Groschopp 74510 specsheet
•
0 likes•50 views
This document provides specifications for a motor including its AC voltage, speed in RPM, gearbox ratio, product ID number, ratings for speed, torque, current and output. It also details startup conditions, duty cycle, efficiencies of the gearbox, motor and system, and graphs showing speed, torque and efficiency curves for cold and hot operation. The motor is sold and serviced by Electromate.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 66389 specsheet
This document provides specifications for an AC induction motor with a 61:1 gearbox including voltage, speed, torque, current, efficiency and start/stall conditions. Key specs listed are a 230V 60Hz motor running at 1510rpm, delivering 24.8rpm and 91.8lb-in of torque at 0.38amps and 27watts, with a maximum torque of 156.74lb-in. The gearbox, motor and system efficiencies are 64.2%, 48.6% and 31.2% respectively, and startup requires 0.68amps to produce 86.45lb-in of torque. Performance charts also show efficiency and torque curves versus speed.
Groschopp 74511 specsheet
The document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V/60Hz with a 1540 rpm speed and 20:1 ratio gearbox. It lists key metrics like output speed of 77.4 rpm, torque of 40.7 lb-in, current of 0.40 amps, and power output of 37 watts or 0.0500 horsepower. Charts show torque and efficiency at varying speeds for both cold and hot operating conditions. The motor is rated for continuous duty cycle and has start/stall current of 1.08 amps and torque of 82.93 lb-in.
Groschopp 74509 specsheet
This document provides specifications for a motor including its AC 3 Phase 8040 TENV voltage of 230v 60Hz, speed of 1540 rpm, and RA 2600T 10:1 ratio gearbox. It lists the motor's rating as 154.8 rpm and 20.7lb-in of torque drawing 0.40 amps of current and producing 38 watts or 0.0509 horsepower. Charts show torque and efficiency at varying speeds both when cold and hot. The motor has a continuous duty cycle and startup current of 1.08 amps producing 47.63 lb-in of torque. It is sold and serviced by Electromate.
Groschopp 74533 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to an RA 3000T 25:1 ratio gearbox. Key specifications include a no-load speed of 60.9 rpm, stall torque of 167.72 lb-in, continuous duty cycle, and maximum efficiencies of 60.2% for the gearbox and 58.4% for the motor. Performance charts show torque, speed, and efficiency characteristics under cold and hot operating conditions. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 66376 specsheet
This document provides specifications for a 1 Ph 8040 TENV AC motor with a 40:1 ratio gearbox. Key specifications include:
- Motor voltage of 115V, speed of 1510 rpm
- Gearbox output of 37.7 rpm, 60 lb-in of torque, drawing 0.76 amps of current
- Breakdown torque of 98.7 lb-in at 28.5 rpm, startup torque of 57.57 lb-in at 0 rpm
- Continuous duty cycle, gearbox efficiency of 63.7%, motor efficiency of 47.8%, system efficiency of 30.4%
- Startup current of 1.34 amps at 57.57 lb-in of torque
Groschopp 74546 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 4000T 40:1 ratio gearbox. The motor operates at 230V 50Hz and has a no-load speed of 1320 rpm. Key specifications include an output speed of 32.9 rpm, torque of 121.8 lb-in, and current of 0.75 amps at an efficiency of 26.4%. Startup conditions draw 1.77 amps and 329.59 lb-in of torque. Performance charts provide speed, torque, efficiency and other operating characteristics. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 66388 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 230V 60Hz voltage and 1510rpm speed connected to an RP 7300 40:1 ratio gearbox. The motor has a rated output of 37.8rpm, 59.7lb-in of torque, and 0.38amps of current. Performance charts show speed, torque, efficiency at various loads from startup to maximum. The motor has a continuous duty cycle and maximum efficiencies of 48.6% for the motor and 30.9% for the overall system.
Groschopp 74539 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed connected to a RA 2600T 10:1 ratio gearbox. The motor has a rating of 131.5rpm speed, 44.8lb-in torque, and 0.75amps current, and provides 70watts and 0.0935HP of output power. Charts show torque, speed, efficiency, and current characteristics at different operating conditions.
Recommended
Groschopp 66389 specsheet
This document provides specifications for an AC induction motor with a 61:1 gearbox including voltage, speed, torque, current, efficiency and start/stall conditions. Key specs listed are a 230V 60Hz motor running at 1510rpm, delivering 24.8rpm and 91.8lb-in of torque at 0.38amps and 27watts, with a maximum torque of 156.74lb-in. The gearbox, motor and system efficiencies are 64.2%, 48.6% and 31.2% respectively, and startup requires 0.68amps to produce 86.45lb-in of torque. Performance charts also show efficiency and torque curves versus speed.
Groschopp 74511 specsheet
The document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V/60Hz with a 1540 rpm speed and 20:1 ratio gearbox. It lists key metrics like output speed of 77.4 rpm, torque of 40.7 lb-in, current of 0.40 amps, and power output of 37 watts or 0.0500 horsepower. Charts show torque and efficiency at varying speeds for both cold and hot operating conditions. The motor is rated for continuous duty cycle and has start/stall current of 1.08 amps and torque of 82.93 lb-in.
Groschopp 74509 specsheet
This document provides specifications for a motor including its AC 3 Phase 8040 TENV voltage of 230v 60Hz, speed of 1540 rpm, and RA 2600T 10:1 ratio gearbox. It lists the motor's rating as 154.8 rpm and 20.7lb-in of torque drawing 0.40 amps of current and producing 38 watts or 0.0509 horsepower. Charts show torque and efficiency at varying speeds both when cold and hot. The motor has a continuous duty cycle and startup current of 1.08 amps producing 47.63 lb-in of torque. It is sold and serviced by Electromate.
Groschopp 74533 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to an RA 3000T 25:1 ratio gearbox. Key specifications include a no-load speed of 60.9 rpm, stall torque of 167.72 lb-in, continuous duty cycle, and maximum efficiencies of 60.2% for the gearbox and 58.4% for the motor. Performance charts show torque, speed, and efficiency characteristics under cold and hot operating conditions. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 66376 specsheet
This document provides specifications for a 1 Ph 8040 TENV AC motor with a 40:1 ratio gearbox. Key specifications include:
- Motor voltage of 115V, speed of 1510 rpm
- Gearbox output of 37.7 rpm, 60 lb-in of torque, drawing 0.76 amps of current
- Breakdown torque of 98.7 lb-in at 28.5 rpm, startup torque of 57.57 lb-in at 0 rpm
- Continuous duty cycle, gearbox efficiency of 63.7%, motor efficiency of 47.8%, system efficiency of 30.4%
- Startup current of 1.34 amps at 57.57 lb-in of torque
Groschopp 74546 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 4000T 40:1 ratio gearbox. The motor operates at 230V 50Hz and has a no-load speed of 1320 rpm. Key specifications include an output speed of 32.9 rpm, torque of 121.8 lb-in, and current of 0.75 amps at an efficiency of 26.4%. Startup conditions draw 1.77 amps and 329.59 lb-in of torque. Performance charts provide speed, torque, efficiency and other operating characteristics. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 66388 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 230V 60Hz voltage and 1510rpm speed connected to an RP 7300 40:1 ratio gearbox. The motor has a rated output of 37.8rpm, 59.7lb-in of torque, and 0.38amps of current. Performance charts show speed, torque, efficiency at various loads from startup to maximum. The motor has a continuous duty cycle and maximum efficiencies of 48.6% for the motor and 30.9% for the overall system.
Groschopp 74539 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed connected to a RA 2600T 10:1 ratio gearbox. The motor has a rating of 131.5rpm speed, 44.8lb-in torque, and 0.75amps current, and provides 70watts and 0.0935HP of output power. Charts show torque, speed, efficiency, and current characteristics at different operating conditions.
Groschopp 74516 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio and product ID. It details the motor's rating for speed, torque and current along with output power and duty cycle. Breakdown, pullup and start/stall test results are presented along with efficiency data across a range of torques and speeds. The motor is an AC 3-phase 8040 TENV unit powered at 230V 60Hz with a 1540 rpm speed and 40:1 gearbox ratio.
Groschopp 74531 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510rpm speed connected to a RA 2600T 10:1 ratio gearbox. The motor and gearbox combination can output 152.2rpm at 41.6lb-in of torque while drawing 0.67amps of current. Charts show the motor's torque, speed, and efficiency characteristics at various loads both when cold and hot.
Groschopp 74505 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a 230V 60Hz voltage and 1540rpm speed that is connected to an RA 2600T 40:1 ratio gearbox. The motor has a continuous duty cycle and produces 38.7rpm output speed at 86.7lb-in of torque while drawing 0.40amps of current and outputting 40watts of power equivalent to 0.0532HP. Under a cold start, the motor can produce 24.0rpm at 169.46lb-in of torque and when stalled produces 0.0rpm at 153.14lb-in of torque drawing 1.08amps. Charts show the motor's torque, speed, efficiency and
Groschopp 74544 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 40:1 ratio gearbox. The motor operates at 230V 50Hz and has a no-load speed of 1320 rpm. Key specifications include an output speed of 32.9 rpm, torque of 142.8 lb-in, and efficiency of 30.9% for the overall system. Performance charts show torque, speed, and efficiency over a range of loads from start up to full speed.
Groschopp 74517 specsheet
This document provides specifications for a motor including its AC 3 Phase 8040 TENV motor rated at 0.0296 HP, 1540 RPM, and 230V 60Hz. It details performance metrics like output speed of 31.0 RPM and torque of 60.3 lb-in at normal operating temperatures, and 19.2 RPM and 169.41 lb-in at cold temperatures. Charts show torque and efficiency at varying speeds. The motor has a continuous duty cycle and system efficiency of 19.4%.
Groschopp 66375 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 115V 60Hz voltage and 1510 rpm speed that is connected to an RP 7300 30:1 ratio gearbox. Key specifications include a no-load speed of 50.2 rpm, stall torque of 30.52 lb-in, continuous duty cycle, and system efficiency of 21.9%. Performance charts show torque and speed output at various conditions, along with efficiency.
Groschopp 66362 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 30:1 ratio RP 7300 gearbox. Key specifications include a voltage of 115v, speed of 3000 rpm, output speed of 100.1 rpm, output torque of 106.7 lb-in, and current of 2.64 amps. Start/stall conditions are listed as 4.88 amps and 98.36 lb-in of torque. Charts provide efficiency and torque vs speed data under cold and hot operating conditions. The motor, gearbox, and system efficiencies are 56.8%, 75.2%, and 42.8% respectively.
Groschopp 66377 specsheet
This document provides specifications for a 1 Ph 8040 TENV AC motor with a 61:1 ratio gearbox. Key specifications include a rated output of 24.7 rpm and 92.3 lb-in of torque at 0.76 amps and 27 watts. Breakdown torque is 157.43 lb-in at 18.7 rpm, and startup torque is 88.12 lb-in at 0 rpm. The gearbox, motor and system efficiencies are 64.3%, 47.8% and 30.7% respectively. The motor draws 1.34 amps and provides 88.12 lb-in of torque at startup. Speed and efficiency curves are provided for both cold and hot operation.
Groschopp 74536 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 RPM speed connected to an RA 4000T 25:1 ratio gearbox. The motor has a rated output of 60.9 RPM and 86.7 lb-in of torque while drawing 0.67 amps of current. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The motor has a continuous duty cycle and system efficiency of 34.1%.
Groschopp 74534 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to an RA 4000T 15:1 ratio gearbox. The motor and gearbox combination has a rated output of 101.5 rpm and 50.5 lb-in of torque while drawing 0.67 amps of current. Charts show the system's torque, speed, and efficiency characteristics at various operational conditions including startup, continuous operation, and breakdown.
Groschopp 74513 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a 230V 60Hz voltage and 1540rpm speed connected to an RA 2600T 50:1 ratio gearbox. The motor has a rating of 31.0rpm and 94.3lb-in of torque at 0.40amps and 35watts of output or 0.0463HP. Breakdown torque is 186.29lb-in at 19.2rpm and pullup torque is 165.53lb-in at 0rpm. The duty cycle is continuous and efficiency is 50.4% for the gearbox, 60.2% for the motor, and 30.3% for the system. Start/stall current is 1
Groschopp 74530 specsheet
This document provides specifications for a motor, gearbox, and system. The motor is an AC 3 Phase 8040 TENV operating at 230V 50Hz with a speed of 1350 rpm. It has a RA 3000T 80:1 ratio gearbox. The system has a rated speed of 16.9 rpm, torque of 103.0 lb-in, and current of 0.44 amps, producing 21 watts of power. Breakdown torque is 325.05 lb-in at 8.4 rpm, and pullup torque is 298.02 lb-in at 0.4 rpm. The system runs continuously with efficiencies of 37.9% for the gearbox, 51% for the motor, and
Groschopp 66392 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 230V 60Hz voltage and 1510rpm speed that is connected to an RP 7300 160:1 ratio gearbox. Key specifications include an output speed of 9.4rpm, torque of 233.4lb-in, current of 0.38amps, and efficiency rates for the gearbox, motor, and system. Performance charts also show torque and speed curves from 0 to 360rpm under cold and hot operating conditions.
Groschopp 47758 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a PS 1900 60:1 ratio gearbox. The motor operates at 115V 60Hz and has a no-load speed of 3060 rpm. Key specifications include an output speed of 51.0 rpm, torque of 30.9 lb-in, and current of 0.62 amps at an output power of 19 watts and 0.0250 HP. A breakdown test showed a speed of 40.3 rpm and torque of 51.47 lb-in, while a pullup test had 0 rpm speed and 27.30 lb-in torque. The motor has a continuous duty cycle and efficiency of 49.4% for the motor alone
Groschopp 74543 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 30:1 ratio gearbox. The motor runs at 1320 rpm and 230v 50Hz, and can output up to 43.8 rpm and 107.6 lb-in of torque at 0.75 amps of current. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The system has a maximum efficiency of 31.1% under continuous operation.
Groschopp 74523 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox details, ratings for speed, torque, current and output. It also lists start/stall conditions and efficiency data across a range of torques and speeds. The motor is an AC 3 Phase 8040 TENV operating at 230V 50Hz with a 1350 rpm speed and 20:1 ratio gearbox. Performance data is provided for normal operating conditions as well as cold and hot start conditions. The motor is sold and serviced by Electromate.
Groschopp 74522 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V 50Hz with a 1350 rpm speed and RA 2600T 15:1 ratio gearbox. The motor has a rated output of 89.9 rpm and 26.5 lb-in of torque while drawing 0.44 amps of current. Charts show torque and speed characteristics along with efficiency at varying torque levels.
Groschopp 74537 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 RPM speed connected to a RA 4000T 30:1 ratio gearbox. The motor and gearbox combination has an output speed of 50.7 RPM, torque of 82.1 lb-in, and efficiency of 26.9% under continuous duty operation. Startup conditions draw 1.77 amps of current and generate 172.91 lb-in of torque. Performance charts show speed, torque, efficiency, and temperature-dependent characteristics.
Groschopp 66387 specsheet
The document provides specifications for an AC 1 Ph 8040 TENV motor with a 230V 60Hz voltage and 1510 rpm speed. The motor has a RP 7300 30:1 ratio gearbox. Key specifications include a rated speed of 50.3 rpm and torque of 32.2 lb-in, drawing 0.38 amps of current. Breakdown torque is 69.27 lb-in at 38.4 rpm, and pullup torque is 29.79 lb-in at 0 rpm. The motor has a continuous duty cycle with gearbox, motor, and system efficiencies of 45.7%, 48.6%, and 22.2% respectively. Start/stall current is 0.68 amps with
Groschopp 74545 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed connected to an RA 4000T 30:1 ratio gearbox. The specifications include operating speeds and torques at various loads as well as efficiency curves and start/stall conditions. The motor and gearbox combination is rated for 43.8rpm and 88.5lb-in of torque drawing 0.75amps of current producing 46 watts of output power.
Groschopp 74512 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox details, ratings for speed, torque, current and output. It also lists breakdown, pullup, start/stall conditions and efficiency data across a range of torques and speeds. The motor is an AC 3 Phase 8040 TENV operating at 230V/60Hz with a 1540rpm and 4 pole configuration paired with a RA 2600T 30:1 ratio gearbox.
Groschopp 74540 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed that is connected to an RA 2600T 15:1 ratio gearbox. The motor has a rated speed of 87.7rpm, torque of 61.7lb-in, and current of 0.75amps at 64watts and 0.0859HP output. At breakdown, the speed is 45.0rpm with 155.09lb-in torque, and at pullup the speed is 0.0rpm with 142.76lb-in torque. The gearbox, motor, and system efficiencies are 65.7%, 54.3%, and 35.7% respectively.
More Related Content
What's hot
Groschopp 74516 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio and product ID. It details the motor's rating for speed, torque and current along with output power and duty cycle. Breakdown, pullup and start/stall test results are presented along with efficiency data across a range of torques and speeds. The motor is an AC 3-phase 8040 TENV unit powered at 230V 60Hz with a 1540 rpm speed and 40:1 gearbox ratio.
Groschopp 74531 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510rpm speed connected to a RA 2600T 10:1 ratio gearbox. The motor and gearbox combination can output 152.2rpm at 41.6lb-in of torque while drawing 0.67amps of current. Charts show the motor's torque, speed, and efficiency characteristics at various loads both when cold and hot.
Groschopp 74505 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a 230V 60Hz voltage and 1540rpm speed that is connected to an RA 2600T 40:1 ratio gearbox. The motor has a continuous duty cycle and produces 38.7rpm output speed at 86.7lb-in of torque while drawing 0.40amps of current and outputting 40watts of power equivalent to 0.0532HP. Under a cold start, the motor can produce 24.0rpm at 169.46lb-in of torque and when stalled produces 0.0rpm at 153.14lb-in of torque drawing 1.08amps. Charts show the motor's torque, speed, efficiency and
Groschopp 74544 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 40:1 ratio gearbox. The motor operates at 230V 50Hz and has a no-load speed of 1320 rpm. Key specifications include an output speed of 32.9 rpm, torque of 142.8 lb-in, and efficiency of 30.9% for the overall system. Performance charts show torque, speed, and efficiency over a range of loads from start up to full speed.
Groschopp 74517 specsheet
This document provides specifications for a motor including its AC 3 Phase 8040 TENV motor rated at 0.0296 HP, 1540 RPM, and 230V 60Hz. It details performance metrics like output speed of 31.0 RPM and torque of 60.3 lb-in at normal operating temperatures, and 19.2 RPM and 169.41 lb-in at cold temperatures. Charts show torque and efficiency at varying speeds. The motor has a continuous duty cycle and system efficiency of 19.4%.
Groschopp 66375 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 115V 60Hz voltage and 1510 rpm speed that is connected to an RP 7300 30:1 ratio gearbox. Key specifications include a no-load speed of 50.2 rpm, stall torque of 30.52 lb-in, continuous duty cycle, and system efficiency of 21.9%. Performance charts show torque and speed output at various conditions, along with efficiency.
Groschopp 66362 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 30:1 ratio RP 7300 gearbox. Key specifications include a voltage of 115v, speed of 3000 rpm, output speed of 100.1 rpm, output torque of 106.7 lb-in, and current of 2.64 amps. Start/stall conditions are listed as 4.88 amps and 98.36 lb-in of torque. Charts provide efficiency and torque vs speed data under cold and hot operating conditions. The motor, gearbox, and system efficiencies are 56.8%, 75.2%, and 42.8% respectively.
Groschopp 66377 specsheet
This document provides specifications for a 1 Ph 8040 TENV AC motor with a 61:1 ratio gearbox. Key specifications include a rated output of 24.7 rpm and 92.3 lb-in of torque at 0.76 amps and 27 watts. Breakdown torque is 157.43 lb-in at 18.7 rpm, and startup torque is 88.12 lb-in at 0 rpm. The gearbox, motor and system efficiencies are 64.3%, 47.8% and 30.7% respectively. The motor draws 1.34 amps and provides 88.12 lb-in of torque at startup. Speed and efficiency curves are provided for both cold and hot operation.
Groschopp 74536 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 RPM speed connected to an RA 4000T 25:1 ratio gearbox. The motor has a rated output of 60.9 RPM and 86.7 lb-in of torque while drawing 0.67 amps of current. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The motor has a continuous duty cycle and system efficiency of 34.1%.
Groschopp 74534 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to an RA 4000T 15:1 ratio gearbox. The motor and gearbox combination has a rated output of 101.5 rpm and 50.5 lb-in of torque while drawing 0.67 amps of current. Charts show the system's torque, speed, and efficiency characteristics at various operational conditions including startup, continuous operation, and breakdown.
Groschopp 74513 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a 230V 60Hz voltage and 1540rpm speed connected to an RA 2600T 50:1 ratio gearbox. The motor has a rating of 31.0rpm and 94.3lb-in of torque at 0.40amps and 35watts of output or 0.0463HP. Breakdown torque is 186.29lb-in at 19.2rpm and pullup torque is 165.53lb-in at 0rpm. The duty cycle is continuous and efficiency is 50.4% for the gearbox, 60.2% for the motor, and 30.3% for the system. Start/stall current is 1
Groschopp 74530 specsheet
This document provides specifications for a motor, gearbox, and system. The motor is an AC 3 Phase 8040 TENV operating at 230V 50Hz with a speed of 1350 rpm. It has a RA 3000T 80:1 ratio gearbox. The system has a rated speed of 16.9 rpm, torque of 103.0 lb-in, and current of 0.44 amps, producing 21 watts of power. Breakdown torque is 325.05 lb-in at 8.4 rpm, and pullup torque is 298.02 lb-in at 0.4 rpm. The system runs continuously with efficiencies of 37.9% for the gearbox, 51% for the motor, and
Groschopp 66392 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 230V 60Hz voltage and 1510rpm speed that is connected to an RP 7300 160:1 ratio gearbox. Key specifications include an output speed of 9.4rpm, torque of 233.4lb-in, current of 0.38amps, and efficiency rates for the gearbox, motor, and system. Performance charts also show torque and speed curves from 0 to 360rpm under cold and hot operating conditions.
Groschopp 47758 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a PS 1900 60:1 ratio gearbox. The motor operates at 115V 60Hz and has a no-load speed of 3060 rpm. Key specifications include an output speed of 51.0 rpm, torque of 30.9 lb-in, and current of 0.62 amps at an output power of 19 watts and 0.0250 HP. A breakdown test showed a speed of 40.3 rpm and torque of 51.47 lb-in, while a pullup test had 0 rpm speed and 27.30 lb-in torque. The motor has a continuous duty cycle and efficiency of 49.4% for the motor alone
Groschopp 74543 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 30:1 ratio gearbox. The motor runs at 1320 rpm and 230v 50Hz, and can output up to 43.8 rpm and 107.6 lb-in of torque at 0.75 amps of current. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The system has a maximum efficiency of 31.1% under continuous operation.
Groschopp 74523 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox details, ratings for speed, torque, current and output. It also lists start/stall conditions and efficiency data across a range of torques and speeds. The motor is an AC 3 Phase 8040 TENV operating at 230V 50Hz with a 1350 rpm speed and 20:1 ratio gearbox. Performance data is provided for normal operating conditions as well as cold and hot start conditions. The motor is sold and serviced by Electromate.
Groschopp 74522 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V 50Hz with a 1350 rpm speed and RA 2600T 15:1 ratio gearbox. The motor has a rated output of 89.9 rpm and 26.5 lb-in of torque while drawing 0.44 amps of current. Charts show torque and speed characteristics along with efficiency at varying torque levels.
Groschopp 74537 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 RPM speed connected to a RA 4000T 30:1 ratio gearbox. The motor and gearbox combination has an output speed of 50.7 RPM, torque of 82.1 lb-in, and efficiency of 26.9% under continuous duty operation. Startup conditions draw 1.77 amps of current and generate 172.91 lb-in of torque. Performance charts show speed, torque, efficiency, and temperature-dependent characteristics.
Groschopp 66387 specsheet
The document provides specifications for an AC 1 Ph 8040 TENV motor with a 230V 60Hz voltage and 1510 rpm speed. The motor has a RP 7300 30:1 ratio gearbox. Key specifications include a rated speed of 50.3 rpm and torque of 32.2 lb-in, drawing 0.38 amps of current. Breakdown torque is 69.27 lb-in at 38.4 rpm, and pullup torque is 29.79 lb-in at 0 rpm. The motor has a continuous duty cycle with gearbox, motor, and system efficiencies of 45.7%, 48.6%, and 22.2% respectively. Start/stall current is 0.68 amps with
Groschopp 74545 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed connected to an RA 4000T 30:1 ratio gearbox. The specifications include operating speeds and torques at various loads as well as efficiency curves and start/stall conditions. The motor and gearbox combination is rated for 43.8rpm and 88.5lb-in of torque drawing 0.75amps of current producing 46 watts of output power.
What's hot (20)
Similar to Groschopp 74510 specsheet
Groschopp 74512 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox details, ratings for speed, torque, current and output. It also lists breakdown, pullup, start/stall conditions and efficiency data across a range of torques and speeds. The motor is an AC 3 Phase 8040 TENV operating at 230V/60Hz with a 1540rpm and 4 pole configuration paired with a RA 2600T 30:1 ratio gearbox.
Groschopp 74540 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed that is connected to an RA 2600T 15:1 ratio gearbox. The motor has a rated speed of 87.7rpm, torque of 61.7lb-in, and current of 0.75amps at 64watts and 0.0859HP output. At breakdown, the speed is 45.0rpm with 155.09lb-in torque, and at pullup the speed is 0.0rpm with 142.76lb-in torque. The gearbox, motor, and system efficiencies are 65.7%, 54.3%, and 35.7% respectively.
Groschopp 74508 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a 230V 60Hz voltage and 1540rpm speed connected to an RA 2600T 7.5:1 ratio gearbox. Key specifications include a 206.4rpm speed and 16.4lb-in torque at 0.40amps and 40watts of output. Under a continuous duty cycle, the system has a 35.3% efficiency. Startup requires 1.08amps and generates 34lb-in of torque. Performance charts show speed and torque output over a range of loads. The motor and gearbox are sold and serviced by Electromate.
Groschopp 74532 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 20:1 ratio gearbox. Key details include:
- Motor voltage of 230V, 60Hz, 1510rpm, 4 poles
- Gearbox output of 76.1rpm at 78.6lb-in of torque drawing 0.67amps
- Breakdown torque of 160.4lb-in at 45.4rpm and pullup torque of 146.41lb-in at 4.5rpm
- Gearbox, motor and system efficiencies of 66.3%, 58.4% and 38.7% respectively
- Start/stall current of 1.77amps at 146.49lb
Groschopp 74502 specsheet
This document provides specifications for a 3 phase 8040 TEFC AC motor with a 230V 60Hz voltage and 1510 rpm speed connected to a RA 2600T 15:1 ratio gearbox. The motor has a rated output of 101.5 rpm, 57.5 lb-in of torque, and 0.67 amps of current. Breakdown and pullup tests were also performed, providing speed, torque, current and efficiency data across a range of torques and rpm. The motor, gearbox and system efficiencies are listed as well as start/stall current and torque conditions.
Groschopp 74538 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed connected to a RA 2600T 5:1 ratio gearbox. The motor has a rated output of 263rpm and 21.5lb-in of torque while drawing 0.75amps of current. Charts show the motor's torque, speed, and efficiency characteristics at various loads when cold and hot. The motor is intended for continuous duty and has a starting torque of 49.34lb-in while drawing 1.77amps.
Groschopp 74504 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510rpm speed connected to an RA 2600T 30:1 ratio gearbox. The motor has a rated output of 52rpm and 100lb-in of torque while drawing 0.63amps. Performance charts show torque and efficiency at varying speeds. The motor has continuous duty and startup current of 1.77amps.
Groschopp 74507 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V/60Hz with a top speed of 1540rpm through a 60:1 ratio gearbox. Key specifications include an output speed of 26.7rpm, torque of 88.8lb-in, and efficiency between 30-60% depending on load. Startup current is 1.08amps with 205.27lb-in of torque. Performance charts also show speed and torque output under various conditions.
Groschopp 74503 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a 20:1 ratio RA 2600T gearbox. Key details include:
- The motor operates at 230V 60Hz and 1600rpm, with the gearbox providing an output speed of 84.6rpm.
- Under normal operating conditions, the system outputs 65W of power at 0.0872HP.
- Under maximum load conditions, the motor can output up to 311.17lb-in of torque while drawing 3.35amps of current.
- System efficiency is rated at 35.1% under normal operating conditions.
Groschopp 74520 specsheet
This document provides specifications for a motor, gearbox, and system. The motor is an AC 3 Phase 8040 TENV operating at 230V 60Hz with a speed of 1540 rpm. It is paired with a RA 4000T 100:1 ratio gearbox. Key specifications include a rated speed of 15.5 rpm, torque of 103.7 lb-in, and current of 0.40 amps. Charts show torque and speed curves along with efficiency curves when cold and hot. The system has an overall efficiency of 16.7% with the motor at 60.2% and gearbox at 27.7%. It can operate continuously with a start/stall current of 1.08 amps and torque of
Groschopp 74515 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V/60Hz with a 1540 rpm speed and 60:1 ratio gearbox. The motor has a rating of 25.8 rpm speed and 106.9 lb-in of torque while drawing 0.40 amps of current and producing 33 watts of output power. Charts show torque and speed breakdown, pullup, efficiency versus torque, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 74514 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, product ID number, ratings for speed, torque, current and output. It also details breakdown, pullup, duty cycle, efficiency and start/stall conditions. Graphs show torque and speed curves as well as efficiency versus torque when cold and hot. The motor is sold and serviced by Electromate.
Groschopp 66025 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a PL 7300 10:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 154.8 rpm, torque of 27.9 lb-in, current of 0.40 amps, output of 51 watts, and efficiency between 60.2-74.5% depending on the motor, gearbox, or system. Performance charts show torque and speed values at various loads as well as efficiency curves for cold and hot operating conditions.
Groschopp 74518 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a 60:1 ratio RA 4000T gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1540 rpm, output speed of 25.8 rpm, torque of 60.7 lb-in, current of 0.40 amps, and efficiency of 16.3%. Performance charts show torque, speed, and efficiency at varying RPM. The motor and gearbox combination is rated for continuous duty and sold by Electromate.
Groschopp 66048 specsheet
This document provides specifications for an AC 3 Phase 8060 TENV motor with a 5:1 ratio PL 7300 gearbox. Key specifications include a rated speed of 312 RPM and torque of 20.2 lb-in, with an output of 74 watts and 0.0998 HP. Breakdown and pullup torque and speed values are also listed. The motor has a continuous duty cycle and system efficiency of 48.9%. Start/stall current and torque conditions are 1.63 amps and 43.66 lb-in. A graph shows torque, speed, and efficiency curves from cold to hot operation. The motor is sold and serviced by Electromate.
Groschopp 74524 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox details, ratings for speed, torque, current and output. It also lists breakdown, pullup, duty cycle, and start/stall condition details. Charts are included showing torque and speed relationships as well as efficiency curves for cold and hot operations. The motor is sold and serviced by Electromate.
Groschopp 74506 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510rpm speed connected to an RA 2600T 50:1 ratio gearbox. The motor and gearbox combination has an output speed of 32.5rpm, torque of 100lb-in, and power of 0.0516HP. Charts show efficiency and torque curves across a range of speeds. The system has a continuous duty cycle and efficiency of 29.2%.
Groschopp 74541 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 20:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1320 rpm, output speed of 65.7 rpm, output torque of 83.7 lb-in, and current of 0.75 amps. Charts show torque and efficiency curves across a range of speeds from 0 to 225 rpm when cold and hot. The motor has a continuous duty cycle and system efficiency of 36.3%.
Groschopp 66038 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a PL 7300 10:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1510 rpm, output of 152.2 rpm and 49.3lb-in of torque. Performance charts show speed, torque and efficiency at varying loads from start up to maximum output. The motor has a continuous duty cycle and system efficiency of 48.5%.
Similar to Groschopp 74510 specsheet (19)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Recently uploaded (20)
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Groschopp 74510 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: AC 3 Ph 8040 TENV 230 v 60 Hz 1540 rpm 4 Poles RA 2600T 15:1 Ratio Product ID: 74510 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 103.2 rpm 30.7lb-in 0.40 amps 38 watts 0.0503 HP Breakdown (Cold): Speed: Torque: 64.0 rpm 74.93 lb-in Pullup (Cold): Speed: Torque: 0.0 rpm 65.45lb-in Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 54.7 % 60.2 % 32.9 % Start/Stall Conditions: Current: Torque: 1.08 amps 65.45 lb-in Torque (lb-in) Speed RPM Efficiency 12.0 0.0 0.0 8.0 24.0 16.0 36.0 24.0 48.0 32.0 60.0 40.0 72.0 48.0 84.0 56.0 96.0 64.0 108.0 72.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com