1. BACKHAULS
Main characteristics 5 GHz Point-to-Point Outdoor Wireless
 5 GHz (HIPERLAN) Point-Point System
 Integrated Antenna 23dBi or external antenna vailable
 WPA2 encryption, WPA or WEP
 Throughput up to 108MB / s
 DFS; ACCS; ATPC
 10/100 Fast Ethernet interfaces
 Degree of Protection IP67
 Radio type OFDM or DSSS
 NLOS Capability
 drag'n'drop System backup
 Plug'n'Play simple installation
 Turbo mode for high performance
 Stack TCP / IP, flexible configuration
 Diagnostics equipment "on board" or remote
 Upgrade software, monitoring and remote configuration
 Power Over Ethernet (POE) Power Supply 48Vdc or 12Vdc
 surge/spikes protected
 Installed with "general authorization"
 IP 68 enclosure
 available with: one radio; two radios;
 solar panel supply available on request
 Fiber optic data in/out option available; this method suppress
interferences by others RF signals.
Applications
• Telco Carrier
• System Integrator
• Security and Urban Video
• Wireless Internet Service Provider - WISP
• Private Point-to-Multipoint Wireless Networking
• Emergency back up / Disaster Recovery
• Military, government or university
• Alternative to cable CDN, HDSL or Optic Fiber
www.res-ingenium.com Iso 9001 certified company

2. Description
Hiperlink Backhaul is a high capacity Point-Point Outdoor Ethernet
which can make a wireless bridge at middle and long distance.
Backhaul Hiperlink is available in three basic configurations:
◦ backhaul with 23dB integrated antenna.
◦ backhaul with 23dB integrated antenna + second radio on board
with RF output on “N”/ fem connection in order to install a second
antenna (ex: a sectorial antenna for a small local Base Station).
◦ backhaul without antenna integrated with RF output connector on Are there features the latest generation VPN, data security, encryption,
the "N" / fem. in order to install a directive antenna different than IP Assignment, Software Update Remote Agent and SNMP.
integrated.
Hiperlink Backhaul is supplied as standard with Power Over The robustness of the system and the degree of protection IP67
Ethernet power adapter 48V. This version is also available at 12V to waterproof equipment, allows you to install such systems in the most
be powered through solar cells or batteries.The high gain internal difficult environments such as marine, mountains at high altitude or
antenna (23db) allows extremely safe point-to-point connection up desert areas.
to half-length distances. The option to choose the equipment
without the internal antenna, allows you to match an higher gain Hiperlink Backhaul is widely used in construction of infrastructure for
antenna in order to cover even longest distances. Wireless Network Service Provider, security and video surveillance
urban Carrier, Military Institutions, Public Administration, University and
Disaster Recovery. The Hiperlink backhaul apparatus is suitable for the
construction of high-capacity backbone and can reach up to 70 Mbps
with channel width of 40 MHz (turbo mode).
Specifications
Operative bandwidth: 5,47-5,725 GHz (also available 5.725-5.825 Ghz) External antennas available: Directive Grid, Panel or Dish (many gains)
DSSS: DBPSK, DQPSK, CCK Management and Telnet, client, Telnet server, MAC Telnet server, SSH,
Modulaztion:
OFDM: BPSK, QPSK, 16 QAM, 64 QAM configuration modes: GUI su SSH, http
TX Power: 100mW VPN Support: IPSEC, EoIP, PPtP, VLAN, L2TP, PPPoE, IPIP
Sensitivity: -91 dBm@ 6 Mbit/s ± 1dB (typ) IP Assignment: DHCP client, DHCP server
On internal antenna 23dB and/or on “N”/Fem. 50 Ω
RF output: Ethernet port: Fast Ethernet 10/100 Full Duplex, Autosensing
connector (to choose during purchase order)
RF Filter: band-pass filter 5 GHz (optional) VLAN: 802.1q, Multiple VLAN interface, inter VLAN routing
DFS (Dynamic Frequency Selection), Auto Channel
Channel management and Software update, backup and
Selection,Radar free By FTP and Drag and Drop directly from system folder
Transmit power management: restoring configuration:
TPC function
Standard Ethernet: 802.3 CSMA/CD Security: Association protocol– ESSID
POE 48 V 802.3 af o POE 12 V/24V Network Management: Encrypyion : WPA2 , WPA, WEP authentication
Power supply and consuption:
11 W AES-CCM & TKIP Encryption
Protection: Electronic circuit for lighting protection Internal Firewall i ; INTERNAL ROUTER
Degree of protection: Watertight IP67 in die-cast alluminium Peer to Peer protocol limitation
MAC-ADDRESS authentication & filtering
Temperature Range: -40°C / + 55°C IP address filtering & protocol filtering
Pole support: For mm 40/70 poles (H and V adjustment). RADIUS server Authentication (AAA)
Dimension: 340 mm x 340 mm x 90 mm Access protection: Multilayer users management
Weight: 2,9Kg (iinternal antenna); 4,4 Kg (external antenna) Agent SNMP: SNMP V1 client, MIB II, Bridge MIB
Bridge: Multiple bridge interfaces QoS: 802.1p (Layer2 traffic priority)
Bridge associations on a per interface basis, Protocol IPToS RFC791 (Layer3 traffic priority)
can be selected to be forwarded or discarded CBQ Queuing
Layer 4-7 traffic shaping
MAC address table can be monitored in real time
Hierarchical HTB QoS system with bursts
IP address assignment for router access PCQ, RED, SFQ, FIFO queue; CIR, MIR
STP Spanning Tree Protocol Contention ratios, dynamic client rate equalizing
Part Numbers
IRTX6-40 HIPERLINK 5.9 - 6.4 GHz point-to-point with 23dB internal antenna, support bracket and POE power supply
IRTX10-40 HIPERLINK 10.15-10.648 GHz point-to-point with 23dB internal antenna, support bracket and POE power supply
IRTX23-40 HIPERLINK 21.2 – 23.6 GHz point-to-point without internal antenna, support bracket and POE power supply
Via dei Vasari,17 - 05018 Orvieto (TR) - Italy www.res-ingenium.com
Tel +39 0763. 316333
Fax +39 0763 316002
E-mail: info@res-ingenium.com