Canice Ibe has over 25 years of experience in coating inspection, corrosion detection, quality control, and non-destructive testing. She has led inspection teams and ensured integrity of piping and equipment. Her experience includes inspection of pressure vessels, heat exchangers, plant piping, structures, pipelines, storage tanks, and other industrial equipment. She is certified in advanced ultrasonic imaging, coating inspection, and welding inspection.

1. CANICE IBE
139 Newbrook Lane, Springfield, NJ, 07081 908-591-0665 cannyibe@yahoo.com
CORROSION, WELDING AND COATING ENGINEERING INSPECTOR
Total of 25 years of experience in Coating Inspection,Corrosion Detection, Quality Control and Non Destructive
Testing of Pressure Vessels, Heat Exchangers, Plant Piping and Structures for Petrochemical Plants, Thermal Power
Stations, Refineries, Oxygen Plant & Steel Plant, Cross country Pipelines, Oil & Gas Pipeline (Offshore & Onshore)
Projects, Storage Tanks and other industrial equipment inspection using acoustic video imaging to detect defects due
to corrosion. Led inspection personnelto achieve the targets and plan to maintain the integrity of piping and
equipment by allocating appropriate personnel to suit the requirement.
 Review / Preparation of Quality Assurance Plan (QAP) to meet ISO 9000 standards.
 Follow up a corrective action to improve the Quality system.
 Review / Preparation of Quality Control Procedures, WPS, PQR and Welders Qualification Test.
 Review / Interpretation of Radiographic films of weld as per the applicable codes.
 Witness of several tests including; Destructive testing,Chemical testing,Painting / Coating, Holiday test,
Hydrostatic test.
 Co-ordination with third party inspection / client as per the contractual requirement.
 Working as Client/Owner Representative, Project Management Consultant & Third Party Inspection (TPI).
Competencies:
Preparing of surfaces,sand blasting, casting,painting, gauging,reading of instruments, coating, inspecting,manual
blasting, centrifugal blasting, testing,micrometer, calipers, jetting vacuumunit, section unit, working to
specifications, conventionalair gun,air flow and film and gauge, magnetic DFT gauge,constant DFT calibration
using NIST, pin hole and holiday detector, power tools, slim gauge, and wet and dry gauge film.
PROFESSIONAL EXPERIENCE
NUCO PAINTING CORP, ISLANDIA NY. 2014 to Present.
QUALITY CONTROL INSPECTOR, BROOKLYN BRIDGE NEW YORK.
Work strictly to the specification from the job owner and the contractor.
Inspect all works done on main cables and suspender cables every day.
Make sure that appropriate coating is applied. Witness every mixing before application.
Check weather conditions before coating.
Perform chloride test and review it.
Check all coated cables for holiday and run.
Perform WFT both on the main and suspender cables.
Document and report all the activities for the day.
UTV ENVIRONMENTAL & ENGINEERING CORP, BETHESDA, MD
OFFSHOREINSPECTOR 2012 to 2014
Worked on several offshore client projects at a partner company’s (Aluminum Gold Engineering Company Limited
in Lagos, Nigeria.). Tasks include Quality Control & Inspection of Welding, AUT, Non Destructive Testing,
Painting, Coating of Pipe Lay Installation, Jacket Installation, Top side and Hookup Projects supervision.
 Reviewed the WPS & PQR.
 Verified the WPQT & Mechanical Test. Checked that all onshore/offshore-related QA/QC work is carried
out in accordance with the approved PQP and Inspection & Test plan.
 Ensured that all documentation to execute the work such as approved welding procedures, Quality Control
procedures,NDT procedures,Codes; standards are available at work site.
 Verified that all applicable equipment is calibrated and has valid certification.
 Inspected all Welding activities.

2.  Reviewed all project documentations for conformance with work requirements.
 Supervised installation processes to ensure that they are carried out in accordance with approved
procedures and specifications.
 Inspected and confirmed that welding consumables are per specifications and in required quality/ quantity.

3. GPI, LEBANON NJ. 2009 to 2012
INSPECTOR
Inspected multiple NJDOT bridge cleaning and painting projects: Interstate Bridge Painting Contract Route I-280-
Contract 1 and 3; RteI-80-Contract 2; Route 1&9 Truck over Passaic and Hackensack Rivers, Essex County and
Hudson county. Brooklyn Bridge . Brooklyn New York.
These bridge painting projects involves the removal of existing old lead based paint and repainting with a Northeast
Protective Coating Committee (NEPCOAT) approved system. The project incorporates traffic control on a high
speed highway, staging, and environmental (Lead Abatement) constrains unique to repainting on major high urban
bridges. The construction service contract involves the management of four separate painting contracts with three
independent painting contractors.Extensive coordination is done on a daily basis with each paint contractor,
including coordination with othertrades working on the highways.Communication and coordination with local
municipalities are addressed forstructures that span local streets.Contractor’s Liberty-Alpha Painting and ANKA
Painting.
Performed Automated Ultrasonic Testing (AUT):
 Reviewed & verified AUT systemverification documents and inspection personalqualifications.
 Verified all documentation to execute the work such as approved AUT procedures.
 Checked the AUT Calibrations (Cal. IN & Cal. OUT) as per the procedures.
 Performed online monitoring and evaluation of the scan result of Girth Welds Using Tomo Viewer.
 Witnessed & conducted inspection of AUT, MUT activities.
 Conducted a review of AUT and MUTdocuments to limit rejection of defective work.
UTV ENVIRONMENTAL & ENGINEERING CORP, BETHESDA, MD 2006 to 2009
CORROSION ENGINEERING CONSULTANT
Supervised leaking underground storage tanks removal, Painting, Coating and restoration.
 Inspected painting and coating application processes are carried out in accordance with approved
procedures & specification.
 Reviewed the painting and coating procedure. Verified and reviewed all onshore/offshore-related painting
and coating work that was carried out in accordance with the approved PQP and Inspection & Test plan.
 Ensured all documentation to execute the work such as approved painting and coating procedures, quality
control codes & standards are available at work site.
 Verified that all applicable equipment is calibrated and has valid certification.
PREVIOUS EXPERIENCE
LISN/Verizon Telecommunications.Design and installation 1998-2006
Nigeria National Petroleum Corperation. Pipeline installation, coating, tanks cleaning&maintenance.1978-1992
EDUCATION, TRAINING & CERTIFICATION
 BS Business Administration, William Paterson University, Wayne, NJ.
 Associate degree in small business management Passaic community college.
 Certified Advanced Ultrasonic Imaging First Map Engineer, National Association ofCorrosion Engineers
 National Association of Corrosion Engineers Level I Certified Coating Inspector(CIP-I)
 Coating and inspection training, NACE International, Houston,TX.
 Gartner Coatings training, Pearland, Texas.
 NACE International Eastern Area Conference Training.
 Training on pipelines, bridges, and highways.
 FIRSTMAP Training at Imperium Advanced Ultrasonic Imaging Maryland.
 Welding Inspector(AWS) Training
 OSHA Construction and safety training

4.  Traffic Construction Coordinator (TCC) Rutgers University, New Jersey
 The Society for Protective Coatings (SSPC - C3) Certified.