FOR MORE CLASSES VISIT
www.iscom305outlet.com
ISCOM 305 Assignment Week 1 Importance of Operations Paper
ISCOM 305 Assignment Week 2 Scenario and Topic Approval
For more classes visit
www.snaptutorial.com
ISCOM 305 Assignment Week 1 Importance of Operations Paper
ISCOM 305 Assignment Week 2 Scenario and Topic Approval
ISCOM 305 Assignment Week 2 New Hire Training Program
ISCOM 305 Assignment Week 3 Executive Communication on New Product Part I
ISCOM 305 Assignment Week 3 Legoland Forecasting Application
FIN 585 Effective Communication - snaptutorial.comdonaldzs15
For more classes visit
www.snaptutorial.com
This Tutorial contains 2 Papers
Select an organization with which you are familiar.
Create a 700- to 1,050-word paper or 16- to 24-slide presentation using a modality of your choice.
Describe the following:
Fin 585 Enhance teaching / snaptutorial.comBaileya5
For more classes visit
www.snaptutorial.com
This Tutorial contains 2 Papers
Select an organization with which you are familiar.
Create a 700- to 1,050-word paper or 16- to 24-slide presentation using a modality of your choice.
Describe the following:
The organization including its profit/nonprofit status.
Manufacturing/service type.
The roles and responsibilities of the financial controller.
FOR MORE CLASSES VISIT
www.iscom305outlet.com
ISCOM 305 Assignment Week 1 Importance of Operations Paper
ISCOM 305 Assignment Week 2 Scenario and Topic Approval
For more classes visit
www.snaptutorial.com
ISCOM 305 Assignment Week 1 Importance of Operations Paper
ISCOM 305 Assignment Week 2 Scenario and Topic Approval
ISCOM 305 Assignment Week 2 New Hire Training Program
ISCOM 305 Assignment Week 3 Executive Communication on New Product Part I
ISCOM 305 Assignment Week 3 Legoland Forecasting Application
FIN 585 Effective Communication - snaptutorial.comdonaldzs15
For more classes visit
www.snaptutorial.com
This Tutorial contains 2 Papers
Select an organization with which you are familiar.
Create a 700- to 1,050-word paper or 16- to 24-slide presentation using a modality of your choice.
Describe the following:
Fin 585 Enhance teaching / snaptutorial.comBaileya5
For more classes visit
www.snaptutorial.com
This Tutorial contains 2 Papers
Select an organization with which you are familiar.
Create a 700- to 1,050-word paper or 16- to 24-slide presentation using a modality of your choice.
Describe the following:
The organization including its profit/nonprofit status.
Manufacturing/service type.
The roles and responsibilities of the financial controller.
For more classes visit
www.snaptutorial.com
This Tutorial contains 2 Papers
Select an organization with which you are familiar.
Create a 700- to 1,050-word paper or 16- to 24-slide presentation using a modality of your choice.
Bus 423 Enthusiastic Study / snaptutorial.comGeorgeDixon75
Mark Jones, a Production Manager, has been transferred from the manufacturing plant in his hometown of Chicago to his company's overseas manufacturing plant in Osaka, Japan.
For more classes visit
www.snaptutorial.com
AMP 415 Module 1 Assignment
Using Excel, prepare a classified balance sheet and multistep income statement using the Adjusted Trial Balance for ABC Corporation as of and for the year ended December 31, 2010.
Fin 585 Enthusiastic Study / snaptutorial.comStephenson96
This Tutorial contains 2 Papers
Select an organization with which you are familiar.
Create a 700- to 1,050-word paper or 16- to 24-slide presentation using a modality of your choice.
Describe the following:
• The organization including its profit/nonprofit status.
FIN 585 Effective Communication - tutorialrank.comBartholomew34
For more course tutorials visit
www.tutorialrank.com
This Tutorial contains 2 Papers
Select an organization with which you are familiar.
Create a 700- to 1,050-word paper or 16- to 24-slide presentation using a modality of your choice.
Describe the following:
The organization including its profit/nonprofit status.
Manufacturing/service type.
The roles and responsibilities of the financial controller.
The major stakeholders of your chosen organization
Fin 585 Believe Possibilities / snaptutorial.comDavis18a
For more classes visit
www.snaptutorial.com
This Tutorial contains 2 Papers
Select an organization with which you are familiar.
Create a 700- to 1,050-word paper or 16- to 24-slide presentation using a modality of your choice.
For more classes visit
www.snaptutorial.com
AMP 415 Module 1 Assignment
Using Excel, prepare a classified balance sheet and multistep income statement using the Adjusted Trial Balance for ABC Corporation as of and for the year ended December 31, 2010.
You are not required to submit this assignment to Turnitin.
FIN 585 Education Specialist / snaptutorial.com McdonaldRyan86
For more classes visit
www.snaptutorial.com
This Tutorial contains 2 Papers
Select an organization with which you are familiar.
Create a 700- to 1,050-word paper or 16- to 24-slide presentation using a modality of your choice.
Describe the following:
Fin 550 Massive Success / snaptutorial.comNorrisMistryzh
Assignment 1: Analyzing Your Portfolio
Due Week 5 and worth 250 points
This assignment is based on the portfolio you have created using the StockTrak Portfolio Simulation software, found at http://stocktrak.com/ . Make sure to show your work for any calculations, as well as include any charts or graphs that illustrate key concepts.
Write a paper of at least five (5) pages in which you:
Using the data available for the company comprising the largest percentage of your portfolio, calculate the dividend payout ratio, growth rate of the company’s dividends, price-to-earnings (P/E) ratio, and the maximum P/E ratio that you would apply to this stock using the most recent earnings per share (EPS).
ISCOM 305 Effective Communication - snaptutorial.comdonaldzs22
For more classes visit
www.snaptutorial.com
ISCOM 305 Assignment Week 1 Importance of Operations Paper
ISCOM 305 Assignment Week 2 Scenario and Topic Approval
For more classes visit
www.snaptutorial.com
This Tutorial contains 2 Papers
Select an organization with which you are familiar.
Create a 700- to 1,050-word paper or 16- to 24-slide presentation using a modality of your choice.
Bus 423 Enthusiastic Study / snaptutorial.comGeorgeDixon75
Mark Jones, a Production Manager, has been transferred from the manufacturing plant in his hometown of Chicago to his company's overseas manufacturing plant in Osaka, Japan.
For more classes visit
www.snaptutorial.com
AMP 415 Module 1 Assignment
Using Excel, prepare a classified balance sheet and multistep income statement using the Adjusted Trial Balance for ABC Corporation as of and for the year ended December 31, 2010.
Fin 585 Enthusiastic Study / snaptutorial.comStephenson96
This Tutorial contains 2 Papers
Select an organization with which you are familiar.
Create a 700- to 1,050-word paper or 16- to 24-slide presentation using a modality of your choice.
Describe the following:
• The organization including its profit/nonprofit status.
FIN 585 Effective Communication - tutorialrank.comBartholomew34
For more course tutorials visit
www.tutorialrank.com
This Tutorial contains 2 Papers
Select an organization with which you are familiar.
Create a 700- to 1,050-word paper or 16- to 24-slide presentation using a modality of your choice.
Describe the following:
The organization including its profit/nonprofit status.
Manufacturing/service type.
The roles and responsibilities of the financial controller.
The major stakeholders of your chosen organization
Fin 585 Believe Possibilities / snaptutorial.comDavis18a
For more classes visit
www.snaptutorial.com
This Tutorial contains 2 Papers
Select an organization with which you are familiar.
Create a 700- to 1,050-word paper or 16- to 24-slide presentation using a modality of your choice.
For more classes visit
www.snaptutorial.com
AMP 415 Module 1 Assignment
Using Excel, prepare a classified balance sheet and multistep income statement using the Adjusted Trial Balance for ABC Corporation as of and for the year ended December 31, 2010.
You are not required to submit this assignment to Turnitin.
FIN 585 Education Specialist / snaptutorial.com McdonaldRyan86
For more classes visit
www.snaptutorial.com
This Tutorial contains 2 Papers
Select an organization with which you are familiar.
Create a 700- to 1,050-word paper or 16- to 24-slide presentation using a modality of your choice.
Describe the following:
Fin 550 Massive Success / snaptutorial.comNorrisMistryzh
Assignment 1: Analyzing Your Portfolio
Due Week 5 and worth 250 points
This assignment is based on the portfolio you have created using the StockTrak Portfolio Simulation software, found at http://stocktrak.com/ . Make sure to show your work for any calculations, as well as include any charts or graphs that illustrate key concepts.
Write a paper of at least five (5) pages in which you:
Using the data available for the company comprising the largest percentage of your portfolio, calculate the dividend payout ratio, growth rate of the company’s dividends, price-to-earnings (P/E) ratio, and the maximum P/E ratio that you would apply to this stock using the most recent earnings per share (EPS).
ISCOM 305 Effective Communication - snaptutorial.comdonaldzs22
For more classes visit
www.snaptutorial.com
ISCOM 305 Assignment Week 1 Importance of Operations Paper
ISCOM 305 Assignment Week 2 Scenario and Topic Approval
2.2 Assignment: Totaling Costs
Getting Started
Production and cost are the fundamental building blocks on the supply side of the market. In this assignment you will learn how to calculate costs and construct cost schedules.
Upon successful completion of this assignment, you will be able to:
Describe the determinants of a firm’s output and costs in the long run.
Use cost relationships to predict a firm’s profit-maximizing decisions.
Resources
Textbook:
Economics for Managers
File: Ch05.ppt
Media: Costs of Production
Background Information
In this assignment you will learn how to calculate costs and construct cost schedules for a small business.
Instructions
Review the rubric to make sure you understand the criteria for earning your grade.
Read Chapter 5, “Production and Cost Analysis in the Short Run,” in
Economics for Managers
. As you read, think about what it costs you to do some basic task.
Download and review the
Ch05.ppt
PowerPoint file.
View the media:
Costs of Production
. This lecture presentation covers output and costs in the short run, deriving long-run average cost and firm profit maximization.
Assess data (in the table below) related to a small lawn mowing business.
Angela hires students at $40 a day to mow lawns.
Regardless of the number of students she hires, Angela leases five lawn mowers for $200 a day.
The following table gives the daily output:
Labor
(students per day)Total Product
(lawns cut per day)0012024437049451146120
Write a one- to two-page paper that addresses the following. Be sure to show your calculations.
Construct the average fixed cost, average variable cost, and average total cost schedules.
Construct the marginal cost schedule.
Check that the gap between total cost and total variable cost is the same at all output levels. Explain why this relationship is so important and demonstrate clear insightful and critical thinking.
When you have completed your assignment, save a copy for yourself and submit a copy to our instructor by the end of the workshop.
==========================================================
2.3 Discussion: Economies of Scale
Getting Started
You will examine production and cost issues in the long run, where all inputs in a production process are variable, using a case study.
Upon successful completion of this discussion, you will be able to:
Interpret a long-run production function in which all inputs can be varied and possibly substituted for each other.
Explain how production and cost analysis is used in management decision making.
Resources
Textbook:
Economics for Managers
Video: COVID-19
Background Information
This information and activity build on the short-run production and cost issues covered in the previous workshop.
Instructions
Review the rubric to make sure you understand the criteria for earning your grade.
Read Chapter 6 and review Chapter 5 in
Economics for Managers.
As you read, think a.
FOR MORE CLASSES VISIT
www.ops571genius.com
This Tutorial contains 2 Papers of this Assignment About Your Signature Assignment This signature assignment is designed to align with specific program student learning outcome(s) in your program. Program Student Learning Outcomes are broad statements that describe what students should know and be able to do upon completion of their degree. The signature assignments may be graded with an automated rubric that allows the University to collect data that can be aggregated across a location or college/school
For more course tutorials visit
www.tutorialrank.com
Tutorial Purchased: 2 Times, Rating: B+
Risk Management. Risk management is a critical aspect of project management. The supply chain decisions that are made have risk involved like any other project decision. Comment on two examples of risks that can occur in the supply chain that can affect a project
BUS 212 Effective Communication/tutorialrank.comjonhson256
For more course tutorials visit
www.tutorialrank.com
BUS 212 Week 1 Business Strategy (Apple)
BUS 212 Week 1 Business Strategy (Ford Motor)
BUS 212 Week 2 Signature Assignment Different Forms of Business Organizations (Apple)
For more classes visit
www.snaptutorial.com
Observe the critical path diagram. Why are there two arrows pointing to task F?
Why is the critical path shown as A-B-E-G-I? How is the critical path defined?
What would happen if activity F was revised to take 4 days instead
For more course tutorials visit
www.newtonhelp.com
a. Observe the critical path diagram. Why are there two arrows pointing to task F?
b. Why is the critical path shown as A-B-E-G-I? How is the critical path defined?
c. What would happen if activity F was revised to take 4 days instead of 2days?
OPS 571 Effective Communication - tutorialrank.comBartholomew54
For more course tutorials visit
www.tutorialrank.com
a. Observe the critical path diagram. Why are there two arrows pointing to task F?
b. Why is the critical path shown as A-B-E-G-I? How is the critical path defined?
What would happen if activity F was revised to take 4 days instead of 2days
Operations, Technology, Management, and Social Responsibility .docxamit657720
Operations, Technology, Management, and Social Responsibility Plan (With Financials)
Overview
In this assignment, you will focus on these sections of your business plan:
Operations.
Technology.
Management.
Social Responsibility.
Financials.
You will revise the Operations, Social Responsibility, and Financials sections based on the feedback you received in the discussion threads and any changes you want to make to your business plan.
The Technology and Management and Organization sections are new. You have not worked on these sections in your discussion threads.
The assignment consists of two parts:
The business plan (an MS Word document).
Business plan financials (using the Business Plan Financials Excel Template).
To successfully complete this assignment, you must attach both documents to the submission area as separate files and then click
Submit
.
Reminders and Notes
Your chosen company will operate in a 100-mile radius from your home address. Your goal is to reach $1 million in sales by the end of the second year.
Be sure to follow the guidelines, whether you use the snack food company scenario or the company of your choice:
Snack Food Company Guidelines [DOCX]
.
Company of Your Choice Guidelines [DOCX]
.
You are not starting this assignment from scratch. You have already worked on these sections of your business plan in the weekly discussions:
Operations (Week 5 discussion).
Social Responsibility (Week 6 discussion).
Financials (Week 7 discussion).
Part 1: Business Plan
Write a 4–8 page paper, in MS Word, in which you provide the specified information in each section.
Operations Section (1–2 pages)
Notes:
Chapter 11, “Operations,” pages 195–218, provides information about developing an operations plan. The chapter also provides a sample operations plan. You've already read this chapter in Week 5. Refer to it on an as needed basis as you work on this section of your business plan.
Assign a dollar amount to each operational cost you find; you will need these figures for your financials (Business Plan Financials Excel Template).
If you are working with the snack food company scenario, be sure to use the information and costs provided in the Snack Food Company Guidelines.
Revise your post and the feedback you received on it in the Week 5 discussion thread to create your operations plan.
Instructions:
Create an
operations plan
for your selected company expanding on each of these topics:
Facilities.
Consider questions such as these regarding facilities:
Will you rent or buy your facilities, or will you outsource production to an existing company?
If you are renting or buying your facilities, what utilities will be required to run the operation?
What will be the costs associated with any necessary utilities?
Production Process or Description of How Your Business Will Operate If Retail or Service Company.
Include any
equipment
you plan to u.
Similar to ISCOM 305 TUTORIALS Education Counseling--iscom305tutorials.com (20)
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
Normal Labour/ Stages of Labour/ Mechanism of LabourWasim Ak
Normal labor is also termed spontaneous labor, defined as the natural physiological process through which the fetus, placenta, and membranes are expelled from the uterus through the birth canal at term (37 to 42 weeks
Safalta Digital marketing institute in Noida, provide complete applications that encompass a huge range of virtual advertising and marketing additives, which includes search engine optimization, virtual communication advertising, pay-per-click on marketing, content material advertising, internet analytics, and greater. These university courses are designed for students who possess a comprehensive understanding of virtual marketing strategies and attributes.Safalta Digital Marketing Institute in Noida is a first choice for young individuals or students who are looking to start their careers in the field of digital advertising. The institute gives specialized courses designed and certification.
for beginners, providing thorough training in areas such as SEO, digital communication marketing, and PPC training in Noida. After finishing the program, students receive the certifications recognised by top different universitie, setting a strong foundation for a successful career in digital marketing.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
1. ISCOM 305 All Assignments
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
ISCOM 305 Assignment Week 1 Importance of Operations
Paper ISCOM 305 Assignment Week 2 Scenario and Topic
Approval ISCOM 305 Assignment Week 2 New Hire Training
Program ISCOM 305 Assignment Week 3 Executive
Communication on New Product Part I ISCOM 305 Assignment
Week 3 Legoland Forecasting Application ISCOM 305
Assignment Week 4 Executive Communication on New
Product: Part II ISCOM 305 Assignment Week 4 Toyota Lean
Application ISCOM 305 Assignment Week 5 Executive
Communication on New Product Final Deliverable ISCOM 305
Assignment Week 5 Material Requirements Planning (MRP)
and ERP Application
==============================================
ISCOM 305 Assignment New product Launch Plan
organization approval (Apple)
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
2. Research and identify an organization that will be used for this
and subsequent Learning Team assignments. Attain faculty
approval. Write a 700- to 1,050-word paper in which you
identify a new product your company will introduce. Address
each of the following in your paper: • Identify your company
and give a short background on the business including their
mission, vision, goals, and objectives. • Identify the new product
you will develop and roll out to the customer. • Describe how
the design team will include the following functions and
organizations, explaining the role for each team member: •
Marketing • Engineering • Operations • Supply Chain
• Quality • Key Suppliers • How will you use technology
in the development, manufacture, and supply chain of your new
product? • How will you ensure the quality of the product in
its design and production? Format your paper consistent with
APA guidelines The company it needs to be on Apple and they
product they are developing is a water resistant phone. I chose
this topic because one of Apples competitors Verizon recently
came out with their own water resistant phone.
==============================================
ISCOM 305 Assignment Week 1 Importance of Operations
Paper
3. FOR MORE CLASSES VISIT
www.iscom305tutorials.com
ISCOM 305 Week 1 Importance of Operations Paper Write a 700- to
1,050-word paper in which you describe the importance of operations
and supply chain management to a company's strategy. Discuss the
differences between goods and services. Explain the operational
components of plan, source, make and deliver. Describe potential
sourcing strategies. Format your paper consistent with APA guidelines.
Use at least 2 academic resources for your paper. Click the Assignment
Files tab to submit your assignment.
==============================================
ISCOM 305 Assignment Week 2 New Hire Training Program
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
ISCOM 305 Week 2 New Hire Training Program You are working as an
Operations Manager for a growing company. The company has plans to
develop several new products over the next five years and is currently
hiring new graduates to help with this endeavor. These graduates have
either Marketing or Engineering degrees, and may not have taken any
operations classes. You have been asked by the Vice President of
Human Resources to develop one of the modules for their training. Be
4. sure the training keeps your audience in mind. You may use any medium
that you choose, including written, visual, audio, or a combination of
media. The goal is to deliver a self-driven training. Develop a module
that will allow the new hire to gain an understanding of the impact of
product design on operations and supply chain strategy. The module
should be a length of either 700 to 1,050 words, 6 to 10 slides, or 5
minutes of video/audio. Explain the importance of the product design
process and how the connection of designing new products can impact
the production processes. Describe various techniques to improve the
efficiency and effectiveness of operations. Be sure to give a specific
example that uses a quality tool or technique so the new hire can grasp
this application. Diagram the components of the distribution or logistics
operation of your company and identify technology upgrades that the
company may be considering in the next five years to enhance
operations as it applies for any of the components. Cite at least two
academic resources consistent with APA guidelines. Note: a Reference
page can be submitted along with any media you used. Click the
Assignment Files tab to submit your assignment.
==============================================
ISCOM 305 Assignment Week 2 Scenario and Topic Approval
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
ISCOM 305 Week 2 Scenario and Topic Approval You have been
chosen by your company's Executive Committee to address operations
5. and supply chain strategies, plans, and decisions as they apply to a new
product that the company is considering. Your objective is to create a
paper or presentation about the new product for the Executive
Committee in Week 5. The team must use the same format in Weeks 3,
4 and 5 of the team assignment. You will be applying course content to
this team assignment. Be sure your paper or script tone is appropriate for
your executive audience. Each team member should bring ideas to the
team discussion. As a team, you will select the company and product.
Select the company and the product that you will be using in future
weeks. Submit your idea for faculty approval. Click the Assignment
Files tab to submit your assignment.
==============================================
ISCOM 305 Assignment Week 3 Executive Communication on
New Product Part I
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
ISCOM 305 Week 3 Executive Communication on New Product: Part I
Create a 700- to 1,050-word paper or an 8- to 12-slide visual
presentation with speakers' notes for each slide in which you identify the
new product that your company will consider. Address each of the
following, and ensure that you explain your rationale for each item: •
Orientate the Executive Committee by giving a short background on the
mission, vision, goals, and objectives of the company and how they
relate to the new product. • Determine the supply chain for your new
6. product in a visual format. •Address whether you will or will not use
global suppliers for your new product. • Address whether you will
or will not outsource any of the new product's supply chain. • Determine
the Process Focus for your new product. • Discuss what quality tools and
techniques you will use to improve process, production, productivity,
customer experience etc. Why will these apply? Format your assignment
consistent with APA guidelines. Use at least 2 academic references.
Click the Assignment Files tab to submit your assignment.
==============================================
ISCOM 305 Assignment Week 3 Legoland Forecasting
Application (2 Papers)
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
This Tutorial contains 2 Papers ISCOM 305 Week 3 Legoland®
Forecasting Application Study the Week 3 Virtual Company
Tours. Answer the following questions in short answer or list
format. Each answer must be at least 300 words. •Why is
forecasting important to the Legoland® California Resort? •
What are the forecasting techniques that Legoland® might
find helpful when forecasting and why? • What events might
occur that could produce a significant error in Legoland's®
forecast on any particular day? • Based on your assessment of
all of the rides, attractions, and restaurants, provide a rough
7. estimate for the number of guests that the park can
accommodate at any given time. Then provide a rough estimate
of the number of employees needed in the park on a busy day.
How many employees would be needed on a day with light
attendance?Format any resources used consistent with APA
guidelines. Click the Assignment Files tab to submit your
assignment.
==============================================
ISCOM 305 Assignment Week 4 Executive Communication on
New Product: Part II
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
ISCOM 305 Week 4 Executive Communication on New Product: Part II
Adjust your introduction and conclusion (if needed) to include the
following additions and incorporate any feedback from the instructor.
Add an additional 700 to 1,050 words to your Week 3 assignment or
produce an additional 6 to 9 slides. Address each of the following, and
ensure that you explain your rationale for each item: • Discuss the use
of new technologies and how they will support your new product. •
Discuss a forecasting technique for your new product and why it
applies to this product. • Identify the inventory optimization methods
that you will use in your supply chain management strategy. How do
these specifically apply to your new product? • Explain your
8. aggregate plan and how it applies to your product. Format your paper
consistent with APA guidelines. Use at least 2 academic references.
Click the Assignment Files tab to submit your assignment.
==============================================
ISCOM 305 Assignment Week 4 Toyota Lean Application (2
Papers)
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
This Tutorial contains 2 Papers ISCOM 305 Week 4 Toyota
Lean Application Resources: Ch. 6 and 16 of Operations
Management View the Week 4 Virtual Company Tours of
Toyota Motor Manufacturing, Kentucky. Explore TPS (Toyota
Production System) located under the Operations tab (upper left
page). Answer the following short answer questions in at least
300 words each: • What is the definition offered for kaizen?
How do Toyota and its employees benefit from kaizen? •
Compare the principles of Six Sigma (Week 2, Ch. 6) with
Lean (this week, Ch. 16) as it relates to TPS. Use specific
examples from TPS as seen in the video. Cite academic
resources you may have used and format your answers
consistent with APA guidelines. Click the Assignment Files tab
to submit your assignment.
9. ==============================================
ISCOM 305 Assignment Week 5 Executive Communication on
New Product Final Deliverable
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
ISCOM 305 Week 5 Executive Communication on New Product: Final
Deliverable Finalize your assignment to include the following additions
and incorporate any feedback from the instructor. Add to the assignment
by writing an additional 525 to 700 words to your paper, or produce an
additional 5 to 7 slides. Address each of the following, and ensure you
explain your rationale for each item: • Determine the metrics that you
will use to evaluate the supply chain of your new product. • Discuss
how you will apply the concept of learning curves to the operations and
supply chain of this new product. What functional area may benefit from
this application? • Discuss how you plan to improve system
reliability through metrics and maintenance for your new product.
Format your paper consistent with APA guidelines. Use at least 2
academic references. Click the Assignment Files tab to submit your
assignment.
==============================================
10. ISCOM 305 Assignment Week 5 Material Requirements
Planning (MRP) and ERP Application (2 Papers)
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
This Tutorial contains 2 Papers ISCOM 305 Week 5 Material
Requirements Planning (MRP) and ERP Application Materials
Requirements Planning (MRP) and ERP Application answer the
short answer questions under your choice in at least 300-words
each. Option 1: SPEDE Technologies View the SPEDE
Technologies information. 1. Which modules show direct
interfaces with ERP on the SPEDE Plant Diagram? (Note: this
answer can be less than 200words) 2. What is the importance
of a direct interface for these two modules? 3. Comment on
the importance for customer use of ERP and supplier use of
ERP. Format your answers consistent with APA guidelines. Cite
academic resources you may have used. Click the Assignment
Files tab to submit your assignment. Option 2: Defiance Metal
Products View the Defiance Metal Products information. 1. Take
the virtual tour at Defiance Metal Products. How would their
MRP system facilitate the material purchase process? 2.
Does the use of manufacturing cells help or hurt the
interface with their MRP system? Why?
==============================================
11. ISCOM 305 CASE PROBLEM 16 2 Wheres My Cart
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
CASE PROBLEM 16.2: Where’s My Cart? The Senior Seminar
at Allegheny State requires students to complete a process
improvement project with local industry. Jim Davis and Leanna
Hearn have been assigned to Wiley Construction. Here is their
report. Wiley Construction Company History Founded in 1975,
Wiley Construction was one of the first designers and builders
of wooden roof trusses. Over the past 40 years Wiley has
prospered, and it now has office and manufacturing space of
approximately 132,200 square feet and additional lumber
storage facilities of about 22,300 square feet, on a 60-acre site
near the Monongahela River in Pittsburgh, Pennsylvania.
Utilization of this space has never been difficult, and in the fall
of 2000 Wiley proudly opened a new 6000-square-foot
showroom, which serves as an educational building center and
showcase for many of the products it builds and/or sells. In
addition to its core roof truss business, Wiley now has over 200
employees designing and building floor truss systems and
preconstructed interior and exterior wall systems. Joseph Wiley,
the founder and chairman of Wiley Construction, not only
12. wanted to build superior roofing systems, he also envisioned the
idea of prepackaging an entire house. The package of materials,
from foundation blocks to roofing shingles, would be available
through one source. This idea soon led for a custom-designed
line of homes, called Wiley Homes. The key selling point to
these “prepackaged” homes besides convenience and accuracy,
was that, while the interior layout was universally applicable,
the exterior of the home was designed with a very local flavor.
The exemplary reputation of the Wiley Home program as well
as attention to customer service, prompt delivery times, and
accurate product specifications allowed Wiley to become an
international supplier of quality building products. Their
products have been shipped to dozens of countries, including
Russia, Germany, Spain, Japan, Korea, China, Greece, Turkey,
Mexico, and Chile. Gary Cox replaced Joe Wiley as president of
Wiley Construction in January 2013. Executive Vice President
Ciro Alvarez is one of the many highly skilled and motivated
Wiley professional management employees. To accomplish its
diverse objectives, the company has assembled a team of
employees with degrees in Architecture, Building Construction,
Civil Engineering, Math, Forestry, Wood Science, Accounting,
Business, International Relations, Computer Science,
Architectural Technology, and Biological Systems Engineering.
Technology From the days of hand drafting and manually
designed framing layouts, Wiley now utilizes highly automated
methods of production as well as completely computerized
design programs. These technologies have resulted in annual
13. sales approaching $25 million. The most automated piece of
equipment at their Pittsburgh facility is a Uni-saw, a highly
sophisticated machine capable of simultaneously making the
necessary angle adjustments on four circular saw blades. One of
Wiley’s newest endeavors is the construction of prefabricated
wall panels, for which it now has a new wall panel machine to
more efficiently construct a higher quality wall panel. The new
partially computer-controlled machine was designed especially
for Wiley and is one of the best in the industry. In order to
maximize the utility of its automated capabilities, Wiley
employs nearly 50 computer operators and programmers
experienced in engineering, design, export, sales, and
accounting software systems. Central to the operation is the
highly specialized wooden-truss design program used by the
engineering staff. To ensure that all of this technology results in
the highest quality products, the Wiley production facility is one
of a very small percentage of facilities that opens their doors to
the rigid quality-control specifications of the Pre-Fab
Construction Industry. Current Production Process Wiley
Housing Systems, Inc., is a batch production company that
specializes in make-to-order timber housing systems. The
manufacturing facility is over 100,000 square feet in size (see
the accompanying figure) and is sectioned off into different
areas such as wall, floor, and roof truss assembly, raw material
cutting, and metal storage. Each of the assembly lines is fed by a
common 26,000 square foot on-site supply point. The only
required materials are common-sized lumber (i.e., 2 × 4, 2 × 6,
14. etc.), aluminum connecting plates, and nails. However, each of
the processes is tailored to meet customer demands and
specifications. All of Wiley’s products are constructed of
standard dimensional lumber that arrives via truck or train and is
stockpiled in its lumber yard. Typically, Wiley has enough
lumber on site for two weeks of continuous operation without
replenishment. All other inventory, work-in-process, and
common materials are stored inside the production facility. Once
an order is received, the staff engineers design the truss system
and electronically queue the order for manufacture. The
production foreman then assigns the order to a cutting team.
This team consists of two men—the sawer and the tailor. The
sawer is responsible for saw setup, as well as lumber retrieval
and optimization, while the tailor stacks and labels the cut
lumber for assembly. Mr. Alvarez explained that his major
concern was the amount of setup time required by the cutting
teams. He said that up to 45% of production time was spent
adjusting the saws for each job, a very typical problem in batch
production. This is where Wiley’s problem and our challenge
began. Process Improvement After our initial plant tour, where
we noted the large amount of work-in-process inventory waiting
in carts between the saws and the assembly stations, we spent a
day interviewing workers on the assembly teams. It was brought
to our attention that at certain points during the day the backup
of WIP carts was in fact problematic, from the standpoint of
worker safety and from the ability to locate the required cart
quickly and easily. There are approximately 80 to 90 carts in use
15. at any given time, which are loaded with raw materials on a per-
job basis and are tagged with a work order. After the carts are
loaded and tagged, they are placed in front of the assembly
workstations. Copies of the work orders are taken to the plant
control office. The plant supervisor then assigns the jobs to
assembly stations by placing the work order copy in assigned
bins located on the plant control office wall. The assembly
employees will go to their assigned bin, pick their next job
ticket, and then locate the corresponding cart for that job. Mr.
Alvarez mentioned that locating the cart required for the next
job could take anywhere from one to ten minutes depending on
the assembly backup (number of full carts used that day) and the
location of the cart within the facility. The manufacturing
employees are tracked on a 100th-of-the-hour time basis for
work, which means that there should, in theory, be very little
unproductive time during the day, with the exception of break
periods. This also reduces socialization of employees. We
decided to narrow our analysis to the immediate problem of
locating the correct cart. After brainstorming possible solutions,
we have concluded that Wiley should use an electronic paging
system similar to what restaurants use to notify customers that
their table is ready. We recommend that the carts be outfitted
with long-life, durable, and replaceable lithium battery-powered
strobe lights that are activated by a keypad located on the plant
control office wall beside the pending job order bins. Each light
would have a unique three-digit number assigned to it. These
numbers would be handwritten on the work order, by the
16. individual who loads the cart, before it is given to the plant
supervisor to be assigned. There is a chance of multiple carts
being needed for the same job, but each cart has its own
individual work order and therefore would have its own three-
digit identification number and light. This is no deviation from
the current process. The assembly workers would walk to the
plant control office, retrieve their next job from the bin, type the
three-digit code into the keypad, and then find the cart that has
the strobe light turned on. This process would eliminate all of
the guessing currently required to locate the cart with the raw
materials and should reduce the overall average time needed to
locate a cart. This would also allow remote storage of the carts,
rather than stacking as many as 30 carts at the top of the
assembly line, a hindrance to traffic flow and safety. 1. Identify
waste in the current production process. 2. How does the pager
suggestion eliminate waste? 3. Have the students and Mr.
Alvarez found the root cause of the cart problem? Why or why
not? 4. How would you apply the principles of lean production
to improve Wiley’s situation?
==============================================
ISCOM 305 Week 1 Assignment Importance of
Operation
FOR MORE CLASSES VISIT
17. www.iscom305tutorials.com
ISCOM 305 Week 1 Assignment Importance of Operation
==============================================
ISCOM 305 Week 1 DQ 1
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
What is the transformation process?
Can the transformation process be applied to both goods and
services?
How might data be used during the process?
==============================================
ISCOM 305 Week 2 Assignment Impact of product
Design
FOR MORE CLASSES VISIT
18. www.iscom305tutorials.com
ISCOM/305 - SYSTEMS OPERATIONS MANAGEMENT
Write a 1,050 to 1,400-word paper in which you describe the
impact of product design on operations and supply chain
strategy. Include the following: • Explain the importance of the
product design process. • Describe the connection of
designing new products and their relationships to production
processes. • Evaluate strategic options in process planning,
including whether or not to outsource. • Articulate the
differences between products and services. Format your paper
consistent with APA guidelines.
==============================================
ISCOM 305 Week 2 DQ 1
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
What are the different types of inventories maintained by a
typical business entity?
19. What is the significance of inventory regarding customer service
levels?
What are some of your experiences with inventories from the
customer service perspective?
How would you improve those inventories?
==============================================
ISCOM 305 Week 3 CASE PROBLEM 10 1 Somerset
Furniture Companys Global Supply Chain
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
CASE PROBLEM 10.1: Somerset Furniture Company’s Global
Supply Chain ISCOM/305 - SYSTEMS OPERATIONS
MANAGEMENT Read Case Problem 10.1 at the end of Chapter
10: Somerset Furniture Company's Global Supply Chain Write a
1,050- to 1,400-word paper in which you address the following
questions: • Discuss Somerset's global supply chain and
possible remedies for its supply chain problems. •Including
strategic and tactical changes that might improve the company's
supply chain performance, reduce system variability, and
improve quality and customer service. •Explain how Somerset
20. could use elements of project management to help them
implement the changes needed.
==============================================
ISCOM 305 Week 3 DQ 1
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
A number of quality-management philosophies hold that
prevention costs are the most critical quality-related costs. What
is the logic behind this premise?
Would you apply this logic as an operations manager? Explain
why or why not.
==============================================
ISCOM 305 Week 3 DQ 2
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
21. What is quality management?
Why is it important for every manager to understand?
How might a quality-management program affect productivity?
==============================================
ISCOM 305 Week 3 DQ 3
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
What are the major elements of project management?
Describe the role of the project manager in conjunction with
project control.
What are the requisite skills that the project manager must
possess?
==============================================
ISCOM 305 Week 3 Supply Chain Strategy and Project
Plan
FOR MORE CLASSES VISIT
22. www.iscom305tutorials.com
ISCOM/305 Write a 700- to 1,050-word paper in which you
explain your supply chain strategy to include the use of global
suppliers. You will also develop a high-level project plan for the
your development project, to include project scope and objects,
schedule with milestones, risks and mitigation plans. Describe
the key characteristics and management strategies for your
supply chain. Summarize your sourcing plan and your rationale
to include international suppliers. Explain your project
management approach and include: Project scope and objects
High-level schedule with milestones Risks and mitigation plans
Format your paper consistent with APA guidelines.
==============================================
ISCOM 305 Week 4 Chapter Questions
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
12-1. List some of the operations and functions in a company
that are dependent on a forecast for product demand. 12-2. What
is the difference between quantitative forecast methods and
23. qualitative forecast methods? 12-3. Describe the difference
between short- and long-range forecasts. 12-4. Discuss the role
of forecasting in supply chain management. 13-1.Describe the
difference between independent and dependent demand and give
an example of each for a pizza restaurant such as Domino’s or
Pizza Hut. 13-2.Distinguish between a fixed-order-quantity
system and fixed-time-period system and give an example of
each. 13-3.Discuss customer service level for an inventory
system within the context of quality management. 14-1.What is
the purpose of sales and operations planning? Describe the
S&OP process. 14-2.List several alternatives for adjusting
capacity. List several alternatives for managing demand. 14-
3.Describe the output of aggregate planning. When is aggregate
planning most useful?
==============================================
ISCOM 305 Week 4 DQ 1
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
How might materials requirement planning (MRP) is applied to
the surgery suite of a hospital, scheduling university classes, a
chain of restaurants, and hotel renovations?
24. ==============================================
ISCOM 305 Week 4 DQ 2
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
What are the strategic goals of supply chain management and
how does procurement, transportation, and distribution affect
these goals?
==============================================
ISCOM 305 Week 4 DQ 3
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
Where have you seen the operational components of planning,
sourcing, making, and delivering applied inappropriately?
==============================================
25. ISCOM 305 Week 5 DQ 1
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
What are three of the primary obstacles encountered by the
management team in adopting and installing a new information
technology system?
==============================================
ISCOM 305 Week 5 DQ 2
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
We have seen many changes and innovations in the application
of technology to operations management in recent years. Using
information from your readings, identify the three most
significant advancements in technology. Explain your choice of
significant advancements.
26. ==============================================
ISCOM 305 Week 5 DQ 3
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
Financial justification of a new information technology system
is difficult at best because many of the advantages are
intangible. Routine capital budgeting often overlooks six areas
of cost savings or revenue-enhancement factors that are realized
with new technology. What are four of these factors? Why are
these factors important?
==============================================
ISCOM 305 Week 5 New Product Launch Plan (Kohls
and Dewalt)
FOR MORE CLASSES VISIT
www.iscom305tutorials.com
27. Prepare a 10- to 15-slide PowerPoint® presentation with speaker
notes of your New Product Introduction Plan. You will simulate
presenting your plan to the senior executive of your company.
Include the following: • Your materials requirements and
resource planning strategy • How you will integrate Lean
Systems into operations and supply chain • Final
recommendation Format your presentation consistent with APA
guidelines.
==============================================