ALION H3CR series Multi-range analogue timer is a
time-limited type of timer. It have a variety of time
setting ranges and voltages you can choose, it
mainly used for equipment control.
ATDV series multi range analogue timer relayBeite Xu
ALION ATDV series analogue timer is a time-limited
type of timer. It have a variety of time setting
ranges and voltages you can choose, it mainly used
for equipment control.
This Paper analyses about different stabilizing topology and different design which is based upon tapping the relay for different supply voltages to get nearly 220V value for each variation of supply to drive the load risk freely, thus stabilizing the output voltage.
RunnTech F100 Series Proportional Accelerator PedalRunnTech Controls
RunnTech F100 Proportional Accelerator Pedal is mainly used in hydraulic proportional control and variable frequency motor control, such as Rotary Drilling Rig, Aerial Fire Engine, Battery Cars, etc.
RunnTech F200 Series Accelerator Foot Pedal is equipped with a Hall Effect non-contact sensor that can be programmed for analog output and mainly used in hydraulic proportional control and electronic throttle control systems.
ATDV series multi range analogue timer relayBeite Xu
ALION ATDV series analogue timer is a time-limited
type of timer. It have a variety of time setting
ranges and voltages you can choose, it mainly used
for equipment control.
This Paper analyses about different stabilizing topology and different design which is based upon tapping the relay for different supply voltages to get nearly 220V value for each variation of supply to drive the load risk freely, thus stabilizing the output voltage.
RunnTech F100 Series Proportional Accelerator PedalRunnTech Controls
RunnTech F100 Proportional Accelerator Pedal is mainly used in hydraulic proportional control and variable frequency motor control, such as Rotary Drilling Rig, Aerial Fire Engine, Battery Cars, etc.
RunnTech F200 Series Accelerator Foot Pedal is equipped with a Hall Effect non-contact sensor that can be programmed for analog output and mainly used in hydraulic proportional control and electronic throttle control systems.
1. Single-channel constant current output, selected by Dip-switch 2. Support Leading edge (Triac) and Trailing edge (ELV) dimming 3. Dimming range from 40VAC to 240V AC.
4. Dimming effect smooth, no flicker z High efficiency up to 82%.
5. Short current protection
6. Suitable for indoor LED lighting application, such as down light, panel light, and so on
ABB Contactors - 4 Pole Contactors ABB AF09 AF09Z (AC DC) Contactors
ABB Extended Product Type:
ABB AF09-40-00-11
ABB Product ID:
1SBL137201R1100
EAN: 3471523115019
ABB Catalogue Description:
ABB 4 Pole Contactors : AF09-40-00-11 24-60V50/60HZ 20-60VDC Contactor
ABB AF09 4-pole contactors are used for controlling power circuits up to 690 V AC and 440 V DC. ABB AF09 contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...). ABB AF09 contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. ABB AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. ABB AF contactors have built-in surge protection and do not require additional surge suppressors. The ABB AF... series 4-pole contactors are of the block type design. Main poles and auxiliary contact blocks: 4 N.O. main poles, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Note: - AF..-..-..-11 not suitable for a direct control by PLC-output. - ABB AF..-..-..-11 type available in some countries: please consult Thorne & Derrick t 00 44 191 4901547
1. Single-channel constant current output, selected by Dip-switch
2. Support Leading edge (Triac) and Trailing edge (ELV) dimming
3. Dimming range from 40VAC to 240V AC.
4. Dimming effect smooth, no flicker
5. High efficiency up to 81%.
6. Short current protection
7. Suitable for indoor LED lighting application, such as down light, panel light, and so on
RunnTech W200 Single Axis Fingertip Joystick is mainly used in hydraulic proportional control and variable frequency motor control, such as remote control chest packs and the control of construction, agricultural, material handling equipment or lifting equipment, etc.
Catalog thiết bị đóng cắt Fuji Electric - 12 - VCB & VMC
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
RunnTech H100 multifunction control handle (tiller head) is attractive, ergonomic and practical function control handles used in electric pallet truck/jacks, walkie-stackers and tow tractors, pedestrian industrial truck, transport trolleys, cleaning machinery, special applications, etc. These control handle include an electronic throttle mechanism and an emergency switch, and may be equipped with a variety of functional options, including switches (horn, lift, lower), throttle and instrumentation.
ST3P series multi range analogue timer relayBeite Xu
ALION ST3P series Multi-range analogue timer is a
time-limited type of timer. It have a variety of time
setting ranges and voltages you can choose, it
mainly used for equipment control.
ALION H3BA series Multi-range analogue timer is a
time-limited type of timer. It have a variety of time
setting ranges and voltages you can choose, it
mainly used for equipment control.
ALION AH2 series analogue timer relay is a time-limited type
of timer. It have a variety of time setting ranges and
voltages you can choose, it mainly used for
equipment control.
1. Single-channel constant current output, selected by Dip-switch 2. Support Leading edge (Triac) and Trailing edge (ELV) dimming 3. Dimming range from 40VAC to 240V AC.
4. Dimming effect smooth, no flicker z High efficiency up to 82%.
5. Short current protection
6. Suitable for indoor LED lighting application, such as down light, panel light, and so on
ABB Contactors - 4 Pole Contactors ABB AF09 AF09Z (AC DC) Contactors
ABB Extended Product Type:
ABB AF09-40-00-11
ABB Product ID:
1SBL137201R1100
EAN: 3471523115019
ABB Catalogue Description:
ABB 4 Pole Contactors : AF09-40-00-11 24-60V50/60HZ 20-60VDC Contactor
ABB AF09 4-pole contactors are used for controlling power circuits up to 690 V AC and 440 V DC. ABB AF09 contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...). ABB AF09 contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. ABB AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. ABB AF contactors have built-in surge protection and do not require additional surge suppressors. The ABB AF... series 4-pole contactors are of the block type design. Main poles and auxiliary contact blocks: 4 N.O. main poles, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Note: - AF..-..-..-11 not suitable for a direct control by PLC-output. - ABB AF..-..-..-11 type available in some countries: please consult Thorne & Derrick t 00 44 191 4901547
1. Single-channel constant current output, selected by Dip-switch
2. Support Leading edge (Triac) and Trailing edge (ELV) dimming
3. Dimming range from 40VAC to 240V AC.
4. Dimming effect smooth, no flicker
5. High efficiency up to 81%.
6. Short current protection
7. Suitable for indoor LED lighting application, such as down light, panel light, and so on
RunnTech W200 Single Axis Fingertip Joystick is mainly used in hydraulic proportional control and variable frequency motor control, such as remote control chest packs and the control of construction, agricultural, material handling equipment or lifting equipment, etc.
Catalog thiết bị đóng cắt Fuji Electric - 12 - VCB & VMC
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
RunnTech H100 multifunction control handle (tiller head) is attractive, ergonomic and practical function control handles used in electric pallet truck/jacks, walkie-stackers and tow tractors, pedestrian industrial truck, transport trolleys, cleaning machinery, special applications, etc. These control handle include an electronic throttle mechanism and an emergency switch, and may be equipped with a variety of functional options, including switches (horn, lift, lower), throttle and instrumentation.
ST3P series multi range analogue timer relayBeite Xu
ALION ST3P series Multi-range analogue timer is a
time-limited type of timer. It have a variety of time
setting ranges and voltages you can choose, it
mainly used for equipment control.
ALION H3BA series Multi-range analogue timer is a
time-limited type of timer. It have a variety of time
setting ranges and voltages you can choose, it
mainly used for equipment control.
ALION AH2 series analogue timer relay is a time-limited type
of timer. It have a variety of time setting ranges and
voltages you can choose, it mainly used for
equipment control.
ST2P series multi range analogue timer relayBeite Xu
ALION ST2P Multi-range analogue timer relay is a time-limited
type of timer. It have a variety of time setting
ranges and voltages you can choose, it mainly used
for equipment control.
AH3 series multi range analogue timer relayBeite Xu
ALION AH3 series Multi-range analogue timer is a
time-limited type of timer. It have a variety of time
setting ranges and voltages you can choose, it
mainly used for equipment control.
ALION AHD16T astronomical time switch automatically
turn ON/OFF at the preset longitude and latitude,
time zone. You don't need to adjust your timer to
keep up with changing sunrise/sunset times.
ALION AHD16T-U astronomical time switch allows you to
quickly copy the set of programs through the Memory
key, without computer or smart phone. Automatically
turn ON/OFF at the preset longitude and latitude, time
zone. You don't need to adjust your timer to keep up
with changing sunrise/sunset times.
ALION AHC10 daily program analog time switch is
programmed pushing on switching segments, it's
quickly read and easy to change. The shortest
switching time is 30 minutes and it can switching
with Permanent ON/ OFF.
Catalog thiết bị đóng cắt Fuji Electric - 01 - Contactor
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
katalog fluke digital multimeter, jual fluke digital multimeter, beli, info,harga, spesifikasi review.
Untuk informasi dan pemesanan hubungi :
sales@tridinamika.com
lihat produk lainnya di :
www.tridinamika.com
Catalog Contactor Fuji Electric - Beeteco.comBeeteco
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam, Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
Công ty cổ phần Hạo Phương xin gửi đến Quý Khách hàng bộ catalog các dòng Contactor Fuji Electric mới nhất 2019 bao gồm: contactor SK, contactor SC, contactor FJ.
Contactor (Khởi động từ) Fuji Electric là dòng sản phẩm thuộc nhóm thiết bị đóng ngắt mạch điện. Các sản phẩm Fuji hiện đang được phân phối bởi Công ty Hạo Phương, nhà phân phối thiết bị điện và là nhà tích hợp hệ thống hàng đầu Việt Nam.
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY TNHH HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 - KĐT Mỹ Đình Sông Đà - Phường Mỹ Đình - Q. Nam Từ Liêm - Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com - Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
ALION AHC808 digital time switch is a small size timer
but the function very diverse. It does not take up
space, and good match with other elec tr ic al
components in the distribution box.
Catalog thiết bị đóng cắt Fuji Electric - 05 - Limit Switch
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Katalog fluke-oscilloscope-the-toughest-scopes-ever-built-by-tridinamika,
jual fluke oscilloscope, harga, beli, info, spesifikasi dan review
untuk informasi lebih lanjut kunjungi
www.tridinamika.com
untuk pemesanan dan pertanyaan hubungi via email
sales@tridinamika.com
ALION ALST8 staircase time switch from ALION is
available in DIN rail. It runtime from 1 minute to 7
minutes, and fitted with electronic overload protection.
ALION ALC18 series staircase time switches from ALION
are available in DIN rail. It runtime is between 30
seconds and 20 minutes, and fitted with electronic
overload protection.
ALION AHC810 series Din rail yearly program digital time
switch has a wide screen, display more information,
and it has seven kinds of language for choice.
ALION AHC610 series can be complete switching program of
the present day at a glance. Large, clear and
illuminated display with one text line. Quick and
intuitive to set your program.
AHC15T series digital astronomical time switchBeite Xu
ALION AHC15T astronomical time switch automatically turn
ON/OFF at the preset sunrise/sunset time based on
your location. You don't need to adjust your timer to
keep up with changing sunrise/sunset times.
ALION AHC15D Wide voltage time switch is designed for
multiple voltage in some countries or regions, unit is
also suitable to multinational companies to reduce the
stock for the same product in the different market.
AHC15A-U series digital weekly time switchBeite Xu
ALION AHC15U allows you to quickly copy the set of
programs through the Memory key, without computer
or smartphone. It can drastically reduce duplication
of work. The unit is applicable to large projects who need
to set up a large number of timers for the same
program.
ALION AHC712 analog time switch is designed to be
mounted inside a control panel and can accommodate
surface or flush panel mounting. The AHC712 analogue
time switches is a light duty commercial time switch
just for 230 VAC 50Hz single-phase applications.
ALION AHC181h daily program analog time switches
are programmed using switching segments, it is easy
to change the battery. The shortest switching time is
30 minutes. It can switching with continuous
ON/AUTO/continuous OFF.
ALION AHC181d daily program analog time switches
are programmed using switching segments, it is easy
to change the battery. The shortest switching time is
15 minutes. It can switching with continuous
ON/AUTO/continuous OFF.
ALION AHC180b mechanical time switch is a simple
and low-cost alternative for applications that do not
require more than 16Amp. It is designed for 24-hour
control or overriding a functional typical state of a
heating, ventilation, refrigeration, lighting, security, or
pump system.
ALION AH711/710 analog time switches are designed to be
mounted inside a control panel and can accommodate
surface or flush panel mounting. It is a light duty
commercial time switch for 12, 24 VDC, 120 or 240
VAC single-phase applications.
ALION TBS-F analog time switches are the affordable
cost alternative for applications that require more than
20A and wide voltage 110-230 VAC. Unit is
mounted in a plastic enclosure.
ALION TB388S analog time switches are the affordable
cost alternative for applications that require more than
20A and wide voltage 110-230 VAC. Unit is
mounted in a plastic enclosure.
ALION TB388B analog time switches are the affordable
cost alternative for applications that require more than
20A and wide voltage 110-230 VAC. The unit is
mounted in a metal enclosure.
ALION TB388 analog time switch is a affordable cost
alternative for applications that require more than 20
A and wide voltage 110-230 VAC. Unit can be
mounted in the indoor or outdoor enclosure.
Sul181h syn161h analogue daily time switchBeite Xu
ALION SUL181h/SYN161h daily program analogue time
switches are programmed using switching segments,
it's quick read and easy to change. The shortest
switching time is 30 minutes and it can switching
with continuous ON/AUTO/continuous OFF.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
1. WENZHOU ALION ELECTRONICS CO. LTD
NO.221 Weiershi Road,
Yueqing Economic Development Zone
Wenzhou, China 325600
Tel: 0086-577-62772897
Fax: 0086-577-62782897
E-mail: info@aliontimer.com
www.alion.com.cn
H3CR series Multi-range analogue timer
Timer
The H3CR series Multi-range analogue timer is a
time-limited type of timer. It have a variety of time
setting ranges and voltages you can choose, it
mainly used for equipment control.
Description
● Multi-range analogue timer
● Time setting range of 0.05s to 100h
● Wide operating voltage range in a single unit
● Output Contacts rated 5A at 120/240 VAC and 30 VDC, resistive load.
● 8 field-selectable output modes for various applications
● 14 field-selectable time range, from 0.2 second to 300 hour
● Includes 2C output contacts, instantaneous output contact, flicker and interval modes
Product selection
Technical date
Indicator operating Time operating flicker
Contact rating 250VAC 5A (resistive load)
Life
Mechanical 5×107times
Electrical 1×105times
Type Mounting﹠Socket Output contact Time range Operation voltage
H3CR-A
Surface(-N): PS-08
Flush(-Y): US-08
P3G-08
2C
0.5Seconds-
300Hours
100-240VAC;
100-125VDC;
24-48VDC;
12-48VDC;
DC(V):12,24;
AC(V):110,220
50/60 Hz
Allowable 85~110% of
rated operating
voltage
H3CR-A8
Surface(-N): PF-
113A(E)
Flush(-Y): US-11
2. WENZHOU ALION ELECTRONICS CO. LTD
NO.221 Weiershi Road,
Yueqing Economic Development Zone
Wenzhou, China 325600
Tel: 0086-577-62772897
Fax: 0086-577-62782897
E-mail: info@aliontimer.com
www.alion.com.cn
Wiring diagram
Timer
Accuracy
Repeat error ±1.0%max
Setting error ±5.0%max
Voltage error ±1.0%max
Temperature error ±2.0%max
Reset time Max 0.5sec
Insulation resistance 100MΩ(DC 500V)min
Class of protection 1500VAC
Permitted ambient temperature -10 ~ +50 °C (non-icing)
Power consumption 100-240VAC:1VA; 12VDC,24-240VDC:1.5W
H3CR-A H3CR-A8
Dimensions