JOINT SEALING
•
0 likes•563 views
The document describes the treatment of an expansion joint at Block 115, Building Pakistan Air Force PAF Academy Risalpur. The treatment involved removing a hump and existing sealant, repairing loose concrete and applying new sealant and waterproofing coating to the joint. Photos document the removal and repair work, application of sealant and waterproofing materials, and final leveling and water testing of the treated expansion joint.
Report
Share
Report
Share
Download to read offline
Recommended
Methodology for Prevention and Repair of Cracks in Building
Cracks in building are a common occurrence. It affects the stability and appearance of buildings. So, it is important to understand the cause of cracks and the effective measures should be taken for prevention. Though cracks in concrete cannot be prevented entirely but they can be prevented by using proper material and technique of construction and considering criteria. Sometimes water penetrates through cracks in building and cause severe damage to building. There are many reason of occurrence of cracks like moisture, thermal movement, elastic deformation, chemical reaction, foundation movement, vegetation and earthquake. We all dream of a house structurally safe and aesthetically beautiful but it is not so easy. So, timely identification of such cracks and adopting preventive measures is essential. In this paper, we will discuss about the methodology for prevention and repair of cracks in building. This research paper also gives information about result of Rebound Hammer Test and Ultrasonic Pulse Velocity Test for determining strength of concrete. Because strength of concrete is also an influencing factor for repairing cracks in building. So, we can say if crack repair is assumed to be building of structure then this paper can be assumed as foundation of it.
Citation: Dimpy B. Patel, Bhagwan Mahavir College Of Engineering And Technology; Shyam Doshi ,Bhagwan Mahavir College Of Engineering And Technology; Kevina B. Patel ,Bhagwan Mahavir College Of Engineering And Technology; Kajal B. Patel ,Bhagwan Mahavir College Of Engineering And Technology; Pinal D. Mavani ,Bhagwan Mahavir College Of Engineering And Technology. "Methodology for Prevention and Repair of Cracks in Building." Global Research and Development Journal For Engineering 33 2018: 52 - 58.
Basement Waterproofing
As a homeowner, you can be proactive or reactive in waterproofing your basement. If you are proactive, you take preventative measures to protect your home. If you are reactive, you wait until your home has a problem before coming up with a solution. This basement waterproofing article will go over proactive and reactive measures to waterproofing your basement.
The investigation of cracks and repair techniques
The document discusses investigating cracks in buildings and repair techniques. It outlines principles of investigation such as discussing the issue with owners, visiting the site, understanding the cause of cracks, monitoring crack movement, and creating a report. Cracks are classified by width and can be structural or non-structural. Common areas for cracks are walls, beams and columns. Causes include thermal movement, chemical reactions, excessive water, cement quantity, and vegetation. Repair techniques include epoxy injection, gravity filling, grouting, stitching, dry packing, polymer impregnation, and underpinning.
Difference between damp &water proofing
This document discusses damp proofing and water proofing systems for buildings. It defines dampness as unwanted moisture in a building's structure from either outside intrusion or internal condensation. Dampness can cause unhygienic conditions and damage building materials and structures over time. Damp proofing controls moisture vapor from the soil but does not stop liquid water, while water proofing creates an effective barrier against water in all forms, including vapor, and is therefore a more complete solution.
Dampness
This document discusses causes and remedies for dampness in buildings. It identifies several common sources of dampness such as rising damp from the soil, rain penetrating walls, and defects in construction. Dampness can cause issues like wood rot, metal corrosion, plaster peeling, and unhealthy indoor air quality. The document recommends constructing on well-draining sites, using water-resistant building materials, installing damp-proof courses, and treating wall surfaces to prevent moisture penetration. Special techniques include thick walls, hollow brick construction, and basement gravel layers to block damp rising from the soil.
Damp proof course
damp proof course
damp proof paint
damp proofing products
damp proofing method
damp proof course membrane
damp proof course materials
damp proof membrane construction methods
concrete damp proofing products
damp proofing material
damp proof membrane
Causes and prevention of cracks in buildings
This document discusses cracks in buildings, including their causes and prevention. It begins by defining cracks and noting the importance of understanding crack causes and remedies. Structural cracks arise from design or loading issues, while non-structural cracks are due to factors like moisture, temperature changes, or chemical reactions. Common causes of cracks include structural deficiencies, temperature/shrinkage effects, poor workmanship, and settlement. The document outlines various crack types and investigation methods. It then discusses prevention techniques before concluding that cracks should be avoided in important buildings due to effects on aesthetics and leaks.
Water leakage problem
Water leakage causes damage to structures and its contents Reinforcement corrosion , delamination, accelerated aging and increased maintenance costs are all serious concerns
Application design requirement specification for water demand , and water seepage study and investigation to locate the source of the seepage will reduce future damage to the structure and reduce maintenance costs. There are many reasons for water
leakage in buildings, some cases are caused by defective water pipes, sanitary fittings or drainage pipes or rain water leakage from roof and walls . Water leakage may come from dilapidated pipes in adjacent flats or even from inside the same flat. It may also be due to water seeping through common areas, such as the roof or external walls due to poor workmanship or inadequate design.
If water leakage is found in roof or walls or water supply or sewerage pipes and fitting and fixtures a proper investigation of the cause needs to be carried out
Recommended
Methodology for Prevention and Repair of Cracks in Building
Cracks in building are a common occurrence. It affects the stability and appearance of buildings. So, it is important to understand the cause of cracks and the effective measures should be taken for prevention. Though cracks in concrete cannot be prevented entirely but they can be prevented by using proper material and technique of construction and considering criteria. Sometimes water penetrates through cracks in building and cause severe damage to building. There are many reason of occurrence of cracks like moisture, thermal movement, elastic deformation, chemical reaction, foundation movement, vegetation and earthquake. We all dream of a house structurally safe and aesthetically beautiful but it is not so easy. So, timely identification of such cracks and adopting preventive measures is essential. In this paper, we will discuss about the methodology for prevention and repair of cracks in building. This research paper also gives information about result of Rebound Hammer Test and Ultrasonic Pulse Velocity Test for determining strength of concrete. Because strength of concrete is also an influencing factor for repairing cracks in building. So, we can say if crack repair is assumed to be building of structure then this paper can be assumed as foundation of it.
Citation: Dimpy B. Patel, Bhagwan Mahavir College Of Engineering And Technology; Shyam Doshi ,Bhagwan Mahavir College Of Engineering And Technology; Kevina B. Patel ,Bhagwan Mahavir College Of Engineering And Technology; Kajal B. Patel ,Bhagwan Mahavir College Of Engineering And Technology; Pinal D. Mavani ,Bhagwan Mahavir College Of Engineering And Technology. "Methodology for Prevention and Repair of Cracks in Building." Global Research and Development Journal For Engineering 33 2018: 52 - 58.
Basement Waterproofing
As a homeowner, you can be proactive or reactive in waterproofing your basement. If you are proactive, you take preventative measures to protect your home. If you are reactive, you wait until your home has a problem before coming up with a solution. This basement waterproofing article will go over proactive and reactive measures to waterproofing your basement.
The investigation of cracks and repair techniques
The document discusses investigating cracks in buildings and repair techniques. It outlines principles of investigation such as discussing the issue with owners, visiting the site, understanding the cause of cracks, monitoring crack movement, and creating a report. Cracks are classified by width and can be structural or non-structural. Common areas for cracks are walls, beams and columns. Causes include thermal movement, chemical reactions, excessive water, cement quantity, and vegetation. Repair techniques include epoxy injection, gravity filling, grouting, stitching, dry packing, polymer impregnation, and underpinning.
Difference between damp &water proofing
This document discusses damp proofing and water proofing systems for buildings. It defines dampness as unwanted moisture in a building's structure from either outside intrusion or internal condensation. Dampness can cause unhygienic conditions and damage building materials and structures over time. Damp proofing controls moisture vapor from the soil but does not stop liquid water, while water proofing creates an effective barrier against water in all forms, including vapor, and is therefore a more complete solution.
Dampness
This document discusses causes and remedies for dampness in buildings. It identifies several common sources of dampness such as rising damp from the soil, rain penetrating walls, and defects in construction. Dampness can cause issues like wood rot, metal corrosion, plaster peeling, and unhealthy indoor air quality. The document recommends constructing on well-draining sites, using water-resistant building materials, installing damp-proof courses, and treating wall surfaces to prevent moisture penetration. Special techniques include thick walls, hollow brick construction, and basement gravel layers to block damp rising from the soil.
Damp proof course
damp proof course
damp proof paint
damp proofing products
damp proofing method
damp proof course membrane
damp proof course materials
damp proof membrane construction methods
concrete damp proofing products
damp proofing material
damp proof membrane
Causes and prevention of cracks in buildings
This document discusses cracks in buildings, including their causes and prevention. It begins by defining cracks and noting the importance of understanding crack causes and remedies. Structural cracks arise from design or loading issues, while non-structural cracks are due to factors like moisture, temperature changes, or chemical reactions. Common causes of cracks include structural deficiencies, temperature/shrinkage effects, poor workmanship, and settlement. The document outlines various crack types and investigation methods. It then discusses prevention techniques before concluding that cracks should be avoided in important buildings due to effects on aesthetics and leaks.
Water leakage problem
Water leakage causes damage to structures and its contents Reinforcement corrosion , delamination, accelerated aging and increased maintenance costs are all serious concerns
Application design requirement specification for water demand , and water seepage study and investigation to locate the source of the seepage will reduce future damage to the structure and reduce maintenance costs. There are many reasons for water
leakage in buildings, some cases are caused by defective water pipes, sanitary fittings or drainage pipes or rain water leakage from roof and walls . Water leakage may come from dilapidated pipes in adjacent flats or even from inside the same flat. It may also be due to water seeping through common areas, such as the roof or external walls due to poor workmanship or inadequate design.
If water leakage is found in roof or walls or water supply or sewerage pipes and fitting and fixtures a proper investigation of the cause needs to be carried out
dampness in structure by umar khan
The document discusses dampness in buildings, including its definition, types, causes, effects, and methods of damp proofing. It defines dampness as the penetration of moisture inside a building and identifies three main types: rising damp, falling damp, and condensation damp. Common causes include rain penetration, soil drainage issues, and defective construction. Effects include damage to building materials, corrosion, and unhealthy conditions. Methods of damp proofing include using damp-resistant materials like bitumen and plastic sheeting in foundations, floors, and walls.
Dampness in building
Dampness in building by Engr, Naveed Ali
lecturer in CECOS university peshawar.
Dampness and its prevevtion etc.
Applying Crystalline Water Proofing Solution
The document describes a crystalline waterproofing system that can seal cracks and gaps in concrete structures to prevent water penetration. A cementitious crystalline waterproofing compound is made into a thin slurry and applied to joints and gaps between tiles. When water is added, the chemical enters the pores and crystallizes to fill all gaps. This integrated waterproofing system protects against leaks and prevents water damage without needing additional surface coatings. It can be used for structures like swimming pools, basements, and concrete walls.
Waterproofing Challenges and Suggested Remedial measures for High Rise Buildi...
Leakage can occur in both old and new constructions. Mostly it has been witnessed in old constructions. This indeed is a major problem faced by the buildings. As it is affecting both exterior and interior look of buildings and also causing damage to structural members. It also harms paint of the wall. The problem includes survey of not only leakage, but also dampness and seepage in the residential blocks. This study provide a better and more scientifically based understanding of the role of waterproofing materials to assist the prevention of moisture from penetrating sub-grade walls and slabs. The significance of the research topic is to provide a review of the development of waterproofing materials in implementing waterproofing system in building industry with some case study reference in the current market in India.
Slide show does stucco leak
1) Tests show that stucco does not leak liquid water, as water cannot pass through intact stucco.
2) Leaks in stucco buildings are usually caused by other sources like roofs, windows, doors, penetrations through walls, or gaps around these openings that allow water to enter.
3) Large cracks in stucco can potentially allow water to pass, but normal cracking seen in stucco does not result in leaks.
Structureal Cracks
This document discusses the prevention of cracks in structures. It defines different types of cracks such as structural cracks and non-structural cracks. Some common causes of cracks are elastic deformation, thermal movement, chemical reactions, shrinkage, foundation movement, and earthquakes. The document describes several techniques to repair cracks, such as epoxy injection, routing and sealing, stitching, drilling and plugging, and gravity filling. It also provides designs and solutions to prevent cracking in structures due to vibrations, soil settlement, earthquakes, improper curing of slabs, cracks in brick walls, and cracks above windows and doors.
Damp proofing
This document discusses various types of dampness that can affect buildings, including rising damp, penetrating damp, and condensation. It lists common causes like rain penetration, ground moisture rise, and defective construction. Signs of dampness include discolored wall patches, tide mark staining, salt deposits, and localized mold growth. Dampness can cause corrosion, cracking, adhesion issues, and deterioration over time. Prevention methods include proper design, construction techniques like damp proofing, and treatment of existing issues through drainage improvements and insertion of barriers.
Basement Waterproofing for Homeowners
An outline of common foundation problems known to affect basement homes and ways to fix them with basement waterproofing. www.olshanfoundation.com for more information.
Leakage in external walls of the buildings.
It gives an idea about how to control and detect the actual cracks in external and internal walls of the buildings.
basement waterproofing
Hiring an experienced basement waterproofing firm is important to effectively waterproof a basement. Professionals can evaluate the home to identify vulnerable leak points and recommend the best waterproofing methods, such as exterior excavation, interior drain installation, or negative side sealant. The most effective waterproofing technique is typically an exterior foundation drain system that diverts water away from basement walls. Homeowners should also consider regular inspections and maintenance to prevent future water issues. Finding the right contractor is key to resolving basement water problems effectively.
Rising damp
Rising damp occurs when masonry walls absorb water from the ground due to capillary action. It can rise over 1m depending on the wall material and ground conditions. Diagnosing the cause is important - it may be rising damp, rain penetration, condensation, or leaks. Treatment involves improving drainage, replacing damaged damp-proof courses, and allowing walls to dry before replastering. New methods using chemical injection or nanotechnology are being researched to more effectively treat rising damp.
Basement waterproofing
This article doesn't cite any references or sources. Please facilitate improve this text by adding citations to reliable sources. Unsourced material is also challenged and removed.
Basement Waterproofing refers to techniques wont to stop water from getting into the basement of a house or alternative building. Effective below ground waterproofing can embody each evacuation and sealers.
Dampness in buildings
This document discusses various causes and types of dampness that can occur in buildings. It describes rising damp, which occurs when water rises up walls through capillary action from the soil. To prevent this, damp-proof courses (DPCs) made of impervious materials like slate or bitumen felt are installed. Deterioration or bridging of the DPC can lead to dampness. Hygroscopic salts in rising damp water can also cause issues by continuing to attract moisture after repairs. The document also discusses penetrating dampness from external water entering walls, condensation dampness caused by high humidity and ventilation issues, and bridging of cavity walls. Treatments include replacing or injecting new DPCs, drainage improvements,
Waterproofing in structure
The document discusses various aspects of waterproofing systems. It explains that conventional waterproofing involves applying membrane barriers to prevent water passage. It also notes that quality waterproofing is essential to preserve building envelope water-tightness, as below-grade areas and plaza decks experience hydrostatic pressure. The document then provides definitions for waterproofing versus damp-proofing and discusses different waterproofing materials and methods, including sheet membranes, liquid systems, bentonite, metal oxide, and cementitious options. It emphasizes that substrate preparation and multiple protective layers are important for effective waterproofing.
WATER LEAKEGE REMEDIES AND PRECAUTIONS IN RCC STRUCTURE
The document discusses various types of water leakage issues that can occur in reinforced concrete (RCC) structures and provides remedies and precautions. It covers types of terrace construction like brick bat coba and Indian patent stones that are used. It also discusses how to detect and repair slab leaks, leaks from terraces, roof leaks, and water damage to ceilings. Various supplies and tools needed for repairs are listed. Waterproofing systems using chemicals, coatings, and membranes are introduced. Causes of leakage like defects in construction, maintenance, and design are explained along with preventive measures.
Bottom erosion reasons of glass furnace
Zircon brick can especially be used as superstructure bricks of flame space and bottom bricks of glass furnace in glass industry.Zhengzhou Sunrise Refractory Co., Ltd can provide zircon brick with good quality which have passed the ISO international certified. With reliable quality, competitive price and prompt delivery, Sunrise has established long-term business and cooperation relationship with many customers in different countries and regions. For any further information, Contact us, Sunrise are sincerely looking forward to establishing a long-term mutually beneficial relationship with you.
Water Proofing techniques
Remedial Technologies Australia (Remtech) is an Australian owned, managed and operated provider of remedial and civil construction services. With operations across Australia, Remtech is proud of its heritage, knowledge and capabilities.
Waterproofing methods & materials used in construction
Waterproofing is important for construction to prevent water damage. It involves making structures water resistant through various methods and materials. Common waterproofing methods include cementitious waterproofing for interior areas, liquid waterproofing membranes for flexible coverage, and bituminous membranes and coatings for roofs and foundations. Proper waterproofing protects buildings from leakage, deterioration and mold, while also preventing health issues and unnecessary repair costs. Issues like cracks, poor installation, and lack of maintenance can compromise waterproofing and should be addressed.
causes & prevention of cracks
The document discusses cracks in buildings, their causes and prevention. It classifies cracks as structural or non-structural and by width, direction and appearance. Non-structural cracks are caused by thermal variation, chemical reactions, moisture movement, foundation issues and manufacturing defects. Thermal variation results from temperature changes causing expansion and contraction. Moisture movement from wetting and drying leads to reversible and irreversible movement. After construction, structural cracks can be repaired through epoxy injection, polyurethane injection or stitching cracks. The seminar provides information on identifying crack causes and selecting suitable repair techniques.
What you need to know about basement waterproofing
ExpressRooter Plumbing is a trusted plumber serving the Greater Toronto Area in areas such as plumbing repair, sink clogs and basement waterproofing services. Call us today!
Tauranga
This document provides details about a two-day itinerary for visiting Tauranga, New Zealand. Day one includes breakfast at McDonald's, whale and dolphin watching, visiting Kiwi 360 for a tour and shopping, kayaking at night to see glow worms, and dinner at an Italian restaurant. Day two consists of breakfast at McDonald's, activities like a 4WD tour and jet boating with Spring Loaded, visiting Whale Island for guided walks, dinner at a Thai restaurant, and a movie. Recommendations are provided for top activities like whale watching, the Kiwi 360 experience, and the Spring Loaded tours that combine adventure and nature.
More Related Content
What's hot
dampness in structure by umar khan
The document discusses dampness in buildings, including its definition, types, causes, effects, and methods of damp proofing. It defines dampness as the penetration of moisture inside a building and identifies three main types: rising damp, falling damp, and condensation damp. Common causes include rain penetration, soil drainage issues, and defective construction. Effects include damage to building materials, corrosion, and unhealthy conditions. Methods of damp proofing include using damp-resistant materials like bitumen and plastic sheeting in foundations, floors, and walls.
Dampness in building
Dampness in building by Engr, Naveed Ali
lecturer in CECOS university peshawar.
Dampness and its prevevtion etc.
Applying Crystalline Water Proofing Solution
The document describes a crystalline waterproofing system that can seal cracks and gaps in concrete structures to prevent water penetration. A cementitious crystalline waterproofing compound is made into a thin slurry and applied to joints and gaps between tiles. When water is added, the chemical enters the pores and crystallizes to fill all gaps. This integrated waterproofing system protects against leaks and prevents water damage without needing additional surface coatings. It can be used for structures like swimming pools, basements, and concrete walls.
Waterproofing Challenges and Suggested Remedial measures for High Rise Buildi...
Leakage can occur in both old and new constructions. Mostly it has been witnessed in old constructions. This indeed is a major problem faced by the buildings. As it is affecting both exterior and interior look of buildings and also causing damage to structural members. It also harms paint of the wall. The problem includes survey of not only leakage, but also dampness and seepage in the residential blocks. This study provide a better and more scientifically based understanding of the role of waterproofing materials to assist the prevention of moisture from penetrating sub-grade walls and slabs. The significance of the research topic is to provide a review of the development of waterproofing materials in implementing waterproofing system in building industry with some case study reference in the current market in India.
Slide show does stucco leak
1) Tests show that stucco does not leak liquid water, as water cannot pass through intact stucco.
2) Leaks in stucco buildings are usually caused by other sources like roofs, windows, doors, penetrations through walls, or gaps around these openings that allow water to enter.
3) Large cracks in stucco can potentially allow water to pass, but normal cracking seen in stucco does not result in leaks.
Structureal Cracks
This document discusses the prevention of cracks in structures. It defines different types of cracks such as structural cracks and non-structural cracks. Some common causes of cracks are elastic deformation, thermal movement, chemical reactions, shrinkage, foundation movement, and earthquakes. The document describes several techniques to repair cracks, such as epoxy injection, routing and sealing, stitching, drilling and plugging, and gravity filling. It also provides designs and solutions to prevent cracking in structures due to vibrations, soil settlement, earthquakes, improper curing of slabs, cracks in brick walls, and cracks above windows and doors.
Damp proofing
This document discusses various types of dampness that can affect buildings, including rising damp, penetrating damp, and condensation. It lists common causes like rain penetration, ground moisture rise, and defective construction. Signs of dampness include discolored wall patches, tide mark staining, salt deposits, and localized mold growth. Dampness can cause corrosion, cracking, adhesion issues, and deterioration over time. Prevention methods include proper design, construction techniques like damp proofing, and treatment of existing issues through drainage improvements and insertion of barriers.
Basement Waterproofing for Homeowners
An outline of common foundation problems known to affect basement homes and ways to fix them with basement waterproofing. www.olshanfoundation.com for more information.
Leakage in external walls of the buildings.
It gives an idea about how to control and detect the actual cracks in external and internal walls of the buildings.
basement waterproofing
Hiring an experienced basement waterproofing firm is important to effectively waterproof a basement. Professionals can evaluate the home to identify vulnerable leak points and recommend the best waterproofing methods, such as exterior excavation, interior drain installation, or negative side sealant. The most effective waterproofing technique is typically an exterior foundation drain system that diverts water away from basement walls. Homeowners should also consider regular inspections and maintenance to prevent future water issues. Finding the right contractor is key to resolving basement water problems effectively.
Rising damp
Rising damp occurs when masonry walls absorb water from the ground due to capillary action. It can rise over 1m depending on the wall material and ground conditions. Diagnosing the cause is important - it may be rising damp, rain penetration, condensation, or leaks. Treatment involves improving drainage, replacing damaged damp-proof courses, and allowing walls to dry before replastering. New methods using chemical injection or nanotechnology are being researched to more effectively treat rising damp.
Basement waterproofing
This article doesn't cite any references or sources. Please facilitate improve this text by adding citations to reliable sources. Unsourced material is also challenged and removed.
Basement Waterproofing refers to techniques wont to stop water from getting into the basement of a house or alternative building. Effective below ground waterproofing can embody each evacuation and sealers.
Dampness in buildings
This document discusses various causes and types of dampness that can occur in buildings. It describes rising damp, which occurs when water rises up walls through capillary action from the soil. To prevent this, damp-proof courses (DPCs) made of impervious materials like slate or bitumen felt are installed. Deterioration or bridging of the DPC can lead to dampness. Hygroscopic salts in rising damp water can also cause issues by continuing to attract moisture after repairs. The document also discusses penetrating dampness from external water entering walls, condensation dampness caused by high humidity and ventilation issues, and bridging of cavity walls. Treatments include replacing or injecting new DPCs, drainage improvements,
Waterproofing in structure
The document discusses various aspects of waterproofing systems. It explains that conventional waterproofing involves applying membrane barriers to prevent water passage. It also notes that quality waterproofing is essential to preserve building envelope water-tightness, as below-grade areas and plaza decks experience hydrostatic pressure. The document then provides definitions for waterproofing versus damp-proofing and discusses different waterproofing materials and methods, including sheet membranes, liquid systems, bentonite, metal oxide, and cementitious options. It emphasizes that substrate preparation and multiple protective layers are important for effective waterproofing.
WATER LEAKEGE REMEDIES AND PRECAUTIONS IN RCC STRUCTURE
The document discusses various types of water leakage issues that can occur in reinforced concrete (RCC) structures and provides remedies and precautions. It covers types of terrace construction like brick bat coba and Indian patent stones that are used. It also discusses how to detect and repair slab leaks, leaks from terraces, roof leaks, and water damage to ceilings. Various supplies and tools needed for repairs are listed. Waterproofing systems using chemicals, coatings, and membranes are introduced. Causes of leakage like defects in construction, maintenance, and design are explained along with preventive measures.
Bottom erosion reasons of glass furnace
Zircon brick can especially be used as superstructure bricks of flame space and bottom bricks of glass furnace in glass industry.Zhengzhou Sunrise Refractory Co., Ltd can provide zircon brick with good quality which have passed the ISO international certified. With reliable quality, competitive price and prompt delivery, Sunrise has established long-term business and cooperation relationship with many customers in different countries and regions. For any further information, Contact us, Sunrise are sincerely looking forward to establishing a long-term mutually beneficial relationship with you.
Water Proofing techniques
Remedial Technologies Australia (Remtech) is an Australian owned, managed and operated provider of remedial and civil construction services. With operations across Australia, Remtech is proud of its heritage, knowledge and capabilities.
Waterproofing methods & materials used in construction
Waterproofing is important for construction to prevent water damage. It involves making structures water resistant through various methods and materials. Common waterproofing methods include cementitious waterproofing for interior areas, liquid waterproofing membranes for flexible coverage, and bituminous membranes and coatings for roofs and foundations. Proper waterproofing protects buildings from leakage, deterioration and mold, while also preventing health issues and unnecessary repair costs. Issues like cracks, poor installation, and lack of maintenance can compromise waterproofing and should be addressed.
causes & prevention of cracks
The document discusses cracks in buildings, their causes and prevention. It classifies cracks as structural or non-structural and by width, direction and appearance. Non-structural cracks are caused by thermal variation, chemical reactions, moisture movement, foundation issues and manufacturing defects. Thermal variation results from temperature changes causing expansion and contraction. Moisture movement from wetting and drying leads to reversible and irreversible movement. After construction, structural cracks can be repaired through epoxy injection, polyurethane injection or stitching cracks. The seminar provides information on identifying crack causes and selecting suitable repair techniques.
What you need to know about basement waterproofing
ExpressRooter Plumbing is a trusted plumber serving the Greater Toronto Area in areas such as plumbing repair, sink clogs and basement waterproofing services. Call us today!
What's hot (20)
Waterproofing Challenges and Suggested Remedial measures for High Rise Buildi...
Waterproofing Challenges and Suggested Remedial measures for High Rise Buildi...
WATER LEAKEGE REMEDIES AND PRECAUTIONS IN RCC STRUCTURE
WATER LEAKEGE REMEDIES AND PRECAUTIONS IN RCC STRUCTURE
Waterproofing methods & materials used in construction
Waterproofing methods & materials used in construction
What you need to know about basement waterproofing
What you need to know about basement waterproofing
Viewers also liked
Tauranga
This document provides details about a two-day itinerary for visiting Tauranga, New Zealand. Day one includes breakfast at McDonald's, whale and dolphin watching, visiting Kiwi 360 for a tour and shopping, kayaking at night to see glow worms, and dinner at an Italian restaurant. Day two consists of breakfast at McDonald's, activities like a 4WD tour and jet boating with Spring Loaded, visiting Whale Island for guided walks, dinner at a Thai restaurant, and a movie. Recommendations are provided for top activities like whale watching, the Kiwi 360 experience, and the Spring Loaded tours that combine adventure and nature.
Management performance evaluations
This document discusses different methods for conducting performance reviews and raises several criticisms. It summarizes the key methods as employee ratings, management by objectives (MBO), and 360 feedback. It argues that employee ratings are highly subjective and can be manipulated. MBOs risk employees only focusing on a few measurable goals rather than overall performance. 360 feedback relies too much on peer opinions and politics rather than objective evaluation by management. The document advocates for clear expectations set by leadership and direct, honest feedback from managers on an employee's performance and results.
Critical path
Critical Path Analysis (CPA) and Program Evaluation and Review Technique (PERT) are tools used to schedule and manage complex projects. CPA involves listing all project activities, their durations, and dependencies to identify the critical path of sequential activities that determine the shortest project duration. PERT is similar but takes a more conservative approach by analyzing best, worst, and most likely durations for each activity. Both help project managers identify schedules, resource needs, risks, and ways to accelerate projects if needed.
Vietnam seminar 3 - Theravada buddhism
The document summarizes a seminar trip to the Mekong Delta in Vietnam. It describes visits to a southern medicine dispensary, a Khmer pagoda under construction, and enjoying local cuisine for dinner. It then discusses traveling to Soc Trang and visiting Kleang Pagoda, including seeing stupas, Buddha statues, wood pillars, and windows decorated with dragons. The trip concluded with group discussions on research topics back in Can Tho city.
Beverages Plus Pepsicola
Self leveling epoxy flooring is a type of floor coating that can be poured or rolled onto concrete floors and self levels to create a smooth, durable surface. It cures to form a hard, chemical and impact resistant finish suitable for commercial spaces such as warehouses, garages, and shops. Self leveling epoxy comes in various colors and gloss levels to suit different aesthetic and functional needs.
Mac arthur high school star chart
This document provides information about MacArthur High School's STaR Chart, which is used to assess and plan their technology program. The STaR Chart evaluates the school across four key areas of technology use and identifies their classification based on point totals in each area. It also examines trends over the past three years and identifies focus areas for teaching and learning, educator preparation, administration/support, and infrastructure for technology. The goal of the STaR Chart is to help drive teaching and learning and move the school's education towards an effective future technology integration.
Walker SGP
The document discusses different perspectives on the meaning of life, including personal, scientific, religious, philosophical, and how to apply meaning. It covers topics like finding positives, curiosity, evolution, faith, karma, self-actualization, and doing good works. The author considers different views and concludes that making the most of life through good works is meaningful.
Ejes para elaborar un plan de seguridad presentación final
El documento propone ideas para un nuevo plan de seguridad pública y defensa social para la provincia de Salta basado en la modernización conceptual, la participación activa de la comunidad y la descentralización y autonomía. Se sugiere romper con el modelo clásico de seguridad, invertir más en prevención que en represión, y dar más poder a la comunidad y gobiernos municipales en materia de seguridad a través de nuevas estructuras como consejos y fuerzas de seguridad municipales.
AKSON PHARMA MIRPUR AJK
Self leveling epoxy flooring provides a smooth, durable, and chemical resistant floor finish. It can be applied to both new and existing concrete floors. The epoxy forms a seamless, high-gloss surface ideal for commercial settings like warehouses, garages, and manufacturing facilities.
Menus PARA LA MAQUETACION DE UNA PAGINA WEB
Este documento proporciona instrucciones paso a paso para maquetar una página web empresarial en Photoshop CS4. Explica cómo diseñar los elementos principales como el header, menú, logo y footer siguiendo cinco pasos para cada uno. También incluye instrucciones para crear la página principal con decoraciones y formas personalizadas. Finaliza reconociendo a la diseñadora y director del proyecto.
Pimp My Community
This document summarizes tips for improving an open source community. It recommends maintaining good relationships with maintainers, using social tools to engage the community, making it easy for new contributors to get involved, documenting processes and responsibilities, focusing on the first 2-3 months of a new contributor's experience, and ensuring the project's purpose and technical side are clear. It also provides a checklist for evaluating a community's visibility, contributions, relationships, and technical organization.
Balchik maria's palace_and_botanical_garden
The document discusses the benefits of exercise for mental health. It states that regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help boost feelings of calmness and happiness.
Technology application ppt
The document discusses a Star Chart tool used for technology planning and evaluation. The Star Chart provides data on a school's level of technology progress, student and teacher technology proficiencies, and helps update technology plans. It measures four key areas - Teaching and Learning, Educator Preparation and Development, Leadership and Infrastructure - and classifies schools as Developing, Advanced or Target Technology.
Paperclip
The film 'PAPERCLIP' follows Beatriz and Caleb, two teenagers who feel stuck in mundane lives and seek liberation, companionship, and self-discovery. They separately embark on journeys of discovery, constantly crossing paths but never meeting. Their near-meetings are frustrated by small coincidences. In the climax, they see each other across a meadow but the scene abruptly ends, leaving the audience unsure if their meeting was real. The film explores themes of dreams versus reality and 'what could have been.' Paperclips symbolize the connection between the characters and the small things that prevent their meeting.
The Ultimate Guide To Your 20s Ebook
This document provides a summary of life lessons and advice for people in their 20s. It includes tips on creating a life plan, setting goals, job hunting, career development, and personal finances. For job hunting, it offers advice on resumes, cover letters, networking, and interviewing. For personal finances, it discusses budgeting, credit card debt, and ways to make extra money. The overall document aims to help people in their 20s navigate important life decisions and challenges.
Viewers also liked (20)
Ejes para elaborar un plan de seguridad presentación final
Ejes para elaborar un plan de seguridad presentación final
Similar to JOINT SEALING
Adarsh P1.pptx
This document summarizes a seminar presentation on under water concreting (UWC). It discusses the requirements and constituents of UWC, methods for placing concrete under water, and causes of concrete deterioration underwater. Specifically, it discusses that tremie and pumping are better placement methods as they allow concrete to be placed without segregation. It also notes that viscosity modifying admixtures can improve the cohesiveness of underwater concrete and reduce washout properties. The purpose of VMA is to replace fines and make fresh concrete more stable.
Krystol Magazine 17.1
The document discusses a risky repair project for a South African mine. The mine's slag granulation cooling tower had developed cracks over 4000 square meters, leaking extremely hot water. Repairs had to be done while the 6-meter deep reservoir remained full of near-boiling water. The only successful test was using Kryton's Krystol Crack Repair System and surface-applied waterproofing. The repair team used Kryton products to stop water flow through cracks and fully waterproof the reservoir while it remained in use.
3 damp proofing
Damp is generally defined as unwanted water or moisture.
Dampness is the access and penetration of moisture content into building through its wall, floor, roof etc.
The existence of dampness in buildings is one of the most damaging failures that can occur in buildings.
Every building should be damp proof.
The main idea of damp-proofing is to protect buildings against the damaging action of water and humidity that act negatively upon constructions.
Neither humans nor buildings can tolerate too little or too much of water.
Excess water in buildings is called Dampness. The root of all evil is water.
In construction, a building or structure is waterproofed with the use of membranes and coatings.
Oil-based waterproofing is generally used for roof leakage after construction and uses only on the wall like a primer.
Moisture can also affect the health of occupants typically through the potential for breeding harmful organisms.
On the other hand, moisture reduces the shrinking cracks of wood and furniture, and up to a point, is necessary to avoid respiratory discomfort.
Thus, moisture is both a necessary constituency of our built environment and a potential liability.
The issue, then, is not to eliminate moisture from our buildings, but to control it and its movements.
Foundation Repair Systems & Forensic Repairs
The document provides an overview of services offered by Arizona Ram Jack, LLC including helical and hydraulic piers for foundation repair, concrete waterproofing, mudjacking, microdoweling, and carbon fiber wrapping. Case studies are presented showing applications of the foundation repair techniques to resolve issues like settlement, heaving, and added capacity needs.
Waterproofing dublin09 1
The document discusses considerations for basement waterproofing and grades of watertightness. It explains that the intended use of the basement determines the appropriate grade and level of waterproofing. Higher grades, like grade 4, require measures like a ventilated cavity to ensure a completely dry environment for uses like archives. Common ways to waterproof include reinforced concrete design, waterproofing membranes, and cavity drain systems. Quality of workmanship is important for successful waterproofing.
Cip
The document discusses various concrete surface defects including dusting, scaling, and crazing. It provides explanations of what causes each defect, how to prevent it, and how to repair surfaces affected by the defect. For dusting, the key points are to use moderate slump concrete, not finish when bleed water is present, cure adequately, and seal surfaces. For scaling, the document recommends using air-entrained concrete, avoiding deicers for one year, and sealing surfaces. It also provides tips on how to prepare surfaces for repair.
IRJET- Roughness Coefficient of Alkali Activated Mineral based Concrete C...
This document discusses a study that tested the roughness coefficient of alkali-activated mineral-based concrete composite pipes subjected to varying slopes. Geopolymer concrete pipes were cast and tested using a new setup that measured the roughness coefficient effectively. The test apparatus consisted of a discharge tank, steel stands, a valve assembly, hydraulic jack, LVDT, depth measuring gauge, and collecting tank. PVC pipes and conventional concrete pipes were first tested to validate the accuracy of the setup. Geopolymer concrete pipes with different fiber contents were then tested at various slopes measured by the LVDT. The time taken to fill the collecting tank was used to calculate the roughness coefficient value based on the Manning's formula for determining pipe discharge.
Masonry Part 2 F 09
This document discusses various types of masonry walls, including reinforced, composite, and cavity walls. It describes anchoring and tying techniques used to join wythes of masonry and supports. Methods for adding reinforcement like grout, rebar, and post-tensioning bars are presented. The document also covers flashing, insulation, expansion/control joints, and potential issues like efflorescence and spalling.
Waterproofing and insulaton
Waterproofing is used to prevent water from entering or escaping building structures. There are internal and external waterproofing membranes. Basement waterproofing is especially important to prevent hydrostatic pressure from causing moisture issues. Common types of basement waterproofing include sealants and water drainage systems. Sealants can be exterior or interior and come in different forms like films, paints or injected solutions. Water drainage systems use perimeter drains, pipes, and sump pumps to collect and remove groundwater from the basement. Proper waterproofing requires both sealing and drainage for effective below-ground protection.
IJSRED-V2I3P90
- The document describes a casing and cementing job on Benin Basin Well 16A of Maro Oil Company.
- It discusses the casing types and cement slurries used, including additives added to modify cement properties. Lead and tail cement slurries were pumped according to design.
- Calculations were shown for determining the volumes of lead and tail cement slurries needed based on annular volumes between casing and open hole. The job was successful in isolating zones according to the well's objectives.
IJSRED-V2I3P90
- The document describes a casing and cementing job on Benin Basin Well 16A of Maro Oil Company.
- It discusses the casing types and cement slurries used, including additives added to modify cement properties. Lead and tail cement slurries were pumped according to design.
- Calculations were shown for determining the volumes of lead and tail cement slurries needed based on annular volumes between casing and open hole. The job was successful in isolating zones according to the well's objectives.
Nano-Clear Protects Concrete Block in Shower Stall
Nano-Clear Industrial coating was used to penetrate the concrete block in a state park comfort station to create an impervious barrier to water migration through the concrete block. Also, Nano-Clear was sprayed on the concrete block creating a monolithic "tough" coating on the block surface making routine clean-up of mineral deposits and soap scum much easier.
2376 robor ductile_iron_brochure5
The document discusses ductile iron pipe and fittings supplied by Robor, a South African manufacturer. It provides information about the company, which was established in 1922 and manufactures steel tube, pipe and other products. It also details the benefits of ductile iron pipe, including corrosion resistance, long life, ease of installation, and cost-effectiveness. The document provides specifications for ductile iron pipe classes, dimensions, pressure ratings and internal cement mortar lining.
ABTS 4th year pdf
Sneha Waghire's presentation document covers three topics: a groin vault, a swimming pool case study, and the Burj Khalifa high-rise building in Dubai. The document includes diagrams and photos of each structure and details their designs and construction processes. It provides information on the Chaitanya Health Club swimming pool in Pune, including its location, facilities, and the 14 steps involved in pool construction. Details are also given on the Burj Khalifa, the tallest man-made structure, including its records, design, and how it collects water from condensation.
AJN Waterproofing Q&A
AJN Waterproofing Inc. is a Canadian company that offers foundation waterproofing services using traditional craftsmanship and modern materials. The document discusses five common waterproofing methods - internal repair, crack repair, external repair, parging, and new foundation wraps. It also provides details on the company's use of Delta MS air gap membrane for waterproofing, which uses dimples and drainage systems to direct water away from foundations. The summary concludes by thanking readers for choosing AJN and noting that waterproofing adds value and peace of mind to homeowners.
special concrete and high performance concrete
GROUTING OF CONCRETE, advantage ofGrouting,Characteristics of Grouting, GUNTING OF
CONCRETE, Application of Guniting, Properties of Guniting, advantage and disadvantage of Guniting, UNDERWATER CONCRETING, Properties of underwater concrete, METHODS OF UNDERWATER CONCRETE, advantage and disadvantage of underwater concrete, HOT WEATHERING CONCRETE, precautions, COLD WEATHER CONCRETING, PUMPABLE CONCRETE, Requirements of Mix Design for Pumpable Concrete, Ready Mixed Concrete RMC, Types of Ready Mixed Concrete, advantage and disadvantage of ready mixed concrete, introduction in High performance concrete HPC, selection of materials, behaviour of fresh high performance concrete HPC , behaviour of Hardened High performance concrete HPC when to use High performance concrete HPC , application of HPC , Advantage of HPC , Limitations of HPC
soft permeable pipe
This document provides information about Crownswear's third generation soft drain hose product. It describes the hose's layered structure, materials used including high carbon steel wire and polyester fibers, and advantages over other drain pipes. The document also outlines suitable applications, installation methods, and testing properties of the drain hose.
soft permeable pipe
This document provides information about Crownswear's third generation soft drain hose product. It describes the hose's layered structure, materials used including high carbon steel wire and polyester fibers, and advantages over other drain pipes. The document also outlines suitable applications, installation methods, and testing properties of the drain hose.
The construction method for surface drainage (housing)
The document discusses surface drainage construction methods for housing. It describes various drainage technologies like corrugated drain pipes and French drains. It outlines methods to prevent water infiltration like geotextiles and cement mortar. Local authority requirements for drainage design and construction are presented. A 14-step method statement is provided for constructing a drainage system including site work, formwork installation, reinforcement, concreting, and backfilling. Proper drainage installation can help prevent water damage to residential and commercial buildings.
Our Services
IDEAL SOLUTIONS was established in 2007 to provide quality construction services. They believe small businesses can better serve customers through direct interaction. Their philosophy is to deliver high quality results through developing their people and pursuing consistent improvements. Their vision is for continued dynamic growth while exceeding customer expectations with excellent service and competitive prices. They offer a wide range of services including waterproofing, flooring systems, concrete repairs, and more to serve as a total solutions company for customers' construction and maintenance needs.
Similar to JOINT SEALING (20)
IRJET- Roughness Coefficient of Alkali Activated Mineral based Concrete C...
IRJET- Roughness Coefficient of Alkali Activated Mineral based Concrete C...
Nano-Clear Protects Concrete Block in Shower Stall
Nano-Clear Protects Concrete Block in Shower Stall
The construction method for surface drainage (housing)
The construction method for surface drainage (housing)
More from Rana Imran
Dry shake floor hardeners
This document discusses floor hardeners for protecting concrete floors. It describes dry-shake surface hardeners which are sprinkled onto fresh concrete to create an abrasion-resistant topping that is bonded to the concrete slab. Two specific hardeners are highlighted: HARDONATE METALTOP contains metallic aggregates and is very durable, while HARDONATE MINERALTOP uses quartz aggregates for a non-metallic option. Both products are recommended for use in industrial, commercial and heavy traffic applications. Application instructions are provided.
Acrylic waterproofing of cement silos line 1
The document outlines the steps for acrylic waterproofing of cement silos at Askari Cement Ltd in Nizampur. This includes dismantling the existing screed and bitumen layer, cleaning the surface, cement repairs, applying primer coats and fiber glass sheets, and finishing with applications of Mitchflex 2K and Hardoflex acrylic waterproofing products. The project is managed by Rana Imran Ahmad of Mitchell & Co.
Business profile 2016
Ideal Solutions was established in 2007 to provide construction chemical services and products based on latest techniques. It aims to save clients time, money and issues. The company's experienced teams conduct numerous application projects. Its marketing division sells construction chemicals and provides end user services. Ideal Solutions specializes in waterproofing, epoxy flooring, joint sealing and concrete repair/protection. It strives to deliver high quality results and customer service. The company takes a flexible approach to tailor solutions based on client requirements for each project.
SKID RESISTANCE
Skid resistance is the force developed when a tire that is prevented from rotating slides along the pavement surface. Loss of control through skidding can be a significant factor in many crashes, especially when the road is wet. Particular attention should be paid to the skidding resistance properties of the carriageway surface at areas where braking commonly occurs such as on the approaches to intersections, pedestrian crossings and on bends, as poor skid resistance can occur when the road surface becomes worn down and the aggregate becomes polished.
Skid Resistance Now In Pakistan
Skid resistance is the force developed when a tire that is prevented from rotating slides along the pavement surface. Loss of control through skidding can be a significant factor in many crashes, especially when the road is wet. Particular attention should be paid to the skidding resistance properties of the carriageway surface at areas where braking commonly occurs such as on the approaches to intersections, pedestrian crossings and on bends, as poor skid resistance can occur when the road surface becomes worn down and the aggregate becomes polished.
Roadex Paints
We are producing state of the art road marking and road safety materials. We are the 1st one to introduce Skid resistance materials for roads in Pakistan. We produce all materials in the technical collaboration of Adbruf UK.
EHC Brochure
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
waterproofing, H.No.1, F-7/3
This document appears to be about a photo album located at House No.1, F-7/3. The photo album was created by Imran and focuses on waterproofing as its subject matter. The album documents waterproofing through photographs taken by Imran.
Pakistan Tobacoo Company Akora Khattak
PTC Akora Khattak is a town located in Khyber Pakhtunkhwa province of Pakistan. It is the headquarters of Nowshera District and is situated along the Grand Trunk Road, approximately 45 kilometers west of the provincial capital Peshawar. The town serves as an important commercial and transportation hub in the region.
Ksb epoxy screed
We applied 5mm thick epoxy screed on the floor. it took us more than a month to complete 25000 SFT area.
Business profile 2014
IDEAL Solutions is a construction chemicals company established in 2007 that provides waterproofing, epoxy flooring, joint sealing, and concrete repair services. The company is managed by Rana Imran Ahmad Khan, who has extensive experience in the construction chemicals field. IDEAL Solutions strives for quality and customer service and has worked on projects for government entities and private companies throughout Pakistan.
Ksb it center roof
The document discusses waterproofing for a pump center roof. It focuses on ensuring the roof is properly sealed to prevent water damage to the building and equipment inside. A qualified contractor should be hired to inspect the roof, make any necessary repairs, and apply a new waterproof membrane as needed to protect the pump center long-term.
Stillman's cream plant waterproofing
Stillman's Cream Plant produces a waterproofing cream. The cream protects surfaces from water damage by forming an invisible barrier. It can be used on wood, concrete, and other materials to shield against moisture for long-lasting protection.
FDL Hattar Epoxy Flooring Project
Self leveling epoxy flooring provides a smooth, durable, and easy to clean surface for commercial spaces. The epoxy forms a chemical bond with the concrete substrate and dries to form a seamless, high-gloss finish. When installed properly, self leveling epoxy flooring offers years of protection and low maintenance needs.
2 mm self level epoxy flooring
The document provides instructions for filling epoxy mortar on joints, preparing coving, and applying penetrative and final epoxy primers and coatings with a thickness of 2mm on joints, coving, and other surfaces. The multi-step process includes preparation, application of multiple epoxy primer and coating layers, with the final step being application of a final epoxy coating at 2mm thickness.
Sloppy roof and waterproofing
This is a one sentence document containing a website URL, www.idealsolutionspk.com. The URL likely belongs to a company or organization website called Ideal Solutions PK, though no other context is provided about the content or purpose of the site.
Tehsil hqrs hospital hattian bala
The document is about a hospital located in Hattian Bala. It is the Tehsil HQRS Hospital, which provides medical services and solutions to the local community. In a brief and concise manner, the document names the hospital and location.
Industrial flooring
The document discusses industrial flooring requirements and solutions. Industrial floors must withstand heavy stress from production processes and chemicals while meeting operational needs like slip resistance and maintenance. They consist of a load-bearing concrete base and a protective wearing surface. Properly selecting and preparing the substrate is key to ensuring the flooring meets project demands cost-effectively. Requirements vary but may include withstanding traffic, chemicals, temperatures, and providing safety, aesthetics and easy maintenance. The suitable wearing course depends on the substrate type, location, condition, and any contamination or damage issues.
Business profile
Ideal Solutions was established in 2007 by construction and chemicals professionals to provide quality construction services using latest techniques. It has a team with extensive experience in numerous application projects. The company focuses on sales and technical support for construction chemicals. It strives for excellence and aims to exceed customer expectations through quality services and competitive prices. Ideal Solutions has completed many projects for government and private clients across Pakistan.
Our Services
IDEAL SOLUTIONS was established in 2007 by construction and chemicals professionals to provide quality services using latest techniques. The company aims to save clients time, money and issues. Well qualified teams have experience with numerous projects. The marketing division sells construction chemicals with technical support to end users. IDEAL SOLUTIONS strives for quality customer service and consistent improvements. The company approaches each project with flexibility and tailor-made solutions to develop long-term, mutually beneficial relationships. This has led to a reputation for quality backed by unmatched service in the region.
More from Rana Imran (20)
JOINT SEALING
- 1. PLOT NO.33, GATE D, STREET NO.10, I-9/2, ISLAMABAD, 0300-5080094, 0322-5064818, 051-4101145, Fax:051-4101146 info@idealsolutionspk.com, idspk@live.com. www.idealsolutionspk.com
- 2. TREATMENT OF EXPANSION JOINT AT BLOCK 115 BUILDING PAKISTAN AIR FORCE PAF ACADEMY RISALPUR PICTURES OF JOB DONE www.idealsolutionspk.com
- 3. Hump was created to stop leakage by Client’s Engineer on expansion joint
- 4. Hump was created to stop leakage by Client’s Engineer on expansion joint
- 5. Removal of Hump created by Client’s Engineer on expansion joint
- 6. Application of crystalline waterproofing material on surrounding areas of joint
- 9. Cutting of actual expansion joint
- 10. Cutting of actual expansion joint
- 11. Cutting of actual expansion joint
- 12. Removal of existing sealant from expansion joint
- 13. Found wetness after the Removal of existing sealant from expansion joint
- 14. Found wetness after the Removal of existing sealant from expansion joint
- 16. Found water stopper after going further deep
- 17. There was no concrete under water stopper & Steel was wet
- 18. There was no concrete under water stopper & Steel was wet
- 19. There was no concrete under water stopper & Steel was wet and rusted as well
- 20. The depth of removal of materials job from actual roof
- 31. Repair is done by chemicals and grouts
- 32. Repair is done by chemicals and grouts
- 33. Repair is done by chemicals and grouts
- 34. Sealant is being applied on the bottom of concrete slab
- 35. Sealant is being applied on the bottom of concrete slab
- 38. Finishing of sealant on the bottom of concrete slab
- 39. Finishing of sealant on the bottom of concrete slab water is standing over it
- 40. Finishing of sealant on the bottom of concrete slab water is standing over it
- 41. Finishing of sealant on the bottom of concrete slab water is standing over it
- 42. Sealing the joint up to the top of slab, Waterproofing coating was done and water is standing over it
- 43. Sealing the joint up to the top of slab, Waterproofing coating was done and water is standing over it
- 44. Sealing the joint up to the top of slab, Waterproofing coating was done and water is standing over it
- 45. Sealing the joint up to the top of slab, Water- proofing coating was done and water is standing over it
- 46. Sealing the joint up to the top of slab, Water- proofing coating was done and water is standing over it
- 47. Sealing the joint up to the top of slab, Water- proofing coating was done and water is standing over it
- 48. Final Water- proofing coating is being applied
- 49. Final Water- proofing coating is being applied
- 50. Final leveling by cement sand screed is being done by putting the sheet on expansion joint
- 51. Final leveling by cement sand screed is being done by putting the sheet on expansion joint
- 52. Final leveling by cement sand screed is being done by putting the sheet on expansion joint
- 53. Final leveling by cement sand screed is being done by putting the sheet on expansion joint
- 54. Final leveling by cement sand screed is being done by putting the sheet on expansion joint