Infrared spectroscopy- Spectra intrepretation.pptx
•
0 likes•8 views
Infrared spectroscopy is a technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid or gas. The infrared spectrum shows the molecular absorption and transmission peaks of a sample with different frequencies of infrared light. Infrared spectroscopy allows the identification of unknown materials through comparison of spectral bands or peaks of molecules to a reference chart.
Report
Share
Report
Share
Recommended
UV-Woodward Fischer Rules.pptx
The document discusses rules related to the UV-Woodward Fischer reaction. This chemical reaction involves the addition of an unsaturated carbon-carbon bond across a carbonyl group. The rules outline the factors that determine the stereochemistry of products from this reaction.
UV
The document discusses methods for determining the chemical structure of an unknown compound through elucidation. Elucidation can be used to identify drug metabolites, drug candidates, and process impurities. It involves using chemical methods like functional group testing and chemical transformations as well as physical measurements of properties and spectroscopy. Different electromagnetic radiations interact with matter in various ways and using radiations of different energies provides different information that can be used to elucidate chemical compounds.
Infrared Spectrometry-Introduction.pptx
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
BASICS OF uv.pptx
The document discusses four key factors that can affect UV-Vis absorption by organic compounds: solvent, concentration, pH, and temperature of the sample. The solvent, sample concentration, pH, and temperature can all influence the position and intensity of absorption peaks. It is important for analysts to control these parameters to obtain accurate, precise, and valid quantitative results by using standardized sample preparation and measurement conditions.
POTENTIOMTRY.ppt
Potentiometric titration is a chemical analysis technique that relies on measuring the electromotive force (EMF) of a solution using indicator and reference electrodes. The EMF depends on the ions present in the solution. During titration, the EMF is measured after each addition of titrant and graphed versus volume added. There are four main types of potentiometric titration: acid-base titration determines concentration by neutralization, redox titration involves a redox reaction, complexometric titration forms colored complexes, and precipitation titration forms an insoluble precipitate.
Electrodes and Potentiometry.ppt
This document discusses electrodes and potentiometry. It introduces potentiometry as using electrodes to measure voltages that provide chemical information. A galvanic cell is used, with an indicator electrode that responds to the analyte and a reference electrode at a constant potential. The cell voltage is the difference between the electrodes. Common reference electrodes include silver-silver chloride and saturated calomel electrodes. Indicator electrodes can be metal electrodes that undergo redox reactions or ion-selective electrodes that selectively bind ions. Glass electrodes are commonly used for pH measurements. Sources of error in pH and other ion-selective electrode measurements are also discussed.
PRIMARY AND SECONDARY.pptx
Standards are used to determine the concentration of unknown substances. Primary standards are highly pure, stable chemicals that serve as the original reference material. Secondary standards have lower purity than primary standards but can be used by smaller labs after being standardized against a primary standard, serving as an external quality control. Primary standards are the original calibrators due to their high purity, stability, and other ideal properties.
Recommended
UV-Woodward Fischer Rules.pptx
The document discusses rules related to the UV-Woodward Fischer reaction. This chemical reaction involves the addition of an unsaturated carbon-carbon bond across a carbonyl group. The rules outline the factors that determine the stereochemistry of products from this reaction.
UV
The document discusses methods for determining the chemical structure of an unknown compound through elucidation. Elucidation can be used to identify drug metabolites, drug candidates, and process impurities. It involves using chemical methods like functional group testing and chemical transformations as well as physical measurements of properties and spectroscopy. Different electromagnetic radiations interact with matter in various ways and using radiations of different energies provides different information that can be used to elucidate chemical compounds.
Infrared Spectrometry-Introduction.pptx
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
BASICS OF uv.pptx
The document discusses four key factors that can affect UV-Vis absorption by organic compounds: solvent, concentration, pH, and temperature of the sample. The solvent, sample concentration, pH, and temperature can all influence the position and intensity of absorption peaks. It is important for analysts to control these parameters to obtain accurate, precise, and valid quantitative results by using standardized sample preparation and measurement conditions.
POTENTIOMTRY.ppt
Potentiometric titration is a chemical analysis technique that relies on measuring the electromotive force (EMF) of a solution using indicator and reference electrodes. The EMF depends on the ions present in the solution. During titration, the EMF is measured after each addition of titrant and graphed versus volume added. There are four main types of potentiometric titration: acid-base titration determines concentration by neutralization, redox titration involves a redox reaction, complexometric titration forms colored complexes, and precipitation titration forms an insoluble precipitate.
Electrodes and Potentiometry.ppt
This document discusses electrodes and potentiometry. It introduces potentiometry as using electrodes to measure voltages that provide chemical information. A galvanic cell is used, with an indicator electrode that responds to the analyte and a reference electrode at a constant potential. The cell voltage is the difference between the electrodes. Common reference electrodes include silver-silver chloride and saturated calomel electrodes. Indicator electrodes can be metal electrodes that undergo redox reactions or ion-selective electrodes that selectively bind ions. Glass electrodes are commonly used for pH measurements. Sources of error in pH and other ion-selective electrode measurements are also discussed.
PRIMARY AND SECONDARY.pptx
Standards are used to determine the concentration of unknown substances. Primary standards are highly pure, stable chemicals that serve as the original reference material. Secondary standards have lower purity than primary standards but can be used by smaller labs after being standardized against a primary standard, serving as an external quality control. Primary standards are the original calibrators due to their high purity, stability, and other ideal properties.
Introduction to Analytical Chemistry.pptx
Analytical chemistry involves the separation, identification, and quantification of substances using both classical and instrumental methods. It separates chemical species from mixtures, identifies analytes through qualitative analysis, and determines analyte concentrations through quantitative analysis. Common techniques include spectroscopy, mass spectroscopy, electrochemical analysis, calorimetry, and titration. Analytical chemistry has important applications in fields like medicine, forensics, food testing, and environmental analysis.
Electrophoresis.pptx
Electrophoresis is a technique that uses an electric field to separate biomolecules like proteins, nucleic acids, and amino acids based on their size, charge, and shape. During electrophoresis, molecules move through a substrate or matrix toward the electrode of opposite charge - positively charged molecules move toward the negative electrode (anode) and negatively charged molecules move toward the positive electrode (cathode). Common electrophoresis methods include paper, cellulose acetate, capillary, and gel electrophoresis, with gel electrophoresis being the most widely used. Gel electrophoresis separates molecules based on their size as they migrate through a gel matrix under an applied electric field.
Affinity chromatography.pptx
Affinity chromatography is a method to separate biochemical mixtures based on highly specific interactions like antigen-antibody binding. It works by attaching one molecule from the interaction to a stationary phase, then allowing the mixture to pass through. The interacting molecule will bind to the stationary phase while other molecules pass through. The bound molecule can then be eluted and collected. It is commonly used to purify proteins, antibodies, enzymes, and other biological compounds.
PROBLEMS WITH TLC.pptx
The document discusses problems with the ride-sharing service TLC. It first addresses issues with determining the position of vehicles picking up passengers. Second, it notes concerns about ensuring the safety of passengers. Third, the summary suggests improvements are needed to provide reliable and secure transportation.
Good Documentation Practice.pptx
Documentation is essential for pharmacies to operate effectively and ensure patient safety. Good documentation includes accurate, complete, and timely records of all relevant information such as patient health histories, prescribed medications, and treatment plans. Quality management through documentation helps pharmacies comply with standards and improve processes.
IR.ppt
Infrared spectroscopy depends on the vibrational and rotational energy levels of molecules. The frequency of infrared light absorbed is determined by the masses of bonded atoms and the bond strength. IR absorption peaks provide information about molecular structure through functional groups. Selection rules limit transitions between energy levels to certain vibrational changes. Anharmonicity and vibrational coupling affect peak positions and intensities. IR spectroscopy is used to study molecular vibrations and identify chemical structures and compounds.
Medicinal Gases.pptx
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
METHODS OF IONIZATION-MASS.pptx
There are several methods of ionization that can be used in mass spectrometry. Chemical ionization uses reagent ions to react with analyte molecules and form ions through proton or hydride transfer. Electron impact ionization uses an electron beam to knock electrons off analyte molecules, creating ions. Electrospray ionization sprays a sample solution to form charged droplets that evaporate and leave behind highly charged analyte molecules. Matrix-assisted laser desorption ionization disperses biological molecules in a solid matrix and uses a laser to carry the ionized molecules into the gas phase for analysis.
Essential Trace elements.pptx
Trace elements, also known as micronutrients, are nutrients that are needed by the human body in very small amounts for good health. Examples of trace elements include iron, zinc, copper, selenium, iodine, chromium, manganese, molybdenum, and fluoride. While only small amounts are needed, trace elements are still important for many vital functions in the body such as growth and development, energy production, and disease prevention.
antacid.ppt
This document discusses antacids and acid-base chemistry. It defines acids and bases using Arrhenius, Bronsted-Lowry, and Lewis theories. It explains how water dissociates to form hydronium and hydroxide ions. Antacids work by neutralizing excess stomach acid through acid-base reactions. Common antacids use calcium carbonate, magnesium hydroxide, aluminum hydroxide, and sodium bicarbonate. Titration can be used to determine the concentration of an unknown acid or base solution and the effectiveness of antacids is quantified through titration experiments.
Theory of Indicators.pptx
1. Indicators are substances that change color in response to chemical reactions, especially titrations, allowing the determination of an endpoint.
2. There are three types of indicators: self-indicators that change color on their own, internal indicators that participate in the reaction, and external indicators that do not participate but still change color at the endpoint.
3. Indicator color changes are explained by two theories: Ostwald's theory of ionization states that indicators are weak acids or bases whose color depends on whether they are ionized or not. The quinonoid theory proposes that indicators exist in colored or colorless tautomeric forms that interchange depending on pH.
Thermogravimetry
DSC and DTA are thermoanalytical techniques used to study materials through temperature changes. DSC measures the heat flow required to keep a sample and reference at the same temperature, while DTA measures the temperature difference between them when the same heat flow is applied to both. The main difference is that DSC focuses on heat flow and DTA focuses on temperature difference. Both provide important details about a material's chemical and physical properties during phase transitions or other thermal processes.
Xrd
The reciprocal lattice is an array of points where each point corresponds to a plane in the crystal lattice. Each plane in the crystal lattice is represented by a point in the reciprocal lattice located a distance dhkl from the center O. The diffraction vector g(hkl) relates the distance of a point in the reciprocal lattice from the center to the corresponding plane in the crystal lattice. The reciprocal lattice and diffraction patterns are related, and this relationship is used to interpret different diffraction patterns using concepts like the Ewald sphere.
Precipitation titrations e content
Precipitation titrations involve the titration of an analyte with a reagent to form an insoluble precipitate. The most common precipitation reaction used is between silver ions and various anions like chloride, bromide, and iodide. Argentometric titrations, which use silver, are based on the rapid and reproducible reaction of silver salts. Mohr's method directly titrates halide ions with silver nitrate using potassium chromate as an indicator, which forms a brick red silver chromate precipitate at the endpoint. Fajan's method uses organic indicators that adsorb onto the surface of the precipitating silver salt, changing color at the endpoint.
Precipitation titrations e content
Precipitation titrations involve the titration of an analyte with a reagent to form an insoluble precipitate. The most common precipitation reaction used is between silver ions and chloride, bromide, iodide or thiocyanate ions. This type of titration is called an argentometric titration. Common methods for argentometric titrations include Mohr's method, which uses potassium chromate as an indicator, and Fajan's method, which uses an adsorption indicator that changes color when it adsorbs onto the precipitate surface at the endpoint.
Ir instrumentation
A single beam spectrometer measures the light transmitted through samples one at a time. It first adjusts to read zero transmittance without light, then 100% transmittance with light. Samples are then measured and the absorbance read, maintaining the same light source and detector settings. Dispersive IR spectrometers have sample compartments before the monochromator to reduce stray light. Radiation sources include thermal sources like tungsten filament lamps and electric discharge sources like deuterium and mercury lamps. Monochromators like prisms and gratings disperse radiation by wavelength. Cuvettes to hold samples are usually made of quartz, glass or plastic. Common detectors include phototubes, photomulti
Uv and Visibal Spectroscopy-Introduction
1. Ultraviolet and Visible Spectrophotometry is a technique used to characterize the absorption, transmission, and reflectivity of compounds and materials using different regions of the electromagnetic spectrum.
2. When molecules absorb energy from electromagnetic radiation, they can undergo translational, rotational, or vibrational motion or ionization depending on the frequency, and then quickly drop down to the ground state emitting energy.
3. UV-VIS spectroscopy is useful for identifying and quantitatively measuring samples, with broad spectral features and absorption corresponding to electronic transitions of π, σ, n, charge transfer, and d and f electrons.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience Wahiba Chair Training & Consulting
Wahiba Chair's Talk at the 2024 Learning Ideas Conference. More Related Content
More from Meenakshi Dhanawat
Introduction to Analytical Chemistry.pptx
Analytical chemistry involves the separation, identification, and quantification of substances using both classical and instrumental methods. It separates chemical species from mixtures, identifies analytes through qualitative analysis, and determines analyte concentrations through quantitative analysis. Common techniques include spectroscopy, mass spectroscopy, electrochemical analysis, calorimetry, and titration. Analytical chemistry has important applications in fields like medicine, forensics, food testing, and environmental analysis.
Electrophoresis.pptx
Electrophoresis is a technique that uses an electric field to separate biomolecules like proteins, nucleic acids, and amino acids based on their size, charge, and shape. During electrophoresis, molecules move through a substrate or matrix toward the electrode of opposite charge - positively charged molecules move toward the negative electrode (anode) and negatively charged molecules move toward the positive electrode (cathode). Common electrophoresis methods include paper, cellulose acetate, capillary, and gel electrophoresis, with gel electrophoresis being the most widely used. Gel electrophoresis separates molecules based on their size as they migrate through a gel matrix under an applied electric field.
Affinity chromatography.pptx
Affinity chromatography is a method to separate biochemical mixtures based on highly specific interactions like antigen-antibody binding. It works by attaching one molecule from the interaction to a stationary phase, then allowing the mixture to pass through. The interacting molecule will bind to the stationary phase while other molecules pass through. The bound molecule can then be eluted and collected. It is commonly used to purify proteins, antibodies, enzymes, and other biological compounds.
PROBLEMS WITH TLC.pptx
The document discusses problems with the ride-sharing service TLC. It first addresses issues with determining the position of vehicles picking up passengers. Second, it notes concerns about ensuring the safety of passengers. Third, the summary suggests improvements are needed to provide reliable and secure transportation.
Good Documentation Practice.pptx
Documentation is essential for pharmacies to operate effectively and ensure patient safety. Good documentation includes accurate, complete, and timely records of all relevant information such as patient health histories, prescribed medications, and treatment plans. Quality management through documentation helps pharmacies comply with standards and improve processes.
IR.ppt
Infrared spectroscopy depends on the vibrational and rotational energy levels of molecules. The frequency of infrared light absorbed is determined by the masses of bonded atoms and the bond strength. IR absorption peaks provide information about molecular structure through functional groups. Selection rules limit transitions between energy levels to certain vibrational changes. Anharmonicity and vibrational coupling affect peak positions and intensities. IR spectroscopy is used to study molecular vibrations and identify chemical structures and compounds.
Medicinal Gases.pptx
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
METHODS OF IONIZATION-MASS.pptx
There are several methods of ionization that can be used in mass spectrometry. Chemical ionization uses reagent ions to react with analyte molecules and form ions through proton or hydride transfer. Electron impact ionization uses an electron beam to knock electrons off analyte molecules, creating ions. Electrospray ionization sprays a sample solution to form charged droplets that evaporate and leave behind highly charged analyte molecules. Matrix-assisted laser desorption ionization disperses biological molecules in a solid matrix and uses a laser to carry the ionized molecules into the gas phase for analysis.
Essential Trace elements.pptx
Trace elements, also known as micronutrients, are nutrients that are needed by the human body in very small amounts for good health. Examples of trace elements include iron, zinc, copper, selenium, iodine, chromium, manganese, molybdenum, and fluoride. While only small amounts are needed, trace elements are still important for many vital functions in the body such as growth and development, energy production, and disease prevention.
antacid.ppt
This document discusses antacids and acid-base chemistry. It defines acids and bases using Arrhenius, Bronsted-Lowry, and Lewis theories. It explains how water dissociates to form hydronium and hydroxide ions. Antacids work by neutralizing excess stomach acid through acid-base reactions. Common antacids use calcium carbonate, magnesium hydroxide, aluminum hydroxide, and sodium bicarbonate. Titration can be used to determine the concentration of an unknown acid or base solution and the effectiveness of antacids is quantified through titration experiments.
Theory of Indicators.pptx
1. Indicators are substances that change color in response to chemical reactions, especially titrations, allowing the determination of an endpoint.
2. There are three types of indicators: self-indicators that change color on their own, internal indicators that participate in the reaction, and external indicators that do not participate but still change color at the endpoint.
3. Indicator color changes are explained by two theories: Ostwald's theory of ionization states that indicators are weak acids or bases whose color depends on whether they are ionized or not. The quinonoid theory proposes that indicators exist in colored or colorless tautomeric forms that interchange depending on pH.
Thermogravimetry
DSC and DTA are thermoanalytical techniques used to study materials through temperature changes. DSC measures the heat flow required to keep a sample and reference at the same temperature, while DTA measures the temperature difference between them when the same heat flow is applied to both. The main difference is that DSC focuses on heat flow and DTA focuses on temperature difference. Both provide important details about a material's chemical and physical properties during phase transitions or other thermal processes.
Xrd
The reciprocal lattice is an array of points where each point corresponds to a plane in the crystal lattice. Each plane in the crystal lattice is represented by a point in the reciprocal lattice located a distance dhkl from the center O. The diffraction vector g(hkl) relates the distance of a point in the reciprocal lattice from the center to the corresponding plane in the crystal lattice. The reciprocal lattice and diffraction patterns are related, and this relationship is used to interpret different diffraction patterns using concepts like the Ewald sphere.
Precipitation titrations e content
Precipitation titrations involve the titration of an analyte with a reagent to form an insoluble precipitate. The most common precipitation reaction used is between silver ions and various anions like chloride, bromide, and iodide. Argentometric titrations, which use silver, are based on the rapid and reproducible reaction of silver salts. Mohr's method directly titrates halide ions with silver nitrate using potassium chromate as an indicator, which forms a brick red silver chromate precipitate at the endpoint. Fajan's method uses organic indicators that adsorb onto the surface of the precipitating silver salt, changing color at the endpoint.
Precipitation titrations e content
Precipitation titrations involve the titration of an analyte with a reagent to form an insoluble precipitate. The most common precipitation reaction used is between silver ions and chloride, bromide, iodide or thiocyanate ions. This type of titration is called an argentometric titration. Common methods for argentometric titrations include Mohr's method, which uses potassium chromate as an indicator, and Fajan's method, which uses an adsorption indicator that changes color when it adsorbs onto the precipitate surface at the endpoint.
Ir instrumentation
A single beam spectrometer measures the light transmitted through samples one at a time. It first adjusts to read zero transmittance without light, then 100% transmittance with light. Samples are then measured and the absorbance read, maintaining the same light source and detector settings. Dispersive IR spectrometers have sample compartments before the monochromator to reduce stray light. Radiation sources include thermal sources like tungsten filament lamps and electric discharge sources like deuterium and mercury lamps. Monochromators like prisms and gratings disperse radiation by wavelength. Cuvettes to hold samples are usually made of quartz, glass or plastic. Common detectors include phototubes, photomulti
Uv and Visibal Spectroscopy-Introduction
1. Ultraviolet and Visible Spectrophotometry is a technique used to characterize the absorption, transmission, and reflectivity of compounds and materials using different regions of the electromagnetic spectrum.
2. When molecules absorb energy from electromagnetic radiation, they can undergo translational, rotational, or vibrational motion or ionization depending on the frequency, and then quickly drop down to the ground state emitting energy.
3. UV-VIS spectroscopy is useful for identifying and quantitatively measuring samples, with broad spectral features and absorption corresponding to electronic transitions of π, σ, n, charge transfer, and d and f electrons.
More from Meenakshi Dhanawat (17)
Recently uploaded
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience Wahiba Chair Training & Consulting
Wahiba Chair's Talk at the 2024 Learning Ideas Conference. Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdBeyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneRHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
Recently uploaded (20)
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students