jragojo CV

Jragojo CV 1
R E S U M E
Personal Information
POSITION : CSU Electrical Commissioning Engineer
NAME : Julito H. Ragojo
PASSPORT NUMBER : EB-9149667
NATIONALITY : Filipino
DATE OF BIRTH : JULY 26, 1962
ENGLISH PROFICIENCY : Very Good
EDUCATIONAL BACKGROUND : Bachelor of Science in Electrical Engineering
Bachelor of Science in Industrial Technology
ADDRESS : # Sevilla Center, San Fernando City, La Union,
Philippines
# 18 Jalan Sierra Perdana 1/9, Taman Sierra Perdana
81750 Masai, Johor Malaysia
TEL. NO. : +60127760398;+60137510398 Malaysia line
+639999244952 Philippine line
Personal e-mail address : jhragojo@yahoo.com
------------------------------------------------------------------------------------------------------------
TRAINING ATTENDED
1. Pause Training for Shell
2. SAEP Training in Shell Brunei training Centre
3. Designated First Aid Training
4. ISSOW training (Certified Level 1A & 2)
5. CMS Training program (Conducted in MMHE GKKL office in Kuala Lumpur)
6. IPOP (Implementation of Project on Paper)
7. PTW training (certified Applicant and Management) conducted by SSB
8. Shell’s policy on Conflict of interest online training
9. EPTW (Electrical Permit to Work system) conducted by Sarawak Shell Berhad
10. ESR (Electrical Safety Rules) Training conducted by Sarawak Shell Berhad
11. AEP/CEP certified Seminars and training conducted by Sarawak Shell Berhad
12. Lesson Learnt program by Sarawak Shell Berhad
13. WINPCS training and implementation program
14. Basic Supervisory and foremanship development
15. Productivity improvement for project supervisor
16. Project planning and control for management and supervisor

Jragojo CV 2
17. Industrial occupational safety and health
18. Process and control instrumentation
19. Sea survival and Huet
20. NIOSH Training
21. Confined Space Training
22. Power switchboard switching and operation (National Power Corporation Philippines)
23. Electrical controls and instrumentation competency training (NMYC Philippines)
SUMMARY OF EXPERIENCES
Twenty one (23) years of working experience in onshore/offshore oil and gas industries, refineries with different
phases of electrical engineering practice ranging from electrical/instrument, estimating, Work pack, Commissioning,
start-up and maintenance.
Currently working for GUMUSUT project under SSPC as CSU Electrical Commissioning Engineer & EX
Inspection lead.
Thai Nippon Steel Engineering, Bangkok Thailand as Electrical Commissioning Engineer under Offshore services
department for Myanmar Booster Compression Platform.
MMHE Kuala Lumpur and Pasir Gudang as MC (Mechanical Completion) Engineer under CMS (Completion
Management System) for GUMUSUT Kakap Project of Sabah Shell Petroleum Company.
Sarawak Shell Berhad as Electrical Commissioning Engr. for the E11 HUB complex (E11PB, E8DR-A,
F13SCDR-A, F13W, E11K-A and SCDR-A Platform, Helang Platform for Nippon Oil located in Sabah Waters,
FPSO Bunga Kertas for MISC, Guntong Platform for Exxon Mobil assigned as Electrical commissioning for the
fabrication, pre-commissioning, offshore hook-up and commissioning, Malaysia Shipyard and Engineering (Now
MMHE), Brook Dockyard Engineering and Ramunia Fabricators Sdn. Bhd.
Oil and Natural Gas commission of India as Electrical/ Instrument commissioning Supervisor for the hook- up
and commissioning of ONGC BPB Phase-1 & Phase 2 complex in Bombay India
Assigned as Electrical/Instrument Commissioning Engineer to Bayan Gas & D-35 Complex Project for Sarawak
Shell Berhad under Shapadu Engineering
Vast experience in fabrication and pre-commissioning of five offshore production platforms for EPMI-Esso
production of Malaysia Incorporated. Assigned as an electrical/instrument section head for the complete
fabrication and pre-commissioning of the project. Coordinates and administers the projects to ensure construction
and pre-commissioning meets the quality of work, schedules, specifications, applicable engineering codes and
standards. Prepares commissioning and acceptance report for the hand-over of the projects. Project evaluation and
cost analysis of all completed projects.
Hook-up and commissioning of eight EPMI-Production platforms, six gas compression module and one gas
compression/dehydration module, supervise electrical/instrument hook-up, commissioning, start-up and
maintenance of process and utilities instrument and electrical equipment. Hand-over to operation and maintenance
all the system of process-utilities and electrical equipment of the production platforms and living quarters.
Involved in preparation of bid proposals, detail engineering, designing, and estimating and project execution.
Assigned as checker for electrical/Instrument drawings for construction, estimates, materials and cost of schedule
network, manpower, equipment and test equipment schedule in preparation for the project execution. Prepares
installation and commissioning procedures of process instruments and electrical equipment.
Four years’ experience in the maintenance of industrial plant, power plant, heavy fabrication equipment and US
army ship facilities. Prepares routine inspection, periodic maintenance, history chart records of electrical equipment
and preventive maintenance. Performs operational load test of diesel and gas turbine generators.

Jragojo CV 3
DETAILS OF EXPERIENCES
GUMUSUT KAKAP FPS PROJECT FOR SABAH SHELL PETROLEUM COMPANY
APRIL 09, 2009 TO PRESENT
Position: CSU Lead Electrical Engineer and EX inspection Lead
Location: Gumusut Kakap Semi-FPS Sabah Waters
Duties:
 Prepare CSU work plan and work permits for the task
 Review and execute relay protection setting parameters as per approved relay coordination study
 Pre-comm./Commissioning of power generation system and power distribution system as per design
philosophy
 Assist other discipline in the cause and effect matrix testing
 Generate red line and mark up drawings and STQ’s
 Prepare ITR-B’s for pre-commissioning and commissioning activities as per project requirements
 Prepare Mechanical Completion Manual and Completion summaries as per design requirements
 Review and comment engineering documents, drawings as per project specifications and requirements
 Raised Discrepancy reports on engineering document omissions and errors
 Review P&ID and comment any errors on Tagging and design.
 Review vendor’s packages and raised comments on non-compliance with regards to design, installation and
materials.
 Conduct daily meetings with MC Teams on the daily MC Activities and raised concerns on the ongoing site
activities
 Discuss with relevant Discipline engineers on the rectifications, omissions and errors of drawing and providing
specific solutions on solving the design discrepancies as per design specification.
 Site verification and inspection on MC requirements and raised comments on the non-conformance activities.
 Generate and produce ITRs/Check sheets specific to system tags as per client requirements.
 Define the sub-systems into practical Mechanical Completion Packages and identify locations where MC
activities will take place.
 Update completed ITRs/check sheets- schedule progress
 Initiate ITR-A check sheets when construction activities have been completed and Handover by QC
 Review status of MC activities via OCMS report
SARAWAK SHELL BERHAD – EPA-T-EG-E11 HUB PROJECTS (DRILLING, COMPRESSION, AND
POWER GENERATION PLATFORMS)
July 05, 2005 to January 31, 2009
Position: Electrical Commissioning Engineer
Location: E11 HUB projects, Johor Fabrication yard and Sarawak Offshore
Duties:
 Construction and Commissioning of E11 Hub projects for shell until Start-up and production in Offshore
Sarawak Waters.
 Preparing Installation and Commissioning procedures, Job cards, Work pack for Offshore HUC. Testing and
commissioning.
 As-built preparation and final documentation prior to platform commissioning hand-over
 Review Design drawings as per project specification
 Generate commissioning execution plan and schedules
 Prepare STQ’s

Jragojo CV 4
 Conduct daily toolbox meeting for commissioning activities and sharing of Safety knowledge to workers
 Prepare Permit to work and JHA for the commissioning activities
 Prepare SPIR and start-up spares for commissioning
RAMUNIA FABRICATORS SDN BHD
May 2003 to July 2005
Position: Electrical Commissioning Engineer
Location: Teluk Ramunia, Johor Bahru Malaysia
Duties:
 Construction and Commissioning of GUF & IBC topsides for Exxon Mobil and SFK-A topsides & E8DR-A
Drilling platform for Sarawak Shell Berhad & Sabah Shell Petroleum Company
commissioning.
 Commissioning of power generation, switchboard, distribution, MCC, power and process equipment/controls
MALAYSIA SHIPYARD AND ENGINEERING (now MMHE)
June 1999 to April 2003
Position: E & I Commissioning Engineer.
Location: Pasir Gudang, Johor Bahru West Malaysia
Duties:
 Review AFC drawing and involved in preparation of work pack, job cards, materials Take-off, drawing, check
sheets, and commissioning procedures.
 Construction and Commissioning of MISC FPSO topsides for PETRONAS Carigali, Helang Integrated
Topsides for Nippon Oil, Larut –A Topsides for ESSO PROD. MALAYSIA INC, E11K – topsides for Sarawak
Shell Berhad particularly testing and commissioning of medium voltage and high voltage switchgears. Prepare
work pack, test plan, procedures and work schedule plan for testing of all electrical apparatus as per systems.
 Coordinates with discipline inspectors, PMT and commissioning supervisor in testing and inspection activities
particularly in applying the basic practices and general specifications/standards to ensure the quality of job.
 Involves in material receiving inspection and factory acceptance testing and generate deficiency report base on
testing and workmanship as per project requirements.
 Monitor the daily progress on installation and construction to ensure that the quality of job will be applied as
per project requirements and for commissioning schedule, general specs and basic practices.
 Conduct daily meeting regarding the testing activities. Coordinating with other discipline on problems of
construction and inspection and generate solutions to resolve any problem that may arise in the course of testing
and commissioning.
 Coordinates with material receiving inspector for E&I instrument and equipments base on client’s requirements
and as per specifications in order to plan for testing and calibration.
 Generates outstanding work list for construction and commissioning and coordinates with other discipline on
construction matters that may conflicts to installation and commissioning activities.
 Monitor commissioning punch list and conduct daily meeting on punch list progress with respect to quality &
commissioning matters and by applying international standards.
 Generate check sheet overview for construction and commissioning by viewing system basis.

Jragojo CV 5
BROOK DOCKYARD ENGINEERING CORPORATION
December 1998 to May 1999
Position : E & I Commissioning Engineer.
Location: Kuching, Sarawak Malaysia
Duties:
 Involved in preparation of work pack, job cards, materials take-off, drawing, check sheets, and commissioning
procedures.
 Prepare work schedule for testing and commissioning and arrange all testing equipment necessary in the
execution of the work. Ensure that all the necessary instruments and equipment are pre-tested, pre-calibrated
and certified by Malaysian Certifying Authority.
 Daily inspection and supervision of E&I works and to ensure that works are in accordance to the design plans
and specifications prior to testing.
 Responsible in engineering techniques and procedure in solving problems in the course of construction and
commissioning.
 Undertake close monitoring and coordination with managers and other concerned personnel for the timely
completion of the project based on the general project schedule.
SABAH SHIPYARD SDN.BHD
July 1996 to November 1998
Position : E & I Commissioning Engineer.
Location: Federal Territory Labuan
Duties:
 Responsible for the hook- up and pre- commissioning of electrical and Instrumentation work of Pakistan’s
Power Barge and Kinabalu Platform for Sabah Shell Berhad Project.
commissioning.
 Prepare testing plan and set-up testing facilities
 Supervising a team of Commissioning g technicians in conducting simulation testing and functional testing of
high and low voltage switchgear, protection relays, workstation, DCS, Fire and Gas, SDS PA and
Telecommunication and other testing take charge of all plant operation
 Cary out logic test on serial link MCC and to set in accordance to equipment setting and retest to prove the
correctness of settings and connections.
 Review Construction and commissioning check sheets and compiled as per system

Jragojo CV 6
SHAPADU ENERGY AND ENGINEERING SDN.BHD
June 1994 to June 1996
Position : Electrical Commissioning Engineer.
Location: D35 Complex for Sarawak Shell Berhad in Binttulu Offshore, MNLG-2 and BSTAB 3&4 Bintulu
Duties :
 Responsible for all electrical and instrumentation engineering, installation and commissioning works.
 Participated together with the team of Shell personnel and staff in the fabrication, installation, pre-
commissioning and commissioning of Malaysia Liquefied Natural Gas (MLNG) and Bintulu Stabilizer project
with a standby generator of 1,750 KVA, two sets of flash gas turbine compressors, 3 sets of instrument air
compressors, 1 substation consisting of motor control center high and low voltage switchgears.
 Prepare work plan for fabrication and installation. Set up catch-up plan for project completion date.
 Undertake calibration of protective relays such as over/under voltage relays, over current relays, duct testing of
high and low voltage bus bars, high pot testing of transformers, high voltage cables and bus bars.
 Perform and generates as-built drawings for construction and testing/commissioning.
 Monitoring balance of work and generates construction and commissioning punch list.
 Commissioning of thyristor control panels, battery chargers and UPS systems.
MALAYSIA SHIPYARD AND ENGINEERING SDN. BHD.
September 1993 to May 1994
Position : E & I Commissioning Supervisor
Location: Pasir Gudang Johor, Malaysia
Duties:
 Supervise the hook-up and pre-commissioning of MCC, control panel, Equipment, DC/AC Drive control panel
and instrument.
 Conduct testing and commissioning of power generator including calibration of circuit breakers (Current
injection test) of overload thermal relays, under voltage relays, earth fault relays and simulation test of motor
control thru DCS, SDS control panels
 Commissioning of 6.6KV switchgear inclusive of functional testing of protective relays such as reverse power,
over/under voltage relays, ducter testing of bus bars, high pot testing of transformers, functional testing and
commissioning of battery chargers and UPS systems.
 Supervising a team of Commissioning g technicians in conducting simulation testing and functional testing of
high and low voltage switchgear, protection relays, workstation, DCS, Fire and Gas, SDS PA and
Telecommunication and other testing take charge of all plant operation
 Cary out logic test on serial link MCC and to set in accordance to equipment setting and retest to prove the
correctness of settings and connections.
 Review Construction and commissioning check sheets and compiled as per system
SABAH SHIPYARD SDN. BHD.
June 1992 to August 1993
Location: Federal Territory Labuan, Malaysia

Jragojo CV 7
Duties :
 Prepares electrical/instrumentation commissioning scope of work, test sheets and schedule.
 Check AFC approved for construction drawing and installation to ensure that meets the design philosophy,
relevant codes and specifications.
 Commissioning of process/utilities instruments and electrical equipment, hand-over to production for
acceptance with complete test sheets and certificates.
 In- charge for GPA/PAPA modifications/ standardization project to all onshore/ offshore facilities – work pack
preparation, commissioning and handover the project to operation. Review TSA (Technical Safety Audit project
drawings and design Philosophy.
 Commissioning of Fire & Gas, PA, Telecommunications and SDS systems.
 Carry out pre-commissioning and commissioning of High/low voltage switchgears, UPS, Chargers and loop
checking of field instruments. Conduct shutdown matrix test.
 Trouble shooting of tower cranes, loop checking and insulation testing of motors.
 Assisting senior engineers in project estimating and tendering
 Preparing work plan for pre-commissioning activities as per CPN
 Generates check sheets overview as per system
ONGC PROJECT BOMBAY HIGH INDIA
February 1989 to October 1991
Location: Bombay High, India
Duties :
 Supervise and initiate hook- up and pre- commissioning of gas turbine and diesel, generator, gas compressor,
fire pump, chillers units, HVAC unit, utilities equipment, MCC and switchgear panel, fire/ gas panel, process
instrument and shutdown panel and metering panel.
 Assist in the start- up of oil and gas production platform.
 Prepares acceptance and calibration test report for electrical equipment and process instrument.
 Calibration of instruments, inspection repair and preventive maintenance of electrical equipment and process
instruments.
 Prepare test instruments and testing facilities
 Conduct Tool box meeting
 Carryout construction installation inspection prior to pre-comm./commissioning of the system
 Generate commissioning punch list for vendor’s packages
 Prepare commissioning as-built
 Compile construction and commissioning check sheets as per system handover
AG&P Co. OF MANILA INC. BATANGAS, PHILIPPINES
May 1984 to January 1989
Position : E & I Commissioning Technician/Field Engineer
Location: Bauan Batangas, Philippines, Iraq and India
Duties :
 Started as Electrical Technician and promoted as Electrical field Engineer for the following projects: BPB
Complex ONGC, India-1990-91, NKK / ICG (Bombay, India-1989-90, AG&P Yard batangas-1985-87, AG&P
Technip France in Iraq-1984-85.

Jragojo CV 8
 Include the onshore/offshore preventive maintenance programming along with the preparation of the (MJR)
maintenance job routine cards, updating and monitoring the P. M’s and C.O.S. in MAIS maintenance
administration and information system. Carry out technical field surveys and preparing EMPC (Field Manage
Plant Change) including material take- off, labour cost and budget
 As a team member for the engineering construction, testing and commissioning (Electrical & Instrumentation)
of the platform, this was fabricated in AG&P yard, delivered to Bombay India and hook-up commissioned by
AG&P.
 Part of the installation crew and testing/commissioning crew for the functional testing of 8unit Saft nife battery
charger, calibrations of thermal overload relays and power factor relays, simulation test of interposing relay
panel.
 Trouble shooting of tower cranes, loop checking and insulation testing of motors.
 Assisting senior engineers in project estimating and tendering
 Preparing work plan for pre-commissioning activities as per CPN
 Generates check sheets overview as per system
EDUCATIONAL BACKGROUND AND QUALIFICATION
Course : B.S. Industrial Technology Major in Electrical
School : Don Mariano Marcos Memorial State University San Fernando
La Union Philippines (DMMMSU-MLUC)
Date Graduated : 2014 under DMMMSU-MLUC ETEEAP program (Expanded Tertiary
Education Equivalency and Accreditation Program)
Course : B.S Electrical Engineering
School : Saint Louis University, Baguio City Philippines
Date Graduated : 1983 irregular Electrical engineering
Course : B.S Business Administration Major in Business Management
(Irregular)
School : Don Mariano Marcos Memorial State University San Fernando
La Union
Date Graduated : 1990 irregular
Course : Computer programming (Basic Micro, COBOL, Advance Basic)
School : LORMA College San Fernando La Union
Date Graduated : 1986
Course : Secondary Level (High school)
School : LA Union National High School
Course : Primary
School : Christ The King College (Primary)
-END-
References:
Gordon Williams – PETROFAC CENDOL FPSO project HUC Manager
Glyn Howard – SSPC CSU Manager (Gumusut Kakap Semi-FPS project)
Wong Teck-Kiing – Senior Electrical Engineer Operations Malikai Project Sabah Shell Petroleum Company

jragojo CV

More Related Content

What's hot

Viewers also liked

Similar to jragojo CV

jragojo CV