Groschopp 66362 specsheet
•
0 likes•77 views
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 30:1 ratio RP 7300 gearbox. Key specifications include a voltage of 115v, speed of 3000 rpm, output speed of 100.1 rpm, output torque of 106.7 lb-in, and current of 2.64 amps. Start/stall conditions are listed as 4.88 amps and 98.36 lb-in of torque. Charts provide efficiency and torque vs speed data under cold and hot operating conditions. The motor, gearbox, and system efficiencies are 56.8%, 75.2%, and 42.8% respectively.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 66361 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 20:1 ratio RP 7300 gearbox. The motor operates at 115V 60Hz with a speed of 3000rpm. It has an output of 165.4rpm, 24.5lb-in of torque, and 48 watts of power at 0.0644HP. Charts show speed, torque, efficiency at various loads from cold start up to hot running conditions. The motor and gearbox are sold and serviced by Electromate.
Groschopp 66360 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 10:1 ratio gearbox. Key specifications include an output speed of 300.2 rpm, torque of 31.9 lb-in, current of 2.64 amps, and power output of 113 watts or 0.1521 HP. Charts show torque and speed characteristics along with efficiency curves for cold and hot operation.
Groschopp 74510 specsheet
This document provides specifications for a motor including its AC voltage, speed in RPM, gearbox ratio, product ID number, ratings for speed, torque, current and output. It also details startup conditions, duty cycle, efficiencies of the gearbox, motor and system, and graphs showing speed, torque and efficiency curves for cold and hot operation. The motor is sold and serviced by Electromate.
Groschopp 47760 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a 320:1 ratio gearbox. Key specifications include a voltage of 115v, speed of 3060 rpm, output of 9.6 rpm and 125 lb-in of torque. Charts show torque and efficiency at varying speeds under cold and hot operating conditions. The motor has a continuous duty cycle and efficiency of 49.3% for the motor alone and 20.1% for the overall system. It requires a 16uF 250V capacitor.
Groschopp 47763 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a PS 1900 25:1 ratio gearbox. Key specifications include a voltage of 115V 60Hz, a no-load speed of 2990 rpm, a full-load speed of 119.6 rpm, and a full-load torque of 22.2 lb-in. Charts show torque and efficiency curves across a range of speeds. The motor has a continuous duty cycle and system efficiency of 28.9% under full-load conditions.
Groschopp 66365 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to a RP 7300 90:1 ratio gearbox. The motor has an output of 33.4 rpm and 304.9 lb-in of torque at 2.64 amps and 120 watts or 0.1614 HP. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The motor has a continuous duty cycle with peak startup current of 4.88 amps and 284.11 lb-in of torque.
Groschopp 66389 specsheet
This document provides specifications for an AC induction motor with a 61:1 gearbox including voltage, speed, torque, current, efficiency and start/stall conditions. Key specs listed are a 230V 60Hz motor running at 1510rpm, delivering 24.8rpm and 91.8lb-in of torque at 0.38amps and 27watts, with a maximum torque of 156.74lb-in. The gearbox, motor and system efficiencies are 64.2%, 48.6% and 31.2% respectively, and startup requires 0.68amps to produce 86.45lb-in of torque. Performance charts also show efficiency and torque curves versus speed.
Groschopp 66363 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 40:1 ratio gearbox. Key specifications include an output of 75.0 rpm and 139.1 lb-in of torque drawing 2.64 amps of current. Charts show torque and efficiency at varying speeds both when cold and hot. The motor, gearbox and system efficiencies are listed as 56.8%, 73.5% and 41.8% respectively.
Recommended
Groschopp 66361 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 20:1 ratio RP 7300 gearbox. The motor operates at 115V 60Hz with a speed of 3000rpm. It has an output of 165.4rpm, 24.5lb-in of torque, and 48 watts of power at 0.0644HP. Charts show speed, torque, efficiency at various loads from cold start up to hot running conditions. The motor and gearbox are sold and serviced by Electromate.
Groschopp 66360 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 10:1 ratio gearbox. Key specifications include an output speed of 300.2 rpm, torque of 31.9 lb-in, current of 2.64 amps, and power output of 113 watts or 0.1521 HP. Charts show torque and speed characteristics along with efficiency curves for cold and hot operation.
Groschopp 74510 specsheet
This document provides specifications for a motor including its AC voltage, speed in RPM, gearbox ratio, product ID number, ratings for speed, torque, current and output. It also details startup conditions, duty cycle, efficiencies of the gearbox, motor and system, and graphs showing speed, torque and efficiency curves for cold and hot operation. The motor is sold and serviced by Electromate.
Groschopp 47760 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a 320:1 ratio gearbox. Key specifications include a voltage of 115v, speed of 3060 rpm, output of 9.6 rpm and 125 lb-in of torque. Charts show torque and efficiency at varying speeds under cold and hot operating conditions. The motor has a continuous duty cycle and efficiency of 49.3% for the motor alone and 20.1% for the overall system. It requires a 16uF 250V capacitor.
Groschopp 47763 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a PS 1900 25:1 ratio gearbox. Key specifications include a voltage of 115V 60Hz, a no-load speed of 2990 rpm, a full-load speed of 119.6 rpm, and a full-load torque of 22.2 lb-in. Charts show torque and efficiency curves across a range of speeds. The motor has a continuous duty cycle and system efficiency of 28.9% under full-load conditions.
Groschopp 66365 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to a RP 7300 90:1 ratio gearbox. The motor has an output of 33.4 rpm and 304.9 lb-in of torque at 2.64 amps and 120 watts or 0.1614 HP. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The motor has a continuous duty cycle with peak startup current of 4.88 amps and 284.11 lb-in of torque.
Groschopp 66389 specsheet
This document provides specifications for an AC induction motor with a 61:1 gearbox including voltage, speed, torque, current, efficiency and start/stall conditions. Key specs listed are a 230V 60Hz motor running at 1510rpm, delivering 24.8rpm and 91.8lb-in of torque at 0.38amps and 27watts, with a maximum torque of 156.74lb-in. The gearbox, motor and system efficiencies are 64.2%, 48.6% and 31.2% respectively, and startup requires 0.68amps to produce 86.45lb-in of torque. Performance charts also show efficiency and torque curves versus speed.
Groschopp 66363 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 40:1 ratio gearbox. Key specifications include an output of 75.0 rpm and 139.1 lb-in of torque drawing 2.64 amps of current. Charts show torque and efficiency at varying speeds both when cold and hot. The motor, gearbox and system efficiencies are listed as 56.8%, 73.5% and 41.8% respectively.
Groschopp 47758 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a PS 1900 60:1 ratio gearbox. The motor operates at 115V 60Hz and has a no-load speed of 3060 rpm. Key specifications include an output speed of 51.0 rpm, torque of 30.9 lb-in, and current of 0.62 amps at an output power of 19 watts and 0.0250 HP. A breakdown test showed a speed of 40.3 rpm and torque of 51.47 lb-in, while a pullup test had 0 rpm speed and 27.30 lb-in torque. The motor has a continuous duty cycle and efficiency of 49.4% for the motor alone
Groschopp 66038 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a PL 7300 10:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1510 rpm, output of 152.2 rpm and 49.3lb-in of torque. Performance charts show speed, torque and efficiency at varying loads from start up to maximum output. The motor has a continuous duty cycle and system efficiency of 48.5%.
Groschopp 66377 specsheet
This document provides specifications for a 1 Ph 8040 TENV AC motor with a 61:1 ratio gearbox. Key specifications include a rated output of 24.7 rpm and 92.3 lb-in of torque at 0.76 amps and 27 watts. Breakdown torque is 157.43 lb-in at 18.7 rpm, and startup torque is 88.12 lb-in at 0 rpm. The gearbox, motor and system efficiencies are 64.3%, 47.8% and 30.7% respectively. The motor draws 1.34 amps and provides 88.12 lb-in of torque at startup. Speed and efficiency curves are provided for both cold and hot operation.
Groschopp 47765 specsheet
This document provides specifications for a 1 Ph 6540 TEFC AC motor with a 45:1 ratio PS 1900 gearbox. Key specifications include a voltage of 115v, speed of 2990 rpm, output of 66.4 rpm at 40.0lb-in of torque drawing 0.98 amps of current. Charts show speed, torque, efficiency at various loads from startup to maximum. The motor has a continuous duty cycle and efficiency of 49.2% for the motor and 29.0% for the overall system. It stalls at 1.90 amps and 38.26 lb-in of torque.
Groschopp 66024 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a 5:1 ratio gearbox. Key specifications include a voltage of 230v 60Hz, speed of 1540 rpm, and output of 0.0628 HP at 309.5 rpm. Charts show torque and efficiency at varying speeds when cold and hot. The motor has a continuous duty cycle and start/stall current of 1.08 amps. It is sold and serviced by Electromate.
Groschopp 47757 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a 45:1 ratio PS 1900 gearbox. Key specifications include a voltage of 115v, speed of 3060 rpm, output speed of 67.9 rpm, output torque of 23.3lb-in, current of 0.62 amps, and output power of 19 watts. Charts show speed, torque, efficiency at various torques from 0-90 lb-in. The motor has a continuous duty cycle and efficiencies of 49.4% for the motor, 53.2% for the gearbox, and 26.3% for the system. It is sold and serviced by Electromate.
Groschopp 47756 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, product ID, ratings for speed, torque, current and output. It also details breakdown, pullup, duty cycle, efficiency and start/stall conditions. Performance curves are shown for speed, torque and efficiency under cold and hot operating conditions. Notes indicate it uses a 16uF 250V capacitor and is sold and serviced by Electromate.
Groschopp 47753 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 10:1 ratio gearbox. The motor runs at 3060 rpm on 115V 60Hz power and outputs 305.7 rpm through the gearbox. Key specifications include an output of 26 watts at 0.0353 HP as well as start/stall current of 1.32 amps and torque of 6.42 lb-in. Charts show efficiency curves for torque, speed, and temperature. The motor and gearbox are sold and serviced by Electromate.
Groschopp 66392 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 230V 60Hz voltage and 1510rpm speed that is connected to an RP 7300 160:1 ratio gearbox. Key specifications include an output speed of 9.4rpm, torque of 233.4lb-in, current of 0.38amps, and efficiency rates for the gearbox, motor, and system. Performance charts also show torque and speed curves from 0 to 360rpm under cold and hot operating conditions.
Groschopp 05316 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 230V, speed of 3130 rpm, and no gearbox. Key specifications include a rating of 3126.6 rpm at 2.6lb-in of torque drawing 0.72 amps of current. Charts show torque and efficiency at varying speeds both when cold and hot, with maximum efficiency of 61.8%. Start/stall conditions draw 1.37 amps at 2.2 lb-in of torque.
Groschopp 10354 specsheet
This document provides specifications for a PM 6015 motor with a RA 3000T 15:1 ratio gearbox. Key specifications include a voltage of 130V DC, speed of 2500 rpm, output speed of 169.9 rpm, torque of 16.0lb-in, current of 0.66 amps, and efficiency of 39.4% for the overall system. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 66035 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a 246:1 ratio PL 7300 gearbox. Key specifications include a rated output of 6.3 rpm and 630 lb-in of torque drawing 0.4 amps of current. Breakdown and pullup tests were also performed showing speeds of 3.9 rpm and 0 rpm with torques of 1309.57 lb-in and 1177.36 lb-in respectively. Efficiency levels of the gearbox, motor and system are provided along with start/stall current and torque values and a chart showing efficiency at varying speeds and torques.
Groschopp 10325 specsheet
This document provides specifications for a motor and gearbox system including a PM 6015 24V DC motor with a RA 3000T 40:1 ratio gearbox. Key specifications listed include a no load speed of 59.5 rpm, torque of 34.4 lb-in, current of 3.3 amps, and power output of 24 watts or 0.0324 HP. Efficiencies are provided for the gearbox (42.3%), motor (76.1%), and overall system (32.2%). Start/stall current and torque are also specified along with torque-speed and efficiency curves. The system is sold and serviced by Electromate.
Groschopp 47759 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a 240:1 ratio PS 1900 gearbox. Key specifications include a voltage of 115v, speed of 3060 rpm, output of 13.0 rpm and 125.0lb-in of torque. Charts show torque and efficiency at varying speeds for cold and hot operation. The motor has a continuous duty cycle and system efficiency of 28.8%.
Groschopp 47764 specsheet
This document provides specifications for a 1 Ph 6540 TEFC AC motor with a 30:1 ratio PS 1900 gearbox. The motor operates at 115V 60Hz with a no-load speed of 2990 rpm. Key specifications include a no-load speed of 99.6 rpm, torque of 30.9 lb-in, current of 0.98 amps, and power output of 36 watts. Performance charts show speed, torque, efficiency at various loads from start up to maximum rated operation.
Groschopp 10327 specsheet
This document provides specifications for a PM 6015 motor with a 7.5:1 ratio RA 2600T gearbox. Key specifications include a voltage of 90V DC, speed of 2500 rpm, output speed of 331.6 rpm, torque of 4.7 lb-in, current of 0.89 amps, and power output of 18 watts. Charts show torque, speed, efficiency, and start/stall conditions over various loads on the motor and gearbox system.
Groschopp 66375 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 115V 60Hz voltage and 1510 rpm speed that is connected to an RP 7300 30:1 ratio gearbox. Key specifications include a no-load speed of 50.2 rpm, stall torque of 30.52 lb-in, continuous duty cycle, and system efficiency of 21.9%. Performance charts show torque and speed output at various conditions, along with efficiency.
Groschopp 66364 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 61:1 ratio gearbox. The motor has an output speed of 49.2 rpm, torque of 220.1 lb-in, and current of 2.64 amps, drawing 128 watts of power equivalent to 0.1718 HP. Startup current is 4.88 amps with 205.59 lb-in of torque. The gearbox and motor efficiencies are 76.3% and 56.8% respectively, resulting in a system efficiency of 43.4%. Performance charts provide speed, torque, efficiency and other data points under cold and hot
Groschopp 74533 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to an RA 3000T 25:1 ratio gearbox. Key specifications include a no-load speed of 60.9 rpm, stall torque of 167.72 lb-in, continuous duty cycle, and maximum efficiencies of 60.2% for the gearbox and 58.4% for the motor. Performance charts show torque, speed, and efficiency characteristics under cold and hot operating conditions. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 66366 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a RP 7300 120:1 ratio gearbox. The motor runs at 115v 60Hz with a speed of 3000 rpm and 2 poles. It has an output of 25.6 rpm, 356.5 lb-in of torque, and 0.1448 HP while drawing 2.49 amps of current and producing 108 watts of power. Charts show torque, speed, and efficiency at various points. It has a continuous duty cycle and efficiencies of 55.8% for the motor, 68.8% for the gearbox, and 38.4% for the overall system.
Groschopp 74502 specsheet
This document provides specifications for a 3 phase 8040 TEFC AC motor with a 230V 60Hz voltage and 1510 rpm speed connected to a RA 2600T 15:1 ratio gearbox. The motor has a rated output of 101.5 rpm, 57.5 lb-in of torque, and 0.67 amps of current. Breakdown and pullup tests were also performed, providing speed, torque, current and efficiency data across a range of torques and rpm. The motor, gearbox and system efficiencies are listed as well as start/stall current and torque conditions.
Groschopp 74534 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to an RA 4000T 15:1 ratio gearbox. The motor and gearbox combination has a rated output of 101.5 rpm and 50.5 lb-in of torque while drawing 0.67 amps of current. Charts show the system's torque, speed, and efficiency characteristics at various operational conditions including startup, continuous operation, and breakdown.
More Related Content
What's hot
Groschopp 47758 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a PS 1900 60:1 ratio gearbox. The motor operates at 115V 60Hz and has a no-load speed of 3060 rpm. Key specifications include an output speed of 51.0 rpm, torque of 30.9 lb-in, and current of 0.62 amps at an output power of 19 watts and 0.0250 HP. A breakdown test showed a speed of 40.3 rpm and torque of 51.47 lb-in, while a pullup test had 0 rpm speed and 27.30 lb-in torque. The motor has a continuous duty cycle and efficiency of 49.4% for the motor alone
Groschopp 66038 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a PL 7300 10:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1510 rpm, output of 152.2 rpm and 49.3lb-in of torque. Performance charts show speed, torque and efficiency at varying loads from start up to maximum output. The motor has a continuous duty cycle and system efficiency of 48.5%.
Groschopp 66377 specsheet
This document provides specifications for a 1 Ph 8040 TENV AC motor with a 61:1 ratio gearbox. Key specifications include a rated output of 24.7 rpm and 92.3 lb-in of torque at 0.76 amps and 27 watts. Breakdown torque is 157.43 lb-in at 18.7 rpm, and startup torque is 88.12 lb-in at 0 rpm. The gearbox, motor and system efficiencies are 64.3%, 47.8% and 30.7% respectively. The motor draws 1.34 amps and provides 88.12 lb-in of torque at startup. Speed and efficiency curves are provided for both cold and hot operation.
Groschopp 47765 specsheet
This document provides specifications for a 1 Ph 6540 TEFC AC motor with a 45:1 ratio PS 1900 gearbox. Key specifications include a voltage of 115v, speed of 2990 rpm, output of 66.4 rpm at 40.0lb-in of torque drawing 0.98 amps of current. Charts show speed, torque, efficiency at various loads from startup to maximum. The motor has a continuous duty cycle and efficiency of 49.2% for the motor and 29.0% for the overall system. It stalls at 1.90 amps and 38.26 lb-in of torque.
Groschopp 66024 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a 5:1 ratio gearbox. Key specifications include a voltage of 230v 60Hz, speed of 1540 rpm, and output of 0.0628 HP at 309.5 rpm. Charts show torque and efficiency at varying speeds when cold and hot. The motor has a continuous duty cycle and start/stall current of 1.08 amps. It is sold and serviced by Electromate.
Groschopp 47757 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a 45:1 ratio PS 1900 gearbox. Key specifications include a voltage of 115v, speed of 3060 rpm, output speed of 67.9 rpm, output torque of 23.3lb-in, current of 0.62 amps, and output power of 19 watts. Charts show speed, torque, efficiency at various torques from 0-90 lb-in. The motor has a continuous duty cycle and efficiencies of 49.4% for the motor, 53.2% for the gearbox, and 26.3% for the system. It is sold and serviced by Electromate.
Groschopp 47756 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, product ID, ratings for speed, torque, current and output. It also details breakdown, pullup, duty cycle, efficiency and start/stall conditions. Performance curves are shown for speed, torque and efficiency under cold and hot operating conditions. Notes indicate it uses a 16uF 250V capacitor and is sold and serviced by Electromate.
Groschopp 47753 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 10:1 ratio gearbox. The motor runs at 3060 rpm on 115V 60Hz power and outputs 305.7 rpm through the gearbox. Key specifications include an output of 26 watts at 0.0353 HP as well as start/stall current of 1.32 amps and torque of 6.42 lb-in. Charts show efficiency curves for torque, speed, and temperature. The motor and gearbox are sold and serviced by Electromate.
Groschopp 66392 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 230V 60Hz voltage and 1510rpm speed that is connected to an RP 7300 160:1 ratio gearbox. Key specifications include an output speed of 9.4rpm, torque of 233.4lb-in, current of 0.38amps, and efficiency rates for the gearbox, motor, and system. Performance charts also show torque and speed curves from 0 to 360rpm under cold and hot operating conditions.
Groschopp 05316 specsheet
This document provides specifications for an AC 1 Ph 8060 TENV motor with a voltage of 230V, speed of 3130 rpm, and no gearbox. Key specifications include a rating of 3126.6 rpm at 2.6lb-in of torque drawing 0.72 amps of current. Charts show torque and efficiency at varying speeds both when cold and hot, with maximum efficiency of 61.8%. Start/stall conditions draw 1.37 amps at 2.2 lb-in of torque.
Groschopp 10354 specsheet
This document provides specifications for a PM 6015 motor with a RA 3000T 15:1 ratio gearbox. Key specifications include a voltage of 130V DC, speed of 2500 rpm, output speed of 169.9 rpm, torque of 16.0lb-in, current of 0.66 amps, and efficiency of 39.4% for the overall system. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 66035 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a 246:1 ratio PL 7300 gearbox. Key specifications include a rated output of 6.3 rpm and 630 lb-in of torque drawing 0.4 amps of current. Breakdown and pullup tests were also performed showing speeds of 3.9 rpm and 0 rpm with torques of 1309.57 lb-in and 1177.36 lb-in respectively. Efficiency levels of the gearbox, motor and system are provided along with start/stall current and torque values and a chart showing efficiency at varying speeds and torques.
Groschopp 10325 specsheet
This document provides specifications for a motor and gearbox system including a PM 6015 24V DC motor with a RA 3000T 40:1 ratio gearbox. Key specifications listed include a no load speed of 59.5 rpm, torque of 34.4 lb-in, current of 3.3 amps, and power output of 24 watts or 0.0324 HP. Efficiencies are provided for the gearbox (42.3%), motor (76.1%), and overall system (32.2%). Start/stall current and torque are also specified along with torque-speed and efficiency curves. The system is sold and serviced by Electromate.
Groschopp 47759 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a 240:1 ratio PS 1900 gearbox. Key specifications include a voltage of 115v, speed of 3060 rpm, output of 13.0 rpm and 125.0lb-in of torque. Charts show torque and efficiency at varying speeds for cold and hot operation. The motor has a continuous duty cycle and system efficiency of 28.8%.
Groschopp 47764 specsheet
This document provides specifications for a 1 Ph 6540 TEFC AC motor with a 30:1 ratio PS 1900 gearbox. The motor operates at 115V 60Hz with a no-load speed of 2990 rpm. Key specifications include a no-load speed of 99.6 rpm, torque of 30.9 lb-in, current of 0.98 amps, and power output of 36 watts. Performance charts show speed, torque, efficiency at various loads from start up to maximum rated operation.
Groschopp 10327 specsheet
This document provides specifications for a PM 6015 motor with a 7.5:1 ratio RA 2600T gearbox. Key specifications include a voltage of 90V DC, speed of 2500 rpm, output speed of 331.6 rpm, torque of 4.7 lb-in, current of 0.89 amps, and power output of 18 watts. Charts show torque, speed, efficiency, and start/stall conditions over various loads on the motor and gearbox system.
Groschopp 66375 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 115V 60Hz voltage and 1510 rpm speed that is connected to an RP 7300 30:1 ratio gearbox. Key specifications include a no-load speed of 50.2 rpm, stall torque of 30.52 lb-in, continuous duty cycle, and system efficiency of 21.9%. Performance charts show torque and speed output at various conditions, along with efficiency.
What's hot (17)
Similar to Groschopp 66362 specsheet
Groschopp 66364 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 61:1 ratio gearbox. The motor has an output speed of 49.2 rpm, torque of 220.1 lb-in, and current of 2.64 amps, drawing 128 watts of power equivalent to 0.1718 HP. Startup current is 4.88 amps with 205.59 lb-in of torque. The gearbox and motor efficiencies are 76.3% and 56.8% respectively, resulting in a system efficiency of 43.4%. Performance charts provide speed, torque, efficiency and other data points under cold and hot
Groschopp 74533 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to an RA 3000T 25:1 ratio gearbox. Key specifications include a no-load speed of 60.9 rpm, stall torque of 167.72 lb-in, continuous duty cycle, and maximum efficiencies of 60.2% for the gearbox and 58.4% for the motor. Performance charts show torque, speed, and efficiency characteristics under cold and hot operating conditions. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 66366 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a RP 7300 120:1 ratio gearbox. The motor runs at 115v 60Hz with a speed of 3000 rpm and 2 poles. It has an output of 25.6 rpm, 356.5 lb-in of torque, and 0.1448 HP while drawing 2.49 amps of current and producing 108 watts of power. Charts show torque, speed, and efficiency at various points. It has a continuous duty cycle and efficiencies of 55.8% for the motor, 68.8% for the gearbox, and 38.4% for the overall system.
Groschopp 74502 specsheet
This document provides specifications for a 3 phase 8040 TEFC AC motor with a 230V 60Hz voltage and 1510 rpm speed connected to a RA 2600T 15:1 ratio gearbox. The motor has a rated output of 101.5 rpm, 57.5 lb-in of torque, and 0.67 amps of current. Breakdown and pullup tests were also performed, providing speed, torque, current and efficiency data across a range of torques and rpm. The motor, gearbox and system efficiencies are listed as well as start/stall current and torque conditions.
Groschopp 74534 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to an RA 4000T 15:1 ratio gearbox. The motor and gearbox combination has a rated output of 101.5 rpm and 50.5 lb-in of torque while drawing 0.67 amps of current. Charts show the system's torque, speed, and efficiency characteristics at various operational conditions including startup, continuous operation, and breakdown.
Groschopp 66049 specsheet
This document provides specifications for an AC 3 Phase 8060 TENV motor with a PL 7300 10:1 ratio gearbox. Key specifications include a voltage of 230v 60Hz, speed of 1560 rpm, output of 156 rpm and 42.8 lb-in of torque. Charts show torque and efficiency at varying speeds when cold and hot. The motor has a continuous duty cycle and system efficiency of 52%.
Groschopp 66367 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 160:1 ratio gearbox. Key specifications include an output speed of 19.6 rpm, torque of 424.8 lb-in, current of 2.36 amps, and efficiency between 54.1-67.7% depending on the motor, gearbox, or full system. Startup conditions include 4.88 amps of current and 487.84 lb-in of torque. Performance charts also show torque and speed output at varying RPMs along with efficiency levels when cold or hot.
Groschopp 47753 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 10:1 ratio gearbox. The motor runs at 3060 rpm single phase and draws 0.62 amps of current at its rated output of 305.7 rpm and 7.3 lb-in of torque. Startup conditions draw 1.32 amps at 6.42 lb-in of torque. The document also provides efficiency ratings for the gearbox, motor and overall system at various torque levels, as well as notes on a 16uF 250V capacitor.
Groschopp 74537 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 RPM speed connected to a RA 4000T 30:1 ratio gearbox. The motor and gearbox combination has an output speed of 50.7 RPM, torque of 82.1 lb-in, and efficiency of 26.9% under continuous duty operation. Startup conditions draw 1.77 amps of current and generate 172.91 lb-in of torque. Performance charts show speed, torque, efficiency, and temperature-dependent characteristics.
Groschopp 74512 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox details, ratings for speed, torque, current and output. It also lists breakdown, pullup, start/stall conditions and efficiency data across a range of torques and speeds. The motor is an AC 3 Phase 8040 TENV operating at 230V/60Hz with a 1540rpm and 4 pole configuration paired with a RA 2600T 30:1 ratio gearbox.
Groschopp 74536 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 RPM speed connected to an RA 4000T 25:1 ratio gearbox. The motor has a rated output of 60.9 RPM and 86.7 lb-in of torque while drawing 0.67 amps of current. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The motor has a continuous duty cycle and system efficiency of 34.1%.
Groschopp 66390 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 230V 60Hz voltage and 1510 rpm speed. It is paired with an RP 7300 90:1 ratio gearbox. Key specifications include a 16.8 rpm speed and 120.7 lb-in of torque at 0.38 amps of current and 24 watts of output. An efficiency chart is provided showing efficiency rates at different torque and speed levels.
Groschopp 66059 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a 230V 60Hz voltage and 1520rpm speed connected to a 5:1 ratio PL 7300 gearbox. Key specifications include a 306.5rpm speed and 37.4lb-in torque output at 0.92amps and 136watts. Breakdown torque is 82.07lb-in at 195.8rpm, and startup torque is 71.23lb-in at 4.1rpm. The motor has a continuous duty cycle with 54.3% system efficiency. Startup current is 2.56amps with 71.28lb-in torque. Speed and efficiency curves are provided against torque levels from 0-360lb-
Groschopp 66371 specsheet
This document provides specifications for a motor, gearbox, and system. The motor is an AC 1 Ph 8060 TEFC operating at 230v 60Hz with a speed of 3000 rpm. It is paired with a RP 7300 377:1 ratio gearbox. Key specifications include an output speed of 8.6 rpm, torque of 652 lb-in, and efficiency of 28.6%. Performance charts show torque and efficiency curves across a range of speeds from 0 to 1800 rpm. The system has a continuous duty cycle and start/stall conditions draw 2.36 amps with 943 lb-in of torque.
Groschopp 74531 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510rpm speed connected to a RA 2600T 10:1 ratio gearbox. The motor and gearbox combination can output 152.2rpm at 41.6lb-in of torque while drawing 0.67amps of current. Charts show the motor's torque, speed, and efficiency characteristics at various loads both when cold and hot.
Groschopp 47765 specsheet
This document provides specifications for a 1 Ph 6540 TEFC AC motor with a 45:1 ratio PS 1900 gearbox. Key specifications include a rated output of 66.4 rpm and 40.0 lb-in of torque drawing 0.98 amps of current. Breakdown torque is 68.14 lb-in at 53.3 rpm, and startup torque is 38.26 lb-in at 0 rpm. The motor has a continuous duty cycle with efficiencies of 49.2% for the motor and 29.0% for the overall system. Startup current is 1.90 amps with a stall torque of 38.26 lb-in. Performance curves show speed, torque and efficiency over operating conditions.
Groschopp 66381 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 184:1 ratio RP 7300 gearbox. Key specifications include a voltage of 115v, speed of 1510 rpm, output speed of 8.2 rpm, output torque of 219.8 lb-in, current of 0.76 amps, and output power of 21 watts. Charts show torque and efficiency at varying speeds both when cold and hot.
Groschopp 74523 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox details, ratings for speed, torque, current and output. It also lists start/stall conditions and efficiency data across a range of torques and speeds. The motor is an AC 3 Phase 8040 TENV operating at 230V 50Hz with a 1350 rpm speed and 20:1 ratio gearbox. Performance data is provided for normal operating conditions as well as cold and hot start conditions. The motor is sold and serviced by Electromate.
Groschopp 47764 specsheet
This document provides specifications for a 1 Ph 6540 TEFC AC motor with a 30:1 ratio PS 1900 gearbox. The motor operates at 115V 60Hz with a no-load speed of 2990 rpm. Key specifications include a no-load speed of 99.6 rpm, torque of 30.9 lb-in, current of 0.98 amps, and power output of 36 watts. Performance charts show speed, torque, efficiency at various loads from start up to maximum rated operation.
Groschopp 74503 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a 20:1 ratio RA 2600T gearbox. Key details include:
- The motor operates at 230V 60Hz and 1600rpm, with the gearbox providing an output speed of 84.6rpm.
- Under normal operating conditions, the system outputs 65W of power at 0.0872HP.
- Under maximum load conditions, the motor can output up to 311.17lb-in of torque while drawing 3.35amps of current.
- System efficiency is rated at 35.1% under normal operating conditions.
Similar to Groschopp 66362 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
Apps Break Data
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Public CyberSecurity Awareness Presentation 2024.pptx
Cyber security awareness slides for a busisness by TreeTop Security
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Recently uploaded (20)
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Public CyberSecurity Awareness Presentation 2024.pptx
Public CyberSecurity Awareness Presentation 2024.pptx
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Groschopp 66362 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: AC 1 Ph 8060 TEFC 115 v 60 Hz 3000 rpm 2 Poles RP 7300 30:1 Ratio Product ID: 66362 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 100.1 rpm 106.7lb-in 2.64 amps 126 watts 0.1694 HP Breakdown (Cold): Speed: Torque: 80.2 rpm 172.41 lb-in Pullup (Cold): Speed: Torque: 0.0 rpm 98.36lb-in Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 75.2 % 56.8 % 42.8 % Start/Stall Conditions: Current: Torque: 4.88 amps 98.36 lb-in Torque (lb-in) Speed RPM Efficiency 12.0 0.0 0.0 20.0 24.0 40.0 36.0 60.0 48.0 80.0 60.0 100.0 72.0 120.0 84.0 140.0 96.0 160.0 108.0 180.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Capacitor - 30uF 250V Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com