifications for the components of a Hitachi 80Z7 wheel loader, including the location of the engine, hydraulic pumps, electrical components, radiator assembly, cab, front and rear axles, and other major systems. Specification data is given for the loader's dimensions, bucket capacity, operating weight, tipping load, and engine details. The diagrams show the positioning of the main mechanical and electrical components.
Kawasaki 90 z6 wheel loader service repair manual (serial no. 90c7 0101 and up)fjsjjekdkme
This document provides specifications and component layout information for a 90Z6 wheel loader.
The specifications section lists operating weights, engine details, dimensions, speeds and other technical specifications for the GSC and LSC models.
The component layout sections include diagrams and lists showing the layout and weights of major components such as the chassis, powertrain, hydraulic, electrical and other systems. Component names, locations and approximate weights are provided.
This shop manual provides information needed for the disassembly, reassembly, and repair of a Kawasaki 135ZV-2 wheel loader. It includes specifications, tightening torques, and service standards for the chassis, power, hydraulic, brake, and operator station systems. Safety precautions and symbols are defined. The manual instructs technicians on removing and installing major components like the engine, transmission, axles, cylinders, and more. Cautions are provided regarding parts handling and use of sealants or lock agents.
Caterpillar cat 325 b excavator (prefix 6dn) service repair manual (6dn00001 ...fjsjjekdkme
This service repair manual provides instructions for removing and installing inlet manifolds, valves, and valve guides on Caterpillar 325B and 325B LN excavator engines. The document outlines the required tools and safety procedures, and provides step-by-step instructions with illustrations for each repair procedure. Technicians are advised to keep parts clean, contain fluids properly, and refer to other documents for guidance on reusable components.
Kobelco sk380 xdlc 10 hydraulic excavator service repair manualfjsjjekdkme
This document is a shop manual that provides guidelines and safety precautions for maintenance and repairs of hydraulic excavators. It contains sections on specifications, maintenance procedures, systems overview, disassembly/assembly instructions, troubleshooting, engines, and optional attachment installation. The manual is intended to instruct repair and service technicians on proper procedures. Copyright of the manual belongs to Kobelco Construction Machinery and permission is required for copying or distributing its contents.
Caterpillar cat 325 b excavator (prefix 8fn) service repair manual (8fn00001 ...fjsjjekdkme
This document provides instructions for removing and installing a cylinder head on an excavator. It begins by listing other components that must first be removed, such as the fuel filter base, governor, fuel linkage, and manifolds. The removal procedure then instructs technicians to attach a lifting device to the cylinder head and remove bolts holding it to the cylinder block before removing the gasket. The installation procedure lists cleaning the mating surfaces and applying lubricant to the gasket before positioning the head and torquing the bolts to specifications.
This is the Highly Detailed factory service repair manual for the KAWASAKI 135ZV-2 WHEEL LOADER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KAWASAKI 135ZV-2 WHEEL LOADER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Measurement for Performance Check
Function and Structure Chassis
CHECK AND ADJUSTMENT CHASSIS
FUNCTION AND STRUCTURE POWER
CHECK AND ADJUSTMENT POWER
FUNCTION AND STRUCTURE TCAND TM
CHECK AND ADJUSTMENT TC AND TM
FUNCTION AND STRUCTION HYDRAULIC
CHECK AND ADJUSTMENT HYDRAULIC
FUNCTION AND STRUCTURE BRAKE
CHECK AND ADJUSTMENT BRAKE
FUNCTION AND STRUCTURE ELECTRICAL
ELECTRICAL HYDRAULIC DIAGRAM
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have KAWASAKI 135ZV-2 WHEEL LOADER Service Repair Workshop Manual.
Thanks for visiting!
Caterpillar cat 323 d sa excavator (prefix nes) service repair manual (nes000...jfdskekdmme
The document provides instructions for removing and installing the flywheel, flywheel housing, and crankshaft rear seal of a C6.4 engine. The flywheel is removed using lifting tools and bolts, while the flywheel housing requires removal of mounting bolts and contains a oil seal. Installation follows the reverse process, ensuring clean surfaces and applying retaining compound to mating parts. Special tools are specified for removing and installing the crankshaft rear seal and wear sleeve.
Caterpillar cat 325 b track type excavator (prefix 8pr) service repair manual...f98soeodidkdk
This document provides instructions for disassembling and assembling a travel motor. It includes 27 steps for disassembling components such as the head, brake piston, barrel assembly, and shaft assembly. It also includes 11 steps for assembling components like the lip seal, shaft assembly, cam plate, and springs back into the travel motor body. Special tools and precautions are noted to properly disassemble and reassemble the travel motor.
Caterpillar cat 325 b l track type excavator (prefix 8pr) service repair manu...f98soeodidkdk
This document provides instructions for disassembling and assembling a travel motor. It includes 27 steps for disassembling components such as the head, brake piston, barrel assembly, and shaft assembly. It also includes 11 steps for assembling components like the lip seal, shaft assembly, cam plate, and springs back into the travel motor body. Special tools and precautions are noted to properly disassemble and reassemble the travel motor.
Caterpillar cat 325 b track type excavator (prefix 8pr) service repair manual...fjsjjekdkme
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembling the travel motor which include removing components like the head, brake piston, barrel assembly, cam plate and shaft assembly. It then lists 26 steps for assembling the travel motor, assembling the components in reverse order and ensuring proper installation of seals, plates and alignment of parts. Safety notices are provided to properly contain fluids and avoid damage to components.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...orrf0370383
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing bolts, seals, plates, and other components. It then lists 26 steps for assembly, which involves cleaning components, applying seals and lubricants, and reinstalling components in reverse order of disassembly. Special care must be taken to align parts properly and not damage surfaces.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual Instant D...kubei069369925
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...jdksmmdmdd
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves 27 steps to remove components from the travel motor in the correct order. This includes removing the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly process reverses the disassembly with 27 steps and provides notices to ensure proper installation of seals, keys, and other components.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual Instant D...shanruliu7360
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual Instant D...rishang96299
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...fuusejkddmmd3e
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar cat 312 c excavator (prefix fds) service repair manual (fds00001 ...fjsjjekdkme
This document provides disassembly instructions for the 312C and 312C L excavator final drive, travel motor, and travel counterbalance valve systems. It outlines 17 steps to disassemble the final drive which includes removing covers, plates, gears, and bearings. It also details 13 steps to disassemble the travel motor such as removing piston assemblies, seals, and barrel components. Finally, it lists 15 steps for disassembling the travel counterbalance valve including removing springs, spools, valves, and housings. Personal safety notices are included throughout regarding releasing pressures and contained parts.
Kobelco sk300 lc 10 hydraulic excavator service repair manualfjsjjekdkme
This document is a shop manual that provides specifications, maintenance, system, disassembly, troubleshooting, and engine information for a hydraulic excavator model. It contains sections on specifications, maintenance, systems, disassembly, troubleshooting, engine, and installation of options. Safety information is provided throughout, including general safety, safety precautions, and warnings.
Kobelco sk270 srlc 5 (na 2018 yu08) hydraulic excavator service repair manualfjsjjekdkme
This document is the shop manual for a hydraulic excavator. It contains outlines, precautions, and general information for repairing and maintaining the excavator. The manual is divided into chapters covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachments. Precautions are provided for safety, preparing for disassembly, hydraulic and electrical equipment, and welding repairs. Copyright information is also included.
Caterpillar cat 325 b l track type excavator (prefix 8pr) service repair manu...fjsjjekdkme
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembling the travel motor which include removing components like the head, brake piston, barrel assembly, cam plate and shaft assembly. It then lists 26 steps for assembling the travel motor which involve installing components like the shaft assembly, cam plate, barrel assembly, brake piston and head in the reverse order of disassembly. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar cat 325 c excavator (prefix crb) service repair manual (crb00001 ...fjsjjekdkme
The document provides instructions for removing and installing the camshaft on a Caterpillar 3126B engine used in 325C excavators. The summary is:
1) Remove the lifter group and front cover to access the camshaft. Wire the valve lifters away from the camshaft. Remove the camshaft retainer plate and bolts, then remove the camshaft.
2) Install the camshaft, ensuring the timing marks are aligned. Install the camshaft retainer plate and bolts. Install the lifter group and front cover.
3) The document provides step-by-step instructions for removing and installing the camshaft, camshaft gear
Kawasaki 80 z7 wheel loader service repair manual (serial no. 80c6 3001 and up)fjsjjekdkme
The document provides layout diagrams and specifications for the components of a Hitachi 80Z7 wheel loader, including the location of the engine, hydraulic pumps, electrical components, radiator assembly, cab, front and rear axles, and other major systems. Specification data is given for the loader's dimensions, bucket capacity, operating weight, tipping load, and engine details. The diagrams show the positioning of the main mechanical and electrical components.
Kawasaki 90 z6 wheel loader service repair manual (serial no. 90c7 0101 and up)fjsjjekdkme
This document provides specifications and component layout information for a 90Z6 wheel loader.
The specifications section lists operating weights, engine details, dimensions, speeds and other technical specifications for the GSC and LSC models.
The component layout sections include diagrams and lists showing the layout and weights of major components such as the chassis, powertrain, hydraulic, electrical and other systems. Component names, locations and approximate weights are provided.
This shop manual provides information needed for the disassembly, reassembly, and repair of a Kawasaki 135ZV-2 wheel loader. It includes specifications, tightening torques, and service standards for the chassis, power, hydraulic, brake, and operator station systems. Safety precautions and symbols are defined. The manual instructs technicians on removing and installing major components like the engine, transmission, axles, cylinders, and more. Cautions are provided regarding parts handling and use of sealants or lock agents.
Caterpillar cat 325 b excavator (prefix 6dn) service repair manual (6dn00001 ...fjsjjekdkme
This service repair manual provides instructions for removing and installing inlet manifolds, valves, and valve guides on Caterpillar 325B and 325B LN excavator engines. The document outlines the required tools and safety procedures, and provides step-by-step instructions with illustrations for each repair procedure. Technicians are advised to keep parts clean, contain fluids properly, and refer to other documents for guidance on reusable components.
Kobelco sk380 xdlc 10 hydraulic excavator service repair manualfjsjjekdkme
This document is a shop manual that provides guidelines and safety precautions for maintenance and repairs of hydraulic excavators. It contains sections on specifications, maintenance procedures, systems overview, disassembly/assembly instructions, troubleshooting, engines, and optional attachment installation. The manual is intended to instruct repair and service technicians on proper procedures. Copyright of the manual belongs to Kobelco Construction Machinery and permission is required for copying or distributing its contents.
Caterpillar cat 325 b excavator (prefix 8fn) service repair manual (8fn00001 ...fjsjjekdkme
This document provides instructions for removing and installing a cylinder head on an excavator. It begins by listing other components that must first be removed, such as the fuel filter base, governor, fuel linkage, and manifolds. The removal procedure then instructs technicians to attach a lifting device to the cylinder head and remove bolts holding it to the cylinder block before removing the gasket. The installation procedure lists cleaning the mating surfaces and applying lubricant to the gasket before positioning the head and torquing the bolts to specifications.
This is the Highly Detailed factory service repair manual for the KAWASAKI 135ZV-2 WHEEL LOADER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KAWASAKI 135ZV-2 WHEEL LOADER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Measurement for Performance Check
Function and Structure Chassis
CHECK AND ADJUSTMENT CHASSIS
FUNCTION AND STRUCTURE POWER
CHECK AND ADJUSTMENT POWER
FUNCTION AND STRUCTURE TCAND TM
CHECK AND ADJUSTMENT TC AND TM
FUNCTION AND STRUCTION HYDRAULIC
CHECK AND ADJUSTMENT HYDRAULIC
FUNCTION AND STRUCTURE BRAKE
CHECK AND ADJUSTMENT BRAKE
FUNCTION AND STRUCTURE ELECTRICAL
ELECTRICAL HYDRAULIC DIAGRAM
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have KAWASAKI 135ZV-2 WHEEL LOADER Service Repair Workshop Manual.
Thanks for visiting!
Caterpillar cat 323 d sa excavator (prefix nes) service repair manual (nes000...jfdskekdmme
The document provides instructions for removing and installing the flywheel, flywheel housing, and crankshaft rear seal of a C6.4 engine. The flywheel is removed using lifting tools and bolts, while the flywheel housing requires removal of mounting bolts and contains a oil seal. Installation follows the reverse process, ensuring clean surfaces and applying retaining compound to mating parts. Special tools are specified for removing and installing the crankshaft rear seal and wear sleeve.
Caterpillar cat 325 b track type excavator (prefix 8pr) service repair manual...f98soeodidkdk
This document provides instructions for disassembling and assembling a travel motor. It includes 27 steps for disassembling components such as the head, brake piston, barrel assembly, and shaft assembly. It also includes 11 steps for assembling components like the lip seal, shaft assembly, cam plate, and springs back into the travel motor body. Special tools and precautions are noted to properly disassemble and reassemble the travel motor.
Caterpillar cat 325 b l track type excavator (prefix 8pr) service repair manu...f98soeodidkdk
This document provides instructions for disassembling and assembling a travel motor. It includes 27 steps for disassembling components such as the head, brake piston, barrel assembly, and shaft assembly. It also includes 11 steps for assembling components like the lip seal, shaft assembly, cam plate, and springs back into the travel motor body. Special tools and precautions are noted to properly disassemble and reassemble the travel motor.
Caterpillar cat 325 b track type excavator (prefix 8pr) service repair manual...fjsjjekdkme
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembling the travel motor which include removing components like the head, brake piston, barrel assembly, cam plate and shaft assembly. It then lists 26 steps for assembling the travel motor, assembling the components in reverse order and ensuring proper installation of seals, plates and alignment of parts. Safety notices are provided to properly contain fluids and avoid damage to components.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...orrf0370383
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing bolts, seals, plates, and other components. It then lists 26 steps for assembly, which involves cleaning components, applying seals and lubricants, and reinstalling components in reverse order of disassembly. Special care must be taken to align parts properly and not damage surfaces.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual Instant D...kubei069369925
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...jdksmmdmdd
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves 27 steps to remove components from the travel motor in the correct order. This includes removing the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly process reverses the disassembly with 27 steps and provides notices to ensure proper installation of seals, keys, and other components.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual Instant D...shanruliu7360
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual Instant D...rishang96299
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...fuusejkddmmd3e
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...dujkdksmdmdm
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves 27 steps to remove components from the travel motor in the correct order. This includes removing the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly process reverses the disassembly with 27 steps and provides notices to ensure proper installation of seals, keys, and other components.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...fujkse9didkke3
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing bolts, seals, plates, and other components. It then lists 26 steps for assembly, which involves cleaning components, applying seals and lubricants, and reinstalling components in reverse order of disassembly. Special care must be taken to align parts properly and not damage surfaces.
Caterpillar cat 315 d l excavator (prefix cjn) service repair manual (cjn0000...dkdmidkkdk
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves 27 steps to remove components from the travel motor body and head. Key steps include removing the head, brake piston, barrel assembly, shoe retainer and piston shoe assemblies. The assembly process reverses the disassembly with 27 corresponding steps, applying sealant and lubricant as needed and ensuring proper alignment of components.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...fjkdksmmdm
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves 27 steps to remove components from the travel motor in the correct order. This includes removing the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly process reverses the disassembly with 27 steps and provides notices to ensure proper installation of seals, keys, and other components.
Caterpillar cat 315 d l excavator (prefix cjn) service repair manual (cjn0000...fjjsekkdmme
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing bolts, seals, plates, and other components. It then lists 26 steps for assembly, which involves cleaning components, applying seals and lubricants, and reinstalling components in reverse order of disassembly. Special care must be taken to align parts properly and not damage surfaces.
Caterpillar cat 315 d l excavator (prefix cjn) service repair manual (cjn0000...fjsekdmmeed
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing bolts, seals, plates, and other components. It then lists 26 steps for assembly, which involves cleaning components, applying seals and lubricants, and reinstalling components in reverse order of disassembly. Special care must be taken to align parts properly and not damage surfaces.
This document provides instructions for disassembling and assembling the travel motor of a 323D and 323D L excavator. It describes 27 steps to disassemble the travel motor by removing components like the head, brake piston, barrel assembly, and shaft assembly. It then describes 13 steps to reassemble the travel motor by installing components like the shaft assembly, cam plate, barrel assembly, and head in the reverse order of disassembly. The goal is to disassemble and clean the travel motor prior to precise reassembly of all components.
The document provides step-by-step instructions for disassembling and assembling the travel motor of a 323D excavator. It details 27 steps for disassembly, removing components like the head, brake piston, barrel assembly, and shaft. It then outlines 24 steps for assembly, reinstalling these parts in reverse order and ensuring proper alignment of components like the cam plate and piston shoe assemblies. Special care is emphasized to keep parts clean and in their original positions.
This document provides instructions for disassembling and assembling the travel motor of a 323D and 323D L excavator. It describes 27 steps to disassemble the travel motor by removing components like the head, brake piston, barrel assembly, and shaft assembly. It then describes 13 steps to reassemble the travel motor by installing components like the shaft assembly, cam plate, barrel assembly, and head in the reverse order of disassembly. Precautions are given to clean parts thoroughly, mark components for reinstallation, and ensure proper alignment of parts.
Caterpillar Cat 323D and 323D L Excavator (Prefix SDC) Service Repair Manual ...fujkskemdmdm4r
The document provides step-by-step instructions for disassembling and assembling the travel motor of a 323D excavator. It details 27 steps for disassembly, removing components like the head, brake piston, barrel assembly, and shaft. It then outlines 24 steps for reassembly, replacing seals and installing components in the reverse order of removal to rebuild the travel motor. Special care is noted for aligning parts and preventing damage to surfaces.
Caterpillar Cat 323D and 323D L Excavator (Prefix SDC) Service Repair Manual ...fskekkdmdmdm3e
The document provides step-by-step instructions for disassembling and assembling the travel motor of a 323D excavator. It details 27 steps for disassembly, removing components like the head, brake piston, barrel assembly, and shaft. It then outlines 24 steps for assembly, reinstalling these parts in reverse order and ensuring proper alignment of components like the cam plate and piston shoe assemblies. Special care is emphasized to keep parts clean and in their original positions.
Similar to Caterpillar cat 325 c excavator (prefix csj) service repair manual (csj00001 and up) (20)
Caterpillar cat 325 l track type excavator (prefix 9kl) service repair manual...f98soeodidkdk
This service repair manual provides instructions for disassembling and assembling the main control valve for 325, 325L, and 325N excavator models. It lists 33 detailed steps to fully disassemble the main control valve and its various components. Identification marks should be placed on parts as they are removed. Cleanliness and lubrication of internal parts is important during the process.
Caterpillar cat 325 c mobile hyd power unit (prefix msg) service repair manua...f98soeodidkdk
The document provides instructions for removing and installing a crankshaft gear on a 3126B engine. It lists the required tools and steps to remove the crankshaft first before removing the gear using a bearing puller. The installation procedure is not described.
Caterpillar cat 325 c ln excavator (prefix csj) service repair manual (csj000...f98soeodidkdk
This document provides instructions for disassembling and assembling the travel motor of 325C excavator models. The disassembly procedure involves 27 steps to remove components like the head, brake piston, barrel assembly, and shaft assembly. The assembly procedure describes 22 steps including installing seals, plates, springs and ensuring proper alignment of components like the cam plate and keys. Special care must be taken when handling components and aligning parts to prevent damage during reassembly.
Caterpillar cat 325 c ln excavator (prefix crb) service repair manual (crb000...f98soeodidkdk
The document provides instructions for removing and installing the camshaft on a Caterpillar 3126B engine used in 325C excavators. The summary is:
1) Remove the lifter group and front cover to access the camshaft. Wire the valve lifters away from the camshaft. Remove the camshaft retainer plate and bolts, then remove the camshaft.
2) Install the camshaft, ensuring the timing marks are aligned. Install the camshaft retainer plate and bolts. Install the lifter group and front cover.
3) The document provides step-by-step instructions for removing and installing the camshaft, camshaft gear
Caterpillar cat 325 c l excavator (prefix csj) service repair manual (csj0000...f98soeodidkdk
This document provides the disassembly and assembly procedures for a 325C excavator travel motor. The disassembly procedure involves 27 steps to remove all components from the travel motor body. The assembly procedure describes 22 steps to reinstall all components in the reverse order, ensuring proper installation of seals, plates, springs and other parts. Precise alignment marks and original component positions are critical to correctly reassemble the travel motor.
Caterpillar cat 325 c l excavator (prefix crb) service repair manual (crb0000...f98soeodidkdk
The document provides instructions for removing and installing various engine components on a 325C excavator, including:
1. Removing the camshaft by wiring the valve lifters away, removing retaining bolts, and lifting the camshaft out.
2. Installing the camshaft by carefully lowering it into place while ensuring proper timing marks are aligned.
3. Removing the camshaft bearings using a special tool, and installing new bearings while orienting the oil holes correctly.
Caterpillar cat 325 c excavator (prefix crb) service repair manual (crb00001 ...f98soeodidkdk
The document provides instructions for removing and installing various engine components on a 325C excavator, including:
1. Removing the camshaft by wiring the valve lifters away, removing retaining bolts, and lifting the camshaft out.
2. Installing the camshaft by carefully inserting it into place while ensuring proper timing marks are aligned.
3. Removing the camshaft bearings using a special tool, and installing new bearings by orienting the oil holes and positioning joints.
Caterpillar cat 325 b ln excavator (prefix 8fn) service repair manual (8fn000...f98soeodidkdk
This document provides instructions for removing and servicing components of the rocker shaft and cylinder head on a 325B and 325B LN Excavator powered by a 3116 engine. The procedures include removing the rocker shaft assembly, disassembling the rocker shaft, inspecting components, assembling the rocker shaft, installing the rocker shaft and pushrods, and removing the cylinder head. Detailed steps are provided along with illustrations to guide the technician through the process while maintaining cleanliness and proper torque specifications.
Caterpillar cat 325 b ln excavator (prefix 6dn) service repair manual (6dn000...f98soeodidkdk
This document provides instructions for removing and installing inlet manifold components on a Caterpillar 325B excavator engine. The summary is:
1. Remove the valve mechanism cover and disconnect any attached pipes or solenoids from the inlet manifold.
2. Remove bolts securing the inlet manifold and remove the manifold and gasket.
3. To install the inlet manifold, position a new gasket and manifold on the engine and secure with bolts, reconnecting any pipes or solenoids.
Caterpillar cat 325 b l excavator (prefix 8rr) service repair manual (8rr0000...f98soeodidkdk
This document provides assembly instructions for the final drive of an excavator model 325B L. It describes:
1) Cleaning and preparing the final drive components and installing bearings in the main housing.
2) Determining the correct bearing preload and shim thickness to set the gear mesh.
3) Installing seals in the main housing and motor housing.
4) Assembling the carrier assemblies, installing gears, shafts, and retaining rings.
5) Positioning the main housing, gear, and ring gear on the motor housing and securing with bolts.
Caterpillar cat 325 b l excavator (prefix 6dn) service repair manual (6dn0000...f98soeodidkdk
This document provides instructions for removing and installing an inlet manifold on a Caterpillar 325B L excavator engine. It describes:
- Disconnecting air inlet piping and removing bolts to detach the manifold
- Installing a new gasket and reattaching the manifold using bolts torqued to 28 Nm
- Reconnecting any disconnected components at the end of the process
Caterpillar cat 325 b l excavator (prefix 2jr) service repair manual (2jr0000...f98soeodidkdk
This document provides instructions for installing pistons and connecting rods in a 3116 engine. It describes cleaning and lubricating parts, inserting piston rings into the cylinder bore using a compressor tool, installing each piston and connecting rod assembly by aligning it with the crankshaft, and torquing the connecting rod cap bolts. References are provided for determining whether pistons, connecting rods, pins, and bushings can be reused.
Caterpillar cat 325 b l excavator (prefix 1hs) service repair manual (1hs0000...f98soeodidkdk
This document provides instructions for disassembling and assembling the travel motor of a 325B L excavator. It outlines 27 steps to disassemble the various components of the travel motor including removing the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. It then describes the 25 steps to reassemble these components, noting the proper order and orientation needed to ensure correct assembly. Precautions are highlighted such as applying identification marks and cleaning components thoroughly before assembly.
Caterpillar cat 325 b l excavator (prefix 1gs) service repair manual (1gs0000...f98soeodidkdk
The document provides disassembly and assembly instructions for the final drive of a 325B L excavator. It details 33 steps to disassemble the final drive components including removing carriers, gears, seals and bearings. It also outlines 28 steps for reassembling the final drive, including pressing in bearings, determining the correct shim thickness, installing seals and gears, and torquing bolts. Tools and torque specifications are provided. The purpose is to provide maintenance technicians with a procedure to fully disassemble and reassemble the excavator's final drive system.
Caterpillar cat 325 b excavator (prefix 8rr) service repair manual (8rr00001 ...f98soeodidkdk
This document provides assembly instructions for the final drive of an excavator model 325B L. It describes:
1) Cleaning and preparing the components, installing bearings in the main housing, and determining the correct shim thickness for the gear.
2) Installing seals in the main housing and motor housing.
3) Assembling the carrier assembly by installing planetary gears, shafts, and pins.
4) Positioning the main housing, gear, and ring gear on the motor housing and securing them with bolts.
Caterpillar cat 325 b excavator (prefix 8gm) service repair manual (8gm00001 ...f98soeodidkdk
This document provides instructions for disassembling and assembling the mechanical actuated fan on an excavator model 325B. It describes removing the fan blades, mounting hardware, oil, and performing a pressure test on the hub assembly. Further steps include removing the bellcrank, control shaft, hub assembly, through shaft, carrier/spool, main bearing, and rear seal. Detailed illustrations accompany each step to aid in failure analysis and repair.
Caterpillar cat 325 b excavator (prefix 8fn) service repair manual (8fn00001 ...f98soeodidkdk
This document provides instructions for removing and installing a cylinder head on an excavator. It begins by listing other components that must first be removed, such as the fuel filter base, governor, fuel linkage, and manifolds. The removal procedure then instructs technicians to attach a lifting device to the cylinder head and remove bolts holding it to the cylinder block before removing the gasket. The installation procedure lists cleaning the mating surfaces and applying lubricant to the gasket before positioning the head and torquing the bolts to specifications.
Caterpillar cat 325 b excavator (prefix 6dn) service repair manual (6dn00001 ...f98soeodidkdk
This document provides instructions for removing and installing an inlet manifold on a Caterpillar 325B L excavator engine. It describes:
- Disconnecting air inlet piping and removing bolts to detach the manifold
- Installing a new gasket and reattaching the manifold using bolts torqued to 28 Nm
- Reconnecting any disconnected components at the end of the process
Caterpillar cat 325 a l track type excavator (prefix 9 kl) service repair man...f98soeodidkdk
The document provides instructions for disassembling and assembling the main control valve for 325, 325L, and 325N excavators. It describes removing over 30 components of the valve including pressure control valves, check valves, relief valves, spools, housings, and covers. Detailed steps are provided for disassembling each component and removing seals, springs, plugs, and other parts. Similar instructions are given for reassembling the valve and installing all components back in their original locations with new seals and lubrication. Safety notices are included to properly secure parts when removing and to clean and inspect all components before reassembly.
Caterpillar cat 325 track type excavator (prefix 9 kl) service repair manual ...f98soeodidkdk
This service manual provides instructions for disassembling and assembling the main control valve for 325, 325L, and 325N excavator models. It details removing over 30 individual components of the valve including pressure control valves, check valves, relief valves, spools, seals and more. Dismantling and cleaning procedures are described along with proper reinstallation of all parts in their original locations and orientations.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325C EXCAVATOR CSJ
Configuration: 325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Engine
Disassembly and Assembly
325C Excavator Machine Systems
Media Number -RENR5367-11 Publication Date -01/01/2012 Date Updated -17/02/2017
i01734747
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Start By:
A. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the outside of the travel motor prior to disassembly.
2. Fasten the travel motor to a suitable holding fixture in a vertical position. The weight of the
travel motor is 60 kg (132 lb).
3. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the head's original position on the body of the
travel motor.
1/9
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00510326
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
4. Remove bolts (1) .
5. Remove head (2) from the body of the travel motor.
Illustration 2 g00510341
2/9
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 3 g00510349
6. Turn over head (2) .
7. Remove O-ring seal (6), shims (5), port plate (4), and bearing (3) from the head.
8. Remove the check valve assemblies from the head.
Note: There is a retainer under spring (9). This retainer is a press fit in head (2). Do not
remove the retainer.
9. Insert a dowel rod with a small diameter into Hole (X). Tap the dowel rod with a plastic
hammer in order to remove spring (9), poppet (8), and seat (7) from the head.
Illustration 4 g00510351
10. Remove three fittings (10) and plugs (11) from the head. Remove the O-ring seal from each
fitting.
Illustration 5 g00878239
11. Remove O-ring seals (13) and washer set (12) from the body of the travel motor.
3/9
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 12. Place a shop towel over brake piston (14). Retain brake piston (14) by hand, and apply
approximately 525 kPa (75 psi) of shop air pressure to brake release Port (Y). Make sure
that the shop air pressure is free of water. Brake piston (14) will move up the piston guide,
and out of the piston guide. Remove brake piston (14) from the body of the travel motor.
Illustration 6 g00878248
13. Remove O-ring seal (16) from the brake piston. Remove backup ring (15) from the brake
piston.
14. Remove O-ring seal (17) from the brake piston. Remove backup ring (18) from the brake
piston.
Illustration 7 g00510356
15. Remove piston guide (19), five friction plates (20) and the four steel plates from the body of
the travel motor.
4/9
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 8 g00510359
16. Remove O-ring seal (21) from the piston guide. Remove backup ring (22) from the piston
guide.
Illustration 9 g00510365
Note: Do not allow the components of barrel assembly (23) to come apart during the
removal from the travel motor. All of the components in the barrel assembly must be
reinstalled in the component's original location.
17. Use two large screwdrivers, as shown. Slowly remove barrel assembly (23) from the body
of the travel motor. Do not allow the components to fall apart.
5/9
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 10 g00878253
Note: Shoe retainer (24) and piston shoe assemblies (25) are nonserviceable separately.
Prior to the removal of the shoe retainer and the piston shoe assemblies from barrel (26), put
identification marks on piston shoe assemblies (25) for assembly purposes. Identification
marks are used to identify the piston shoe assembly's location in shoe retainer (24) and
barrel (26). The piston shoe assemblies must be reinstalled in the piston shoe assembly's
original bores in the shoe retainer and the barrel.
18. Remove shoe retainer (24) and piston shoe assemblies (25) from barrel (26). Separate the
piston shoe assemblies from the shoe retainer.
Illustration 11 g00510504
19. Remove guide (27), spacer (28), and springs (29) from the barrel.
6/9
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 12 g00510547
20. Remove cam plate (30) from the body of the travel motor.
Illustration 13 g00510550
21. Remove two keys (31) and the two locating pins (not shown) from the body of the travel
motor.
Illustration 14 g00510551
7/9
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 22. Remove O-ring seal (33) from the body of the travel motor.
23. Use a soft faced hammer to remove shaft assembly (34) from the body of the travel motor.
Remove the shaft assembly in the direction that is indicated by the arrow. Refer to
Illustration 14.
Illustration 15 g00510595
24. Remove retaining rings (35) from each side of bearing (36). Push shaft (34) out of bearing
(36) with a press.
Illustration 16 g00510598
25. Remove inner race (37) from shaft (34) .
8/9
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 17 g00510599
26. Remove lip seal (38) from the body of the travel motor.
Illustration 18 g00510605
27. Remove two stoppers (39) and the two pistons from the body of the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Jul 12 12:14:52 UTC+0800 2020
9/9
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325C EXCAVATOR CSJ
Configuration: 325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Engine
Disassembly and Assembly
325C Excavator Machine Systems
Media Number -RENR5367-11 Publication Date -01/01/2012 Date Updated -17/02/2017
i01706705
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
1. Make sure that all of the components of the travel motor are thoroughly clean and free of
dirt and debris prior to assembly.
Illustration 1 g00510595
2. Install retaining ring (35) in the groove on shaft (34).
3. Install bearing (36) on shaft (34) with a press. Install the bearing until the bearing contacts
the retaining ring.
1/10
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. 4. Install the other retaining ring on the opposite side of bearing (36).
Illustration 2 g00510598
5. Install inner race (37) on the end of shaft (34) until the inner race is seated against the
shoulder on the shaft.
Illustration 3 g00651891
(a) Body
6. Apply a thin coat of 5P-3413 Pipe Sealant on Surfaces (Y) of the body of the travel motor.
7. Use Tooling (A) in order to install lip seal (38).
8. Install lip type seal (38) in the body of the travel motor. Install the lip seal so that the sealing
lip is facing in the direction that is shown. Make sure that the lip seal contacts the
counterbore in the body of the travel motor.
Note: Slowly rotate shaft assembly (34) during the installation in order to make sure that the
shaft assembly does not bind in the body of the travel motor.
9. Apply clean hydraulic oil on the lip of lip seal (38).
2/10
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 10. Use a press to install shaft assembly (34) in the body of the travel motor. Slowly rotate the
shaft during the installation in order to make sure that the shaft does not bind. Make sure
that the bearing on the shaft contacts the counterbore in the body of the travel motor.
Illustration 4 g00651960
NOTICE
The locating pin on each key is not centered. In order to prevent
damage to the barrel assembly during assembly of the travel motor, the
keys must be installed as shown. Also, the keys must be installed in the
key's original location in the body of the travel motor.
11. Install the two locating pins and two keys (31) in the body of the travel motor, as shown.
Illustration 5 g00510547
3/10
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 12. Install cam plate (30) in the body of the travel motor in the cam plate's original location.
Make sure that the two pistons and two keys (31) in the body of the travel motor engage
properly with the cam plate.
Illustration 6 g00510504
13. Install nine springs (29) in the barrel. Install spacer (28) and guide (27) on the barrel.
Illustration 7 g00878253
14. Install piston shoe assemblies (25) in the piston shoe assembly's original bores in shoe
retainer (24).
15. Apply clean hydraulic oil in the bores of the barrel and on piston shoe assemblies (25).
Install the piston shoe assemblies with the shoe retainer in the piston shoe assembly's
original bore in barrel (26).
NOTICE
Make sure that the cam plate is correctly engaged with the two pistons
in the body of the travel motor prior to installing the barrel assembly.
When the body of the travel motor is tilted to allow the installation of
the barrel assembly, the cam plate can slide off of the two pistons. The
remaining parts of the travel motor can be assembled with the cam
plate in the incorrect position.
4/10
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Extensive damage will result from the incorrect installation of the cam
plate. Follow the exact installation procedure to prevent damage.
16. Apply clean hydraulic oil on the sliding surfaces of the cam plate, on the piston shoe
assemblies and on the splined shaft of the travel motor.
Illustration 8 g00485953
17. Route a piece of strong string through an opening for the cam plate tension adjusters. Route
the string over the sliding surface of cam plate (30) and through the opposite opening for the
cam plate tension adjusters. Hold the string taut in order to keep cam plate (30) correctly
engaged with keys (31). Keep the string taut and position the body of the travel motor on the
body's side. Do not release the tension on the string at this time. Install barrel assembly (23)
as a unit on the shaft. Pull the string out of the body of the travel motor. It may be necessary
to pull the barrel assembly and the piston shoe assemblies away from the cam plate slightly
in order to release the string.
Illustration 9 g00651967
5/10
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 18. Install O-ring seal (21) and backup ring (22) on piston guide (19), as shown.
Illustration 10 g00510356
19. Place the body of the travel motor in a vertical position.
20. Apply clean hydraulic oil on five friction plates (20) and the four steel plates. Install the
plates in alternating order in the body of the travel motor. Start with a friction plate and end
with a friction plate.
21. Install piston guide (19) in the body of the travel motor until the piston guide contacts the
counterbore in the body of the travel motor.
Illustration 11 g00878297
Note: Make sure that brake piston (14) is thoroughly clean and free of dirt and debris.
22. Install O-ring seal (16). Install backup ring (15).
23. Install O-ring seal (17). Install backup ring (18).
6/10
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 24. Apply a thin coat of hydraulic oil on the surfaces of piston (14) which contact the body of
the travel motor. Install piston (14) in the body of the travel motor by hand. It may be
necessary to use a soft faced hammer to seat the piston correctly.
Illustration 12 g00878299
Illustration 13 g00878239
25. Install washer set (12) in piston (14), as shown.
26. Install O-ring seals (13) in the body of the travel motor, as shown.
7/10
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 14 g00510605
27. Install the two pistons and two stoppers (39) in the housing of the travel motor. Tighten the
stoppers to a torque of 140 ± 14 N·m (105 ± 10 lb ft).
Illustration 15 g00510351
28. Install the O-ring seals on fittings (10). Apply 5P-3413 Pipe Sealant on the threads of
fittings (10). Install the fittings in the head, as shown.
29. Install plugs (11) in the head. Tighten each plug to a torque of 15 ± 2 N·m (11 ± 1 lb ft).
Illustration 16 g00510349
8/10
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 17 g00510341
30. Apply a thin coat of 9S-3263 Thread Lock Compound on the threads of the two check
valves. Install the check valves in the head.
31. Install seat (7), poppet (8) and spring (9) in the head at Location (X).
32. Install O-ring seal (6) in the head, as shown.
33. Install bearing (3) in the head until the bearing contacts the counterbore in the cover.
34. Apply 1U-6396 O-Ring Assembly Compound on port plate (4). Install the port plate in the
port plate's original position on the motor cover.
35. Use a shim or shims (5) so that the following requirements are met.
Note: During the following checks, turn the travel motor output shaft in a clockwise
direction.
a. The travel motor output shaft does not rotate with an applied torque of 440 N·m
(325 lb ft) or more with the parking brake release port open.
b. The travel motor output shaft rotates with an applied torque of 29 N·m (21 lb ft) or
less when the parking brake release port is pressurized to 780 kPa (115 psi) with both
the inlet port and the outlet port open to the hydraulic oil tank.
Note: It may be necessary to remove head (2) several times in order to determine the correct
thickness of shim or shims (5) that are used to adjust the rolling torque of the travel motor
output shaft.
36. Apply a thin layer of 5P-0960 Molybdenum Grease on shim or shims (5). Install the shim or
shims on the head. The grease will hold the shim or shims in place during the installation of
the head. Install the head on the body of the travel motor.
9/10
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 18 g00510326
37. Place head (2) in the head's original position on the travel motor. Install socket head bolts
(1) that secure the head. Tighten the socket head bolts to a torque of 175 ± 18 N·m
(130 ± 13 lb ft).
NOTICE
To prevent possible damage to the travel motor, fill the unit with oil at
least to the fill port before operating the machine. Refer to the
Operation and Maintenance Manual for the correct oil specification.
End By:
a. Install the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Install" in this
manual.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Jul 12 12:15:48 UTC+0800 2020
10/10
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 E...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325C EXCAVATOR CSJ
Configuration: 325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Engine
Disassembly and Assembly
325C Excavator Machine Systems
Media Number -RENR5367-11 Publication Date -01/01/2012 Date Updated -17/02/2017
i03808350
Travel Motor - Install
SMCS - 4351-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7692 Threaded Rod 2
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the mating surfaces of the travel motor and the final drive.
1/4
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 1 g00878123
2. Install new O-ring seal (6) . Apply clean hydraulic oil on the O-ring seal.
Illustration 2 g00707267
3. Attach a suitable lifting device to travel motor (4) , as shown.
4. The weight of the travel motor is approximately 57 kg (125 lb).
Illustration 3 g00878121
2/4
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. 5. Carefully install travel motor (4) onto Tooling (A) . Slide the travel motor into the final
drive.
6. Install one of three bolts (5) that secures the travel motor to the final drive.
7. Remove Tooling (A) .
Illustration 4 g00707275
Typical example
8. Install remaining bolts (2) .
9. Connect hose assembly (3) . Connect hose assembly (1) .
10. Fill the final drive with oil.
ReferenceRefer to Operation and Maintenance Manual, "Lubricant Viscosities" for the
proper oil viscosity.
ReferenceRefer to Operation and Maintenance Manual, "Final Drive Oil Level - Check" for
the correct filling procedure.
11. Install high efficiency filters in place of the pilot filter, the case drain filter, and the return
filter.
Note: High efficiency filters should not be run for more than 250 hours before you change
back to the standard filters.
12. Obtain a hydraulic oil sample from the main S·O·S port.
ReferenceRefer to Operation and Maintenance Manual, "Sampling Interval and Location of
Sampling Valve" for the correct location.
13. If the S·O·S sample exceeds ISO 18/15, flush the hydraulic system.
ReferenceRefer to Contamination Control Guidelines, SEBF8436, "Hydraulic System
Flushing Procedure for 322C Hydraulic Excavators" for further information.
3/4
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. End By: Install the travel brake valve. Refer to Disassembly and Assembly, "Travel Brake Valve
- Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Jul 12 12:16:44 UTC+0800 2020
4/4
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325C EXCAVATOR CSJ
Configuration: 325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Engine
Disassembly and Assembly
325C Excavator Machine Systems
Media Number -RENR5367-11 Publication Date -01/01/2012 Date Updated -17/02/2017
i05453056
Final Drive - Remove
SMCS - 4050-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
8S-7611 Handle As 2
8S-7615 Pin As 2
283-1495 Stand Assembly 2
B 439-3939 Link Bracket As 2
C
154-6184 Forcing Bolt (M 20) 2
154-6185(1)
Forcing Bolt (M 24) 2
(1)
For Use on 329 and 330 sales models
Start By:
a. Separate the track assembly.
b. Remove the travel motor.
1/3
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 1 g00489826
Typical Example
Note: Adjust the height of Tooling (A) so that there is sufficient clearance between the
sprocket and the track for the removal of the final drive.
1. Lift the side of the machine in order to install Tooling (A) under the frame, as shown.
Illustration 2 g00712767
2. Fasten Tooling (B) and a suitable lifting device to final drive (1), as shown. Put a slight
lifting tension on the final drive.
Illustration 3 g00712737
2/3
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...