Groschopp 47764 specsheet
•
0 likes•29 views
This document provides specifications for a 1 Ph 6540 TEFC AC motor with a 30:1 ratio PS 1900 gearbox. The motor operates at 115V 60Hz with a no-load speed of 2990 rpm. Key specifications include a no-load speed of 99.6 rpm, torque of 30.9 lb-in, current of 0.98 amps, and power output of 36 watts. Performance charts show speed, torque, efficiency at various loads from start up to maximum rated operation.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 47765 specsheet
This document provides specifications for a 1 Ph 6540 TEFC AC motor with a 45:1 ratio PS 1900 gearbox. Key specifications include a voltage of 115v, speed of 2990 rpm, output of 66.4 rpm at 40.0lb-in of torque drawing 0.98 amps of current. Charts show speed, torque, efficiency at various loads from startup to maximum. The motor has a continuous duty cycle and efficiency of 49.2% for the motor and 29.0% for the overall system. It stalls at 1.90 amps and 38.26 lb-in of torque.
Groschopp 66360 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 10:1 ratio gearbox. Key specifications include an output speed of 300.2 rpm, torque of 31.9 lb-in, current of 2.64 amps, and power output of 113 watts or 0.1521 HP. Charts show torque and speed characteristics along with efficiency curves for cold and hot operation.
Groschopp 47758 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a PS 1900 60:1 ratio gearbox. The motor operates at 115V 60Hz and has a no-load speed of 3060 rpm. Key specifications include an output speed of 51.0 rpm, torque of 30.9 lb-in, and current of 0.62 amps at an output power of 19 watts and 0.0250 HP. A breakdown test showed a speed of 40.3 rpm and torque of 51.47 lb-in, while a pullup test had 0 rpm speed and 27.30 lb-in torque. The motor has a continuous duty cycle and efficiency of 49.4% for the motor alone
Groschopp 66362 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 30:1 ratio RP 7300 gearbox. Key specifications include a voltage of 115v, speed of 3000 rpm, output speed of 100.1 rpm, output torque of 106.7 lb-in, and current of 2.64 amps. Start/stall conditions are listed as 4.88 amps and 98.36 lb-in of torque. Charts provide efficiency and torque vs speed data under cold and hot operating conditions. The motor, gearbox, and system efficiencies are 56.8%, 75.2%, and 42.8% respectively.
Groschopp 66387 specsheet
The document provides specifications for an AC 1 Ph 8040 TENV motor with a 230V 60Hz voltage and 1510 rpm speed. The motor has a RP 7300 30:1 ratio gearbox. Key specifications include a rated speed of 50.3 rpm and torque of 32.2 lb-in, drawing 0.38 amps of current. Breakdown torque is 69.27 lb-in at 38.4 rpm, and pullup torque is 29.79 lb-in at 0 rpm. The motor has a continuous duty cycle with gearbox, motor, and system efficiencies of 45.7%, 48.6%, and 22.2% respectively. Start/stall current is 0.68 amps with
Groschopp 47760 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a 320:1 ratio gearbox. Key specifications include a voltage of 115v, speed of 3060 rpm, output of 9.6 rpm and 125 lb-in of torque. Charts show torque and efficiency at varying speeds under cold and hot operating conditions. The motor has a continuous duty cycle and efficiency of 49.3% for the motor alone and 20.1% for the overall system. It requires a 16uF 250V capacitor.
Groschopp 47757 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a 45:1 ratio PS 1900 gearbox. Key specifications include a voltage of 115v, speed of 3060 rpm, output speed of 67.9 rpm, output torque of 23.3lb-in, current of 0.62 amps, and output power of 19 watts. Charts show speed, torque, efficiency at various torques from 0-90 lb-in. The motor has a continuous duty cycle and efficiencies of 49.4% for the motor, 53.2% for the gearbox, and 26.3% for the system. It is sold and serviced by Electromate.
Groschopp 66038 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a PL 7300 10:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1510 rpm, output of 152.2 rpm and 49.3lb-in of torque. Performance charts show speed, torque and efficiency at varying loads from start up to maximum output. The motor has a continuous duty cycle and system efficiency of 48.5%.
Recommended
Groschopp 47765 specsheet
This document provides specifications for a 1 Ph 6540 TEFC AC motor with a 45:1 ratio PS 1900 gearbox. Key specifications include a voltage of 115v, speed of 2990 rpm, output of 66.4 rpm at 40.0lb-in of torque drawing 0.98 amps of current. Charts show speed, torque, efficiency at various loads from startup to maximum. The motor has a continuous duty cycle and efficiency of 49.2% for the motor and 29.0% for the overall system. It stalls at 1.90 amps and 38.26 lb-in of torque.
Groschopp 66360 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 10:1 ratio gearbox. Key specifications include an output speed of 300.2 rpm, torque of 31.9 lb-in, current of 2.64 amps, and power output of 113 watts or 0.1521 HP. Charts show torque and speed characteristics along with efficiency curves for cold and hot operation.
Groschopp 47758 specsheet
The document provides specifications for an AC 1 Ph 6540 TENV motor with a PS 1900 60:1 ratio gearbox. The motor operates at 115V 60Hz and has a no-load speed of 3060 rpm. Key specifications include an output speed of 51.0 rpm, torque of 30.9 lb-in, and current of 0.62 amps at an output power of 19 watts and 0.0250 HP. A breakdown test showed a speed of 40.3 rpm and torque of 51.47 lb-in, while a pullup test had 0 rpm speed and 27.30 lb-in torque. The motor has a continuous duty cycle and efficiency of 49.4% for the motor alone
Groschopp 66362 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 30:1 ratio RP 7300 gearbox. Key specifications include a voltage of 115v, speed of 3000 rpm, output speed of 100.1 rpm, output torque of 106.7 lb-in, and current of 2.64 amps. Start/stall conditions are listed as 4.88 amps and 98.36 lb-in of torque. Charts provide efficiency and torque vs speed data under cold and hot operating conditions. The motor, gearbox, and system efficiencies are 56.8%, 75.2%, and 42.8% respectively.
Groschopp 66387 specsheet
The document provides specifications for an AC 1 Ph 8040 TENV motor with a 230V 60Hz voltage and 1510 rpm speed. The motor has a RP 7300 30:1 ratio gearbox. Key specifications include a rated speed of 50.3 rpm and torque of 32.2 lb-in, drawing 0.38 amps of current. Breakdown torque is 69.27 lb-in at 38.4 rpm, and pullup torque is 29.79 lb-in at 0 rpm. The motor has a continuous duty cycle with gearbox, motor, and system efficiencies of 45.7%, 48.6%, and 22.2% respectively. Start/stall current is 0.68 amps with
Groschopp 47760 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a 320:1 ratio gearbox. Key specifications include a voltage of 115v, speed of 3060 rpm, output of 9.6 rpm and 125 lb-in of torque. Charts show torque and efficiency at varying speeds under cold and hot operating conditions. The motor has a continuous duty cycle and efficiency of 49.3% for the motor alone and 20.1% for the overall system. It requires a 16uF 250V capacitor.
Groschopp 47757 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a 45:1 ratio PS 1900 gearbox. Key specifications include a voltage of 115v, speed of 3060 rpm, output speed of 67.9 rpm, output torque of 23.3lb-in, current of 0.62 amps, and output power of 19 watts. Charts show speed, torque, efficiency at various torques from 0-90 lb-in. The motor has a continuous duty cycle and efficiencies of 49.4% for the motor, 53.2% for the gearbox, and 26.3% for the system. It is sold and serviced by Electromate.
Groschopp 66038 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a PL 7300 10:1 ratio gearbox. Key specifications include a voltage of 230V 60Hz, speed of 1510 rpm, output of 152.2 rpm and 49.3lb-in of torque. Performance charts show speed, torque and efficiency at varying loads from start up to maximum output. The motor has a continuous duty cycle and system efficiency of 48.5%.
Groschopp 05120 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 115V, speed of 1480 rpm, and no gearbox. Key specifications include a rated speed of 1483 rpm, torque of 1.1 lb-in, current of 0.64 amps, output of 20 watts, and efficiency of 30.6%. Performance data is provided showing torque and speed curves for cold and hot operation.
Groschopp 05306 specsheet
This document provides specifications for an AC 1 Ph 8040 TEFC motor with a voltage of 115V, speed of 2910 rpm, and no gearbox. Key specifications include a rated speed of 2907.9 rpm, torque of 3.1 lb-in, current of 1.88 amps, output power of 107 watts, and efficiency of 50.9%. Startup conditions include a current of 3.18 amps and torque of 3.04 lb-in. A graph shows efficiency and speed curves versus torque.
Groschopp 05310 specsheet
This document provides specifications for an AC 1 Ph 8040 TEFC motor with a voltage of 230V, speed of 2920 rpm, and no gearbox. Key specifications include a rated speed of 2915.1 rpm, output of 104 watts, and efficiency of 49.2%. Performance charts show torque and speed characteristics including breakdown, pullup, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 05124 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor that operates at 115v and 60Hz with a speed of 2990 rpm. The motor has an output of 53 watts, 0.0717 HP, and a torque of 1.5lb-in at its rated speed of 2988.9 rpm. Charts show its torque and efficiency characteristics at different speeds when cold and hot.
Groschopp 05308 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 230V, speed of 3090 rpm, and no gearbox. Key specifications include a rating of 3089.2 rpm and 1.8 lb-in of torque at 0.52 amps and 66 watts of output. The motor has a breakdown speed of 2564.76 rpm and pullup speed of 0 rpm. It has a continuous duty cycle with system efficiencies of 57.4%. Start/stall conditions are 1.06 amps and 1.56 lb-in of torque. Additional details are provided on torque and speed curves as well as notes on a 2.5uF 440V capacitor.
Groschopp 47759 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a 240:1 ratio PS 1900 gearbox. Key specifications include a voltage of 115v, speed of 3060 rpm, output of 13.0 rpm and 125.0lb-in of torque. Charts show torque and efficiency at varying speeds for cold and hot operation. The motor has a continuous duty cycle and system efficiency of 28.8%.
Groschopp 10354 specsheet
This document provides specifications for a PM 6015 motor with a RA 3000T 15:1 ratio gearbox. Key specifications include a voltage of 130V DC, speed of 2500 rpm, output speed of 169.9 rpm, torque of 16.0lb-in, current of 0.66 amps, and efficiency of 39.4% for the overall system. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 66365 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to a RP 7300 90:1 ratio gearbox. The motor has an output of 33.4 rpm and 304.9 lb-in of torque at 2.64 amps and 120 watts or 0.1614 HP. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The motor has a continuous duty cycle with peak startup current of 4.88 amps and 284.11 lb-in of torque.
Groschopp 66024 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a 5:1 ratio gearbox. Key specifications include a voltage of 230v 60Hz, speed of 1540 rpm, and output of 0.0628 HP at 309.5 rpm. Charts show torque and efficiency at varying speeds when cold and hot. The motor has a continuous duty cycle and start/stall current of 1.08 amps. It is sold and serviced by Electromate.
Groschopp 47756 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, product ID, ratings for speed, torque, current and output. It also details breakdown, pullup, duty cycle, efficiency and start/stall conditions. Performance curves are shown for speed, torque and efficiency under cold and hot operating conditions. Notes indicate it uses a 16uF 250V capacitor and is sold and serviced by Electromate.
Groschopp 47738 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 320:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1450 rpm, output of 0.0098 HP, maximum torque of 901.3 lb-in, and continuous duty cycle. Performance charts show speed, torque, current and efficiency at varying loads from start up to maximum output.
Ready remedies
Hi All!
This Ppt Is An Idea From Me To Make An App That Will Be Helpful For Taking Good Care Of Our Hair And Skin!
Hope You Find It Interesting!
Adaptación curriculares de aula y recursos para la
Este documento describe las adaptaciones curriculares necesarias para la escolarización de niños sordos. Requiere un proyecto educativo flexible, profesores capacitados, recursos especializados como intérpretes de lenguaje de signos, y adaptaciones en el contenido, actividades y evaluaciones. La escolarización temprana en un centro de integración es importante para el desarrollo del niño sordo.
Drucker chapter 5
The document discusses Peter Drucker's ideas about management and how Alcoa implemented them. It provides discussion questions about Drucker's view that management is about making people capable of joint performance and leveraging their strengths. It also summarizes how Alcoa focused on employee safety, respect, and contribution to achieve financial success, lowering their lost workday rate and increasing productivity and quality.
IPM 70 YEAR CELEBRATION in the HR Industry
This document summarizes a presentation given by Rre Elijah Litheko, CEO of IPM, to discuss emerging trends in the HR field. Litheko discusses how the world is changing with increased connectivity, technology advances, and less ability to predict the future. HR professionals must innovate to stay competitive and collaborate to remain ahead of changes. Litheko promotes the benefits of professional recognition and membership with IPM, including credentials, career support, learning opportunities, and contributing to the profession through mentoring.
Saans ki dhaar by qaiser shamim www.aiourdubooks.net
Saans ki dhaar by qaiser shamim www.aiourdubooks.net
Presentación ordenador
Este documento proporciona una breve historia del desarrollo de la computadora, comenzando con los primeros intentos de Charles Babbage de crear una máquina de cálculo mecánica en el siglo XIX. Luego describe algunas de las primeras computadoras electrónicas como ENIAC y UNIVAC y el desarrollo de los transistores. También cubre el surgimiento de las primeras computadoras personales creadas por Steve Jobs y Steve Wozniak y el desarrollo de Internet a partir de ARPANET. Finalmente, predice que las comput
AXELOS
This certificate confirms that Manasa Tadipathri achieved an ITIL Foundation Certificate in IT Service Management from EXIN, an independent certification institute for ICT professionals. The certificate is valid from September 6, 2014 and includes a registration number.
Redes en la docencia ventajas y desventajas
El documento describe las ventajas y desventajas del uso de redes sociales en la docencia. Entre las ventajas se encuentran que rompe paradigmas en la docencia, proporciona documentos e información de forma instantánea, promueve el aprendizaje en sociedad y permite roles más activos entre estudiantes y profesores. Las desventajas incluyen que puede promover el distanciamiento social, existen riesgos de falsificar datos personales y hackear información, y no siempre hay privacidad en las redes.
Preguntas de investigacion
Este documento presenta 40 preguntas de investigación sobre temas relacionados con la educación, el desarrollo de los estudiantes, la tecnología, el medio ambiente y la comunidad. Cada pregunta incluye una calificación sobre factibilidad, tiempo, costo, grado de innovación tecnológica y solución técnica para un puntaje total. Las preguntas cubren temas como mejorar la convivencia estudiantil, aceptar los cambios durante la adolescencia, desarrollarse mental y sexualmente, y cuidar el medio ambiente.
teoria de conjuntos
Este documento presenta un proyecto de aula sobre la teoría de conjuntos. Explica conceptos básicos como conjuntos, subconjuntos, conjuntos vacíos, operaciones entre conjuntos como unión e intersección, y diagramas de Venn. Los objetivos son conocer el concepto de aplicación entre conjuntos y entender los conjuntos como el modelo matemático más sencillo. El proyecto concluye que la teoría de conjuntos es una herramienta importante para estudiar relaciones y sentó las bases para simplificar definiciones complejas.
Project03 (Final Project)_Briefing.pdf
This document outlines the requirements and instructions for an individual final project on designing a residential landscape. Students must choose the same site from a previous analysis project. They will prepare presentation boards showing the design process from conceptual to master plans, as well as plant palettes, cost estimates, and maintenance plans. All drawings must be completed by hand and presented on boards by November 24th. The project aims to develop students' design process and small-scale landscape design skills. It is worth 40% of the total grade.
More Related Content
What's hot
Groschopp 05120 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 115V, speed of 1480 rpm, and no gearbox. Key specifications include a rated speed of 1483 rpm, torque of 1.1 lb-in, current of 0.64 amps, output of 20 watts, and efficiency of 30.6%. Performance data is provided showing torque and speed curves for cold and hot operation.
Groschopp 05306 specsheet
This document provides specifications for an AC 1 Ph 8040 TEFC motor with a voltage of 115V, speed of 2910 rpm, and no gearbox. Key specifications include a rated speed of 2907.9 rpm, torque of 3.1 lb-in, current of 1.88 amps, output power of 107 watts, and efficiency of 50.9%. Startup conditions include a current of 3.18 amps and torque of 3.04 lb-in. A graph shows efficiency and speed curves versus torque.
Groschopp 05310 specsheet
This document provides specifications for an AC 1 Ph 8040 TEFC motor with a voltage of 230V, speed of 2920 rpm, and no gearbox. Key specifications include a rated speed of 2915.1 rpm, output of 104 watts, and efficiency of 49.2%. Performance charts show torque and speed characteristics including breakdown, pullup, and start/stall conditions. The motor is sold and serviced by Electromate.
Groschopp 05124 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor that operates at 115v and 60Hz with a speed of 2990 rpm. The motor has an output of 53 watts, 0.0717 HP, and a torque of 1.5lb-in at its rated speed of 2988.9 rpm. Charts show its torque and efficiency characteristics at different speeds when cold and hot.
Groschopp 05308 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 230V, speed of 3090 rpm, and no gearbox. Key specifications include a rating of 3089.2 rpm and 1.8 lb-in of torque at 0.52 amps and 66 watts of output. The motor has a breakdown speed of 2564.76 rpm and pullup speed of 0 rpm. It has a continuous duty cycle with system efficiencies of 57.4%. Start/stall conditions are 1.06 amps and 1.56 lb-in of torque. Additional details are provided on torque and speed curves as well as notes on a 2.5uF 440V capacitor.
Groschopp 47759 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a 240:1 ratio PS 1900 gearbox. Key specifications include a voltage of 115v, speed of 3060 rpm, output of 13.0 rpm and 125.0lb-in of torque. Charts show torque and efficiency at varying speeds for cold and hot operation. The motor has a continuous duty cycle and system efficiency of 28.8%.
Groschopp 10354 specsheet
This document provides specifications for a PM 6015 motor with a RA 3000T 15:1 ratio gearbox. Key specifications include a voltage of 130V DC, speed of 2500 rpm, output speed of 169.9 rpm, torque of 16.0lb-in, current of 0.66 amps, and efficiency of 39.4% for the overall system. Performance curves are provided showing torque, speed, efficiency at varying loads. The motor and gearbox combination is sold and serviced by Electromate.
Groschopp 66365 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to a RP 7300 90:1 ratio gearbox. The motor has an output of 33.4 rpm and 304.9 lb-in of torque at 2.64 amps and 120 watts or 0.1614 HP. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The motor has a continuous duty cycle with peak startup current of 4.88 amps and 284.11 lb-in of torque.
Groschopp 66024 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a 5:1 ratio gearbox. Key specifications include a voltage of 230v 60Hz, speed of 1540 rpm, and output of 0.0628 HP at 309.5 rpm. Charts show torque and efficiency at varying speeds when cold and hot. The motor has a continuous duty cycle and start/stall current of 1.08 amps. It is sold and serviced by Electromate.
Groschopp 47756 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, product ID, ratings for speed, torque, current and output. It also details breakdown, pullup, duty cycle, efficiency and start/stall conditions. Performance curves are shown for speed, torque and efficiency under cold and hot operating conditions. Notes indicate it uses a 16uF 250V capacitor and is sold and serviced by Electromate.
Groschopp 47738 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 320:1 ratio gearbox. Key specifications include a voltage of 230V, speed of 1450 rpm, output of 0.0098 HP, maximum torque of 901.3 lb-in, and continuous duty cycle. Performance charts show speed, torque, current and efficiency at varying loads from start up to maximum output.
What's hot (11)
Viewers also liked
Ready remedies
Hi All!
This Ppt Is An Idea From Me To Make An App That Will Be Helpful For Taking Good Care Of Our Hair And Skin!
Hope You Find It Interesting!
Adaptación curriculares de aula y recursos para la
Este documento describe las adaptaciones curriculares necesarias para la escolarización de niños sordos. Requiere un proyecto educativo flexible, profesores capacitados, recursos especializados como intérpretes de lenguaje de signos, y adaptaciones en el contenido, actividades y evaluaciones. La escolarización temprana en un centro de integración es importante para el desarrollo del niño sordo.
Drucker chapter 5
The document discusses Peter Drucker's ideas about management and how Alcoa implemented them. It provides discussion questions about Drucker's view that management is about making people capable of joint performance and leveraging their strengths. It also summarizes how Alcoa focused on employee safety, respect, and contribution to achieve financial success, lowering their lost workday rate and increasing productivity and quality.
IPM 70 YEAR CELEBRATION in the HR Industry
This document summarizes a presentation given by Rre Elijah Litheko, CEO of IPM, to discuss emerging trends in the HR field. Litheko discusses how the world is changing with increased connectivity, technology advances, and less ability to predict the future. HR professionals must innovate to stay competitive and collaborate to remain ahead of changes. Litheko promotes the benefits of professional recognition and membership with IPM, including credentials, career support, learning opportunities, and contributing to the profession through mentoring.
Saans ki dhaar by qaiser shamim www.aiourdubooks.net
Saans ki dhaar by qaiser shamim www.aiourdubooks.net
Presentación ordenador
Este documento proporciona una breve historia del desarrollo de la computadora, comenzando con los primeros intentos de Charles Babbage de crear una máquina de cálculo mecánica en el siglo XIX. Luego describe algunas de las primeras computadoras electrónicas como ENIAC y UNIVAC y el desarrollo de los transistores. También cubre el surgimiento de las primeras computadoras personales creadas por Steve Jobs y Steve Wozniak y el desarrollo de Internet a partir de ARPANET. Finalmente, predice que las comput
AXELOS
This certificate confirms that Manasa Tadipathri achieved an ITIL Foundation Certificate in IT Service Management from EXIN, an independent certification institute for ICT professionals. The certificate is valid from September 6, 2014 and includes a registration number.
Redes en la docencia ventajas y desventajas
El documento describe las ventajas y desventajas del uso de redes sociales en la docencia. Entre las ventajas se encuentran que rompe paradigmas en la docencia, proporciona documentos e información de forma instantánea, promueve el aprendizaje en sociedad y permite roles más activos entre estudiantes y profesores. Las desventajas incluyen que puede promover el distanciamiento social, existen riesgos de falsificar datos personales y hackear información, y no siempre hay privacidad en las redes.
Preguntas de investigacion
Este documento presenta 40 preguntas de investigación sobre temas relacionados con la educación, el desarrollo de los estudiantes, la tecnología, el medio ambiente y la comunidad. Cada pregunta incluye una calificación sobre factibilidad, tiempo, costo, grado de innovación tecnológica y solución técnica para un puntaje total. Las preguntas cubren temas como mejorar la convivencia estudiantil, aceptar los cambios durante la adolescencia, desarrollarse mental y sexualmente, y cuidar el medio ambiente.
teoria de conjuntos
Este documento presenta un proyecto de aula sobre la teoría de conjuntos. Explica conceptos básicos como conjuntos, subconjuntos, conjuntos vacíos, operaciones entre conjuntos como unión e intersección, y diagramas de Venn. Los objetivos son conocer el concepto de aplicación entre conjuntos y entender los conjuntos como el modelo matemático más sencillo. El proyecto concluye que la teoría de conjuntos es una herramienta importante para estudiar relaciones y sentó las bases para simplificar definiciones complejas.
Project03 (Final Project)_Briefing.pdf
This document outlines the requirements and instructions for an individual final project on designing a residential landscape. Students must choose the same site from a previous analysis project. They will prepare presentation boards showing the design process from conceptual to master plans, as well as plant palettes, cost estimates, and maintenance plans. All drawings must be completed by hand and presented on boards by November 24th. The project aims to develop students' design process and small-scale landscape design skills. It is worth 40% of the total grade.
English II (2).pdf
The document summarizes information about two famous laksa shops in Malaysia: Penang Road Famous Laksa and Bangsar Lucky Garden Sarawak Laksa. It provides details about the location, operation hours, owners, and specialties of each laksa. Both laksas are similar but the Sarawak laksa is noted as having enhanced taste from the prawns. Challenges faced by Penang Laksa include being crowded with not enough seating, while recommendations are made to expand the shop and improve customer experience.
BBL flexitank
Flexitank BBL is a flexible packaging made of polyethylene, that is used for storing and transporting a wide variety of liquid food, industrial products and liquid non-hazardous chemicals; each flexitank can be placed in a dry container 20' or any transport with the same characteristics; to be transported by sea, rail or road.
Planificarea Strategica a Guvernului
Exemple și formate ilustrative privind sistemul de Planificare Strategică a Guvernului (2016). Planșe utilizate (parțial) în emisiunea Money News TV cu același subiect: https://youtu.be/L20LyVnr-fA
Chapter 2
The document discusses factors that influence physical activity and nutrition habits and barriers to making healthy choices. It addresses environmental factors like modern conveniences, job requirements, and community priorities that promote sedentary lifestyles. Traffic-calming strategies and value marketing are defined. Common reasons for unhealthy choices include procrastination and cultural beliefs. Locus of control and its relation to health is explained, along with three impediments - problems of competence, confidence, and motivation - that can prevent people from making changes. SMART goals are defined as specific, measurable, acceptable, realistic and time-specific.
Unit 3 part ii Data mining
To cover the basics of data mining functions,applications of data mining,basics of data pre processing,Applications of data warehouse
Organización y funcionamiento de los Tribunales Laborales
Este documento resume el sistema jurisdiccional laboral en Venezuela. Explica que el Sistema Juris 2000 es una plataforma digital utilizada por el Poder Judicial para mejorar la eficiencia de los tribunales. Luego describe la estructura de los tribunales laborales en Venezuela, incluyendo los tribunales de primera y segunda instancia, así como el Tribunal Supremo de Justicia. Finalmente, aborda conceptos como el arbitraje laboral, la recusación de jueces y los medios de prueba permitidos en los procesos laborales.
As férias do menino nicolau
Este documento descreve as férias do Menino Nicolau e sua família. Eles se preparam para ir de férias, mas esquecem a mala em casa duas vezes. Na estação, há muita confusão e é difícil estacionar. Seu pai pergunta a um senhor como chegar ao cais correto.
Talent Chamber presentation
Talent Chamber presentation delivered by Neil de Villiers
Managing Director for Blue Square Deals Ltd at The South East London Chamber of Commerce AGM.
How the film poster was made
The document describes the process of editing a film poster in Photoshop. First, the background was blurred to make the characters stand out. Then, brightness and contrast were adjusted to enhance colors as bright colors appeal to the target audience. Text was added to the poster, including the title, website, credits, release date, tagline, and production logos. Conventions from other posters, such as placement of text elements, were followed to design an effective promotional poster.
Viewers also liked (20)
Adaptación curriculares de aula y recursos para la
Adaptación curriculares de aula y recursos para la
Saans ki dhaar by qaiser shamim www.aiourdubooks.net
Saans ki dhaar by qaiser shamim www.aiourdubooks.net
Organización y funcionamiento de los Tribunales Laborales
Organización y funcionamiento de los Tribunales Laborales
Similar to Groschopp 47764 specsheet
Groschopp 47763 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a PS 1900 25:1 ratio gearbox. Key specifications include a voltage of 115V 60Hz, a no-load speed of 2990 rpm, a full-load speed of 119.6 rpm, and a full-load torque of 22.2 lb-in. Charts show torque and efficiency curves across a range of speeds. The motor has a continuous duty cycle and system efficiency of 28.9% under full-load conditions.
Groschopp 47765 specsheet
This document provides specifications for a 1 Ph 6540 TEFC AC motor with a 45:1 ratio PS 1900 gearbox. Key specifications include a rated output of 66.4 rpm and 40.0 lb-in of torque drawing 0.98 amps of current. Breakdown torque is 68.14 lb-in at 53.3 rpm, and startup torque is 38.26 lb-in at 0 rpm. The motor has a continuous duty cycle with efficiencies of 49.2% for the motor and 29.0% for the overall system. Startup current is 1.90 amps with a stall torque of 38.26 lb-in. Performance curves show speed, torque and efficiency over operating conditions.
Groschopp 47762 specsheet
This document provides specifications for an AC 1 Phase 6540 TEFC motor with a PS 1900 15:1 ratio gearbox. The motor operates at 115V 60Hz with a no-load speed of 2990 rpm. Key specifications include an output speed of 199.3 rpm, torque of 17.8 lb-in, and current of 0.98 amps. Performance charts show speed, torque, efficiency at various loads from start up to full load. The gearbox, motor and system efficiencies are 78.7%, 49.2% and 38.7% respectively.
Groschopp 47754 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 15:1 ratio gearbox. The motor runs at 3060 rpm on 115V 60Hz power and is rated for 203.8 rpm output speed, 10.9 lb-in torque, and 0.62 amps current. System efficiency is 36.9% under continuous duty operation. Startup current is 1.32 amps with 9.63 lb-in stall torque. A graph shows efficiency decreases with increasing torque from a maximum of 90% at low torque.
Groschopp 47754 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 15:1 ratio gearbox. The motor runs at 3060 rpm single phase and 115v. Key specifications include an output speed of 203.8 rpm, torque of 10.9 lb-in, current of 0.62 amps, and power output of 26 watts or 0.0352 HP. Startup current is 1.32 amps with 9.63 lb-in of torque. Efficiency levels are provided for the gearbox, motor, and overall system at various torque and speed levels, with peak efficiencies of 74.6%, 49.4%, and 36.9%, respectively.
Groschopp 47761 specsheet
This document provides specifications for an AC motor with a 5:1 ratio gearbox. It lists details such as the motor voltage, speed, gearbox ratio, and product ID. It then gives performance data for the motor such as rated speed, torque, current draw, output power, and duty cycle. Charts show torque and efficiency at varying speeds both when cold and hot. The motor is sold and serviced by Electromate.
Groschopp 47756 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, product ID, ratings for speed, torque, current and output. It also details breakdown, pullup, duty cycle, efficiency and start/stall conditions. Performance curves are shown for speed, torque and efficiency under cold and hot operating conditions. Notes indicate it uses a 16uF 250V capacitor and is sold and serviced by Electromate.
Groschopp 47753 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 10:1 ratio gearbox. The motor runs at 3060 rpm on 115V 60Hz power and outputs 305.7 rpm through the gearbox. Key specifications include an output of 26 watts at 0.0353 HP as well as start/stall current of 1.32 amps and torque of 6.42 lb-in. Charts show efficiency curves for torque, speed, and temperature. The motor and gearbox are sold and serviced by Electromate.
Groschopp 47753 specsheet
This document provides specifications for a 1 Ph 6540 TENV AC motor with a PS 1900 10:1 ratio gearbox. The motor runs at 3060 rpm single phase and draws 0.62 amps of current at its rated output of 305.7 rpm and 7.3 lb-in of torque. Startup conditions draw 1.32 amps at 6.42 lb-in of torque. The document also provides efficiency ratings for the gearbox, motor and overall system at various torque levels, as well as notes on a 16uF 250V capacitor.
Groschopp 05124 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor that operates at 115v 60Hz with a maximum speed of 2990 rpm. The motor has an output of 53 watts, 0.0717 HP, and torque of 1.5lb-in at its rated speed of 2988.9 rpm. Charts show torque and efficiency curves for the motor under cold and hot operating conditions.
Groschopp 66389 specsheet
This document provides specifications for an AC induction motor with a 61:1 gearbox including voltage, speed, torque, current, efficiency and start/stall conditions. Key specs listed are a 230V 60Hz motor running at 1510rpm, delivering 24.8rpm and 91.8lb-in of torque at 0.38amps and 27watts, with a maximum torque of 156.74lb-in. The gearbox, motor and system efficiencies are 64.2%, 48.6% and 31.2% respectively, and startup requires 0.68amps to produce 86.45lb-in of torque. Performance charts also show efficiency and torque curves versus speed.
Groschopp 66364 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 61:1 ratio gearbox. The motor has an output speed of 49.2 rpm, torque of 220.1 lb-in, and current of 2.64 amps, drawing 128 watts of power equivalent to 0.1718 HP. Startup current is 4.88 amps with 205.59 lb-in of torque. The gearbox and motor efficiencies are 76.3% and 56.8% respectively, resulting in a system efficiency of 43.4%. Performance charts provide speed, torque, efficiency and other data points under cold and hot
Groschopp 66388 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 230V 60Hz voltage and 1510rpm speed connected to an RP 7300 40:1 ratio gearbox. The motor has a rated output of 37.8rpm, 59.7lb-in of torque, and 0.38amps of current. Performance charts show speed, torque, efficiency at various loads from startup to maximum. The motor has a continuous duty cycle and maximum efficiencies of 48.6% for the motor and 30.9% for the overall system.
Groschopp 47775 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a PS 1900 20:1 ratio gearbox. Key details include:
- Motor operates at 115V 60Hz and produces 74.1 rpm and 16.1 lb-in of torque drawing 0.64 amps of current.
- Gearbox has a 20:1 ratio, so motor output is increased to 1480 rpm.
- Charts show torque and speed characteristics along with efficiency at varying loads both when cold and hot.
Groschopp 47726 specsheet
This document provides specifications for an AC 3 Phase 6540 TEFC motor with a 5:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1450 rpm, with the geared output running at 290.8 rpm.
- At full load, the motor outputs 21 watts of power at 0.0281 horsepower.
- Charts show torque and efficiency at varying speeds both when cold and hot.
- The motor has a continuous duty cycle and maximum current of 0.49 amps during start or stall conditions.
Groschopp 05318 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a voltage of 230V, speed of 3000 rpm, and no gearbox. Key specifications include a rated speed of 3000.6 rpm, torque of 4.5lb-in, current of 1.30 amps, output of 161 watts, and efficiency of 57.1%. A graph shows efficiency and speed versus torque from 0 to 3600 rpm.
Groschopp 05318 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a voltage of 230V, speed of 3000 rpm, and no gearbox. Key specifications include a rated speed of 3000.6 rpm, torque of 4.5lb-in, current of 1.30 amps, output of 161 watts, and efficiency of 57.1%. A graph shows efficiency and speed versus torque from 0 to 3600 rpm.
Groschopp 66361 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 20:1 ratio RP 7300 gearbox. The motor operates at 115V 60Hz with a speed of 3000rpm. It has an output of 165.4rpm, 24.5lb-in of torque, and 48 watts of power at 0.0644HP. Charts show speed, torque, efficiency at various loads from cold start up to hot running conditions. The motor and gearbox are sold and serviced by Electromate.
Groschopp 47782 specsheet
This document provides specifications for a 1 phase AC motor with a 15:1 ratio gearbox. The motor runs at 1490 rpm and 230V 60Hz. Key specifications include an operating speed of 99.5 rpm, torque of 11.8 lb-in, current of 0.33 amps, and output of 14 watts and 0.0187 HP. Breakdown and pullup torque and speed are also listed. The motor has continuous duty cycle and system efficiency of 21.5%. Start/stall current and torque are provided. A graph shows torque, speed, and efficiency at varying RPMs for both cold and hot operation. The motor is sold and serviced by Electromate.
Groschopp 47755 specsheet
This document provides specifications for an AC 1 Ph 6540 TENV motor with a PS 1900 20:1 ratio gearbox. Key details include a voltage of 115V, speed of 3060 rpm, output of 152.9 rpm and 13.2lb-in of torque. Performance charts show speed, torque and efficiency at varying loads from start up to maximum output. The motor has a continuous duty cycle and efficiency of 49.4% for the motor alone and 33.5% for the overall system. It is rated for 152.9 rpm output with a 0.62 amp current and 24 watts of power.
Similar to Groschopp 47764 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Northern Engraving | Nameplate Manufacturing Process - 2024
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
The Microsoft 365 Migration Tutorial For Beginner.pptx
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Dmitrii Kamaev, PhD
Senior Product Owner - QIAGEN
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Astute Business Solutions | Oracle Cloud Partner |
Your goto partner for Oracle Cloud, PeopleSoft, E-Business Suite, and Ellucian Banner. We are a firm specialized in managed services and consulting.
Artificial Intelligence and Electronic Warfare
Artificial Intelligence and Electronic WarfarePapadakis K.-Cyber-Information Warfare Analyst & Cyber Defense/Security Consultant-Hellenic MoD
AI & Electronic Warfare"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
Recently uploaded (20)
Northern Engraving | Nameplate Manufacturing Process - 2024
Northern Engraving | Nameplate Manufacturing Process - 2024
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
The Microsoft 365 Migration Tutorial For Beginner.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
Groschopp 47764 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: AC 1 Ph 6540 TEFC 115 v 60 Hz 2990 rpm 2 Poles PS 1900 30:1 Ratio Product ID: 47764 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 99.6 rpm 30.9lb-in 0.98 amps 36 watts 0.0488 HP Breakdown (Cold): Speed: Torque: 79.9 rpm 49.18 lb-in Pullup (Cold): Speed: Torque: 0.0 rpm 29.67lb-in Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 68.2 % 49.2 % 33.5 % Start/Stall Conditions: Current: Torque: 1.90 amps 29.67 lb-in Torque (lb-in) Speed RPM Efficiency 12.0 0.0 0.0 5.0 24.0 10.0 36.0 15.0 48.0 20.0 60.0 25.0 72.0 30.0 84.0 35.0 96.0 40.0 108.0 45.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Capacitor - 25uF 250V Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com