Groschopp 62453 specsheet
•
0 likes•47 views
This document provides specifications for a small electric motor system including a PM 8014 motor rated at 13.3 rpm, 253.7 lb-in of torque, and 40 watts of output power. The system includes a 184:1 ratio gearbox. Key specifications listed are the motor voltage, speed, current, efficiency ratings, start/stall conditions, and torque-speed curves. The motor, gearbox, and overall system efficiencies are 53.0%, 63.6%, and 33.7% respectively.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 62452 specsheet
This document provides specifications for a PM 8014 motor with a 115V voltage and 2500 rpm speed that is paired with a RP 7300 gearbox with a 160:1 ratio. Key specifications include a rated speed of 15.3 rpm, torque of 262.1 lb-in, current of 1.17 amps, and power output of 48 watts. The motor has an efficiency of 63.6%, the gearbox 63%, and the overall system 40%. Start/stall conditions are listed as 7.18 amps current and 2838.62 lb-in torque. A graph shows torque and efficiency at varying speeds.
Groschopp 62342 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 377:1 ratio gearbox. The motor runs on 115V, produces 3.7 rpm and 749.8 lb-in of torque at 0.91 amps and 33 watts of power. The gearbox and motor have efficiencies of 65.6% and 59.5% respectively, yielding a system efficiency of 39.1%. Startup requires 4 amps and produces 5316.82 lb-in of torque. Performance curves show torque and speed vs efficiency from 0-5400 rpm. The motor is sold and serviced by Electromate.
Groschopp 62442 specsheet
This document provides specifications for a PM 8014 motor with a 377:1 gearbox including voltage, speed, torque, current, output power, duty cycle, efficiency, start/stall conditions, and torque/speed curves. Key specifications are a 115V motor running at 1400 rpm delivering 0.0392 HP at 3.8 rpm with system efficiency of 35.9% and gearbox and motor efficiencies of 60% and 59.9% respectively.
Groschopp 62439 specsheet
This document provides specifications for a PM 8014 motor with a RP 7300 160:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM, and the gearbox provides an output speed of 8.8 RPM. The motor has a rating of 0.0437 HP, draws 0.91 amps of current, and can produce up to 314.7 lb-in of torque. Charts show the motor's torque and efficiency at different speeds.
Groschopp 62339 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 160:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM, and can output up to 8.8 RPM and 331.8 lb-in of torque. System efficiency is rated at 40.8%. Start/stall conditions are 4 amps of current and 2543.31 lb-in of torque. A graph shows torque and efficiency at varying speeds from 0 to 2700 RPM. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 62338 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 120:1 ratio gearbox. Key specifications include a voltage of 115v, speed of 1400 rpm, output of 11.7 rpm, 239.4 lb-in of torque, and efficiencies of 65.9% for the gearbox and 39.2% for the system overall. Performance curves are provided showing torque, speed, and efficiency over a range of RPMs.
Groschopp 62449 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, output ratings, efficiency ratings, start/stall conditions, and torque/speed curve. The motor runs on 115v, spins at 2500 rpm, has a 61:1 gearbox ratio, and can output up to 40.2 rpm, 106 lb-in of torque, and 50 watts of power at 42.5% system efficiency. It draws up to 7.18 amps and produces 1197.57 lb-in of torque under start/stall conditions. A graph shows its torque and efficiency at varying speeds. It was prepared by Groschopp.com and can be purchased from Electromate.
Groschopp 62440 specsheet
This document provides specifications for a PM 8014 motor with a 184:1 ratio gearbox. The motor runs on 115V, has a top speed of 1400 RPM, and can output up to 7.6 RPM and 317.1 lb-in of torque. Performance statistics are provided, including current, power, efficiency, and torque curves. The motor is sold and serviced by Electromate.
Recommended
Groschopp 62452 specsheet
This document provides specifications for a PM 8014 motor with a 115V voltage and 2500 rpm speed that is paired with a RP 7300 gearbox with a 160:1 ratio. Key specifications include a rated speed of 15.3 rpm, torque of 262.1 lb-in, current of 1.17 amps, and power output of 48 watts. The motor has an efficiency of 63.6%, the gearbox 63%, and the overall system 40%. Start/stall conditions are listed as 7.18 amps current and 2838.62 lb-in torque. A graph shows torque and efficiency at varying speeds.
Groschopp 62342 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 377:1 ratio gearbox. The motor runs on 115V, produces 3.7 rpm and 749.8 lb-in of torque at 0.91 amps and 33 watts of power. The gearbox and motor have efficiencies of 65.6% and 59.5% respectively, yielding a system efficiency of 39.1%. Startup requires 4 amps and produces 5316.82 lb-in of torque. Performance curves show torque and speed vs efficiency from 0-5400 rpm. The motor is sold and serviced by Electromate.
Groschopp 62442 specsheet
This document provides specifications for a PM 8014 motor with a 377:1 gearbox including voltage, speed, torque, current, output power, duty cycle, efficiency, start/stall conditions, and torque/speed curves. Key specifications are a 115V motor running at 1400 rpm delivering 0.0392 HP at 3.8 rpm with system efficiency of 35.9% and gearbox and motor efficiencies of 60% and 59.9% respectively.
Groschopp 62439 specsheet
This document provides specifications for a PM 8014 motor with a RP 7300 160:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM, and the gearbox provides an output speed of 8.8 RPM. The motor has a rating of 0.0437 HP, draws 0.91 amps of current, and can produce up to 314.7 lb-in of torque. Charts show the motor's torque and efficiency at different speeds.
Groschopp 62339 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 160:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM, and can output up to 8.8 RPM and 331.8 lb-in of torque. System efficiency is rated at 40.8%. Start/stall conditions are 4 amps of current and 2543.31 lb-in of torque. A graph shows torque and efficiency at varying speeds from 0 to 2700 RPM. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 62338 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 120:1 ratio gearbox. Key specifications include a voltage of 115v, speed of 1400 rpm, output of 11.7 rpm, 239.4 lb-in of torque, and efficiencies of 65.9% for the gearbox and 39.2% for the system overall. Performance curves are provided showing torque, speed, and efficiency over a range of RPMs.
Groschopp 62449 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, output ratings, efficiency ratings, start/stall conditions, and torque/speed curve. The motor runs on 115v, spins at 2500 rpm, has a 61:1 gearbox ratio, and can output up to 40.2 rpm, 106 lb-in of torque, and 50 watts of power at 42.5% system efficiency. It draws up to 7.18 amps and produces 1197.57 lb-in of torque under start/stall conditions. A graph shows its torque and efficiency at varying speeds. It was prepared by Groschopp.com and can be purchased from Electromate.
Groschopp 62440 specsheet
This document provides specifications for a PM 8014 motor with a 184:1 ratio gearbox. The motor runs on 115V, has a top speed of 1400 RPM, and can output up to 7.6 RPM and 317.1 lb-in of torque. Performance statistics are provided, including current, power, efficiency, and torque curves. The motor is sold and serviced by Electromate.
Groschopp 62436 specsheet
This document provides specifications for a PM 8014 motor with a 61:1 gearbox. The motor runs on 115V, has a top speed of 23 RPM, and maximum torque of 130 lb-in. It has a startup current of 4 amps and can continuously operate with 0.91 amps of current. The gearbox and motor each have efficiencies around 70% and 60% respectively, resulting in an overall system efficiency of 42%. Performance curves are provided showing torque, speed, and efficiency at varying loads.
Groschopp 62451 specsheet
This document provides specifications for a small electric motor including its voltage, speed, gearbox ratio, torque, current, output power, duty cycle, efficiency rates, start/stall conditions, and speed versus torque and efficiency performance curves. Key details are the motor runs at 115v and 2500 rpm, has a 120:1 gearbox ratio, produces 20.4 rpm and 181.5 lb-in of torque at 1.17 amps and 44 watts of power output.
Groschopp 62450 specsheet
This document provides specifications for a PM 8014 motor with a 115V voltage and 2500 RPM speed that is paired with a RP 7300 90:1 ratio gearbox. Key specifications include a rated speed of 27.2 RPM, torque of 140.8 lb-in, current of 1.17 amps, output power of 45 watts, and efficiency ratings of 60.2% for the gearbox, 63.6% for the motor, and 38.2% for the overall system. Start/stall conditions are listed as 7.18 amps current and 1671.53 lb-in torque. A graph shows torque and efficiency at varying speeds.
Groschopp 62437 specsheet
This document provides specifications for a PM 8014 motor with a 90:1 gearbox including its voltage, speed, torque, current, output power, duty cycle, efficiency, start/stall conditions, and torque/speed curve. The motor runs at 1400 rpm on 115v with an output of 0.0431HP. The gearbox has a 64% efficiency while the motor has 59.5% and the overall system efficiency is 38.1%.
Groschopp 62340 specsheet
This document provides specifications for a PM 8014 motor with a 184:1 gearbox including its voltage, speed, torque, current, output, duty cycle, efficiency, start/stall conditions, and torque and efficiency curves versus speed. The motor runs at 1400 rpm on 115v with an output of 7.6 rpm, 0.0404 HP, and 334.7 lb-in of torque. The gearbox, motor, and system efficiencies are 60.1%, 59.5%, and 35.8% respectively.
Groschopp 62422 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage powered at 2450 RPM. It has a 160:1 ratio RP 7300 gearbox. The motor has a rating of 15.3 RPM and 103.6 lb-in of torque drawing 0.63 amps of current and producing 19 watts of output power equivalent to 0.0251 HP. It has a continuous duty cycle with system efficiency of 29.7%, gearbox efficiency of 49.3%, and motor efficiency of 60.2%. It draws 2.79 amps of current and produces 1079.02 lb-in of torque under start/stall conditions.
Groschopp 62323 specsheet
This document provides specifications for a small electric motor system including a PM 6015 motor that operates at 115v and 2450 rpm, paired with a PL 7300 gearbox with a 184:1 ratio. Key specifications listed are a top speed of 13.3 rpm, torque of 80.3 lb-in, current of 0.63 amps, and power output of 13 watts or 0.0169 HP. The system has a maximum efficiency of 20% with the individual efficiencies of the gearbox being 33.2%, motor being 60.2%. Startup current and torque are also provided along with torque and speed curves and contact information for the distributor.
Groschopp 62438 specsheet
This document provides specifications for a small electric motor system including a PM 8014 motor rated at 11.7 rpm, 226.5 lb-in of torque, and 0.0419 HP powered by 115V. The system includes a RP 7300 120:1 ratio gearbox with an overall efficiency of 37.1%. Performance curves are provided showing torque, speed, and efficiency over a range of loads.
Groschopp 62337 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 90:1 ratio gearbox. Key specifications include a voltage of 115v, speed of 1400 rpm, output of 15.6 rpm and 184.9 lb-in of torque. Performance metrics are given like efficiency of the gearbox (67.8%), motor (59.5%) and system (40.4%). A graph shows torque and efficiency over a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 62324 specsheet
This document provides specifications for a PM 6015 motor with a PL 7300 246:1 ratio gearbox. Key specifications include a voltage of 115V, speed of 2450 RPM, output of 9.9 RPM and 136.3 lb-in of torque. Performance metrics are provided like current draw of 0.63 amps, efficiency of the motor at 60.2%, gearbox at 42.2% and overall system at 25.4%. A graph shows torque and efficiency at varying speeds. The motor can be purchased from Electromate.
Groschopp 62322 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 2450 RPM speed, and 160:1 ratio PL 7300 gearbox. Key specifications include a 15.3 RPM no load speed, 112.8 lb-in of torque, 0.63A of current, and 32.3% system efficiency. Start/stall conditions are listed as 2.79A of current and 1174.24 lb-in of torque. Performance curves are provided showing torque, speed, and efficiency at varying torque levels from 0 to 18 lb-in.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, and 1.42 amps of current. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start/stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 01009 specsheet
This document provides specifications for a PM 6015 130V DC motor with a rating of 1535 RPM, 2.2 lb-in of torque, and 0.46 amps of current. The motor has no gearbox, runs continuously, and has an efficiency of 67.3%. It can produce up to 8.19 lb-in of torque at startup with 1.59 amps of current. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 62336 specsheet
This document provides specifications for a PM 8014 motor with a 61:1 gearbox. Key specifications include a voltage of 115V, speed of 1400 RPM, output of 23 RPM, 139.6 lb-in of torque, and efficiencies of 75.5% for the gearbox, 59.5% for the motor, and 45% for the overall system. Performance curves are provided showing torque, speed, and efficiency over a range of torque values from 0 to 36 lb-in.
Groschopp 62423 specsheet
This document provides specifications for a small electric motor system including a PM 6015 motor rated at 13.3 rpm, 72.1 lb-in of torque, and 0.0152 HP powered by 115V. The system includes a 184:1 ratio gearbox. Performance curves show torque and efficiency at varying speeds, with maximum efficiency of 60.2% for the gearbox and 18% for the overall system. Start/stall conditions draw 2.79A and produce 1180.49 lb-in of torque.
Groschopp 62339 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 160:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM, and can output up to 8.8 RPM and 331.8 lb-in of torque. System efficiency is rated at 40.8%. Start/stall conditions are 4 amps of current and 2543.31 lb-in of torque. A graph shows torque and efficiency at varying speeds between 0-2700 RPM. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 62412 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 377:1 ratio gearbox. Key specifications include a 3.5 rpm rated speed, 298.5 lb-in torque, and system efficiency of 27.0%. Performance curves show torque and efficiency at varying speeds from 0 to 1400 rpm.
Groschopp 62424 specsheet
This document provides specifications for a PM 6015 motor with a 246:1 gearbox. It operates at 115v and 2450 rpm, producing 9.9 rpm and 126.7 lb-in of torque at 0.63 amps of current. The gearbox efficiency is 39.2%, the motor efficiency is 60.2%, and the overall system efficiency is 23.6%. Startup requires 2.79 amps and produces 1548.79 lb-in of torque. Performance curves are provided for torque, speed, and efficiency at varying rpm. It is sold and serviced by Electromate.
Groschopp 62410 specsheet
This document provides specifications for a PM 6015 motor with a 184:1 ratio gearbox. The motor runs at 1300 rpm on 115v power, with an output speed of 7.2 rpm and torque of 115 lb-in. It has a continuous duty cycle and system efficiency of 21.3%. Charts show torque and efficiency levels across speeds from 0 to 900 rpm. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 62341 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 246:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM and produces 5.7 RPM of output. It has a rated torque of 487.1 lb-in, current of 0.91 amps, and efficiency between the motor and gearbox of 38.9%. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 62312 specsheet
This document provides specifications for a PM 6015 motor with a PL 7300 377:1 ratio gearbox. The motor runs on 115V, has a speed of 1300 RPM, and outputs 3.5 RPM and 314.8 lb-in of torque at 0.47 amps and 13 watts or 0.0175 HP. The gearbox has an efficiency of 52.4% and the motor 54.3% for a total system efficiency of 28.4%. Start conditions require 1.54 amps and 2022.72 lb-in of torque. A graph shows efficiency between 10-90% as torque varies from 0-4.5 lb-in and speed from 0-2250 RPM.
More Related Content
What's hot
Groschopp 62436 specsheet
This document provides specifications for a PM 8014 motor with a 61:1 gearbox. The motor runs on 115V, has a top speed of 23 RPM, and maximum torque of 130 lb-in. It has a startup current of 4 amps and can continuously operate with 0.91 amps of current. The gearbox and motor each have efficiencies around 70% and 60% respectively, resulting in an overall system efficiency of 42%. Performance curves are provided showing torque, speed, and efficiency at varying loads.
Groschopp 62451 specsheet
This document provides specifications for a small electric motor including its voltage, speed, gearbox ratio, torque, current, output power, duty cycle, efficiency rates, start/stall conditions, and speed versus torque and efficiency performance curves. Key details are the motor runs at 115v and 2500 rpm, has a 120:1 gearbox ratio, produces 20.4 rpm and 181.5 lb-in of torque at 1.17 amps and 44 watts of power output.
Groschopp 62450 specsheet
This document provides specifications for a PM 8014 motor with a 115V voltage and 2500 RPM speed that is paired with a RP 7300 90:1 ratio gearbox. Key specifications include a rated speed of 27.2 RPM, torque of 140.8 lb-in, current of 1.17 amps, output power of 45 watts, and efficiency ratings of 60.2% for the gearbox, 63.6% for the motor, and 38.2% for the overall system. Start/stall conditions are listed as 7.18 amps current and 1671.53 lb-in torque. A graph shows torque and efficiency at varying speeds.
Groschopp 62437 specsheet
This document provides specifications for a PM 8014 motor with a 90:1 gearbox including its voltage, speed, torque, current, output power, duty cycle, efficiency, start/stall conditions, and torque/speed curve. The motor runs at 1400 rpm on 115v with an output of 0.0431HP. The gearbox has a 64% efficiency while the motor has 59.5% and the overall system efficiency is 38.1%.
Groschopp 62340 specsheet
This document provides specifications for a PM 8014 motor with a 184:1 gearbox including its voltage, speed, torque, current, output, duty cycle, efficiency, start/stall conditions, and torque and efficiency curves versus speed. The motor runs at 1400 rpm on 115v with an output of 7.6 rpm, 0.0404 HP, and 334.7 lb-in of torque. The gearbox, motor, and system efficiencies are 60.1%, 59.5%, and 35.8% respectively.
Groschopp 62422 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage powered at 2450 RPM. It has a 160:1 ratio RP 7300 gearbox. The motor has a rating of 15.3 RPM and 103.6 lb-in of torque drawing 0.63 amps of current and producing 19 watts of output power equivalent to 0.0251 HP. It has a continuous duty cycle with system efficiency of 29.7%, gearbox efficiency of 49.3%, and motor efficiency of 60.2%. It draws 2.79 amps of current and produces 1079.02 lb-in of torque under start/stall conditions.
Groschopp 62323 specsheet
This document provides specifications for a small electric motor system including a PM 6015 motor that operates at 115v and 2450 rpm, paired with a PL 7300 gearbox with a 184:1 ratio. Key specifications listed are a top speed of 13.3 rpm, torque of 80.3 lb-in, current of 0.63 amps, and power output of 13 watts or 0.0169 HP. The system has a maximum efficiency of 20% with the individual efficiencies of the gearbox being 33.2%, motor being 60.2%. Startup current and torque are also provided along with torque and speed curves and contact information for the distributor.
Groschopp 62438 specsheet
This document provides specifications for a small electric motor system including a PM 8014 motor rated at 11.7 rpm, 226.5 lb-in of torque, and 0.0419 HP powered by 115V. The system includes a RP 7300 120:1 ratio gearbox with an overall efficiency of 37.1%. Performance curves are provided showing torque, speed, and efficiency over a range of loads.
Groschopp 62337 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 90:1 ratio gearbox. Key specifications include a voltage of 115v, speed of 1400 rpm, output of 15.6 rpm and 184.9 lb-in of torque. Performance metrics are given like efficiency of the gearbox (67.8%), motor (59.5%) and system (40.4%). A graph shows torque and efficiency over a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 62324 specsheet
This document provides specifications for a PM 6015 motor with a PL 7300 246:1 ratio gearbox. Key specifications include a voltage of 115V, speed of 2450 RPM, output of 9.9 RPM and 136.3 lb-in of torque. Performance metrics are provided like current draw of 0.63 amps, efficiency of the motor at 60.2%, gearbox at 42.2% and overall system at 25.4%. A graph shows torque and efficiency at varying speeds. The motor can be purchased from Electromate.
Groschopp 62322 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 2450 RPM speed, and 160:1 ratio PL 7300 gearbox. Key specifications include a 15.3 RPM no load speed, 112.8 lb-in of torque, 0.63A of current, and 32.3% system efficiency. Start/stall conditions are listed as 2.79A of current and 1174.24 lb-in of torque. Performance curves are provided showing torque, speed, and efficiency at varying torque levels from 0 to 18 lb-in.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, and 1.42 amps of current. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start/stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 01009 specsheet
This document provides specifications for a PM 6015 130V DC motor with a rating of 1535 RPM, 2.2 lb-in of torque, and 0.46 amps of current. The motor has no gearbox, runs continuously, and has an efficiency of 67.3%. It can produce up to 8.19 lb-in of torque at startup with 1.59 amps of current. Charts show torque and efficiency at different speeds. The motor is sold and serviced by Electromate.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 62336 specsheet
This document provides specifications for a PM 8014 motor with a 61:1 gearbox. Key specifications include a voltage of 115V, speed of 1400 RPM, output of 23 RPM, 139.6 lb-in of torque, and efficiencies of 75.5% for the gearbox, 59.5% for the motor, and 45% for the overall system. Performance curves are provided showing torque, speed, and efficiency over a range of torque values from 0 to 36 lb-in.
What's hot (15)
Similar to Groschopp 62453 specsheet
Groschopp 62423 specsheet
This document provides specifications for a small electric motor system including a PM 6015 motor rated at 13.3 rpm, 72.1 lb-in of torque, and 0.0152 HP powered by 115V. The system includes a 184:1 ratio gearbox. Performance curves show torque and efficiency at varying speeds, with maximum efficiency of 60.2% for the gearbox and 18% for the overall system. Start/stall conditions draw 2.79A and produce 1180.49 lb-in of torque.
Groschopp 62339 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 160:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM, and can output up to 8.8 RPM and 331.8 lb-in of torque. System efficiency is rated at 40.8%. Start/stall conditions are 4 amps of current and 2543.31 lb-in of torque. A graph shows torque and efficiency at varying speeds between 0-2700 RPM. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 62412 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 377:1 ratio gearbox. Key specifications include a 3.5 rpm rated speed, 298.5 lb-in torque, and system efficiency of 27.0%. Performance curves show torque and efficiency at varying speeds from 0 to 1400 rpm.
Groschopp 62424 specsheet
This document provides specifications for a PM 6015 motor with a 246:1 gearbox. It operates at 115v and 2450 rpm, producing 9.9 rpm and 126.7 lb-in of torque at 0.63 amps of current. The gearbox efficiency is 39.2%, the motor efficiency is 60.2%, and the overall system efficiency is 23.6%. Startup requires 2.79 amps and produces 1548.79 lb-in of torque. Performance curves are provided for torque, speed, and efficiency at varying rpm. It is sold and serviced by Electromate.
Groschopp 62410 specsheet
This document provides specifications for a PM 6015 motor with a 184:1 ratio gearbox. The motor runs at 1300 rpm on 115v power, with an output speed of 7.2 rpm and torque of 115 lb-in. It has a continuous duty cycle and system efficiency of 21.3%. Charts show torque and efficiency levels across speeds from 0 to 900 rpm. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 62341 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 246:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM and produces 5.7 RPM of output. It has a rated torque of 487.1 lb-in, current of 0.91 amps, and efficiency between the motor and gearbox of 38.9%. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 62312 specsheet
This document provides specifications for a PM 6015 motor with a PL 7300 377:1 ratio gearbox. The motor runs on 115V, has a speed of 1300 RPM, and outputs 3.5 RPM and 314.8 lb-in of torque at 0.47 amps and 13 watts or 0.0175 HP. The gearbox has an efficiency of 52.4% and the motor 54.3% for a total system efficiency of 28.4%. Start conditions require 1.54 amps and 2022.72 lb-in of torque. A graph shows efficiency between 10-90% as torque varies from 0-4.5 lb-in and speed from 0-2250 RPM.
Groschopp 62312 specsheet
This document provides specifications for a PM 6015 motor with a PL 7300 377:1 ratio gearbox. The motor runs on 115V and has a no load speed of 1300 RPM. It produces 3.5 RPM of output, 314.8 lb-in of torque, and 28.4% system efficiency. Startup requires 1.54 amps and produces 2022.72 lb-in of torque. Performance curves are provided showing speed, torque, and efficiency at varying loads.
Groschopp 62441 specsheet
This document provides specifications for a PM 8014 motor with a 115V voltage, 1400 RPM speed, and 246:1 ratio gearbox. It details the motor's rating of 5.7 RPM speed, 459.5 lb-in torque, and 0.91 amp current draw, with a continuous duty cycle. Charts show torque and efficiency at varying speeds. The motor has a start/stall current of 4.00 amps and 3359.39 lb-in torque.
Groschopp 62446 specsheet
This document provides specifications for a PM 8014 motor with a 20:1 gearbox. Key details include:
- The motor operates at 115V and 2500 rpm, with the gearbox providing an output of 122.6 rpm.
- At full load, the motor draws 1.17 amps and produces 39 watts of power (0.0518 HP).
- Efficiency is rated at 51.2% for the gearbox, 63.6% for the motor, and 32.6% for the overall system.
- Startup current is 7.18 amps with a stall torque of 427.21 lb-in.
Groschopp 62309 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 160:1 ratio PL 7300 gearbox. Key specifications include an 8.2 rpm speed, 151.2 lb-in of torque, and efficiencies of 59.3% for the gearbox, 54.3% for the motor, and 32.2% for the overall system. Performance curves are provided showing torque, speed, and efficiency over different rpm values.
Groschopp 62445 specsheet
This document provides specifications for a PM 8014 motor with a 15:1 ratio gearbox. Key specifications include a rated speed of 163.5 rpm, torque of 16.8 lb-in, and efficiency ratings of 43% for the gearbox, 63.6% for the motor, and 27.3% for the overall system. Charts show torque, speed, and efficiency at varying torque levels. The motor has a startup current of 7.18 amps and stall torque of 325.34 lb-in.
Groschopp 62411 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 246:1 ratio RP 7300 gearbox. Key specifications include a 5.4 rpm speed, 181.2 lb-in torque, and 25.1% system efficiency. Start/stall conditions are 1.54 amps current and 1285.56 lb-in torque. A graph shows torque and efficiency at varying speeds.
Groschopp 62300 specsheet
This document provides specifications for a PM 6015 motor with a 5:1 ratio gearbox. The motor runs on 115V, has a no-load speed of 1300 RPM, and can output 263.6 RPM, 2.9 lb-in of torque, and 9 watts of power at 0.0122 HP. The gearbox efficiency is 36.7%, the motor efficiency is 54.3%, and the system efficiency is 19.9%. Startup current is 1.54 amps with 32.42 lb-in of torque. Performance curves are provided for torque, speed, efficiency at various loads. The motor is sold and serviced by Electromate.
Groschopp 62311 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 246:1 ratio PL 7300 gearbox. Key specifications include a 5.4 rpm rated speed producing 191.9 lb-in of torque at 0.47 amps of current. The motor has a 54.3% efficiency while the gearbox is 48.9% efficient, resulting in a 26.6% system efficiency. Under start/stall conditions the motor draws 1.54 amps and produces 1399.07 lb-in of torque. Performance curves show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 62311 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 246:1 ratio PL 7300 gearbox. Key specifications include a 5.4 rpm rated speed producing 191.9 lb-in of torque at 0.47 amps of current. The motor has a 54.3% efficiency while the gearbox is 48.9% efficient, resulting in a 26.6% system efficiency. Under start/stall conditions the motor draws 1.54 amps and produces 1399.07 lb-in of torque. Performance curves show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 62310 specsheet
This document provides specifications for a PM 6015 motor with a 184:1 gearbox. The motor runs on 115V, has a no load speed of 1300 RPM, and can output up to 7.2 RPM and 124.4 lb-in of torque under continuous duty. Performance metrics include a gearbox efficiency of 42.4%, motor efficiency of 54.3%, and system efficiency of 23.0%. Charts show torque and speed output as well as efficiency at varying speeds.
Groschopp 62444 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, rating, efficiency, start/stall conditions, and torque and speed curves. The motor runs at 115V and 2500 rpm with a 10:1 gearbox ratio. It has a rating of 245.2 rpm, 13.7 lb-in of torque, and 33.6% system efficiency. Under start/stall conditions it draws 7.18 amps and provides 221.19 lb-in of torque. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 62447 specsheet
This document provides specifications for a PM 8014 motor with a 115V voltage and 2500 rpm speed. It has a 30:1 ratio RP 7300 gearbox. Key specifications include an 81.7 rpm speed, 38.8 lb-in torque, and 31.6% system efficiency. Start/stall conditions are 7.18 amps current and 606.22 lb-in torque. Performance curves show torque, speed, efficiency at varying loads from 10-90 lb-in. It is sold and serviced by Electromate.
Similar to Groschopp 62453 specsheet (19)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Building RAG with self-deployed Milvus vector database and Snowpark Container...
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Recently uploaded (20)
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Generative AI Deep Dive: Advancing from Proof of Concept to Production
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Monitoring Java Application Security with JDK Tools and JFR Events
Monitoring Java Application Security with JDK Tools and JFR Events
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Groschopp 62453 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: PM 8014 115 v FWR 2500 rpm 2 Poles RP 7300 184:1 Ratio Product ID: 62453 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 13.3 rpm 253.7lb-in 1.17 amps 40 watts 0.0536 HP Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 53.0 % 63.6 % 33.7 % Start/Stall Conditions: Current: Torque: 7.18 amps 3102.95 lb-in Constants: Ke: 42.38 v/krpm Kt: 3.58 lb-in/amp Torque (lb-in) Speed RPM Efficiency 0.0 0 2.0 400 4.0 800 6.0 1200 8.0 1600 10.0 2000 12.0 2400 14.0 2800 16.0 3200 18.0 3600 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com