Gemcore Industrial Resources provides design, manufacturing, installation, rehabilitation, commissioning, and consultancy services for air pollution control equipment, material handling equipment, and other industrial equipment and structures. It aims to support clients' needs through innovative, safe, and high-quality solutions while promoting energy conservation and a healthy environment. Some of Gemcore's accomplished projects include dust collectors, heat exchangers, conveying systems, and structural works for cement plants and other industrial facilities.
Circuits, LLC is a privately held manufacturer of flexible and rigid-flex printed circuit boards founded in 2008. They have 12 industry professionals with over 150 years of combined experience, and manufacture boards in their 50,000 square foot facility using environmentally friendly processes. Their capabilities include producing boards with up to 14 layers at sizes up to 22x16 inches with trace and spacing of 0.003 inches, and they specialize in medical, defense, and industrial applications.
Kingspan Solar Commercial Design GuidelinesKingspanSolar
This document provides technical design guidance for installing commercial solar thermal systems. It discusses considerations for sizing and installing solar collectors, designing the solar circuit piping layout, integrating frost protection, preventing stagnation, selecting appropriate pump stations and safety components, sizing solar loading modules and fresh water modules, and commissioning the control system. The guidance emphasizes following recommendations for proper system design and installation while allowing for installer discretion in final designs.
Premier Tech Aqua is quite excited to meet with you and present its offer in answer to the significant changes of the Ontario Building Code that came into effect last January 1, 2017. Fully certified CAN/BNQ, Ecoflo Biofilter now integrates coco chips in its organic filtering media and offers 2 options, demand and time-dosed to provide more design flexibility, both at a highly competitive pricing. Ecoflo Biofilter remains as simple as ever to design and install and ensures a performance that exceeds the new requirements.
Topics of Discussion:
- New CAN/BNQ Regulations and impact on our industry
- New Ecoflo Biofilter – the most ecological and simple septic system of the industry
- Maintenance Update
- Nitrogen reducing option
- Phosphorus removal option
Kojis Global Nigeria Limited is an engineering, construction, and consulting firm established in 2005. The document provides an overview of Kojis' areas of operation, including electrical, instrumentation, telecommunications, mechanical, and civil projects. It also lists some example projects Kojis has completed for clients like Mobil Producing Nigeria Unlimited, Agip Oil Company, and NAOC/Agip Global Maintenance, focusing on electrical installation and maintenance work.
This document provides guidance on selecting and designing fiberglass piping systems. It discusses preliminary pipe sizing based on flow rate and pipe diameter. For detailed sizing, it describes methods to calculate pressure loss due to fluid friction and fittings using equations like Darcy-Weisbach that factor in parameters like pipe roughness, diameter, fluid properties and velocity. It also discusses flow regimes like laminar, turbulent and transitional, and how to determine friction factors using Colebrook or other equations based on the Reynolds number.
The document provides a summary of Bhavishya Sehgal's industrial placement report at Parkinson-Spencer Refractories Limited (PSR). It describes PSR as a private limited company that manufactures refractories and engineered systems for the glass industry. It discusses Bhavishya's involvement in two key projects - assisting with the installation of a PSR system in Japan and setting up an actuator test rig. It also includes a summary of Bhavishya's proposed final year engineering report for PSR.
This document discusses zero bacteria ball and butterfly valves. It covers materials and compositions used, common applications, definitions, comparisons to other valves, and technical specifications. Standard materials include 316L stainless steel with strict composition limits. Common applications are in biopharma, food/beverage, and other industries requiring sanitary valves. Surface finishes like mechanical and electro-polishing are discussed which reduce roughness and improve corrosion resistance.
Alexander Jose Ramirez Cairo is an experienced electronic engineer and project manager with over 23 years of experience in the oil and petrochemical industries. He has led numerous commissioning projects and currently serves as the Commissioning Leader for Petrocedeno, overseeing pre-commissioning, commissioning, start-up, and project execution. He has extensive training in areas such as project management, instrumentation, safety systems, and maintenance.
Circuits, LLC is a privately held manufacturer of flexible and rigid-flex printed circuit boards founded in 2008. They have 12 industry professionals with over 150 years of combined experience, and manufacture boards in their 50,000 square foot facility using environmentally friendly processes. Their capabilities include producing boards with up to 14 layers at sizes up to 22x16 inches with trace and spacing of 0.003 inches, and they specialize in medical, defense, and industrial applications.
Kingspan Solar Commercial Design GuidelinesKingspanSolar
This document provides technical design guidance for installing commercial solar thermal systems. It discusses considerations for sizing and installing solar collectors, designing the solar circuit piping layout, integrating frost protection, preventing stagnation, selecting appropriate pump stations and safety components, sizing solar loading modules and fresh water modules, and commissioning the control system. The guidance emphasizes following recommendations for proper system design and installation while allowing for installer discretion in final designs.
Premier Tech Aqua is quite excited to meet with you and present its offer in answer to the significant changes of the Ontario Building Code that came into effect last January 1, 2017. Fully certified CAN/BNQ, Ecoflo Biofilter now integrates coco chips in its organic filtering media and offers 2 options, demand and time-dosed to provide more design flexibility, both at a highly competitive pricing. Ecoflo Biofilter remains as simple as ever to design and install and ensures a performance that exceeds the new requirements.
Topics of Discussion:
- New CAN/BNQ Regulations and impact on our industry
- New Ecoflo Biofilter – the most ecological and simple septic system of the industry
- Maintenance Update
- Nitrogen reducing option
- Phosphorus removal option
Kojis Global Nigeria Limited is an engineering, construction, and consulting firm established in 2005. The document provides an overview of Kojis' areas of operation, including electrical, instrumentation, telecommunications, mechanical, and civil projects. It also lists some example projects Kojis has completed for clients like Mobil Producing Nigeria Unlimited, Agip Oil Company, and NAOC/Agip Global Maintenance, focusing on electrical installation and maintenance work.
This document provides guidance on selecting and designing fiberglass piping systems. It discusses preliminary pipe sizing based on flow rate and pipe diameter. For detailed sizing, it describes methods to calculate pressure loss due to fluid friction and fittings using equations like Darcy-Weisbach that factor in parameters like pipe roughness, diameter, fluid properties and velocity. It also discusses flow regimes like laminar, turbulent and transitional, and how to determine friction factors using Colebrook or other equations based on the Reynolds number.
The document provides a summary of Bhavishya Sehgal's industrial placement report at Parkinson-Spencer Refractories Limited (PSR). It describes PSR as a private limited company that manufactures refractories and engineered systems for the glass industry. It discusses Bhavishya's involvement in two key projects - assisting with the installation of a PSR system in Japan and setting up an actuator test rig. It also includes a summary of Bhavishya's proposed final year engineering report for PSR.
This document discusses zero bacteria ball and butterfly valves. It covers materials and compositions used, common applications, definitions, comparisons to other valves, and technical specifications. Standard materials include 316L stainless steel with strict composition limits. Common applications are in biopharma, food/beverage, and other industries requiring sanitary valves. Surface finishes like mechanical and electro-polishing are discussed which reduce roughness and improve corrosion resistance.
Alexander Jose Ramirez Cairo is an experienced electronic engineer and project manager with over 23 years of experience in the oil and petrochemical industries. He has led numerous commissioning projects and currently serves as the Commissioning Leader for Petrocedeno, overseeing pre-commissioning, commissioning, start-up, and project execution. He has extensive training in areas such as project management, instrumentation, safety systems, and maintenance.
SBEE Cables (India) Limited is a professionally managed company located in Bangalore, India that manufactures a complete range of low voltage wires and cables. It has ISO 9001-2000 certification. The company was incorporated in 1979 and initially manufactured components for lighting before switching to wires and cables in 1995. It now specializes in building wires, flexible industrial cables, and other cable types.
This document provides information on TMC Co., Ltd's halogen free and mud resistant offshore cables that are compliant with various industry standards. It includes details on cable constructions for high voltage power cables with voltages ranging from 3.6/6kV to 8.7/15kV. Tables provide specifications for different cable types and sizes, listing information like conductor size, insulation thickness, armor wire diameter, nominal diameter and weight. The document also outlines the company's history and certifications obtained for its marine cable products.
This document provides information on cable tray wiring systems, including safety benefits, dependability, space savings, and cost savings compared to conduit wiring systems. It discusses how cable tray systems improve safety by not providing a path for transmission of gases like conduits can. Cable tray systems also provide dependable wiring, space savings over conduit runs requiring large footprints, and cost savings in design, materials, installation and maintenance. The document is a manual on cable tray systems based on National Electrical Code requirements.
ALL-WELD Company Limited is a specialist in custom metal fabrication and machining with two plants located in Scarborough, Ontario. They have expertise in fabricating pressure vessels, heat exchangers, autoclaves, and process equipment for industries such as petrochemical, biofuel, environmental, and hydrometallurgy. ALL-WELD has over 100 employees and 83 years of experience in the industry.
This document summarizes a presentation given at the 2007 Sucker Rod Pumping Workshop about Weatherford's Rotaflex pumping units. The presentation discussed a Rotaflex 1150 unit with a 366 inch stroke length and 50,000 lb PPRL rating. It provided production charts showing the unit can pump from 2500 to 11500 feet. It also described the unit's mechanical reversal mechanism, counterbalance system, and other features. The document concluded by discussing installations of Rotaflex units at Cimarex Energy wells and presenting actual production results.
The document provides an overview of the in.xm spa pack platform from Pentair. It highlights several innovative features of the in.xm including its waterproof enclosure, breakthrough connectors, kinetic heat monitoring system, dry-fire protection, board access prevention design, and intelligent water temperature algorithm. The in.xm is described as the safest and most reliable spa pack platform for manufacturers.
Technical Bulletin 1128A Mechanical Insulation In Typical Refrigeration Appli...Joe Hughes
As operating temperatures of mechanical equipment and piping systems drop, increased diligence must be exercised to optimize the insulation system’s performance and mitigate risks of future deterioration. When specifying and installing an insulation system for pipes or equipment operating at refrigerant temperatures (e.g. -70°F to 32°F) cutting corners or rationalizing compromises is imprudent since the operating costs and risks far outweigh any reduced capital costs; and it is important to note that the best systems are typically not the most expensive systems.
The document discusses innovative ideas for light modules for floating production storage and offloading (FPSO) vessels and floating liquefied natural gas (FLNG) projects. It outlines the current status of FPSO and FLNG projects, challenges in developing FLNG projects, and benefits and pitfalls of modularization. The presentation also provides examples of modularization case studies and innovative ideas to develop lighter modules using discipline engineering.
The document provides information on products and services from EST Group for heat exchanger testing, plugging, and repair. It describes hydrostatic test plugs, pumps, and tools for plugging and testing heat exchanger tubes. It also outlines field services for tube inspection, cleaning, sleeving, and retubing of heat exchangers.
Technical Bulletin 1128A Mechanical Insulation In Typical Refrigeration Appli...Dyplast Products
The document discusses key considerations for selecting insulation materials for refrigeration applications. It states that thermal conductivity (k-factor) and water vapor transmission (WVT) are the most important properties to consider, as they significantly impact energy costs and system performance over the life of the insulation. Polyisocyanurate insulation has the best combination of k-factor and WVT compared to other common insulants like extruded polystyrene and fiberglass. While capital costs are a factor, prioritizing k-factor and WVT will reduce operating costs and risks of failure in the long run.
This document summarizes the services provided by Elica TechLab, an accredited testing laboratory. It offers a variety of testing services to ensure product safety, reliability, and performance, including safety testing according to international standards, EMC testing, reliability testing, packaging testing, and testing of materials. It aims to support customers in developing products that meet requirements for worldwide markets. The laboratory has a number of accreditations and is a member of several standards committees.
Catalog thiết bị đóng cắt Fuji Electric - 02- Manual Motor Starter
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
This document outlines the step-by-step acquisition management process for construction sector projects. It describes the key processes of acquisition planning, purchase requests, proposals and quotations, purchase performance, administration, and closing. Metrics like the Acquisition Performance Index are used to measure performance against targets. The major steps include detailed specification in requests, equalizing supplier quotations, negotiating requirements, and establishing governance over the processes to ensure purchases flow according to business needs.
This document provides instructions for installing, operating, and maintaining the National Oilwell 2500 Supreme pump. It contains warnings about safety, lists the pump components, and describes procedures for lubrication, start-up, operation, and routine maintenance. The pump is designed to improve performance through features like a wear pad casing, superior bearings, and stainless steel components.
We were quick enough to design Polymeric housed ZNO Surge Arrestors using technologies. These metal oxide Gapless Surge Arrestors have been designed, developed & manufactured in Compliance to International standard IEC 60099-4 & Indian standard IS: 3070 (Part 3). We manufacture metal oxide gapless surge arrestors/protection device using the most modern technology of highly non liner Zinc Oxide Varistor blocks & thus diverts natural lighting surge & switching surge to earth & simultaneously clip off any follow on current.
E-mail:- sales@compaqinternational.com , heatshrink@sify.com
This document provides guidance on engineering and piping design for Fiber Glass Systems fiberglass reinforced piping systems. It discusses product selection and applications, preliminary and detailed pipe sizing methods for liquid and gas flow, designing above ground piping systems using supports, anchors and guides, addressing temperature effects through thermal expansion analysis and flexibility design, considerations for pipe burial, and other design factors. Standard specifications and approvals for fiberglass piping systems are also covered.
This document provides an engineering and piping design guide for fiberglass reinforced piping systems from Fiber Glass Systems. It discusses selecting fiberglass piping products based on the application characteristics like media corrosivity, operating temperatures and pressures. It also covers topics like pipe sizing, above ground system design using supports and anchors, addressing temperature effects, pipe burial, and other considerations like abrasion resistance, low temperatures, bending and valves. It includes tables, formulas and specifications to help with piping system design using fiberglass materials.
This document provides guidelines for safely installing and operating Cambium PTP 600 series radio equipment in hazardous locations. It specifies the allowed operating envelope, part numbers and product labels, installation and operating requirements, and instructions for installing integrated and connectorized units. Special attention must be paid to limiting radio frequency emissions to prevent explosions.
The document provides safety guidelines for installing and operating Cambium PTP 600 Series radio products in hazardous locations. Key points include:
- The maximum Effective Isotropic Radiated Power (EIRP) is limited based on the gas group in the location.
- Only products with ATEX/Hazloc labels can be used in hazardous areas.
- Integrated antennas have pre-set power limits; external antennas require ensuring limits are not exceeded.
- Indoor units like the PIDU must be located in safe areas away from hazards.
- Proper certification labels must be present and limitations in installation manuals followed.
The document provides guidance on safely installing and operating Cambium PTP 600 Series radio products in hazardous locations. Key points include:
- The products are certified for use in ATEX Zone 2 and NEC Class 1 Division 2 areas with specific EIRP limits depending on the gas group.
- Only models with the correct certification labels can be used. Integrated units have preset power limits.
- External antennas require ensuring limits are not exceeded. The indoor PIDU and accessories are not certified for hazardous areas.
- Installation must meet ATEX/NEC standards and not exceed radio regulatory or hazardous location EIRP limits for the frequency band and region.
1. The document advertises the ROP-PFW pre-fabricated wall system patented by Ricardo Palma in 2011 for constructing houses, row houses, townhouses, and condominiums more quickly and at lower cost than traditional methods.
2. The system uses locally available materials and does not require a factory, special equipment, or highly skilled labor. Wall panels are constructed on-site and allow for maximized space utilization.
3. ROP Construction Inc. was founded in 1980 and has used the ROP-PFW system to construct mass housing developments in several Philippine regions. The system and company have been approved and accredited by various government agencies.
SBEE Cables (India) Limited is a professionally managed company located in Bangalore, India that manufactures a complete range of low voltage wires and cables. It has ISO 9001-2000 certification. The company was incorporated in 1979 and initially manufactured components for lighting before switching to wires and cables in 1995. It now specializes in building wires, flexible industrial cables, and other cable types.
This document provides information on TMC Co., Ltd's halogen free and mud resistant offshore cables that are compliant with various industry standards. It includes details on cable constructions for high voltage power cables with voltages ranging from 3.6/6kV to 8.7/15kV. Tables provide specifications for different cable types and sizes, listing information like conductor size, insulation thickness, armor wire diameter, nominal diameter and weight. The document also outlines the company's history and certifications obtained for its marine cable products.
This document provides information on cable tray wiring systems, including safety benefits, dependability, space savings, and cost savings compared to conduit wiring systems. It discusses how cable tray systems improve safety by not providing a path for transmission of gases like conduits can. Cable tray systems also provide dependable wiring, space savings over conduit runs requiring large footprints, and cost savings in design, materials, installation and maintenance. The document is a manual on cable tray systems based on National Electrical Code requirements.
ALL-WELD Company Limited is a specialist in custom metal fabrication and machining with two plants located in Scarborough, Ontario. They have expertise in fabricating pressure vessels, heat exchangers, autoclaves, and process equipment for industries such as petrochemical, biofuel, environmental, and hydrometallurgy. ALL-WELD has over 100 employees and 83 years of experience in the industry.
This document summarizes a presentation given at the 2007 Sucker Rod Pumping Workshop about Weatherford's Rotaflex pumping units. The presentation discussed a Rotaflex 1150 unit with a 366 inch stroke length and 50,000 lb PPRL rating. It provided production charts showing the unit can pump from 2500 to 11500 feet. It also described the unit's mechanical reversal mechanism, counterbalance system, and other features. The document concluded by discussing installations of Rotaflex units at Cimarex Energy wells and presenting actual production results.
The document provides an overview of the in.xm spa pack platform from Pentair. It highlights several innovative features of the in.xm including its waterproof enclosure, breakthrough connectors, kinetic heat monitoring system, dry-fire protection, board access prevention design, and intelligent water temperature algorithm. The in.xm is described as the safest and most reliable spa pack platform for manufacturers.
Technical Bulletin 1128A Mechanical Insulation In Typical Refrigeration Appli...Joe Hughes
As operating temperatures of mechanical equipment and piping systems drop, increased diligence must be exercised to optimize the insulation system’s performance and mitigate risks of future deterioration. When specifying and installing an insulation system for pipes or equipment operating at refrigerant temperatures (e.g. -70°F to 32°F) cutting corners or rationalizing compromises is imprudent since the operating costs and risks far outweigh any reduced capital costs; and it is important to note that the best systems are typically not the most expensive systems.
The document discusses innovative ideas for light modules for floating production storage and offloading (FPSO) vessels and floating liquefied natural gas (FLNG) projects. It outlines the current status of FPSO and FLNG projects, challenges in developing FLNG projects, and benefits and pitfalls of modularization. The presentation also provides examples of modularization case studies and innovative ideas to develop lighter modules using discipline engineering.
The document provides information on products and services from EST Group for heat exchanger testing, plugging, and repair. It describes hydrostatic test plugs, pumps, and tools for plugging and testing heat exchanger tubes. It also outlines field services for tube inspection, cleaning, sleeving, and retubing of heat exchangers.
Technical Bulletin 1128A Mechanical Insulation In Typical Refrigeration Appli...Dyplast Products
The document discusses key considerations for selecting insulation materials for refrigeration applications. It states that thermal conductivity (k-factor) and water vapor transmission (WVT) are the most important properties to consider, as they significantly impact energy costs and system performance over the life of the insulation. Polyisocyanurate insulation has the best combination of k-factor and WVT compared to other common insulants like extruded polystyrene and fiberglass. While capital costs are a factor, prioritizing k-factor and WVT will reduce operating costs and risks of failure in the long run.
This document summarizes the services provided by Elica TechLab, an accredited testing laboratory. It offers a variety of testing services to ensure product safety, reliability, and performance, including safety testing according to international standards, EMC testing, reliability testing, packaging testing, and testing of materials. It aims to support customers in developing products that meet requirements for worldwide markets. The laboratory has a number of accreditations and is a member of several standards committees.
Catalog thiết bị đóng cắt Fuji Electric - 02- Manual Motor Starter
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
This document outlines the step-by-step acquisition management process for construction sector projects. It describes the key processes of acquisition planning, purchase requests, proposals and quotations, purchase performance, administration, and closing. Metrics like the Acquisition Performance Index are used to measure performance against targets. The major steps include detailed specification in requests, equalizing supplier quotations, negotiating requirements, and establishing governance over the processes to ensure purchases flow according to business needs.
This document provides instructions for installing, operating, and maintaining the National Oilwell 2500 Supreme pump. It contains warnings about safety, lists the pump components, and describes procedures for lubrication, start-up, operation, and routine maintenance. The pump is designed to improve performance through features like a wear pad casing, superior bearings, and stainless steel components.
We were quick enough to design Polymeric housed ZNO Surge Arrestors using technologies. These metal oxide Gapless Surge Arrestors have been designed, developed & manufactured in Compliance to International standard IEC 60099-4 & Indian standard IS: 3070 (Part 3). We manufacture metal oxide gapless surge arrestors/protection device using the most modern technology of highly non liner Zinc Oxide Varistor blocks & thus diverts natural lighting surge & switching surge to earth & simultaneously clip off any follow on current.
E-mail:- sales@compaqinternational.com , heatshrink@sify.com
This document provides guidance on engineering and piping design for Fiber Glass Systems fiberglass reinforced piping systems. It discusses product selection and applications, preliminary and detailed pipe sizing methods for liquid and gas flow, designing above ground piping systems using supports, anchors and guides, addressing temperature effects through thermal expansion analysis and flexibility design, considerations for pipe burial, and other design factors. Standard specifications and approvals for fiberglass piping systems are also covered.
This document provides an engineering and piping design guide for fiberglass reinforced piping systems from Fiber Glass Systems. It discusses selecting fiberglass piping products based on the application characteristics like media corrosivity, operating temperatures and pressures. It also covers topics like pipe sizing, above ground system design using supports and anchors, addressing temperature effects, pipe burial, and other considerations like abrasion resistance, low temperatures, bending and valves. It includes tables, formulas and specifications to help with piping system design using fiberglass materials.
This document provides guidelines for safely installing and operating Cambium PTP 600 series radio equipment in hazardous locations. It specifies the allowed operating envelope, part numbers and product labels, installation and operating requirements, and instructions for installing integrated and connectorized units. Special attention must be paid to limiting radio frequency emissions to prevent explosions.
The document provides safety guidelines for installing and operating Cambium PTP 600 Series radio products in hazardous locations. Key points include:
- The maximum Effective Isotropic Radiated Power (EIRP) is limited based on the gas group in the location.
- Only products with ATEX/Hazloc labels can be used in hazardous areas.
- Integrated antennas have pre-set power limits; external antennas require ensuring limits are not exceeded.
- Indoor units like the PIDU must be located in safe areas away from hazards.
- Proper certification labels must be present and limitations in installation manuals followed.
The document provides guidance on safely installing and operating Cambium PTP 600 Series radio products in hazardous locations. Key points include:
- The products are certified for use in ATEX Zone 2 and NEC Class 1 Division 2 areas with specific EIRP limits depending on the gas group.
- Only models with the correct certification labels can be used. Integrated units have preset power limits.
- External antennas require ensuring limits are not exceeded. The indoor PIDU and accessories are not certified for hazardous areas.
- Installation must meet ATEX/NEC standards and not exceed radio regulatory or hazardous location EIRP limits for the frequency band and region.
1. The document advertises the ROP-PFW pre-fabricated wall system patented by Ricardo Palma in 2011 for constructing houses, row houses, townhouses, and condominiums more quickly and at lower cost than traditional methods.
2. The system uses locally available materials and does not require a factory, special equipment, or highly skilled labor. Wall panels are constructed on-site and allow for maximized space utilization.
3. ROP Construction Inc. was founded in 1980 and has used the ROP-PFW system to construct mass housing developments in several Philippine regions. The system and company have been approved and accredited by various government agencies.
Freires theory real cause of tsunami & climate changeenmoredo
The document discusses a scientific theory that massive underground injection of seawater into oil wells to extract more fossil fuels is altering the bulk density and rotational balance of the Earth. This is causing planetary pole shifts and is the likely cause of earthquakes and tsunamis like the 2011 Tohoku earthquake and tsunami in Japan. The proposed solution is to develop water as a clean, renewable fuel by efficiently splitting water molecules into hydrogen and oxygen gases and burning the hydrogen. Developing technologies that run on water as fuel could help address issues of poverty and prevent further human-caused disasters from pole shifts.
AIRFLOW is a ridge roll product that has air vents to release hot air trapped in the ceiling, helping cool homes. It won third prize in a 1996 invention contest. Hot air rises, so the vents at the top of the roof allow hot air to escape, lowering interior temperatures without active systems like air conditioning.
1. The document outlines a corporate plan called "Development with Equity Role in God's Plan (corporate plan 7)" created by the Global Association of Consumers Inc.
2. The plan discusses four pillars of life - spiritual, family, material, and social - with God as the foundation. It addresses how different corporate plans map to each pillar.
3. The plan proposes building churches and classrooms as a service to God, and includes initial designs for churches in barangays and towns. It encourages realizing this plan to love and serve God.
The document presents a corporate plan by the Global Association of Consumers Inc to provide knowledge and tools to promote development with equity. It aims to disseminate knowledge through seminars and workshops while also providing facilities and venues to apply this knowledge. The plan includes training modules on various topics to increase incomes and opportunities. It aims to duplicate these efforts to reach more people and promote entrepreneurship for economic development.
ROP Construction provides a tilt-up concrete wall system called ROP Wall System that is stronger, more optimized structurally, and lighter than traditional concrete hollow block walls. ROP walls are cast-in-place solid concrete walls that are 2-1/4 to 2-3/4 inches thick and can be load bearing up to 2,500 psi. They incorporate an embedded truss system to directly transfer loads to columns, making the building structure stronger yet more economical to construct.
The document describes a plan by the Global Association of Consumers Inc. (GACI) to implement a revolutionary concept of selling real estate with a return of payment. The concept was copyrighted in 2004 by Dick Palma. GACI's plan is to partner with real estate developers, property owners, and pre-need companies to sell properties through GACI members, offering a return of the purchase amount to buyers. The plan outlines marketing and training steps to promote sales through GACI's membership network and commissions/incentives for its marketing organization.
The document proposes establishing a Global Consumers Business Club to empower consumers and address their predicament of only spending money but not sharing in business profits. It would unite consumers to avail of discounts, benefits, and factory prices by purchasing in bulk. The club would create a non-government organization called the Global Association of Consumers Inc. to set up a management company, cooperatives, and convenient stores to operate the club and address common causes of cooperative failures like lack of capital and management issues. The goal is to develop entrepreneurship opportunities for members and promote consumer education.
The document describes several inventions and products from One Globalvision Technologies, including the PARMAC ELECTRO SAVER for electricity savings, the ROWEN FIRE EXTINGUISHER, OMEGA 21 products that use energy principles, an INCA BIODIESEL BREWER, and more. It provides details on the features and benefits of some of the products, and backgrounds on members of the board of directors and inventors involved with the company.
The document presents a plan called "Development with Equity" that aims to redistribute wealth through an innovative cooperative model involving convenient stores, cooperatives, buyers clubs, and a management company. The plan targets marginalized groups and aims to address inequities in the current system by improving access to markets and ensuring fairness. Key aspects include members investing in and earning income from stores and cooperatives, stores operating with tax exemptions, and a management team implementing the plan through franchises. Expected short-term outputs include expanding stores and setting up centralized purchasing, as well as training programs to strengthen partnerships.
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Project Management Semester Long Project - Acuityjpupo2018
Acuity is an innovative learning app designed to transform the way you engage with knowledge. Powered by AI technology, Acuity takes complex topics and distills them into concise, interactive summaries that are easy to read & understand. Whether you're exploring the depths of quantum mechanics or seeking insight into historical events, Acuity provides the key information you need without the burden of lengthy texts.
Ocean lotus Threat actors project by John Sitima 2024 (1).pptxSitimaJohn
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Generating privacy-protected synthetic data using Secludy and MilvusZilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
1. GEMCORE INDUSTRIAL RESOURCES
Manila: GEMCORE, Ligtasan, San Roque, Antipolo City ® Cebu: Inoburan, City of Naga
Tel. Nos.: (02) 489 0824; (02) 409 6986; (0908) 885 8086; (0932) 866 0050; (032) 489 4570; Fax: (02) 630 2786
e–mail : gemcore2000@yahoo.com & gemcore@gmail.com
Website: http://www.gemcore.biz
Original Equipment Manufacturer’s
Association of the Philippines
PRODUCTS & SERVICES :
DESIGN, MANUFACTURE / FABRICATION, INSTALLATION,
REHABILITATION,
REHABILITATION COMMISSIONING AND CONSULTANCY:
CONSULTANCY
* AIR POLLUTION CONTROL :
- ELECTROSTATIC PRECIPITATORS ;
- BAG FILTERS (Jet Pulse Type, etc.) ;
- HOT GAS FILTERS (Ceramic) ;
- VACUUM FILTERS (Mobile/Stationary) ;
- SCRUBBERS & CYCLONES, etc.
* MATERIAL HANDLING :
- SCREW CONVEYORS ;
- BUCKET ELEVATORS ;
- BELT/CHAIN CONVEYORS ;
- PNEUMATIC CONVEYORS ;
- ROTARY AIR-LOCK VALVES ;
- DOUBLE TIPPING VALVES ;
- BUTTERFLY VALVES,
- EXP’N / VIBRATION
JOINTS, etc.
* EXPLOSION RELIEF DOORS :
* HEAT EXCHANGERS / COOLERS :
* PIPING/DUCTING & VENT’N :
*ASPHALT, FUEL & WATER TANKS :
* STORAGE SILO & BINS:
* CYLINDERS & VESSELS :
* STRUCTURAL WORKS :
* REFRIGERATION & A / C :
GEMCORE: DOES IT BETTER !!! and Supports …….. “ENERGY CONSERVATION, SAFE & HEALTHY ENVIRONMENT”
2. To be among the few catalyst in achieving
global competitiveness of the Philippine Equipment
Manufacturers,
and be at par with the world’s best
in providing products and/or services i. e.,
services, i e
innovations, technical expertise, and solution.
To satisfy client’s requirement
on needed products and/or services
services,
by performing & accomplishing it
in the safest way possible without
sacrificing quality,
to attain their equipment reliability and
efficient plant operation, while promoting energy
conservation, maintain safe working condition and
healthy environment.
SOME OF ACCOMPLISHED PROJECTS, AMONG OTHERS :
NO. PROJECT DESCRIPTION CLIENT AMOUNT NO. PROJECT DESCRIPTION CLIENT AMOUNT
1.0 BITUMEN TANK for Asphalt Plant Linnhoff, Singapore 650,000.00 31.0 CAGE MILL SHAFTING AND FLANGES PHILPHOS – FEMC 430,000.00
2.0 Mini-DUST COLLECTORS (3 pcs.) BCCI - UCC 1,177,000.00 32.0 MIRRLEES GENSET VENTILATION FAN SCC – CEMEX 885,500.00
3.0 DUST COLLECTION SYSTEM (Bag Type), etc. LGMC- 3,789,280.00 33.0 F M 3 & 4 UPGRADING (DUST COLLECTOR) FCC – BHA U.S. $
HEIDELBERGER 124,000.00
4.0 Assorted DUST COLLECTOR PARTS, etc. BHA of USA U.S. $ 34.0 F M 3 & 4 (DUCTING & STRUCTURES) FCC 4,200,000.00
162,800.00
5.0 DUST COLLECTOR STRUCTURE & Ducting James Hardie – Verz 1,850,000.00 35.0 KILN SECTION BAGFILTERS REHAB. FCC - LAFARGE 338,500.00
6.0 CYCLONES & STRUCTURES DPFSI 1,100,500.00 36.0 HEAT EXCHANGERS / GAS COOLERS PUYAT STEEL 400,000.00
7.0 CHECK UP E. P. (Pre-heater & Cooler) Solid Cement 990,300.00 37.0 REPLACEMNT OF KILN BEARING FRCC – LAFARGE 145,000.00
8.0 INST’N OF CEMENT WITHDRAWAL EQUIP. FR Cement 1,522,500.00 38.0 COAL PLANT WALL DEMOLITION FRCC – LAFARGE 450,000.00
9.0 REBUILD OF E. P. FOR FSFE PASAR - BHA U.S.$ 39.0 DUCTING FOR FUMES REJECTION HONDA – VERZA 635,000.00
247,500.00
10.0 TANK AND HOPPERS & INSTALLATION First Solid - BRAC 1,600,000.00 40.0 SHUT DOWN WORKS @ BATANGAS FCC 820,000.00
11.0 PACKHOUSE DUST COLLECTOR RCCI 3,900,000.00 41.0 PLANT SECTION MAINTENANCE @ TERESA FRCC 780,000.00
12.0 REHAB. OF ASPHALT PLANT Socor Construction 1,466,000.00 42.0 FINISH MILL DUST COLLECTOR 865 CMM TCPI 4,680,000.00
13.0 CONVEYING WITH Mini-DUST COLLECTOR San Rafael 788,000.00 43.0 SAW DUST PNEUMATIC CONVEYING TOWA 800,000.00
14.0 DUST COLLECTOR FOR SILO 8-14 FR Cement 3,514,500.00 44.0 REHAB. OF EXISTING BAGFILTER TOWA 400,000.00
15.0 CEMENT STORAGE BIN FOR PACKHOUSE 3 FR Cement 4,050,000.00 45.0 SHUT DOWN WORKS @ TERESA FRCC 590,000.00
16.0 FOUNDATION FOR CEMENT BIN FR Cement 4,320,000.00 46.0 BAGFILTER DUST COLLECTOR & PNEUMATICF TOWA 3,600,000.00
17.0
17 0 PACKHOUSE EQUIP FOR PASIG PLANT
EQUIP. FR Cement 9,048,600.00
9 048 600 00 47.0
47 0
18.0 E. P. COOLER, PRE-HEATER & SCRUBBER/TOWER FR Cement 30,340,000.00 48.0
19.0 DUST COLLECTOR @ CLINKER/GYPSUM ELEV. RCCI 1,400,000.00 49.0
20.0 DUST COLLECTOR FOR BULK LOADING Solid Cement 1,100,000.00 50.0
21.0 DUST COLLECTORS @ MILL FEEDING SYSTEM RCCI 5,280,000.00
22.0 DUST COLLECTOR @ SUBIC CEMENT TERMINAL BCCI - UCC 2,430,890.00
23.0 DUST COLLECTOR @ GenSan CEMENT TERMINAL DUCC 2,310,000.00
24.0 DUST COLLECTOR @ ILO-ILO TERMINAL DUCC 2,310,000.00
25.0 DUST COLLECTOR @ CEBU TERMINAL DUCC 1,980,000.00
26.0 CYC.&HT EXCHANGERS (Ammonia, Glycol, etc) PHIPHOS/ABI/GE 2.090,000.00
27.0 E.P. COOLER CHAMBER 1 RHABILITATION FRCC – LAFARGE 2,100,000.00
28.0 CONVERSION OF SILO DUST COLLECTOR FCC - BHA U.S.$ 6,800.00
29.0 DUST COLLECTOR PARTS (LOCAL PORTION) DUNLOP - BHA 370,000.00
30.0 FINTUBES HEAT EXCHANGERS PHILPHOS – FEMC 1,200,000.00
21.0 DUST COLLECTORS @ MILL FEEDING SYSTEM RCCI 5,280,000.00
3. ALLIED SERVICES :
REHABILITATION, UPGRADING/INNOVATION,
INSTALLATION AND MAINTENANCE :
* CRUSHING / MILLING SYSTEM;
* PYRO-PROCESSING EQUIPMENT;
* ALL TYPES OF AIR POLLUTION CONTROL
(E. S. P., BAG FILTERS, ETC.);
* COAL & OTHER FUEL BURNING SYSTEM;
* ALL TYPES OF CONVEYING SYSTEM;
* AIR BLASTERS;
* ASPHALT BATCHING PLANT ;
* PACKING/BLENDING SYSTEM ;
* AGGREGATE PLANT ;
* MARINE SERVICES ;
* CASTING CRACKS REPAIR ;
4. TOOLS / EQUIPMENT :
A.) ERECTION / MOBILE
ITEM D E S C R I P T I O N QTY.
1.0 Telescopic Truck Mounted Crane (KATO) 36 T 2 Units
2.0 Isuzu Forward with Crane (UNIC) 3.5 T 1 Units
3.0 Isuzu Ten Wheeler Truck 1 Units
4.0 Isuzu Elf (Red) 1 Units
5.0 Isuzu Forward (Blue) 1 Units
6.0 Forklift Komatsu (3 Tonner) 3 Units
7.0 Mini Backhoe with Dozer 1 Units
8.0 Tamaraw Close Van 1 Units
9.0 Isuzu Tamaraw XLT 1 Units
10.0 Tamaraw Jitney 1 Units
11.0 Toyota Ford Fiera 1 Units
12.0 Air Compressor Engine Driven (125 CFM) 1 Units
13.0 Air Compressor Engine Driven (175 CFM) 1 Units
14.0 Jack Hammers 8 Units
15.0 Concrete Mixer 1 Units
B.) FABRICATION & MACHINING
1.0 Milling Machines 2 Units
2.0 Shaper / Planer 1 Units
3.0 Lathe Machines 3 Units
4.0 Threading Machine 1 Units
5.0 Power Press 1 Units
6.0 Roller Bending Machine 2 Units
7.0 Shearing Machine 2 Units
8.0 Post Drill 3 Units
9.0 Power Hacksaw 1 Units
10.0 Cable Puller (TIRFOR) 3 Tons 2 Units
11.0 O / A Automatic Cutter 2 Units
12.0 Chain Winch 1 Units
13.0 Cable Winch 4 Units
14.0 Centrifugal Pumps (Mitsubishi / Superline) 18 Units
15.0 Electric Air Compressors 5 Units
16.0 Magnetic Drill 2 Units
17.0 O / A Cutting Outfit 23 Units
18.0
18 0 Pipe Threader 3 Units
19.0 Portable Angle Grinders ( 4” ) 14 Units
20.0 Portable Angle Grinders ( 7” ) 8 Units
21.0 Cut – Off Grinder ( 14” ) 7 Units
22.0 Chain Block 15 Units
23.0 Lever Block 12 Units
24.0 Bench Grinder 6 Units
25.0 Bench Vise 7 Units
26.0 Ramset Fastener 2 Units
27.0 Theodolite (SOKKISHA) 1 Units
28.0 Welding Transformer (SMAW) 58 Units
29.0 Welding Machine (M I G) 3 Units
30.0 Welding Machine (T I G) 2 Units