Independant Assessment of APIC's MicroATX RFoF Link by Aselsan Electronic Industries Inc.
•Download as PPT, PDF•
0 likes•89 views
Aselsan AS made several measurements to assess the performance and fidelity of APIC's MicroATx link. The fiber optic link is for the transmission of of broadband, 20 GHz, RF signals to more than a km away. The application space for this link includes remote microwave transmissions, radio telescopes, electronic warfare sensors and radars. The MicroATx is a very high-performance transmitter that includes APIC's ultra-low RIN, high-power laser, very efficient and linear lithium niobate modulator, thermal electric cooler, and low-noise control and power conditioning electronics. This is a tier-1 product that was designed and built to meet high-performance requirements while operating reliably in the harsh environments of Navy tactical aircraft. Thus, these devices were built with expensive, custom, high-quality components.
Report
Share
Report
Share
Recommended
Datasheet 74 ls90
This document provides information on the DM74LS90 and DM74LS93 decade and binary counters integrated circuits. It includes general descriptions, electrical characteristics, logic diagrams, pinouts, and truth tables for the counters. The DM74LS90 is a divide-by-ten decade counter and the DM74LS93 is a divide-by-eight 4-bit binary counter. Both have features such as master-slave flip-flops, gated zero reset, maximum count frequencies of 32MHz and 20MHz respectively, and typical power dissipation of 45mW.
abc song
https://www.youtube.com/watch?v=Gsr6VSZM4gw
https://www.youtube.com/watch?v=toUxTxwlygg
https://www.youtube.com/watch?v=IFLTmbJnyeg
Original NPN Transistor D468 2SD468 468 TO-92 New
This document provides specifications for the 2SD468 NPN silicon transistor from Unisonic Technologies Co., Ltd. It is described as a low frequency power amplifier that can be used to complement the 2SB562 transistor. The document provides maximum ratings, electrical characteristics, and typical performance curves for the transistor, including DC current gain, saturation voltage, and output capacitance as functions of collector current and voltage.
Original PNP Transistor 2SA684L 2SA684 TO-92 New UNISONIC
This document provides information on the 2SA684 PNP silicon transistor made by Unisonic Technologies Co., Ltd. It includes descriptions of the transistor's features and applications as a power amplifier and driver. Specifications such as maximum ratings, electrical characteristics, and typical performance curves are given. The transistor comes in SOT-23, SOT-89, and TO-92NL packages and has an DC current gain ranging from 50-340 depending on operating conditions.
000930
The UTC CXA1191 is a single-chip integrated circuit designed for FM/AM radio receivers in devices like cassette players and headphones. It integrates the key components needed for both FM and AM reception, including RF amplifiers, mixers, oscillators, IF amplifiers, detectors, and an audio power amplifier. The chip operates from a 2-8.5V supply and consumes under 10mA for FM reception and under 4mA for AM reception. It has features like automatic band switching between FM and AM, electronic volume control, and FM muting.
Data serializing
This document discusses various methods of serializing data, including binary coded decimal (BCD) and ASCII encoding schemes. It provides examples of converting between ASCII, unpacked BCD, and packed BCD representations. Specific topics covered include serializing a byte of data one bit at a time, swapping nibbles, converting between I/O port binary and 7-segment display BCD, real-time clock packed BCD to ASCII conversion, and C code examples.
Study on 0.4GHz to 2.7GHz High Linearity Upconverting Mixer
This document summarizes a study on the Linear Technology LT5578 0.4GHz to 2.7GHz high linearity upconverting mixer. It provides details on the mixer's features such as high output IP3, low noise floor, and high conversion gain. The document describes the mixer's block diagram, IF and LO input interfaces, and RF output interface. It also provides typical performance curves and an application circuit example for a 450MHz RF application.
2878-CC-001 COORDINATED SERVICES LAYOUT
This document is an engineering plan showing the layout of underground utilities for an area, including electrical infrastructure, telecommunications networks, drainage systems, and plot connections. The plan legend defines various utility symbols used, such as for existing overhead power lines, underground cables, distribution pillars, and manholes. It also provides coordinates and notes for specific infrastructure elements.
Recommended
Datasheet 74 ls90
This document provides information on the DM74LS90 and DM74LS93 decade and binary counters integrated circuits. It includes general descriptions, electrical characteristics, logic diagrams, pinouts, and truth tables for the counters. The DM74LS90 is a divide-by-ten decade counter and the DM74LS93 is a divide-by-eight 4-bit binary counter. Both have features such as master-slave flip-flops, gated zero reset, maximum count frequencies of 32MHz and 20MHz respectively, and typical power dissipation of 45mW.
abc song
https://www.youtube.com/watch?v=Gsr6VSZM4gw
https://www.youtube.com/watch?v=toUxTxwlygg
https://www.youtube.com/watch?v=IFLTmbJnyeg
Original NPN Transistor D468 2SD468 468 TO-92 New
This document provides specifications for the 2SD468 NPN silicon transistor from Unisonic Technologies Co., Ltd. It is described as a low frequency power amplifier that can be used to complement the 2SB562 transistor. The document provides maximum ratings, electrical characteristics, and typical performance curves for the transistor, including DC current gain, saturation voltage, and output capacitance as functions of collector current and voltage.
Original PNP Transistor 2SA684L 2SA684 TO-92 New UNISONIC
This document provides information on the 2SA684 PNP silicon transistor made by Unisonic Technologies Co., Ltd. It includes descriptions of the transistor's features and applications as a power amplifier and driver. Specifications such as maximum ratings, electrical characteristics, and typical performance curves are given. The transistor comes in SOT-23, SOT-89, and TO-92NL packages and has an DC current gain ranging from 50-340 depending on operating conditions.
000930
The UTC CXA1191 is a single-chip integrated circuit designed for FM/AM radio receivers in devices like cassette players and headphones. It integrates the key components needed for both FM and AM reception, including RF amplifiers, mixers, oscillators, IF amplifiers, detectors, and an audio power amplifier. The chip operates from a 2-8.5V supply and consumes under 10mA for FM reception and under 4mA for AM reception. It has features like automatic band switching between FM and AM, electronic volume control, and FM muting.
Data serializing
This document discusses various methods of serializing data, including binary coded decimal (BCD) and ASCII encoding schemes. It provides examples of converting between ASCII, unpacked BCD, and packed BCD representations. Specific topics covered include serializing a byte of data one bit at a time, swapping nibbles, converting between I/O port binary and 7-segment display BCD, real-time clock packed BCD to ASCII conversion, and C code examples.
Study on 0.4GHz to 2.7GHz High Linearity Upconverting Mixer
This document summarizes a study on the Linear Technology LT5578 0.4GHz to 2.7GHz high linearity upconverting mixer. It provides details on the mixer's features such as high output IP3, low noise floor, and high conversion gain. The document describes the mixer's block diagram, IF and LO input interfaces, and RF output interface. It also provides typical performance curves and an application circuit example for a 450MHz RF application.
2878-CC-001 COORDINATED SERVICES LAYOUT
This document is an engineering plan showing the layout of underground utilities for an area, including electrical infrastructure, telecommunications networks, drainage systems, and plot connections. The plan legend defines various utility symbols used, such as for existing overhead power lines, underground cables, distribution pillars, and manholes. It also provides coordinates and notes for specific infrastructure elements.
Acs712
The document describes an integrated current sensor that provides precise current sensing for industrial and commercial applications. It features low noise analog signal conditioning, adjustable bandwidth via an external filter pin, and 5 microsecond rise time. The sensor outputs a voltage proportional to AC or DC current in a range of ±5, ±20, or ±30 amps, with 1.5% maximum error and 80 kHz bandwidth. It is provided in a small SOIC8 package.
555 IC working
The document discusses the 555 timer integrated circuit, which is commonly used to generate clock pulses or time delays in electronic circuits. It describes the internal components of the 555 timer, including two comparators, a flip-flop, and three resistors that create a voltage divider. The 555 timer can operate in astable or monostable modes to produce oscillating or single output pulses using external resistors and capacitors. Formulas are provided to calculate the frequency, period, and duty cycle in astable mode and the time delay in monostable mode.
The elecraft kx3 and qrp antennas
An overview of the Elecraft KX3 and various QRP antennas as presented to the York Region Amateur radio club meeting 11/12
Mini project
The document describes designing a frequency modulation (FM) signal using an ICNE566 voltage-controlled oscillator (VCO) chip and demodulating the signal using an ICLM565 phase-locked loop (PLL) chip. The modulation circuit uses the VCO with a resistor and capacitor to adjust the oscillation frequency based on an input voltage. For demodulation, the PLL chip extracts the original information from the modulated carrier wave. Hardware including the IC chips, resistors, capacitors, function generator, and power supply are used. The modulation and demodulation circuit diagrams and results are shown, verifying the design.
Study and implementation of comparator in cmos 50 nm technology
Abstract This paper describes the comparator circuits used in FLASH Analog to digital converter (ADC). The performance of FLASH ADC is greatly influenced by the choice of comparator. In this paper, first a single ended “Threshold Inverter Quantizer” (TIQ) is presented. The TIQ comparator is based on a CMOS inverter cell, in which voltage transfer characteristics (VTC) are changed by systematic transistor sizing. However, TIQ comparator is very sensitive to power supply noise. Another comparator circuit presented in this paper is “Two stage open loop comparator”. It is implemented in 50 nm CMOS Technology. Pre-simulation of comparator is done in LT-Spice and post layout simulation is done in Microwind 3.1. Keywords: CMOS, Comparator, TIQ (Threshold Inverter Quantizer), LT-Spice.
Advanced motion controls b15a20
The document describes the B15A series of brushless servo amplifiers. It provides specifications for three models (B12A6, B15A8, B15A20) including voltage ratings, current limits, switching frequency and dimensions. It also details features, operating modes, pin functions, setup instructions and ordering information.
555 timer as Astable Multivibrator
The document discusses the 555 timer integrated circuit and its use as an astable multivibrator. The 555 timer was designed in 1971 by Hans Camenzind and is used in oscillator circuits to provide timing delays. It works by charging and discharging a capacitor through two resistors, causing the output to switch between high and low states. When the capacitor voltage reaches 2/3 or 1/3 of the supply voltage, it triggers the internal flip-flop to change the output. This creates a continuous square wave at the output with a frequency determined by the resistor and capacitor values.
Lsf0108 q100 1664510
This document summarizes the key specifications of the LSF0108-Q100 8-bit bidirectional multi-voltage level translator. It supports translation between various voltage levels up to 100 MHz and is qualified for automotive applications from -40°C to +125°C. The device has 8 channels that allow for bidirectional translation between different voltage levels with no direction pin needed. It has applications in telecom infrastructure, industrial equipment, and automotive systems.
555 TIMER IC & its APPLICATION
This presentation discusses the 555 timer IC and its applications in analog circuit design. It begins by describing the basic building blocks of the 555 timer IC, which include an RS flip-flop, two comparators, a reference voltage source, and a discharge transistor. It then shows how the 555 timer can be configured as a monostable and astable multivibrator. Diagrams illustrate the voltage levels and switching in each configuration. Sample waveforms are displayed and the operations of the astable timer circuit are explained in steps. Applications for a square wave oscillator and clock circuit using the 555 timer IC are also presented.
(S.C.E.T) Appliction of pll fm demodulation fsk demodulation
This document discusses applications of phase-locked loops (PLLs), including FM demodulation and FSK demodulation. It describes the internal block diagram of the LM565 PLL integrated circuit and introduces common PLL ICs. Applications of PLLs mentioned include frequency multiplication/division, frequency translation, AM detection, FM detection, and FSK demodulation. Circuit diagrams and operating principles are provided for FM demodulation and FSK demodulation using a PLL. Advantages of using a PLL for FM demodulation include high linearity and the ability to handle wider bandwidth signals.
555 timer tutorial
The 555 timer is a versatile integrated circuit that can be used to generate accurate timing signals. It works by using internal comparators and a flip-flop to accurately time an external resistor-capacitor circuit. The 555 timer can be used in various configurations (monostable, bistable, astable) to generate pulses or oscillations for applications like timers, flashing lights, and tone generation. It is an inexpensive and robust chip contained in an 8-pin package that can drive loads directly from its output.
Sistem mikrokontroler 2 led
The document discusses writing code for microcontrollers using BASCOM AVR. It explains some important commands used in BASCOM AVR like $REGFILE to specify the microcontroller, $CYRSTAL to set the crystal time, CONFIG to declare ports as inputs or outputs. It also discusses using constants like CONST KEDIP to set a delay time, and looping commands like DO and LOOP to continuously toggle an LED on and off with a delay between states.
Ic 555 timer as astable
This document summarizes the operation of an astable multivibrator circuit using a 555 timer integrated circuit. The circuit consists of two comparators, three 5k ohm resistors, and a 0.01uF capacitor. It generates a square wave output without needing an external trigger, with the high and low times determined by the resistor and capacitor values. The duty cycle of the output wave is calculated as the charge time divided by the total period. Key advantages are its simple operation, low external component count, and perfect square wave output, though the duty cycle is limited to above 50%.
automation of waterpump using 8051 microcontroller
This document describes a project to build an automatic water level controller. It lists 4 project members and their guide. The apparatus includes a water tank, microcontroller, relay, sensors, motor and pump. There are 3 modes - automatic on/off using sensor signals, user-defined on/off using switches, and compensation mode to maintain a specific level. The circuit diagram, programming in KEIL, and hardware design are outlined. Components include a transformer, rectifier, regulator, and sensors to sense water levels and control the motor and pump automatically.
Rf atp nibong tebal p00128 rev 1 30 nov2016
This document provides information on the antenna system, equipment, and cell configuration for a site upgrade project in Nibong Tebal, Malaysia. It lists the existing and new antenna types, models, quantities, gains, orientations. It also includes power supply details, team contacts, and neighboring cell information for 2G, 3G and 4G networks. However, most cell configuration parameters are listed as N/A, suggesting they remain unchanged after the upgrade.
Power Supply Management
This document describes the design of a low-power physiological monitoring system to measure electrocardiogram (ECG) parameters. It uses voltage regulators and charge pumps to generate positive and negative supply voltages from a battery to power ECG sensors, instrumentation amplifiers, and filters. The system acquires ECG signals from sensors, conditions the signals with amplifiers and a notch filter, and outputs filtered ECG data for analysis or transmission. Key components include the REG711 and MAX1720 voltage converters, PS25201A ECG sensors, INA126 instrumentation amplifier, and AD8506 notch filter amplifier. The system is intended to be integrated into a wearable device for portable ECG monitoring.
Mp8126 r1.03 1384507
The MP8126 is a voltage regulator designed to efficiently provide power and voltage control to a satellite receiver's low noise block converter. It uses a boost converter followed by a linear regulator to generate a clean power source that does not interfere with the low-noise RF signal. It is compatible with the DiSEqC satellite standard and can provide voltage selection and compensation for voltage drops over long cables. The MP8126 is available in small package sizes and provides over-current, over-temperature and short-circuit protection.
Lm 311 datasheet
The document describes voltage comparators LM111, LM211, and LM311. It provides general descriptions of their features such as low input currents, wide operating voltage ranges, and compatibility with various logic levels. It also lists their absolute maximum ratings and typical electrical characteristics. Finally, it provides application examples and performance characteristic graphs.
555 Timer IC
The 555 timer IC is a versatile integrated circuit used in timer, pulse generation, and oscillator applications. It contains transistors, resistors, and diodes on a silicon chip. The 555 can be used in monostable, bistable, and astable modes to generate pulses or oscillations. It is commonly used in applications like blinking LEDs, timers, oscillators, and more due to its low cost, ease of use, and stability.
Ic 555
1.Introduction
The 555 IC was designed in 1971 by Hans Camenzind under contract to SigNetics Corporation.
555 timer is a highly stable circuit used to generate time delays, or Oscillations.
A single 555 timer can provide time delay ranging from microseconds to hours.
It operates from a wide range of power supplies ranging from + 5 Volts to + 18 Volts supply voltage.
2.Pin Configuration
3.Working of Pin
4.555 Integral circuit
5.Operating modes of IC
6. Bistable Mode
In bistable (also called Schmitt trigger) mode, the 555 timer acts as a basic flip-flop.
The trigger and reset inputs (pins 2 and 4 respectively on a 555) are held high via pull-up resistors while the threshold input (pin 6) is simply floating.
Thus configured, pulling the trigger momentarily to ground acts as a 'set' and transitions the output pin (pin 3) to Vcc (high state).
Pulling the reset input to ground acts as a 'reset' and transitions the output pin to ground (low state). No timing capacitors
Pin 5 (control voltage) is connected to ground via a small-value capacitor (usually 0.01 to 0.1 μF). Pin 7 (discharge) is left floating
7.Monostable Mode
Pulse generator circuit which the period is calculated from RC network and connected to external of 555 timer
Stable when the output logic LOW (logic = 0)
When a pulse is trigger at pin 2 (normally negative trigger pulse), timer output will change to HIGH (+Vs) for a while and change to LOW (stable condition). The condition will continue LOW until pulse is trigger again.
The timing period is triggered (started) when trigger input (555 pin 2) is less than 1/3 Vs, this makes the output high (+Vs) and the capacitor C1 starts to charge through resistor R1. Once the time period has started further trigger pulses are ignored.
The threshold input (555 pin 6) monitors the voltage across C1 and when this reaches 2/3 Vs the time period over and the output becomes LOW,
At the same time discharge (555 pin 7) is connected to 0V, discharging the capacitor ready for the next trigger.
8.Astable Mode
Astable multivibrators are also known as Free-running Multivibrator.
Astable do not need trigger pulse for external to change the output.
The period for LOW and HIGH can be calculated based on resistor and capacitor value that connected at outside of timer.
9.Applications
Schmitt trigger
PPM
PWM
Linear Ramp generator
Precision Timing
Pulse Generation
Time Delay Generation
Sequential Timing
Used as a quad timer
10. Conclusion
Hence 555 IC timer can produce very accurate and stable time delays, from microseconds to hours. It can be used with supply voltage varying from 5 to 18 V. Timer can be used in monostable mode of operation or astable mode of operation. Its various applications include waveform generator, missing pulse detector, frequency divider, pulse width modulator, burglar alarm, FSK generator, ramp generator, pulse position modulator etc.
IBS TRAINING（new）.pptx
Indoor Mobile Network IBS Basic Training provides an overview of indoor base station (IBS) network installation and configuration. It covers IBS equipment and materials like antennas, couplers, splitters and cables. It also discusses site survey techniques including measuring signal strength and identifying the best donor antenna position. The document demonstrates how to design an IBS network with examples of system diagrams and how to connect floors. It provides guidance on configuring and testing the network using software tools and outlines common troubleshooting steps.
Slew rate, Open and closed loop configurations
This document discusses integrated circuits and operational amplifiers. It provides information on the classification, advantages and development of integrated circuits over time, moving from small-scale to large-scale integration. It also details the characteristics, symbols, configurations and applications of operational amplifiers, including inverting, non-inverting and voltage follower circuits. Operational amplifiers can be used in both open and closed loop modes, with closed loop preferred for linear applications due to negative feedback controlling gain.
More Related Content
What's hot
Acs712
The document describes an integrated current sensor that provides precise current sensing for industrial and commercial applications. It features low noise analog signal conditioning, adjustable bandwidth via an external filter pin, and 5 microsecond rise time. The sensor outputs a voltage proportional to AC or DC current in a range of ±5, ±20, or ±30 amps, with 1.5% maximum error and 80 kHz bandwidth. It is provided in a small SOIC8 package.
555 IC working
The document discusses the 555 timer integrated circuit, which is commonly used to generate clock pulses or time delays in electronic circuits. It describes the internal components of the 555 timer, including two comparators, a flip-flop, and three resistors that create a voltage divider. The 555 timer can operate in astable or monostable modes to produce oscillating or single output pulses using external resistors and capacitors. Formulas are provided to calculate the frequency, period, and duty cycle in astable mode and the time delay in monostable mode.
The elecraft kx3 and qrp antennas
An overview of the Elecraft KX3 and various QRP antennas as presented to the York Region Amateur radio club meeting 11/12
Mini project
The document describes designing a frequency modulation (FM) signal using an ICNE566 voltage-controlled oscillator (VCO) chip and demodulating the signal using an ICLM565 phase-locked loop (PLL) chip. The modulation circuit uses the VCO with a resistor and capacitor to adjust the oscillation frequency based on an input voltage. For demodulation, the PLL chip extracts the original information from the modulated carrier wave. Hardware including the IC chips, resistors, capacitors, function generator, and power supply are used. The modulation and demodulation circuit diagrams and results are shown, verifying the design.
Study and implementation of comparator in cmos 50 nm technology
Abstract This paper describes the comparator circuits used in FLASH Analog to digital converter (ADC). The performance of FLASH ADC is greatly influenced by the choice of comparator. In this paper, first a single ended “Threshold Inverter Quantizer” (TIQ) is presented. The TIQ comparator is based on a CMOS inverter cell, in which voltage transfer characteristics (VTC) are changed by systematic transistor sizing. However, TIQ comparator is very sensitive to power supply noise. Another comparator circuit presented in this paper is “Two stage open loop comparator”. It is implemented in 50 nm CMOS Technology. Pre-simulation of comparator is done in LT-Spice and post layout simulation is done in Microwind 3.1. Keywords: CMOS, Comparator, TIQ (Threshold Inverter Quantizer), LT-Spice.
Advanced motion controls b15a20
The document describes the B15A series of brushless servo amplifiers. It provides specifications for three models (B12A6, B15A8, B15A20) including voltage ratings, current limits, switching frequency and dimensions. It also details features, operating modes, pin functions, setup instructions and ordering information.
555 timer as Astable Multivibrator
The document discusses the 555 timer integrated circuit and its use as an astable multivibrator. The 555 timer was designed in 1971 by Hans Camenzind and is used in oscillator circuits to provide timing delays. It works by charging and discharging a capacitor through two resistors, causing the output to switch between high and low states. When the capacitor voltage reaches 2/3 or 1/3 of the supply voltage, it triggers the internal flip-flop to change the output. This creates a continuous square wave at the output with a frequency determined by the resistor and capacitor values.
Lsf0108 q100 1664510
This document summarizes the key specifications of the LSF0108-Q100 8-bit bidirectional multi-voltage level translator. It supports translation between various voltage levels up to 100 MHz and is qualified for automotive applications from -40°C to +125°C. The device has 8 channels that allow for bidirectional translation between different voltage levels with no direction pin needed. It has applications in telecom infrastructure, industrial equipment, and automotive systems.
555 TIMER IC & its APPLICATION
This presentation discusses the 555 timer IC and its applications in analog circuit design. It begins by describing the basic building blocks of the 555 timer IC, which include an RS flip-flop, two comparators, a reference voltage source, and a discharge transistor. It then shows how the 555 timer can be configured as a monostable and astable multivibrator. Diagrams illustrate the voltage levels and switching in each configuration. Sample waveforms are displayed and the operations of the astable timer circuit are explained in steps. Applications for a square wave oscillator and clock circuit using the 555 timer IC are also presented.
(S.C.E.T) Appliction of pll fm demodulation fsk demodulation
This document discusses applications of phase-locked loops (PLLs), including FM demodulation and FSK demodulation. It describes the internal block diagram of the LM565 PLL integrated circuit and introduces common PLL ICs. Applications of PLLs mentioned include frequency multiplication/division, frequency translation, AM detection, FM detection, and FSK demodulation. Circuit diagrams and operating principles are provided for FM demodulation and FSK demodulation using a PLL. Advantages of using a PLL for FM demodulation include high linearity and the ability to handle wider bandwidth signals.
555 timer tutorial
The 555 timer is a versatile integrated circuit that can be used to generate accurate timing signals. It works by using internal comparators and a flip-flop to accurately time an external resistor-capacitor circuit. The 555 timer can be used in various configurations (monostable, bistable, astable) to generate pulses or oscillations for applications like timers, flashing lights, and tone generation. It is an inexpensive and robust chip contained in an 8-pin package that can drive loads directly from its output.
Sistem mikrokontroler 2 led
The document discusses writing code for microcontrollers using BASCOM AVR. It explains some important commands used in BASCOM AVR like $REGFILE to specify the microcontroller, $CYRSTAL to set the crystal time, CONFIG to declare ports as inputs or outputs. It also discusses using constants like CONST KEDIP to set a delay time, and looping commands like DO and LOOP to continuously toggle an LED on and off with a delay between states.
Ic 555 timer as astable
This document summarizes the operation of an astable multivibrator circuit using a 555 timer integrated circuit. The circuit consists of two comparators, three 5k ohm resistors, and a 0.01uF capacitor. It generates a square wave output without needing an external trigger, with the high and low times determined by the resistor and capacitor values. The duty cycle of the output wave is calculated as the charge time divided by the total period. Key advantages are its simple operation, low external component count, and perfect square wave output, though the duty cycle is limited to above 50%.
automation of waterpump using 8051 microcontroller
This document describes a project to build an automatic water level controller. It lists 4 project members and their guide. The apparatus includes a water tank, microcontroller, relay, sensors, motor and pump. There are 3 modes - automatic on/off using sensor signals, user-defined on/off using switches, and compensation mode to maintain a specific level. The circuit diagram, programming in KEIL, and hardware design are outlined. Components include a transformer, rectifier, regulator, and sensors to sense water levels and control the motor and pump automatically.
Rf atp nibong tebal p00128 rev 1 30 nov2016
This document provides information on the antenna system, equipment, and cell configuration for a site upgrade project in Nibong Tebal, Malaysia. It lists the existing and new antenna types, models, quantities, gains, orientations. It also includes power supply details, team contacts, and neighboring cell information for 2G, 3G and 4G networks. However, most cell configuration parameters are listed as N/A, suggesting they remain unchanged after the upgrade.
Power Supply Management
This document describes the design of a low-power physiological monitoring system to measure electrocardiogram (ECG) parameters. It uses voltage regulators and charge pumps to generate positive and negative supply voltages from a battery to power ECG sensors, instrumentation amplifiers, and filters. The system acquires ECG signals from sensors, conditions the signals with amplifiers and a notch filter, and outputs filtered ECG data for analysis or transmission. Key components include the REG711 and MAX1720 voltage converters, PS25201A ECG sensors, INA126 instrumentation amplifier, and AD8506 notch filter amplifier. The system is intended to be integrated into a wearable device for portable ECG monitoring.
Mp8126 r1.03 1384507
The MP8126 is a voltage regulator designed to efficiently provide power and voltage control to a satellite receiver's low noise block converter. It uses a boost converter followed by a linear regulator to generate a clean power source that does not interfere with the low-noise RF signal. It is compatible with the DiSEqC satellite standard and can provide voltage selection and compensation for voltage drops over long cables. The MP8126 is available in small package sizes and provides over-current, over-temperature and short-circuit protection.
Lm 311 datasheet
The document describes voltage comparators LM111, LM211, and LM311. It provides general descriptions of their features such as low input currents, wide operating voltage ranges, and compatibility with various logic levels. It also lists their absolute maximum ratings and typical electrical characteristics. Finally, it provides application examples and performance characteristic graphs.
555 Timer IC
The 555 timer IC is a versatile integrated circuit used in timer, pulse generation, and oscillator applications. It contains transistors, resistors, and diodes on a silicon chip. The 555 can be used in monostable, bistable, and astable modes to generate pulses or oscillations. It is commonly used in applications like blinking LEDs, timers, oscillators, and more due to its low cost, ease of use, and stability.
Ic 555
1.Introduction
The 555 IC was designed in 1971 by Hans Camenzind under contract to SigNetics Corporation.
555 timer is a highly stable circuit used to generate time delays, or Oscillations.
A single 555 timer can provide time delay ranging from microseconds to hours.
It operates from a wide range of power supplies ranging from + 5 Volts to + 18 Volts supply voltage.
2.Pin Configuration
3.Working of Pin
4.555 Integral circuit
5.Operating modes of IC
6. Bistable Mode
In bistable (also called Schmitt trigger) mode, the 555 timer acts as a basic flip-flop.
The trigger and reset inputs (pins 2 and 4 respectively on a 555) are held high via pull-up resistors while the threshold input (pin 6) is simply floating.
Thus configured, pulling the trigger momentarily to ground acts as a 'set' and transitions the output pin (pin 3) to Vcc (high state).
Pulling the reset input to ground acts as a 'reset' and transitions the output pin to ground (low state). No timing capacitors
Pin 5 (control voltage) is connected to ground via a small-value capacitor (usually 0.01 to 0.1 μF). Pin 7 (discharge) is left floating
7.Monostable Mode
Pulse generator circuit which the period is calculated from RC network and connected to external of 555 timer
Stable when the output logic LOW (logic = 0)
When a pulse is trigger at pin 2 (normally negative trigger pulse), timer output will change to HIGH (+Vs) for a while and change to LOW (stable condition). The condition will continue LOW until pulse is trigger again.
The timing period is triggered (started) when trigger input (555 pin 2) is less than 1/3 Vs, this makes the output high (+Vs) and the capacitor C1 starts to charge through resistor R1. Once the time period has started further trigger pulses are ignored.
The threshold input (555 pin 6) monitors the voltage across C1 and when this reaches 2/3 Vs the time period over and the output becomes LOW,
At the same time discharge (555 pin 7) is connected to 0V, discharging the capacitor ready for the next trigger.
8.Astable Mode
Astable multivibrators are also known as Free-running Multivibrator.
Astable do not need trigger pulse for external to change the output.
The period for LOW and HIGH can be calculated based on resistor and capacitor value that connected at outside of timer.
9.Applications
Schmitt trigger
PPM
PWM
Linear Ramp generator
Precision Timing
Pulse Generation
Time Delay Generation
Sequential Timing
Used as a quad timer
10. Conclusion
Hence 555 IC timer can produce very accurate and stable time delays, from microseconds to hours. It can be used with supply voltage varying from 5 to 18 V. Timer can be used in monostable mode of operation or astable mode of operation. Its various applications include waveform generator, missing pulse detector, frequency divider, pulse width modulator, burglar alarm, FSK generator, ramp generator, pulse position modulator etc.
What's hot (20)
Study and implementation of comparator in cmos 50 nm technology
Study and implementation of comparator in cmos 50 nm technology
(S.C.E.T) Appliction of pll fm demodulation fsk demodulation
(S.C.E.T) Appliction of pll fm demodulation fsk demodulation
automation of waterpump using 8051 microcontroller
automation of waterpump using 8051 microcontroller
Similar to Independant Assessment of APIC's MicroATX RFoF Link by Aselsan Electronic Industries Inc.
IBS TRAINING（new）.pptx
Indoor Mobile Network IBS Basic Training provides an overview of indoor base station (IBS) network installation and configuration. It covers IBS equipment and materials like antennas, couplers, splitters and cables. It also discusses site survey techniques including measuring signal strength and identifying the best donor antenna position. The document demonstrates how to design an IBS network with examples of system diagrams and how to connect floors. It provides guidance on configuring and testing the network using software tools and outlines common troubleshooting steps.
Slew rate, Open and closed loop configurations
This document discusses integrated circuits and operational amplifiers. It provides information on the classification, advantages and development of integrated circuits over time, moving from small-scale to large-scale integration. It also details the characteristics, symbols, configurations and applications of operational amplifiers, including inverting, non-inverting and voltage follower circuits. Operational amplifiers can be used in both open and closed loop modes, with closed loop preferred for linear applications due to negative feedback controlling gain.
Chip Scale Pkg
This document discusses the development of a 6-24 GHz mixer in a novel chip-scale package using 0.25um enhancement mode PHEMT technology. Key advantages of the chip-scale package include eliminating die assembly steps, reducing parasitics, and enabling a thinner package for improved thermal dissipation. Measurement results show the uncapped mixer has a conversion loss of ~9dB up to 22GHz and an IIP3 of +19dBm, while the capped mixer has slightly higher loss and lower IIP3. Isolation measurements were over 35dB for LO-RF and 40dB for LO-IF. This represents the first reported chip-scale packaged mixer.
EE673+F14+T2+Project1+Final+Pres+r3rg
The document summarizes the design and testing of two RF switches operating at 4 GHz - one using PIN diodes and one using FETs. Parts were selected based on cost, availability, and ease of modeling. The PIN diode switch achieved 57.6 dB isolation and 1.3 dB insertion loss using three shunt diodes. The FET switch achieved a maximum of 22.3 dB isolation and 6.2 dB insertion loss using a single shunt FET, though insertion loss was reduced to 3.1 dB at the cost of isolation. Both designs incorporated tuning stubs to improve performance parameters.
5988 5846 en+an-1285+24aug10%2c0
This document describes the design and performance of two low noise amplifiers using the ATF-55143 PHEMT for 5GHz wireless standards. Both amplifiers provide over 10dB of gain and a noise figure below 1.5dB across their bandwidth. The first operates from 5.125-5.325GHz with an output IP3 of 26.5dBm and the second from 5.725-5.825GHz with an output IP3 of 26dBm. Circuit simulations and measurements of prototypes verified the designs meet specifications.
Miniproject report receiver
This document provides details of an 80m ARDF receiver project completed by two engineering students, Gaurav Sinha and Atul Kumar, under the guidance of their professor Prof. S. Venkatesh. The 3-sentence summary is:
The project report describes the design and development of a single-conversion superheterodyne receiver tuned to the 80m amateur radio band with an MCU interface for frequency selection and other controls. Key aspects of the receiver covered include the circuit design and components, functionality enabled by the MCU, simulation results, mechanical construction details, performance specifications, advantages and limitations. Testing and alignment procedures are also outlined.
NTU2018_01_26_Ph.D._oral_defence_YC
This document discusses research on millimeter-wave mixers. It outlines the design of broadband LO/IF mixers with low DC power consumption, high conversion gain, and large IP1dB. The document reviews previous mixer designs and their specifications. It then proposes using a Darlington cell configuration where the third transistor acts as an IF amplifier to achieve broadband performance. Simulations show the third transistor can provide IF amplification to widen the mixer's bandwidth while maintaining conversion gain. The goal is to design a mixer that addresses needs for next-generation radio astronomy systems.
1210_HFE_PowerAmps
There is a need to develop highly linear, high frequency chipsets to address increasing traffic congestion on point-to-point microwave links between 10-27 GHz. RFMD has developed a new generation of chipsets, including linear power amplifiers, to support higher order modulation schemes. The power amplifiers demonstrate high gain and intermodulation distortion suppression at output powers up to 28 dBm. They maintain good performance when operated as variable gain amplifiers over a 15 dB range, addressing the need for dynamic power control.
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
This document provides specifications for a 10Gb/s DWDM XFP transceiver module that operates at wavelengths across the C band from 1528.77nm to 1561.42nm over single mode fiber links up to 80km. It uses EML laser transmitters and APD photodetectors, supports data rates of 9.95-11.3Gb/s, and complies with the XFP MSA specification including digital diagnostics via a 2-wire interface.
10Gb/s 80km DWDM SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz ITU...
The document is a datasheet for a 10Gb/s DWDM SFP+ transceiver module that operates at wavelengths between 1528.77nm and 1561.42nm. It supports data rates up to 10Gb/s over single mode fiber links up to 80km. The module uses an EML transmitter and APD photo-detector and complies with common 10Gb/s Ethernet and telecom standards. It has a duplex LC connector and digital diagnostics monitoring via a 2-wire interface.
Athens Standard & Technical
The document discusses trends in data networking technologies including faster switching and transmission speeds. It notes that 10GbE is established while 40GbE and 100GbE devices will emerge in 2010. Data center servers will adopt 40GbE by 2011 and 100GbE by 2018. To support these higher speeds, cabling infrastructure will need to accommodate standards like OM3/OM4 optical fiber and potential 40GbE copper cabling operating at around 2GHz. Proper cabling now can help support 40GbE and faster speeds in the future.
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
10Gb/s DWDM XFP Transceiver
Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU Grid C Band, EML/PIN
Single mode, 40km, 0~70°C
10Gb/s DWDM SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz ITU Grid...
SHPP-10G-Dxx-40 is a very compact 10Gb/s DWDM optical transceiver module for serial optical communication
applications at 10Gb/s, inter-converting the 10Gb/s serial electrical data stream with the 10Gb/s optical signal. It complies
with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-ER. It provides Digital diagnostics functions via a 2-wire serial
interface as specified in SFF-8472. It features hot plug, easy upgrading and low EMI emission. The high-performance
DWDM EML transmitter and high-sensitivity PIN receiver provide superior performance for Ethernet applications up to link length of 40km on single mode fiber.
Using Distortion Shaping Technique to Equalize ADC THD Performance Between ATEs
This document discusses using distortion shaping techniques to equalize the THD performance of ADCs between different automatic test equipment (ATEs). It presents a method of generating test signals with an arbitrary waveform generator (AWG) that shifts harmonic distortion components closer to the Nyquist frequency to improve the AWG's harmonic performance and allow more accurate testing of ADC THD specifications. Test results show the proposed method significantly reduces harmonic distortion in the AWG output and allows different testers to achieve identical ADC test results, resolving issues caused by performance differences between ATEs. The technique is especially effective for higher resolution ADCs where noise floors are lower.
Advanced motion controls se10a40
The document describes the SE30A Series brushless servo amplifiers made by Electromate. The series includes models SE10A8, SE10A20, SE10A40, SE30A8, SE30A20, and SE30A40. The amplifiers are small, surface-mount devices that drive brushless motors with 3-phase sine wave current generated from an encoder. They have features like optical isolation, DIP switch selectable modes, regenerative braking, and overcurrent protection.
BlueOptics Bo31j15680d 10gbase-zr xfp transceiver 1550nm 80km singlemode lc d...
The document describes an XFP 10G 1550nm optical transceiver that operates at up to 10Gbps over 80km of single mode fiber. It provides digital diagnostic monitoring of parameters like supply voltage, laser power, and temperature. The transceiver complies with relevant interoperability standards and safety regulations, and offers extended temperature ranges and a 5-year warranty.
160-Gb-s Silicon All-Optical Packet Switch for Buffer-less Optical Burst Swit...
160-Gb-s Silicon All-Optical Packet Switch for Buffer-less Optical Burst Swit...University of Technology
A 160-Gb/s silicon-based all-optical packet switch is demonstrated for bufferless optical burst switching. One of four 160-Gb/s packets is switched using cross-phase modulation in a silicon nanowire, with error-free performance achieved. The packet switch could eliminate the need for optical buffering in small-scale networks like board-to-board interconnects using optical burst switching protocols. Experimental results show one of four 160-Gb/s packets is switched out of the silicon nanowire with error-free performance.BlueOptics Bo65j27610d 10gbase-bx-u xfp transceiver tx1270nm-rx1330nm 10 km s...
BlueOptics Bo65j27610d 10gbase-bx-u xfp transceiver tx1270nm-rx1330nm 10 km singlemode lc-simplex 10 gigabit
BlueOptics Bo66hxx640d 2-4-8gbase-cwdm xfp transceiver 1471nm - 1611nm 40km s...
BlueOptics Bo66hxx640d 2-4-8gbase-cwdm xfp transceiver 1471nm - 1611nm 40km singlemode lc duplex 10 gigabit
BlueOptics Bo66hxx640d 2-4-8gbase-cwdm xfp transceiver 1471nm - 1611nm 40km s...
BlueOptics Bo66hxx640d 2-4-8gbase-cwdm xfp transceiver 1471nm - 1611nm 40km singlemode lc duplex 10 gigabit
Similar to Independant Assessment of APIC's MicroATX RFoF Link by Aselsan Electronic Industries Inc. (20)
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
10Gb/s 80km DWDM SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz ITU...
10Gb/s 80km DWDM SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz ITU...
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
10Gb/s DWDM XFP Transceiver Hot Pluggable, Duplex LC, +3.3V & +5V, 100GHz ITU...
10Gb/s DWDM SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz ITU Grid...
10Gb/s DWDM SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 100GHz ITU Grid...
Using Distortion Shaping Technique to Equalize ADC THD Performance Between ATEs
Using Distortion Shaping Technique to Equalize ADC THD Performance Between ATEs
BlueOptics Bo31j15680d 10gbase-zr xfp transceiver 1550nm 80km singlemode lc d...
BlueOptics Bo31j15680d 10gbase-zr xfp transceiver 1550nm 80km singlemode lc d...
160-Gb-s Silicon All-Optical Packet Switch for Buffer-less Optical Burst Swit...
160-Gb-s Silicon All-Optical Packet Switch for Buffer-less Optical Burst Swit...
BlueOptics Bo65j27610d 10gbase-bx-u xfp transceiver tx1270nm-rx1330nm 10 km s...
BlueOptics Bo65j27610d 10gbase-bx-u xfp transceiver tx1270nm-rx1330nm 10 km s...
BlueOptics Bo66hxx640d 2-4-8gbase-cwdm xfp transceiver 1471nm - 1611nm 40km s...
BlueOptics Bo66hxx640d 2-4-8gbase-cwdm xfp transceiver 1471nm - 1611nm 40km s...
BlueOptics Bo66hxx640d 2-4-8gbase-cwdm xfp transceiver 1471nm - 1611nm 40km s...
BlueOptics Bo66hxx640d 2-4-8gbase-cwdm xfp transceiver 1471nm - 1611nm 40km s...
Recently uploaded
按照学校原版(UAL文凭证书)伦敦艺术大学毕业证快速办理
出售假学位证【微信:176555708】【(UAL毕业证书)伦敦艺术大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Adelaide文凭证书)阿德莱德大学毕业证如何办理
学校原版办理海外认证【微信:176555708】【(Adelaide毕业证书)阿德莱德大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Greenwich文凭证书)格林威治大学毕业证如何办理
毕业原版【微信:176555708】【(Greenwich毕业证书)格林威治大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UCSB毕业证)圣塔芭芭拉社区大学毕业证如何办理
UCSB毕业证文凭证书【微信95270640】☀《圣塔芭芭拉社区大学毕业证购买》Q微信95270640《UCSB毕业证可查真实》文凭、本科、硕士、研究生学历都可以做,留信认证的作用：
1：该专业认证可证明留学生真实留学身份。
2：同时对留学生所学专业等级给予评定。
3：国家专业人才认证中心颁发入库证书
4：这个入网证书并且可以归档到地方
5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在网内查询个人身份证信息后，同步读取人才网入库信息。
6：个人职称评审加20分。
7：个人信誉贷款加10分。
8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才《文凭UCSB毕业证书原版制作UCSB成绩单》仿制UCSB毕业证成绩单圣塔芭芭拉社区大学学位证书pdf电子图》。
如果您是以下情况，我们都能竭诚为您解决实际问题：【公司采用定金+余款的付款流程，以最大化保障您的利益，让您放心无忧】
1、在校期间，因各种原因未能顺利毕业，拿不到官方毕业证+微信95270640
2、面对父母的压力，希望尽快拿到圣塔芭芭拉社区大学圣塔芭芭拉社区大学本科毕业证成绩单；
3、不清楚流程以及材料该如何准备圣塔芭芭拉社区大学圣塔芭芭拉社区大学本科毕业证成绩单；
4、回国时间很长，忘记办理；
5、回国马上就要找工作，办给用人单位看；
6、企事业单位必须要求办理的；
面向美国乔治城大学毕业留学生提供以下服务:
【★圣塔芭芭拉社区大学圣塔芭芭拉社区大学本科毕业证成绩单毕业证、成绩单等全套材料，从防伪到印刷，从水印到钢印烫金，与学校100%相同】
【★真实使馆认证（留学人员回国证明），使馆存档可通过大使馆查询确认】
【★真实教育部认证，教育部存档，教育部留服网站可查】
【★真实留信认证，留信网入库存档，可查圣塔芭芭拉社区大学圣塔芭芭拉社区大学本科毕业证成绩单】
我们从事工作十余年的有着丰富经验的业务顾问，熟悉海外各国大学的学制及教育体系，并且以挂科生解决毕业材料不全问题为基础，为客户量身定制1对1方案，未能毕业的回国留学生成功搭建回国顺利发展所需的桥梁。我们一直努力以高品质的教育为起点，以诚信、专业、高效、创新作为一切的行动宗旨，始终把“诚信为主、质量为本、客户第一”作为我们全部工作的出发点和归宿点。同时为海内外留学生提供大学毕业证购买、补办成绩单及各类分数修改等服务；归国认证方面，提供《留信网入库》申请、《国外学历学位认证》申请以及真实学籍办理等服务，帮助众多莘莘学子实现了一个又一个梦想。
专业服务，请勿犹豫联系我
如果您真实毕业回国，对于学历认证无从下手，请联系我，我们免费帮您递交
诚招代理：本公司诚聘当地代理人员，如果你有业余时间，或者你有同学朋友需要，有兴趣就请联系我
你赢我赢，共创双赢
你做代理，可以帮助圣塔芭芭拉社区大学同学朋友
你做代理，可以拯救圣塔芭芭拉社区大学失足青年
你做代理，可以挽救圣塔芭芭拉社区大学一个个人才
你做代理，你将是别人人生圣塔芭芭拉社区大学的转折点
你做代理，可以改变自己，改变他人，给他人和自己一个机会娃于是天天扳着手指算计着读书也格外刻苦无奈时间总过得太慢太慢每次父亲往家打电话山娃总抢着接听一个劲地提醒父亲别忘了正月说的话电话那头总会传来父亲嘿嘿的笑连连说记得记得但别忘了拿奖状进城啊考试一结束山娃就迫不及待地给父亲挂电话：爸我拿奖了三好学生接我进城吧父亲果然没有食言第二天就请假回家接山娃离开爷爷奶奶的那一刻山娃又伤心得泪如雨下宛如军人奔赴前线般难舍和悲壮卧空调大巴挤长蛇列车山娃发现车上挤满了乡
LORRAINE ANDREI_LEQUIGAN_GOOGLE CALENDAR
Google Calendar is a versatile tool that allows users to manage their schedules and events effectively. With Google Calendar, you can create and organize calendars, set reminders for important events, and share your calendars with others. It also provides features like creating events, inviting attendees, and accessing your calendar from mobile devices. Additionally, Google Calendar allows you to embed calendars in websites or platforms like SlideShare, making it easier for others to view and interact with your schedules.
按照学校原版(Greenwich文凭证书)格林威治大学毕业证快速办理
出售买大学文凭【微信:176555708】【(Greenwich毕业证书)格林威治大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UQ文凭证书)昆士兰大学毕业证如何办理
毕业原版【微信:176555708】【(UQ毕业证书)昆士兰大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Adelaide文凭证书)阿德莱德大学毕业证如何办理
毕业原版【微信:176555708】【(Adelaide毕业证书)阿德莱德大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(IIT毕业证)伊利诺伊理工大学毕业证如何办理
IIT本科学位证成绩单【微信95270640】（伊利诺伊理工大学毕业证成绩单本科学历）Q微信95270640(补办IIT学位文凭证书)伊利诺伊理工大学留信网学历认证怎么办理伊利诺伊理工大学毕业证成绩单精仿本科学位证书硕士文凭证书认证Seneca College diplomaoffer,Transcript办理硕士学位证书造假伊利诺伊理工大学假文凭学位证书制作IIT本科毕业证书硕士学位证书精仿伊利诺伊理工大学学历认证成绩单修改制作，办理真实认证、留信认证、使馆公证、购买成绩单，购买假文凭，购买假学位证，制造假国外大学文凭、毕业公证、毕业证明书、录取通知书、Offer、在读证明、雅思托福成绩单、假文凭、假毕业证、请假条、国际驾照、网上存档可查！
办国外伊利诺伊理工大学伊利诺伊理工大学毕业证offer教育部学历学位认证留信认证大使馆认证留学回国人员证明修改成绩单信封申请学校offer录取通知书在读证明offer letter。
快速办理高仿国外毕业证成绩单：
1伊利诺伊理工大学毕业证+成绩单+留学回国人员证明+教育部学历认证（全套留学回国必备证明材料给父母及亲朋好友一份完美交代）;
2雅思成绩单托福成绩单OFFER在读证明等留学相关材料（申请学校转学甚至是申请工签都可以用到）。
3.毕业证 #成绩单等全套材料从防伪到印刷从水印到钢印烫金高精仿度跟学校原版100%相同。
专业服务请勿犹豫联系我！联系人微信号：95270640诚招代理：本公司诚聘当地代理人员如果你有业余时间有兴趣就请联系我们。
国外伊利诺伊理工大学伊利诺伊理工大学毕业证offer办理过程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。哪里父母对我们的爱和思念为我们的生命增加了光彩给予我们自由追求的力量生活的力量我们也不忘感恩正因为这股感恩的线牵着我们使我们在一年的结束时刻义无反顾的踏上了回家的旅途人们常说父母恩最难回报愿我能以当年爸爸妈妈对待小时候的我们那样耐心温柔地对待我将渐渐老去的父母体谅他们以反哺之心奉敬父母以感恩之心孝顺父母哪怕只为父母换洗衣服为父母喂饭送汤按摩酸痛的腰背握着父母的手扶着他们一步一步地慢慢散步.让我们间
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR - Slides Onl...
In this session delivered at Leeds IoT, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub
按照学校原版(Columbia文凭证书)哥伦比亚大学毕业证快速办理
快速办理假学位证【微信:176555708】【(Columbia毕业证书)哥伦比亚大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(AU文凭证书)英国阿伯丁大学毕业证快速办理
出售毕业典礼【微信:176555708】【(AU毕业证书)英国阿伯丁大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(KCL文凭证书)伦敦国王学院毕业证快速办理
咨询办理ps毕业证【微信:176555708】【(KCL毕业证书)伦敦国王学院毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
加急办理美国南加州大学毕业证文凭毕业证原版一模一样
原版一模一样【微信：741003700 】【美国南加州大学毕业证文凭】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
按照学校原版(UVic文凭证书)维多利亚大学毕业证快速办理
不能毕业办理文凭'毕业证购买'【微信:176555708】【(UVic毕业证书)维多利亚大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Monash文凭证书)莫纳什大学毕业证如何办理
毕业原版【微信:176555708】【(Monash毕业证书)莫纳什大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(SUT文凭证书)斯威本科技大学毕业证快速办理
退学办理电子版【微信:176555708】【(SUT毕业证书)斯威本科技大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(Westminster文凭证书)威斯敏斯特大学毕业证快速办理
加急购买办理毕业证【微信:176555708】【(Westminster毕业证书)威斯敏斯特大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(TheAuckland毕业证书)新西兰奥克兰大学毕业证如何办理
原版定制新西兰奥克兰大学毕业证【微信：176555708】【TheAuckland毕业证书成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
学历顾问：微信：176555708
Recently uploaded (20)
Production.pptxd dddddddddddddddddddddddddddddddddd
Production.pptxd dddddddddddddddddddddddddddddddddd
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR - Slides Onl...
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR - Slides Onl...
Independant Assessment of APIC's MicroATX RFoF Link by Aselsan Electronic Industries Inc.
- 1. 1/11SST FIBER LINK TEST RESULTS of APIC’s 20 GHz MicroATx-based RFoF Link An independent assessment by Aselsan Electronic Industries Inc. Yenimahalle, Ankara - TURKIYE SEPTEMBER 2019 FIBER LINK TEST RESULTS
- 2. 2/11SST FIBER LINK TEST RESULTS • TEST SET UP • GAIN • Input P1DB • NF • OIP3 • OIP2 • SFDR
- 3. 3/11SST SETUP Note: Input of the Fiber link is terminated by 50 ohm load for NF test. Two signal generators and power combiner are used for OIP3 test.
- 4. 4/11SST GAIN GAIN Note: Input cable (Minibend 12 inch) and output cable (Minibend 16 inch) are not calibrated. New units will be tested using Network Analyzers. Input Power = -30 dBm
- 5. 5/11SST Input P1dB Note: Input P1dB = -9 dBm for 50MHz Pin = -30dBm Pout = -23.6dBm Gain= 6.4dB Pin = -9dBm Pout = -3.6dBm Gain= 5.4 dB Note: Input cable (Minibend 12 inch) and output cable (Minibend 16 inch) are not calibrated. Note: Input P1dB = -8 dBm for 10GHz Pin = -30dBm Pout = -27.1dBm Gain= 2.9dB Pin = -8dBm Pout = -6.1dBm Gain= 1.9 dB Note: Input P1dB = -10 dBm for 17GHz Pin = -30dBm Pout = -25.5dBm Gain= 4.5dB Pin = -10dBm Pout = -6.5dBm Gain= 3.5dB
- 6. 6/11SST NF @ 1GHz NF @ 1GHz Note: RBW=10Hz, VBW=10Hz, Input Att=0; PreAmp=ON Note: Input cable (Minibend 12 inch) and output cable (Minibend 16 inch) are not calibrated. Noise figüre = 5 dB @ 1GHz -174dBm/Hz + 10log(BW) + Gain = -153 dBm (Gain=6 dB @ 1GHz)
- 7. 7/11SST NF @ 10GHz NF @ 10GHz Noise figüre = 7 dB @ 10GHz -174dBm/Hz + 10log(BW) + Gain = -154 dBm (Gain=3 dB @ 10GHz) Note: RBW=10Hz, VBW=10Hz, Input Att=0; PreAmp=ON Note: Input cable (Minibend 12 inch) and output cable (Minibend 16 inch) are not calibrated.
- 8. 8/11SST NF @ 17GHz NF @ 17GHz Noise figüre = 8.5 dB @ 17GHz -174dBm/Hz + 10log(BW) + Gain = -154 dBm (Gain=4.5 dB @ 17GHz) Note: RBW=10Hz, VBW=10Hz, Input Att=0; PreAmp=ON Note: Input cable (Minibend 12 inch) and output cable (Minibend 16 inch) are not calibrated.
- 9. 9/11SST OIP3 @ 1GHz Note: Input cable (Minibend 12 inch) and output cable (Minibend 16 inch) are not calibrated. OIP3 @1GHz OIP3=5dBm @ 1GHz
- 10. 10/11SST OIP3 @ 10GHz OIP3 @10GHz Note: Input cable (Minibend 12 inch) and output cable (Minibend 16 inch) are not calibrated. OIP3=3.5dBm @ 10GHz
- 11. 11/11SST OIP3 @ 17GHz OIP3 @17GHz Note: Input cable (Minibend 12 inch) and output cable (Minibend 16 inch) are not calibrated. OIP3=1dBm @ 17GHz
- 12. 12/11SST OIP3 - NOTE OIP3 of the signal analyzer is very high so it does not effect the results. We have checked the results with the different input attenuation level (10, 20, 30dB) and observed same results.
- 13. 13/11SST OIP2 Input Level Output @1GHZ Output @2GHZ Output @8GHZ Output @16GHZ Output @12GHZ Output @24GHZ -30 dBm -25 dBm -80 dBm -26 dBm -70 dBm -26 dBm -80 dBm -25 dBm -20 dBm -70 dBm -21 dBm -60 dBm -21.8 dBm -71.8 dBm -20 dBm -15dBm -59 dBm -16 dBm -50 dBm -16.8 dBm -62 dBm -15 dBm -10 dBm -49 dBm -11.6 dBm -41 dBm -12 dBm -53 dBm OIP2 @ 1GHz = 30dBm OIP2 @ 8GHz = 18dBm OIP2 @ 12GHz =28dBm Note: Input cable (Minibend 12 inch) and output cable (Minibend 16 inch) are not calibrated.
- 14. 14/11SST SFDR – 1GHz Note: No spurs observed , for different span (10kHz, 100kHz, 1MHz, 10MHz, 100MHz, 1GHz, Full SPAN)
- 15. 15/11SST SFDR – 10GHz Note: No spurs observed , for different span (10kHz, 100kHz, 1MHz, 10MHz, 100MHz, 1GHz, Full SPAN)
- 16. 16/11SST SFDR – 17GHz Note: No spurs observed , for different span (10kHz, 100kHz, 1MHz, 10MHz, 100MHz, 1GHz, Full SPAN)