Increasing Use of Plastic Gears in Engineering
•Download as PPTX, PDF•
0 likes•8 views
Since a long time now, moulded plastic gears have worked as alternatives to metal gears in drivers that are lightly loaded. These transfer power soundlessly and often without any lubrication in applications such as food processors, watches and windshield wipers. http://engineeringfornoobs.weebly.com/blog/increasing-use-of-plastic-gears-in-engineering
Report
Share
Report
Share
Recommended
News on Intelligent Tire Technoloies - Smart Tire Materials - Innovation in T...
Our ITT 2015 will bring together relevant stakeholders to ensure maximum knowledge transfer and professional exchange between 17 - 19 November, 2015 at the Hotel Kempinski Taschenbergpalais in Dresden, Germany. During a full three-days-program with 2 conference days and 4 workshops you will meet international experts from OEMs, suppliers, and academia to discuss, hear and learn about their experiences and challenges in the fields of Intelligent Tire Technology.
Take a look at our conference agenda here:
http://bit.ly/Tires_SP_Agenda
IPS TEMP_GATWICK_FINAL
1) IPS was contracted to perform pipe freezing at Gatwick Airport to enable the installation of new pipe branches without draining the entire chilled water system.
2) Working at an international airport like Gatwick leaves no room for error, as shutting down the chilled water system could disrupt service for over 16.5 million annual passengers.
3) IPS completed the work in challenging conditions, using the building's goods lift to transport liquid nitrogen to the roof in heavy rain within an 8 hour window to avoid disrupting airport operations.
GE Powering Conference - Welcome Address
The document summarizes GE's presence and activities in Vietnam. It discusses GE's Powering Vietnam Conference in 2017 in Hanoi. It provides an overview of GE's global revenues and employee numbers across its various business divisions including Power, Oil & Gas, Aviation, and Healthcare. It then focuses on GE's energy portfolio and financing capabilities. The document concludes by detailing GE's history and investments in Vietnam since 1993, including its Hanoi and Ho Chi Minh City offices, Hai Phong wind factory, and recent acquisitions that have expanded its local workforce to over 3,000 employees.
RST2014_Astrakhan_E-Trike
The document describes an electric transforming vehicle called the e-Trike or Bravo eGo. It can fold up to fit on sidewalks and unfold to travel on roads up to 90 kmph. This solves issues of traffic, parking and pollution in cities. It has received investment and awards. The founder aims to pre-sell 600 units to prove market demand and reach profitability. Production in existing facilities could employ over 200 people at high production levels.
Brisbane Innovation Series Apr10 Cate Collins
Cate Collins (Lend Lease) presented on the trend to move beyond delivering green buildings to developing sustainable precincts, and the vital role innovation, design technology and partnerships will play in achieving ‘Green Precincts’.
Carcraft homeowners initiative not to be penalised
In a climate of economic instability, every little helps, and savvy homeowners have increasingly been offering unused driveway space for rent. Though seemingly a sensible and forward thinking idea, those embracing it have faced penalties.
OTR - Shearography
This document discusses the differences between testing off-the-road (OTR) tires and truck and bus radial (TBR) tires using interferometric tire testing (ITT) systems. Key differences for OTR tires include larger dimensions, higher weights, and additional belts. ITT systems for OTR tires require adapted machine concepts like larger measuring chambers, loading shuttles, and automatic tire centering. ITT is especially important for OTR tires given their high costs and the expenses associated with tire failures. The document also provides examples of SDS Systemtechnik's ITT systems for OTR tire manufacturing facilities.
Types of Earthmoving Equipment And Their Uses in Construction
Heavy equipment or say earth moving equipment is essential in every construction site to complete large scale commercial projects in the least time.
Recommended
News on Intelligent Tire Technoloies - Smart Tire Materials - Innovation in T...
Our ITT 2015 will bring together relevant stakeholders to ensure maximum knowledge transfer and professional exchange between 17 - 19 November, 2015 at the Hotel Kempinski Taschenbergpalais in Dresden, Germany. During a full three-days-program with 2 conference days and 4 workshops you will meet international experts from OEMs, suppliers, and academia to discuss, hear and learn about their experiences and challenges in the fields of Intelligent Tire Technology.
Take a look at our conference agenda here:
http://bit.ly/Tires_SP_Agenda
IPS TEMP_GATWICK_FINAL
1) IPS was contracted to perform pipe freezing at Gatwick Airport to enable the installation of new pipe branches without draining the entire chilled water system.
2) Working at an international airport like Gatwick leaves no room for error, as shutting down the chilled water system could disrupt service for over 16.5 million annual passengers.
3) IPS completed the work in challenging conditions, using the building's goods lift to transport liquid nitrogen to the roof in heavy rain within an 8 hour window to avoid disrupting airport operations.
GE Powering Conference - Welcome Address
The document summarizes GE's presence and activities in Vietnam. It discusses GE's Powering Vietnam Conference in 2017 in Hanoi. It provides an overview of GE's global revenues and employee numbers across its various business divisions including Power, Oil & Gas, Aviation, and Healthcare. It then focuses on GE's energy portfolio and financing capabilities. The document concludes by detailing GE's history and investments in Vietnam since 1993, including its Hanoi and Ho Chi Minh City offices, Hai Phong wind factory, and recent acquisitions that have expanded its local workforce to over 3,000 employees.
RST2014_Astrakhan_E-Trike
The document describes an electric transforming vehicle called the e-Trike or Bravo eGo. It can fold up to fit on sidewalks and unfold to travel on roads up to 90 kmph. This solves issues of traffic, parking and pollution in cities. It has received investment and awards. The founder aims to pre-sell 600 units to prove market demand and reach profitability. Production in existing facilities could employ over 200 people at high production levels.
Brisbane Innovation Series Apr10 Cate Collins
Cate Collins (Lend Lease) presented on the trend to move beyond delivering green buildings to developing sustainable precincts, and the vital role innovation, design technology and partnerships will play in achieving ‘Green Precincts’.
Carcraft homeowners initiative not to be penalised
In a climate of economic instability, every little helps, and savvy homeowners have increasingly been offering unused driveway space for rent. Though seemingly a sensible and forward thinking idea, those embracing it have faced penalties.
OTR - Shearography
This document discusses the differences between testing off-the-road (OTR) tires and truck and bus radial (TBR) tires using interferometric tire testing (ITT) systems. Key differences for OTR tires include larger dimensions, higher weights, and additional belts. ITT systems for OTR tires require adapted machine concepts like larger measuring chambers, loading shuttles, and automatic tire centering. ITT is especially important for OTR tires given their high costs and the expenses associated with tire failures. The document also provides examples of SDS Systemtechnik's ITT systems for OTR tire manufacturing facilities.
Types of Earthmoving Equipment And Their Uses in Construction
Heavy equipment or say earth moving equipment is essential in every construction site to complete large scale commercial projects in the least time.
P PRINT 31.pdf
Hybrid bicycles blend characteristics from more specialized road bikes, touring bikes and mountain bikes. They provide a general-purpose bike that can tolerate a wide range of riding conditions and applications. Their stability, comfort and ease of use make them popular with novice cyclists, casual riders, commuters, and children. The document discusses the development of a low cost hybrid bicycle that uses a DC motor, lithium ion battery, and regenerative braking to provide electric pedal assistance up to 28kmph. It aims to provide an alternative to automobiles for medium distance travel while focusing on energy conservation.
Design & Analysis of foldable E-Bicycle
The document describes the design and analysis of a foldable electric bicycle. It discusses the motivation to create a compact e-bike that can be easily transported. The key components of the design include an aluminum alloy folding frame, a 36V rear hub motor, integrated 36V lithium-ion battery, single-speed chain drive system, mechanical disc and V-brakes, 27.5-inch tires, and rigid fork suspension. Various materials were analyzed for the frame and aluminum 6061 alloy was selected for its strength to weight ratio. The design aims to create a lightweight, portable electric bicycle that provides eco-friendly transportation.
Company Presentation of the Uses of Plastic Piling In Flooding Applications
Company Presentation of the Uses of Plastic Piling In Flooding ApplicationsThe Hammerman Equipment Plastic Piling Co. Ltd
This document summarizes a company that offers various plastic piling and flood management products. Some key points:
1. They provide long-lasting plastic sheet piling, pile drivers, and drainage filters made from recycled materials for flood control and erosion applications.
2. Their plastic sheet piling comes in thicknesses from 3.5-11mm and lengths up to 13m, and can be used with wood or steel posts for a durable hybrid system.
3. They have developed new mini vibrators for quickly installing plastic sheet piling as well as cut-off piles with seals and bracing systems for rapid deployment of flood barriers.Machining Versus Molding Tolerances in Manufacturing Automotive Sealing Systems
The automotive industry has been at the forefront of converting traditional metal parts to plastics. The latter surely offer greater design freedom, opportunity for consolidation, fewer assembly operations, reduced secondary finishing, weight reduction, lower total system costs, a range of properties tailored to specific applications, the ability to withstand temperatures, immunity to most chemicals and corrosive environments. They offer processing in many colors, electrical non-conductivity (insulation from electrical shocks), good thermal breaks (“warmth-to-the-touch”), and low sound transmission (tendency to muffle noise). Nonetheless, plastics have only tapped an estimated 15% of their tremendous potential to replace metals. This is particularly to increase with newer high-performance plastics, increasing sophistication in alloying and blending technologies, and use of computer-aided design and engineering (CAD/CAE) systems. The latter enable engineers to visualize complex parts and molding tools more effectively and faster than ever before. This article identifies fundamental steps and requirements to conduct an efficient and successful conversion of metallic parts to plastics, reviewing the replacement design process from concept to production; an under-the-hood rear retainer for Ford Motor Company is detailed as a case study.
Group project brochure
The document summarizes a study on the life cycle energy usage and emissions of aluminum versus cast iron engine blocks. The study found that while aluminum blocks use more energy to produce, they result in lighter engines that save little fuel over the vehicle's lifetime. Specifically, the excess energy used to produce aluminum blocks is not recovered through fuel savings until close to the vehicle's scrap time. The study concludes there is no real advantage to the automotive industry's shift toward aluminum blocks in recent decades from a sustainability perspective.
Iiepl profile
IIEPL is an engineering and architectural design firm established in 2008 that specializes in designing and developing low-cost, high-quality construction products through in-house research. They offer services including architectural and structural engineering design, infrastructure project design, pre-cast building component design, and more. Some of their projects include designing pre-stressed concrete beams and slabs, waste plastic to fuel conversion plants, and bridges.
PS2012-BS-36-E
This document proposes an ultra-urban folding vehicle that folds down to a small size for parking to address increasing traffic congestion. The electric vehicle would provide passenger safety while folded down to a two-wheel size footprint for parking. The goal is to design and build a prototype that is fully functioning, safe, structurally sound, and considers manufacturing to demonstrate a green, economical and simple solution.
ppt for conferance.pptx
The document discusses the design of an electric motorcycle chassis using composite material called Innegra S-Fiber. It aims to reduce pollution by switching to electric vehicles since motorcycles account for 62% of petrol consumption in India. The design process involved selecting Innegra S-Fiber due its lightweight and stiff properties compared to other materials. Analysis showed Innegra S-Fiber experienced the least deformation under loading, making it well-suited for the electric motorcycle chassis. The final design achieved the goals of high strength, low weight, and a practical electric motorcycle for urban transportation.
EMT 111 NEW.pptx
The document discusses the design of an electric motorcycle chassis using composite material called Innegra S-Fiber. It aims to reduce pollution by switching to electric vehicles since motorcycles account for 62% of petrol consumption in India. The design process analyzed different materials like aluminum, titanium, and Innegra S-Fiber for the chassis to find the optimal lightweight yet stiff material. Innegra S-Fiber was selected as it exhibited the least deformation under loading conditions compared to other materials, allowing for a strong but lightweight chassis. This helps achieve the goal of an electric motorcycle suitable for street use with reduced weight and pollution.
Scrap Tyres to oil production - A project profile by SMB Environmental Projec...
Scrap Tyres to oil production - A project profile by SMB Environmental Projec...burhaan taskeen azad
A low cost environmental friendly project with very high returns of more than IRs 30,000 per day - repeat per day. Solves a n alarmingly rising problem of scrap tyre disposal on one hand and creates precious energy source in the process. A project not only good in Environmental management but also helps saving foreign exchange and in reducing import oil bill.Design and Manufacturing of Low Cost, Non-Polluting Urban Transport Unit
- Students designed and built a low-cost, non-polluting electric vehicle for urban transport to provide a clean alternative to fossil fuel vehicles.
- The unique two-tube frame design provides strength while keeping the vehicle lightweight. It is powered by a 250W electric motor and batteries that allow for sufficient range for small-distance commutes.
- The goal was to make the vehicle affordable and practical for everyday use by people of all ages and occupations, without requiring a license, registration or certification like other electric vehicles.
The benefits of electric scooters
Scooteretti is Ontario’s #1 retailer of electric scooters and e bikes. Visit us today at http://www.scooteretti.com/ to learn more about Scooteretti and our products.
Challenges faced by the engineering industry in uk
As time passes and population expands, the challenges faced by every industry become more and more peculiar. This is especially true in the case of engineering industry where we always aim to achieve the impossible.
http://engineeringfornoobs.weebly.com/blog/challenges-faced-by-the-engineering-industry-in-uk
Fuel-Cell-Challenges-GMability
Fuel cell technology has benefits for space exploration and holds promise to power vehicles, homes, and buildings more efficiently while reducing environmental impacts. However, for widespread practical use of fuel cells, important challenges around hydrocarbon fuel reforming, storage, cost, and developing infrastructure must be addressed. Hydrocarbon fuel reforming during a transition period could allow continued use of existing fuel sources while adapting to hydrogen. Storage technologies must match gasoline tanks' capacity and ease of refueling. Cost remains too high for commercial vehicles and facilities due to expensive catalysts and membranes in fuel cells. Developing hydrogen infrastructure is the greatest challenge to commercializing fuel cells.
The future of tire plants
Jacob Peled, The executive chairman of the Pelmar Engineering Group was a featured speaker at the Future Tire Conference October 2014 in Brussels, Belgium.
Years of experience in the tire industry were carried at Jacob's keynotes speeches about Future Tire Plants at the Conference, providing key insights about the criterias upon tire plants will be built in the future, with respect to the major changes in the various tire production departments.
Pedal Operated Bicycle Drain Cleaner
This document describes a pedal-operated bicycle drain cleaner. It begins with an abstract that explains the device replaces electric power with pedal power by connecting a bicycle to a drain cleaner using a shaft. Rotary motion from pedaling turns the drain cleaner. The device is intended for use in remote areas without electricity.
The document then reviews literature on previous drain cleaning devices and the benefits of a pedal-powered system. It presents the design and components of the proposed drain cleaner, connected via chain drive to a bicycle. Pedaling the bicycle generates mechanical energy to power the drain cleaning blades without electricity. This provides a low-cost solution for drain cleaning in off-grid rural areas.
Why Casting Manufacturing Is Important.pptx
In the realm of creation and industry, where ingenuity meets craftsmanship, there exists an ancient yet ever-evolving technique that has shaped the very foundations of our modern world – casting manufacturing.
Like an age-old alchemy, casting has been an instrumental force, transmuting raw materials into magnificent structures and intricate components, bridging the chasm between imagination and reality.
Flexible pavements using plastic as a road construction material: A Review
This document discusses using plastic waste as a construction material in flexible pavements. It begins with an abstract noting the growing issue of plastic waste and the potential for reusing plastic in road construction. It then provides background on road construction materials and techniques. The literature review summarizes several research papers that studied using plastic as an additive in bitumen for paving roads. The research found that plastic waste can increase the strength and durability of roads while providing an environmentally-friendly use for plastic garbage.
How engineering has simplified our lives
After a long day at work you just feel like throwing your computer out of the window but even in that state you cannot deny the role that engineering has played in simplifying our lives. No doubt it has made our lives hectic with all the beeping and buzzing but it also helps us to lead a lifestyle which is a lot more comfortable than what our earlier generations have lived.
http://engineeringfornoobs.weebly.com/blog/how-engineering-has-simplified-our-lives
Km08 pneumatic automatic bumper (wecompress)
Mechanical engineering project topics for final year, 1000KV Technologies, Live projects 1000kv technologies, EEE project list, mechatronics projects, live projects ameerpet, live projects near me, live projects institutes Hyderabad, mechanical projects hyderabad,
1000KV Technologies Live projects 9030844877, 9030844866 Educational consultant in Hyderabad, Telangana
Address: #A2, Eureka court complex, 2nd floor, kallu compound road, 2nd floor, A2 flat, image hospital near, Ameerpet, Hyderabad, Telangana 500016
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
More Related Content
Similar to Increasing Use of Plastic Gears in Engineering
P PRINT 31.pdf
Hybrid bicycles blend characteristics from more specialized road bikes, touring bikes and mountain bikes. They provide a general-purpose bike that can tolerate a wide range of riding conditions and applications. Their stability, comfort and ease of use make them popular with novice cyclists, casual riders, commuters, and children. The document discusses the development of a low cost hybrid bicycle that uses a DC motor, lithium ion battery, and regenerative braking to provide electric pedal assistance up to 28kmph. It aims to provide an alternative to automobiles for medium distance travel while focusing on energy conservation.
Design & Analysis of foldable E-Bicycle
The document describes the design and analysis of a foldable electric bicycle. It discusses the motivation to create a compact e-bike that can be easily transported. The key components of the design include an aluminum alloy folding frame, a 36V rear hub motor, integrated 36V lithium-ion battery, single-speed chain drive system, mechanical disc and V-brakes, 27.5-inch tires, and rigid fork suspension. Various materials were analyzed for the frame and aluminum 6061 alloy was selected for its strength to weight ratio. The design aims to create a lightweight, portable electric bicycle that provides eco-friendly transportation.
Company Presentation of the Uses of Plastic Piling In Flooding Applications
Company Presentation of the Uses of Plastic Piling In Flooding ApplicationsThe Hammerman Equipment Plastic Piling Co. Ltd
This document summarizes a company that offers various plastic piling and flood management products. Some key points:
1. They provide long-lasting plastic sheet piling, pile drivers, and drainage filters made from recycled materials for flood control and erosion applications.
2. Their plastic sheet piling comes in thicknesses from 3.5-11mm and lengths up to 13m, and can be used with wood or steel posts for a durable hybrid system.
3. They have developed new mini vibrators for quickly installing plastic sheet piling as well as cut-off piles with seals and bracing systems for rapid deployment of flood barriers.Machining Versus Molding Tolerances in Manufacturing Automotive Sealing Systems
The automotive industry has been at the forefront of converting traditional metal parts to plastics. The latter surely offer greater design freedom, opportunity for consolidation, fewer assembly operations, reduced secondary finishing, weight reduction, lower total system costs, a range of properties tailored to specific applications, the ability to withstand temperatures, immunity to most chemicals and corrosive environments. They offer processing in many colors, electrical non-conductivity (insulation from electrical shocks), good thermal breaks (“warmth-to-the-touch”), and low sound transmission (tendency to muffle noise). Nonetheless, plastics have only tapped an estimated 15% of their tremendous potential to replace metals. This is particularly to increase with newer high-performance plastics, increasing sophistication in alloying and blending technologies, and use of computer-aided design and engineering (CAD/CAE) systems. The latter enable engineers to visualize complex parts and molding tools more effectively and faster than ever before. This article identifies fundamental steps and requirements to conduct an efficient and successful conversion of metallic parts to plastics, reviewing the replacement design process from concept to production; an under-the-hood rear retainer for Ford Motor Company is detailed as a case study.
Group project brochure
The document summarizes a study on the life cycle energy usage and emissions of aluminum versus cast iron engine blocks. The study found that while aluminum blocks use more energy to produce, they result in lighter engines that save little fuel over the vehicle's lifetime. Specifically, the excess energy used to produce aluminum blocks is not recovered through fuel savings until close to the vehicle's scrap time. The study concludes there is no real advantage to the automotive industry's shift toward aluminum blocks in recent decades from a sustainability perspective.
Iiepl profile
IIEPL is an engineering and architectural design firm established in 2008 that specializes in designing and developing low-cost, high-quality construction products through in-house research. They offer services including architectural and structural engineering design, infrastructure project design, pre-cast building component design, and more. Some of their projects include designing pre-stressed concrete beams and slabs, waste plastic to fuel conversion plants, and bridges.
PS2012-BS-36-E
This document proposes an ultra-urban folding vehicle that folds down to a small size for parking to address increasing traffic congestion. The electric vehicle would provide passenger safety while folded down to a two-wheel size footprint for parking. The goal is to design and build a prototype that is fully functioning, safe, structurally sound, and considers manufacturing to demonstrate a green, economical and simple solution.
ppt for conferance.pptx
The document discusses the design of an electric motorcycle chassis using composite material called Innegra S-Fiber. It aims to reduce pollution by switching to electric vehicles since motorcycles account for 62% of petrol consumption in India. The design process involved selecting Innegra S-Fiber due its lightweight and stiff properties compared to other materials. Analysis showed Innegra S-Fiber experienced the least deformation under loading, making it well-suited for the electric motorcycle chassis. The final design achieved the goals of high strength, low weight, and a practical electric motorcycle for urban transportation.
EMT 111 NEW.pptx
The document discusses the design of an electric motorcycle chassis using composite material called Innegra S-Fiber. It aims to reduce pollution by switching to electric vehicles since motorcycles account for 62% of petrol consumption in India. The design process analyzed different materials like aluminum, titanium, and Innegra S-Fiber for the chassis to find the optimal lightweight yet stiff material. Innegra S-Fiber was selected as it exhibited the least deformation under loading conditions compared to other materials, allowing for a strong but lightweight chassis. This helps achieve the goal of an electric motorcycle suitable for street use with reduced weight and pollution.
Scrap Tyres to oil production - A project profile by SMB Environmental Projec...
Scrap Tyres to oil production - A project profile by SMB Environmental Projec...burhaan taskeen azad
A low cost environmental friendly project with very high returns of more than IRs 30,000 per day - repeat per day. Solves a n alarmingly rising problem of scrap tyre disposal on one hand and creates precious energy source in the process. A project not only good in Environmental management but also helps saving foreign exchange and in reducing import oil bill.Design and Manufacturing of Low Cost, Non-Polluting Urban Transport Unit
- Students designed and built a low-cost, non-polluting electric vehicle for urban transport to provide a clean alternative to fossil fuel vehicles.
- The unique two-tube frame design provides strength while keeping the vehicle lightweight. It is powered by a 250W electric motor and batteries that allow for sufficient range for small-distance commutes.
- The goal was to make the vehicle affordable and practical for everyday use by people of all ages and occupations, without requiring a license, registration or certification like other electric vehicles.
The benefits of electric scooters
Scooteretti is Ontario’s #1 retailer of electric scooters and e bikes. Visit us today at http://www.scooteretti.com/ to learn more about Scooteretti and our products.
Challenges faced by the engineering industry in uk
As time passes and population expands, the challenges faced by every industry become more and more peculiar. This is especially true in the case of engineering industry where we always aim to achieve the impossible.
http://engineeringfornoobs.weebly.com/blog/challenges-faced-by-the-engineering-industry-in-uk
Fuel-Cell-Challenges-GMability
Fuel cell technology has benefits for space exploration and holds promise to power vehicles, homes, and buildings more efficiently while reducing environmental impacts. However, for widespread practical use of fuel cells, important challenges around hydrocarbon fuel reforming, storage, cost, and developing infrastructure must be addressed. Hydrocarbon fuel reforming during a transition period could allow continued use of existing fuel sources while adapting to hydrogen. Storage technologies must match gasoline tanks' capacity and ease of refueling. Cost remains too high for commercial vehicles and facilities due to expensive catalysts and membranes in fuel cells. Developing hydrogen infrastructure is the greatest challenge to commercializing fuel cells.
The future of tire plants
Jacob Peled, The executive chairman of the Pelmar Engineering Group was a featured speaker at the Future Tire Conference October 2014 in Brussels, Belgium.
Years of experience in the tire industry were carried at Jacob's keynotes speeches about Future Tire Plants at the Conference, providing key insights about the criterias upon tire plants will be built in the future, with respect to the major changes in the various tire production departments.
Pedal Operated Bicycle Drain Cleaner
This document describes a pedal-operated bicycle drain cleaner. It begins with an abstract that explains the device replaces electric power with pedal power by connecting a bicycle to a drain cleaner using a shaft. Rotary motion from pedaling turns the drain cleaner. The device is intended for use in remote areas without electricity.
The document then reviews literature on previous drain cleaning devices and the benefits of a pedal-powered system. It presents the design and components of the proposed drain cleaner, connected via chain drive to a bicycle. Pedaling the bicycle generates mechanical energy to power the drain cleaning blades without electricity. This provides a low-cost solution for drain cleaning in off-grid rural areas.
Why Casting Manufacturing Is Important.pptx
In the realm of creation and industry, where ingenuity meets craftsmanship, there exists an ancient yet ever-evolving technique that has shaped the very foundations of our modern world – casting manufacturing.
Like an age-old alchemy, casting has been an instrumental force, transmuting raw materials into magnificent structures and intricate components, bridging the chasm between imagination and reality.
Flexible pavements using plastic as a road construction material: A Review
This document discusses using plastic waste as a construction material in flexible pavements. It begins with an abstract noting the growing issue of plastic waste and the potential for reusing plastic in road construction. It then provides background on road construction materials and techniques. The literature review summarizes several research papers that studied using plastic as an additive in bitumen for paving roads. The research found that plastic waste can increase the strength and durability of roads while providing an environmentally-friendly use for plastic garbage.
How engineering has simplified our lives
After a long day at work you just feel like throwing your computer out of the window but even in that state you cannot deny the role that engineering has played in simplifying our lives. No doubt it has made our lives hectic with all the beeping and buzzing but it also helps us to lead a lifestyle which is a lot more comfortable than what our earlier generations have lived.
http://engineeringfornoobs.weebly.com/blog/how-engineering-has-simplified-our-lives
Km08 pneumatic automatic bumper (wecompress)
Mechanical engineering project topics for final year, 1000KV Technologies, Live projects 1000kv technologies, EEE project list, mechatronics projects, live projects ameerpet, live projects near me, live projects institutes Hyderabad, mechanical projects hyderabad,
1000KV Technologies Live projects 9030844877, 9030844866 Educational consultant in Hyderabad, Telangana
Address: #A2, Eureka court complex, 2nd floor, kallu compound road, 2nd floor, A2 flat, image hospital near, Ameerpet, Hyderabad, Telangana 500016
Similar to Increasing Use of Plastic Gears in Engineering (20)
Company Presentation of the Uses of Plastic Piling In Flooding Applications
Company Presentation of the Uses of Plastic Piling In Flooding Applications
Machining Versus Molding Tolerances in Manufacturing Automotive Sealing Systems
Machining Versus Molding Tolerances in Manufacturing Automotive Sealing Systems
Scrap Tyres to oil production - A project profile by SMB Environmental Projec...
Scrap Tyres to oil production - A project profile by SMB Environmental Projec...
Design and Manufacturing of Low Cost, Non-Polluting Urban Transport Unit
Design and Manufacturing of Low Cost, Non-Polluting Urban Transport Unit
Challenges faced by the engineering industry in uk
Challenges faced by the engineering industry in uk
Flexible pavements using plastic as a road construction material: A Review
Flexible pavements using plastic as a road construction material: A Review
Recently uploaded
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaA SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Recently uploaded (20)
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
Increasing Use of Plastic Gears in Engineering
- 1. http://engineeringfornoobs.weebly.com/blog/increasin g-use-of-plastic-gears-in-engineering Increasing Use of Plastic Gears in Engineering
- 2. http://engineeringfornoobs.weebly.com/blog/increasin g-use-of-plastic-gears-in-engineering Since a long time now, moulded plastic gears have worked as alternatives to metal gears in drivers that are lightly loaded. These transfer power soundlessly and often without any lubrication in applications such as food processors, watches and windshield wipers. Use of plastic gears has resulted in significant reduction in the number of components used while simultaneously resisting chemicals in several applications.
- 3. http://engineeringfornoobs.weebly.com/blog/increasin g-use-of-plastic-gears-in-engineering Contact us: DK Engineering 20 Castle Ct, Wem, Shropshire, SY4 5JS Tel: 01939 232 347 Mobile: 07887 754 780
- 4. http://engineeringfornoobs.weebly.com/blog/increasin g-use-of-plastic-gears-in-engineering To find out more information visit our site: