Heat sink
•
0 likes•412 views
JunPus International Co., Ltd. produces ceramic heat sinks. Their ceramic heat sinks have several advantages including a large air-contact area for heat dissipation, low weight, easy assembly, high voltage breakdown resistance, and high heat resistance. They offer standard and custom sizes and shapes of ceramic heat sinks for applications such as power ICs, high temperature components, transistors, set-top boxes, routers, and LED TVs.
Report
Share
Report
Share
Download to read offline
Recommended
Ies1000
The document summarizes an IES-1000 1U IP DSLAM device with AC/DC power and selectable line cards. It can accommodate up to 2 line cards, supporting G.SHDSL, VoIP, and ADSL technologies. Specific line cards are listed that provide 8-16 users per card and support standards like G.992.3, G.992.5, and G.SHDSL.bis. Contact information is given at the end for additional technical support.
Ellis Patents 2 Hole Plastic Cable Cleat
The document provides specifications for two-hole cable clamps manufactured in different materials for securing power cables. It includes a table listing various models of cable clamps specifying their material, dimensions, weight, fixing holes and packaging quantity. The clamps are tested according to international standards for properties such as flame resistance, load strength, impact resistance and temperature resistance.
WT HenleyMulti Way Service Heads 240/415V
This document describes a range of multiway service heads for supplying electricity to multi-occupancy properties. The service heads come in 7, 10, 16, or 24 configurations and provide a safe and reliable means of distributing power through subdivided properties like apartment buildings. They feature fuse protection, connections by socket screws for easy wiring, and dimensions varying by configuration.
Wind Energy in Australia
Wind energy currently generates enough power for around 1 million Australian households. A modern wind turbine is capable of powering up to 10,000 homes. Wind farms invest billions in the Australian economy and support thousands of jobs. Community support for wind farms is strong, with nearly 80% of those surveyed supporting wind farm development. Multiple studies have found no direct health impacts from wind turbines.
Brochure Electronics Cooling Products
Brochure describing our electronics cooling capabilities and cooling products for electroinic equipment
Final report
1) The document summarizes the work completed during an internship at Schneider Electric, including translating documents, training on the Ampla and SSRS software, and working on projects for Baxter in Suzhou.
2) For the Baxter projects, tasks included matching equipment to meters, confirming matches, building an electric single line map, modeling plants in Ampla, and refining KPIs. Training covered the basics of using Ampla and SSRS software.
3) Working on real projects provided experience in communication, understanding project processes, and modeling systems from the overall plant down to specific details.
LEDs_Magazine_webinar_-_Replace_traditional_materials_with_polymers_for_LED_l...
This document discusses opportunities to replace traditional metal materials with engineered polymers in LED luminaires to reduce costs and improve design flexibility. It outlines how polymers can lower material and manufacturing expenses for lens, reflectors, housings and heat sinks. Case studies show projects achieving weight reductions of 33-60%, manufacturing productivity gains of 13-49%, and overall cost savings of 13-39% by converting to optimized polymer solutions. Implementing polymer conversions requires considering regulatory compliance, prototype validation, and global supply chain coordination.
Pcb cross-section
Domestic circuit board fabricator providing mircosectioning in in-house laboratory for cross sections on microvias.
Recommended
Ies1000
The document summarizes an IES-1000 1U IP DSLAM device with AC/DC power and selectable line cards. It can accommodate up to 2 line cards, supporting G.SHDSL, VoIP, and ADSL technologies. Specific line cards are listed that provide 8-16 users per card and support standards like G.992.3, G.992.5, and G.SHDSL.bis. Contact information is given at the end for additional technical support.
Ellis Patents 2 Hole Plastic Cable Cleat
The document provides specifications for two-hole cable clamps manufactured in different materials for securing power cables. It includes a table listing various models of cable clamps specifying their material, dimensions, weight, fixing holes and packaging quantity. The clamps are tested according to international standards for properties such as flame resistance, load strength, impact resistance and temperature resistance.
WT HenleyMulti Way Service Heads 240/415V
This document describes a range of multiway service heads for supplying electricity to multi-occupancy properties. The service heads come in 7, 10, 16, or 24 configurations and provide a safe and reliable means of distributing power through subdivided properties like apartment buildings. They feature fuse protection, connections by socket screws for easy wiring, and dimensions varying by configuration.
Wind Energy in Australia
Wind energy currently generates enough power for around 1 million Australian households. A modern wind turbine is capable of powering up to 10,000 homes. Wind farms invest billions in the Australian economy and support thousands of jobs. Community support for wind farms is strong, with nearly 80% of those surveyed supporting wind farm development. Multiple studies have found no direct health impacts from wind turbines.
Brochure Electronics Cooling Products
Brochure describing our electronics cooling capabilities and cooling products for electroinic equipment
Final report
1) The document summarizes the work completed during an internship at Schneider Electric, including translating documents, training on the Ampla and SSRS software, and working on projects for Baxter in Suzhou.
2) For the Baxter projects, tasks included matching equipment to meters, confirming matches, building an electric single line map, modeling plants in Ampla, and refining KPIs. Training covered the basics of using Ampla and SSRS software.
3) Working on real projects provided experience in communication, understanding project processes, and modeling systems from the overall plant down to specific details.
LEDs_Magazine_webinar_-_Replace_traditional_materials_with_polymers_for_LED_l...
This document discusses opportunities to replace traditional metal materials with engineered polymers in LED luminaires to reduce costs and improve design flexibility. It outlines how polymers can lower material and manufacturing expenses for lens, reflectors, housings and heat sinks. Case studies show projects achieving weight reductions of 33-60%, manufacturing productivity gains of 13-49%, and overall cost savings of 13-39% by converting to optimized polymer solutions. Implementing polymer conversions requires considering regulatory compliance, prototype validation, and global supply chain coordination.
Pcb cross-section
Domestic circuit board fabricator providing mircosectioning in in-house laboratory for cross sections on microvias.
Comunicado de prensa 013-Polo Democratico Alternativo (Caquetá)
El documento anuncia un homenaje al líder político Carlos Gaviria en Caquetá el 14 de abril a las 6:30 pm en AICA. Varios grupos como el Polo Democrático Alternativo PDA Caquetá, la Academia de Historia de Caquetá y la CUT expresan sus condolencias por el fallecimiento de Gaviria, destacado impulsor de la unidad de la izquierda y del PDA. Gaviria murió a los 77 años el 31 de marzo de 2015 en Bogotá debido a problemas respiratorios, después de una destacada
Diabatix - Optimizing your design
The document discusses Diabatix, a company that provides simulation-driven design optimization and virtual prototyping services to optimize heat sink and cooling channel designs. Specifically, Diabatix uses computational fluid dynamics and topology optimization to design problem-specific solutions that increase efficiency and reduce weight and pressure drop compared to traditional trial-and-error approaches. Examples of optimized designs include an S-shaped cooling channel and a heat sink for non-uniform heating.
Advanced cfd electronics cooling analyis
The document discusses advanced CFD modeling of various electronics cooling design options for air management. It analyzes a VME card configuration with dual PMC positions and a high-density memory daughter card. Various heat sink designs are modeled including a baseline aluminum design, an enhanced copper design, and a design using heat pipes. The CFD modeling shows the impact of the different designs on processor junction temperatures under different power and airflow scenarios.
Brainstorming about LED heat management
The document discusses potential design improvements for LED heat management. It proposes:
1) Rearranging LED packages to reduce heat concentration and increase number of packages.
2) Redesigning the heat sink into a cylindrical shape for greater surface area and heat conductivity.
3) Increasing the size and number of copper heat pipes for improved heat transfer.
4) Using a SynJet fan instead of a regular fan for longer life, less dust accumulation, and higher air flow.
5) Redesigning the shell for better air flow and lighter weight.
US8746927_Flexible_Heat_Sink
The patent document describes a lighting fixture that includes an adjustable LED light module and at least one flexible heat sink member thermally coupled to the LED light module. The flexible heat sink member is configured to dissipate heat from the LED light module while allowing adjustment of the module on at least one axis. Specifically, the flexible heat sink terminates near an opening of the lighting fixture housing to dissipate heat outside the housing without interfering with rotation of the adjustable LED light module.
Heat simulator design Problem 1
1. The document presents the design of a microprocessor cooling system to keep the temperature of an Intel Pentium 4 processor below 55°C. Equations are provided to calculate the temperature, heat flux, efficiency, and effectiveness of a heat sink design.
2. A proposed design uses 24 aluminum fins that is within budget and keeps the processor temperature at 52.77°C. The overall height of 24.5mm is less than the maximum of 25mm.
3. Calculations show the design has a heat removal rate of 802 W/m^2, fin efficiency of 23.9%, total efficiency of 24.4%, and effectiveness of 6.1. The design meets all constraints.
Final Project
This document describes a student's final project to design a CPU heat sink using 3D modeling software. It includes steps to model each component of the heat sink, including the fan, heatsink, screws, and brackets. Mass properties, surface analysis, and sustainable design considerations are analyzed. The student found creating curved surfaces challenging but learned about complex surface creation. Analysis of volume, center of mass, and sustainable design selections aligned with engineering fundamentals. Feedback was the course provided a good learning experience but was early in the semester.
Clemens Lasance: LED Junction Temperature, Thermal Resistance PCB
Second sneak peak of Metal Core PCB Design webinar featuring the Thermal Management for LED Applications segment: What is the role of the PCB? by Clemens Lasance, former Principal Scientist Emeritus with Philips Research. With over 30 years experience in the field, Clemens' passion and scrutiny for the subject has established him as the principally renowned expert pertaining to thermal management.
Aluminum Extrusion Design And The Role It Plays In High Performance Cooling S...
The document summarizes a webinar presentation about aluminum extrusion design and its role in high performance cooling solutions. The presentation covers Sapa Group and Sapa Extrusions Americas, considerations for profile and thermal design including geometry, surface finishing and simulation tools. Specific solutions like friction stir welding modular heat sinks and liquid coolers are discussed. Contact information is provided for follow up questions.
52 stephen a. ferranti - 6249437 - heat sink with offset fin profile
Stephen A. Ferranti, John Paul Mello, Madhu Ganesa-Pillai, Amanda C. Reeves, Leon Klafter, Joanne C. Zhang - Heat Sink with Offset Fin Profile
CFD chassis cooling design
Computational fluid dynamics (CFD) is used for chassis design and advanced cooling analysis. A double module with interleaved heat sink fins and tapered pressure balancing plenums at the inlet is analyzed. High power GPUs require innovative cooling designs.
Statistical Analysis of New Product Development (NPD) Cycle-time Data
Alpha Technologies recently concluded a comprehensive study of historical NPD performance data (cost, cycle-time, resource requirements, program type and complexity, plans versus actuals, etc.) and has successfully applied the results of this study to make measureable improvements to their NPD process. Probability-based summary data is used to aide in planning and budgeting, set statistically valid continuous improvement targets for performance scorecards, and develop a visual resource management tool for allocation of human resources to present and future NPD programs.
3 optimum design of heat sink by using differential evolution and simplex me...
This document discusses optimizing the design of a heat sink using differential evolution (DE) and the simplex method. DE was used to minimize the thermal resistance of inline and staggered fin arrangements, finding values of 0.500467 °C/W and 0.4021 °C/W respectively. Parameters like fin diameter, length, number, approach velocity and pitch were varied. Comparisons were made between DE and the simplex method, with DE taking less time to find the minimum thermal resistance for the case study.
Heat Transfer Project
The document discusses heat sink design for cooling electronic systems. It compares different design parameters for heat sinks such as fin material, shape, layout, working fluid, and forcing mechanism. Two solutions are proposed to achieve heat fluxes of 2 kW/m^2 and 200 kW/m^2. Sample calculations are shown for a solution using aluminum fins cooled by forced air to achieve a heat flux of 209.377 kW/m^2.
Six Sigma Project = Internet Sample
The document discusses a project to reduce failures of heat sink mounted components by improving the heat sink assembly process. It aims to determine the highest risk component, identify correlations between field data and production data, set goals to reduce defects by 50%, and analyze the current process capability to identify non-capable processes in need of improvement.
Design Portfolio Draft 3
James C. Blake has a BS in Mechanical Engineering from UCSD. His portfolio includes projects involving the design of a laser Doppler sensor housing, heat sink machining, a motorized micro-alignment mechanism, an indoor electronics enclosure, custom lens mounts, and assembly instructions. He has experience with SolidWorks, Mastercam, prototyping, fabrication, and working with researchers and sponsors. In his personal time, Blake enjoys outdoor activities like mountain biking, surfing, and climbing, and playing jazz and blues guitar.
Senior Design Final Report (Fin)
The document describes research to improve the heat sink design for a server's Platform Controller Hub (PCH) to increase energy efficiency. Researchers created a digital model of the server and tested various heat sink designs using computational fluid dynamics (CFD) software. The existing extruded fin heat sink was replaced with a cross-cut fin design, which reduced the maximum PCH temperature by 4°C compared to the original design according to CFD and experimental results. This temperature reduction improves the server's overall energy efficiency.
Senior Design Final Presentation (Fin)
The document summarizes heat sink design optimization work for a server. Experimental testing and CFD simulation were used to analyze different heat sink designs. Mini partitions and a vapor chamber were added, lowering the PCH temperature by up to 6%. The final design was a cross-cut fin heat sink with both modifications. The CFD model results matched experimental testing within 5%, validating the simulation approach.
Blf1820 90 pwr mosfet
This document provides product specifications for the BLF1820-90 UHF power LDMOS transistor for use in RF power amplifiers in base station applications from 1800 to 2000 MHz. Key features include output power of 90W, power gain of 12dB, and efficiency of 32% at 26V supply voltage and 500mA drain current. Application information includes typical performance curves and a description of a common source test circuit used to measure parameters like power, efficiency, and intermodulation distortion. Pin assignments, package outline, and status of the data sheet are also provided.
Extensometros variilla
The MPBX multipoint borehole extensometer is designed to monitor changes in distance between downhole anchors set at different depths in a borehole and a surface measurement head. It uses rods connected to anchors that extend up to the head, where measurements are taken. It can have between 1-7 anchors and accommodate measurement ranges from 100-200 mm. Measurements are taken manually or remotely with displacement transducers. The MPBX is used to monitor tunneling, excavations, dams, foundations, and rock/soil displacement.
trial Connector 14183 jst-eph
This document provides specifications for a thin, low-profile 2.0mm pitch connector that is 8.0mm in height and 4.5mm in width. It lists key features such as being compact, highly reliable, and low cost. It then provides detailed specifications for the connector including its current rating, voltage rating, temperature range, contact resistance, insulation resistance, and applicable wire sizes. Dimensional drawings and specifications are given for various models of the connector.
Connector 14183 jst-eph
This document provides specifications for a thin, low-profile 2.0mm pitch connector that is 8.0mm in height and 4.5mm in width. It lists key features such as being compact, highly reliable, and low cost. It then provides detailed specifications for the connector including its current rating, voltage rating, temperature range, contact resistance, insulation resistance, and applicable wire sizes. Dimensional drawings and part numbers for the connector and related tooling are also included.
More Related Content
Viewers also liked
Comunicado de prensa 013-Polo Democratico Alternativo (Caquetá)
El documento anuncia un homenaje al líder político Carlos Gaviria en Caquetá el 14 de abril a las 6:30 pm en AICA. Varios grupos como el Polo Democrático Alternativo PDA Caquetá, la Academia de Historia de Caquetá y la CUT expresan sus condolencias por el fallecimiento de Gaviria, destacado impulsor de la unidad de la izquierda y del PDA. Gaviria murió a los 77 años el 31 de marzo de 2015 en Bogotá debido a problemas respiratorios, después de una destacada
Diabatix - Optimizing your design
The document discusses Diabatix, a company that provides simulation-driven design optimization and virtual prototyping services to optimize heat sink and cooling channel designs. Specifically, Diabatix uses computational fluid dynamics and topology optimization to design problem-specific solutions that increase efficiency and reduce weight and pressure drop compared to traditional trial-and-error approaches. Examples of optimized designs include an S-shaped cooling channel and a heat sink for non-uniform heating.
Advanced cfd electronics cooling analyis
The document discusses advanced CFD modeling of various electronics cooling design options for air management. It analyzes a VME card configuration with dual PMC positions and a high-density memory daughter card. Various heat sink designs are modeled including a baseline aluminum design, an enhanced copper design, and a design using heat pipes. The CFD modeling shows the impact of the different designs on processor junction temperatures under different power and airflow scenarios.
Brainstorming about LED heat management
The document discusses potential design improvements for LED heat management. It proposes:
1) Rearranging LED packages to reduce heat concentration and increase number of packages.
2) Redesigning the heat sink into a cylindrical shape for greater surface area and heat conductivity.
3) Increasing the size and number of copper heat pipes for improved heat transfer.
4) Using a SynJet fan instead of a regular fan for longer life, less dust accumulation, and higher air flow.
5) Redesigning the shell for better air flow and lighter weight.
US8746927_Flexible_Heat_Sink
The patent document describes a lighting fixture that includes an adjustable LED light module and at least one flexible heat sink member thermally coupled to the LED light module. The flexible heat sink member is configured to dissipate heat from the LED light module while allowing adjustment of the module on at least one axis. Specifically, the flexible heat sink terminates near an opening of the lighting fixture housing to dissipate heat outside the housing without interfering with rotation of the adjustable LED light module.
Heat simulator design Problem 1
1. The document presents the design of a microprocessor cooling system to keep the temperature of an Intel Pentium 4 processor below 55°C. Equations are provided to calculate the temperature, heat flux, efficiency, and effectiveness of a heat sink design.
2. A proposed design uses 24 aluminum fins that is within budget and keeps the processor temperature at 52.77°C. The overall height of 24.5mm is less than the maximum of 25mm.
3. Calculations show the design has a heat removal rate of 802 W/m^2, fin efficiency of 23.9%, total efficiency of 24.4%, and effectiveness of 6.1. The design meets all constraints.
Final Project
This document describes a student's final project to design a CPU heat sink using 3D modeling software. It includes steps to model each component of the heat sink, including the fan, heatsink, screws, and brackets. Mass properties, surface analysis, and sustainable design considerations are analyzed. The student found creating curved surfaces challenging but learned about complex surface creation. Analysis of volume, center of mass, and sustainable design selections aligned with engineering fundamentals. Feedback was the course provided a good learning experience but was early in the semester.
Clemens Lasance: LED Junction Temperature, Thermal Resistance PCB
Second sneak peak of Metal Core PCB Design webinar featuring the Thermal Management for LED Applications segment: What is the role of the PCB? by Clemens Lasance, former Principal Scientist Emeritus with Philips Research. With over 30 years experience in the field, Clemens' passion and scrutiny for the subject has established him as the principally renowned expert pertaining to thermal management.
Aluminum Extrusion Design And The Role It Plays In High Performance Cooling S...
The document summarizes a webinar presentation about aluminum extrusion design and its role in high performance cooling solutions. The presentation covers Sapa Group and Sapa Extrusions Americas, considerations for profile and thermal design including geometry, surface finishing and simulation tools. Specific solutions like friction stir welding modular heat sinks and liquid coolers are discussed. Contact information is provided for follow up questions.
52 stephen a. ferranti - 6249437 - heat sink with offset fin profile
Stephen A. Ferranti, John Paul Mello, Madhu Ganesa-Pillai, Amanda C. Reeves, Leon Klafter, Joanne C. Zhang - Heat Sink with Offset Fin Profile
CFD chassis cooling design
Computational fluid dynamics (CFD) is used for chassis design and advanced cooling analysis. A double module with interleaved heat sink fins and tapered pressure balancing plenums at the inlet is analyzed. High power GPUs require innovative cooling designs.
Statistical Analysis of New Product Development (NPD) Cycle-time Data
Alpha Technologies recently concluded a comprehensive study of historical NPD performance data (cost, cycle-time, resource requirements, program type and complexity, plans versus actuals, etc.) and has successfully applied the results of this study to make measureable improvements to their NPD process. Probability-based summary data is used to aide in planning and budgeting, set statistically valid continuous improvement targets for performance scorecards, and develop a visual resource management tool for allocation of human resources to present and future NPD programs.
3 optimum design of heat sink by using differential evolution and simplex me...
This document discusses optimizing the design of a heat sink using differential evolution (DE) and the simplex method. DE was used to minimize the thermal resistance of inline and staggered fin arrangements, finding values of 0.500467 °C/W and 0.4021 °C/W respectively. Parameters like fin diameter, length, number, approach velocity and pitch were varied. Comparisons were made between DE and the simplex method, with DE taking less time to find the minimum thermal resistance for the case study.
Heat Transfer Project
The document discusses heat sink design for cooling electronic systems. It compares different design parameters for heat sinks such as fin material, shape, layout, working fluid, and forcing mechanism. Two solutions are proposed to achieve heat fluxes of 2 kW/m^2 and 200 kW/m^2. Sample calculations are shown for a solution using aluminum fins cooled by forced air to achieve a heat flux of 209.377 kW/m^2.
Six Sigma Project = Internet Sample
The document discusses a project to reduce failures of heat sink mounted components by improving the heat sink assembly process. It aims to determine the highest risk component, identify correlations between field data and production data, set goals to reduce defects by 50%, and analyze the current process capability to identify non-capable processes in need of improvement.
Design Portfolio Draft 3
James C. Blake has a BS in Mechanical Engineering from UCSD. His portfolio includes projects involving the design of a laser Doppler sensor housing, heat sink machining, a motorized micro-alignment mechanism, an indoor electronics enclosure, custom lens mounts, and assembly instructions. He has experience with SolidWorks, Mastercam, prototyping, fabrication, and working with researchers and sponsors. In his personal time, Blake enjoys outdoor activities like mountain biking, surfing, and climbing, and playing jazz and blues guitar.
Senior Design Final Report (Fin)
The document describes research to improve the heat sink design for a server's Platform Controller Hub (PCH) to increase energy efficiency. Researchers created a digital model of the server and tested various heat sink designs using computational fluid dynamics (CFD) software. The existing extruded fin heat sink was replaced with a cross-cut fin design, which reduced the maximum PCH temperature by 4°C compared to the original design according to CFD and experimental results. This temperature reduction improves the server's overall energy efficiency.
Senior Design Final Presentation (Fin)
The document summarizes heat sink design optimization work for a server. Experimental testing and CFD simulation were used to analyze different heat sink designs. Mini partitions and a vapor chamber were added, lowering the PCH temperature by up to 6%. The final design was a cross-cut fin heat sink with both modifications. The CFD model results matched experimental testing within 5%, validating the simulation approach.
Viewers also liked (18)
Comunicado de prensa 013-Polo Democratico Alternativo (Caquetá)
Comunicado de prensa 013-Polo Democratico Alternativo (Caquetá)
Clemens Lasance: LED Junction Temperature, Thermal Resistance PCB
Clemens Lasance: LED Junction Temperature, Thermal Resistance PCB
Aluminum Extrusion Design And The Role It Plays In High Performance Cooling S...
Aluminum Extrusion Design And The Role It Plays In High Performance Cooling S...
52 stephen a. ferranti - 6249437 - heat sink with offset fin profile
52 stephen a. ferranti - 6249437 - heat sink with offset fin profile
Statistical Analysis of New Product Development (NPD) Cycle-time Data
Statistical Analysis of New Product Development (NPD) Cycle-time Data
3 optimum design of heat sink by using differential evolution and simplex me...
3 optimum design of heat sink by using differential evolution and simplex me...
Similar to Heat sink
Blf1820 90 pwr mosfet
This document provides product specifications for the BLF1820-90 UHF power LDMOS transistor for use in RF power amplifiers in base station applications from 1800 to 2000 MHz. Key features include output power of 90W, power gain of 12dB, and efficiency of 32% at 26V supply voltage and 500mA drain current. Application information includes typical performance curves and a description of a common source test circuit used to measure parameters like power, efficiency, and intermodulation distortion. Pin assignments, package outline, and status of the data sheet are also provided.
Extensometros variilla
The MPBX multipoint borehole extensometer is designed to monitor changes in distance between downhole anchors set at different depths in a borehole and a surface measurement head. It uses rods connected to anchors that extend up to the head, where measurements are taken. It can have between 1-7 anchors and accommodate measurement ranges from 100-200 mm. Measurements are taken manually or remotely with displacement transducers. The MPBX is used to monitor tunneling, excavations, dams, foundations, and rock/soil displacement.
trial Connector 14183 jst-eph
This document provides specifications for a thin, low-profile 2.0mm pitch connector that is 8.0mm in height and 4.5mm in width. It lists key features such as being compact, highly reliable, and low cost. It then provides detailed specifications for the connector including its current rating, voltage rating, temperature range, contact resistance, insulation resistance, and applicable wire sizes. Dimensional drawings and specifications are given for various models of the connector.
Connector 14183 jst-eph
This document provides specifications for a thin, low-profile 2.0mm pitch connector that is 8.0mm in height and 4.5mm in width. It lists key features such as being compact, highly reliable, and low cost. It then provides detailed specifications for the connector including its current rating, voltage rating, temperature range, contact resistance, insulation resistance, and applicable wire sizes. Dimensional drawings and part numbers for the connector and related tooling are also included.
Information About Batra Henlay Cables
Batra Henlay Cables provides superior quality copper flexible wires, control instrumentation, telecommunication cables moreover high defined coaxial cables in various forms of insulation to the power, telecommunication, and energy industries.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
BT CATALOGUE
This document provides an overview and catalog of cable products from BT Cables for building infrastructure systems. It contains 7 sections that describe different series of cables for applications like BMS, fire detection, security, data, industrial, and control systems. Each section includes tables that list available cable options based on factors like conductor size and count, screening method, and sheath material. The document aims to help users find the right BT cable for their infrastructure application and system needs.
Instrumentation Cables - Nuhas Oman Catalogue
This document describes Nuhas Oman LLC, a producer of cables and copper products. It provides details about their state-of-the-art facilities, high quality standards, and product certifications. Tables are included that list technical specifications for various instrumentation cable types, including unarmored and armored cables with different conductor sizes and configurations. The document emphasizes Nuhas Oman's commitment to total quality management and product excellence.
TGS Presentation at CART2012
TGS (USA), Inc. presents on their ultra-small package crystals and oscillators with greater precision for RF design applications. They provide an overview of their company including locations, products range from crystals to filters, quality assurance, and upcoming smaller package sizes down to 1.6x1.2mm. They also outline their key competition and advantages, and thank the audience for their time.
2015 SHORT FORM BROCHURE
This document provides information about screw connection terminal blocks, including:
- Screw connection is the most popular connection method where the conductor is clamped without special preparation when the screw is tightened.
- When the screw is tightened, the clamping yoke halves are pulled apart, generating a high locking action on the screw.
- These clamping systems provide excellent vibration resistance.
Dynasonics tfx 500w datasheet badger meter-clamp-on transit time ultrasonic f...
Dynasonics tfx 500w datasheet badger meter-clamp-on transit time ultrasonic flow meters. ĐT: 028 77727979 - sales@envimart.vn - www.envimart.vn
Ft tx presentation to telkom 25092013
This document discusses fiber-to-the-x (FTTx) deployment trends and technologies. It finds that deploying fiber to the most economical point (FTTdp) using a combination of technologies like fiber-to-the-curb with VDSL2 vectoring provides the best balance of cost, speed, and time to market compared to either full fiber-to-the-home or relying solely on copper broadband. Specifically, an analysis of two deployment options over a 10-year period showed that initially deploying VDSL2 and later upgrading to FTTH had a shorter payback period and higher cumulative discounted cash flow than only deploying FTTH from the start.
公司画册
This document provides information on Amisson Fiberoptic(HK)Ltd, a manufacturer and supplier of fiber optic components and cabling systems since 2008. It lists the products they provide such as fiber optic connectors, adapters, pigtails, patchcords, optical cable, fusion splicers, splicing closures, and testing equipment. It also describes their commitment to integrity, honesty, innovation, and competitive pricing to meet customer needs globally.
Wavecom Fiber Lab Catalog
This document provides product information for fiber optic cables, connectors, and accessories from Wave Com. It includes technical specifications for patch cords, pigtails, SC, FC, LC, ST, and DIN connectors. Information is also provided on zip cords, tight buffer fibers, and wavelength performance. Contact information is given for sales and support.
BlueOptics BO57JXX680D 10GBASE DWDM SFP+ Transceiver 80KM Singlemode LC Duple...
This document describes an SFP+ DWDM 10G C-Band optical transceiver that operates at 10Gbps up to 80km on single mode fiber. It provides high-speed data transmission and real-time diagnostic information. The transceiver complies with relevant interoperability standards and safety regulations.
Blueoptics bo54jchxx680d 10gbase-dwdm cdr sfp+ transceiver c-band 80km single...
This document describes an SFP+ DWDM 10G C-Band optical transceiver that operates at 10Gbps up to 80km on single mode fiber. It uses a DWDM EML laser transmitter, APD photodiode receiver, and built-in CDR. Key features include hot-pluggable SFP+ form factor, LC duplex optical interface, digital diagnostics, and operating temperature range of 0-70°C. The transceiver provides 10Gb Ethernet and 10GBase-ZR/ZW connectivity and is RoHS compliant.
Blueoptics bo56jxx640dt2 10gbase-cwdm sfp+ transceiver 40km singlemode lc dup...
This document provides information about a BlueOptics SFP+ transceiver module that operates at 10Gbps with wavelengths between 1470-1610nm and a maximum link length of 40km on single mode fiber. It supports SFP+ MSA compliance and provides digital diagnostics for real-time monitoring of supply voltage, laser bias current, output power, temperature and more.
Euro-Tech Sales 2016 Catalogue
This document provides information about Euro-Tech Cables Pty Ltd, an Australian manufacturer of high technology cables. It describes Euro-Tech's establishment in 1989, manufacturing facilities, product range including communication cables, geotechnical cables, and armoured cables. The document lists Euro-Tech's services, specialised cable designs, and provides contact details and a catalogue contents listing.
Blueoptics bo56hxx640dt2 2-4-8gbase-cwdm sfp+ transceiver 1471nm - 1611nm 40k...
This document provides information about the BO56HXX640DT2 SFP+ optical transceiver module. It is an 8.5Gbps transceiver that operates between 1470-1610nm on single mode fiber with a maximum link length of 40km. The document describes its specifications, features, applications, installation instructions and provides pinout, diagnostic and mechanical details.
Fiber Optic Spitter for PON network
high quality fiber optic splitter is very important for PON network. We offers fully range of fused coupler, PLC splitter for fiber optic communication system. More product information, please check www.fibercablingsystem.com .
Similar to Heat sink (20)
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
Dynasonics tfx 500w datasheet badger meter-clamp-on transit time ultrasonic f...
Dynasonics tfx 500w datasheet badger meter-clamp-on transit time ultrasonic f...
BlueOptics BO57JXX680D 10GBASE DWDM SFP+ Transceiver 80KM Singlemode LC Duple...
BlueOptics BO57JXX680D 10GBASE DWDM SFP+ Transceiver 80KM Singlemode LC Duple...
Blueoptics bo54jchxx680d 10gbase-dwdm cdr sfp+ transceiver c-band 80km single...
Blueoptics bo54jchxx680d 10gbase-dwdm cdr sfp+ transceiver c-band 80km single...
Blueoptics bo56jxx640dt2 10gbase-cwdm sfp+ transceiver 40km singlemode lc dup...
Blueoptics bo56jxx640dt2 10gbase-cwdm sfp+ transceiver 40km singlemode lc dup...
Blueoptics bo56hxx640dt2 2-4-8gbase-cwdm sfp+ transceiver 1471nm - 1611nm 40k...
Blueoptics bo56hxx640dt2 2-4-8gbase-cwdm sfp+ transceiver 1471nm - 1611nm 40k...
Recently uploaded
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on automated letter generation for Bonterra Impact Management using Google Workspace or Microsoft 365.
Interested in deploying letter generation automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
AWS Cloud Cost Optimization Presentation.pptx
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Azure API Management to expose backend services securely
How to use Azure API Management to expose backend service securely
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Operating System Used by Users in day-to-day life.pptx
Dive into the realm of operating systems (OS) with Pravash Chandra Das, a seasoned Digital Forensic Analyst, as your guide. 🚀 This comprehensive presentation illuminates the core concepts, types, and evolution of OS, essential for understanding modern computing landscapes.
Beginning with the foundational definition, Das clarifies the pivotal role of OS as system software orchestrating hardware resources, software applications, and user interactions. Through succinct descriptions, he delineates the diverse types of OS, from single-user, single-task environments like early MS-DOS iterations, to multi-user, multi-tasking systems exemplified by modern Linux distributions.
Crucial components like the kernel and shell are dissected, highlighting their indispensable functions in resource management and user interface interaction. Das elucidates how the kernel acts as the central nervous system, orchestrating process scheduling, memory allocation, and device management. Meanwhile, the shell serves as the gateway for user commands, bridging the gap between human input and machine execution. 💻
The narrative then shifts to a captivating exploration of prominent desktop OSs, Windows, macOS, and Linux. Windows, with its globally ubiquitous presence and user-friendly interface, emerges as a cornerstone in personal computing history. macOS, lauded for its sleek design and seamless integration with Apple's ecosystem, stands as a beacon of stability and creativity. Linux, an open-source marvel, offers unparalleled flexibility and security, revolutionizing the computing landscape. 🖥️
Moving to the realm of mobile devices, Das unravels the dominance of Android and iOS. Android's open-source ethos fosters a vibrant ecosystem of customization and innovation, while iOS boasts a seamless user experience and robust security infrastructure. Meanwhile, discontinued platforms like Symbian and Palm OS evoke nostalgia for their pioneering roles in the smartphone revolution.
The journey concludes with a reflection on the ever-evolving landscape of OS, underscored by the emergence of real-time operating systems (RTOS) and the persistent quest for innovation and efficiency. As technology continues to shape our world, understanding the foundations and evolution of operating systems remains paramount. Join Pravash Chandra Das on this illuminating journey through the heart of computing. 🌟
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Recently uploaded (20)
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Azure API Management to expose backend services securely
Azure API Management to expose backend services securely
Operating System Used by Users in day-to-day life.pptx
Operating System Used by Users in day-to-day life.pptx
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Heat sink
- 1. JunPus International Co., Ltd. Ceramic Heat Sink!!!!!"#$%&'()*+,%-.($%%
- 2. "#$%&'()*+(#$%&',$+) Feature: 1.Big air-contact area, good heat spreader. 2.Low weight 3.Easy to assemble 4.High Voltage Breakdown 5.High Resistance 6.The special shape can be ordered JunPus
- 3. "#$%&'()*+(#$%&',$+) JunPus
- 4. ITEM PART NO. SPEC. APPLICATION 1 MPS101020BTF Flat Type_10*10*2.0(mm) POWER IC ; High Temp. Component ; Transistor 2 MPS151020BTF Flat Type_15*10*2.0(mm) POWER IC ; High Temp. Component ; Transistor 3 MPS151525BTF Flat Type_15*15*2.5(mm) POWER IC ; High Temp. Component ; Transistor 4 MPS201525BTF Flat Type_20*15*2.5(mm) POWER IC ; High Temp. Component ; Transistor MPS202025BTF Flat Type_20*20*2.5(mm) STB ; AP ROUTER ; G PON ; Cable Modem ; BroadBand ; LED TV 5 6 MPS252525BTF Flat Type_25*25*2.5(mm) STB ; AP ROUTER ; G PON ; Cable Modem ; BroadBand ; LED TV 7 MPS303025BTF Flat Type_30*30*2.5(mm) STB ; AP ROUTER ; Cable Modem ; BroadBand ; VOIP 8 MPS404025BTF Flat Type_40*40*2.5(mm) STB ; AP ROUTER ; Cable Modem ; BroadBand ; LED TV (SCALAR IC) 9 MPS303050BTF Flat Type_30*30*5.0(mm) STB ; AP ROUTER ; Cable Modem ; BroadBand ; LED TV (SCALAR IC) 10 MPS404050BTF Flat Type_40*40*5.0(mm) STB ; AP ROUTER ; Cable Modem ; BroadBand ; LED TV (SCALAR IC) Length : 10<L<50(mm) ; Width:10<W<50(mm) ; Thickness:2.5<T<6(mm) 11 Custom-made Remark : L:W > 1:2 JunPus
- 5. Patent JunPus