Houston Dynamic Service Facility Tour
•
1 like•577 views
For over 35 years HDS Inc. has been a leading rotating equipment repair center servicing Texas, Louisiana, Canada & South America. http://www.houstondynamic.com/ Houston Dynamic Service, Inc. has over 35 years of experience as a quality focused steam turbine repair shop servicing the refining, power gen, offshore drilling, and other process industries. Since then, the company has evolved into one of the leading non-OEM, critical rotating equipment repair specialists known for having some of the best minds in the business. Rotating equipment engineering experience, skilled technicians and state-of-the-art repair facilities combine to provide uncompromised service for all types of rotating equipment repair, including pumps, turbines, compressors, blowers, centrifuges, fans, couplings, and high speed gear units. HDS stands apart as a committed partner in achieving every customer’s goal: keeping their critical rotating equipment in continual operation at peak performance.
Report
Share
Report
Share
Recommended
HOW TO INSTALL FUEL FLOW TRANSDUCER 201B
This document provides instructions for installing a J.P. Instruments model 201B fuel flow transducer in an aircraft. It describes how to properly orient and position the transducer horizontally in the fuel line with no bends closer than 6 inches, and to ensure correct attachment of inlet and outlet lines. The transducer should be installed between the engine fuel pump and servo regulator for fuel injected engines. The wires connect to the EDM for power and should be routed away from ignition wires.
Ritepro Check Valves
Ritepro Corporation produces Check Rite combination check valves that employ both spring and gravity forces to close. They provide reliability, rapid closing, and low pressure loss. Check Rite valves are easier to install horizontally or vertically compared to conventional check valves due to their compact design. They are also lighter, more compact, and open fully at lower velocities than swing or tilting check valves. This results in increased reliability and significant savings in weight, size, pressure drop, and energy costs compared to other check valve designs.
Melcar drilling ppt
The document appears to be about various auger boring and drilling projects. It includes photos and descriptions of equipment used like auger boring rigs, air hammers, and reaming heads. It also describes tasks done like preparing bore sites, steering around obstacles, installing casing and valves, and completing bore exits.
SIMSHOW.DOC
A computer simulation of compressor valve dynamics can help improve performance and reduce costs. The simulation solves issues like broken plates and springs by optimizing valve lift and type. This leads to longer valve life, reduced horsepower needs, increased capacity, and lower rod loads and discharge temperatures. The simulation allows testing different configurations to find the best balance of efficiency and lifespan.
Instrument Calibration
1) The author was asked to investigate screw design problems at a sheet extrusion facility with issues on all 5 of its lines.
2) To begin, the author measured the thermal expansion of one extruder barrel according to theoretical calculations and found it was within 0.030 inches, showing around 0.750 inches of expansion as expected. Wear patterns on screw flights were also consistent.
3) Process data gathered revealed the screw speed readings were miscalibrated, with one reading 24% too low and another 23% too high compared to actual counts, indicating the importance of verifying instrument readings.
Horizontal or vertical inline pump design – which one to choose ?
Looking for horizontal or vertical inline pumps for your industry ? The pros & cons of each type that will help you make right decision.
pump-net positive head 2.
Net Positive Suction Head (NPSH) refers to the excess pressure of a liquid arriving at a pump suction over the vapor pressure. The document discusses NPSH available in four typical suction systems and how to calculate it using formulas that account for factors like barometric pressure, vapor pressure, suction lift, and friction losses. Cavitation occurs when NPSH available drops below the pump's required NPSH, causing vapor bubbles that rapidly collapse as they pass through the pump impeller and cause damage over time. To prevent issues like reduced performance and vibration, the system must ensure NPSH available exceeds required NPSH by a safety margin, especially for high suction energy pumps.
Pumps & its types
what are pumps what are its types how do we waste water &to save it.
have a video about this ppt which is in last before slide if you need that video just notify me in comments
Recommended
HOW TO INSTALL FUEL FLOW TRANSDUCER 201B
This document provides instructions for installing a J.P. Instruments model 201B fuel flow transducer in an aircraft. It describes how to properly orient and position the transducer horizontally in the fuel line with no bends closer than 6 inches, and to ensure correct attachment of inlet and outlet lines. The transducer should be installed between the engine fuel pump and servo regulator for fuel injected engines. The wires connect to the EDM for power and should be routed away from ignition wires.
Ritepro Check Valves
Ritepro Corporation produces Check Rite combination check valves that employ both spring and gravity forces to close. They provide reliability, rapid closing, and low pressure loss. Check Rite valves are easier to install horizontally or vertically compared to conventional check valves due to their compact design. They are also lighter, more compact, and open fully at lower velocities than swing or tilting check valves. This results in increased reliability and significant savings in weight, size, pressure drop, and energy costs compared to other check valve designs.
Melcar drilling ppt
The document appears to be about various auger boring and drilling projects. It includes photos and descriptions of equipment used like auger boring rigs, air hammers, and reaming heads. It also describes tasks done like preparing bore sites, steering around obstacles, installing casing and valves, and completing bore exits.
SIMSHOW.DOC
A computer simulation of compressor valve dynamics can help improve performance and reduce costs. The simulation solves issues like broken plates and springs by optimizing valve lift and type. This leads to longer valve life, reduced horsepower needs, increased capacity, and lower rod loads and discharge temperatures. The simulation allows testing different configurations to find the best balance of efficiency and lifespan.
Instrument Calibration
1) The author was asked to investigate screw design problems at a sheet extrusion facility with issues on all 5 of its lines.
2) To begin, the author measured the thermal expansion of one extruder barrel according to theoretical calculations and found it was within 0.030 inches, showing around 0.750 inches of expansion as expected. Wear patterns on screw flights were also consistent.
3) Process data gathered revealed the screw speed readings were miscalibrated, with one reading 24% too low and another 23% too high compared to actual counts, indicating the importance of verifying instrument readings.
Horizontal or vertical inline pump design – which one to choose ?
Looking for horizontal or vertical inline pumps for your industry ? The pros & cons of each type that will help you make right decision.
pump-net positive head 2.
Net Positive Suction Head (NPSH) refers to the excess pressure of a liquid arriving at a pump suction over the vapor pressure. The document discusses NPSH available in four typical suction systems and how to calculate it using formulas that account for factors like barometric pressure, vapor pressure, suction lift, and friction losses. Cavitation occurs when NPSH available drops below the pump's required NPSH, causing vapor bubbles that rapidly collapse as they pass through the pump impeller and cause damage over time. To prevent issues like reduced performance and vibration, the system must ensure NPSH available exceeds required NPSH by a safety margin, especially for high suction energy pumps.
Pumps & its types
what are pumps what are its types how do we waste water &to save it.
have a video about this ppt which is in last before slide if you need that video just notify me in comments
Pumps presentation
Pumps are mechanical devices that use kinetic energy to move fluids by decreasing pressure in the pump's suction and increasing pressure in the discharge. There are two main types of pumps: positive displacement pumps which move a fixed volume of fluid with each cycle, and centrifugal pumps which use an impeller to accelerate fluid and increase pressure. Common industrial pumps include centrifugal pumps like axial flow, mixed flow, and vertical turbine pumps as well as positive displacement pumps like reciprocating, screw, and gear pumps. Pumps have components like a casing, impeller, shaft, and seals and are classified according to their method of moving fluid.
Pumps in hydraulic system
Pumps are used to deliver hydraulic fluid throughout a hydraulic circuit. There are two main types of pumps - positive displacement pumps and non-positive displacement pumps. Positive displacement pumps precisely regulate fluid output with each cycle, while non-positive displacement pumps like centrifugal pumps rely on fluid velocity to move fluid and output varies with pressure. Common positive displacement pump designs include gear pumps, vane pumps, and piston pumps which use rotating gears, vanes, or pistons to draw fluid in and push it out in fixed volumes. Selection of the appropriate pump type depends on factors like operating pressure, flow requirements, drive type, and tolerance to contamination.
Axial Pump Senatorlibya
Rotodynamic pumps can be axial flow, mixed flow, or centrifugal. Axial and mixed flow pumps are commonly used for high-volume, low-pressure applications like water supplies, flood control, and irrigation. They generate head pressure through axial, radial, or a combination of motions. Mixed flow pumps produce greater head pressure than axial pumps alone.
Pumps
Pumps convert mechanical energy to fluid energy and come in various types. The main types are positive displacement pumps, centrifugal pumps, axial flow pumps, and mixed flow pumps. Centrifugal pumps are frequently used in water distribution systems and work by spinning an impeller to push water outward. Axial flow pumps have flow entering and leaving along the pump axis. Multiple impellers can be arranged in series for higher head applications. Pump performance is characterized by curves showing how head and efficiency vary with flow. Total dynamic head and net positive suction head are important concepts for pump sizing and operation. Cavitation can occur if net positive suction head drops too low. Pumps can be arranged in series or parallel to meet different flow
Positive Displacement Pumps - Basic Principle
Positive Displacement Pumps - Operation
This presentation gives a basic idea of Positive Displacement Pump Basic Principle of Operation.
Pumps
The document discusses various types of pumps used in building services including centrifugal, submersible, and jet pumps. It provides details on centrifugal pump components, advantages like smooth flow and reliability, and disadvantages like loss of priming. The document also discusses pump selection factors like head, capacity, and efficiency. It covers pump performance calculation and energy saving measures like demand side management and using variable frequency drives.
Hydraulic Pump
A pump is a mechanical device that uses mechanical action to move fluids from one place to another. There are two main types of pumps: positive displacement pumps and hydrodynamic pumps. Positive displacement pumps work by trapping a fixed amount of fluid and forcing it to the discharge side, including types like reciprocating pumps (piston pumps, plunger pumps, diaphragm pumps), rotary pumps (gear pumps, screw pumps, lobe pumps, vane pumps). Reciprocating positive displacement pumps include piston pumps, diaphragm pumps, and plunger pumps. Piston pumps can be further divided into types like axial piston pumps and radial piston pumps.
Hydraulic Pumps
Pumps are mechanical devices that use prime mover energy to move fluids from one place to another. Positive displacement pumps apply pressure directly to the liquid using reciprocating or rotating components. The main types of positive displacement pumps are reciprocating pumps like piston pumps and diaphragm pumps, and rotary pumps like gear pumps. Reciprocating piston pumps use oscillating pistons to move fluid, and can be single or multi-cylinder designs. Axial and radial piston pumps use rotating cylinders to pump fluid. Diaphragm pumps use a reciprocating rubber diaphragm and check valves to pump fluid on each stroke. Positive displacement pumps are suitable for high-pressure applications and handling viscous or abrasive fluids.
Week 2 3_hydraulic_pump
This document discusses different types of hydraulic pumps, including their basic operating principles and comparisons. It provides equations to calculate pump parameters such as theoretical flow rate, volumetric displacement, efficiency, and torque. For example, it defines that positive displacement pumps capture and transfer fixed amounts of fluid, while centrifugal pumps impart velocity to fluid to create pressure. Gear pump displacement can be calculated based on gear dimensions. Pump efficiency is affected by factors like leakage and viscosity.
Positive Displacement Pumps
Positive displacement pumps move fluids by trapping a fixed volume and forcing that volume from the suction to discharge side. Reciprocating pumps, like piston pumps, use reciprocating motion powered by engines while rotary pumps use rotating components like gears or lobes. Piston pumps have two check valves and a reciprocating piston powered by translating rotary motion into linear motion. They can be direct or indirect acting, simplex or duplex, and single or double acting. Diaphragm pumps use a flexible diaphragm instead of pistons. Rotary pumps have gears, lobes, screws, cams, or vanes that rotate to trap and move fluid and include gear, lobe, screw, vane, and cam pumps
Pump
The document provides information about pumps, including:
1) Pumps are mechanical devices that use rotation or reciprocation to move fluid from one place to another by converting energy into hydraulic energy.
2) The main purposes of pumps are to transfer fluid from low to high pressure areas, from low to high elevations, and from local to distant locations.
3) There are two main types of pumps - positive displacement pumps which move a fixed volume of fluid with each cycle, and centrifugal pumps which use centrifugal force to move fluid by spinning an impeller.
Introduction to Pumps
This document provides an introduction to different types of pumping equipment, including their principles of operation and categories. It discusses the main differences between rotodynamic pumps (like centrifugal pumps) and positive displacement pumps (like reciprocating and rotary pumps). Centrifugal pumps are best for medium to high flow rates and low to medium pressures, while positive displacement pumps can achieve very high pressures or handle low flows. The document also compares characteristics like flow patterns, pressure capabilities, cost considerations, and fluid handling for different pump categories.
Pumps and types of pumps
the presentation includes basic ideas about water pumps, various terminology generally used for the pumps, classification of pumps and ideas about the types its construction and working
Dymanics of open channel flow
The document discusses open channel flow, providing definitions and key equations. It begins by defining an open channel as a channel with a free surface not fully enclosed by solid boundaries. Important equations for open channel flow are then presented, including Chezy's and Manning's equations for calculating velocity and discharge using variables like hydraulic radius, channel slope, and roughness coefficients. Factors influencing open channel flow like channel shape, surface roughness, and flow regime (e.g. laminar vs turbulent) are also addressed.
Centrifugal pump
The document discusses centrifugal pumps. It describes how centrifugal pumps work by converting mechanical energy to hydraulic energy using centrifugal force. They work on the principle of forced vortex flow. Key components include an impeller that rotates and accelerates the fluid outward, and a casing that captures the fluid and converts its kinetic energy to pressure. Centrifugal pumps are used to pump liquids like water, sewage, petroleum and more. Performance curves are used to predict pump behavior under different operating conditions.
Basic hydraulic circuit
This document provides an overview of basic hydraulic circuits. It describes how hydraulic systems are divided into a signal control section and a hydraulic power section. The power section includes a pump, valves to control fluid flow and pressure, and hydraulic cylinders or motors. Simple circuits are shown including a pump, directional control valve, cylinder, and pressure relief valve. The interactions of these components in a basic circuit are illustrated through animations. Additional diagrams demonstrate uses of filters, contamination indicators, and pressure relief valves, including how a brake valve is used to prevent pressure spikes when a directional control valve closes suddenly.
Introduction to physics
The document discusses the differences between subjective and objective outcomes, with subjective being based on feelings and opinions while objective is based on facts. It also explains the scientific method process of recognizing a problem, forming a hypothesis, making predictions, testing experiments, and formulating general rules based on results. Examples are provided to illustrate accuracy versus precision in measurements and the importance of changing only one variable at a time in experiments.
Haza dfr.mak
This document provides an overview and background on tourism in Hazara Division, Pakistan. It discusses the region's history, climate, population, and infrastructure. Tourism in Hazara currently focuses on areas like Kaghan Valley and Lake Saiful Muluk, which offer natural beauty and cultural attractions. However, tourism development has been unplanned and uneven. The Sarhad Tourism Corporation was created to promote sustainable tourism development through private sector involvement. This regional master plan aims to systematically identify and develop tourism areas, improve infrastructure and services, market Hazara tourism domestically and internationally, and make the corporation self-financing.
Grado 10 orientaciones trabajo final feb 16 2015
Este documento presenta las instrucciones y el cronograma para un proyecto de investigación sobre moléculas inorgánicas. El proyecto se desarrollará entre 2015-2017. Los estudiantes trabajarán en equipos para investigar una molécula asignada, incluyendo su historia, estructura, usos y efectos. Deberán presentar informes periódicos en blogs y redes sociales. El trabajo final incluirá capítulos sobre el descubrimiento y propiedades de la molécula, así como una discusión de sus impactos sociales,
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
More Related Content
Viewers also liked
Pumps presentation
Pumps are mechanical devices that use kinetic energy to move fluids by decreasing pressure in the pump's suction and increasing pressure in the discharge. There are two main types of pumps: positive displacement pumps which move a fixed volume of fluid with each cycle, and centrifugal pumps which use an impeller to accelerate fluid and increase pressure. Common industrial pumps include centrifugal pumps like axial flow, mixed flow, and vertical turbine pumps as well as positive displacement pumps like reciprocating, screw, and gear pumps. Pumps have components like a casing, impeller, shaft, and seals and are classified according to their method of moving fluid.
Pumps in hydraulic system
Pumps are used to deliver hydraulic fluid throughout a hydraulic circuit. There are two main types of pumps - positive displacement pumps and non-positive displacement pumps. Positive displacement pumps precisely regulate fluid output with each cycle, while non-positive displacement pumps like centrifugal pumps rely on fluid velocity to move fluid and output varies with pressure. Common positive displacement pump designs include gear pumps, vane pumps, and piston pumps which use rotating gears, vanes, or pistons to draw fluid in and push it out in fixed volumes. Selection of the appropriate pump type depends on factors like operating pressure, flow requirements, drive type, and tolerance to contamination.
Axial Pump Senatorlibya
Rotodynamic pumps can be axial flow, mixed flow, or centrifugal. Axial and mixed flow pumps are commonly used for high-volume, low-pressure applications like water supplies, flood control, and irrigation. They generate head pressure through axial, radial, or a combination of motions. Mixed flow pumps produce greater head pressure than axial pumps alone.
Pumps
Pumps convert mechanical energy to fluid energy and come in various types. The main types are positive displacement pumps, centrifugal pumps, axial flow pumps, and mixed flow pumps. Centrifugal pumps are frequently used in water distribution systems and work by spinning an impeller to push water outward. Axial flow pumps have flow entering and leaving along the pump axis. Multiple impellers can be arranged in series for higher head applications. Pump performance is characterized by curves showing how head and efficiency vary with flow. Total dynamic head and net positive suction head are important concepts for pump sizing and operation. Cavitation can occur if net positive suction head drops too low. Pumps can be arranged in series or parallel to meet different flow
Positive Displacement Pumps - Basic Principle
Positive Displacement Pumps - Operation
This presentation gives a basic idea of Positive Displacement Pump Basic Principle of Operation.
Pumps
The document discusses various types of pumps used in building services including centrifugal, submersible, and jet pumps. It provides details on centrifugal pump components, advantages like smooth flow and reliability, and disadvantages like loss of priming. The document also discusses pump selection factors like head, capacity, and efficiency. It covers pump performance calculation and energy saving measures like demand side management and using variable frequency drives.
Hydraulic Pump
A pump is a mechanical device that uses mechanical action to move fluids from one place to another. There are two main types of pumps: positive displacement pumps and hydrodynamic pumps. Positive displacement pumps work by trapping a fixed amount of fluid and forcing it to the discharge side, including types like reciprocating pumps (piston pumps, plunger pumps, diaphragm pumps), rotary pumps (gear pumps, screw pumps, lobe pumps, vane pumps). Reciprocating positive displacement pumps include piston pumps, diaphragm pumps, and plunger pumps. Piston pumps can be further divided into types like axial piston pumps and radial piston pumps.
Hydraulic Pumps
Pumps are mechanical devices that use prime mover energy to move fluids from one place to another. Positive displacement pumps apply pressure directly to the liquid using reciprocating or rotating components. The main types of positive displacement pumps are reciprocating pumps like piston pumps and diaphragm pumps, and rotary pumps like gear pumps. Reciprocating piston pumps use oscillating pistons to move fluid, and can be single or multi-cylinder designs. Axial and radial piston pumps use rotating cylinders to pump fluid. Diaphragm pumps use a reciprocating rubber diaphragm and check valves to pump fluid on each stroke. Positive displacement pumps are suitable for high-pressure applications and handling viscous or abrasive fluids.
Week 2 3_hydraulic_pump
This document discusses different types of hydraulic pumps, including their basic operating principles and comparisons. It provides equations to calculate pump parameters such as theoretical flow rate, volumetric displacement, efficiency, and torque. For example, it defines that positive displacement pumps capture and transfer fixed amounts of fluid, while centrifugal pumps impart velocity to fluid to create pressure. Gear pump displacement can be calculated based on gear dimensions. Pump efficiency is affected by factors like leakage and viscosity.
Positive Displacement Pumps
Positive displacement pumps move fluids by trapping a fixed volume and forcing that volume from the suction to discharge side. Reciprocating pumps, like piston pumps, use reciprocating motion powered by engines while rotary pumps use rotating components like gears or lobes. Piston pumps have two check valves and a reciprocating piston powered by translating rotary motion into linear motion. They can be direct or indirect acting, simplex or duplex, and single or double acting. Diaphragm pumps use a flexible diaphragm instead of pistons. Rotary pumps have gears, lobes, screws, cams, or vanes that rotate to trap and move fluid and include gear, lobe, screw, vane, and cam pumps
Pump
The document provides information about pumps, including:
1) Pumps are mechanical devices that use rotation or reciprocation to move fluid from one place to another by converting energy into hydraulic energy.
2) The main purposes of pumps are to transfer fluid from low to high pressure areas, from low to high elevations, and from local to distant locations.
3) There are two main types of pumps - positive displacement pumps which move a fixed volume of fluid with each cycle, and centrifugal pumps which use centrifugal force to move fluid by spinning an impeller.
Introduction to Pumps
This document provides an introduction to different types of pumping equipment, including their principles of operation and categories. It discusses the main differences between rotodynamic pumps (like centrifugal pumps) and positive displacement pumps (like reciprocating and rotary pumps). Centrifugal pumps are best for medium to high flow rates and low to medium pressures, while positive displacement pumps can achieve very high pressures or handle low flows. The document also compares characteristics like flow patterns, pressure capabilities, cost considerations, and fluid handling for different pump categories.
Pumps and types of pumps
the presentation includes basic ideas about water pumps, various terminology generally used for the pumps, classification of pumps and ideas about the types its construction and working
Dymanics of open channel flow
The document discusses open channel flow, providing definitions and key equations. It begins by defining an open channel as a channel with a free surface not fully enclosed by solid boundaries. Important equations for open channel flow are then presented, including Chezy's and Manning's equations for calculating velocity and discharge using variables like hydraulic radius, channel slope, and roughness coefficients. Factors influencing open channel flow like channel shape, surface roughness, and flow regime (e.g. laminar vs turbulent) are also addressed.
Centrifugal pump
The document discusses centrifugal pumps. It describes how centrifugal pumps work by converting mechanical energy to hydraulic energy using centrifugal force. They work on the principle of forced vortex flow. Key components include an impeller that rotates and accelerates the fluid outward, and a casing that captures the fluid and converts its kinetic energy to pressure. Centrifugal pumps are used to pump liquids like water, sewage, petroleum and more. Performance curves are used to predict pump behavior under different operating conditions.
Basic hydraulic circuit
This document provides an overview of basic hydraulic circuits. It describes how hydraulic systems are divided into a signal control section and a hydraulic power section. The power section includes a pump, valves to control fluid flow and pressure, and hydraulic cylinders or motors. Simple circuits are shown including a pump, directional control valve, cylinder, and pressure relief valve. The interactions of these components in a basic circuit are illustrated through animations. Additional diagrams demonstrate uses of filters, contamination indicators, and pressure relief valves, including how a brake valve is used to prevent pressure spikes when a directional control valve closes suddenly.
Introduction to physics
The document discusses the differences between subjective and objective outcomes, with subjective being based on feelings and opinions while objective is based on facts. It also explains the scientific method process of recognizing a problem, forming a hypothesis, making predictions, testing experiments, and formulating general rules based on results. Examples are provided to illustrate accuracy versus precision in measurements and the importance of changing only one variable at a time in experiments.
Haza dfr.mak
This document provides an overview and background on tourism in Hazara Division, Pakistan. It discusses the region's history, climate, population, and infrastructure. Tourism in Hazara currently focuses on areas like Kaghan Valley and Lake Saiful Muluk, which offer natural beauty and cultural attractions. However, tourism development has been unplanned and uneven. The Sarhad Tourism Corporation was created to promote sustainable tourism development through private sector involvement. This regional master plan aims to systematically identify and develop tourism areas, improve infrastructure and services, market Hazara tourism domestically and internationally, and make the corporation self-financing.
Grado 10 orientaciones trabajo final feb 16 2015
Este documento presenta las instrucciones y el cronograma para un proyecto de investigación sobre moléculas inorgánicas. El proyecto se desarrollará entre 2015-2017. Los estudiantes trabajarán en equipos para investigar una molécula asignada, incluyendo su historia, estructura, usos y efectos. Deberán presentar informes periódicos en blogs y redes sociales. El trabajo final incluirá capítulos sobre el descubrimiento y propiedades de la molécula, así como una discusión de sus impactos sociales,
Viewers also liked (20)
Recently uploaded
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Recently uploaded (20)
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Houston Dynamic Service Facility Tour
- 1. Welcome to
- 2. Houston Dynamic Service, Inc. 8150 Lawndale Houston, TX 77012
- 3. Houston Dynamic Service, Inc
- 4. Machine Shop
- 6. Machining
- 7. Machine Shop
- 12. Mechanical Shop
- 13. Balance Shop
- 14. HDS History Founded in 1976 Clayton Lau purchased HDS from AC in December 2001. 35 years in business
- 15. Houston Dynamic Service, Inc. Balancing Centrifuge Repair Compressor Repair Field Services Gearbox Repair Machine Shop Pump Repair Seal Strips Turbine Repair
- 16. Balancing
- 17. Schenck Cab 920
- 18. Balancing
- 19. Balancing
- 20. Balancing
- 21. Balancing
- 39. Compressors
- 40. Compressors
- 41. Blower & Fan Repair
- 42. Blower Repair
- 43. Gearbox Repair
- 44. Gearbox Repair
- 45. Gearbox Repair
- 46. Gearbox Repair
- 47. Gearbox Repair
- 48. Gearbox Repair
- 49. Gearbox Repair
- 50. Gearbox Repair
- 51. Gearbox Repair
- 52. Gearbox Repair
- 53. Testing
- 56. Machining on 105” Vertical Mill
- 57. Machining
- 60. Machining
- 61. Machining
- 62. Pump Repair
- 63. Pump Repair
- 64. BP Offshore
- 65. Pump Repair
- 66. Pump Repair
- 67. Pump Repair
- 68. Pump Repair
- 71. Multi-Stage Pump
- 72. Gould’s Cooling Tower Pump Gould’s 3420
- 73. Vertical Cooling Basin Pump
- 75. Seal Strips
- 76. Seal Strips
- 77. Seal Housings
- 78. Turbine Repair
- 79. Rotor Inspection
- 80. Rotor Inspection
- 81. Turbine Repair
- 82. Turbine Repair
- 85. Turbine Repair
- 86. Turbine Repair
- 87. Houston Dynamic Service, Inc. Serving Industry 7 Days Days A Week 24 Hours A Day