Groschopp 62436 specsheet
•
0 likes•47 views
This document provides specifications for a PM 8014 motor with a 61:1 gearbox. The motor runs on 115V, has a top speed of 23 RPM, and maximum torque of 130 lb-in. It has a startup current of 4 amps and can continuously operate with 0.91 amps of current. The gearbox and motor each have efficiencies around 70% and 60% respectively, resulting in an overall system efficiency of 42%. Performance curves are provided showing torque, speed, and efficiency at varying loads.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 62336 specsheet
This document provides specifications for a PM 8014 motor with a 61:1 gearbox. Key specifications include a voltage of 115V, speed of 1400 RPM, output of 23 RPM, 139.6 lb-in of torque, and efficiencies of 75.5% for the gearbox, 59.5% for the motor, and 45% for the overall system. Performance curves are provided showing torque, speed, and efficiency over a range of torque values from 0 to 36 lb-in.
Groschopp 62449 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, output ratings, efficiency ratings, start/stall conditions, and torque/speed curve. The motor runs on 115v, spins at 2500 rpm, has a 61:1 gearbox ratio, and can output up to 40.2 rpm, 106 lb-in of torque, and 50 watts of power at 42.5% system efficiency. It draws up to 7.18 amps and produces 1197.57 lb-in of torque under start/stall conditions. A graph shows its torque and efficiency at varying speeds. It was prepared by Groschopp.com and can be purchased from Electromate.
Groschopp 62442 specsheet
This document provides specifications for a PM 8014 motor with a 377:1 gearbox including voltage, speed, torque, current, output power, duty cycle, efficiency, start/stall conditions, and torque/speed curves. Key specifications are a 115V motor running at 1400 rpm delivering 0.0392 HP at 3.8 rpm with system efficiency of 35.9% and gearbox and motor efficiencies of 60% and 59.9% respectively.
Groschopp 62450 specsheet
This document provides specifications for a PM 8014 motor with a 115V voltage and 2500 RPM speed that is paired with a RP 7300 90:1 ratio gearbox. Key specifications include a rated speed of 27.2 RPM, torque of 140.8 lb-in, current of 1.17 amps, output power of 45 watts, and efficiency ratings of 60.2% for the gearbox, 63.6% for the motor, and 38.2% for the overall system. Start/stall conditions are listed as 7.18 amps current and 1671.53 lb-in torque. A graph shows torque and efficiency at varying speeds.
Groschopp 62339 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 160:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM, and can output up to 8.8 RPM and 331.8 lb-in of torque. System efficiency is rated at 40.8%. Start/stall conditions are 4 amps of current and 2543.31 lb-in of torque. A graph shows torque and efficiency at varying speeds from 0 to 2700 RPM. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 62453 specsheet
This document provides specifications for a small electric motor system including a PM 8014 motor rated at 13.3 rpm, 253.7 lb-in of torque, and 40 watts of output power. The system includes a 184:1 ratio gearbox. Key specifications listed are the motor voltage, speed, current, efficiency ratings, start/stall conditions, and torque-speed curves. The motor, gearbox, and overall system efficiencies are 53.0%, 63.6%, and 33.7% respectively.
Groschopp 04310 specsheet
The document provides specifications for a PM 10816 motor with a voltage of 180V DC, speed of 2400 rpm, and no gearbox. Key specifications include a rating of 2384 rpm and 8.3 lb-in of torque drawing 1.49 amps of current. The motor has a continuous duty cycle and efficiency of 82.6% both alone and in a system. It can produce up to 80 lb-in of torque when drawing 13.4 amps of current at stall. Performance curves show torque output over speed range from 0-2700 rpm. The motor is sold and serviced by Electromate.
Groschopp 62338 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 120:1 ratio gearbox. Key specifications include a voltage of 115v, speed of 1400 rpm, output of 11.7 rpm, 239.4 lb-in of torque, and efficiencies of 65.9% for the gearbox and 39.2% for the system overall. Performance curves are provided showing torque, speed, and efficiency over a range of RPMs.
Recommended
Groschopp 62336 specsheet
This document provides specifications for a PM 8014 motor with a 61:1 gearbox. Key specifications include a voltage of 115V, speed of 1400 RPM, output of 23 RPM, 139.6 lb-in of torque, and efficiencies of 75.5% for the gearbox, 59.5% for the motor, and 45% for the overall system. Performance curves are provided showing torque, speed, and efficiency over a range of torque values from 0 to 36 lb-in.
Groschopp 62449 specsheet
This document provides specifications for a motor including its voltage, speed, gearbox ratio, output ratings, efficiency ratings, start/stall conditions, and torque/speed curve. The motor runs on 115v, spins at 2500 rpm, has a 61:1 gearbox ratio, and can output up to 40.2 rpm, 106 lb-in of torque, and 50 watts of power at 42.5% system efficiency. It draws up to 7.18 amps and produces 1197.57 lb-in of torque under start/stall conditions. A graph shows its torque and efficiency at varying speeds. It was prepared by Groschopp.com and can be purchased from Electromate.
Groschopp 62442 specsheet
This document provides specifications for a PM 8014 motor with a 377:1 gearbox including voltage, speed, torque, current, output power, duty cycle, efficiency, start/stall conditions, and torque/speed curves. Key specifications are a 115V motor running at 1400 rpm delivering 0.0392 HP at 3.8 rpm with system efficiency of 35.9% and gearbox and motor efficiencies of 60% and 59.9% respectively.
Groschopp 62450 specsheet
This document provides specifications for a PM 8014 motor with a 115V voltage and 2500 RPM speed that is paired with a RP 7300 90:1 ratio gearbox. Key specifications include a rated speed of 27.2 RPM, torque of 140.8 lb-in, current of 1.17 amps, output power of 45 watts, and efficiency ratings of 60.2% for the gearbox, 63.6% for the motor, and 38.2% for the overall system. Start/stall conditions are listed as 7.18 amps current and 1671.53 lb-in torque. A graph shows torque and efficiency at varying speeds.
Groschopp 62339 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 160:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM, and can output up to 8.8 RPM and 331.8 lb-in of torque. System efficiency is rated at 40.8%. Start/stall conditions are 4 amps of current and 2543.31 lb-in of torque. A graph shows torque and efficiency at varying speeds from 0 to 2700 RPM. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 62453 specsheet
This document provides specifications for a small electric motor system including a PM 8014 motor rated at 13.3 rpm, 253.7 lb-in of torque, and 40 watts of output power. The system includes a 184:1 ratio gearbox. Key specifications listed are the motor voltage, speed, current, efficiency ratings, start/stall conditions, and torque-speed curves. The motor, gearbox, and overall system efficiencies are 53.0%, 63.6%, and 33.7% respectively.
Groschopp 04310 specsheet
The document provides specifications for a PM 10816 motor with a voltage of 180V DC, speed of 2400 rpm, and no gearbox. Key specifications include a rating of 2384 rpm and 8.3 lb-in of torque drawing 1.49 amps of current. The motor has a continuous duty cycle and efficiency of 82.6% both alone and in a system. It can produce up to 80 lb-in of torque when drawing 13.4 amps of current at stall. Performance curves show torque output over speed range from 0-2700 rpm. The motor is sold and serviced by Electromate.
Groschopp 62338 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 120:1 ratio gearbox. Key specifications include a voltage of 115v, speed of 1400 rpm, output of 11.7 rpm, 239.4 lb-in of torque, and efficiencies of 65.9% for the gearbox and 39.2% for the system overall. Performance curves are provided showing torque, speed, and efficiency over a range of RPMs.
Groschopp 62439 specsheet
This document provides specifications for a PM 8014 motor with a RP 7300 160:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM, and the gearbox provides an output speed of 8.8 RPM. The motor has a rating of 0.0437 HP, draws 0.91 amps of current, and can produce up to 314.7 lb-in of torque. Charts show the motor's torque and efficiency at different speeds.
Groschopp 62438 specsheet
This document provides specifications for a small electric motor system including a PM 8014 motor rated at 11.7 rpm, 226.5 lb-in of torque, and 0.0419 HP powered by 115V. The system includes a RP 7300 120:1 ratio gearbox with an overall efficiency of 37.1%. Performance curves are provided showing torque, speed, and efficiency over a range of loads.
Groschopp 62340 specsheet
This document provides specifications for a PM 8014 motor with a 184:1 gearbox including its voltage, speed, torque, current, output, duty cycle, efficiency, start/stall conditions, and torque and efficiency curves versus speed. The motor runs at 1400 rpm on 115v with an output of 7.6 rpm, 0.0404 HP, and 334.7 lb-in of torque. The gearbox, motor, and system efficiencies are 60.1%, 59.5%, and 35.8% respectively.
Groschopp 62342 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 377:1 ratio gearbox. The motor runs on 115V, produces 3.7 rpm and 749.8 lb-in of torque at 0.91 amps and 33 watts of power. The gearbox and motor have efficiencies of 65.6% and 59.5% respectively, yielding a system efficiency of 39.1%. Startup requires 4 amps and produces 5316.82 lb-in of torque. Performance curves show torque and speed vs efficiency from 0-5400 rpm. The motor is sold and serviced by Electromate.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, and 1.42 amps of current. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start/stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 62452 specsheet
This document provides specifications for a PM 8014 motor with a 115V voltage and 2500 rpm speed that is paired with a RP 7300 gearbox with a 160:1 ratio. Key specifications include a rated speed of 15.3 rpm, torque of 262.1 lb-in, current of 1.17 amps, and power output of 48 watts. The motor has an efficiency of 63.6%, the gearbox 63%, and the overall system 40%. Start/stall conditions are listed as 7.18 amps current and 2838.62 lb-in torque. A graph shows torque and efficiency at varying speeds.
Groschopp 62440 specsheet
This document provides specifications for a PM 8014 motor with a 184:1 ratio gearbox. The motor runs on 115V, has a top speed of 1400 RPM, and can output up to 7.6 RPM and 317.1 lb-in of torque. Performance statistics are provided, including current, power, efficiency, and torque curves. The motor is sold and serviced by Electromate.
Groschopp 04309 specsheet
This document provides specifications for a PM 10816 motor with a voltage of 130V DC, speed of 2400 rpm, and no gearbox. Key specifications include a rating of 2413 rpm and 8.6 lb-in of torque drawing 2.20 amps of current. Start/stall conditions are 18.88 amps and 80 lb-in of torque. Performance curves are provided showing torque, speed, and efficiency over various rpm ranges. The motor has an efficiency of 81.9% and is intended for continuous duty applications.
Groschopp 62310 specsheet
This document provides specifications for a PM 6015 motor with a 184:1 gearbox. The motor runs on 115V, has a no load speed of 1300 RPM, and can output up to 7.2 RPM and 124.4 lb-in of torque under continuous duty. Performance metrics include a gearbox efficiency of 42.4%, motor efficiency of 54.3%, and system efficiency of 23.0%. Charts show torque and speed output as well as efficiency at varying speeds.
Groschopp 62423 specsheet
This document provides specifications for a small electric motor system including a PM 6015 motor rated at 13.3 rpm, 72.1 lb-in of torque, and 0.0152 HP powered by 115V. The system includes a 184:1 ratio gearbox. Performance curves show torque and efficiency at varying speeds, with maximum efficiency of 60.2% for the gearbox and 18% for the overall system. Start/stall conditions draw 2.79A and produce 1180.49 lb-in of torque.
Groschopp 62403 specsheet
This document provides specifications for a PM 6015 motor with a 20:1 gearbox. It lists the motor's voltage, speed, gearbox ratio, and product ID. It also details the motor's rating, speed, torque, current, output power, duty cycle, efficiency rates, start/stall conditions, torque-speed curve, and is sold and serviced by Electromate.
Groschopp 62422 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage powered at 2450 RPM. It has a 160:1 ratio RP 7300 gearbox. The motor has a rating of 15.3 RPM and 103.6 lb-in of torque drawing 0.63 amps of current and producing 19 watts of output power equivalent to 0.0251 HP. It has a continuous duty cycle with system efficiency of 29.7%, gearbox efficiency of 49.3%, and motor efficiency of 60.2%. It draws 2.79 amps of current and produces 1079.02 lb-in of torque under start/stall conditions.
Groschopp 62410 specsheet
This document provides specifications for a PM 6015 motor with a 184:1 ratio gearbox. The motor runs at 1300 rpm on 115v power, with an output speed of 7.2 rpm and torque of 115 lb-in. It has a continuous duty cycle and system efficiency of 21.3%. Charts show torque and efficiency levels across speeds from 0 to 900 rpm. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 62332 specsheet
The document provides specifications for a PM 8014 motor with a PL 7300 15:1 ratio gearbox. Key specifications include a voltage of 115V, speed of 1400 RPM, output of 93.3 RPM, 26.3 lb-in of torque, and efficiencies of 58% for the gearbox and 59.5% for the motor. Performance curves are provided showing torque, speed, and efficiency over various loads.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
Groschopp 62437 specsheet
This document provides specifications for a PM 8014 motor with a 90:1 gearbox including its voltage, speed, torque, current, output power, duty cycle, efficiency, start/stall conditions, and torque/speed curve. The motor runs at 1400 rpm on 115v with an output of 0.0431HP. The gearbox has a 64% efficiency while the motor has 59.5% and the overall system efficiency is 38.1%.
Groschopp 62337 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 90:1 ratio gearbox. Key specifications include a voltage of 115v, speed of 1400 rpm, output of 15.6 rpm and 184.9 lb-in of torque. Performance metrics are given like efficiency of the gearbox (67.8%), motor (59.5%) and system (40.4%). A graph shows torque and efficiency over a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 62339 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 160:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM, and can output up to 8.8 RPM and 331.8 lb-in of torque. System efficiency is rated at 40.8%. Start/stall conditions are 4 amps of current and 2543.31 lb-in of torque. A graph shows torque and efficiency at varying speeds between 0-2700 RPM. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 62324 specsheet
This document provides specifications for a PM 6015 motor with a PL 7300 246:1 ratio gearbox. Key specifications include a voltage of 115V, speed of 2450 RPM, output of 9.9 RPM and 136.3 lb-in of torque. Performance metrics are provided like current draw of 0.63 amps, efficiency of the motor at 60.2%, gearbox at 42.2% and overall system at 25.4%. A graph shows torque and efficiency at varying speeds. The motor can be purchased from Electromate.
Groschopp 62412 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 377:1 ratio gearbox. Key specifications include a 3.5 rpm rated speed, 298.5 lb-in torque, and system efficiency of 27.0%. Performance curves show torque and efficiency at varying speeds from 0 to 1400 rpm.
Groschopp 62341 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 246:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM and produces 5.7 RPM of output. It has a rated torque of 487.1 lb-in, current of 0.91 amps, and efficiency between the motor and gearbox of 38.9%. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 62424 specsheet
This document provides specifications for a PM 6015 motor with a 246:1 gearbox. It operates at 115v and 2450 rpm, producing 9.9 rpm and 126.7 lb-in of torque at 0.63 amps of current. The gearbox efficiency is 39.2%, the motor efficiency is 60.2%, and the overall system efficiency is 23.6%. Startup requires 2.79 amps and produces 1548.79 lb-in of torque. Performance curves are provided for torque, speed, and efficiency at varying rpm. It is sold and serviced by Electromate.
More Related Content
What's hot
Groschopp 62439 specsheet
This document provides specifications for a PM 8014 motor with a RP 7300 160:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM, and the gearbox provides an output speed of 8.8 RPM. The motor has a rating of 0.0437 HP, draws 0.91 amps of current, and can produce up to 314.7 lb-in of torque. Charts show the motor's torque and efficiency at different speeds.
Groschopp 62438 specsheet
This document provides specifications for a small electric motor system including a PM 8014 motor rated at 11.7 rpm, 226.5 lb-in of torque, and 0.0419 HP powered by 115V. The system includes a RP 7300 120:1 ratio gearbox with an overall efficiency of 37.1%. Performance curves are provided showing torque, speed, and efficiency over a range of loads.
Groschopp 62340 specsheet
This document provides specifications for a PM 8014 motor with a 184:1 gearbox including its voltage, speed, torque, current, output, duty cycle, efficiency, start/stall conditions, and torque and efficiency curves versus speed. The motor runs at 1400 rpm on 115v with an output of 7.6 rpm, 0.0404 HP, and 334.7 lb-in of torque. The gearbox, motor, and system efficiencies are 60.1%, 59.5%, and 35.8% respectively.
Groschopp 62342 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 377:1 ratio gearbox. The motor runs on 115V, produces 3.7 rpm and 749.8 lb-in of torque at 0.91 amps and 33 watts of power. The gearbox and motor have efficiencies of 65.6% and 59.5% respectively, yielding a system efficiency of 39.1%. Startup requires 4 amps and produces 5316.82 lb-in of torque. Performance curves show torque and speed vs efficiency from 0-5400 rpm. The motor is sold and serviced by Electromate.
Groschopp 04104 specsheet
This document provides specifications for a PM 8018 motor with a rating of 2566 rpm, 7.3 lb-in of torque, and 1.42 amps of current. The motor runs continuously at 85.8% efficiency without a gearbox. It can produce 10.77 amps of current and 59.38 lb-in of torque under start/stall conditions. Charts show torque and efficiency at different speeds.
Groschopp 62452 specsheet
This document provides specifications for a PM 8014 motor with a 115V voltage and 2500 rpm speed that is paired with a RP 7300 gearbox with a 160:1 ratio. Key specifications include a rated speed of 15.3 rpm, torque of 262.1 lb-in, current of 1.17 amps, and power output of 48 watts. The motor has an efficiency of 63.6%, the gearbox 63%, and the overall system 40%. Start/stall conditions are listed as 7.18 amps current and 2838.62 lb-in torque. A graph shows torque and efficiency at varying speeds.
Groschopp 62440 specsheet
This document provides specifications for a PM 8014 motor with a 184:1 ratio gearbox. The motor runs on 115V, has a top speed of 1400 RPM, and can output up to 7.6 RPM and 317.1 lb-in of torque. Performance statistics are provided, including current, power, efficiency, and torque curves. The motor is sold and serviced by Electromate.
Groschopp 04309 specsheet
This document provides specifications for a PM 10816 motor with a voltage of 130V DC, speed of 2400 rpm, and no gearbox. Key specifications include a rating of 2413 rpm and 8.6 lb-in of torque drawing 2.20 amps of current. Start/stall conditions are 18.88 amps and 80 lb-in of torque. Performance curves are provided showing torque, speed, and efficiency over various rpm ranges. The motor has an efficiency of 81.9% and is intended for continuous duty applications.
Groschopp 62310 specsheet
This document provides specifications for a PM 6015 motor with a 184:1 gearbox. The motor runs on 115V, has a no load speed of 1300 RPM, and can output up to 7.2 RPM and 124.4 lb-in of torque under continuous duty. Performance metrics include a gearbox efficiency of 42.4%, motor efficiency of 54.3%, and system efficiency of 23.0%. Charts show torque and speed output as well as efficiency at varying speeds.
Groschopp 62423 specsheet
This document provides specifications for a small electric motor system including a PM 6015 motor rated at 13.3 rpm, 72.1 lb-in of torque, and 0.0152 HP powered by 115V. The system includes a 184:1 ratio gearbox. Performance curves show torque and efficiency at varying speeds, with maximum efficiency of 60.2% for the gearbox and 18% for the overall system. Start/stall conditions draw 2.79A and produce 1180.49 lb-in of torque.
Groschopp 62403 specsheet
This document provides specifications for a PM 6015 motor with a 20:1 gearbox. It lists the motor's voltage, speed, gearbox ratio, and product ID. It also details the motor's rating, speed, torque, current, output power, duty cycle, efficiency rates, start/stall conditions, torque-speed curve, and is sold and serviced by Electromate.
Groschopp 62422 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage powered at 2450 RPM. It has a 160:1 ratio RP 7300 gearbox. The motor has a rating of 15.3 RPM and 103.6 lb-in of torque drawing 0.63 amps of current and producing 19 watts of output power equivalent to 0.0251 HP. It has a continuous duty cycle with system efficiency of 29.7%, gearbox efficiency of 49.3%, and motor efficiency of 60.2%. It draws 2.79 amps of current and produces 1079.02 lb-in of torque under start/stall conditions.
Groschopp 62410 specsheet
This document provides specifications for a PM 6015 motor with a 184:1 ratio gearbox. The motor runs at 1300 rpm on 115v power, with an output speed of 7.2 rpm and torque of 115 lb-in. It has a continuous duty cycle and system efficiency of 21.3%. Charts show torque and efficiency levels across speeds from 0 to 900 rpm. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 62332 specsheet
The document provides specifications for a PM 8014 motor with a PL 7300 15:1 ratio gearbox. Key specifications include a voltage of 115V, speed of 1400 RPM, output of 93.3 RPM, 26.3 lb-in of torque, and efficiencies of 58% for the gearbox and 59.5% for the motor. Performance curves are provided showing torque, speed, and efficiency over various loads.
Groschopp 04100 specsheet
This document provides specifications for a 12V DC motor with a maximum speed of 2250 RPM and torque of 5.2 lb-in. The motor has no gearbox and runs continuously with a duty cycle of on/off. It has a startup current of 90.31 amps and startup torque of 33.78 lb-in. Charts show the motor's torque and efficiency levels across a range of speeds.
What's hot (15)
Similar to Groschopp 62436 specsheet
Groschopp 62437 specsheet
This document provides specifications for a PM 8014 motor with a 90:1 gearbox including its voltage, speed, torque, current, output power, duty cycle, efficiency, start/stall conditions, and torque/speed curve. The motor runs at 1400 rpm on 115v with an output of 0.0431HP. The gearbox has a 64% efficiency while the motor has 59.5% and the overall system efficiency is 38.1%.
Groschopp 62337 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 90:1 ratio gearbox. Key specifications include a voltage of 115v, speed of 1400 rpm, output of 15.6 rpm and 184.9 lb-in of torque. Performance metrics are given like efficiency of the gearbox (67.8%), motor (59.5%) and system (40.4%). A graph shows torque and efficiency over a range of speeds. The motor is sold and serviced by Electromate.
Groschopp 62339 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 160:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM, and can output up to 8.8 RPM and 331.8 lb-in of torque. System efficiency is rated at 40.8%. Start/stall conditions are 4 amps of current and 2543.31 lb-in of torque. A graph shows torque and efficiency at varying speeds between 0-2700 RPM. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 62324 specsheet
This document provides specifications for a PM 6015 motor with a PL 7300 246:1 ratio gearbox. Key specifications include a voltage of 115V, speed of 2450 RPM, output of 9.9 RPM and 136.3 lb-in of torque. Performance metrics are provided like current draw of 0.63 amps, efficiency of the motor at 60.2%, gearbox at 42.2% and overall system at 25.4%. A graph shows torque and efficiency at varying speeds. The motor can be purchased from Electromate.
Groschopp 62412 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 377:1 ratio gearbox. Key specifications include a 3.5 rpm rated speed, 298.5 lb-in torque, and system efficiency of 27.0%. Performance curves show torque and efficiency at varying speeds from 0 to 1400 rpm.
Groschopp 62341 specsheet
This document provides specifications for a PM 8014 motor with a PL 7300 246:1 ratio gearbox. The motor runs on 115V, has a speed of 1400 RPM and produces 5.7 RPM of output. It has a rated torque of 487.1 lb-in, current of 0.91 amps, and efficiency between the motor and gearbox of 38.9%. Charts show the motor's torque and efficiency at varying speeds.
Groschopp 62424 specsheet
This document provides specifications for a PM 6015 motor with a 246:1 gearbox. It operates at 115v and 2450 rpm, producing 9.9 rpm and 126.7 lb-in of torque at 0.63 amps of current. The gearbox efficiency is 39.2%, the motor efficiency is 60.2%, and the overall system efficiency is 23.6%. Startup requires 2.79 amps and produces 1548.79 lb-in of torque. Performance curves are provided for torque, speed, and efficiency at varying rpm. It is sold and serviced by Electromate.
Groschopp 62323 specsheet
This document provides specifications for a small electric motor system including a PM 6015 motor that operates at 115v and 2450 rpm, paired with a PL 7300 gearbox with a 184:1 ratio. Key specifications listed are a top speed of 13.3 rpm, torque of 80.3 lb-in, current of 0.63 amps, and power output of 13 watts or 0.0169 HP. The system has a maximum efficiency of 20% with the individual efficiencies of the gearbox being 33.2%, motor being 60.2%. Startup current and torque are also provided along with torque and speed curves and contact information for the distributor.
Groschopp 62311 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 246:1 ratio PL 7300 gearbox. Key specifications include a 5.4 rpm rated speed producing 191.9 lb-in of torque at 0.47 amps of current. The motor has a 54.3% efficiency while the gearbox is 48.9% efficient, resulting in a 26.6% system efficiency. Under start/stall conditions the motor draws 1.54 amps and produces 1399.07 lb-in of torque. Performance curves show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 62311 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 246:1 ratio PL 7300 gearbox. Key specifications include a 5.4 rpm rated speed producing 191.9 lb-in of torque at 0.47 amps of current. The motor has a 54.3% efficiency while the gearbox is 48.9% efficient, resulting in a 26.6% system efficiency. Under start/stall conditions the motor draws 1.54 amps and produces 1399.07 lb-in of torque. Performance curves show torque and efficiency at varying speeds. The motor is sold and serviced by Electromate.
Groschopp 62330 specsheet
This document provides specifications for a PM 8014 motor with a 5:1 ratio PL 7300 gearbox. Key specifications include a voltage of 115V, speed of 280 RPM, torque of 9.5 lb-in, current of 0.91 amps, and power output of 32 watts. Efficiency is 62.9% for the gearbox, 59.5% for the motor, and 37.4% for the overall system. Start/stall current is 4.00 amps with a torque of 97.28 lb-in. Performance curves are provided for torque, speed, and efficiency at various operating points.
Groschopp 62433 specsheet
This document provides specifications for a PM 8014 motor with a 20:1 gearbox. Key specifications include a voltage of 115V, speed of 70 rpm, torque of 33.9 lb-in, current of 0.91 amps, and power output of 28 watts. The gearbox efficiency is 56%, motor efficiency is 59.5%, and system efficiency is 33.3%. Start/stall current is 4 amps and start/stall torque is 353.36 lb-in. A graph shows torque, speed, rpm, and efficiency curves. The motor is sold and serviced by Electromate.
Groschopp 62322 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 2450 RPM speed, and 160:1 ratio PL 7300 gearbox. Key specifications include a 15.3 RPM no load speed, 112.8 lb-in of torque, 0.63A of current, and 32.3% system efficiency. Start/stall conditions are listed as 2.79A of current and 1174.24 lb-in of torque. Performance curves are provided showing torque, speed, and efficiency at varying torque levels from 0 to 18 lb-in.
Groschopp 62300 specsheet
This document provides specifications for a PM 6015 motor with a 5:1 ratio gearbox. The motor runs on 115V, has a no-load speed of 1300 RPM, and can output 263.6 RPM, 2.9 lb-in of torque, and 9 watts of power at 0.0122 HP. The gearbox efficiency is 36.7%, the motor efficiency is 54.3%, and the system efficiency is 19.9%. Startup current is 1.54 amps with 32.42 lb-in of torque. Performance curves are provided for torque, speed, efficiency at various loads. The motor is sold and serviced by Electromate.
Groschopp 62309 specsheet
This document provides specifications for a PM 6015 motor with a 115V voltage, 1300 rpm speed, and 160:1 ratio PL 7300 gearbox. Key specifications include an 8.2 rpm speed, 151.2 lb-in of torque, and efficiencies of 59.3% for the gearbox, 54.3% for the motor, and 32.2% for the overall system. Performance curves are provided showing torque, speed, and efficiency over different rpm values.
Groschopp 62441 specsheet
This document provides specifications for a PM 8014 motor with a 115V voltage, 1400 RPM speed, and 246:1 ratio gearbox. It details the motor's rating of 5.7 RPM speed, 459.5 lb-in torque, and 0.91 amp current draw, with a continuous duty cycle. Charts show torque and efficiency at varying speeds. The motor has a start/stall current of 4.00 amps and 3359.39 lb-in torque.
Groschopp 62451 specsheet
This document provides specifications for a small electric motor including its voltage, speed, gearbox ratio, torque, current, output power, duty cycle, efficiency rates, start/stall conditions, and speed versus torque and efficiency performance curves. Key details are the motor runs at 115v and 2500 rpm, has a 120:1 gearbox ratio, produces 20.4 rpm and 181.5 lb-in of torque at 1.17 amps and 44 watts of power output.
Groschopp 01005 specsheet
This document provides specifications for a small DC motor including its voltage, speed, power rating, torque, current draw, efficiency, and performance curves showing torque and speed vs efficiency. Key details are a 115V PM 6015 motor with a no-load speed of 2450rpm and a continuous power rating of 38 watts at 60.2% efficiency. Performance is shown in charts and the motor is available from Electromate.
Groschopp 01005 specsheet
This document provides specifications for a small DC motor including its voltage, speed, power rating, torque, current draw, efficiency, and performance curves showing torque and speed. Key details are that it is a 115V PM 6015 motor without a gearbox, rated at 2443 RPM, 1.3 lb-in of torque, and 60.2% efficiency. It also lists startup current and torque along with motor constants.
Groschopp 62333 specsheet
This document provides specifications for a PM 8014 motor with a 20:1 gearbox. Key specifications include a voltage of 115V, speed of 70 rpm, torque of 39.6 lb-in, and efficiencies of 65.4% for the gearbox and 59.5% for the motor. Charts show the motor's torque and speed performance as well as efficiency at varying torque levels. The motor has a continuous duty cycle and start/stall current of 4 amps and torque of 372.75 lb-in.
Similar to Groschopp 62436 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Securing your Kubernetes cluster_ a step-by-step guide to success !
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentations20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Recently uploaded (20)
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Securing your Kubernetes cluster_ a step-by-step guide to success !
Securing your Kubernetes cluster_ a step-by-step guide to success !
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Monitoring Java Application Security with JDK Tools and JFR Events
Monitoring Java Application Security with JDK Tools and JFR Events
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Groschopp 62436 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: PM 8014 115 v FWR 1400 rpm 2 Poles RP 7300 61:1 Ratio Product ID: 62436 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 23.0 rpm 130.0lb-in 0.91 amps 35 watts 0.0473 HP Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 70.3 % 59.5 % 41.9 % Start/Stall Conditions: Current: Torque: 4.00 amps 982.99 lb-in Constants: Ke: 65.14 v/krpm Kt: 5.51 lb-in/amp Torque (lb-in) Speed RPM Efficiency 0.0 0 4.0 100 8.0 200 12.0 300 16.0 400 20.0 500 24.0 600 28.0 700 32.0 800 36.0 900 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com