Fod control
•Download as PPT, PDF•
0 likes•1,422 views
The document provides simple rules for preventing foreign object damage and debris (FOD) during manufacturing. It recommends keeping work areas clean and organized, securely organizing and storing loose tools and parts, and verifying that clothing and accessories do not contaminate components. Parts and equipment should be handled and stored carefully to prevent damage, deterioration, or contamination, and all sub-assemblies must be thoroughly cleaned before final assembly to prevent FOD.
Report
Share
Report
Share
Recommended
Safety bulletin 031 ring finger injuries
A Freightliner employee suffered a serious ring finger injury when his gloved hand got caught on a ladder and his ring tore through the glove. The ribbed ladder surface caught his ring as he descended, avulsing his finger and requiring surgery. To prevent such injuries, Freightliner now requires employees to remove rings or tape them with surgical tape before work. Ring avulsion injuries can range from bruising to amputation when a ring is forcefully pulled by trapped fingers or hands. Photographs show examples of serious ring avulsion injuries sustained by non-Freightliner employees wearing rings.
Foo (flight operation officer)
The document discusses the roles and responsibilities of a Flight Operations Officer (FOO). A FOO performs duties related to pre-flight preparation, flight planning, crew briefing, and post-flight activities. According to regulations, a FOO's duties are divided into three parts: flight dispatch, dispatch release, and flight watch. A FOO must be qualified through training and experience. FOOs are responsible for ensuring aircraft are airworthy, flights can be completed safely, and flight plans are completed before departure in coordination with pilots.
Safety Pyramid
This document outlines a pyramid of safety success for developing a strong safety culture in the workplace. At the base of the pyramid are consistency in practicing safety, involving all employees in their safety, addressing and correcting hazards, and managers leading by example. Higher levels include proper counseling, safety training, communication, recognizing safe work, and providing proper tools. The top of the pyramid recognizes that safe employees equal a successful department and that teamwork and helping others work safely are important.
Scissor Lift Pre-Shift Inspection
Prior to each work shift conduct a pre-start inspection to verify that the equipment and all its components are in safe operating condition.
Foreign Object Damage/Debris
FOD costs the aviation industry $13 billion per year in direct and indirect costs. Direct costs include engine maintenance, tire replacements, and aircraft body damage from ingesting foreign objects. Indirect costs, which are much higher, include delays, cancellations, schedule disruptions, liability, and loss of customers. Repairing FOD damage to aircraft engines can exceed 20% of the original purchase price of the engine. Implementing an effective FOD control program through organizational commitment, training, accountability, and coordination can help reduce these costs and prevent injuries from FOD.
CANTEEN HYGIENE.ppt
The document outlines guidelines for cafeteria hygiene to protect workers from food-borne diseases. It lists the basic requirements as separate eating rooms, adequate lighting, garbage receptacles, proper food preparation and serving, and only trained staff handling food. It then classifies and discusses various food-borne diseases caused by bacteria, parasites, toxins, chemicals, viruses and their modes of transmission including through air, water, insects, rodents, hands and infected animals or food. It also covers administrative requirements for sanitary permits and health certificates as well as the tasks of safety committees in conducting inspections and compliance. Finally it discusses provision of sanitation facilities like washing, shower and changing rooms.
The Importance of Personal Protective Equipment (PPE) for Dealers
This document discusses the importance of personal protective equipment (PPE) for dealerships. It notes that dealers are responsible for providing PPE to employees under OSHA regulations to protect them from workplace hazards. Not providing proper PPE can result in injuries to employees, liability for dealerships, and fines from OSHA. The document reviews PPE requirements for eye and face protection, respiratory protection, hand protection, and noise exposure. It stresses that dealerships must assess hazards, select required PPE, train employees on proper use, and enforce PPE policies in order to comply with OSHA regulations and protect employee safety.
Police HSE, Health, Safety, & Environment V - Instructor John H Hollis IV
Police HSE, Health, Safety, & Environment V - Instructor John H Hollis IVJohn H Hollis IV · Consultant Advisor · Director · Trainer
Recommended
Safety bulletin 031 ring finger injuries
A Freightliner employee suffered a serious ring finger injury when his gloved hand got caught on a ladder and his ring tore through the glove. The ribbed ladder surface caught his ring as he descended, avulsing his finger and requiring surgery. To prevent such injuries, Freightliner now requires employees to remove rings or tape them with surgical tape before work. Ring avulsion injuries can range from bruising to amputation when a ring is forcefully pulled by trapped fingers or hands. Photographs show examples of serious ring avulsion injuries sustained by non-Freightliner employees wearing rings.
Foo (flight operation officer)
The document discusses the roles and responsibilities of a Flight Operations Officer (FOO). A FOO performs duties related to pre-flight preparation, flight planning, crew briefing, and post-flight activities. According to regulations, a FOO's duties are divided into three parts: flight dispatch, dispatch release, and flight watch. A FOO must be qualified through training and experience. FOOs are responsible for ensuring aircraft are airworthy, flights can be completed safely, and flight plans are completed before departure in coordination with pilots.
Safety Pyramid
This document outlines a pyramid of safety success for developing a strong safety culture in the workplace. At the base of the pyramid are consistency in practicing safety, involving all employees in their safety, addressing and correcting hazards, and managers leading by example. Higher levels include proper counseling, safety training, communication, recognizing safe work, and providing proper tools. The top of the pyramid recognizes that safe employees equal a successful department and that teamwork and helping others work safely are important.
Scissor Lift Pre-Shift Inspection
Prior to each work shift conduct a pre-start inspection to verify that the equipment and all its components are in safe operating condition.
Foreign Object Damage/Debris
FOD costs the aviation industry $13 billion per year in direct and indirect costs. Direct costs include engine maintenance, tire replacements, and aircraft body damage from ingesting foreign objects. Indirect costs, which are much higher, include delays, cancellations, schedule disruptions, liability, and loss of customers. Repairing FOD damage to aircraft engines can exceed 20% of the original purchase price of the engine. Implementing an effective FOD control program through organizational commitment, training, accountability, and coordination can help reduce these costs and prevent injuries from FOD.
CANTEEN HYGIENE.ppt
The document outlines guidelines for cafeteria hygiene to protect workers from food-borne diseases. It lists the basic requirements as separate eating rooms, adequate lighting, garbage receptacles, proper food preparation and serving, and only trained staff handling food. It then classifies and discusses various food-borne diseases caused by bacteria, parasites, toxins, chemicals, viruses and their modes of transmission including through air, water, insects, rodents, hands and infected animals or food. It also covers administrative requirements for sanitary permits and health certificates as well as the tasks of safety committees in conducting inspections and compliance. Finally it discusses provision of sanitation facilities like washing, shower and changing rooms.
The Importance of Personal Protective Equipment (PPE) for Dealers
This document discusses the importance of personal protective equipment (PPE) for dealerships. It notes that dealers are responsible for providing PPE to employees under OSHA regulations to protect them from workplace hazards. Not providing proper PPE can result in injuries to employees, liability for dealerships, and fines from OSHA. The document reviews PPE requirements for eye and face protection, respiratory protection, hand protection, and noise exposure. It stresses that dealerships must assess hazards, select required PPE, train employees on proper use, and enforce PPE policies in order to comply with OSHA regulations and protect employee safety.
Police HSE, Health, Safety, & Environment V - Instructor John H Hollis IV
Police HSE, Health, Safety, & Environment V - Instructor John H Hollis IVJohn H Hollis IV · Consultant Advisor · Director · Trainer
Finger saver user guide
The document provides information about the Fingersaver tool, including its purpose, background, materials, and correct use. The Fingersaver was designed by an Exxon employee to protect fingers from impacts and pinch points during work. It moves fingers away from danger zones when using tools. Employees who use hand tools must be provided protective equipment to avoid hazards.
Knife safety
Knife safety is important because thousands of employees are injured by cuts from knives and cutting devices each year. Many injuries occur because knives are not treated with proper respect and care. To prevent accidents, workers should be properly trained on knife safety, inspect knives before use, use the right knife for each task, keep knives sharp, avoid disabling safety features, pay attention while cutting, and work on stable surfaces. Always prioritize safety when using knives.
Food Safety Level 4
Wairl O Owino successfully passed an assessment for the HABC Level 4 Award in Managing Food Safety in Catering (OCF) on April 14, 2016. The certificate, numbered FS936292, was awarded on May 4, 2016 by Pulseberry Health Consultants and certifies that Wairl O Owino met the requirements for this qualification, which is regulated by the Highfield Awarding Body for Compliance and listed on the UK Register of Qualifications.
G.H.P
Good house keeping of G.M.P area and food production plant has very significant role in company business and food safety
achievement.
Health and safety training : A must for small businesses by Floyd Arthur (PPT)
Health and safety training is important for small businesses to avoid costs from lost productivity, higher insurance premiums, and lawsuits. Training should cover fire safety, first aid, injury prevention, and dealing with workplace violence. It does not need to be long but should address the main hazards of each workplace. Employers should designate a safety officer to organize training programs and ensure safety procedures and equipment are up to date.
General Safety Presentation
The document outlines various workplace safety guidelines and procedures. It discusses the importance of working safely, proper personal protective equipment, emergency evacuation plans, safe operation of equipment like forklifts, identifying and avoiding death zones, lockout/tagout procedures, hazard communication, and medical emergencies. Disciplinary action may result from disregarding safety rules.
Human Factor Off01
This document provides a summary of key topics related to human factors in aircraft maintenance, including general human performance and limitations, social psychology factors, physical environment, tasks, communication, and human error. The goal is to raise awareness of how human behavior and errors can impact safety, and how following proper procedures can help minimize risks. Understanding human limitations and applying concepts from areas like social psychology, ergonomics, and communication can help reduce accidents caused by human factors.
Mechanical Technology Grade 12 Chapter 3 Safety In The Workshop
This slide show accompanies the learner guide "Mechanical Technology Grade 10" by Charles Goodwin, Andre Lategan & Daniel Meyer, published by Future Managers Pty Ltd. For more information visit our website www.futuremanagers.net
Machine guarding
This document provides information about machinery guarding standards and regulations. It discusses findings from WorkSafe inspections that found older machinery often lacked guarding while newer machinery was generally guarded. Standards like AS 4024 provide specifications for machine guarding and safety distances to prevent access to hazard zones. The document outlines various standards regarding risk assessment, guards, safety distances, and safety control systems that are relevant for achieving safe machinery guarding.
Human factors in Aviation
Human Factors affecting performance in Aviation. Covers the factors which affect human performance, the causes and consequences, and how to combat factors. Also covers how factors propagate into accidents,
12 lifting rigging operations
Lifting and rigging operations require competent personnel using certified equipment to minimize safety risks. Sharp edges can damage slings, so loads must be protected. Do not exceed the safe working load of any lifting gear. Establish exclusion zones and communicate clearly with other workers during lifts. Ensure loads are rigged correctly and secured once landed to complete operations safely.
Basic Food Hygiene Awareness Preview
This document is a training presentation on basic food hygiene. It introduces key concepts like defining food hygiene, identifying common sources of bacterial contamination, proper food temperature control, and cleaning and disinfection procedures. It also outlines legal requirements under the Food Safety Act of 1990 and the importance of following food safety regulations to prevent food poisoning. The goal is to educate individuals on maintaining hygienic food handling practices.
Manejodemanuales
Este documento explica varios conceptos clave relacionados con el mantenimiento de aeronaves, incluyendo el sistema ATA para organizar los sistemas de la aeronave, qué son los boletines de servicio, los números de parte y serie, y los principales manuales de mantenimiento como el AMM, IPC y WDM. También describe los conjuntos de manuales, la estructura y numeración de secciones dentro del AMM, y algunos de los documentos incluidos en el frente de los manuales de mantenimiento.
Safety in Mechanical Industries
This document discusses safety in mechanical industries. It identifies several hazards associated with mechanical equipment, including forces, pressure, cutting forces, torque, and vibration. It also discusses general mechanical hazards, hazards from moving components and tools, material handling, electrical hazards, thermal hazards, noise and vibration, hazardous materials, and welding and gas cutting. The document outlines controls to mitigate risks, including elimination, substitution, engineering controls, administrative controls, and personal protective equipment. It provides guidance on machine guarding, lockout/tagout procedures, housekeeping, signage, and emergency response.
Handtool Safety Training
The document provides information on regulations and safety guidelines for using hand tools and power tools. It discusses regulations covering hand and power tools from OSHA, including definitions, guarding requirements, and safety precautions. It also provides general safety guidelines for using hand tools and power tools, such as wearing protective equipment, keeping tools in good condition, using the right tool for the job, and following manufacturer instructions. Power tool users should be aware of electrocution and other electric shock hazards and take appropriate precautions like grounding tools and not operating tools in wet conditions.
Safety committee training
The purpose of an agenda is to provide structure and guidance for safety committee meetings. An effective agenda:
- Lists the topics that will be covered during the meeting
- Indicates the estimated time allotted for each topic
- Identifies who will lead the discussion of each topic
An agenda should typically include:
1. Call to order
2. Review and approval of previous meeting minutes
3. Review of outstanding action items and recommendations
4. Review of recent safety inspections, audits, or near misses
5. New business - New hazards identified or other safety issues to discuss
6. Set date and agenda for next meeting
7. Adjournment
The agenda helps keep meetings on track
Forklift training
Forklift training covers general forklift safety rules and procedures, operating instructions, potential hazards, and site-specific information. Only trained operators are permitted to drive forklifts. Training includes potential differences between forklifts and automobiles, pre-operation inspections, load capacity limits, fueling and maintenance procedures, and evaluation of operator skills. Retraining is required following accidents or changes in work duties or environment.
Maquinas rotativas
O documento discute os riscos e formas de prevenção associados ao uso de máquinas portáteis rotativas. Detalha os tipos de equipamentos, ferramentas abrasivas e aplicações, incluindo discos de desbaste. Fornece instruções sobre a montagem, uso e armazenamento seguros dos discos.
Ground support equipment
This document provides guidelines for using ground support equipment. It outlines minimum requirements, safety considerations, operating procedures, and storage requirements. Personnel should be trained on the equipment and follow technical manuals and standard operating procedures. Proper personal protective equipment should be worn, and equipment should receive preventative maintenance checks and be stored properly.
Lockheed Fod
This document discusses foreign object damage (FOD) prevention. It defines FOD and outlines a company policy to design and deliver FOD-free products. The company's facilities are divided into three areas - FOD Awareness, FOD Control, and FOD Critical - with increasing restrictions based on FOD risk. Everyone must follow clean-as-you-go practices and FOD prevention procedures appropriate for the area. Visitors to manufacturing areas may need an escort and to follow area-specific guidelines. The overall goal is to prevent any foreign objects that could damage products or systems.
Fod detection
This document discusses foreign object debris (FOD) detection on runways and its importance for airport safety. It outlines current FOD detection methods using computer vision and artificial intelligence technology. The document also explores the future of FOD detection, describing Nextratech Systems' capabilities to detect objects as small as 10mm using advanced image processing software that can operate under various weather conditions. Key benefits of FOD detection systems include increased runway safety and situational awareness.
More Related Content
What's hot
Finger saver user guide
The document provides information about the Fingersaver tool, including its purpose, background, materials, and correct use. The Fingersaver was designed by an Exxon employee to protect fingers from impacts and pinch points during work. It moves fingers away from danger zones when using tools. Employees who use hand tools must be provided protective equipment to avoid hazards.
Knife safety
Knife safety is important because thousands of employees are injured by cuts from knives and cutting devices each year. Many injuries occur because knives are not treated with proper respect and care. To prevent accidents, workers should be properly trained on knife safety, inspect knives before use, use the right knife for each task, keep knives sharp, avoid disabling safety features, pay attention while cutting, and work on stable surfaces. Always prioritize safety when using knives.
Food Safety Level 4
Wairl O Owino successfully passed an assessment for the HABC Level 4 Award in Managing Food Safety in Catering (OCF) on April 14, 2016. The certificate, numbered FS936292, was awarded on May 4, 2016 by Pulseberry Health Consultants and certifies that Wairl O Owino met the requirements for this qualification, which is regulated by the Highfield Awarding Body for Compliance and listed on the UK Register of Qualifications.
G.H.P
Good house keeping of G.M.P area and food production plant has very significant role in company business and food safety
achievement.
Health and safety training : A must for small businesses by Floyd Arthur (PPT)
Health and safety training is important for small businesses to avoid costs from lost productivity, higher insurance premiums, and lawsuits. Training should cover fire safety, first aid, injury prevention, and dealing with workplace violence. It does not need to be long but should address the main hazards of each workplace. Employers should designate a safety officer to organize training programs and ensure safety procedures and equipment are up to date.
General Safety Presentation
The document outlines various workplace safety guidelines and procedures. It discusses the importance of working safely, proper personal protective equipment, emergency evacuation plans, safe operation of equipment like forklifts, identifying and avoiding death zones, lockout/tagout procedures, hazard communication, and medical emergencies. Disciplinary action may result from disregarding safety rules.
Human Factor Off01
This document provides a summary of key topics related to human factors in aircraft maintenance, including general human performance and limitations, social psychology factors, physical environment, tasks, communication, and human error. The goal is to raise awareness of how human behavior and errors can impact safety, and how following proper procedures can help minimize risks. Understanding human limitations and applying concepts from areas like social psychology, ergonomics, and communication can help reduce accidents caused by human factors.
Mechanical Technology Grade 12 Chapter 3 Safety In The Workshop
This slide show accompanies the learner guide "Mechanical Technology Grade 10" by Charles Goodwin, Andre Lategan & Daniel Meyer, published by Future Managers Pty Ltd. For more information visit our website www.futuremanagers.net
Machine guarding
This document provides information about machinery guarding standards and regulations. It discusses findings from WorkSafe inspections that found older machinery often lacked guarding while newer machinery was generally guarded. Standards like AS 4024 provide specifications for machine guarding and safety distances to prevent access to hazard zones. The document outlines various standards regarding risk assessment, guards, safety distances, and safety control systems that are relevant for achieving safe machinery guarding.
Human factors in Aviation
Human Factors affecting performance in Aviation. Covers the factors which affect human performance, the causes and consequences, and how to combat factors. Also covers how factors propagate into accidents,
12 lifting rigging operations
Lifting and rigging operations require competent personnel using certified equipment to minimize safety risks. Sharp edges can damage slings, so loads must be protected. Do not exceed the safe working load of any lifting gear. Establish exclusion zones and communicate clearly with other workers during lifts. Ensure loads are rigged correctly and secured once landed to complete operations safely.
Basic Food Hygiene Awareness Preview
This document is a training presentation on basic food hygiene. It introduces key concepts like defining food hygiene, identifying common sources of bacterial contamination, proper food temperature control, and cleaning and disinfection procedures. It also outlines legal requirements under the Food Safety Act of 1990 and the importance of following food safety regulations to prevent food poisoning. The goal is to educate individuals on maintaining hygienic food handling practices.
Manejodemanuales
Este documento explica varios conceptos clave relacionados con el mantenimiento de aeronaves, incluyendo el sistema ATA para organizar los sistemas de la aeronave, qué son los boletines de servicio, los números de parte y serie, y los principales manuales de mantenimiento como el AMM, IPC y WDM. También describe los conjuntos de manuales, la estructura y numeración de secciones dentro del AMM, y algunos de los documentos incluidos en el frente de los manuales de mantenimiento.
Safety in Mechanical Industries
This document discusses safety in mechanical industries. It identifies several hazards associated with mechanical equipment, including forces, pressure, cutting forces, torque, and vibration. It also discusses general mechanical hazards, hazards from moving components and tools, material handling, electrical hazards, thermal hazards, noise and vibration, hazardous materials, and welding and gas cutting. The document outlines controls to mitigate risks, including elimination, substitution, engineering controls, administrative controls, and personal protective equipment. It provides guidance on machine guarding, lockout/tagout procedures, housekeeping, signage, and emergency response.
Handtool Safety Training
The document provides information on regulations and safety guidelines for using hand tools and power tools. It discusses regulations covering hand and power tools from OSHA, including definitions, guarding requirements, and safety precautions. It also provides general safety guidelines for using hand tools and power tools, such as wearing protective equipment, keeping tools in good condition, using the right tool for the job, and following manufacturer instructions. Power tool users should be aware of electrocution and other electric shock hazards and take appropriate precautions like grounding tools and not operating tools in wet conditions.
Safety committee training
The purpose of an agenda is to provide structure and guidance for safety committee meetings. An effective agenda:
- Lists the topics that will be covered during the meeting
- Indicates the estimated time allotted for each topic
- Identifies who will lead the discussion of each topic
An agenda should typically include:
1. Call to order
2. Review and approval of previous meeting minutes
3. Review of outstanding action items and recommendations
4. Review of recent safety inspections, audits, or near misses
5. New business - New hazards identified or other safety issues to discuss
6. Set date and agenda for next meeting
7. Adjournment
The agenda helps keep meetings on track
Forklift training
Forklift training covers general forklift safety rules and procedures, operating instructions, potential hazards, and site-specific information. Only trained operators are permitted to drive forklifts. Training includes potential differences between forklifts and automobiles, pre-operation inspections, load capacity limits, fueling and maintenance procedures, and evaluation of operator skills. Retraining is required following accidents or changes in work duties or environment.
Maquinas rotativas
O documento discute os riscos e formas de prevenção associados ao uso de máquinas portáteis rotativas. Detalha os tipos de equipamentos, ferramentas abrasivas e aplicações, incluindo discos de desbaste. Fornece instruções sobre a montagem, uso e armazenamento seguros dos discos.
Ground support equipment
This document provides guidelines for using ground support equipment. It outlines minimum requirements, safety considerations, operating procedures, and storage requirements. Personnel should be trained on the equipment and follow technical manuals and standard operating procedures. Proper personal protective equipment should be worn, and equipment should receive preventative maintenance checks and be stored properly.
What's hot (20)
Health and safety training : A must for small businesses by Floyd Arthur (PPT)
Health and safety training : A must for small businesses by Floyd Arthur (PPT)
Mechanical Technology Grade 12 Chapter 3 Safety In The Workshop
Mechanical Technology Grade 12 Chapter 3 Safety In The Workshop
Viewers also liked
Lockheed Fod
This document discusses foreign object damage (FOD) prevention. It defines FOD and outlines a company policy to design and deliver FOD-free products. The company's facilities are divided into three areas - FOD Awareness, FOD Control, and FOD Critical - with increasing restrictions based on FOD risk. Everyone must follow clean-as-you-go practices and FOD prevention procedures appropriate for the area. Visitors to manufacturing areas may need an escort and to follow area-specific guidelines. The overall goal is to prevent any foreign objects that could damage products or systems.
Fod detection
This document discusses foreign object debris (FOD) detection on runways and its importance for airport safety. It outlines current FOD detection methods using computer vision and artificial intelligence technology. The document also explores the future of FOD detection, describing Nextratech Systems' capabilities to detect objects as small as 10mm using advanced image processing software that can operate under various weather conditions. Key benefits of FOD detection systems include increased runway safety and situational awareness.
Il 407 15-108 - ENGINE FOREIGN OBJECT DAMAGE (FOD), PREVENTION OF - Bell 407
Bell Helicopter has introduced new carbon fiber inlet cowlings on some Model 407 helicopters that are configured with nutplates to mount inspection windows. Maintainers are encouraged to carefully inspect the nutplates for integrity when removing or reinstalling windows to prevent broken nutplate pieces from becoming foreign object damage in the engines. Owners and operators of Model 407 helicopters should contact Bell Helicopter Product Support Engineering with any questions about the new cowlings and nutplates.
FoD Presentation
FoD - Food on Demand the amazing new dining experience for College and Universities. FoD blends awesome culinary creations along with innovative ordering technology to deliver an industry leading dynamic dining experience. Click now to learn more...
Challenges to airport
The document discusses airport foreign object debris (FOD), including definitions and responsibilities of airports and airlines. It describes common sources of FOD, such as infrastructure degradation, construction materials, and jet blast. Methods for controlling FOD include training, inspections, coordinated maintenance and communication between airports and airlines. New technologies like radar and cameras can also detect FOD on runways and taxiways. The key is an active, team-based effort between all parties to identify, remove and prevent FOD to improve safety.
Fod Finder Brief Oct 2009
PPT is a brief description of the worlds first and only mobile FOD detection/recovery and reporting system.
Runway Safety: the surprising dominance of FOD and bird strikesI Mc C Pres To...
Presentation on runway safety and foreign object debris to the SWIFT Airport Operations conference in Montreal, September 2011. By Iain McCreary
note: slides only, does not contain text of speech
JFK FastPatch Repair Application
The document describes a concrete repair method used by ALL-TECH SOLUTIONS to fix spalled and broken concrete in jetway areas at JFK Airport. The method uses FastPatch concrete repair material to remediate defects in less than an hour per repair. The process involves saw cutting around the defect, vacuuming debris, inserting rebar if needed, priming, adding gravel for deep spots, pouring and finishing the FastPatch, and applying top sand to increase friction. This fast and permanent repair solution helps reduce foreign object debris risks and extend the lifespan of aging concrete infrastructure at the airport.
Foreign Material Mgt 2010 02 27 0901
This document discusses foreign material management (FMM) in nuclear power facilities and other industrial settings. It defines FMM and distinguishes it from foreign material exclusion (FME). FMM involves controlling all aspects of foreign materials, including production, access, inventory, physical control, detection of compromises and intrusions, analysis of events, and establishing an effective program. The document provides examples of past foreign material events and damage in nuclear and non-nuclear industries. It emphasizes that an effective FMM program requires involvement from senior management and all departments, and must be part of the safety culture.
How To 6S by Piercan USA, Inc.
This document provides an overview of 6S, which is a workplace organization method that consists of six components: Sort, Straighten, Shine, Standardize, Sustain, and Safety. It describes each component in detail, explaining the goals and implementation process. The key aspects covered include removing unnecessary items during Sort, finding proper storage locations during Straighten, cleaning during Shine, establishing standardized processes during Standardize, maintaining the system through discipline during Sustain, and identifying safety hazards. Implementing all six components creates an organized, clean, safe, and efficient work environment.
Introduction_to_NDT
This document provides an introduction to nondestructive testing (NDT) methods. It defines NDT as using noninvasive techniques to determine the integrity of a material or structure without causing damage. The six most common NDT methods are described as visual inspection, liquid penetrant testing, magnetic particle testing, eddy current testing, ultrasonic testing, and radiography. NDT is used across many industries to inspect materials and components during production and in-service to detect flaws and ensure safety and reliability.
Introduction to 6S
Introduction to 6S (5S plus Safety) methodology for continuous improvement. You will find this informative and full of practical advice to get started right away.
Food Technology - Technology in Food Production
Covering colloid structures, emulsions, foams, gels and suspensions etc as well as the function of lipids, salt and sugars in processed food. Covers food additives, functional foods with examples, modified starch and chemcial and physical changes in bread and cake making . Informative slides to help AS and A2 students studying food technology.
Airport Baggage Handling System
The document discusses baggage handling systems at airports. It describes how baggage handling systems transport checked luggage from ticket counters to airplanes and from airplanes to baggage claims. The systems perform functions like bag detection, volume regulation, load balancing, bag counting, tracking, and redirection. They have three main jobs - moving bags from check-in to departure gates, between gates during transfers, and from arrival gates to baggage claims. The document also outlines the basic processes that bags go through and how the systems work to sort bags to their proper destinations.
Viewers also liked (14)
Il 407 15-108 - ENGINE FOREIGN OBJECT DAMAGE (FOD), PREVENTION OF - Bell 407
Il 407 15-108 - ENGINE FOREIGN OBJECT DAMAGE (FOD), PREVENTION OF - Bell 407
Runway Safety: the surprising dominance of FOD and bird strikesI Mc C Pres To...
Runway Safety: the surprising dominance of FOD and bird strikesI Mc C Pres To...
Similar to Fod control
House Keeping.ppt
Housekeeping guidelines outline proper housekeeping practices to promote safety. Good housekeeping includes keeping work areas neat, halls clear of slip/trip hazards, and removing waste. It plays an important role in reducing accidents by eliminating hazards. Elements of an effective housekeeping program include regular cleaning, spill control, proper tool storage, and waste disposal. Following housekeeping tips such as cleaning spills quickly and using machine guards can help prevent accidents. Housekeeping inspections evaluate areas to promote clean and safe workplaces.
Housekeeping
The document discusses the importance of good housekeeping for safety. It states that good housekeeping is the first law of accident prevention and is a responsibility of all workers. Poor housekeeping can lead to unsafe conditions and implies an unprofessional work environment. The document provides tips for maintaining good housekeeping such as cleaning up the work area, disposing of waste properly, and storing materials and tools safely. Good housekeeping promotes efficiency, morale and reduces accidents.
House keeping by AZIZ JAMALI FFBL
The document discusses housekeeping and its importance for workplace safety. It defines housekeeping as more than just cleanliness and includes keeping work areas neat, orderly, and free of slip and trip hazards. Effective housekeeping programs aim to eliminate hazards, help jobs get done safely, and prevent accidents by reducing clutter. The document provides tips for good housekeeping practices like cleaning spills immediately, proper storage, and clear aisles and walkways.
DOAS_Everything_in_its_Place.ppt
The document discusses the importance of good housekeeping for risk management and accident prevention. It describes how slips, trips and falls are a major cause of workplace injuries and outlines the 5-S system for organizing and standardizing housekeeping practices. Implementing measures like cleaning up spills, removing clutter, and properly storing tools and equipment can significantly reduce accidents by addressing common hazards.
Office safety
Office work carries many hazards despite the perception of safety. Modern offices contain hazards like poor lighting, noise, and ergonomic issues from new technology. Each year, office workers sustain over 76,000 injuries including falls, strains, and burns. Common safety issues in offices include poor ventilation, lighting, noise levels, clutter, blocked exits, fire risks, improper lifting, electrical hazards, and ergonomic issues from furniture and tools. Maintaining a clean, well-organized work environment and following ergonomic guidelines can help reduce risks to office worker health and safety.
Back To Basic Gmp
The document discusses Good Manufacturing Practices (GMP) and contamination prevention. It covers types of contamination, sources, and how to prevent them through practices like personal hygiene, sanitation, cleaning, and equipment maintenance. GMP regulations require facilities, equipment, personnel training, and documentation to help assure product quality and safety.
Similar to Fod control (6)
Fod control
- 1. SIMPLE RULES TO PREVENT FOREIGN OBJECT DAMAGE/ DEBRIS (FOD) House keeping (Clean-As-You-Go) - Keep your work area clean and organized. Organize and Secure loose tools, fasteners, wires etc., Verify that your clothing and accessories (e.g. pens, staples, strings) do not contaminate or provide an avenue for contamination. Handle and store parts, assemblies, fixtures, and equipment in a manner that prevents damage, deterioration, or contamination. Ensure that each component or pre-assembly is thoroughly clean. Ensure that all sub-assemblies ready for final build-up are properly protected to prevent FOD. Prevent visible particles from entering the immediate work bench area of assembly. Utilize cleaning cloths that are non-shedding fiber in nature. Avoid food items at work / assembly locations. Food items not only act as FOD but also invite rats etc., which may spoil the costly machinery Clean as you GO…