The document is a cover letter and resume submitted by Abdul Mujiono for an electrician position. The cover letter outlines Mujiono's qualifications and experience working as an electrician on offshore oil rigs and pipelines projects in Indonesia and other countries over the past 20 years. The resume provides further details on his educational background and work history, highlighting experience with electrical systems maintenance, repair and troubleshooting on various rigs and vessels.

1. Abdul Mujiono
Address : Jl. Pialing II, Balikpapan – East Kalimantan 75261
Hand Phone : +62 812 5667 6 558
E-Mail : abdul.mujiono@gmail.com
Balikpapan, 2015
To :
Personal Manager / HRD
Dear Sir / Madam ,
I’m Electrician and I expert with HVAC system, AHU system, Refrigeration Provision System, PLC system,
Service and repair Gen-set (caterpillar, Hyundai, Denyo, Warsila, Mitsubishi, and Cummins), Maintenance and
repaired switchboard and switchgear, SCADA system, Analyzed faulty Motor with Soft Starter, Star-Delta
system or using with SCR system, Galley and Laundry Equipment, Elevator, Transcar and others, Maintain the
sensor on the generator set, actuator, float sensor, heater sensor and others. Repair and troubleshoot with
winches and Tensioner systems. I always was working with mix crews from other countries. Even sometime
assist mechanic to make solid team for finishing the job. I would like to apply for the vacant position as
Electrician in your company. And here is what I can offer you in return.
I am 42 years old, a good communicator and adaptive to any work situation condition.
I am extremely enthusiastic and willing to work hard, as capable of working under pressure.
I am standby now. I am familiar with computer program such MS, MS Excel, MS Word and E-Mail.
I am well trained, neat, accurate, responsible, and painstaking in all my duties in my job. That I am tactful and
courteous, resourceful, loyal, and of pleasing personality.
Thank you for you kindness attention. I hope my application would be notified and I will hear favorable reply
from you and I will submit all certificate as soon as possible to complete letter.
Yours sincerely,
Abdul Mujiono

2. CURRICULUM VITAE
Name : ABDUL MUJIONO
Nationality : Indonesia
Birth place & Date : Gresik , 28 August 1973
Marital status : Married
Address : Jl. PIALING II Blok K1 RT.28 RW.09 No. 36, Balikpapan-KALTIM
Religion : Moslem
Phone : +62 812 5667 6558
NPWP Number : 15.461.842.5-728.000
Passport Number : A 2720300 (Date of Expiry, 31 Aug 2017)
Seaman’s Book : E036140, date issued 04-Dec-2015, Valid until 03-Dec-2018
BST (Basic Safety Training) : Certificate Number 6211551183013415, Date Issued 22 Oct 2015, date of expiry 22 Oct 2020
Last Education & Training
1. Senior High School
2. Safety Passport / Yellow Card for working in Petronas Project
3. Supervisor first Aid Awareness Course
4. Sea Survival Course
5. Fire Awareness Course
6. Work Permit System Certificate by VICO Indonesia
7. T – BOSIET ( Tropical Basic Offshore Survival and Emergency Training ) and TRAVEL SAFETY BY BOAT by SAMSON TIARA
whit code 5502,certificate no. 11403901 OPITO certificate No. 713455020411112244 .
8. ID card MCU Result by PETRONAS (Expire 07-03-2016).
9. BOSIET by MSTS with EBS ( at Johor Bahru – Malaysia ) expire at 06-03-2016
10. High & Low Voltage Switchgear Operation Course (International Association of Drilling Contractor) .
Drilling Industry Training Scheme-DIT, IADC Certificate No. 5029532 (Singapore).
11. IFO COMMITMENT CERTIFICATE (By Equilibria & Check 6) at Singapore.
12. QHSE ESSENTIAL at Singapore.
13. Electrical OJT (By Transocean)
14. DP Familiarization OJT (By Transocean)
15. Dropped Object Awareness (By Transocean)
16. Energy Isolation (By Transocean)
17. Permit to Work (By Transocean)
18. HSE OJT (by Transocean)
Key Tasks:
Ensure that all maintenance work is performed safely, in accordance with statutory and company regulations and good engineering practice,
complete Daily Operations Report, PM Job Cards, Daily Handover Log accurately and with useful information • Liaise with the Maintenance
Supervisor regarding maintenance / repairs and planning ahead so as to maximize operational uptime and adequate stock of parts, tools and
consumables required to maintain the equipment for which my responsible • Carry out and record isolations to electrical powered equipment to
be worked on by my self and others under supervision in accordance with the requirements of the Permit to Work System • Compiling a concise
hand-over log, (End of Trip Report) for my relief at crew change, and forwarding a copy to the Maintenance Supervisor .
Work Experience
Company : PT. SAIPEM INDONESIA
Period of Service : March 17, 2015 until 01-Sept-2015
Position : Rig Electrician
Project & Location : Semi sub Rig Drilling SCARABEO 7 (Drilling for ENI Jangkrik project at Makassar strain)
Responsible on Board : Repair, Maintenance and Quick response, Perform the task based on RMS (Rig Management System).
Repair and Maintenance Gen-Set , Switchboard and Switchgear, MCCs panel and SCRs system
Repair and Maintenance Top Drive (MDDM) and Drawworks with all the system .
Repair and Maintenance Galley Equipment

3. Repair and Maintenance Thruster and all the system.
Repair, Maintenance, and analyze faulty all Motors on board, Measuring Resistances all motors based
On RMS (Rig Management System).
Performing the maintenance reporting and material management system as daily work activities,
MV/LV Motor, Starter, Protection, and Control Circuit installation, inspection, and repairerment, UPS
System, Battery & Charger s,Fire Alarm System, Lighting, and Small Power maintenance.
Maintenance Electrical winch system.
To performing the task should be prepare paper work first (Permit to Work and Energy Isolation Certificate.)
Company : PT. TRANSOCEAN
Period of Service : March 09, 2014 until January 22, 2015
Position : Rig Electrician
Project & Location : Rig Drilling (Client by INPEX) on Drill Ship Discoverer Seven Seas at Saum laki,Ambon offshore.
Rig Drilling (Client by Chevron ) on Cyber Rig Drill Ship Deepwater Asgard at Makassar Strain.
Responsible on Board : Repair, Maintenance and Quick response, Perform the task based on RMS (Rig Management System)
On Board. Familiar with SCADA and PLC system.
Repair and Maintenance HVAC, AHU system and Air Conditioning.
Repair and Maintenance Gen-Set , Switchboard and Switchgear, MCCs panel and SCRs system
Repair and Maintenance Top Drive (MDDM) and Drawworks with all the system .
Repair and Maintenance Galley Equipment
Repair and Maintenance Thruster and all the system.
Repair, Maintenance, and analyze faulty all Motors on board, Measuring Resistances all motors based
On RMS (Rig Management System).
Performing the maintenance reporting and material management system as daily work activities,
MV/LV Motor, Starter, Protection, and Control Circuit installation, inspection, and repairmen, UPS
System, Battery & Charger s, HVAC ,Fire Alarm System, Lighting, and Small Power maintenance.
To performing the task should be prepare paper work first (Permit to Work and Energy Isolation Certificate.)
 Company : Target Energy Company ( TECo ), (M) Sdn. Bhd
 Period of Service : July ,2011 up to November ,2013
 Position : Electrician
 Project & Location : PCSB Pipeline Replacement Projects on PLB. Mas Mulia ( Malaysian Flag )
 Responsible on board : Maintenance, Repair and quick response for troubleshooting all Equipment on board.
As Winch system (by AMCON)-Tensioner system (by SAS)-Fire Alarm system-AHU system-
Chiller/Freezer system-synchronize the Main generator with capacity 1820 KW
By CAT.All on board equipment used with electrical source,like ballasting barge-
Water Maker unit-Main Compresor,Padestal Crane, Crawler crane and others.
Repair and maintenance the Conveyor system,Elevator,Transcar and line up unit.
Repair and maintenance the AHU system for Air Cond.
Repair maintenance the Starter Panel all Electric motor.
Repair and Maintain the Galley Equipment.
 Company : PT. TRIDIANTARA ALVINDO
 Period of Service : July 20,2010 up to June 21,2011
 Position : Rig Electrician
 Project & Location : Rig Work over CBM (Coal Beat Methane) at Mutiara VICO-East Kalimantan
 Responsible on Field : Repair and quick response for troubleshooting all Equipment on field.
As Shale shaker unit-Split Air Cond-Heavy Vehicles-Forklift-Portable Rig Vehicles
(Connect-Disconnect if Rig move to other place)-Welding Machine (Miller 500 Amps)
Agitator-Accumulator and Portable Accommodation (Container Modified).
 Company : PT. KALIRAYA SARI
 Period of Service : October 28,2008 up to May 17, 2010
 Position : Electrician
 Project & Location : Barge Pipeline Well Connections at Tambora – Tunu ( Package#2 )
TOTAL E&P Indonesie – East Kalimantan on Crane Barge.
 Responsible : Repair and quick response for troubleshooting all Equipment (Some time Working on
the Crane barge and some time working at yard). Maintenance an Equipment Portable
Welding machine 85 units (Miller 600 Amps)-30 Units Welding Transformer (Miller
600 Amp).
And also Maintenance the Heavy vehicles as 12 Unit Crawler Crane-2 Unit Dump Truck-1 Unit
Tower Crane - Grader-forklift and others.
Repair and Maintenance portable Generator set by Caterpillar and Denyo . (30kVA to 600kVA)-
27 units.

4.  Company : PT. PUNJ LLOYD
 Period of Service : November 21, 2007 up to July 05, 2008
 Position : Electrician
 Project & Location : Barge Pipeline Offshore Heera Redevelopment Project Gas & ONGC in Uran
Trombay – Indian
 Responsible on Board : Repair and quick response for troubleshooting all Equipment on field
Maintenance, Repair and quick respons for troubleshooting all Equipment on board.
As Winch system (to operate with Electrical sytem but the Power by Engine)-Tensoner
System(by Remacut)-Central Unit Air conditioner-Chiller/Freezer system-Synchronize
Main generator (only 2 unit) and others.
 Company : PT. SETIA GUNA
 Period of Service : November 2002 up to October 2004
 Position : Electrician
 Project & Location : Maintenance at Total Indonesie for Handil Base,CPU,NPU,CPA
 Responsible : Repair and quick response for troubleshooting for Split Air conditioner-
Central unit Air conditioner-Fire alarm system and others (just for GTS Platform base)
Installation Instrument cable on Platform/GTS and connection instrument cable and
And installation Grounding cable system.
 Company : PT. SAMUDERA ADIPERMAI
 Period of Service : November 2004 up to July 2007
 Position : Electrician
 Project & Location : Maintenance at Total Indonesie for Handil Base,CPU,NPU,CPA
 Responsible : Repair and quick response for troubleshooting for Split Air conditioner-
Central unit Air conditioner-Fire alarm system and others (just for GTS Platform base)
Installation Instrument cable on Platform/GTS and connection instrument cable and
And installation Grounding system cable.
 Company : PT. KOMARITIM
 Period of Service : April 1998 up to August 2002
 Position :Electrician
 Project & Location : CB. Annete ( Crew Barge )
 Responsible on board : Maintenance, Repair and quick response for troubleshooting all Equipment on board.
As Winch system-Tensoner system -Fire Alarm system-AHU system-Chiller/Freezer
system-synchronize the Main generator ( 3 Unit Generator by CAT)
Pedestal Crane and others equipment.
Rewinding electric motor for 110V/220V/380/460V
 Company : PT. GUNANUSA UTAMA FABRICATORS
 Period of Service : June 15, 1995 upto December, 1997
 Position :Electrician
 Project & Location : TOTAL INONESIE-Tambora Tunu Project EPSC-1
 Responsible : Maintenance at workshop