This document provides an overview of Shandong Huaruifeng Machinery Co., Ltd., a manufacturer of brake pads and other auto parts. It details the company's new multi-plant manufacturing facility with completed friction material, foundry, machining center, and agriculture equipment plants. It also discusses the company's product portfolio, testing facilities, formula systems, production capacity, quality control processes, and plans for expansion of production lines and tooling capabilities.

1. Shandong Huaruifeng Machinery Co., Ltd.
山东华瑞丰机械有限公司

2. Manufacturing plant Overview
New Multi-plant designed to have:
One friction material plant completed
One foundry completed
One Machining Center completed
One Agriculture Equipment Plant
completed
3 workshops in planning
20 Floor R&D Center in planning
220,000 Square Meters

3. Brief Introduction
Our headquarter Qingdao Huarui Auto Parts Co., Ltd. was
founded in 2001, as a leading manufacturer of brake and
Stamping &Welding Parts, mainly supplying OEM products for
Foton, SAIC-GM-Wuling etc.
In 2011 the group achieve the value of output 450 Million RMB
and Huarui stock company was established and planed to go
public in three years.
In September 2011 a new foundry, Machining Center & friction
material plant (Shandong Huaruifeng Machinery Co., Ltd.) was
founded, which makes the main component of brake assembly
produced independently by ourselves.
New Friction Material plant completed in June 2012
and launched to be in production in July, with
initial investment 60 Million RMB
Qingdao
Huarui
Auto Part
Co., Ltd.
Shandong
Huaruifen
g
Machinery
Co., Ltd.
Qingdao
Huaruifen
g
Machinery
Co., Ltd.
Qingdao
Furunde
Brake
System
Co., Ltd.
Friction
Material
Division
Foundry
Division
Machining
Center
Division
Agricultur
e
Equipment
Division

4. Product Portfolio---Qingdao Headquarter
Differential Shell Axle AssemlyDecelerator Shell
Brake Calliper Caliper BracketBrake Calliper

5. OEM Customers--Qingdao Headquarter

6. Main production line--Qingdao Headquarter
Tokyo Foundry Line Axle Assembly Line Korea Machining CenterBrake Assembly Line

7. Brake Pads for
Passenger Car
Brake Pads for Heavy
Duty Trucks
Brake Pads for
Commercial Vehicles
Wind Yaw
Brake Linings
Product Portfolio---HRF Friction Material Division

8. Our Team
With the strong support of Qingdao Headquarter, we has built our professional
management team:
※ Mr. Bai: Top Formula designer with more than 25 years experience in friction material field,
the formula he designed has been released to supply for VW, Chrysler, FORD , Bosch (OEM),
GM, Bendix, Centric, NAPA, Delphi(OES/AM)etc.
※ Mr. Ma Shian: Senior friction materaial engineer with more than 30 years experience in
friction material research, development, testing and technics.
※ Mr. Wang Yangshen: OEM Project Mananer for TRW, Ford, Bosch, Shanghai VW, Great Wall
etc
※ Mr. Tian Xiufu: Previous production manager from Xinyi, with more than 15 years experience
in brake pads and brake shoes production.
※ Mr. Chris Chao 10 years experience with Bendix, Autozone, Ford, NAPA, Brembo, Frasle etc.

9. Research and Development Center
Capabilities
Independent Development
Capability
Inertia, Compressibility test
Wind Yaw Testing
Low Pressure Wear Testing
Physical Property Testing

10. Testing Facility-1
Compressibility TestingInertia Testing Dyno Chase Testing Machine

11. Testing Facility-2
Wind Yaw Brake Testing Shear Testing Salt Spray Testing Hardness Testing

12. Testing Facility-3
Chemical Lab

13. R & D Center Planning In Qingdao
3900 Brake NVH Automotive Dynamometer 1620 Compressibility Test
Machine

14. R & D Center In Qingdao
2015 2016 2017 2018 2019Current Testing
Item Available
One Link 3000 Performance Dyno
One Link 1620 Compressibility Testing
5 staff
Investment 8,000,000 RMB
Electronic Microscope
X-ray Elemental Analyzer
Prototype Workshop
Leadtime 60 days (in house test completd)
10 staff Investment 10,000,000 RMB
One Link 3900 NVH Dyno
X-ray diffraction(XRD)
ICP-OES
20 staff Investment 20,000,000 RMB
Inertia Dyno Testing
Compressibility testing
Ambient Shear Testing
Hardness Testing
Chase Testing
Wind YawTesting
Complete the national R & D center in 5 year
with total investment 58 million RMB
Two Link 3000 Performance Dyno
30 staff
One Link Compressibility Test Machine
Investment 20,000,000 RMB

15. Formula System
Low-metallic European Market,
Middle East
Ceramic
NAO
Semi-metallic
Coper free Ceramic
High Coefficient Ceramic
N/A, S/A, Middle East, Asia-Pacific
Fleet and
Emergency Vehicle

16. Formula System
CeramicSemi-metallic
Formula Structure
Low-metallic Copper free formula
Economic
Media
Premium
Economic
Media
Premium
Economic
Media
Premium
HRF5118
HRF522
MF517 MF512
Economic
Media
Premium
HRF6382
CR618
CR609
HRF6386
HRF359
HRF340
HRF325
N/A, Asia Pacific Market
Passenger Car, truck and
commercial vehicles
N/A, Asia Pacific Market
Passenger Car
Europe, Middle East
Passenger Car
N/A, Europe Market
Passenger Car

17. Formula Characteristics
Formulati
on
HRF No. μ Noise Wear
Physical characteristics
Hardness
(HRS)
Compressibility
Ambient
(μm)
Shear Ambient
(MPa)
Semi-
metallic
HRF5118 0.30-0.35 ◎ ◎ 60±15 120±25 >3.0
MF517 0.30-0.38 ⊙ ◎ 60±20 100±30 >3.0
MF512 0.32-0.40 ○ ⊙ 60±20 90±30 >3.0
HRF522 0.30-0.35 ⊙ ◎ 60±20 80±30 >3.0
Ceramic
HRF6382 0.30-0.36 ◎ ◎ 50±15 150±25 >3.0
CR618 0.30-0.36 ⊙ ◎ 50±20 120±30 >3.0
HRF6386 0.35-0.42 ⊙ ⊙ 50±20 120±30 >3.0
CR609 0.32-0.38 ⊙ ○ 50±20 100±30 >3.0
Low-
metallic
HRF340 0.36-0.42 ◎ ◎ 50±20 120±30 >3.0
HRF325 0.32-0.40 ○ ⊙ 60±20 100±30 >3.0
◎Excellent ⊙Better ○Good

18. OE Experience Formula we have -1
2007 Jeep Wrangler (JK) Jeep Liberty (KA)
& Dodge Nitro (KK)
Formulations: HRF5118 Semi-Met

19. OE Experience Formula we have -2
N/A Ford Vehicles Designed formulas:
HRF5118& HRF6382

20. OE Experience Formula we have -3
High Friction Coefficient NAO:

21. OE Experience Formula we have -4
Domestic OE experience:
Geely GC-1 Front and Rear
Geely NL-1 Front and Rear
BYD M6 Front and Rear
BYD S6 Front and Rear
BYD E6 Front and Rear
JMC N350 Front and Rear
BYD F6 Front
BYD F6 Rear
BYD L3 Front
BYD L3 Rear

22. 100% Formula Design and Improvement Capability
HRF325 formula Stability Improvement

23. Formula Ingredient Analysis
Raw material
材料
Types of pad
类型 Front Application Rear
ApplicationSemi
Metallic
Low-metal Ceramic
Binder Resin树脂
Friction Dust摩擦剂
Filler充填料
Lubricant润滑剂
Abrasive
Metal Powder铸铁粉
Steel fiber钢棉
Brass & Copper
Aramid 芳纶浆泊
<Ingredient Volume>
Around 20vol%
Around 10vol%
Around 5vol%
Non

24. Formula Perfomance Analysis
Type of
pads
Items
Wear Noise
Semi Metallic
for Front
Low metal for Front
Ceramic for Front
Ceramic for Rear
ColdFriction
Fade
Judder
Vibration
Corrosion
HeatCrack
LowTemp.
HighTemp.
Squeal
Groan
Excellent
Good
Fair

25. Link Dyno Testing Report
Semi-metallic AK-Master Report HRF5118

26. Link Dyno Testing Report
Semi-metallic SAE J2521 Noise Report HRF5118

27. Link Dyno Testing Report
Ceramic AK-Master Report HRF6382

28. Link Dyno Testing Report
Ceramic SAE J2521 Noise Report HRF6382

29. Link Dyno Testing Report
Low-metallic SAE J2521 Noise Report HRF340

30. AASA Leafmarks Authorization

31. Quality Certificate: TS16949
Released :
July 3rd 2013

32. Quality Certificate: TS16949
PLANNING
PRODUCT DESIGN AND DEV.
Program
Approval
Prototype Pilot Launch
PLANNING
PROCESS DESIGN AND DEVELOPMENT
PRODUCT AND PROCESS VALIDATION
PRODUCTION
FEEDBACK ASSESSMENT AND CORRECTIVE ACTION
New Product Development Flow Chart

33. --Design for Assembly
--Design Verification
--Design Reviews
--Prototype Control Plan
--Engineering Drawings
--Engineering Specifications
--New Equipment/Tooling
--Gages/Testing Equipment
--Drawing and Specification
Changes
DFMEA
Prototype Build - Control Plan
Quality Certificate: TS16949
Production Development Course

34. Product Approval Process
supplier create
drawings and sumbit
Customer Engineering
submit product attribute
chart to supplier
Drawing reviewed by
customer engineering
Supplier rework drawings and
resumbit
Approved
kick off PPAP Process
Supplier run PPAP samples
and pkg
Supplier send samples and
PPAP pkg to customer
rework and resumbit
rework and resumbit
PSW Approved (Y or N)
Samples Approved (Y or N)
Customer review
samples and
PPAP pkg
Customer Engineering notify
Supply chain of PPAP
Approval
Yes
No
Yes
No
No
Yes
Yes

35. Quality Control Process Continuous Improvement
From the order input to output as well as shipment, we have been strictly following
the quality control as below:
√.Quality control are in strict accordance with the inspection standard and inspection plan and all
the testing are proceeded based on different batch and plan required. Currently we have built a
complete set of testing equipments to proceed the testing and assure the product quality in
control;
√. In the process of spraying glue, the glue thickness of back plate must be inspected to ensure
consistency for each part No., and further to ensure the shear force can meet the requirements.
√. The thickness of powder coating and powder adhesion has been inspected to ensure the
product appearance and the product dimension meeting the requirements.
√.All the product will be 100% following the final inspection to assure meeting customer technical
requirements such as dimension, technical status, marking and packing etc. Only after inspected
qualified ,the products can be get into the storage

36. Positive Mold Manufacturing Capability
Capacity
Currently 4 production lines
400 Ton Pressing Machine from
Taiwan, which stands the
highest level in China
Korea BT Automatic Grinding,
slot and Chamfer
BT Powder Coating line
Automatic Package line
Anual capacity 4.8 million sets

37. Production Capacity Analysis
Item Equipment Model Quantity Capacity
Current Production
Capacity
1
Ultrasonic washing
machine
HNX-5Z 2
1500PCS/each/ho
ur
Total Anucal Capacity
4,800,000 sets
Used Capcity 3,000,000 sets
Left Capcity 1,800,000 sets2
Automatic spray
drying line
HGJM-500 3
1500PCS/each/ho
ur
3
Hot pressing
machine
FC-400TON 36 90PCS/each/hour
4 Grinding Machine JF621D 4
1250PCS/each/ho
ur
5
Slot and Chamfer
Machine
FR4300 4
1250PCS/each/ho
ur
6 Powder Coating Line HM 4
1250PCS/each/ho
ur
7 Riveting Machine Jm12T 16
300PCS/each/hou
r
8 Shrink Wrap Machine BSF-5540 7
150sets/each/hou
r

38. New Production Line Kicking off
New production line from planning to mass production taking only 3 months:
Faclity already available: Warehouse, manufacturing plant, mixing line,testing facility
2 months: Key machine importing including Taiwan Hot pressing Machine, Automobile
slot, chamfer, power coating line
1 month: New faciltiy testing and adjusting
3 months: New Staff Training

39. Automatic assembly production line
Backing plate cleaning Spray Glue Hot-pressingSand blasting

40. Automatic assembly production line
Oven cure Powder Coating, Marking,
Package
Gringding, slot and Chamfer Scorching

41. Production Process Continuous Improvement
During the production process especially for the key process , we take serial effective control
measures to avoid mistakes and guarantee stable quality of the products:
※ For Mixing process, raw material input was controlled by barcode system, operators recheck the
weight during automatic weighing , third check for the finished mixed material etc,
※ Outsourcing back plate is required to proceed sand blasting first on our back plate supplier side and
inspected qualified before going to our storage. During production, the back plate will proceed sand
blasting again to get rid of the rust and ultrasonic cleaning to remove the oil.
※ In the process of hot pressing, the electronics scale must be inspected to ensure accuracy before
starting to scale the mixing material. And the mixing material must be flatted even to ensure the
consistency of hardness and density in different position of the friction material;
※ Products are placed on the shelf with different layers during oven cure process to ensure excellent air
circulation so that all the products are heated and cured evenly
※ Each machine has equipped with dust clean device during hot pressing, which can help saving
energy, protecting the environment as well as workers.

42. Automatic Mixing line

43. Automatic Mixing line
Barcode System & Key Material Input
Lot-trace ability 4 automatic Mixing Line
Computer Controlled System

44. Mixing Material First in First Out
Mixing Material First In Different Material Different
Converyor Belt
Mixing Material First Out

45. Hot Pressing
27 Hot Pressing
Machine
400 Ton Pressing
Machine from Taiwan
Automatic Dust Clean
Safety Grating
Exterior Insulation
Opertator Air
Conditioning System

46. 100 Positive Molded
100% Positive mold
50-100 new toolings per
month
Tooling Warehouse more
than 1300 Part No.

47. Computer Controlled Oven Cure
Layout in each layer
Each layer with Holes
Heat oven and
stability
Ambient Shear
Density
Hardness
Compressibility Testing

48. Grinding Slot Chamfer one Time(The second Line)
Lot-trace ability
Input
Output
Wide, Depth, Dimension, Angle,
Appreance etc.

49. Korea BT Automatic Line(The third Line)
Automatic Grinding, Slot and Chamfer
Automatic Powder Coating Line Marking, Riveting and Package
Transfer and Paint Control Panel

50. Positive Mold Tooling Plan
50-100 new toolings /month
1300 parts by the end of 2014
1500 parts by the end of 2015
July. -Dec. 2012: VW, Skoda, Audi, Roewe,Buick, Chevrolet, Chery
series
Jan - Jun. 2013: Toyota, Honda,Nissan, Subaru, Mazda,Mitsubishi,
Isuzu, Hyundai, Kia series
July.- Dec 2013: Cadilac, Ford, Jeep, Land rover, Volvo, Hummer
series
Jan. -Jun. 2014: Mercedes-Benz, BMW, Porsche, Jaguar, Lincon,
Chrysler, Dodge series
July.-Dec. 2014: Opel, Peugeot, Citroen, Fiat, JAC, Great wall

51. Product Range for Different Market
North America Market: More than 1000 FMSI# for all kind of vehicles and nearlly covering
all the most popular parts
Australia Market: 460 DB# covering nearlly 90% of the Market
Domestic China Market: 628 Parts covering more than 90% of the domestic market
European Market: nearlly 500 part No. and planning ECE R90 Cerificate for 300 parts
Middle East: 200 parts for most popular vehicles

52. ERP SYSTEM
ERP
Purchasing Storage
Production Distribution
Accessories Warehouse
Raw Material warehouse

53. Tooling Capability-software
AUTOCAD UG Pro-E-Wildfire

54. OEM Shim
0EM shim coil from Wolverine, MSC, Nichias, trelleborg

55. Abutment kits
Abutrment kits can be sourced from Anstro, IBI
Similar material produced in China with 20% cost less, and shorter lead time

56. Capabiltiy for Brake Shoe and Increasing Market
The company has strong financial background and adequate production capacity, we can expand
production capacity according to the market demand and meanwhlie increase our products
range to provide customers better service.
A, Annual 800,000 sets brake shoe production line has been kicked off mass production by Feb
2016.
B, CV brake pads has more than 20 part No. by now, we can kick off the new toolings according
to the customer demand, and if the market share is big we will invest a new production line
specially for CV brake pads.
C, Wind Yaw Brake take the rate of 70% in the domestic OE market like Gold wind, GKN etc. With
the high quality products with no noise and long life as well as better service we are becoming
the No.1 Wind Yaw brake manufacturer in China
D, Company has about 40,000 square meters pending for the new workshop, we can ensure the
sufficient production plant and capacity to meet increasing market demand.

57. THANK YOU
FOR YOUR ATTENTION!