ACT 3 First Aid
•Download as PPTX, PDF•
0 likes•553 views
The document discusses a first aid training course where the instructors, Tammi and Jonathan, seemed to enjoy bondage a little too much and pushed the trainees' endurance. While the training contained lots of information, the trainees were not sure they would all survive but they did pass the course in the end. Friends were also made during the intense experience.
Report
Share
Report
Share
Recommended
Nstp report
First aid is immediate care for injured or ill people until medical assistance arrives. A first aider ensures safety, assesses threats to life, provides needed care, and assists medical personnel. The objectives of first aid are to alleviate suffering, prevent further injury, and prolong life. Characteristics of a good first aider include being gentle, resourceful, observant, tactful, empathetic, and respectful. Basic life support consists of recognizing respiratory or cardiac arrest and properly applying CPR to maintain life until the victim recovers or more advanced support arrives. CPR involves chest compressions to manually pump blood through the heart until emergency help takes over.
Learning to see left vs right
The document discusses the myth of multitasking and the differences between right brain and left brain thinking. It notes that major studies have shown that multitasking decreases productivity by up to 40% and that it takes 20 minutes to refocus on a task after an interruption. The document also explains that right brain thinking is more visual and intuitive, focusing on shapes, lines and colors, while left brain thinking is more logical and uses symbols and labels. It emphasizes that to draw well, one needs to tap into right brain thinking and see objects as combinations of shapes and lines rather than symbols or labels.
List of ceramicists. slideshow
The document provides instructions for a research assignment asking students to pick a ceramic artist from a provided list, write a report with key information about the artist, and critique one of their artworks. The document then lists over 30 ceramic artists for students to choose from for their research.
Unit 3 Critiquing Artwork
This document outlines the four steps for critiquing an artwork: 1) Describe what you see in the artwork, noting details like the title, artist, date, and objects depicted. 2) Analyze the artist's use of elements and principles of design. 3) Interpret the meaning and message conveyed by the artwork. 4) Make a personal judgment about the quality and success of the artwork in conveying its message, stating whether you would display or recommend it. Specific questions are provided under each step to guide the critique.
Gr10 u5 research an artist and imitate style
The culminating activity for this unit is worth 20% of the student's final mark and has two parts: 1) A 2-3 page typed report researching and providing key biographical and stylistic information about an artist from an approved list, including a critique of one artwork. 2) An original artwork created using materials studied in class that imitates the researched artist's style, for which sketches must be submitted and approved. Both parts will be evaluated on creativity, technique, and composition.
Intro to drawing avi 201
The document summarizes an art class where students were introduced to drawing terminology and techniques. It outlines the day's activities which included learning about drawing from presentations and a jigsaw activity where students taught each other in groups. Key elements of drawing discussed were media, perspective, tone and shading techniques. The teacher provided resources on drawing and examples of famous artists to illustrate techniques. The goal was for students to understand fundamental concepts of drawing by the end of the class.
Gr9 elements of design simcoe
This document provides examples of artworks that demonstrate different elements of design including line, value, texture, color, shape, form, and space. It lists over 20 specific artworks ranging from ancient Egyptian pyramids to 20th century paintings that illustrate these fundamental elements of visual art. The artworks cited come from a variety of time periods and cultures and include works by famous artists like Van Gogh, Monet, Picasso, and Escher.
Gr 10 architecture
This document compares architectural structures from different historical periods and styles. It provides details on key characteristics of Egyptian pyramids, Greek Parthenon, Romanesque and Gothic cathedrals, Joseph Paxton's Crystal Palace, Walter Gropius' Bauhaus, Frank Lloyd Wright's Fallingwater, and postmodern architecture. Students are asked to design their own building incorporating elements from two architectural periods and draw it using two-point perspective.
Recommended
Nstp report
First aid is immediate care for injured or ill people until medical assistance arrives. A first aider ensures safety, assesses threats to life, provides needed care, and assists medical personnel. The objectives of first aid are to alleviate suffering, prevent further injury, and prolong life. Characteristics of a good first aider include being gentle, resourceful, observant, tactful, empathetic, and respectful. Basic life support consists of recognizing respiratory or cardiac arrest and properly applying CPR to maintain life until the victim recovers or more advanced support arrives. CPR involves chest compressions to manually pump blood through the heart until emergency help takes over.
Learning to see left vs right
The document discusses the myth of multitasking and the differences between right brain and left brain thinking. It notes that major studies have shown that multitasking decreases productivity by up to 40% and that it takes 20 minutes to refocus on a task after an interruption. The document also explains that right brain thinking is more visual and intuitive, focusing on shapes, lines and colors, while left brain thinking is more logical and uses symbols and labels. It emphasizes that to draw well, one needs to tap into right brain thinking and see objects as combinations of shapes and lines rather than symbols or labels.
List of ceramicists. slideshow
The document provides instructions for a research assignment asking students to pick a ceramic artist from a provided list, write a report with key information about the artist, and critique one of their artworks. The document then lists over 30 ceramic artists for students to choose from for their research.
Unit 3 Critiquing Artwork
This document outlines the four steps for critiquing an artwork: 1) Describe what you see in the artwork, noting details like the title, artist, date, and objects depicted. 2) Analyze the artist's use of elements and principles of design. 3) Interpret the meaning and message conveyed by the artwork. 4) Make a personal judgment about the quality and success of the artwork in conveying its message, stating whether you would display or recommend it. Specific questions are provided under each step to guide the critique.
Gr10 u5 research an artist and imitate style
The culminating activity for this unit is worth 20% of the student's final mark and has two parts: 1) A 2-3 page typed report researching and providing key biographical and stylistic information about an artist from an approved list, including a critique of one artwork. 2) An original artwork created using materials studied in class that imitates the researched artist's style, for which sketches must be submitted and approved. Both parts will be evaluated on creativity, technique, and composition.
Intro to drawing avi 201
The document summarizes an art class where students were introduced to drawing terminology and techniques. It outlines the day's activities which included learning about drawing from presentations and a jigsaw activity where students taught each other in groups. Key elements of drawing discussed were media, perspective, tone and shading techniques. The teacher provided resources on drawing and examples of famous artists to illustrate techniques. The goal was for students to understand fundamental concepts of drawing by the end of the class.
Gr9 elements of design simcoe
This document provides examples of artworks that demonstrate different elements of design including line, value, texture, color, shape, form, and space. It lists over 20 specific artworks ranging from ancient Egyptian pyramids to 20th century paintings that illustrate these fundamental elements of visual art. The artworks cited come from a variety of time periods and cultures and include works by famous artists like Van Gogh, Monet, Picasso, and Escher.
Gr 10 architecture
This document compares architectural structures from different historical periods and styles. It provides details on key characteristics of Egyptian pyramids, Greek Parthenon, Romanesque and Gothic cathedrals, Joseph Paxton's Crystal Palace, Walter Gropius' Bauhaus, Frank Lloyd Wright's Fallingwater, and postmodern architecture. Students are asked to design their own building incorporating elements from two architectural periods and draw it using two-point perspective.
Unit 4 History of Ceramic Sculpture
The document provides an overview of sculpture from ancient times to the present. It begins by discussing ancient figurines from places like Africa, Asia, and Europe. It then focuses on specific types of ancient sculptures like Venus figurines, Tanagra figurines, and sculptures from ancient Egypt, Moche culture, Nok culture, and China. The document also summarizes the terracotta army from the tomb of Qin Shihuangdi in China and the later development of porcelain figurines in Europe.
Gr10 u4 printmaking
This document provides instructions for a career research and printmaking project. Students will research a career related to visual arts, creating a poster and one-page description. They will present their poster to the class in a gallery walk. The document outlines requirements for the career research, including key information to include. It also provides examples to analyze the differences between Medieval and Renaissance art styles. Finally, it gives instructions on printmaking techniques like linoleum carving and using the golden ratio to design a composition integrating printmaking and drawing.
Gr 10 Portfolio zentangle. illuminated manuscript
This portfolio assignment involves creating either Zen-tangles or Illuminated Manuscripts. Zen-tangles are intricate, repetitive line designs that aim to clear the mind through the meditative process of creating them. Alternatively, Illuminated Manuscripts mimic the decorative style of medieval manuscripts through colorful illustrations and ornate lettering added to pages of text.
Gr 10 Figurative Clay Sculpture
This document provides instructions for working with clay, including important safety rules and cleaning procedures. It outlines the various tools used for sculpting with clay, such as modeling tools, ribs, and pin tools. It describes the different stages of working with clay from greenware to bisque ware to glaze ware. The document instructs students on processes like wedging, scoring, and welding clay together. It provides guidance on maintaining even thickness and drying clay evenly. Finally, it outlines assignments for making a clay vessel and figurative sculpture, including adding texture and glazing the finished pieces.
Unit 3
The document outlines the steps and components of an artwork critique:
1. Describe the sensory properties - including shape, form, line, color, space, and texture.
2. Analyze the formal qualities - such as balance, unity, proportion/size, movement/rhythm, emphasis, and pattern.
3. Discuss the expressive properties - including mood, tension, and conveyed ideas or concepts.
The critique method examines both the objective sensory aspects and subjective expressive effects of a work of art. It provides a structured approach to thoughtfully evaluating and discussing artistic creations.
Sculpture vocabulary 2
There are 4 main ways to create sculpture: additive, subtractive, modeling, and casting. Sculptors must be proficient at drawing to sketch their sculptures from multiple angles before creating the 3D work. Sculptures can be either relief, viewed from the front, or round, viewed from all sides. An armature provides internal support and saves on materials. Casting involves making a mold before creating the sculpture. Carving is subtractive by removing material like Michelangelo did with marble. Modeling builds up material like clay. The 4 fundamentals of sculpture are form, content, technique, and medium.
Gr 10 clay and Figure Drawing
The document provides instructions for working with clay in a studio, including important safety rules, tools used, clay stages, processes like wedging and scoring, techniques for clay vessels and figurative sculpture, glazing methods, and guidelines for an artist statement. Key points are that clay and glazes contain silica so dust must be avoided, clay must stay moist while working and tools/hands cleaned to prevent drain clogs, and firing is needed to make clay and glaze permanent.
UVCFall15Class10.2
In this work we read objects semiotically, discuss the history of chair design, and consider "design classics."
Gr 10 u1 pen and ink proj
The Gr. 10 Pen & Ink Project asks students to create a pen and ink design relating to the theme of "One World" for a Remembrance Day Assembly. Students will first practice techniques like Zen Tangles and shading basic forms to develop pen and ink skills. They will then design a composition demonstrating hatching, cross-hatching, and stippling to create 5 levels of grey values. The design must fill the provided space, and students will write an artist's statement explaining their design, evaluating use of values, and assessing the overall success of their artwork.
Elements of Art powerpoint
The document lists the seven elements of art: value, texture, color, line, shape/form, space, and movement. These elements are the basic building blocks that artists use to create works of visual art.
Ceramics Unit 4
This document provides information about sculptures from ancient China and Japan. It discusses how horses were important symbols that were often depicted in sculptures during Chinese dynasties like Shang, Qin, and Tang. During Tang, potters created figures called mingqi to place in tombs. Contemporary to Tang in Japan, large earthenware sculptures called haniwa were made. The document also details the terracotta army and other sculptures buried with Qin Shihuangdi to protect him in the afterlife, including over 8,000 life-sized soldier figures.
Sculpture vocabulary
The document discusses various sculpture techniques and terms. It covers the four main ways to create sculpture: additive, subtractive, modeling, and casting. It also defines key terms like relief sculpture, gesture drawing, and armature. Sculptors must create sketches from multiple angles before sculpting. The document provides examples of sculptors who used different techniques and encourages the reader to create a sculpture using modeling.
Ceramics Unit 2
This document provides information about ancient ceramics from different cultures and time periods. It discusses coil building techniques used by ancient Greeks to make storage jars. It also describes how Greeks, Moche, and Maya painted decorative scenes and figures on their pottery. Additional sections cover Japanese Jomon ceramics decorated with cord patterns, different kiln and firing methods, and techniques like raku.
2015 NCECA: Lect ure: Ceramic Art Leaving the Ghetto by Marc Leuthold
2015 NCECA: Lect ure: Ceramic Art Leaving the Ghetto by Marc LeutholdNCECA (National Council on Education for the Ceramic Arts)
In recent years, ceramics in New York have
been exhibited in highly respected galleries not
associated with ceramics. This highly promising
integration into the Fine Arts could bode well
for the future of the medium. An end to the
stigma of the “craft medium” and segregation
could finally be at hand.Ceramics Unit 5
In the early 20th century, mass production had taken over ceramic production. In the 1940s-50s, British potter Bernard Leach pushed for a revival of handmade ceramics, known as the Studio Potter Movement. Leach studied clay techniques in Japan and emphasized handmade craftsmanship. He collaborated with Japanese potter Shoji Hamada at his studio in St. Ives, England. Their teachings influenced potters in America and Canada. Peter Voulkos was inspired by Leach and Hamada's teachings and later pushed ceramic art into abstraction, blurring the line between craft and art. His non-functional sculptures highlighted clay's expressive potential.
MAPEH Health Grade 9
The document provides an overview of a draft health education module for 9th grade students. It introduces concepts of community health, environmental health, and the characteristics of a healthy community. It includes pre-assessment questions to gauge students' existing knowledge, as well as learning competencies and objectives for the module. The first lesson will define key terms and describe the characteristics of a healthy community according to the World Health Organization.
Introduction to sculpture
Sculpture has existed since prehistoric times, with early works created for religious or symbolic purposes. Major ancient civilizations like Egypt, China, Greece, and Rome produced sculptures that recorded both religious and political aspects of their societies. Techniques like carving, casting, constructing, and modeling were used. In subsequent eras, artists strived for perfection of the human form or moved towards abstraction. Contemporary sculptors continue redefining the art form using diverse materials and concepts. For a work to be considered sculpture, it must demonstrate skillful use of form, convey some message or emotion, and effectively employ sculpting techniques.
Vases from Around the World
This is an overview of pottery (specifically vases) from around the world, focusing on examples from the six main continents.
Coil pot presentation, ceramics lesson plan
Use traditional ceramics coil technique to create a well-designed vessel. Covers concepts of basic texture and design.
First aid
First aid is the initial care provided to an injured or ill person by a non-expert until definitive medical treatment can be accessed. It involves treating issues like nosebleeds, objects in the eyes, burns, and sprains in a gentle, observant, and resourceful manner without causing further pain or alarm. Proper first aid aims to soothe the victim while making the best use of available materials, with an understanding attitude and a willingness to keep learning improved techniques.
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.More Related Content
Viewers also liked
Unit 4 History of Ceramic Sculpture
The document provides an overview of sculpture from ancient times to the present. It begins by discussing ancient figurines from places like Africa, Asia, and Europe. It then focuses on specific types of ancient sculptures like Venus figurines, Tanagra figurines, and sculptures from ancient Egypt, Moche culture, Nok culture, and China. The document also summarizes the terracotta army from the tomb of Qin Shihuangdi in China and the later development of porcelain figurines in Europe.
Gr10 u4 printmaking
This document provides instructions for a career research and printmaking project. Students will research a career related to visual arts, creating a poster and one-page description. They will present their poster to the class in a gallery walk. The document outlines requirements for the career research, including key information to include. It also provides examples to analyze the differences between Medieval and Renaissance art styles. Finally, it gives instructions on printmaking techniques like linoleum carving and using the golden ratio to design a composition integrating printmaking and drawing.
Gr 10 Portfolio zentangle. illuminated manuscript
This portfolio assignment involves creating either Zen-tangles or Illuminated Manuscripts. Zen-tangles are intricate, repetitive line designs that aim to clear the mind through the meditative process of creating them. Alternatively, Illuminated Manuscripts mimic the decorative style of medieval manuscripts through colorful illustrations and ornate lettering added to pages of text.
Gr 10 Figurative Clay Sculpture
This document provides instructions for working with clay, including important safety rules and cleaning procedures. It outlines the various tools used for sculpting with clay, such as modeling tools, ribs, and pin tools. It describes the different stages of working with clay from greenware to bisque ware to glaze ware. The document instructs students on processes like wedging, scoring, and welding clay together. It provides guidance on maintaining even thickness and drying clay evenly. Finally, it outlines assignments for making a clay vessel and figurative sculpture, including adding texture and glazing the finished pieces.
Unit 3
The document outlines the steps and components of an artwork critique:
1. Describe the sensory properties - including shape, form, line, color, space, and texture.
2. Analyze the formal qualities - such as balance, unity, proportion/size, movement/rhythm, emphasis, and pattern.
3. Discuss the expressive properties - including mood, tension, and conveyed ideas or concepts.
The critique method examines both the objective sensory aspects and subjective expressive effects of a work of art. It provides a structured approach to thoughtfully evaluating and discussing artistic creations.
Sculpture vocabulary 2
There are 4 main ways to create sculpture: additive, subtractive, modeling, and casting. Sculptors must be proficient at drawing to sketch their sculptures from multiple angles before creating the 3D work. Sculptures can be either relief, viewed from the front, or round, viewed from all sides. An armature provides internal support and saves on materials. Casting involves making a mold before creating the sculpture. Carving is subtractive by removing material like Michelangelo did with marble. Modeling builds up material like clay. The 4 fundamentals of sculpture are form, content, technique, and medium.
Gr 10 clay and Figure Drawing
The document provides instructions for working with clay in a studio, including important safety rules, tools used, clay stages, processes like wedging and scoring, techniques for clay vessels and figurative sculpture, glazing methods, and guidelines for an artist statement. Key points are that clay and glazes contain silica so dust must be avoided, clay must stay moist while working and tools/hands cleaned to prevent drain clogs, and firing is needed to make clay and glaze permanent.
UVCFall15Class10.2
In this work we read objects semiotically, discuss the history of chair design, and consider "design classics."
Gr 10 u1 pen and ink proj
The Gr. 10 Pen & Ink Project asks students to create a pen and ink design relating to the theme of "One World" for a Remembrance Day Assembly. Students will first practice techniques like Zen Tangles and shading basic forms to develop pen and ink skills. They will then design a composition demonstrating hatching, cross-hatching, and stippling to create 5 levels of grey values. The design must fill the provided space, and students will write an artist's statement explaining their design, evaluating use of values, and assessing the overall success of their artwork.
Elements of Art powerpoint
The document lists the seven elements of art: value, texture, color, line, shape/form, space, and movement. These elements are the basic building blocks that artists use to create works of visual art.
Ceramics Unit 4
This document provides information about sculptures from ancient China and Japan. It discusses how horses were important symbols that were often depicted in sculptures during Chinese dynasties like Shang, Qin, and Tang. During Tang, potters created figures called mingqi to place in tombs. Contemporary to Tang in Japan, large earthenware sculptures called haniwa were made. The document also details the terracotta army and other sculptures buried with Qin Shihuangdi to protect him in the afterlife, including over 8,000 life-sized soldier figures.
Sculpture vocabulary
The document discusses various sculpture techniques and terms. It covers the four main ways to create sculpture: additive, subtractive, modeling, and casting. It also defines key terms like relief sculpture, gesture drawing, and armature. Sculptors must create sketches from multiple angles before sculpting. The document provides examples of sculptors who used different techniques and encourages the reader to create a sculpture using modeling.
Ceramics Unit 2
This document provides information about ancient ceramics from different cultures and time periods. It discusses coil building techniques used by ancient Greeks to make storage jars. It also describes how Greeks, Moche, and Maya painted decorative scenes and figures on their pottery. Additional sections cover Japanese Jomon ceramics decorated with cord patterns, different kiln and firing methods, and techniques like raku.
2015 NCECA: Lect ure: Ceramic Art Leaving the Ghetto by Marc Leuthold
2015 NCECA: Lect ure: Ceramic Art Leaving the Ghetto by Marc LeutholdNCECA (National Council on Education for the Ceramic Arts)
In recent years, ceramics in New York have
been exhibited in highly respected galleries not
associated with ceramics. This highly promising
integration into the Fine Arts could bode well
for the future of the medium. An end to the
stigma of the “craft medium” and segregation
could finally be at hand.Ceramics Unit 5
In the early 20th century, mass production had taken over ceramic production. In the 1940s-50s, British potter Bernard Leach pushed for a revival of handmade ceramics, known as the Studio Potter Movement. Leach studied clay techniques in Japan and emphasized handmade craftsmanship. He collaborated with Japanese potter Shoji Hamada at his studio in St. Ives, England. Their teachings influenced potters in America and Canada. Peter Voulkos was inspired by Leach and Hamada's teachings and later pushed ceramic art into abstraction, blurring the line between craft and art. His non-functional sculptures highlighted clay's expressive potential.
MAPEH Health Grade 9
The document provides an overview of a draft health education module for 9th grade students. It introduces concepts of community health, environmental health, and the characteristics of a healthy community. It includes pre-assessment questions to gauge students' existing knowledge, as well as learning competencies and objectives for the module. The first lesson will define key terms and describe the characteristics of a healthy community according to the World Health Organization.
Introduction to sculpture
Sculpture has existed since prehistoric times, with early works created for religious or symbolic purposes. Major ancient civilizations like Egypt, China, Greece, and Rome produced sculptures that recorded both religious and political aspects of their societies. Techniques like carving, casting, constructing, and modeling were used. In subsequent eras, artists strived for perfection of the human form or moved towards abstraction. Contemporary sculptors continue redefining the art form using diverse materials and concepts. For a work to be considered sculpture, it must demonstrate skillful use of form, convey some message or emotion, and effectively employ sculpting techniques.
Vases from Around the World
This is an overview of pottery (specifically vases) from around the world, focusing on examples from the six main continents.
Coil pot presentation, ceramics lesson plan
Use traditional ceramics coil technique to create a well-designed vessel. Covers concepts of basic texture and design.
First aid
First aid is the initial care provided to an injured or ill person by a non-expert until definitive medical treatment can be accessed. It involves treating issues like nosebleeds, objects in the eyes, burns, and sprains in a gentle, observant, and resourceful manner without causing further pain or alarm. Proper first aid aims to soothe the victim while making the best use of available materials, with an understanding attitude and a willingness to keep learning improved techniques.
Viewers also liked (20)
2015 NCECA: Lect ure: Ceramic Art Leaving the Ghetto by Marc Leuthold
2015 NCECA: Lect ure: Ceramic Art Leaving the Ghetto by Marc Leuthold
Recently uploaded
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
DRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaCommunity pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
Recently uploaded (20)
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
ACT 3 First Aid
- 3. I THINK OUR INSTRUCTORS WERE A L I T T L E I N T O B O N DAG E
- 4. SO WERE WE
- 5. WE ENDURED
- 7. NOT SURE ALL WOULD SURVIVE
- 10. BUT WE PASSED!