India Warehousing is a real estate portal specializing in industrial properties like warehouses, factories, and godowns. They offer pre-engineered steel buildings manufactured using prefabricated steel components for flexible and durable construction. As a pre-engineered building manufacturer, they provide steel structures with primary and secondary members connected by sheeting. Key parameters in their pre-engineered building designs include length, height, roof slope, and accounting for design loads. They offer roofing and wall panel systems in galvalume or galvanized steel.

1. INDIA WAREHOUSING
Pre Engineered Buildings (PEB) Manufacturer

2. INDIA WAREHOUSING
 India Warehousing is a unique Real estate portal of Industrial properties
available for sale or rent. We offer real estate services Industrial Lands,
Industrial Plot, Industrial Units, warehouses, godowns or any other
Industrial Properties. Our expert team have domain expertise and core
knowledge of industrial properties which make us differ from typical real
estate broker or agency.

3. PRE ENGINEERED BUILDINGS (PEB) MANUFACTURER
 Pre Engineered Building (PEB) is a steel structure built over a
structural concept of primary members, secondary members, and the
cover sheeting connected to each other. The structural members are
custom designed to be lighter in weight as well as high in strength.
 Today and in the future, Steel (PEB) has become the material of
choice in building construction, compared to concrete and timber.
Thus steel building designs (Pre Engineered Steel Buildings) have
become more flexible, durable and adaptable.

4. PRE ENGINEERED STEEL BUILDINGS (PEB)MANUFACTURER
 Pre Engineered Steel Buildings (PEB) revolutionized the construction
market using built-ups in place of conventional Hot Rolled Sections. Pre e
Engineered Steel Buildings can be fitted with different structural additions
like trusses, mezzanine floors, fascias, canopies and crane systems as per
user requirements.
 PEB buildings ( Pre Engineered Steel Buildings) are used for diverse
applications such as factories, warehouses, offices, shopping malls,
schools, hospitals, community buildings and several more.

5. BASIC PARAMETERS OF PRE ENGINEERED BUILDINGS
 Building Length : The PEB length between the outside from flanges of
end wall columns in opposite end walls is considered the building
length.
 Building Height : The PEB Building height is the eave height which
usually is the distance from the bottom of the main frame PEB (Pre
Engineered Steel Buildings) column base plate to the top outer point of
the eave strut. When columns are recessed or elevated from finished
floor, eave height is the distance from finished floor level to top of eave
strut.
 Roof Slope : ( The PEB Pre Engineered Building Systems) This is the
angle of roof with respect to the Horizontal. The most common roof
slopes are 1/10 and 1/20. Though any practical roof slope is possible as
per customer’s requirement.

6. DESIGN LOADS
 Design for snow loads, Seismic loads, collateral loads, or any other
local climatic condition must be specified at the time of quotation.
 Design Wind Speed
 It is calculated as per location.
Intermediate Frame : Rafter
Intermediate Frame : Column
Bearing Frame : Rafter
Bearing Frame : Corner column
Endwall column
Tie rods for wind bracing
Purlins
Wind bracing
Strut purlin for wind bracing
Eave struct
Rake angle in PEB Building
Girts
Roof panels
Wall panels
Blanket insulation
Foam Filler
Inside gutter
Valley gutter
Ridg event
Turbovent
Sectional door
Single door
Window
Monitor
Canopy
Parapet, Sidewall
Parapet, endwall
Crane runway
Bridge crone
Mezzanine
Skylight

7. ROOFING & WALL PANEL AND WALL CLADDING SYSTEM HI-RIB
 HI-RIB roof & wall cladding systems is available in the following base
material in standard execution. Galvalume high tensile cold rolled steel
as per AS-1397 standard coating class (AZ150gsm/m2) zinc-aluminum
alloy coating mass, total of both sides, 550 MPA yield strength
confirming to AS-1397 standard. Galvanized steel as per IS:277
(Z275gms/m2 zinc coating mass/245 MPa yield strength ).
 Tolerance : Length : ±0-10 mm, Cover
 Width : ± 6mm
 Packing : In strapped bundles (one ton max)
 Length : Custom Size 1000 – 1200 mm

8. CONTACT US
 Call:+91 95103 95103 / 95101 95101
 Email: products@indiawarehousing.in
 Address:
 A/1103, Prerna Shikhar Towers
 Nr. Bodakdev Fire Station,
 Bh. Pride Hotel,
 Off. Judges Bungalow Road,
 Bodakdev, Ahmedabad - Gujarat,
 India – 380054
Website:-www.indiawarehousing.in