kantoor 2020 circulair serviceconcept Presentatie market vision building holl...Willem Adriaanssen
presentatie market vision building Holland 2014
Kantoren 2020; circulair serviceconcept.
Dat is een kantoor waar…
een verschuiving heeft plaatsgevonden van eigendom naar gebruik. Werkplekken functiegericht zijn. ICT en gebouwautomatisering volledig zijn geïntegreerd in een ‘smart building’. Cradle-to-cradlematerialen standaard zijn en onderdeel van een circulair systeem. Exploitatiekosten lager zijn. Gebruikers zich kunnen richten op hun primair proces en alle secundaire processen zijn geregeld in een ‘total facility service’-oplossing.
April 2013 vond het seminar ‘De juridische consequenties van werken met BIM ‘ plaats bij AKD, vestiging Eindhoven. Deze PowerPoint presentatie met als titel: ‘Bouw Informatie Model (BIM), Samen bouwen aan een virtueel model!’ is toen gebruikt.
Heeft u vragen? Neem dan contact op met Leonie Mundt (lmundt@akd.nl) of Jacob Henriquez (jhenriquez@akd.nl).
kantoor 2020 circulair serviceconcept Presentatie market vision building holl...Willem Adriaanssen
presentatie market vision building Holland 2014
Kantoren 2020; circulair serviceconcept.
Dat is een kantoor waar…
een verschuiving heeft plaatsgevonden van eigendom naar gebruik. Werkplekken functiegericht zijn. ICT en gebouwautomatisering volledig zijn geïntegreerd in een ‘smart building’. Cradle-to-cradlematerialen standaard zijn en onderdeel van een circulair systeem. Exploitatiekosten lager zijn. Gebruikers zich kunnen richten op hun primair proces en alle secundaire processen zijn geregeld in een ‘total facility service’-oplossing.
April 2013 vond het seminar ‘De juridische consequenties van werken met BIM ‘ plaats bij AKD, vestiging Eindhoven. Deze PowerPoint presentatie met als titel: ‘Bouw Informatie Model (BIM), Samen bouwen aan een virtueel model!’ is toen gebruikt.
Heeft u vragen? Neem dan contact op met Leonie Mundt (lmundt@akd.nl) of Jacob Henriquez (jhenriquez@akd.nl).
A quickstart guide to your first Glassfish process which:
* Accepts input as webservice
* Writes data to a file on local harddisk
* Return a value to the calling webservice.
Component-based ontwikkelen met OSGi: van embedded tot enterpriseMarcel Offermans
After a short introduction about the origins of OSGi and the principles behind it, this presentation will focus on the current developments around component-based development. Although OSGi was created as a service-based platform for home gateways, it has grown into a universally applicable framework.
The talk will review JSR-277 and JSR-291, both of which are very close to OSGi and are targetted to standardize certain aspects of this technology as part of the JVM. Furthermore, several applications will be reviewed to illustrate that this architecture can be used in a broad range of environments, from mobile phones to enterprise applications.
Examples include: Eclipse, based on OSGi since 3.0, Apache Felix, an open source implementation that is the basis for several other projects such as the Apache Directory Server.
BIM State-of-the-Art (IE-Net Studiedag 16 Oktober 2013)Stefan Boeykens
Overview presentation (in Dutch) that was assembled in the context of a regional, Flemish workshop in October 2013, oriented to practitioners from the Construction Industry.
Dit is een selectie van recente projecten met daarin o.a. beschreven mijn vaardigheden en competenties. #UI #UX #Web #Human centered design #Responsive
Met trots deel mogen nemen aan het ontwerp voor de Industriele bakkerij van de supermarktenketen Hoogvliet. Waarbij we verantwoordelijk zijn geweest voor het ontwerp van de gebouwgebonden installaties en BIM coördinatie van de technische installaties.
Current update about integrated BIM and BIM manifest presented during an event organized by ADEB-VBA. A number of customer cases are presented by Besix, Buro II architects, deBIMspecialist, etc.
By Cloudalize. Virtual workspaces for BIM. www.gdaas.com
Building Information Modelling (BIM) is drastically reshaping methods and procedures in construction industry, not only in Belgium, but in whole Europe and the entire world. BIM is not just a new trend, it is a
paradigm shift supported by an entirely new way of thinking and doing.
SCIA nodigt u uit op 25/09 te Brussel. Ontdek onze reken-en tekensoftware.Rudi Vanmechelen ✉ SCIA
Op 25/09 stellen we u in het prestigieuze Pullman hotel te Brussel Midi (op een paar passen van de perrons van Thalys, TGV en Eurostar) onze reken- en tekensoftware voor. Live demo's van Scia Engineer, Allplan Engineering en hoe ze in te zetten in uw BIM proces. Ontdek hoe de meest gebruikte software in België ook bij u kunnen ingezet worden.
Ben je geïntereerd in werken in de websector? Dan is deze presentatie een must-read! David Bintein, CEO van Lodestar, een Gents web agency, presenteerde op vraag van HoGent zijn bevindingen na twintig jaar keihard werken aan het succes van zijn internetbedrijf.
BIM VOOR DE INSTALLATIETECHNIEK @ITANNEXJan Reedijk
Als gevolg van de huidige ontwikkelingen op gebied van BIM wordt aan de installateur en installatie adviseur steeds vaker gevraagd om te werken in 3D/BIM. Dit kan betekenen dat u binnenkort de stap zal maken naar het werken van 2D naar 3D, of wellicht heeft u deze stap al gemaakt. De informatie die het BIM model biedt, heeft veel toegevoegde waarde voor de installateur en installatie adviseurs. Met deze informatie kunt u berekeningen maken, die ervoor zorgen dat er sneller en goedkoper kan worden ontworpen en geproduceerd
Technologie evolueert steeds sneller. Op alle niveaus van het ontwerp worden we uitgedaagd door steeds meer geavanceerde digitale technologieën, soms geleend uit andere bedrijfstakken. Het ontwerpproces en de enorme hoeveelheid informatie die beschikbaar is om te manipuleren en te verkennen is eindeloos.
Building information Modeling is een proces. Sterker nog, momenteel is het voor veel bedrijven een veranderproces. Dat geldt ook voor u, de architect, de ingenieur, de aannemer en toeleverancier. We hebben er allemaal mee te maken.
Technologie evolueert steeds sneller. Op alle niveaus van het ontwerp worden we uitgedaagd door steeds meer geavanceerde digitale technologieën, soms geleend uit andere bedrijfstakken. Het ontwerpproces en de enorme hoeveelheid informatie die beschikbaar is om te manipuleren en te verkennen is eindeloos.
Building information Modeling is een proces. Sterker nog, momenteel is het voor veel bedrijven een veranderproces. Dat geldt ook voor u, de architect, de ingenieur, de aannemer en toeleverancier. We hebben er allemaal mee te maken.
A quickstart guide to your first Glassfish process which:
* Accepts input as webservice
* Writes data to a file on local harddisk
* Return a value to the calling webservice.
Component-based ontwikkelen met OSGi: van embedded tot enterpriseMarcel Offermans
After a short introduction about the origins of OSGi and the principles behind it, this presentation will focus on the current developments around component-based development. Although OSGi was created as a service-based platform for home gateways, it has grown into a universally applicable framework.
The talk will review JSR-277 and JSR-291, both of which are very close to OSGi and are targetted to standardize certain aspects of this technology as part of the JVM. Furthermore, several applications will be reviewed to illustrate that this architecture can be used in a broad range of environments, from mobile phones to enterprise applications.
Examples include: Eclipse, based on OSGi since 3.0, Apache Felix, an open source implementation that is the basis for several other projects such as the Apache Directory Server.
BIM State-of-the-Art (IE-Net Studiedag 16 Oktober 2013)Stefan Boeykens
Overview presentation (in Dutch) that was assembled in the context of a regional, Flemish workshop in October 2013, oriented to practitioners from the Construction Industry.
Dit is een selectie van recente projecten met daarin o.a. beschreven mijn vaardigheden en competenties. #UI #UX #Web #Human centered design #Responsive
Met trots deel mogen nemen aan het ontwerp voor de Industriele bakkerij van de supermarktenketen Hoogvliet. Waarbij we verantwoordelijk zijn geweest voor het ontwerp van de gebouwgebonden installaties en BIM coördinatie van de technische installaties.
Current update about integrated BIM and BIM manifest presented during an event organized by ADEB-VBA. A number of customer cases are presented by Besix, Buro II architects, deBIMspecialist, etc.
By Cloudalize. Virtual workspaces for BIM. www.gdaas.com
Building Information Modelling (BIM) is drastically reshaping methods and procedures in construction industry, not only in Belgium, but in whole Europe and the entire world. BIM is not just a new trend, it is a
paradigm shift supported by an entirely new way of thinking and doing.
SCIA nodigt u uit op 25/09 te Brussel. Ontdek onze reken-en tekensoftware.Rudi Vanmechelen ✉ SCIA
Op 25/09 stellen we u in het prestigieuze Pullman hotel te Brussel Midi (op een paar passen van de perrons van Thalys, TGV en Eurostar) onze reken- en tekensoftware voor. Live demo's van Scia Engineer, Allplan Engineering en hoe ze in te zetten in uw BIM proces. Ontdek hoe de meest gebruikte software in België ook bij u kunnen ingezet worden.
Ben je geïntereerd in werken in de websector? Dan is deze presentatie een must-read! David Bintein, CEO van Lodestar, een Gents web agency, presenteerde op vraag van HoGent zijn bevindingen na twintig jaar keihard werken aan het succes van zijn internetbedrijf.
BIM VOOR DE INSTALLATIETECHNIEK @ITANNEXJan Reedijk
Als gevolg van de huidige ontwikkelingen op gebied van BIM wordt aan de installateur en installatie adviseur steeds vaker gevraagd om te werken in 3D/BIM. Dit kan betekenen dat u binnenkort de stap zal maken naar het werken van 2D naar 3D, of wellicht heeft u deze stap al gemaakt. De informatie die het BIM model biedt, heeft veel toegevoegde waarde voor de installateur en installatie adviseurs. Met deze informatie kunt u berekeningen maken, die ervoor zorgen dat er sneller en goedkoper kan worden ontworpen en geproduceerd
Technologie evolueert steeds sneller. Op alle niveaus van het ontwerp worden we uitgedaagd door steeds meer geavanceerde digitale technologieën, soms geleend uit andere bedrijfstakken. Het ontwerpproces en de enorme hoeveelheid informatie die beschikbaar is om te manipuleren en te verkennen is eindeloos.
Building information Modeling is een proces. Sterker nog, momenteel is het voor veel bedrijven een veranderproces. Dat geldt ook voor u, de architect, de ingenieur, de aannemer en toeleverancier. We hebben er allemaal mee te maken.
Technologie evolueert steeds sneller. Op alle niveaus van het ontwerp worden we uitgedaagd door steeds meer geavanceerde digitale technologieën, soms geleend uit andere bedrijfstakken. Het ontwerpproces en de enorme hoeveelheid informatie die beschikbaar is om te manipuleren en te verkennen is eindeloos.
Building information Modeling is een proces. Sterker nog, momenteel is het voor veel bedrijven een veranderproces. Dat geldt ook voor u, de architect, de ingenieur, de aannemer en toeleverancier. We hebben er allemaal mee te maken.
1st block_BIM+NEWS in IDEA StatiCa Steel v22.0Jo Gijbels
BE SAFE, SAVE TIME, OPTIMIZE
IDEA StatiCa is software for steel connection design for all types of welded and bolted structural steel connections and base plates. It fastens your connection design process by:
The intuitive design of simple, moderate, and complex steel connections
Pass/fail results for 2D/3D, CHS/HSS steel connection as per AISC, EN etc.
250 ready-made templates, 10,000+ connection configurations
Ability to apply any loading for axial, shear and moment connections
The complete report including stiffness, seismicity, and buckling
General introduction of IDEA StatiCa Concrete 2022Jo Gijbels
DESIGN OF WALLS, BEAMS, AND CROSS-SECTIONS
IDEA StatiCa Concrete is a design software solution for all types of reinforced concrete cross-sections, beams, walls, diaphragms, frame joints, hangings, and brackets. It also provides code-checks of prestressed concrete members.
Design of simple as well as complex concrete details and cross-sections
Clear pass/fail results for any geometry, based on global building codes
Dozens of ready-made templates, import from DXF
Complete ULS/SLS checks, including cracks
IDEA STATICA FOR CONCRETE
Watch how IDEA StatiCa makes the concrete design visual. No matter the complexity of reinforcement or loading, you can design and code-check whatever your project requires. And get a comprehensive report which will prove it to everybody else. Need to deal with prestressing too? It has never been easier.
Checks for walls and details of concrete structuresJo Gijbels
Structural analysis and design of concrete structures is a challenging task – both because of
the natural complexity of the subject and because of the regulation an engineer has to
comply with to get the project done. The construction process has never been as fast as it is
today, and the pressure on cost-effectiveness of structures is growing with zero tolerance of
structural defects. In such an environment, engineers are pushed to work quicker, more
accurate and more reliably than ever before. And they need a different set of tools for that.
The development trend of IDEA StatiCa is to provide engineers with a generic, complete,
and easy-to-use solution for designing and dimensioning structural elements, cross-sections
and details in accordance with applicable standards. We believe that IDEA StatiCa Detail
provides a solution on the level of advanced non-linear programs, but at the same time it
will be commonly used for day-to-day practical design.
IDEA StatiCa Steel Connections v. 8.2 November 2017Jo Gijbels
Steel connection design Reinvented!
The first software in the world which can design and check all steel connections and joints. Clear pass/fail checks according to the code for welded and bolted connections, footing, and anchoring.
We are pleased to announce that a new version of IDEA StatiCa 8.2 has just been released!
The version 8.2 is full of new features. The anchoring has been extended for fully general cases, quick insertion of backing plates and lids, the new output report and much more. The brand new IDEA StatiCa Detail was released.
We are pleased to announce that a new version of IDEA StatiCa 8.2 has just been released!
The version 8.2 is full of new features. The anchoring has been extended for fully general cases, quick insertion of backing plates and lids, the new output report and much more. The brand new IDEA StatiCa Detail was released.
IDEA StatiCa introduces a novel way to design and check all steel connections and joints. With it, engineers can
break the limits of standard connection design tools to save time and optimize the material usage. Clear pass/fail
checks according to the code are available in minutes, as well as complete output reports.
IDEA StatiCa introduces a novel way to design and check all steel connections and joints. With it, engineers can
break the limits of standard connection design tools to save time and optimize the material usage. Clear pass/fail
checks according to the code are available in minutes, as well as complete output reports.
IDEA StatiCa introduces a novel way to design and check concrete details and walls. With it, engineers can break
the limits of standard design tools to save time and optimize the material usage. Clear pass/fail checks according
to the code are available in minutes, as well as complete output reports.
IDEA StatiCa introduces a novel way to design and check concrete details and walls. With it, engineers can break
the limits of standard design tools to save time and optimize the material usage. Clear pass/fail checks according
to the code are available in minutes, as well as complete output reports.
RFEM België is de Belgische verdeler van het succesvolle rekenprogramma RFEM van Dlubal. In en buiten België bevinden zich inmiddels meer dan 6.000 berdrijven en 25.000 gebruikers van Dlubal software. Met RFEM kan men op een zeer eenvoudige en praktische wijze civiele, mechanische, bijzondere en bouwkundige constructies uitrekenen in verschillende materialen zoals staal, beton, hout, aluminium en glas. Met name de stabiliteit van het programma, de praktische uitwerking en de zeer gebruikersvriendelijke en compacte uitvoer in combinatie met de lage onderhoudskosten helpt veel ingenieursbureau's, aannemers en overheden helpen efficiënter, goedkoper en effectiever berekeningen uit te voeren. RFEM is beschikbaar in verschillende normen en talen waaronder de Belgische NBN-EN bijlagen en de Nederlands en Franse taal.
Thesis Dlubal RFEM EC3 Fire UHasselt 2017Jo Gijbels
Presentatie van studenten Industrieel Ingenieur Bouwkunde aan de KU Leuven / UHasselt over Dlubal RFEM met als doel te vergelijken met de Eurocode 1993 voor brand.
Eindwerk IDEA Steel Connection KU Leuven 2017Jo Gijbels
Presentatie van studenten Industrieel Ingenieur Bouwkunde aan de KU Leuven over IDEA Steel Connections met als doel te vergelijken met de Eurocode 1993-1-8
Onlangs behaalden we het IFC 2x3 certficatie voor onze RFEM en RSTAB rekensoftware. Een belangrijke bevestiging dat we in de goed richting gaan met ons BIM-verhaal
Bekijk hier klanten projecten gemaakt met RFEM en RSTAB rekensoftware van Dlubal. Zowel beton, staal, hout en nog veel andere materialen worden gebruikt in de voorbeelden.
2. “Whitebox voorziet zijn klanten van rekensoftware om de
stabiliteit van constructies in o.a. staal, beton en hout te
verzekeren”
3. MY BUSINESS
• Core business: Software- en dienstenleverancier
gespecialiseerd in stabiliteitssoftware voor de bouwwereld
• Missie: Whitebox verdeelt, ondersteunt en ontwikkelt
rekensoftware voor ingenieurs en bouwprofessionals
• Visie: Whitebox brengt nieuwe technologie zoals Cloud
computing en Building Information Model (BIM) naar de
markt
8. ABOUT MYSELF
• Jo Gijbels www.linkedin.com/in/jogijbels
Twitter @jogijbels
• Ingenieur Bouwkunde MSc.
• 10 jaar ervaring in stabiliteit studies en
rekensoftware bij Echo, Gijbels Group,
Nemetschek
• Post graduaat Bedrijfskunde UHasselt
• Zaakvoerder van Whitebox bvba
9. REALISED UNTIL TODAY
• Opstartjaar 2012
• Exclusieve verdeler van IDEA RS, AxisVM & RFEM (Dlubal)
rekensoftware in de BeNeLux
• Opbouw eerste klanten waaronder De Scheepvaart
• Partnership met Belgacom BeCloud
10. REALISED UNTIL TODAY
• Klanten opgebouwd in verschillende sectoren
• Studieburelen: Neyens Engineering
• Staal industrie: Timmers Cranes and Steelworks & Ellimetal
• Beton industrie: Houben (Airdeck)
11. REALISED UNTIL TODAY
• Tweede werkjaar 2013
• Verdere uitbouw van marktpositie in BeNeLux
• 30+ klanten in België
• Naambekendheid Whitebox Software in de pers
• Eerste bedrijfsevent op wo. 11 dec. C-mine Genk