How to avoid 5 critical mistakes in CLIA manufacturing
•Download as PPTX, PDF•
0 likes•21,546 views
This document discusses 5 critical mistakes companies commonly make when using biomagnetic separation in manufacturing clinical diagnostic kits. It explains that the key parameter for defining a biomagnetic separation process is the magnetic field gradient, not functional parameters like separation time or volume. Downloading the attached presentation reveals the 5 mistakes and how to properly specify a process based on the magnetic field gradient.
Report
Share
Report
Share
Recommended
Failure Mode & Effects Analysis (FMEA)
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Failure Mode & Effects Analysis (FMEA) is a step-by-step approach for identifying all possible failures in a design, a manufacturing or assembly process, or a product or service. The purpose of the FMEA is to take actions to eliminate or reduce failures, starting with the highest-priority ones. FMEA also documents current knowledge and actions about the risks of failures, for use in continuous improvement.
In this training presentation, you can teach your employees on the proper steps to construct an FMEA for a design or process, and then implement action plans to eliminate or reduce the risks of potential failures.
LEARNING OBJECTIVES
1. Understand what an FMEA is, why it is used, and when can it be deployed
2. Understand the definitions, scoring system and calculations used in an FMEA
3. Learn the steps to developing an FMEA and the pitfalls to avoid
CONTENTS
1. Introduction to FMEA
2. FMEA: Definitions, Scoring System & Calculations
3. FMEA Procedure
4. FMEA Example
Birmingham apcs
This document discusses Failure Mode and Effects Analysis (FMEA). It begins by welcoming the audience in multiple languages and introducing the Advanced Powertrain Control Symposium topic of effectively applying FMEA. The document then defines FMEA, explains its origins and purpose, and discusses how to structure an effective FMEA process through cross-functional teams, facilitation, documentation, and risk analysis. It emphasizes using a logical structured approach and dedicated software to efficiently construct failure scenarios and analyze their risks and potential solutions.
Failure Reporting, Analysis, Corrective Action System
FRACAS: A method of analyzing the failure codes assigned to the individual work orders and identifying common themes and trends. The root cause of the high impact items are determined, with a corrective action identified and executed to prevent reoccurrence of the issue.
PR.AW.02.pdf
The document discusses how the PackML standard and OEE (Overall Equipment Effectiveness) can work together to improve manufacturing line performance. PackML provides a common framework for machine control programming and data collection across a production line. This allows OEE metrics like performance, quality and machine availability to be accurately measured and compared. Identifying bottlenecks through OEE analysis can then help optimize the line. The standardization of PackML makes data collection and OEE monitoring more consistent, helping manufacturers improve efficiency.
Six Weeks Internship
This document summarizes a six-week internship report on improving lock-out tag-out work instructions to embed safety culture at a site. It includes sections on the Indian confectionery market, company profile, major products, the ESH department, lock-out tag-out procedures and requirements, a survey of lock-out tag-out knowledge, research methodology, findings from preparing lock-out tag-out standard operating procedures and from the survey, and recommendations.
Bilcare corporate presentation
Bilcare is an organization made up of motivated people, who believe in going that extra mile to spread excellence and joy. This is a global leader and an innovation-led packaging solutions provider that partners with the pharmaceutical industry to improve patient healthcare outcomes.
Failure Modes and Effect Analysis (FMEA)
The ultimate guide on constructing a FMEA process for Manufacturing, Maintenance, Services and Design.
The presentation include step by step on how to determine the failure modes, failure effects, assign severity, assign occurrence, assign detection, calculate risk priority numbers and prioritize the RPNs for action. With some examples and illustrations.
Presentation contents:
1. Determing failure modes, effects and causes.
2. FMEA team & team leader.
3. Brainstorming.
4. The basic steps of FMEA.
5. Examples.
Precision Maintenance Presentation
Precision Maintenance is talked about in many companies and implemented at many companies, many with great success, however most companies do not understand Precision Maintenance. In this presentation I clear up some misconceptions and untruths concerning it.
Recommended
Failure Mode & Effects Analysis (FMEA)
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Failure Mode & Effects Analysis (FMEA) is a step-by-step approach for identifying all possible failures in a design, a manufacturing or assembly process, or a product or service. The purpose of the FMEA is to take actions to eliminate or reduce failures, starting with the highest-priority ones. FMEA also documents current knowledge and actions about the risks of failures, for use in continuous improvement.
In this training presentation, you can teach your employees on the proper steps to construct an FMEA for a design or process, and then implement action plans to eliminate or reduce the risks of potential failures.
LEARNING OBJECTIVES
1. Understand what an FMEA is, why it is used, and when can it be deployed
2. Understand the definitions, scoring system and calculations used in an FMEA
3. Learn the steps to developing an FMEA and the pitfalls to avoid
CONTENTS
1. Introduction to FMEA
2. FMEA: Definitions, Scoring System & Calculations
3. FMEA Procedure
4. FMEA Example
Birmingham apcs
This document discusses Failure Mode and Effects Analysis (FMEA). It begins by welcoming the audience in multiple languages and introducing the Advanced Powertrain Control Symposium topic of effectively applying FMEA. The document then defines FMEA, explains its origins and purpose, and discusses how to structure an effective FMEA process through cross-functional teams, facilitation, documentation, and risk analysis. It emphasizes using a logical structured approach and dedicated software to efficiently construct failure scenarios and analyze their risks and potential solutions.
Failure Reporting, Analysis, Corrective Action System
FRACAS: A method of analyzing the failure codes assigned to the individual work orders and identifying common themes and trends. The root cause of the high impact items are determined, with a corrective action identified and executed to prevent reoccurrence of the issue.
PR.AW.02.pdf
The document discusses how the PackML standard and OEE (Overall Equipment Effectiveness) can work together to improve manufacturing line performance. PackML provides a common framework for machine control programming and data collection across a production line. This allows OEE metrics like performance, quality and machine availability to be accurately measured and compared. Identifying bottlenecks through OEE analysis can then help optimize the line. The standardization of PackML makes data collection and OEE monitoring more consistent, helping manufacturers improve efficiency.
Six Weeks Internship
This document summarizes a six-week internship report on improving lock-out tag-out work instructions to embed safety culture at a site. It includes sections on the Indian confectionery market, company profile, major products, the ESH department, lock-out tag-out procedures and requirements, a survey of lock-out tag-out knowledge, research methodology, findings from preparing lock-out tag-out standard operating procedures and from the survey, and recommendations.
Bilcare corporate presentation
Bilcare is an organization made up of motivated people, who believe in going that extra mile to spread excellence and joy. This is a global leader and an innovation-led packaging solutions provider that partners with the pharmaceutical industry to improve patient healthcare outcomes.
Failure Modes and Effect Analysis (FMEA)
The ultimate guide on constructing a FMEA process for Manufacturing, Maintenance, Services and Design.
The presentation include step by step on how to determine the failure modes, failure effects, assign severity, assign occurrence, assign detection, calculate risk priority numbers and prioritize the RPNs for action. With some examples and illustrations.
Presentation contents:
1. Determing failure modes, effects and causes.
2. FMEA team & team leader.
3. Brainstorming.
4. The basic steps of FMEA.
5. Examples.
Precision Maintenance Presentation
Precision Maintenance is talked about in many companies and implemented at many companies, many with great success, however most companies do not understand Precision Maintenance. In this presentation I clear up some misconceptions and untruths concerning it.
Failure mode effect analysis
This document provides an overview of failure mode and effects analysis (FMEA). It defines key terms like failure mode and effects analysis. It explains that FMEA is a process to identify all possible product failures and their consequences. The document notes that FMEA helps prevent problems, reduce costs, and improve customer satisfaction. It outlines the resources, process, types of FMEA, advantages, and limitations of FMEA.
KPI Users Group - Failure Reports
At the end of the year or month what reports would you like to see from your CMMS/EAM? Would you like a few failure reports? Check out this presentation. It may make your day.
Df Maint Tutorial
Design for maintainability (DFMaint) aims to make products easy and cost-effective to maintain and repair. It reduces downtime, maintenance costs, and inventory needs. DFMaint considers maintainability early in the design process through a closed-loop approach involving data analysis, maintenance issue prioritization, design incorporation, testing and improvement. Key features include easy component access and replacement using standard tools. Metrics like repair frequency and costs are used to measure DFMaint success. An example overhauled locomotive designs to meet emissions standards while improving maintainability.
geaazrhszegsr wrrathet eTETR Etrsfe deaFddaewe te3thr esesSEeee
This document provides an overview of mistake proofing and poka yoke techniques. It begins with definitions of mistake proofing and poka yoke, noting they aim to prevent errors or their negative impact through process or design features. Everyday examples of mistake proofing in common products are then shown. Evidence is presented that mistake proofing can significantly reduce defects, increase productivity, and lower costs. The document concludes by discussing different types of inspections and how mistake proofing fits within quality improvement efforts.
NERC CIP - Top Testing & Compliance Challenges, How to Address Them
The North American Electric Reliability Corporation's (NERC) Critical Infrastructure Protection plan is a set of requirements designed to secure the assets required for operating North America's bulk electric system. In this webinar, we will discuss the key challenges in testing and compliance with NERC-CIP and highlight best practices to comprehensively address these challenges. We will dedicate a portion of our conversation to discussing the tools and technology that can help increase the effectiveness of your NERC-CIP compliance efforts.
Step FWD IT - BNI SlideDeck
Step FWD // IT provides managed IT services, cloud solutions, disaster recovery, and on-premises support to help businesses reduce costs and risks from unexpected IT failures while improving productivity through a proven approach of reliable, available, and high-performing networks, systems, and applications. Their services include IT managed services, cloud SAAS and IAAS, and disaster recovery planning and testing to ensure critical systems, applications, data, and uptime requirements are protected.
EMC GLOBAL DATA PROTECTION INDEX
KEY FINDINGS & RESULTS FOR AMERICAS - GLOBALLY, ENTERPRISES ARE LOSING AS MUCH AS $1.7 TRILLION THROUGH DATA LOSS AND UNPLANNED DOWNTIME
Managing mill maintenance - Maintenance options and challenges
This document provides a summary of an article from the March/April 2013 issue of Grain & Feed Milling Technology magazine about managing mill maintenance. It discusses the importance of maintenance for mill operations and product quality. Different maintenance approaches like preventative, predictive, and reliability-centered maintenance are described. The benefits of maintenance include avoiding breakdowns, improving equipment efficiency, and workplace safety. Effective maintenance requires planning and balancing scheduled repairs with emergencies. Computer software can help track maintenance programs.
TPM: Quality Maintenance (Hinshitsu Hozen)
Quality Maintenance is an "advanced" pillar of TPM and aims to assure zero defect conditions. Also known as Hinshitsu Hozen in Japanese, it does this by understanding and controlling the process interactions between the 4Ms - manpower, material, machines and methods that could enable defects to occur. The key is to prevent defects from being produced in the first place, rather than screening them out through inspection systems after they have been produced. Controlling quality through its causes is the essence of Quality Maintenance.
Developed by our JIPM-certified TPM Instructor, this presentation teaches the key concepts, principles and philosophy of Quality Maintenance, the 4M conditions that are essential for defect-free production, as well as the step-by-step process for Quality Maintenance.
LEARNING OBJECTIVES
1. Understand the key concepts, principles and philosophy of Quality Maintenance
2. Acquire knowledge on the 4M conditions and the prerequisites for promoting Quality Maintenance
3. Describe the 8-step process of Quality Maintenance and the key analytical tools and techniques
CONTENTS
1. Key Concepts & Philosophy of Quality Maintenance
2. 4M Conditions - The Determinants of Quality
3. The 8 Steps of Quality Maintenance
4. Key Tools & Techniques for Quality Maintenance
5. Towards Excellence in Quality Maintenance
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations
Maintenance101_for_Linkedin
This document outlines the fundamentals of an effective maintenance program. It discusses key aspects such as viewing maintenance as part of the manufacturing process, having clear roles and responsibilities, keeping equipment clean, using a maintenance management system to track work, developing maintenance strategies based on equipment criticality and failure modes, fixing breakdowns quickly using problem analysis, and ensuring maintenance staff have high skills and perform quality work.
Guidelines for Choosing and Implementing a Machine Vision System
This White Paper describes different options and scenarios to be considered when choosing or implementing a machine vision system, and alerts for keys factors that maximize its success.
Implementing effective preventive and predictive maintenance programs
The document discusses implementing effective preventive and predictive maintenance programs. It covers various maintenance strategies including reactive, preventive, predictive, reliability-centered, and total productive maintenance. Key aspects of developing a preventive maintenance program are discussed such as performing a feasibility analysis, establishing time-based or dynamic-based schedules, and calculating overall equipment effectiveness. The document provides an overview of setting up an effective maintenance program.
Product discovery engineering point of view
A product team with excellent product discovery habits have a tremendous competitive advantage.
As a Product Manager, you must involve the developers in the continuous product discovery process. Learn how to leverage technology and team organization and practices to facilitate this learning process.
Why every team needs Product Discovery
Build and maintain software is very costly and is a liability to minimize. Product Discovery allows us to be efficient and put the focus on building the right thing.
Real product teams
Empowered engineers are the best single source for innovation and product discovery.
Our systems should facilitate Product Discovery.
The design and architecture of anything we build should be optimized for learning and discovery.
Bio Summit
The document discusses Accugenix's value proposition as a provider of microbial identification testing services. It outlines intangible benefits to stakeholders like quality, safety, risk management, and financial benefits. It also discusses how accurate microbial identification can help companies manage risk, track trends, make better decisions, and avoid issues like plant shutdowns or FDA warnings. Finally, it summarizes Accugenix's service offerings and how their proprietary methods and large validated library can provide high quality identifications at a lower cost than other options.
What is quality management system
A quality management system (QMS) aims to reduce damage to processes and products by ensuring repeatability through implementing process controls. While safety and environmental management systems are required by law, a QMS is implemented voluntarily to assure customers of product integrity and quality. All management systems, including a QMS, ultimately aim to protect people and the planet through prevention and continual improvement. A successful QMS depends on people implementing, using, and controlling the system processes.
Detailed Project Report on Setting up a Ethylene Vinyl Acetate (EVA) Manufact...
The report provides a complete roadmap for setting up an ethylene vinyl acetate (eva) manufacturing plant. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
More Info:- https://www.imarcgroup.com/ethylene-vinyl-acetate-manufacturing-plant-project-report
Lemongrass Processing Plant Project Report.pptx
Lemongrass is a tropical herb known for its long, slender stalks and fresh citrus scent. It is a prominent ingredient in various culinary traditions. The characteristics of lemongrass include its pale green stalks and sharp, lemony fragrance, which infuses a unique flavor in dishes. The taste of lemongrass is a complex blend of lemon zest and a slightly minty undertone.
Setting Up a Successful Apricot Kernel Oil Processing Unit: DPR
The report provides a complete roadmap for setting up an apricot kernel oil processing plant. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
More Info:- https://www.imarcgroup.com/apricot-kernel-oil-processing-plant-project-report
reliabilitycenteredmaintenancemadesimple.pdf
This document provides an introduction to Reliability Centered Maintenance (RCM) and the RCMBlitzTM process. RCM is a structured method for developing maintenance plans through analyzing potential failure modes and their effects. The RCMBlitzTM process involves 7 steps: 1) listing asset functions, 2) potential functional failures, 3) failure modes and probabilities, 4) failure effects, 5) consequence categories, 6) selecting maintenance tasks, and 7) assessing spare parts needs. Applying RCM helps reduce costs and improve asset reliability through preventative and predictive maintenance tasks.
Setting Up a Successful Diethylene Glycol Monobutyl Ether Manufacturing Unit:...
The report provides a complete roadmap for setting up an diethylene glycol monobutyl ether manufacturing plant. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
More Info:- https://www.imarcgroup.com/diethylene-glycol-monobutyl-ether-manufacturing-plant-project-report
(June 12, 2024) Webinar: Development of PET theranostics targeting the molecu...
(June 12, 2024) Webinar: Development of PET theranostics targeting the molecu...Scintica Instrumentation
Targeting Hsp90 and its pathogen Orthologs with Tethered Inhibitors as a Diagnostic and Therapeutic Strategy for cancer and infectious diseases with Dr. Timothy Haystead.More Related Content
Similar to How to avoid 5 critical mistakes in CLIA manufacturing
Failure mode effect analysis
This document provides an overview of failure mode and effects analysis (FMEA). It defines key terms like failure mode and effects analysis. It explains that FMEA is a process to identify all possible product failures and their consequences. The document notes that FMEA helps prevent problems, reduce costs, and improve customer satisfaction. It outlines the resources, process, types of FMEA, advantages, and limitations of FMEA.
KPI Users Group - Failure Reports
At the end of the year or month what reports would you like to see from your CMMS/EAM? Would you like a few failure reports? Check out this presentation. It may make your day.
Df Maint Tutorial
Design for maintainability (DFMaint) aims to make products easy and cost-effective to maintain and repair. It reduces downtime, maintenance costs, and inventory needs. DFMaint considers maintainability early in the design process through a closed-loop approach involving data analysis, maintenance issue prioritization, design incorporation, testing and improvement. Key features include easy component access and replacement using standard tools. Metrics like repair frequency and costs are used to measure DFMaint success. An example overhauled locomotive designs to meet emissions standards while improving maintainability.
geaazrhszegsr wrrathet eTETR Etrsfe deaFddaewe te3thr esesSEeee
This document provides an overview of mistake proofing and poka yoke techniques. It begins with definitions of mistake proofing and poka yoke, noting they aim to prevent errors or their negative impact through process or design features. Everyday examples of mistake proofing in common products are then shown. Evidence is presented that mistake proofing can significantly reduce defects, increase productivity, and lower costs. The document concludes by discussing different types of inspections and how mistake proofing fits within quality improvement efforts.
NERC CIP - Top Testing & Compliance Challenges, How to Address Them
The North American Electric Reliability Corporation's (NERC) Critical Infrastructure Protection plan is a set of requirements designed to secure the assets required for operating North America's bulk electric system. In this webinar, we will discuss the key challenges in testing and compliance with NERC-CIP and highlight best practices to comprehensively address these challenges. We will dedicate a portion of our conversation to discussing the tools and technology that can help increase the effectiveness of your NERC-CIP compliance efforts.
Step FWD IT - BNI SlideDeck
Step FWD // IT provides managed IT services, cloud solutions, disaster recovery, and on-premises support to help businesses reduce costs and risks from unexpected IT failures while improving productivity through a proven approach of reliable, available, and high-performing networks, systems, and applications. Their services include IT managed services, cloud SAAS and IAAS, and disaster recovery planning and testing to ensure critical systems, applications, data, and uptime requirements are protected.
EMC GLOBAL DATA PROTECTION INDEX
KEY FINDINGS & RESULTS FOR AMERICAS - GLOBALLY, ENTERPRISES ARE LOSING AS MUCH AS $1.7 TRILLION THROUGH DATA LOSS AND UNPLANNED DOWNTIME
Managing mill maintenance - Maintenance options and challenges
This document provides a summary of an article from the March/April 2013 issue of Grain & Feed Milling Technology magazine about managing mill maintenance. It discusses the importance of maintenance for mill operations and product quality. Different maintenance approaches like preventative, predictive, and reliability-centered maintenance are described. The benefits of maintenance include avoiding breakdowns, improving equipment efficiency, and workplace safety. Effective maintenance requires planning and balancing scheduled repairs with emergencies. Computer software can help track maintenance programs.
TPM: Quality Maintenance (Hinshitsu Hozen)
Quality Maintenance is an "advanced" pillar of TPM and aims to assure zero defect conditions. Also known as Hinshitsu Hozen in Japanese, it does this by understanding and controlling the process interactions between the 4Ms - manpower, material, machines and methods that could enable defects to occur. The key is to prevent defects from being produced in the first place, rather than screening them out through inspection systems after they have been produced. Controlling quality through its causes is the essence of Quality Maintenance.
Developed by our JIPM-certified TPM Instructor, this presentation teaches the key concepts, principles and philosophy of Quality Maintenance, the 4M conditions that are essential for defect-free production, as well as the step-by-step process for Quality Maintenance.
LEARNING OBJECTIVES
1. Understand the key concepts, principles and philosophy of Quality Maintenance
2. Acquire knowledge on the 4M conditions and the prerequisites for promoting Quality Maintenance
3. Describe the 8-step process of Quality Maintenance and the key analytical tools and techniques
CONTENTS
1. Key Concepts & Philosophy of Quality Maintenance
2. 4M Conditions - The Determinants of Quality
3. The 8 Steps of Quality Maintenance
4. Key Tools & Techniques for Quality Maintenance
5. Towards Excellence in Quality Maintenance
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations
Maintenance101_for_Linkedin
This document outlines the fundamentals of an effective maintenance program. It discusses key aspects such as viewing maintenance as part of the manufacturing process, having clear roles and responsibilities, keeping equipment clean, using a maintenance management system to track work, developing maintenance strategies based on equipment criticality and failure modes, fixing breakdowns quickly using problem analysis, and ensuring maintenance staff have high skills and perform quality work.
Guidelines for Choosing and Implementing a Machine Vision System
This White Paper describes different options and scenarios to be considered when choosing or implementing a machine vision system, and alerts for keys factors that maximize its success.
Implementing effective preventive and predictive maintenance programs
The document discusses implementing effective preventive and predictive maintenance programs. It covers various maintenance strategies including reactive, preventive, predictive, reliability-centered, and total productive maintenance. Key aspects of developing a preventive maintenance program are discussed such as performing a feasibility analysis, establishing time-based or dynamic-based schedules, and calculating overall equipment effectiveness. The document provides an overview of setting up an effective maintenance program.
Product discovery engineering point of view
A product team with excellent product discovery habits have a tremendous competitive advantage.
As a Product Manager, you must involve the developers in the continuous product discovery process. Learn how to leverage technology and team organization and practices to facilitate this learning process.
Why every team needs Product Discovery
Build and maintain software is very costly and is a liability to minimize. Product Discovery allows us to be efficient and put the focus on building the right thing.
Real product teams
Empowered engineers are the best single source for innovation and product discovery.
Our systems should facilitate Product Discovery.
The design and architecture of anything we build should be optimized for learning and discovery.
Bio Summit
The document discusses Accugenix's value proposition as a provider of microbial identification testing services. It outlines intangible benefits to stakeholders like quality, safety, risk management, and financial benefits. It also discusses how accurate microbial identification can help companies manage risk, track trends, make better decisions, and avoid issues like plant shutdowns or FDA warnings. Finally, it summarizes Accugenix's service offerings and how their proprietary methods and large validated library can provide high quality identifications at a lower cost than other options.
What is quality management system
A quality management system (QMS) aims to reduce damage to processes and products by ensuring repeatability through implementing process controls. While safety and environmental management systems are required by law, a QMS is implemented voluntarily to assure customers of product integrity and quality. All management systems, including a QMS, ultimately aim to protect people and the planet through prevention and continual improvement. A successful QMS depends on people implementing, using, and controlling the system processes.
Detailed Project Report on Setting up a Ethylene Vinyl Acetate (EVA) Manufact...
The report provides a complete roadmap for setting up an ethylene vinyl acetate (eva) manufacturing plant. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
More Info:- https://www.imarcgroup.com/ethylene-vinyl-acetate-manufacturing-plant-project-report
Lemongrass Processing Plant Project Report.pptx
Lemongrass is a tropical herb known for its long, slender stalks and fresh citrus scent. It is a prominent ingredient in various culinary traditions. The characteristics of lemongrass include its pale green stalks and sharp, lemony fragrance, which infuses a unique flavor in dishes. The taste of lemongrass is a complex blend of lemon zest and a slightly minty undertone.
Setting Up a Successful Apricot Kernel Oil Processing Unit: DPR
The report provides a complete roadmap for setting up an apricot kernel oil processing plant. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
More Info:- https://www.imarcgroup.com/apricot-kernel-oil-processing-plant-project-report
reliabilitycenteredmaintenancemadesimple.pdf
This document provides an introduction to Reliability Centered Maintenance (RCM) and the RCMBlitzTM process. RCM is a structured method for developing maintenance plans through analyzing potential failure modes and their effects. The RCMBlitzTM process involves 7 steps: 1) listing asset functions, 2) potential functional failures, 3) failure modes and probabilities, 4) failure effects, 5) consequence categories, 6) selecting maintenance tasks, and 7) assessing spare parts needs. Applying RCM helps reduce costs and improve asset reliability through preventative and predictive maintenance tasks.
Setting Up a Successful Diethylene Glycol Monobutyl Ether Manufacturing Unit:...
The report provides a complete roadmap for setting up an diethylene glycol monobutyl ether manufacturing plant. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
More Info:- https://www.imarcgroup.com/diethylene-glycol-monobutyl-ether-manufacturing-plant-project-report
Similar to How to avoid 5 critical mistakes in CLIA manufacturing (20)
geaazrhszegsr wrrathet eTETR Etrsfe deaFddaewe te3thr esesSEeee
geaazrhszegsr wrrathet eTETR Etrsfe deaFddaewe te3thr esesSEeee
NERC CIP - Top Testing & Compliance Challenges, How to Address Them
NERC CIP - Top Testing & Compliance Challenges, How to Address Them
Managing mill maintenance - Maintenance options and challenges
Managing mill maintenance - Maintenance options and challenges
Guidelines for Choosing and Implementing a Machine Vision System
Guidelines for Choosing and Implementing a Machine Vision System
Implementing effective preventive and predictive maintenance programs
Implementing effective preventive and predictive maintenance programs
Detailed Project Report on Setting up a Ethylene Vinyl Acetate (EVA) Manufact...
Detailed Project Report on Setting up a Ethylene Vinyl Acetate (EVA) Manufact...
Setting Up a Successful Apricot Kernel Oil Processing Unit: DPR
Setting Up a Successful Apricot Kernel Oil Processing Unit: DPR
Setting Up a Successful Diethylene Glycol Monobutyl Ether Manufacturing Unit:...
Setting Up a Successful Diethylene Glycol Monobutyl Ether Manufacturing Unit:...
Recently uploaded
(June 12, 2024) Webinar: Development of PET theranostics targeting the molecu...
(June 12, 2024) Webinar: Development of PET theranostics targeting the molecu...Scintica Instrumentation
Targeting Hsp90 and its pathogen Orthologs with Tethered Inhibitors as a Diagnostic and Therapeutic Strategy for cancer and infectious diseases with Dr. Timothy Haystead.Farming systems analysis: what have we learnt?.pptx
Presentation given at the official farewell of Prof Ken Gillet at Wageningen on 13 June 2024
Immersive Learning That Works: Research Grounding and Paths Forward
We will metaverse into the essence of immersive learning, into its three dimensions and conceptual models. This approach encompasses elements from teaching methodologies to social involvement, through organizational concerns and technologies. Challenging the perception of learning as knowledge transfer, we introduce a 'Uses, Practices & Strategies' model operationalized by the 'Immersive Learning Brain' and ‘Immersion Cube’ frameworks. This approach offers a comprehensive guide through the intricacies of immersive educational experiences and spotlighting research frontiers, along the immersion dimensions of system, narrative, and agency. Our discourse extends to stakeholders beyond the academic sphere, addressing the interests of technologists, instructional designers, and policymakers. We span various contexts, from formal education to organizational transformation to the new horizon of an AI-pervasive society. This keynote aims to unite the iLRN community in a collaborative journey towards a future where immersive learning research and practice coalesce, paving the way for innovative educational research and practice landscapes.
The binding of cosmological structures by massless topological defects
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
CLASS 12th CHEMISTRY SOLID STATE ppt (Animated)
Description:
Dive into the fascinating realm of solid-state physics with our meticulously crafted online PowerPoint presentation. This immersive educational resource offers a comprehensive exploration of the fundamental concepts, theories, and applications within the realm of solid-state physics.
From crystalline structures to semiconductor devices, this presentation delves into the intricate principles governing the behavior of solids, providing clear explanations and illustrative examples to enhance understanding. Whether you're a student delving into the subject for the first time or a seasoned researcher seeking to deepen your knowledge, our presentation offers valuable insights and in-depth analyses to cater to various levels of expertise.
Key topics covered include:
Crystal Structures: Unravel the mysteries of crystalline arrangements and their significance in determining material properties.
Band Theory: Explore the electronic band structure of solids and understand how it influences their conductive properties.
Semiconductor Physics: Delve into the behavior of semiconductors, including doping, carrier transport, and device applications.
Magnetic Properties: Investigate the magnetic behavior of solids, including ferromagnetism, antiferromagnetism, and ferrimagnetism.
Optical Properties: Examine the interaction of light with solids, including absorption, reflection, and transmission phenomena.
With visually engaging slides, informative content, and interactive elements, our online PowerPoint presentation serves as a valuable resource for students, educators, and enthusiasts alike, facilitating a deeper understanding of the captivating world of solid-state physics. Explore the intricacies of solid-state materials and unlock the secrets behind their remarkable properties with our comprehensive presentation.
Alternate Wetting and Drying - Climate Smart Agriculture
Alternate Wetting and Drying - Climate Smart AgricultureInternational Food Policy Research Institute- South Asia Office
PPT on Alternate Wetting and Drying presented at the three-day 'Training and Validation Workshop on Modules of Climate Smart Agriculture (CSA) Technologies in South Asia' workshop on April 22, 2024. JAMES WEBB STUDY THE MASSIVE BLACK HOLE SEEDS
The pathway(s) to seeding the massive black holes (MBHs) that exist at the heart of galaxies in the present and distant Universe remains an unsolved problem. Here we categorise, describe and quantitatively discuss the formation pathways of both light and heavy seeds. We emphasise that the most recent computational models suggest that rather than a bimodal-like mass spectrum between light and heavy seeds with light at one end and heavy at the other that instead a continuum exists. Light seeds being more ubiquitous and the heavier seeds becoming less and less abundant due the rarer environmental conditions required for their formation. We therefore examine the different mechanisms that give rise to different seed mass spectrums. We show how and why the mechanisms that produce the heaviest seeds are also among the rarest events in the Universe and are hence extremely unlikely to be the seeds for the vast majority of the MBH population. We quantify, within the limits of the current large uncertainties in the seeding processes, the expected number densities of the seed mass spectrum. We argue that light seeds must be at least 103 to 105 times more numerous than heavy seeds to explain the MBH population as a whole. Based on our current understanding of the seed population this makes heavy seeds (Mseed > 103 M⊙) a significantly more likely pathway given that heavy seeds have an abundance pattern than is close to and likely in excess of 10−4 compared to light seeds. Finally, we examine the current state-of-the-art in numerical calculations and recent observations and plot a path forward for near-future advances in both domains.
Randomised Optimisation Algorithms in DAPHNE
Slides from talk:
Aleš Zamuda: Randomised Optimisation Algorithms in DAPHNE .
Austrian-Slovenian HPC Meeting 2024 – ASHPC24, Seeblickhotel Grundlsee in Austria, 10–13 June 2024
https://ashpc.eu/
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Ozturkcan, S., Berndt, A., & Angelakis, A. (2024). Mending clothing to support sustainable fashion. Presented at the 31st Annual Conference by the Consortium for International Marketing Research (CIMaR), 10-13 Jun 2024, University of Gävle, Sweden.
快速办理(UAM毕业证书)马德里自治大学毕业证学位证一模一样
学校原件一模一样【微信：741003700 】《(UAM毕业证书)马德里自治大学毕业证学位证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Evidence of Jet Activity from the Secondary Black Hole in the OJ 287 Binary S...
Wereport the study of a huge optical intraday flare on 2021 November 12 at 2 a.m. UT in the blazar OJ287. In the binary black hole model, it is associated with an impact of the secondary black hole on the accretion disk of the primary. Our multifrequency observing campaign was set up to search for such a signature of the impact based on a prediction made 8 yr earlier. The first I-band results of the flare have already been reported by Kishore et al. (2024). Here we combine these data with our monitoring in the R-band. There is a big change in the R–I spectral index by 1.0 ±0.1 between the normal background and the flare, suggesting a new component of radiation. The polarization variation during the rise of the flare suggests the same. The limits on the source size place it most reasonably in the jet of the secondary BH. We then ask why we have not seen this phenomenon before. We show that OJ287 was never before observed with sufficient sensitivity on the night when the flare should have happened according to the binary model. We also study the probability that this flare is just an oversized example of intraday variability using the Krakow data set of intense monitoring between 2015 and 2023. We find that the occurrence of a flare of this size and rapidity is unlikely. In machine-readable Tables 1 and 2, we give the full orbit-linked historical light curve of OJ287 as well as the dense monitoring sample of Krakow.
The debris of the ‘last major merger’ is dynamically young
The Milky Way’s (MW) inner stellar halo contains an [Fe/H]-rich component with highly eccentric orbits, often referred to as the
‘last major merger.’ Hypotheses for the origin of this component include Gaia-Sausage/Enceladus (GSE), where the progenitor
collided with the MW proto-disc 8–11 Gyr ago, and the Virgo Radial Merger (VRM), where the progenitor collided with the
MW disc within the last 3 Gyr. These two scenarios make different predictions about observable structure in local phase space,
because the morphology of debris depends on how long it has had to phase mix. The recently identified phase-space folds in Gaia
DR3 have positive caustic velocities, making them fundamentally different than the phase-mixed chevrons found in simulations
at late times. Roughly 20 per cent of the stars in the prograde local stellar halo are associated with the observed caustics. Based
on a simple phase-mixing model, the observed number of caustics are consistent with a merger that occurred 1–2 Gyr ago.
We also compare the observed phase-space distribution to FIRE-2 Latte simulations of GSE-like mergers, using a quantitative
measurement of phase mixing (2D causticality). The observed local phase-space distribution best matches the simulated data
1–2 Gyr after collision, and certainly not later than 3 Gyr. This is further evidence that the progenitor of the ‘last major merger’
did not collide with the MW proto-disc at early times, as is thought for the GSE, but instead collided with the MW disc within
the last few Gyr, consistent with the body of work surrounding the VRM.
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Current descriptions of immersive learning cases are often difficult or impossible to compare. This is due to a myriad of different options on what details to include, which aspects are relevant, and on the descriptive approaches employed. Also, these aspects often combine very specific details with more general guidelines or indicate intents and rationales without clarifying their implementation. In this paper we provide a method to describe immersive learning cases that is structured to enable comparisons, yet flexible enough to allow researchers and practitioners to decide which aspects to include. This method leverages a taxonomy that classifies educational aspects at three levels (uses, practices, and strategies) and then utilizes two frameworks, the Immersive Learning Brain and the Immersion Cube, to enable a structured description and interpretation of immersive learning cases. The method is then demonstrated on a published immersive learning case on training for wind turbine maintenance using virtual reality. Applying the method results in a structured artifact, the Immersive Learning Case Sheet, that tags the case with its proximal uses, practices, and strategies, and refines the free text case description to ensure that matching details are included. This contribution is thus a case description method in support of future comparative research of immersive learning cases. We then discuss how the resulting description and interpretation can be leveraged to change immersion learning cases, by enriching them (considering low-effort changes or additions) or innovating (exploring more challenging avenues of transformation). The method holds significant promise to support better-grounded research in immersive learning.
Compexometric titration/Chelatorphy titration/chelating titration
Classification
Metal ion ion indicators
Masking and demasking reagents
Estimation of Magnisium sulphate
Calcium gluconate
Complexometric Titration/ chelatometry titration/chelating titration, introduction, Types-
1.Direct Titration
2.Back Titration
3.Replacement Titration
4.Indirect Titration
Masking agent, Demasking agents
formation of complex
comparition between masking and demasking agents,
Indicators/Metal ion indicators/ Metallochromic indicators/pM indicators,
Visual Technique,PM indicators (metallochromic), Indicators of pH, Redox Indicators
Instrumental Techniques-Photometry
Potentiometry
Miscellaneous methods.
Complex titration with EDTA.
11.1 Role of physical biological in deterioration of grains.pdf
Storagedeteriorationisanyformoflossinquantityandqualityofbio-materials.
Themajorcausesofdeteriorationinstorage
•Physical
•Biological
•Mechanical
•Chemical
Storageonlypreservesquality.Itneverimprovesquality.
Itisadvisabletostartstoragewithqualityfoodproduct.Productwithinitialpoorqualityquicklydepreciates
Recently uploaded (20)
(June 12, 2024) Webinar: Development of PET theranostics targeting the molecu...
(June 12, 2024) Webinar: Development of PET theranostics targeting the molecu...
Tissue fluids_etiology_volume regulation_pressure.pptx
Tissue fluids_etiology_volume regulation_pressure.pptx
Farming systems analysis: what have we learnt?.pptx
Farming systems analysis: what have we learnt?.pptx
Immersive Learning That Works: Research Grounding and Paths Forward
Immersive Learning That Works: Research Grounding and Paths Forward
The binding of cosmological structures by massless topological defects
The binding of cosmological structures by massless topological defects
Alternate Wetting and Drying - Climate Smart Agriculture
Alternate Wetting and Drying - Climate Smart Agriculture
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Evidence of Jet Activity from the Secondary Black Hole in the OJ 287 Binary S...
Evidence of Jet Activity from the Secondary Black Hole in the OJ 287 Binary S...
The debris of the ‘last major merger’ is dynamically young
The debris of the ‘last major merger’ is dynamically young
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Microbiology of Central Nervous System INFECTIONS.pdf
Microbiology of Central Nervous System INFECTIONS.pdf
Compexometric titration/Chelatorphy titration/chelating titration
Compexometric titration/Chelatorphy titration/chelating titration
GBSN - Biochemistry (Unit 6) Chemistry of Proteins
GBSN - Biochemistry (Unit 6) Chemistry of Proteins
11.1 Role of physical biological in deterioration of grains.pdf
11.1 Role of physical biological in deterioration of grains.pdf
How to avoid 5 critical mistakes in CLIA manufacturing
- 1. How to avoid 5 critical mistakes when using Biomagnetic Separation in CLIA IVD-kits manufacturing Lluis M. Martinez, PhD Chief Scientific Officer
- 2. ✓ Since 2004, SEPMAG® is helping leading IVD companies to have high performance, well parameterized Biomagnetic Separation Processes. ✓ We have customers in 5 continents (Europe, America, Asia, Africa and Oceania). ✓ During the last 10 years, we have detected 5 critical mistakes. Customers experience project delays, economical losses and sometimes put production in risk. ✓ SEPMAG® Biomagnetic Separation Systems help our clients to avoid those mistakes. ✓ Provide technical information about the Biomagnetic Separation process is a key part on the process: a well informed customer understands better how to benefit from our technology. Background
- 3. How to specify a Biomagnetic Separation Process? ✓ Users usually refers to • Separation time • Magnetic beads (and biomolecules) losses • Volume (scalability?) • Avoid irreversible aggregation (in-lot consistency ) ✓ All these parameters are ‘functional’, not linked to the biomagnetic separation process itself. What is the key parameter to define a biomagnetic separation process?
- 4. Download to see the answer and the following slides Click here to download the PPT