Lisun Goniospectroradiometer with Moving Mirror can test luminaries rotating in the presscribed burning position and around the vertical axle and a reflecting mirror rotates around the horizontal axle, meanwhile, a synchronous axle will rotate toward the opposite direction synchronously.
This document describes the Lisun Electronics Inc. LSG-2000CCD Goniophotometric system for measuring the spatial luminous intensity distribution of luminaires. The system uses a rotating mirror and photometer to measure intensity across angles in both the horizontal and vertical planes. It provides precise measurements that meet international standards for characterizing properties such as luminous flux, beam angle, and color distribution of lighting products.
LSG-5000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 and EN13032-1 clause 6.1.1.3 goniophotometer type 4 requirements. The LSG-5000 is an automatic light distribution intensity 3D curve testing system for measuring light. The measuring distance is from 5m to 30m. It can measure all types of lighting sources, LED or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.
LSG-5000 CCD Moving Detector Goniophotometer is full meet LM-79 Clause 9.3.1 request. The tested lamp will keep burning position and be fixed, near field detector move together with the big mirror in a line, and the far field detector will move with the big mirror synchronously. The detector will always sense the light directly from the luminaries.
This document provides information about Lisun Electronics Inc., a manufacturer of lighting and electrical test instruments. It includes contact information for Lisun's global offices in Hong Kong, Shanghai, and Los Angeles. The document then describes Lisun's LSG-2000 Goniophotometer with Moving Mirror system for measuring the light distribution of luminaires. Key features and specifications of the system are listed, along with laboratory requirements and typical customers. Measurement principles, functions, and an example test report are also summarized.
LSG-2000 Goniophotometer with Rotating Mirror also called the Moving Mirror Goniophotometer. The LSG-2000 is an automatic light distribution intensity 3D curve testing system. The measuring distance is from 5m to 30m. It can measure all types of lighting sources, LED or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.
Test intensity distribution curve in 3D & export IES files for DiaLux. Applicated with Japanese motor, Angle Coder and Constant Temperature Class A Detector to keep high accuracy. Both B-Beta & C-Gamma test for all luminaires up to 1.4m and 40kg
The document provides information about the Lisun Electronics Inc. Moving Detector Goniophotometer (LSG-5000), including:
1. The LSG-5000 can precisely measure the spatial light distribution of luminaires and provides photometric test results.
2. It has components like a rotating console, moving mirror, and photometer that allow testing of luminaires from 0-360 degrees.
3. Test results include luminous intensity, efficiency, and distribution that meet various international standards.
High precision-rotation-luminaire-goniospectroradiometer世满 江
LSG-1800BCCD goniophotometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurement with facility for rotating the light source.
This document describes the Lisun Electronics Inc. LSG-2000CCD Goniophotometric system for measuring the spatial luminous intensity distribution of luminaires. The system uses a rotating mirror and photometer to measure intensity across angles in both the horizontal and vertical planes. It provides precise measurements that meet international standards for characterizing properties such as luminous flux, beam angle, and color distribution of lighting products.
LSG-5000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 and EN13032-1 clause 6.1.1.3 goniophotometer type 4 requirements. The LSG-5000 is an automatic light distribution intensity 3D curve testing system for measuring light. The measuring distance is from 5m to 30m. It can measure all types of lighting sources, LED or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.
LSG-5000 CCD Moving Detector Goniophotometer is full meet LM-79 Clause 9.3.1 request. The tested lamp will keep burning position and be fixed, near field detector move together with the big mirror in a line, and the far field detector will move with the big mirror synchronously. The detector will always sense the light directly from the luminaries.
This document provides information about Lisun Electronics Inc., a manufacturer of lighting and electrical test instruments. It includes contact information for Lisun's global offices in Hong Kong, Shanghai, and Los Angeles. The document then describes Lisun's LSG-2000 Goniophotometer with Moving Mirror system for measuring the light distribution of luminaires. Key features and specifications of the system are listed, along with laboratory requirements and typical customers. Measurement principles, functions, and an example test report are also summarized.
LSG-2000 Goniophotometer with Rotating Mirror also called the Moving Mirror Goniophotometer. The LSG-2000 is an automatic light distribution intensity 3D curve testing system. The measuring distance is from 5m to 30m. It can measure all types of lighting sources, LED or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.
Test intensity distribution curve in 3D & export IES files for DiaLux. Applicated with Japanese motor, Angle Coder and Constant Temperature Class A Detector to keep high accuracy. Both B-Beta & C-Gamma test for all luminaires up to 1.4m and 40kg
The document provides information about the Lisun Electronics Inc. Moving Detector Goniophotometer (LSG-5000), including:
1. The LSG-5000 can precisely measure the spatial light distribution of luminaires and provides photometric test results.
2. It has components like a rotating console, moving mirror, and photometer that allow testing of luminaires from 0-360 degrees.
3. Test results include luminous intensity, efficiency, and distribution that meet various international standards.
High precision-rotation-luminaire-goniospectroradiometer世满 江
LSG-1800BCCD goniophotometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurement with facility for rotating the light source.
LSG-5000 Moving Detector Goniophotometer is full meet LM-79 Clause 9.3.1 request. The tested lamp will keep burning position and be fixed, near field detector move together with the big mirror in a line, and the far field detector will move with the big mirror synchronously. The detector will always sense the light directly from the luminaries.
LSG-5000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 and EN13032-1 clause 6.1.1.3 goniophotometer type 4 requirements. The LSG-5000 is an automatic light distribution intensity 3D curve testing system for measuring light. The measuring distance is from 5m to 30m. It can measure all types of lighting sources, LED or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.
LSG-1800/LSG-1700 Goniophotometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1800 is an update version for LSG-1700, the LSG-1800 use a high accuracy Motor and precision angle coder which keeps high test accuracy. It is for industrial laboratory measurements the photometric data of luminaries such as LED luminaries, HID lamps, fluorescent lamps and so on.
LISUN Near field-type-c-goniophotometer LSG-1900B世满 江
LSG-1900B Goniophotometer is near field Type C automatic goniophotometric instrument for luminous intensity distribution measurement. The LSG-1900B uses a constant temperature detector. It is for industrial laboratory photometric data measurements of small luminaires, such as down light, bulb light, etc.
LPCE-2 is an Integrating Sphere Spectroradiometer LED Testing System for identifying the performance of single LEDs and LED lamps. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE127-1997, IES LM-79-08 and IES LM-80-08, it recommends to using an array spectroradiometer with integrating sphere to test SSL products. The LPCE-2 system is applied with a CCD Spectroradiometer (LMS-9000B or LMS-9000A) and worked with A molding integrating sphere with testing holder base function which will be more circle and the test results will be more accurate than the traditional integrating sphere.
The document discusses an ArenaVision 403 luminaire that incorporates a renewed MHN-SA lamp, enabling tool-free lamp replacement. It is suitable for a new MHN-SA 2000 W lamp, which provides up to 15% more light than a comparable 1800 W lamp while maintaining excellent color characteristics. The 2000 W lamp is available in two versions, one meeting high CTV requirements and one providing a pleasing, natural color rendering and atmosphere.
Amo incremental _length_encoder_catalogElectromate
The document provides information about AMO GmbH's incremental length measuring systems based on the AMOSIN inductive measuring principle. It includes details about non-guided and guided AMOSIN measuring systems. The non-guided systems use measuring scales that can be mounted with adhesive and are compatible with various miniature and integrated scanning heads. The guided systems use measuring rails and scanning heads enclosed in a guide.
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps and high voltage mercury lamps) and CCFL. The measured data meets the requirements of CIE, EN and LM-79 clause 9.1 for the measurement of photometry and colorimetry.
Line Lite own branded/made NAV 111 10-watt COB Sharop based retrofitMenno Rottenberg
The document provides test results and specifications for an LED lamp called the NAR111- 230 V / 12 V. It includes details on the lamp's light source, optics, electrical specifications, performance test results, and compliance with various dimmer switches. The lamp is designed for commercial and retail lighting applications and provides long life, low heat output, high color rendering, and energy savings compared to traditional lighting solutions. It comes with a 3-year limited warranty.
Lisun LSG-1950 is a CIE A-α goniophotometer. The photometer head keeps static and it faces to the sample under test while the sample is rotating around both horizontal axis and vertical axis.
The document provides information on smart off-grid lighting solutions from Illumient. It discusses various configuration and component options for single and dual solar pole lighting systems using steel or concrete poles. Key components include solar panels, batteries, smart controllers, and LED lights. The systems can be remotely monitored and controlled through Illumient's cloud-based software to optimize performance and reduce maintenance needs. Options include different pole styles, lights, batteries and adding motion detection sensors.
High Precision Goniophotometer for Automotive and Traffic Signal LampsLisun Group
It is a CIE A-α Goniophotometer and full meet GB, ECE, SAE, JIS, KS and FMVSS108. Test intensity distribution curve in 3D & export IES files for DiaLux. The test lamp can be max 35kg
Efore LED DRIVER Master Product portfolio 2016EFORE Group
DL is the product line made by a wide range of smart LED drivers, in constant current or constant voltage, standard or “tailor-made”, that provide always the right power to an LED module/ application
Lisun Electronics provides lighting test instruments including a moving detector goniospectroradiometer (LSG-5000CCD) for measuring the spatial luminous intensity distribution and other photometric parameters of luminaires. The LSG-5000CCD system rotates a luminaire and detects light with two moving mirrors and a detector to directly measure light from the luminaire. It can test in accordance with various lighting standards and export data for use in lighting design software.
Lisun Electronics provides a brochure describing their LSG-5000 Moving Detector Goniophotometer system for measuring the photometric properties of luminaires. The system includes a goniometric rotating console, photometer, software and various accessories. It is capable of measuring properties such as luminous intensity distribution, beam angles, efficiency and more in accordance with various international standards. The document provides details on system components, measurement principles, specifications, laboratory requirements and applications.
This document provides information about the Lisun Electronics Inc. Moving Mirror Goniospectroradiometer (LSG-2000CCD). It can measure the spatial luminous intensity distribution, color properties, and electrical parameters of luminaires. The LSG-2000CCD meets various international photometry standards and can export data in common lighting software formats. It is suitable for measuring floodlights, street lights, and interior lights.
this system is used to measure spatial luminous intensity distribution of luminaries for floodlight, street lighting and interior lighting, and other photometric parameters such as spatial iso-intensity curve, intensity distribution curve
High precision-rotation-luminaire-goniospectroradiometer世满 江
Lisun Electronics provides high-precision goniospectroradiometers for measuring the photometric properties of lighting fixtures. Their models include the LSG-1800XCCD, LSG-1800BCCD, and LSG-1700BCCD. The document provides details on the system configuration, working principle, functions, specifications, laboratory requirements, software, and applications of Lisun's goniospectroradiometer systems.
High precision-rotation-luminaire-goniospectroradiometer世满 江
LSG-1800BCCD Goniospectroradiometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1800BCCD can do the spatial CCT test when do the intensity distribution test. It is for industrial laboratory measurements the photometric data of luminaires such as LED luminaries, HID lamps, fluorescent lamps and so on.
High precision-rotation-luminaire-goniophotometer世满 江
This document provides information on Lisun Electronics Inc., including contact information for their global offices in Hong Kong, Shanghai, Los Angeles, and Hangzhou. It also summarizes the specifications and functions of Lisun's high precision rotation luminaire goniophotometers, including models LSG-1700B, LSG-1800B, and LSG-1800X. The goniophotometers are used to measure photometric parameters of luminaires like lighting distribution curves and luminaire efficiency.
LSG-5000 Moving Detector Goniophotometer is full meet LM-79 Clause 9.3.1 request. The tested lamp will keep burning position and be fixed, near field detector move together with the big mirror in a line, and the far field detector will move with the big mirror synchronously. The detector will always sense the light directly from the luminaries.
LSG-5000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 and EN13032-1 clause 6.1.1.3 goniophotometer type 4 requirements. The LSG-5000 is an automatic light distribution intensity 3D curve testing system for measuring light. The measuring distance is from 5m to 30m. It can measure all types of lighting sources, LED or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.
LSG-1800/LSG-1700 Goniophotometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1800 is an update version for LSG-1700, the LSG-1800 use a high accuracy Motor and precision angle coder which keeps high test accuracy. It is for industrial laboratory measurements the photometric data of luminaries such as LED luminaries, HID lamps, fluorescent lamps and so on.
LISUN Near field-type-c-goniophotometer LSG-1900B世满 江
LSG-1900B Goniophotometer is near field Type C automatic goniophotometric instrument for luminous intensity distribution measurement. The LSG-1900B uses a constant temperature detector. It is for industrial laboratory photometric data measurements of small luminaires, such as down light, bulb light, etc.
LPCE-2 is an Integrating Sphere Spectroradiometer LED Testing System for identifying the performance of single LEDs and LED lamps. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE127-1997, IES LM-79-08 and IES LM-80-08, it recommends to using an array spectroradiometer with integrating sphere to test SSL products. The LPCE-2 system is applied with a CCD Spectroradiometer (LMS-9000B or LMS-9000A) and worked with A molding integrating sphere with testing holder base function which will be more circle and the test results will be more accurate than the traditional integrating sphere.
The document discusses an ArenaVision 403 luminaire that incorporates a renewed MHN-SA lamp, enabling tool-free lamp replacement. It is suitable for a new MHN-SA 2000 W lamp, which provides up to 15% more light than a comparable 1800 W lamp while maintaining excellent color characteristics. The 2000 W lamp is available in two versions, one meeting high CTV requirements and one providing a pleasing, natural color rendering and atmosphere.
Amo incremental _length_encoder_catalogElectromate
The document provides information about AMO GmbH's incremental length measuring systems based on the AMOSIN inductive measuring principle. It includes details about non-guided and guided AMOSIN measuring systems. The non-guided systems use measuring scales that can be mounted with adhesive and are compatible with various miniature and integrated scanning heads. The guided systems use measuring rails and scanning heads enclosed in a guide.
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps and high voltage mercury lamps) and CCFL. The measured data meets the requirements of CIE, EN and LM-79 clause 9.1 for the measurement of photometry and colorimetry.
Line Lite own branded/made NAV 111 10-watt COB Sharop based retrofitMenno Rottenberg
The document provides test results and specifications for an LED lamp called the NAR111- 230 V / 12 V. It includes details on the lamp's light source, optics, electrical specifications, performance test results, and compliance with various dimmer switches. The lamp is designed for commercial and retail lighting applications and provides long life, low heat output, high color rendering, and energy savings compared to traditional lighting solutions. It comes with a 3-year limited warranty.
Lisun LSG-1950 is a CIE A-α goniophotometer. The photometer head keeps static and it faces to the sample under test while the sample is rotating around both horizontal axis and vertical axis.
The document provides information on smart off-grid lighting solutions from Illumient. It discusses various configuration and component options for single and dual solar pole lighting systems using steel or concrete poles. Key components include solar panels, batteries, smart controllers, and LED lights. The systems can be remotely monitored and controlled through Illumient's cloud-based software to optimize performance and reduce maintenance needs. Options include different pole styles, lights, batteries and adding motion detection sensors.
High Precision Goniophotometer for Automotive and Traffic Signal LampsLisun Group
It is a CIE A-α Goniophotometer and full meet GB, ECE, SAE, JIS, KS and FMVSS108. Test intensity distribution curve in 3D & export IES files for DiaLux. The test lamp can be max 35kg
Efore LED DRIVER Master Product portfolio 2016EFORE Group
DL is the product line made by a wide range of smart LED drivers, in constant current or constant voltage, standard or “tailor-made”, that provide always the right power to an LED module/ application
Lisun Electronics provides lighting test instruments including a moving detector goniospectroradiometer (LSG-5000CCD) for measuring the spatial luminous intensity distribution and other photometric parameters of luminaires. The LSG-5000CCD system rotates a luminaire and detects light with two moving mirrors and a detector to directly measure light from the luminaire. It can test in accordance with various lighting standards and export data for use in lighting design software.
Lisun Electronics provides a brochure describing their LSG-5000 Moving Detector Goniophotometer system for measuring the photometric properties of luminaires. The system includes a goniometric rotating console, photometer, software and various accessories. It is capable of measuring properties such as luminous intensity distribution, beam angles, efficiency and more in accordance with various international standards. The document provides details on system components, measurement principles, specifications, laboratory requirements and applications.
This document provides information about the Lisun Electronics Inc. Moving Mirror Goniospectroradiometer (LSG-2000CCD). It can measure the spatial luminous intensity distribution, color properties, and electrical parameters of luminaires. The LSG-2000CCD meets various international photometry standards and can export data in common lighting software formats. It is suitable for measuring floodlights, street lights, and interior lights.
this system is used to measure spatial luminous intensity distribution of luminaries for floodlight, street lighting and interior lighting, and other photometric parameters such as spatial iso-intensity curve, intensity distribution curve
High precision-rotation-luminaire-goniospectroradiometer世满 江
Lisun Electronics provides high-precision goniospectroradiometers for measuring the photometric properties of lighting fixtures. Their models include the LSG-1800XCCD, LSG-1800BCCD, and LSG-1700BCCD. The document provides details on the system configuration, working principle, functions, specifications, laboratory requirements, software, and applications of Lisun's goniospectroradiometer systems.
High precision-rotation-luminaire-goniospectroradiometer世满 江
LSG-1800BCCD Goniospectroradiometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1800BCCD can do the spatial CCT test when do the intensity distribution test. It is for industrial laboratory measurements the photometric data of luminaires such as LED luminaries, HID lamps, fluorescent lamps and so on.
High precision-rotation-luminaire-goniophotometer世满 江
This document provides information on Lisun Electronics Inc., including contact information for their global offices in Hong Kong, Shanghai, Los Angeles, and Hangzhou. It also summarizes the specifications and functions of Lisun's high precision rotation luminaire goniophotometers, including models LSG-1700B, LSG-1800B, and LSG-1800X. The goniophotometers are used to measure photometric parameters of luminaires like lighting distribution curves and luminaire efficiency.
Rotation Luminaire GoniospectroradiometerLisun Group
Test Spatial CCT and intensity distribution curve in 3D & export IES files for DiaLux. Applicated with Taiwan motor, Angle Coder and Constant Temperature Class A Detector to keep high accuracy. B-Beta & C-Gamma test for all lamps up to 1.6m and 40kg
Rotation Luminaire Goniophotometer (Big Size)Lisun Group
This document provides information about Lisun Electronics Inc.'s high precision rotation luminaire goniophotometer (LSG-17.800B). It includes details about the system configuration, working principle, functions, specifications, laboratory requirements, typical customers, design standards, and application software. The system allows precise measurement of photometric parameters for lighting fixtures and meets various industry standards.
LSG-1800CCD/LSG-1700CCD Goniospectroradiometer is an automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1800CCD can do the spatial CCT test when do the intensity distribution test. It is for industrial laboratory measurements the photometric data of luminaires such as LED luminaries, HID lamps, fluorescent lamps and so on.
The document provides information on the Lisun Electronics Inc. LSG-3000 Moving Detector Goniophotometer system for measuring the spatial distribution of luminous intensity of luminaires. The system meets various industry standards and can test luminaires such as floodlights, street lights, and interior lights. It provides measurement of photometric properties such as luminous intensity, illuminance, luminance, beam angles, and luminous flux.
LSG-3000 Moving Detector Goniophotometer is full meet LM-79 Clause 9.3.1 request. The tested lamp will keep burning position and be fixed, near field detector move together with the big mirror in a line, and the far field detector will move with the big mirror synchronously. The detector will always sense the light directly from the luminaries.
LSG-3000 CCD Moving Detector Goniophotometer is full meet LM-79 Clause 9.3.1 request. The tested lamp will keep burning position and be fixed, near field detector move together with the big mirror in a line, and the far field detector will move with the big mirror synchronously. The detector will always sense the light directly from the luminaries.
The document is a brochure for Lisun Electronics Inc. that provides information about their LSG-3000CCD Moving Detector Goniospectroradiometer system. It includes specifications for the system such as measurement capabilities, accuracy standards, and laboratory requirements. It also lists contact information for Lisun Electronics' global offices and describes features of the system like measurement principles and data output formats.
This document provides information on the Lisun Electronics Inc. LSG-3000CCD Moving Detector Goniospectroradiometer. It includes details on the system configuration, measurement principles, functions, specifications, laboratory requirements, services provided, design standards, typical customers, and application software. The system is designed to measure the spatial luminous intensity distribution and other photometric parameters of luminaires according to various industry standards.
LISUN High precision-rotation-luminaire-goniophotometer LSG-1800B世满 江
The document provides information about Lisun Electronics Inc., a manufacturer of lighting test instruments including high precision goniophotometers. It describes the key features and specifications of three goniophotometer models - the LSG-1800X, LSG-1800B, and LSG-1700B. The goniophotometers are designed to measure photometric parameters of various luminaires, meeting various industry standards. They can accurately measure light intensity distribution and other optical properties to support lighting design and quality control.
Full meet LM-79 Clause 9.3.1, GB, CIE & IEC Standards. Test intensity distribution curve in 3D & export IES files for DiaLux. It can test all kinds of luminaires which length up to dia=0.6m and max 20kg
This document provides information on Lisun Electronics Inc., including contact information for their global offices in Hong Kong, Shanghai, and Los Angeles. It also describes Lisun's Near Field Type C Goniophotometer (LSG-1900B) and provides specifications and test results for the device. The goniophotometer is used to measure the photometric parameters of luminaires, such as spatial intensity distribution curves.
LSG-1900B Goniophotometer is high precision auto matic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1900B use a constant temperature detector Japanese Motor which keeps high test accuracy. It is for industrial laboratory measurements the photometric data of luminaires.
Similar to Goniospectroradiometer with-moving-mirror (20)
This document provides information about the Xenon lamp aging test Chamber (XD-80LS) produced by Lisun Electronics Inc. It includes contact information for Lisun's global offices, a description of the chamber's components and capabilities, such as its ability to control temperature, humidity, and simulate sunlight. Specifications of the chamber such as its size, temperature and humidity ranges, and power requirements are also listed.
Lisun Electronics Inc. is a leader in lighting and electrical test instruments with global offices in Hong Kong, Shanghai, Los Angeles, and Hangzhou. The document describes Lisun's Water Pressure Test Apparatus (WPD-A) which is used to pressure test water storage type water heaters in compliance with IEC60335/GB4706.12 standards. The WPD-A features a 900L water storage tank, temperature control from 5-85°C, pressure testing up to 2.5MPa controlled automatically via PLC and interface. It includes stainless steel and aluminum construction, power and control systems, flow and pressure sensors, and touch screen interface.
The document is a brochure for the UV-263LS UV aging test chamber manufactured by Lisun Electronics Inc. It describes the features and specifications of the chamber, which is designed to evaluate how materials hold up under simulated sunlight and other weather conditions. Key details include its internal dimensions, temperature and humidity ranges, UV lamp specifications, sample holder sizes, and automatic controls for temperature, lighting, condensation, and spraying cycles. Safety devices and features of the heating, humidity, and temperature control systems are also outlined.
The document is a brochure for the JL-UL UL Water Spray Test Device produced by Lisun Electronics Inc. It describes the device as testing electrical and electronic products under simulated rainy conditions according to UL standards. The device consists of three nozzles above and one nozzle below to test for UL rain and 45-degree sprinkler conditions. It provides specifications such as dimensions, adjustable height range, number of nozzles, flow rates, and pressure requirements.
This brochure describes the Thermal Resistance & Spectroradiometer System for LED (TRS-1000) from Lisun Electronics Inc. The TRS-1000 allows for integrated testing of optical, color, electrical, and thermal parameters of LEDs. It monitors parameters like junction temperature, thermal resistance, chromaticity, and luminous flux in real-time as temperature is varied from 5-90°C. The system configuration includes an LED spectroradiometer, thermal and electrical performance analyzer, temperature control device, standard light source, and integrating sphere.
Lisun Electronics Inc. is a leader in lighting and electrical test instruments. The document provides information on test corners, which are used for temperature rise testing. It lists the technical specifications of the test corners including dimensions, thermocouple details, temperature measuring points, and materials. Basic configuration and installation/operation instructions are also included.
Lisun Electronics produces a line of spectrophotometers under the HSCD series for measuring color. The brochure provides contact and location information for Lisun's global offices and factories. It also summarizes the key features and technical specifications of the HSCD spectrophotometer models, including their measurement capabilities, sensors, color indicators, repeatability, and optional accessories.
This document is a brochure for Lisun Electronics Inc. that describes their line of spectral colorimeters. It provides contact and location information for Lisun's global offices in Hong Kong, Shanghai, and Los Angeles. The brochure then describes the technical specifications and features of four models of spectral colorimeters - SCD-380, SCD-385, SCD-386, and SCD-388. It provides details on their illumination sources, sensors, measurement capabilities, data storage and display options, and other technical details.
Lisun Electronics provides a full suite of lighting test instruments including a scientific grade CCD spectroradiometer, integrating spheres, power supplies, and software. The document describes the company's spectroradiometer, optical fibers, power supplies, power meters, AC power sources, integrating spheres, standard lamp sources, and cabinet options for creating a complete LED testing system.
Lisun Electronics Inc. is a leader in lighting and electrical test instruments with global offices in Hong Kong, Shanghai, Los Angeles, and Hangzhou. The document describes Lisun's Energy Dispersive X-ray Fluorescence Spectrometer (EDX-2) which can detect and analyze over 75 chemical elements and fully meet the RoHS testing requirements to restrict pollution from electronic waste. The 6-page brochure provides specifications, installation instructions, operating procedures, and an example test report for the EDX-2.
This document is a brochure for Lisun Electronics Inc. that provides information about their portable CCD spectroradiometer product line. It lists contact information for their global offices in Hong Kong, Shanghai, and Los Angeles. It then describes the key features and specifications of their LMS-6000 series of devices that can measure parameters like illuminance, color temperature, chromaticity coordinates, and spectral distributions. It provides example interface screenshots and an example test report output.
This document provides information about Lisun Electronics Inc., a leader in lighting and electrical test instruments. It includes contact information for Lisun Group's global offices in Hong Kong, Shanghai, Los Angeles, and Hangzhou. The second page describes the CHL-5LED Phosphor Relative Brightness Tester, which tests the phosphor relative brightness and forward voltage of LED light sources. It lists the tester's specifications, working principles, and provides a diagram of the testing process.
Lisun Electronics Inc. is a leader in lighting and electrical test instruments with global offices in Hong Kong, Shanghai, Los Angeles, and Hangzhou. The brochure describes the Oxygen Bomb (YD-KD) aging tester, which tests wire, cable, rubber, and polymer materials under pressure and temperature conditions in oxygen or compressed air. The Oxygen Bomb has a maximum working pressure of 4.0MPa, safety blasting pressure of 2.7-3.3MPa, temperature range of 0-200°C, and tank volume of 4000cm3. It meets the testing requirements of IEC60335-1.
Lisun Electronics provides an optical radiation safety test system that measures the safety of lighting and electrical devices according to international standards. The system includes a spectroradiometer, retinal radiance meter, motorized goniometer, calibration sources, and software. It tests for hazards like UV exposure, blue light, and thermal radiation from 200-3000nm. The system identifies maximum exposures and classifies products' safety levels.
The brochure describes Lisun Electronics Inc., a leader in lighting and electrical test instruments, and their UV Lamp Test System which uses a high precision UV spectroradiometer, dark testing case, and other accessories to test the spectrum, radiant power, efficiency, color rendering index, correlated color temperature, and electric parameters of UV lamps. The system provides testing of UV lamps' spectral power distribution, radiant irradiance, peak wavelength, half bandwidth, UVA, UVB, and UVC output as well as the lamp's voltage, current, power, and power factor. An example test report is also included showing results for a sample
Lisun Electronics produces LED power driver test instruments including the WT2080. The WT2080 can measure input/output characteristics of LED drivers including voltage, current, power, power factor, harmonics, and startup characteristics. It tests according to industry standards and is used with other Lisun test equipment. The document provides details on the WT2080 specifications, functions, and an example test report showing results from testing an LED driver.
The document is a test report from Lisun Electronics evaluating the lumen maintenance and color stability of white LED samples from OSRAM Lighting over 6,000 hours of operation. Key findings include:
- The samples maintained over 96% of their initial lumen output after 6,000 hours and were predicted to reach L70 and L50 ratings of over 33,000 hours based on TM-21 projections.
- Chromaticity shift was small, within a du'v' range of -0.0001 to 0.0018 over the test period.
- No sample failures occurred and performance was stable under the test conditions of 55°C case temperature and 6,000 hour duration.
Lisun Electronics Inc. is a leader in lighting and electrical test instruments with offices in Hong Kong, Shanghai, Los Angeles, and Hangzhou. The document advertises Lisun's LED Driver Online Tester models LEDLS-60 and LEDLS-12 which can test LED driver input and output parameters on production lines. The LEDLS-60 has 10 channels to test 60 parameters at once while the LEDLS-12 can test 12 parameters at once. Both models provide quick testing within 20 seconds for the LEDLS-60 and 2 seconds for the LEDLS-12.
This document describes the LED Driver Aging Rack (LEDRACK-100W192P) from Lisun Electronics Inc. The rack can test up to 192 LED driver products simultaneously based on standards like IEC62384 and GB24825-2009. It includes the aging rack, control system, and LED load modules. The aging rack is over 20 feet long and can accommodate different driver output interfaces. The control system software allows setting test parameters and monitoring results in real-time.
This document provides information on Lisun Electronics' line of lighting test instruments, including a CCD spectroradiometer, integrating spheres, power meters, and other accessories. It lists the company's locations and contact information and then describes each product's specifications and applications for testing LED luminaires and single LEDs according to industry standards. The line includes systems for measuring light intensity, spectrum, color, and electrical characteristics of lighting products.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!SOFTTECHHUB
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...Zilliz
Join us to introduce Milvus Lite, a vector database that can run on notebooks and laptops, share the same API with Milvus, and integrate with every popular GenAI framework. This webinar is perfect for developers seeking easy-to-use, well-integrated vector databases for their GenAI apps.
Building RAG with self-deployed Milvus vector database and Snowpark Container...Zilliz
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 6
Goniospectroradiometer with-moving-mirror
1. Brochure
Global Office of Lisun Electronics Inc.
http://www.Lisungroup.com
Lisun Group (Hong Kong) Limited
Add: Room 803, Chevalier House, 45-51 Chatham Road South, Tsim Sha Tsui, KL, HK
Tel: 00852-68852050 Fax: 00852-30785638
Email: SalesHK@Lisungroup.com
Lisun Electronics (Shanghai) Co., Ltd
Add: 113-114, No. 1 Building, Nanxiang Zhidi Industry Park, No. 1101, Huyi Road, Jiading
District, Shanghai, 201802, China
Tel: +86(21)5108 3341 Fax: +86(21)5108 3342
Email: SalesSH@Lisungroup.com
Lisun Electronics Inc. (USA)
Add: 445 S. Figueroa Street, Los Angeless, CA 90071, U.S.A.
Email: Sales@Lisungroup.com
Lisun China Factory
Add: NO. 37, Xiangyuan Road, Hangzhou City, Zhejiang Province, China
Tel: +86-189-1799-6096
Email: Engineering@Lisungroup.com
Leader in Lighting & Electrical Test Instruments
Rev. 1/16/2020
Goniospectroradiometer with
Moving Mirror
(LSG-2000CCD)
2. Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com
-Page 1 -
1.System Configuration
A. LSG-2000CCD Goniophotometric System:
Goniometric Rotating Console: Japanese Mitsubishi Motor and German
Angle encoder System to keep the test accuracy.
High Reflective Moving Mirror: Special design and produced to keep high
reflective value.
Goniometric Rotating Control Instrument in 19inch cabinet: It connects
to the PC and was controlled by the software.
Goniometric Rotating Control Instrument in dark room: This can allow
the customer to control the rotating in the dark room when install the
lumainires but no need to control in the PC.
Double Channel & High Precision Photometer
Germany produced Class L Constant Temperature Photo Detector
Cross-beam Laser System for Calibrating
English Measuring Software
Automatic Adjust Diaphragm: remote control to adjust the size of
diaphragm for the different diameter size luminaries test
Two sets of luminaries Clamps: multi-functions
Oversea Delivery and Packing: all of the instruments and accessories will
be packed with Fumigation free three plywood, include the delivery cost
to Shanghai sea port
B. SLS-150W DC Standard Light Intensity Lamp
C. LS2010 Digital Power Meter: High Accuracy to measure AC and DC voltage,
current, power and power factor, also measure harmonic
D. DC3010 CC & CV DC Power Source: DC3010 output is 30V/10A, Option can
be DC6010 (output is 60V/10A) and DC12010 (output is 120V/10A)
E. LSP-1KVAR AC Power Source: 1KVA Pure Sine Wave AC Power Source
F. CASE-19IN 19inch Standard Instruments Cabinet
G. LMS-9000B High Precision CCD Spectraidomeeter
H. CLAMP-9000 Accessories and Adjustable Tripod for LMS-9000B
Full View for LSG-2000CCD Goniospectroradiometer with Moving Mirror
Note: PC and Printer prepared by the customer (request at least one USB port)
3. Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com
-Page 2 -
2. Measurement Principle
Goniospectroradiometer with Moving Mirror (also called Goniospectroradiometer
with Rotating Mirror) can test luminaries rotating in the prescribed burning position
and around the vertical axle and a reflecting mirror rotates around the horizontal
axle, meanwhile, a synchronous axle will rotate toward the opposite direction
synchronously. The photometer head located at a fixed position of the limiting
photometric distance in front of the reflecting mirror to gather the light in each
direction.
The rotation priority is determined by the software. If mirror axle is took precedence
of rotation, the goniospectroradiometer will continuously measure the luminous
intensity at each γ angle on a vertical plane determined by the C angle, the
measuring trace is equivalent to the longitude. Similarly, while the luminaries axle is
priority, the system will continuously measure the luminous intensity at each C
angle on a conical surface determined by the γ angle, the trace can be looked upon
the woof. See the following figure.
Measurement Principle
3. System Functions
LSG-2000CCD Goniospectroradiometer with Moving Mirror
4. Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com
-Page 3 -
The LSG-2000CCD fully meets LM-79 Clause 9.3.1, CIE and GB standards for
Goniophotometric of luminaries, this system is used to measure spatial luminous
intensity distribution of luminaries for floodlight, street lighting and interior lighting,
and other photometric parameters such as spatial iso-intensity curve, intensity
distribution curve of each section (shown in rectangular coordinate system or polar
coordinate system), iso-illuminance distribution curve, luminance limitation curve,
luminaries efficiency, glare grade, effective beam angles, upward luminous flux ratio,
downward luminous flux ratio, total luminous flux, effective luminous flux,
utilization factor and electric parameters (wattage, power factor, voltage and
current) of luminaries etc.
LSG-2000CCD Can test all of the above luminaires
4. Specifications
1) The tested luminaire rotates around the mirror with an angle of (γ)±180°(or
0-360°) and the tested luminaire rotates around itself with an angle of
(C)±180°(or 0-360°)
2) The accuracy of angle: 0.05° Resolution of angle: 0.001°
3) Luminosity Testing Range: Illuminance 0.001lx~99,999lx; Light Intensity
1.0cd~107
cd(detector)
4) Accuracy of photometry: Germany produced constant temperature photo
detector DIN5032-6/CIE pub1. No. 69 Class L
5) Testing Accuracy: 2%(Under Standard lamp); Stray Light: less than 0.1%
6) Work with high accuracy and quick CCD Spectroradiometer to measure
spatial color parameters.
7) Accuracy of chromaticity coordinate: ±0.0015 or ±0.0005(under standard A
lamp)
8) Spectral Wavelength Range: 380nm ~780nm; Accuracy of wavelength:
±0.5nm
9) English version software can run in Win7, Win8 or Win10
5. Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com
-Page 4 -
5. Laboratory Requirements
1) Room Requirements according to CIE
Model Dark Room (W*H*L) Operation Room(W*L)
LSG-2000BCCD 5*6*8~30m 4*4m
LSG-2000CCD 4*5*8~30m 4*4m
LSG-2000SCCD 4*4.2*8~30m 4*4m
The dark room wall, ceiling and floor should be all coated with dull black paint or
be covered by black cloth and black carpet.
Air-conditioner: be set in the dark room to control the temperature around
lamps to the standard value upon the CIE requirements.
Note: LISUN GROUP engineer dept will submit the Lab Design support documents
according to the customer’s real lab size after the formal purchase order was
confirmed
Model Number
LSG-2000BCCD
(Big Size)
LSG-2000CCD
(Standard Size)
LSG-2000SCCD
(Small Size)
Measure Size (mm) Diameter=1600 Diameter=1400 Diameter=1000
Measure Weight (Kg) 50 40 30
Measure Power(W) 600V/10A, AC/DC 600V/10A,AC/DC 600V/10A,AC/DC
6. Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com
-Page 5 -
Fig: LSG-2000CCD lab dark room view
2) Requirements of Eliminating the stray Light
Luminaires must be where the photodetector can only receive the light
reflected by the rotating mirror in the LSG-2000CCD system. The light
given off directly by the luminaries and reflected by the wall and floor is
warded off by the light fence. Internal surface of the dark room and dark
path together with the surface of the light fence should be painted
unpolished black or be covered by black cloth and black carpet.
3) Temperature of the Environment
Temperature around the lamp or luminaries must be 25℃±1℃ during the test.
Exceptions can be given according to relative lamps as following.
a. Tungsten Incandescent Lamp: 25℃±5℃
b. Double-caps Fluorescent Lamp: 25℃±1℃
c. High Pressure Mercury Lamp: 25℃±2℃
d. Metal Halogen Lamp: 25℃±2℃
7. Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com
-Page 6 -
e. High Pressure Sodium Lamp: 25℃±2℃
f. Low Pressure Sodium Lamp: 25℃±2
4) Airflow
Airflow may be induced by natural aeration, air conditioner or movement of the
luminaries in the goniophotometer, but the speed of the airflow couldn’t
exceed 0.2m/s.
5) Vibration and shock
When the lamp is in lighting, the vibration couldn’t exceed 10m/s2(4 ~
3000Hz), or the moving scope of the lamp couldn’t exceed 30mm (at most
4Hz)
6) Smoke, Dust and Moisture
The test environment must free from smoke, dust or moisture. At the same
time, even not during the measurement, smoke, dust or moisture will also
influence the reflectance of the reflecting mirror and induce more stray light.
So, the test room must be kept clean, no smoke and dry. The humidity should
be less than 60% RH.
6. Service
1) Installation and Training
LISUN GROUP engineers will take responsibility for installation and Training of
the system at the customer’s
2) Period of Guarantee: 24 months
The service is for free except technician’s travel payment if the service
provided by LISUN GROUP implement at the customer’s.
3) Upgrading the applications software for free
7. Design Standard of Device
The construction, technical parameter, test & operate steps as well as data
processing software of LSG-2000CCD Goniospectroradiometer with Moving Mirror
meet the following requirements:
3.1 CIE Pub. NO.70,”The Measurement of Absolute Luminous Intensity
Distributions”
3.2 CIE DIV.Ⅱ-TC10,”Photometry of Luminaires”
3.3 IES LM-35-1989,”IES Approved Method for Photometric Testing of
Floodlights”
3.4 IES LM-31,”IES Approved Method for Photometric Testing of Roadway
Luminaires”
3.5 IES-LM-79, “Electrical & Photometric Measurements of Solid-State Lighting Products”
3.6 GB/T 7002-1986,“Luminosity Test of Flood Luminaires”
3.7 GB/T 9467-1988, “Luminosity Test of Indoor Luminaires”
8. Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com
-Page 7 -
3.8 GB/T 9468-1988, “Luminosity Test of Street Luminaires”
3.9 IES 61341 “Method of Measurement of Center Beam Intensity and Beam
Angle(s) of Reflector Lamp”
3.10 CIE Pub.NO.76, “Photometry-the CIE System of Physical Photometry”
8. Typical oversea market customers:
There are many world famous company and lab institute choose Lisun
Goniophtometer, Please get the reference customers’ information from Lisun
Group Oversea Sales Dept.
9. Application Software
This system can export data files as following formats:
This kind of format files can be transferred by other illumination and luminaire
design software such as DiaLux
Application software can also implement essential calculation for lighting design as
iso-illuminance distribution curve on a working plane, luminance limitation curve,
luminaire efficiency, effective beam angle, upward luminous flux ratio, downward
luminous flux ratio, effective luminous flux, utilization factor curve etc.
The Next Page is the Test Report by the software:
9. Lisun Electronics Inc.
http://www.Lisungroup.com
Tel:+86(21)51083341
Fax:+86(21)51083342 Page 1 of 27 Pages
Report No.: LS1711 Test Time: 8/28/2017 17:02
Luminaire Property
Luminaire Manufacturer: LISUN
Luminaire Category: LED Philips 112 Luminaire Description: LS-71-83-8077
Lamp Catalog: LUMINUS Lamp Description: LUMINUS001
Number of Lamps: 1 Lumens per Lamp: 550
Luminous Length (mm): 50 Luminous Width (mm): 50
Luminous Height (mm): 100 Voltage: 119.9 V
Current: 0.530 A Power: 63.55 W
Power Factor: 0.999
Photometric Results
CIE Class: Direct Total Rated Lamp Lumens: 550.0 lm
Measurement Flux: 539.5 lm Efficiency: 98.08%
Downward Ratio: 98.08% Upward Ratio: 0.00%
Horizontal Diffuse Angle(50%): H99.2
Vertical Diffuse Angle(50%): V101.5
Luminaire Efficacy Rating (LER): 8.54 Central Intensity: 417.76 cd/klm
Max. Intensity: 429.28 cd/klm Pos of Max. Intensity: H45 V8
S/MH(C0/C180): 1.14 S/MH(C90/C270): 1.13
Picture Of Luminaire Luminous Intensity Distribution Curve
0
180
9090
1010
170170
2020
160160
3030
150150
4040
140140
5050
130130
6060
120120
7070
110110
8080
100100
536
429
321
214
107
Average Diffuse Angle(50%): 100.1°
C0-C180 C90-C270
Unit: cd/klm
C Plane (°):0.0-360.0: 45.0 Gamma Plane (°):0.0-90.0:1.0
Test Lab: LISUN Test Device: LSG-2000CCD
Test Type: TYPE C Distance: 8.000 m
Temperature: 24.5° Humidity: 60%
Operator: Jacky Inspector:
10. Lisun Electronics Inc.
http://www.Lisungroup.com
Tel:+86(21)51083341
Fax:+86(21)51083342 Page 2 of 27 Pages
Luminous Intensity Distribution Curve
0
180
9090
1010
170170
2020
160160
3030
150150
4040
140140
5050
130130
6060
120120
7070
110110
8080
100100
536
429
321
214
107
-180 -120 -60 0 60 120 180
0
107
214
321
429
536
C0-C180 C90-C270 Unit: cd/klm
C Plane (°):0.0-360.0: 45.0 Gamma Plane (°):0.0-90.0:1.0
Test Lab: LISUN Test Device: LSG-2000CCD
Test Type: TYPE C Distance: 8.000 m
Temperature: 24.5° Humidity: 60%
Operator: Jacky Inspector:
11. Lisun Electronics Inc.
http://www.Lisungroup.com
Tel:+86(21)51083341
Fax:+86(21)51083342 Page 3 of 27 Pages
Luminous Intensity Distribution Curve(cd/klm)
0
180
9090
1010
170170
2020
160160
3030
150150
4040
140140
5050
130130
6060
120120
7070
110110
8080
100100
536
429
321
214
107
cd/klm
C0-C180
C90-C270
η=98.08%
LUMINUS/LUMINUS001
C Plane (°):0.0-360.0: 45.0 Gamma Plane (°):0.0-90.0:1.0
Test Lab: LISUN Test Device: LSG-2000CCD
Test Type: TYPE C Distance: 8.000 m
Temperature: 24.5° Humidity: 60%
Operator: Jacky Inspector:
32. Lisun Electronics Inc.
http://www.Lisungroup.com
Tel:+86(21)51083341
Fax:+86(21)51083342 Page 24 of 27 Pages
Color Properties
Average Color Nonuniformity:∆u'=-0.2642,∆v'=-0.5294,∆u'v'=0.591689
Maximum Color Nonuniformity:∆u'=-0.0004,∆v'=0.0002,∆u'v'=0.000418
Average Color(u',v'):(0.2643,0.5294)Color Distribution Datas: (u',v')
GC 0.0 90.0 180.0 270.0
0.0 0.2642,0.5294 0.2642,0.5294 0.2642,0.5294 0.2642,0.5294
30.0 0.2644,0.5294 0.2639,0.5296 0.2643,0.5294 0.2646,0.5293
C Plane (°):0.0-360.0: 45.0 Gamma Plane (°):0.0-90.0:1.0
Test Lab: LISUN Test Device: LSG-2000CCD
Test Type: TYPE C Distance: 8.000 m
Temperature: 24.5° Humidity: 60%
Operator: Jacky Inspector: