Digilogic Systems Frequency Response Analyzer offers a comprehensive solution for analyzing system response to sinusoidal inputs across varying frequencies. Its non-intrusive Swept Sine Frequency Response Analysis method ensures accurate and true-value results, crucial for assessing stability and performance characteristics. The analyzer's simultaneous measurement in both time and frequency domains, coupled with its user-friendly software, enables fast, efficient, and creative analysis. One of its key strengths lies in its compact size and portability, making it ideal for field use without compromising on scalability or channel expansion. 

1. Page 1 of 6
Introduction:
Frequency response analyzer is a critical tool in evaluating control systems. It
involves the application of a range of pure sinusoidal inputs with different
frequencies (or frequency components) and the study of the output response
characteristics as a function of the input signal frequencies. The advantages of this
method are in its ability to determine the stability and give information about the
behaviour of systems at frequencies diverse from the standard DC level. Just like
gain and phase response analysis helps in identifying the problems and solutions,
this frequency analysis allows for striking out the effective problems as well as begins
to indicate the solutions by proposing the optimum gain/phase plot as shown below.
This analytical approach helps planning and optimising various contexts of control
system in electronics, automotive, defence, and aerospace industries.
Frequency Response Analyzer

2. Page 2 of 6
What is the Frequency Response Analyzer?
Frequency Response Analyzer is a special instrument commonly used in
designing and testing of devices or systems to determine their gain and phase
response relative to fluctuations of frequency. It employs a frequency swept sine
wave signal as an input to the device under test and then demodulates and analyzes
the output. The Frequency response analyzer accurately calculates the amplitude and
the phase shift of the output in respect to the swept range frequencies.
This analysis also proves useful in predicting its behaviour at different frequencies
of operation to allow assessment of its steadiness, efficiency and its dynamism.
Performing frequency sweep tests enables the determination of effects of using
components, like control systems, amplifiers, filters, sensors etc., which work
distinctly based on the frequency response analyzer measurements.
How does the Digilogic Systems Frequency Response Analyzer
work?
Digilogic Systems Frequency Response Analyzer is incorporated with signal
processing and analysis methods to obtain amplitude and phase response of a
system, based on the specified frequencies. It involves accurately introducing specific
sinusoidal inputs and tracking the system’s response, which offers a wealth of
information concerning its performance under different operating conditions.
Frequency response analyzer of Digilogic Systems works in cooperation with all the
system or device under test by feeding it with a frequency swept sine wave. This
oscilloscope is capable of displaying a swept sine wave form, which is valuable since
it is able to sweep across the range of frequencies that is often important. As the sine

3. Page 3 of 6
Wave oscillates through these frequencies, the frequency response analyzer in turn
records the dynamic response of the system known as gain and phase.
Digilogic Systems Frequency response analyzer designed with the accuracy and
terrific features to depict the narrow changes in gain as well phase response.
Examples of analysis features can be high resolution frequency sweep, user specified
frequency range, as well as complex signal processing techniques for extracting
frequency characteristics of the system under test.
Can Digilogic Systems Frequency Response Analyzer be integrated
into existing test systems?
Yes, the Digilogic Systems Frequency Response Analyzer is designed to be easily
integrated into existing test setups and automation systems. It supports standard
interfaces and protocols, making it compatible with various testing environments
and equipment.
Benefits of Digilogic Systems Frequency Response Analyzer:
 Use of the non-intrusive Swept Sine Frequency Response Analysis method.
 True-value results due to accurate reproducibility.
 Measurement in both time and frequency domains simultaneously.
 Creative and User-friendly software: fast, easy, and efficient handling.
 Extremely small-sized unit through the use of leading-edge technology.
 Portability of the system due to the form factor of the setup.
 Delivered in a complete firm arrangement designed for field use.
 Scalability of the setup to include additional channels.

4. Page 4 of 6
What support and services does Digilogic Systems offer for their
Frequency Response Analyzer?
Digilogic Systems provides comprehensive support and services for their Frequency
Response Analyzer, including:
 Technical assistance for installation, calibration, and operation
 Software updates and maintenance to ensure optimal performance
 Customization options to meet specific testing requirements
 On-site support and troubleshooting services as needed
Application Areas:
 Transformer Condition Analysis
 Actuator Systems Validation
 Validation of Guidance Systems
 Power Supply Testing
How does the Digilogic Systems Frequency Response Analyzer
contribute to quality control and system optimization?
Digilogic Systems Frequency Response Analyzer plays a crucial role in quality
control by identifying performance issues, analyzing system stability, detecting
resonance frequencies, and optimizing system parameters for improved functionality
and reliability.

5. Page 5 of 6
What industries benefit from using Digilogic Systems Frequency
Response Analyzer?
Industries such as aerospace, automotive, electronics manufacturing, and research
institutions benefit from Digilogics Frequency response analyzers for design
validation, quality control, and performance optimization of their systems.
Safety Standards:
This product meets the requirements of the following standards of safety for
electrical equipment for measurement, control, and laboratory use:
 IEC 61010-1, EN 61010-1, UL 61010-1, CSA 61010-1
Conclusion:
Digilogic Systems Frequency Response Analyzer provides requisite and
comprehensive solution instrument for determining overall system response in
terms of sinusoidal input and frequency. Its Swept Sine Frequency Response
Analysis does not interfere with the function and hence can provide true-value
readings, which are vital in determining stability and performance parameters. The
non-simultaneous measurement in both the time and frequency domains along with
the machine like software makes it very effective, swift, and inventive. Another
positive feature is that Doted offers an easy-to-use, compact solution that is perfect
for field work but does not limit scalability and further extension of channels.

6. Page 6 of 6
In conclusion, the Digilogic Systems Frequency Response Analyzer is quite self-
explanatory, a stable and versatile device that is both accurate and practicable,
manageable and transportable, and safe for the application of a broad range of
measurement tasks related to frequency response in various sectors of the scientific,
technical, and technological community.
Contact us today to discuss your Frequency Response Analyzer
requirements
Website: https://www.digilogicsystems.com/
Phone:
Hyderabad: (+91) 40 4547 4601 / 02 / 03
Bengaluru: (+91) 80 4975 6034
Email: info@digilogicsystems.com
Locations:
HEAD OFFICE
#102, 1st Floor, DSL Abacus Tech Park Beside DSL Virtue Mall, Uppal, Hyderabad,
Telangana-500 039, India
BRANCH OFFICE
#216, 3rd floor, Zareen Heights, Varthur Road, Nagavarapalya, C. V. Raman Nagar,
Bengaluru, Karnataka — 560093.