Developing a web or mobile application takes a lot of effort, but all that effort can go down the drain quickly if you improperly load test the application or completely skip testing. Load testing applications is important and a necessary step in the pre-production stage.
New applications, ones that have not yet made it to the production stage, likely don’t have a performance benchmark established. You don’t typically know what to expect with a new app, which is why before you do a larger load test on any application you first do some baseline testing. This will allow you to establish some benchmarks and pick out any performance issues before you place a larger load on the app. For example, if your app crashes with just five users, you have a problem. Look to the application architects to determine if any service level agreements have been set for the application during design.
Once you have done some baseline testing you are ready to load test your application to determine its performance levels under heavier load. Here are 5 essential tips for starting load testing on an application.
8 Blind Spots Often Overlooked When Testing on MobileNeotys
You don’t want to overlook anything when it comes to mobile performance testing. So in order to save you from the pain of missing those little things, we’ve put together a SlideShare guide highlighting eight testing blind spots. Use it as a checklist – you may even want to print it out and keep it on your fridge.
Translating Tester-Speak Into Plain English: Simple Explanations for 8 Testin...Neotys
The software testing industry's buzzwords can be hard to decipher at times, especially when trying to explain these buzzwords to fellow co-workers within your organization who don't really have a clue what you're talking about. Buzzwords are unavoidable, however, there needs to be a clear understanding of what a buzzword is and the testing buzzwords you should know.
The complete guide for negative testing | David TzemachDavid Tzemach
OVERVIEW
SO WHAT IS “NEGATIVE” TESTING ANYWAY?
GOALS OF NEGATIVE TESTING
NEGATIVE TESTING PROCESS
ADVANTAGES OF NEGATIVE TESTING
WHEN TO STOP NEGATIVE TESTING?
Why you cannot ignore negative testing?
Testing is a prolonged process and with the increasing demand, enterprises have started depending on it for their daily functioning's. Creating a perfect application with error free codes is seldom easy. Here are a few common mistakes that programmers make during the testing automation process along with tips to avoid them.
Developing a web or mobile application takes a lot of effort, but all that effort can go down the drain quickly if you improperly load test the application or completely skip testing. Load testing applications is important and a necessary step in the pre-production stage.
New applications, ones that have not yet made it to the production stage, likely don’t have a performance benchmark established. You don’t typically know what to expect with a new app, which is why before you do a larger load test on any application you first do some baseline testing. This will allow you to establish some benchmarks and pick out any performance issues before you place a larger load on the app. For example, if your app crashes with just five users, you have a problem. Look to the application architects to determine if any service level agreements have been set for the application during design.
Once you have done some baseline testing you are ready to load test your application to determine its performance levels under heavier load. Here are 5 essential tips for starting load testing on an application.
8 Blind Spots Often Overlooked When Testing on MobileNeotys
You don’t want to overlook anything when it comes to mobile performance testing. So in order to save you from the pain of missing those little things, we’ve put together a SlideShare guide highlighting eight testing blind spots. Use it as a checklist – you may even want to print it out and keep it on your fridge.
Translating Tester-Speak Into Plain English: Simple Explanations for 8 Testin...Neotys
The software testing industry's buzzwords can be hard to decipher at times, especially when trying to explain these buzzwords to fellow co-workers within your organization who don't really have a clue what you're talking about. Buzzwords are unavoidable, however, there needs to be a clear understanding of what a buzzword is and the testing buzzwords you should know.
The complete guide for negative testing | David TzemachDavid Tzemach
OVERVIEW
SO WHAT IS “NEGATIVE” TESTING ANYWAY?
GOALS OF NEGATIVE TESTING
NEGATIVE TESTING PROCESS
ADVANTAGES OF NEGATIVE TESTING
WHEN TO STOP NEGATIVE TESTING?
Why you cannot ignore negative testing?
Testing is a prolonged process and with the increasing demand, enterprises have started depending on it for their daily functioning's. Creating a perfect application with error free codes is seldom easy. Here are a few common mistakes that programmers make during the testing automation process along with tips to avoid them.
This talk is a brief overview of how we deal with UI test architecture on our project. Complex backend, SPA as a frontend, 20+ different brands and 100+ features for each, more and more code.
We will discuss:
– fakes and test doubles, approaches how to build and maintain them;
– development patterns, which help you to make your architecture more simple, stable and readable;
– tips and tricks – how to make your life with UI tests easier.
In this presentation a brief justification to performance testing will be given following with some terminology and a short demo
links is provided to some recommended solutions trails /freemium
in the comments, the two demo sessions,
TruClient Lite scripting demo
StormRunner Load simple performance test
Easy Continuous Deployment You Can Trust (Webinar)Sauce Labs
In this webinar, you will learn how to build a continuous deployment release process by using Solano CI, Sauce Labs, and AWS CodePipeline. The release process will be gated by smoke, unit, integration and browser tests to guarantee issue-free deployments.
Sharing (less) Pain of using Protractor & WebDriverAnand Bagmar
Slides from my talk in Selenium Conference London 2016 about "Sharing (Less) Pain with Protractor & Selenium WebDriver"
See blog for more information - http://essenceoftesting.blogspot.com/2016/11/shared-relatively-less-pain-of-using.html
My blog: https://essenceoftesting.blogspot.com
Awesome Test Automation Made Simple w/ Dave HaeffnerSauce Labs
Learn how to build simple and powerful automated tests that will work on the browsers you care about, cover visual testing and functional regressions, and be configured to run automatically through the use of a continuous integration (CI) server.
Myth vs Reality: Understanding AI/ML for QA Automation - w/ Jonathan LippsApplitools
** Full webinar recording -- https://youtu.be/ihpAsmRtGuM **
Artificial Intelligence and Machine Learning (AI/ML) have seen application in a variety of fields, including the automation of QA tasks. But what are they exactly? What distinguishes different instances and applications of AI, for example? What are the horizons of these technologies in the field of QA?
The promise of AI/ML must be understood correctly to be harnessed appropriately. As with any buzzword, many technologies and products are offered under the guise of AI/ML without satisfying the definition. The industry is reforming itself around the promise that AI/ML holds often without a clear understanding of the technical limitations that give the promise its boundaries.
In this webinar, test automation guru Jonathan Lipps gives a detailed overview of the concepts that underpin AI/ML, and discuss their ramifications for the work of QA automation.
In addition to a discussion of AI/ML in general, Jonathan looks at examples from the QA industry. These examples will help give attendees the basic understanding required to cut through the marketing language. so we can clearly evaluate AI/ML solutions, and calibrate expectations about the benefit of AI/ML in QA, both as it stands today and in the future.
Slides from the workshop I conducted on "Client-side Performance Testing".
Abstract of the workshop:
In this workshop, we will see the different dimensions of Performance Testing and Performance Engineering, and focus on Client-side Performance Testing.
Before we get to doing some Client-side Performance Testing activities, we will first understand how to look at client-side performance, and putting that in the context of the product under test. We will see, using a case study, the impact of caching on performance, the good & the bad! We will then experiment with some tools like WebPageTest and Page Speed to understand how to measure client-side performance.
Lastly - just understanding the performance of the product is not sufficient. We will look at how to automate the testing for this activity - using WebPageTest (private instance setup), and experiment with yslow - as a low-cost, programatic alternative to WebPageTest.
Testing Hourglass at Jira Frontend - by Alexey Shpakov, Sr. Developer @ Atlas...Applitools
** Full webinar recording: **
Two leading developers -- from Jira/ Atlassian and Pushpay -- shared their insights, tip, tricks, and best practices on how to maintain quality across the Dev-Test-Release cycle, without losing speed or coverage.
Talk 1: Reducing the Risk of Rapid Development and Continuous Delivery -- by David Corbett (Director of Engineering @ Pushpay)
In this talk, David showed us what goes on under the hood of Pushpay's development cycle.
He also talked about the ways in which Pushpay is empowering Dev and Test teams to be more autonomous, and prompting them to use advanced test automation tools & techniques, such as visual validation, in order to gain confidence in deploying many times each day.
Talk 2: Testing Hourglass at Jira Frontend -- by Alexey Shpakov (Sr. Developer - Jira Frontend @ Atlassian)
We often hear people talk about the testing pyramid.
In Jira Frontend, we talk about testing hourglass -- that means we expect our developers to be responsible for the whole lifecycle of the code -- starting from creating tests and finishing with running a 24/7 on-call.
In this talk, Alexey did a deep-dive into the various types of testing they have in Jira Frontend, and discussed the various tools that allow them to deliver Jira to customers in a low-risk manner.
Slides from workshop conducted at ThoughtWorks, Pune in vodQA, on Sat, 27th August, 2016.
Workshop Facilitators - Anand Bagmar, Smriti Tuteja, Pallipuspa Samal, Rohit Singhal, S Ramalingam, Shilpa G
More information about vodQA, and this workshop can be found from the following links -
https://essenceoftesting.blogspot.com/2016/08/vodqa-pune-less-talk-only-action-agenda.html
https://essenceoftesting.blogspot.com/search/label/vodQA
https://essenceoftesting.blogspot.com/search/label/waat
Reaching for Your Quality Stretch Goals: Testing at Realtor.comKlaus Salchner
A/B Testing
If you are not familiar yet, an introduction to A/B testing and how you can leverage this approach to truly measure customer impact before and after a change. It's a practice highly leveraged in the e-commerce and cloud space to truly measure the impact of a change and be able to iterate through it till you see the desired outcome.
Where in your stack to invest in test automation
This short talk will explain in which layer to invest in test automation and the pros and cons. Too many teams still invest heavily in automated UI testing which then results in large test automation suites once the platform grows while still not being able to catch critical quality issues before they reach customers.
Testing for reliability, resilience and recovery
Your customer experience is also impacted by how reliable your application is. How do you test for reliability. But also how do you build and test for resilience, as guaranteed reliability is unachievable and the closer you get the costlier it becomes. Lastly how do you test for recovery, so once an outage or partial outage happened how to you recover, and how do you prepare for that recovery.
Real Devices or Emulators: Wen to use What for Automated TestingSauce Labs
Join analyst David Gehringer of Dimensional Research and Sauce Labs in a Webinar that covers their recent research into how QA and dev engineers choose to test across emulators and real devices. Also, we’ll show you a demo of the Sauce Labs Real Device Cloud and how you can implement best practices of testing on both emulators and real devices to optimize your time and money.
In agile software development world, we are dealing with many test tasks such as user story testing, exploratory testing, check-list based testing, regression testing, performance testing, security testing in each sprint. Besides these testing activities, one of the test types which is considerably getting crucial is visual regression testing.
Visual regression testing focuses on to check visual contents and animations, page layout, and responsive design of a website/app. Because of the limits of human vision, human-based visual regression testing is generally error-prone and cumbersome. Hence, automation is inevitable. It enables us to run the tests much more precisely in a short time period. Also, it saves us a significant amount of time to deal with other manual test activities in each sprint.
In this talk, we will walk through well-known open-source and commercial solutions for visual test automation. We will learn which technologies they use, what type of visual tests they are suitable for, and their major differences between each other. Besides this overview, we will also make a real-life visual test automation demo by using Selenium, ImageMagick, and AShot.
Don’t Go over the Waterfall: Keep Agile Testing AgileTechWell
All too often an agile iteration resembles a mini-waterfall cycle with developers coding for the duration of the iteration and then throwing code “over the wall” to the test team. This results in the all-too-familiar “test squeeze” with testers often testing code after the iteration has already finished. When testing occurs after an iteration’s end, the agile principle of potentially releasable is violated and negatively impacts the next iteration. To avoid these problems we must ensure that all testing is completed before the end of the iteration. But how can we achieve this? Aaron Barrett explains that the solution lies in the planning and processes that govern the agile team. Learn proven strategies that allow your test teams to move testing back inside the iteration and take back a plan to keep you from going over the waterfall.
Web and load testing with Visual Studio 2010 UltimateAbhimanyu Singhal
Visual Studio 2010 Ultimate also gives you access to advanced web and load testing features that help you ensure that whatever application you are building it is ready for the most demanding uses. The Web and Load testing capabilities of Visual Studio 2010 Ultimate help you ensure that whatever application you are building it is ready for whatever scenarios your organization can envisage taking you one step closer to knowing your application is ready for prime time.
List of 12 best software performance testing toolsJanBask Training
Performance testing refers to the process of analyzing the speed or the usefulness of a computer, a computer network, a software program or a given device.
https://www.janbasktraining.com/business-analyst-training
This talk is a brief overview of how we deal with UI test architecture on our project. Complex backend, SPA as a frontend, 20+ different brands and 100+ features for each, more and more code.
We will discuss:
– fakes and test doubles, approaches how to build and maintain them;
– development patterns, which help you to make your architecture more simple, stable and readable;
– tips and tricks – how to make your life with UI tests easier.
In this presentation a brief justification to performance testing will be given following with some terminology and a short demo
links is provided to some recommended solutions trails /freemium
in the comments, the two demo sessions,
TruClient Lite scripting demo
StormRunner Load simple performance test
Easy Continuous Deployment You Can Trust (Webinar)Sauce Labs
In this webinar, you will learn how to build a continuous deployment release process by using Solano CI, Sauce Labs, and AWS CodePipeline. The release process will be gated by smoke, unit, integration and browser tests to guarantee issue-free deployments.
Sharing (less) Pain of using Protractor & WebDriverAnand Bagmar
Slides from my talk in Selenium Conference London 2016 about "Sharing (Less) Pain with Protractor & Selenium WebDriver"
See blog for more information - http://essenceoftesting.blogspot.com/2016/11/shared-relatively-less-pain-of-using.html
My blog: https://essenceoftesting.blogspot.com
Awesome Test Automation Made Simple w/ Dave HaeffnerSauce Labs
Learn how to build simple and powerful automated tests that will work on the browsers you care about, cover visual testing and functional regressions, and be configured to run automatically through the use of a continuous integration (CI) server.
Myth vs Reality: Understanding AI/ML for QA Automation - w/ Jonathan LippsApplitools
** Full webinar recording -- https://youtu.be/ihpAsmRtGuM **
Artificial Intelligence and Machine Learning (AI/ML) have seen application in a variety of fields, including the automation of QA tasks. But what are they exactly? What distinguishes different instances and applications of AI, for example? What are the horizons of these technologies in the field of QA?
The promise of AI/ML must be understood correctly to be harnessed appropriately. As with any buzzword, many technologies and products are offered under the guise of AI/ML without satisfying the definition. The industry is reforming itself around the promise that AI/ML holds often without a clear understanding of the technical limitations that give the promise its boundaries.
In this webinar, test automation guru Jonathan Lipps gives a detailed overview of the concepts that underpin AI/ML, and discuss their ramifications for the work of QA automation.
In addition to a discussion of AI/ML in general, Jonathan looks at examples from the QA industry. These examples will help give attendees the basic understanding required to cut through the marketing language. so we can clearly evaluate AI/ML solutions, and calibrate expectations about the benefit of AI/ML in QA, both as it stands today and in the future.
Slides from the workshop I conducted on "Client-side Performance Testing".
Abstract of the workshop:
In this workshop, we will see the different dimensions of Performance Testing and Performance Engineering, and focus on Client-side Performance Testing.
Before we get to doing some Client-side Performance Testing activities, we will first understand how to look at client-side performance, and putting that in the context of the product under test. We will see, using a case study, the impact of caching on performance, the good & the bad! We will then experiment with some tools like WebPageTest and Page Speed to understand how to measure client-side performance.
Lastly - just understanding the performance of the product is not sufficient. We will look at how to automate the testing for this activity - using WebPageTest (private instance setup), and experiment with yslow - as a low-cost, programatic alternative to WebPageTest.
Testing Hourglass at Jira Frontend - by Alexey Shpakov, Sr. Developer @ Atlas...Applitools
** Full webinar recording: **
Two leading developers -- from Jira/ Atlassian and Pushpay -- shared their insights, tip, tricks, and best practices on how to maintain quality across the Dev-Test-Release cycle, without losing speed or coverage.
Talk 1: Reducing the Risk of Rapid Development and Continuous Delivery -- by David Corbett (Director of Engineering @ Pushpay)
In this talk, David showed us what goes on under the hood of Pushpay's development cycle.
He also talked about the ways in which Pushpay is empowering Dev and Test teams to be more autonomous, and prompting them to use advanced test automation tools & techniques, such as visual validation, in order to gain confidence in deploying many times each day.
Talk 2: Testing Hourglass at Jira Frontend -- by Alexey Shpakov (Sr. Developer - Jira Frontend @ Atlassian)
We often hear people talk about the testing pyramid.
In Jira Frontend, we talk about testing hourglass -- that means we expect our developers to be responsible for the whole lifecycle of the code -- starting from creating tests and finishing with running a 24/7 on-call.
In this talk, Alexey did a deep-dive into the various types of testing they have in Jira Frontend, and discussed the various tools that allow them to deliver Jira to customers in a low-risk manner.
Slides from workshop conducted at ThoughtWorks, Pune in vodQA, on Sat, 27th August, 2016.
Workshop Facilitators - Anand Bagmar, Smriti Tuteja, Pallipuspa Samal, Rohit Singhal, S Ramalingam, Shilpa G
More information about vodQA, and this workshop can be found from the following links -
https://essenceoftesting.blogspot.com/2016/08/vodqa-pune-less-talk-only-action-agenda.html
https://essenceoftesting.blogspot.com/search/label/vodQA
https://essenceoftesting.blogspot.com/search/label/waat
Reaching for Your Quality Stretch Goals: Testing at Realtor.comKlaus Salchner
A/B Testing
If you are not familiar yet, an introduction to A/B testing and how you can leverage this approach to truly measure customer impact before and after a change. It's a practice highly leveraged in the e-commerce and cloud space to truly measure the impact of a change and be able to iterate through it till you see the desired outcome.
Where in your stack to invest in test automation
This short talk will explain in which layer to invest in test automation and the pros and cons. Too many teams still invest heavily in automated UI testing which then results in large test automation suites once the platform grows while still not being able to catch critical quality issues before they reach customers.
Testing for reliability, resilience and recovery
Your customer experience is also impacted by how reliable your application is. How do you test for reliability. But also how do you build and test for resilience, as guaranteed reliability is unachievable and the closer you get the costlier it becomes. Lastly how do you test for recovery, so once an outage or partial outage happened how to you recover, and how do you prepare for that recovery.
Real Devices or Emulators: Wen to use What for Automated TestingSauce Labs
Join analyst David Gehringer of Dimensional Research and Sauce Labs in a Webinar that covers their recent research into how QA and dev engineers choose to test across emulators and real devices. Also, we’ll show you a demo of the Sauce Labs Real Device Cloud and how you can implement best practices of testing on both emulators and real devices to optimize your time and money.
In agile software development world, we are dealing with many test tasks such as user story testing, exploratory testing, check-list based testing, regression testing, performance testing, security testing in each sprint. Besides these testing activities, one of the test types which is considerably getting crucial is visual regression testing.
Visual regression testing focuses on to check visual contents and animations, page layout, and responsive design of a website/app. Because of the limits of human vision, human-based visual regression testing is generally error-prone and cumbersome. Hence, automation is inevitable. It enables us to run the tests much more precisely in a short time period. Also, it saves us a significant amount of time to deal with other manual test activities in each sprint.
In this talk, we will walk through well-known open-source and commercial solutions for visual test automation. We will learn which technologies they use, what type of visual tests they are suitable for, and their major differences between each other. Besides this overview, we will also make a real-life visual test automation demo by using Selenium, ImageMagick, and AShot.
Don’t Go over the Waterfall: Keep Agile Testing AgileTechWell
All too often an agile iteration resembles a mini-waterfall cycle with developers coding for the duration of the iteration and then throwing code “over the wall” to the test team. This results in the all-too-familiar “test squeeze” with testers often testing code after the iteration has already finished. When testing occurs after an iteration’s end, the agile principle of potentially releasable is violated and negatively impacts the next iteration. To avoid these problems we must ensure that all testing is completed before the end of the iteration. But how can we achieve this? Aaron Barrett explains that the solution lies in the planning and processes that govern the agile team. Learn proven strategies that allow your test teams to move testing back inside the iteration and take back a plan to keep you from going over the waterfall.
Web and load testing with Visual Studio 2010 UltimateAbhimanyu Singhal
Visual Studio 2010 Ultimate also gives you access to advanced web and load testing features that help you ensure that whatever application you are building it is ready for the most demanding uses. The Web and Load testing capabilities of Visual Studio 2010 Ultimate help you ensure that whatever application you are building it is ready for whatever scenarios your organization can envisage taking you one step closer to knowing your application is ready for prime time.
List of 12 best software performance testing toolsJanBask Training
Performance testing refers to the process of analyzing the speed or the usefulness of a computer, a computer network, a software program or a given device.
https://www.janbasktraining.com/business-analyst-training
Top 10 Software Testing Tool to Help You The Most!Harish Chand
Today's software testing tool market offers testers more features in their tool. Let's see top 10 available options and make your own decision on what software testing tools you want to evaluate.
Measure performance of the application using open source performance testing...BugRaptors
Bugraptors know that the performance of any product is key component of that project, to measure the performance of the project we have expert team of performance testers who perform the testing by using various performance testing tools like Jmeter, LoadUI, Selenium web driver and deliver project which has good performance according to the requirements and end user’s perspective.
It gives you an basic over view to start up with Jmeter. This slide encourage you to start from basic terminology in the Performance Testing field. It contains information about Different subcategory of Performance Testing. The main focus is to connect performance testing with Jmeter.
What are the top 10 performance testing toolsTestingXperts
A software product or application’s value is judged in terms of stability, performance, robustness, scalability, speed and reliability. An application may be able to deliver optimal results with 100 users, but the key point is whether the same application can be able to deliver optimal results with 1000 users. Performance testing is conducted to analyze the capability of a software product or application. In this article, you will get to know the top 10 performance testing tools.
https://www.linkedin.com/pulse/what-top-10-performance-testing-tools-william-hruska/
Appurify - Runtime Debugging, Performance Optimization and Automated CIManish Lachwani
Mobile performance optimization, runtime debugging and continuous integration automated testing platform for iOS and Android devices.
Appurify is the EC2 for mobile, 1000's of mobile devices in dedicated/shared clouds both on-premise and off-premise.
Debug you html5, native, hybrid and browsers using Chrome and Safari dev tools.
Simulate network carrier conditions, location, accelerometer, magnetometer, low memory etc.
Client side load time optimization, time to intertact, server side, pcap/har etc.
Анна Горб — преподаватель Компьютерной школы Hillel, Scrum Master/Team Lead в Luxoft
Приобщилась к тестированию в 2007 году в Днепропетровской компании Aquasoft.
За 7 месяцев сделала головокружительную карьеру до QA Lead небольшой группы тестирования.
С 2010 года работает в компании Luxoft. На разных проектах, банковских и не очень.
С 2013 году аттестована как тренер. Любит делиться с людьми своими знаниями и опытом.
Ведет тренинги как по прикладному тестированию, так и по управлению тестированием.
С 2015 года сертифицированный Scrum Master.
Коллекционирует желтеньких резиновых уточек.
** Performance Testing Using JMeter: https://www.edureka.co/jmeter-trainin... **
This edureka PPT on "JMeter vs LoadRunner" will provide you in-depth knowledge about how these two tools are used for performance testing. It will compare the tools based on certain parameters which will help you in deciding the best out of the two.
Introduction to JMeter
Introduction to LoadRunner
Parameters of Comparison
Availability
Load Generation Capacity
Execution
Analysis Report
Open-source & Community
Scripting
Building Test Scenarios
Elements
Software Testing Playlist: http://bit.ly/2uYgRJj
Software Testing Blog Series: http://bit.ly/2B7C3QR
Selenium playlist: https://goo.gl/NmuzXE
Follow us to never miss an update in the future.
YouTube: https://www.youtube.com/user/edurekaIN
Instagram: https://www.instagram.com/edureka_learning/
Facebook: https://www.facebook.com/edurekaIN/
Twitter: https://twitter.com/edurekain
LinkedIn: https://www.linkedin.com/company/edureka
It's a very basic introduction of Load Runner for beginners, i explored it at my own, prepared slides & shared it with my colleagues.
What is Load Runner & why we need Performance testing etc.
Enjoy :)
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Knowledge engineering: from people to machines and back
Introduction to Performance Testing
1.
2. A discipline concerned with detecting
and reporting the current behaviour of
the software system
Technical investigation done to validate
› Responsiveness
› Speed
› Scalability
› Stability of the product
3.
4. Prevents software to suffer from
› Running slow while several users use it
simultaneously.
› Inconsistency
› Poor usability
8. HP Loadrunner
capable of simulating hundreds of
thousands of users, putting applications
under real life loads to determine their
behaviour under expected loads.
9. Apache Jmeter
open source software, a 100% pure Java
application designed to load test
functional behaviour and measure
performance. Apache JMeter may be
used to test performance both on static
and dynamic resources (Files, Web
dynamic languages – PHP, Java,
ASP.NET, etc.
10. Feel free to post it on our website:
http://iamgopikrishna.wordpress.com
11. For more information in detail, go
through the following website :
› http://iamgopikrishna.wordpress.com/2014/06/10/introdu
ction-to-performance-testing/