LED Lighting Product Attachment
•
0 likes•171 views
This document summarizes the specifications and operating instructions for a LED strip light controller. It can output 5V, 12V, or 24V at power levels up to 60W, 144W, or 288W respectively. It has a maximum current of 12A and works from -20°C to 60°C. Installation instructions specify connecting the output cable to the LED strip and power supply cables to the correct positive and negative terminals, ensuring insulation and avoiding short circuits. The controller can then adjust the light speed, brightness, and switch between dynamic and static color modes.
Report
Share
Report
Share
Download to read offline
Recommended
LED Lighting Product Attachment
This document provides instructions for troubleshooting issues with an RGB lighting controller. It describes potential problems such as random LED lighting at startup indicating a DMX or connection issue, or weak or off colors indicating a short circuit or overload. It also includes specifications for the controller such as dimensions, input/output details, and a maximum amperage of 3A. Installation instructions are provided regarding wiring components and power supply to match the LED voltage.
KINECTIC POWERED WIRELESS SWITCHES
KINETIC POWERED WIRELESS SWITCHES FEATURES
ENVIRONMENTAL PROTECTION AND ENERGY-SAVING
Self-powered. No cable connect. No battery. No solar panel inside.
Save time, save cable & labor cost.
CONVENIENCE
Easy installation and flexible move by double-side adhesive tape or screws.
No damage to wall, specialized for redecoration and house of timberwork.
SAFETY AND RELIABILITY
Fire-resistant, electric-prevention, lighting-protection, No radiation.
Reliable anti-interference function by the encryption codes.
HIGH PERFORMANCE
Be workable within 30meters inside house (through 2-3 walls) or 80 meters outside, no directional limit. More than 200,000 time for press key;
Can endure high and low temperature
MULTIFUNCTION
Available for single switch to single receiver, single switch to multi-receiver
(Maximum 10pcs), multi-switch to single receiver, multi-switch to multi-switch.
Transistorize amplifier circuit
A transistor needs a direct current (DC) bias from a battery to turn on, otherwise it will remain off. The battery provides the necessary energy for the transistor to operate, but this energy must be limited so the transistor does not overheat, break down, and become unusable. The voltage applied to the transistor from the battery needs to keep the transistor operating within its safe parameters and ratings to prevent damage.
Intro pp
Minnie and Sammy discuss their families, hobbies, and education. Minnie has one brother and one sister and loves cooking. Sammy has three sisters, one brother, and their favorite color is pink. They both attend secondary school for ages 11-16 and discuss other levels of education like primary school from ages 3-11 and university from ages 18-22.
Class 23 writing workshop 4; vocab test 5
The document outlines the agenda for a class session, which includes a writing workshop and revising Essay #4. Students will identify key parts of their essay in brackets and numbers for peer review. Classmates will read the essays and provide feedback by answering revision guide questions. Students will then revise Essay #4 based on the feedback and submit it electronically by the due date.
Advantages of an Exclusive Agreement
An exclusive listing agreement with a real estate agent provides several advantages to sellers: it allows the agent to negotiate for a higher selling price and turn down offers as needed; it permits the agent to place a yard sign advertising the property and invest more in other advertising since their efforts will be protected; and it gives agents incentive to work together and share the listing, providing more exposure for the property. An exclusive agreement also keeps sellers better informed about the transaction process and allows them to divert all inquiries to the dedicated agent to save time.
Docker: Fire your Sysadmin and use Docker to build, ship and run any app, any...
This document introduces Docker and its benefits for building, shipping, and running applications. It demonstrates how Docker allows developers to package applications and dependencies into containers that can run on any system with Docker installed. Examples show how to run containers, share code directories, commit container changes to new images, and use Docker Compose to define and run multi-container applications with linked services.
Alcohol withdrawal
An overview of alcoholism and alcohol withdrawal treatment in the hospital setting, including a review of the GMAWS, a potentially more user-friendly evaluation tool as compared to the standard CIWA scale.
Recommended
LED Lighting Product Attachment
This document provides instructions for troubleshooting issues with an RGB lighting controller. It describes potential problems such as random LED lighting at startup indicating a DMX or connection issue, or weak or off colors indicating a short circuit or overload. It also includes specifications for the controller such as dimensions, input/output details, and a maximum amperage of 3A. Installation instructions are provided regarding wiring components and power supply to match the LED voltage.
KINECTIC POWERED WIRELESS SWITCHES
KINETIC POWERED WIRELESS SWITCHES FEATURES
ENVIRONMENTAL PROTECTION AND ENERGY-SAVING
Self-powered. No cable connect. No battery. No solar panel inside.
Save time, save cable & labor cost.
CONVENIENCE
Easy installation and flexible move by double-side adhesive tape or screws.
No damage to wall, specialized for redecoration and house of timberwork.
SAFETY AND RELIABILITY
Fire-resistant, electric-prevention, lighting-protection, No radiation.
Reliable anti-interference function by the encryption codes.
HIGH PERFORMANCE
Be workable within 30meters inside house (through 2-3 walls) or 80 meters outside, no directional limit. More than 200,000 time for press key;
Can endure high and low temperature
MULTIFUNCTION
Available for single switch to single receiver, single switch to multi-receiver
(Maximum 10pcs), multi-switch to single receiver, multi-switch to multi-switch.
Transistorize amplifier circuit
A transistor needs a direct current (DC) bias from a battery to turn on, otherwise it will remain off. The battery provides the necessary energy for the transistor to operate, but this energy must be limited so the transistor does not overheat, break down, and become unusable. The voltage applied to the transistor from the battery needs to keep the transistor operating within its safe parameters and ratings to prevent damage.
Intro pp
Minnie and Sammy discuss their families, hobbies, and education. Minnie has one brother and one sister and loves cooking. Sammy has three sisters, one brother, and their favorite color is pink. They both attend secondary school for ages 11-16 and discuss other levels of education like primary school from ages 3-11 and university from ages 18-22.
Class 23 writing workshop 4; vocab test 5
The document outlines the agenda for a class session, which includes a writing workshop and revising Essay #4. Students will identify key parts of their essay in brackets and numbers for peer review. Classmates will read the essays and provide feedback by answering revision guide questions. Students will then revise Essay #4 based on the feedback and submit it electronically by the due date.
Advantages of an Exclusive Agreement
An exclusive listing agreement with a real estate agent provides several advantages to sellers: it allows the agent to negotiate for a higher selling price and turn down offers as needed; it permits the agent to place a yard sign advertising the property and invest more in other advertising since their efforts will be protected; and it gives agents incentive to work together and share the listing, providing more exposure for the property. An exclusive agreement also keeps sellers better informed about the transaction process and allows them to divert all inquiries to the dedicated agent to save time.
Docker: Fire your Sysadmin and use Docker to build, ship and run any app, any...
This document introduces Docker and its benefits for building, shipping, and running applications. It demonstrates how Docker allows developers to package applications and dependencies into containers that can run on any system with Docker installed. Examples show how to run containers, share code directories, commit container changes to new images, and use Docker Compose to define and run multi-container applications with linked services.
Alcohol withdrawal
An overview of alcoholism and alcohol withdrawal treatment in the hospital setting, including a review of the GMAWS, a potentially more user-friendly evaluation tool as compared to the standard CIWA scale.
Apps for SharePoint 2013
Apps for SharePoint 2013 extend the capabilities of SharePoint sites and can be hosted in different environments. There are three main hosting models - SharePoint hosted, which allows client-side coding but no server-side code or databases; provider hosted, which allows server-side coding and databases but requires authentication tokens; and auto hosted, which also allows server-side coding and databases with authentication tokens. Apps can be implemented as full pages, parts that render within an iframe, or custom user interface actions. The document then discusses the SharePoint app architecture, app packaging/deployment, accessing SharePoint services and components from apps, and tips for app development.
Be a kickass speaker - Mozcamp 2011
This document provides tips on how to become a kick-ass public speaker and addresses common myths and barriers that prevent people from speaking publicly. It encourages attendees to propose speaking opportunities and provides resources for training, including workshops, meetups, conferences and social media communities. The key points are that a good speaker is passionate about their topic and sharing that passion, speakers get better with experience, and public speaking opportunities are available all over the world for those who seek them out.
AWS Partner Presentation-Symantec-AWS Cloud Storage for the Enterprise 2012
Symantec provides an integrated approach to backing up and archiving data to the cloud. Their solutions allow for seamless configuration and storage of backups in AWS with performance enhancements like deduplication and throttling. Customers benefit from controlled deployments, visibility into cloud usage, and flexible licensing to reduce costs. Symantec works closely with AWS to deliver reliable cloud storage options for enterprises.
Concept of Business Ethics in India: A Study
"The ethics of business is the ethics of responsibility. The business man must promise that he will not harm knowingly."
-Raymond C. Baumhart
Data Intechange at Work: XML and JSON
The document discusses data interchange formats XML and JSON. XML is a standard for publishing and messaging with mechanisms for validation and semantics. JSON emerged in 2006 and is lightweight with simple structures used commonly for AJAX. While XML remains important for integration, JSON is often preferred for speed in applications. The document reviews the history and usage of both formats.
newtonian and non newtonian behaviour of fluids
This document discusses Newtonian and non-Newtonian fluid behavior. It defines Newtonian fluids as those that obey Newton's viscosity law, where viscosity is constant regardless of shear rate. Examples given are water, benzene, and ethanol. Non-Newtonian fluids' viscosity varies with shear rate and are more complex mixtures like slurries, pastes, and polymer solutions. The document categorizes non-Newtonian behavior as time-independent or time-dependent, and describes examples like shear thinning, shear thickening, thixotropy and rheopectic behavior.
Student Library Orientation
The document provides information about PHES Library including the librarian Mrs. Sumida and library assistant Mrs. Kiyonaga. It explains how to borrow books from the library, use shelf markers, search the library catalog, sections of the library including easy books, fiction, and nonfiction. Students can borrow 3 items at a time for 2 weeks and are responsible for lost or damaged books. The library is open during recess with passes for students.
Thomas Heatherwick, Modern Painters May 2010
Thomas Heatherwick is a British designer known for sculptural and textural designs. His studio designed the UK pavilion for the 2010 Shanghai Expo, featuring 60,000 acrylic rods encasing seeds that sway in the breeze. Heatherwick draws inspiration from nature and uses unusual materials in unexpected ways to create special designs. He aims to make ordinary objects and spaces more interesting through texture rather than shape.
Peatlands in the Kyoto Protocol and their potential role in post-2012 climate...
This document discusses the potential role of peatlands in future climate change legislation and carbon markets. It notes that under the Kyoto Protocol, management of peatlands was not included in accounting of emissions reductions. However, recent COP meetings have recognized the importance of peatlands as carbon sinks and agreed that rewetting drained peatlands could count towards country commitments. The document argues that properly accounting for peatlands in national inventories and carbon offset markets could significantly increase the total value of peatlands in mitigating climate change.
GoGrid/AppZero: "Moving Windows Server Applications to the Cloud in 3 Easy St...
GoGrid/AppZero: "Moving Windows Server Applications to the Cloud in 3 Easy St...GoGrid Cloud Hosting
Learn how to take the headaches and heartaches out of Windows Server Application hosting and migration using GoGrid Cloud Hosting and AppZero. If you answer "Yes" to any of these following questions, then you should review this slide-show:
* Are you are interested in learning about the cost-effective flexibility of Cloud Computing?
* Do you develop Windows Server Applications?
* Are you hosting with other Cloud Computing providers?
* Do you want to migrate your Windows Applications from a different cloud or data center?
* Are you an Enterprise customer looking to test your application in the cloud?
* Are you afraid of having to re-engineer all of your Applications because you have been told you must move to the cloud?
* Do you want to learn 3 easy steps to move Windows server applications to the cloud?
* Are you afraid of vendor lock-in?Questionare
This document appears to be a questionnaire from Annie Rose Productions asking a client questions about a media project they would like created including the target audience, objectives, theme colors, slogans, format, size and resolution, deadline, and any other relevant information. The client is asked their company name, number, contact person, and address as well as details about the project like the content, audience, goals, branding, and production specifications.
Hv9910 led driver
The HV9910 is a constant current LED driver IC that operates from 8V to 450V inputs and drives one or more LED strings. It controls an external MOSFET at frequencies up to 300kHz to provide constant current regulation. The output current can be programmed between a few mA to over 1A. It has dimming control via linear current control or low frequency PWM and is suitable for applications such as lighting, displays, and automotive uses.
Advanced motion controls b15a20
The document describes the B15A series of brushless servo amplifiers. It provides specifications for three models (B12A6, B15A8, B15A20) including voltage ratings, current limits, switching frequency and dimensions. It also details features, operating modes, pin functions, setup instructions and ordering information.
Xk 550 rev-j-2
The document provides information about the Model XK-550 Digital/Analog Trainer:
1) It has five power supplies, a function generator, digital trainer section with logic switches and indicators, and two breadboards for prototyping circuits.
2) The power supplies include two variable outputs of 0-20V and 0- -20V at 0.5A, and three fixed outputs of +12V, -12V, and +5V at 1A.
3) The function generator can produce sine, square, and triangle waves from 1Hz to 100kHz with an amplitude of 0-15Vpp.
4) The digital trainer has a clock generator, logic switches
Advanced motion controls zb6a6
This document describes the ZB12A Series brushless PWM servo amplifiers for driving brushless DC motors. The amplifiers come in two models, the ZB6A6 and ZB12A8, which can provide up to 6A and 12A of continuous current respectively. The amplifiers feature analog +/-10V input commands, closed current loop control, hall sensor commutation, and overvoltage, overcurrent and thermal protection. Optional mounting cards are also available to interface the amplifiers with motor controllers.
Advanced motion controls 120a10b 24nh
The document provides information on the 120A10 series PWM servo amplifiers from Electromate. The amplifiers are designed to drive brush DC motors and feature surface mount technology, optical isolation, and DIP switch selectable modes including current, voltage, velocity, and IR compensation. Key specifications include a 30-80V DC supply voltage, 120A peak current, 15kHz switching frequency, and 10x5.12x2.63 inch dimensions. The amplifiers have 16-pin connectors for signals and power and include features like adjustable loop gain, current limit, input gain, and offset.
Advanced motion controls 120a10b nh
The document provides information on the 120A10 series PWM servo amplifiers from Electromate. The amplifiers are designed to drive brush DC motors and feature surface mount technology, optical isolation, and DIP switch selectable modes including current, voltage, velocity, and IR compensation. Key specifications include a 30-80V DC supply voltage, 120A peak current, 15kHz switching frequency, and 10x5.12x2.63 inch dimensions. The amplifiers have 16-pin connectors for signals and power and include features like adjustable loop gain, current limit, input gain, and offset.
Advanced motion controls 120a10b 24
The document describes the 120A10 series PWM servo amplifiers. The amplifiers are designed to drive brush DC motors and feature surface mount technology. They require a single DC power supply and allow selection of operating modes like current and velocity control via DIP switches. The amplifiers provide over-current, over-voltage, and over-heating protection. They include connections for motor power and control signals along with status indicators.
Advanced motion controls z6a6ddc
The Z12ADDC Series are micro-sized PWM servo amplifiers designed to drive brush-type DC motors. They feature closed current loop control, regenerative braking, and protection against over-voltage, over-current, and over-heating. Models include the Z6A6DDC and Z12A8DDC, which can provide peak currents of 6A and 12A respectively from power supplies of 16-60VDC and 16-80VDC.
Advanced motion controls z12a8ddc
The Z12ADDC Series are micro-sized PWM servo amplifiers designed to drive brush-type DC motors. They feature closed current loop control, regenerative braking, and protection against over-voltage, over-current, and over-heating. The amplifiers require only a single power supply and PWM control signal to operate brush motors.
led dimmable driver DIM106H-12
Find a good led dimmable driver supplier / manufacturer / exporter fast. Euchips led dimmable driver DIM106H-12 supports Leading edge and Trailing edge.
Advanced motion controls 120a10b
The document describes the 120A10 series PWM servo amplifiers. The amplifiers are designed to drive brush DC motors and require only a single DC power supply. They have features such as surface mount technology, optical isolation, and DIP switch selectable modes including current, voltage, velocity, and IR compensation. The amplifiers provide full protection against over-voltage, under-voltage, over-current, and short circuits. They can interface with digital controllers or be used as standalone drives.
More Related Content
Viewers also liked
Apps for SharePoint 2013
Apps for SharePoint 2013 extend the capabilities of SharePoint sites and can be hosted in different environments. There are three main hosting models - SharePoint hosted, which allows client-side coding but no server-side code or databases; provider hosted, which allows server-side coding and databases but requires authentication tokens; and auto hosted, which also allows server-side coding and databases with authentication tokens. Apps can be implemented as full pages, parts that render within an iframe, or custom user interface actions. The document then discusses the SharePoint app architecture, app packaging/deployment, accessing SharePoint services and components from apps, and tips for app development.
Be a kickass speaker - Mozcamp 2011
This document provides tips on how to become a kick-ass public speaker and addresses common myths and barriers that prevent people from speaking publicly. It encourages attendees to propose speaking opportunities and provides resources for training, including workshops, meetups, conferences and social media communities. The key points are that a good speaker is passionate about their topic and sharing that passion, speakers get better with experience, and public speaking opportunities are available all over the world for those who seek them out.
AWS Partner Presentation-Symantec-AWS Cloud Storage for the Enterprise 2012
Symantec provides an integrated approach to backing up and archiving data to the cloud. Their solutions allow for seamless configuration and storage of backups in AWS with performance enhancements like deduplication and throttling. Customers benefit from controlled deployments, visibility into cloud usage, and flexible licensing to reduce costs. Symantec works closely with AWS to deliver reliable cloud storage options for enterprises.
Concept of Business Ethics in India: A Study
"The ethics of business is the ethics of responsibility. The business man must promise that he will not harm knowingly."
-Raymond C. Baumhart
Data Intechange at Work: XML and JSON
The document discusses data interchange formats XML and JSON. XML is a standard for publishing and messaging with mechanisms for validation and semantics. JSON emerged in 2006 and is lightweight with simple structures used commonly for AJAX. While XML remains important for integration, JSON is often preferred for speed in applications. The document reviews the history and usage of both formats.
newtonian and non newtonian behaviour of fluids
This document discusses Newtonian and non-Newtonian fluid behavior. It defines Newtonian fluids as those that obey Newton's viscosity law, where viscosity is constant regardless of shear rate. Examples given are water, benzene, and ethanol. Non-Newtonian fluids' viscosity varies with shear rate and are more complex mixtures like slurries, pastes, and polymer solutions. The document categorizes non-Newtonian behavior as time-independent or time-dependent, and describes examples like shear thinning, shear thickening, thixotropy and rheopectic behavior.
Student Library Orientation
The document provides information about PHES Library including the librarian Mrs. Sumida and library assistant Mrs. Kiyonaga. It explains how to borrow books from the library, use shelf markers, search the library catalog, sections of the library including easy books, fiction, and nonfiction. Students can borrow 3 items at a time for 2 weeks and are responsible for lost or damaged books. The library is open during recess with passes for students.
Thomas Heatherwick, Modern Painters May 2010
Thomas Heatherwick is a British designer known for sculptural and textural designs. His studio designed the UK pavilion for the 2010 Shanghai Expo, featuring 60,000 acrylic rods encasing seeds that sway in the breeze. Heatherwick draws inspiration from nature and uses unusual materials in unexpected ways to create special designs. He aims to make ordinary objects and spaces more interesting through texture rather than shape.
Peatlands in the Kyoto Protocol and their potential role in post-2012 climate...
This document discusses the potential role of peatlands in future climate change legislation and carbon markets. It notes that under the Kyoto Protocol, management of peatlands was not included in accounting of emissions reductions. However, recent COP meetings have recognized the importance of peatlands as carbon sinks and agreed that rewetting drained peatlands could count towards country commitments. The document argues that properly accounting for peatlands in national inventories and carbon offset markets could significantly increase the total value of peatlands in mitigating climate change.
GoGrid/AppZero: "Moving Windows Server Applications to the Cloud in 3 Easy St...
GoGrid/AppZero: "Moving Windows Server Applications to the Cloud in 3 Easy St...GoGrid Cloud Hosting
Learn how to take the headaches and heartaches out of Windows Server Application hosting and migration using GoGrid Cloud Hosting and AppZero. If you answer "Yes" to any of these following questions, then you should review this slide-show:
* Are you are interested in learning about the cost-effective flexibility of Cloud Computing?
* Do you develop Windows Server Applications?
* Are you hosting with other Cloud Computing providers?
* Do you want to migrate your Windows Applications from a different cloud or data center?
* Are you an Enterprise customer looking to test your application in the cloud?
* Are you afraid of having to re-engineer all of your Applications because you have been told you must move to the cloud?
* Do you want to learn 3 easy steps to move Windows server applications to the cloud?
* Are you afraid of vendor lock-in?Questionare
This document appears to be a questionnaire from Annie Rose Productions asking a client questions about a media project they would like created including the target audience, objectives, theme colors, slogans, format, size and resolution, deadline, and any other relevant information. The client is asked their company name, number, contact person, and address as well as details about the project like the content, audience, goals, branding, and production specifications.
Viewers also liked (11)
AWS Partner Presentation-Symantec-AWS Cloud Storage for the Enterprise 2012
AWS Partner Presentation-Symantec-AWS Cloud Storage for the Enterprise 2012
Peatlands in the Kyoto Protocol and their potential role in post-2012 climate...
Peatlands in the Kyoto Protocol and their potential role in post-2012 climate...
GoGrid/AppZero: "Moving Windows Server Applications to the Cloud in 3 Easy St...
GoGrid/AppZero: "Moving Windows Server Applications to the Cloud in 3 Easy St...
Similar to LED Lighting Product Attachment
Hv9910 led driver
The HV9910 is a constant current LED driver IC that operates from 8V to 450V inputs and drives one or more LED strings. It controls an external MOSFET at frequencies up to 300kHz to provide constant current regulation. The output current can be programmed between a few mA to over 1A. It has dimming control via linear current control or low frequency PWM and is suitable for applications such as lighting, displays, and automotive uses.
Advanced motion controls b15a20
The document describes the B15A series of brushless servo amplifiers. It provides specifications for three models (B12A6, B15A8, B15A20) including voltage ratings, current limits, switching frequency and dimensions. It also details features, operating modes, pin functions, setup instructions and ordering information.
Xk 550 rev-j-2
The document provides information about the Model XK-550 Digital/Analog Trainer:
1) It has five power supplies, a function generator, digital trainer section with logic switches and indicators, and two breadboards for prototyping circuits.
2) The power supplies include two variable outputs of 0-20V and 0- -20V at 0.5A, and three fixed outputs of +12V, -12V, and +5V at 1A.
3) The function generator can produce sine, square, and triangle waves from 1Hz to 100kHz with an amplitude of 0-15Vpp.
4) The digital trainer has a clock generator, logic switches
Advanced motion controls zb6a6
This document describes the ZB12A Series brushless PWM servo amplifiers for driving brushless DC motors. The amplifiers come in two models, the ZB6A6 and ZB12A8, which can provide up to 6A and 12A of continuous current respectively. The amplifiers feature analog +/-10V input commands, closed current loop control, hall sensor commutation, and overvoltage, overcurrent and thermal protection. Optional mounting cards are also available to interface the amplifiers with motor controllers.
Advanced motion controls 120a10b 24nh
The document provides information on the 120A10 series PWM servo amplifiers from Electromate. The amplifiers are designed to drive brush DC motors and feature surface mount technology, optical isolation, and DIP switch selectable modes including current, voltage, velocity, and IR compensation. Key specifications include a 30-80V DC supply voltage, 120A peak current, 15kHz switching frequency, and 10x5.12x2.63 inch dimensions. The amplifiers have 16-pin connectors for signals and power and include features like adjustable loop gain, current limit, input gain, and offset.
Advanced motion controls 120a10b nh
The document provides information on the 120A10 series PWM servo amplifiers from Electromate. The amplifiers are designed to drive brush DC motors and feature surface mount technology, optical isolation, and DIP switch selectable modes including current, voltage, velocity, and IR compensation. Key specifications include a 30-80V DC supply voltage, 120A peak current, 15kHz switching frequency, and 10x5.12x2.63 inch dimensions. The amplifiers have 16-pin connectors for signals and power and include features like adjustable loop gain, current limit, input gain, and offset.
Advanced motion controls 120a10b 24
The document describes the 120A10 series PWM servo amplifiers. The amplifiers are designed to drive brush DC motors and feature surface mount technology. They require a single DC power supply and allow selection of operating modes like current and velocity control via DIP switches. The amplifiers provide over-current, over-voltage, and over-heating protection. They include connections for motor power and control signals along with status indicators.
Advanced motion controls z6a6ddc
The Z12ADDC Series are micro-sized PWM servo amplifiers designed to drive brush-type DC motors. They feature closed current loop control, regenerative braking, and protection against over-voltage, over-current, and over-heating. Models include the Z6A6DDC and Z12A8DDC, which can provide peak currents of 6A and 12A respectively from power supplies of 16-60VDC and 16-80VDC.
Advanced motion controls z12a8ddc
The Z12ADDC Series are micro-sized PWM servo amplifiers designed to drive brush-type DC motors. They feature closed current loop control, regenerative braking, and protection against over-voltage, over-current, and over-heating. The amplifiers require only a single power supply and PWM control signal to operate brush motors.
led dimmable driver DIM106H-12
Find a good led dimmable driver supplier / manufacturer / exporter fast. Euchips led dimmable driver DIM106H-12 supports Leading edge and Trailing edge.
Advanced motion controls 120a10b
The document describes the 120A10 series PWM servo amplifiers. The amplifiers are designed to drive brush DC motors and require only a single DC power supply. They have features such as surface mount technology, optical isolation, and DIP switch selectable modes including current, voltage, velocity, and IR compensation. The amplifiers provide full protection against over-voltage, under-voltage, over-current, and short circuits. They can interface with digital controllers or be used as standalone drives.
dokumen.tips_design-a-voltmeter.pptx
This document describes the design of a voltmeter circuit that can measure unknown voltages between -9V and +9V and display the reading on a 10-segment LED display and indicator LEDs. The circuit uses operational amplifiers as voltage comparators to compare the unknown voltage to reference levels and illuminate the appropriate LED segments. Students are tasked with designing the voltage divider circuits to generate the reference levels, limiting current to the LEDs, and incorporating circuits for the indicator LEDs. PSpice simulations and calculations are required in a pre-lab report, and the full circuit design including troubleshooting is documented in a lab report.
Digital clampmeters
This document provides instructions for operating a digital clamp meter. It includes specifications for the meter such as its display, accuracy, measurement functions, and safety information. The key functions of the meter are described, including how to make current, voltage, resistance, diode, continuity, and non-contact voltage measurements. Battery replacement instructions and safety warnings are also provided.
Battery level Indicator Circuit
It is a battery level indicator program which tells the level of the battery how much it is charged. It includes the proteus pics of the program. I tells the working of the circuit.
LPD8803/LPD8806 Datasheet
LPD8803/LPD8806 as a new generation of driver chips are designed for the LED lighting
system, which uses industrial grade CMOS process, providing multi-channel constant
current driver and grayscale modulation output, it is programable, LPD8803 and LPD8806
output 3chanhel and 6 channel respectively,signal particularly suitable for discrete multigray full-color lighting system.
pe lab manual
This document provides information about experiments to characterize various power electronics devices like SCR, MOSFET, and IGBT. It includes circuit diagrams, procedures to obtain characteristics like V-I, transfer and output, and questions for a viva voce. The experiments aim to determine characteristics like latching current, holding current for SCR, and transfer and output curves for MOSFET and IGBT. Gate triggering circuits using RC and resistance triggering for SCR are also described.
Al5809
The AL5809 is a constant current linear LED driver that provides a cost-effective two pin solution for driving LEDs. It has excellent temperature stability of 20ppm/°C and regulates current to ±5% over a wide voltage and temperature range. It is available with various fixed output currents and supports both high-side and low-side driving of LED chains from 2.5V to 60V. It can linearly drive long strings of LEDs and includes features such as a wide operating temperature range, high power supply rejection ratio, and RoHS compliance.
Advanced motion controls se25a40
The document describes the SE25A40 brushless servo amplifier. It has features like small size, optical isolation, and DIP switch selectable modes. It can operate in current or encoder velocity modes and provides four quadrant regenerative operation with sinusoidal commutation. It requires a single DC power supply, has status LEDs and protection against over/under voltage and overheating. It interfaces with digital controllers or can operate standalone and comes with mounting screws and connectors for power, signals and motor phases.
Advanced motion controls se25a40ac
The document describes the SE25A40 brushless servo amplifier. It is a small, surface-mount amplifier that can operate in current or encoder velocity mode. It provides sinusoidal commutation for 3-phase brushless motors from 120-400V DC power. It has protection against overheating, overcurrent, and other faults.
Advanced motion controls b25a40
The document describes the B25A40 Series brushless servo amplifier. It is a surface-mount amplifier that can drive brushless DC motors. It has various operating modes that can be selected with DIP switches including current mode, open loop mode, and velocity modes using Hall sensors or encoders. It provides over-voltage, under-voltage, and over-current protection. It requires a single DC power supply and has status indicators and adjustable parameters to set up the gain, current limits, and offsets.
Similar to LED Lighting Product Attachment (20)
More from Ultra LEDs
LED Lighting Product Attachment
This document summarizes a PX series DMX512 decoder and driver that:
1. Converts DMX512/1990 digital signals to analog control signals and has 1-4 output channels with 256 levels of control.
2. Is used to control building and LED lights and has features like displaying DMX signal status and setting the DMX address using buttons.
3. Includes specifications like 4 decoding channels, 12-24V power supply, and interfaces for DMX signal, power, and driving RGBW modules or single-color LEDs.
LED Lighting Product Attachment
This document provides product specifications for the U-TD03 Touch Panel Dimmer, including:
- It is a new high-end touch panel controller developed by the company with a glass panel design.
- It uses a high precision capacitive touch chip for increased sensitivity and reduced accidental triggers.
- It can control various LED lights like point light sources, flexible strips, and panel lights.
LED Lighting Product Attachment
SR1009XXWI can operate in both AP and STA modes, allowing it to function as either a wireless server or client. There are multiple connection methods for IPHONE/IPAD/Android devices. Key methods include:
1. Connecting a mobile device to SR1009XXWI's default AP settings to access its web server interface and modify parameters such as SSID, IP address and mode.
2. Configuring one SR1009XXWI as an AP and others as clients to control multiple units from a single mobile device.
3. Adding an SR1009XXWI to an existing home WiFi network and configuring a static IP to control it remotely from a mobile device on the
LED Lighting Product Attachment
This document provides instructions for use of the LT-3200-6A constant voltage LED dimmer. It can be used to dim both low-power and high-power LED lamps and offers 256 levels of brightness adjustment. The dimmer uses PWM technology and has features like an infinite knob for dimming, wireless IR remote control, and preset brightness levels. Proper installation and connection are emphasized to avoid damage and safety issues. Troubleshooting tips are provided for potential issues like uneven brightness.
LED Lighting Product Attachment
The document describes a DMX512 decoder user manual. It summarizes that the SR-21XX series DMX512 decoders are reliable and cost-effective with options for constant voltage or constant current. Address selection is via DIP switch or buttons. Decoders can output up to 5 channels for uses like RGBWY and have performance parameters like input/output voltage, load current, and dimensions. Key features include DMX512 compliance, standalone or DMX modes, selectable channel outputs, and compatibility with power repeaters.
LED Lighting Product Attachment
The DMX300 is a full-color LED lighting controller that can produce 16.7 million colors. It has a digital screen, wireless remote control, various connection ports, 30 lighting modes, 8 speed levels, and memory/anti-jamming functions. It is suitable for indoor and outdoor decorative lighting applications like wall washing, tubes, and cubes.
LED Lighting Product Attachment
The DMX100 is a DMX512 LED controller that can produce 16.7 million colors using 256 levels of red, green, and blue. It has various lighting effects and modes that can be controlled using the wireless remote, and features auto-resume, anti-interference, and memory saving. It has RJ45 and XLR outputs and is convenient for installation.
LED Lighting Product Attachment
1) This document provides instructions for installing and operating a touch panel LED RGB controller.
2) The controller allows intuitive control of LED color and brightness through touch inputs. It can be wall mounted using screws or adhesive tape.
3) It has options for gradual color changing, hopping between colors, and syncing light effects to music. Users can select modes and speeds with the touch panel buttons.
LED Lighting Product Attachment
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise boosts blood flow, releases endorphins, and promotes changes in the brain which help enhance one's emotional well-being and mental clarity.
LED Lighting Product Attachment
This document provides the product specification for a high power DMX decoder and driver model PX24500B. The summary is:
1. The PX24500B uses advanced micro-computer control technology to convert DMX512/1990 signals to analog signals with 256-level brightness control.
2. It has 3 output channels that can each drive 3 amps and can drive various LED lamps.
3. Setup involves connecting the DMX signal inputs and outputs, setting the address, connecting the power input, and connecting the driver outputs to lamps.
LED Lighting Product Attachment
This LED dimmer (DMX150) controls the brightness of LED modules, strips, and wall washers. It has four modes - single color red, green, blue, and tri-color RGB. The brightness is adjusted by turning the knob left to decrease or right to increase brightness across 55 levels. It has three output channels and is suitable for full color LED lamps. It uses high quality components to avoid flickering and extend the LED life.
LED Lighting Product Attachment
This document provides instructions for an RF wireless remote controller that can control LED lighting effects and brightness levels. The remote has features like auto save, 1:1 pairing, 8 dynamic effects that can be adjusted for speed and brightness in 10 levels using the remote. It also describes installing the controller, specifying the power supply and LED connection requirements and notes to avoid short circuits on the LED output.
LED Lighting Product Attachment
The document provides instructions for an RF remote touch RGB controller. It has the following features: compatible with 12V or 24V LED lights, touch ring for color selection, 4 preset patterns (static, gradual, hopping, white), and memory function. The remote has keys to control power, mode, speed, color, brightness, and it can learn the receiver's address within 5 seconds of powering on. The controller outputs up to 216W for 12V or 288W for 24V LED strips.
LED Lighting Product Attachment
The SR-2811 DMX512 Master touch panel is used to output DMX signals to control RGBW LED lighting. It has a high sensitivity glass touch screen that can be customized in color. It has one built-in mode that can be controlled via buttons to change colors, brightness, and speed. The touch panel can also save custom colors and comes with wiring diagrams and installation instructions.
LED Lighting Product Attachment
This document provides the product specification for the PX24600 high power DMX decoder and driver. The decoder can drive 6A and supports various LED lamps. It meets the DMX512/1990 standard and can decode 1 DMX channel to output an analog 0-24V signal.
LED Lighting Product Attachment
This document provides instructions for using a multi-function RGB LED controller. It has 15 light changing modes and allows control of color, brightness, and speed using 5 keys on the remote control. The controller connects to RGB LED strips or modules using common anode wiring and works with a wireless remote that uses 3 AAA batteries. It provides over 640,000 color combinations and has a receiving range of 20 meters.
LED Lighting Product Attachment
The document summarizes the specifications and instructions for a 2.4G single color LED controller and its accompanying touch remote control. The controller has a unique address code and can be equipped with up to four remote controls to enable multi-controller synchronization. Users can select colors, brightness levels, and lighting effects via the touch remote. The controller connects loads like LED strips and works with voltages from 5-24V DC. Users match the controller to remote controls using DIP switches and buttons to enable group or individual control of connected lights.
More from Ultra LEDs (19)
Recently uploaded
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Recently uploaded (20)
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
LED Lighting Product Attachment
- 1. 'lnput: 5-24VDC -Output: 5V:<60W, 1 2V :< 1 44W, 24V :<288W *Max load current: 12A 'Working Temperature: -20'C-60 "C "Size: 35mm x 12mm x 4mm i O.2mm
- 2. ' Key MODE: Switch to dynamic mode. ' Key SPEED / BRIGHT: Adjust sp€ed or brightness. ' Key LIGHI Switch to static light mode. Description Dynamic modes PWM control l€v€l Speed grade of Dynamic Mode Brightness Level of Static Color Level zao o 8 lnstallation Guid€: ' connect the cable from the controller which marked with " output' side to LED Strip Light, please make sure the cable connect to right position and well insulated without short circuit. . Connect the 12V cable to DC l2V pow€r supply as above picture, please make sure cables are connect to right positive and negative position. Also with well insulated and without any short circuit- * Power on/off freely. iio@G