LED Lighting Product Attachment
•
0 likes•76 views
This LED dimmer (DMX150) controls the brightness of LED modules, strips, and wall washers. It has four modes - single color red, green, blue, and tri-color RGB. The brightness is adjusted by turning the knob left to decrease or right to increase brightness across 55 levels. It has three output channels and is suitable for full color LED lamps. It uses high quality components to avoid flickering and extend the LED life.
Report
Share
Report
Share
Download to read offline
Recommended
3.7 respiration notes
Cell respiration is the controlled release of energy from organic compounds in cells to produce ATP. Glucose is broken down by glycolysis into pyruvate, with a small amount of ATP produced. During anaerobic respiration, pyruvate is converted into either lactate or ethanol and carbon dioxide without further ATP production. However, during aerobic respiration pyruvate is broken down in mitochondria into carbon dioxide and water, yielding a large amount of ATP through multiple reaction steps.
Proyectos aula centro educativo aguas negras
Este documento propone un proyecto para determinar la importancia frutícola de la región del Caño de Guacamayo en Bolívar. El proyecto busca identificar y analizar las variedades de frutas de la región para determinar cuáles tienen potencial para la comercialización y así reactivar la economía local luego de los daños causados por una ola invernal. El proyecto también busca que los estudiantes y padres aprendan a aprovechar los recursos naturales a través de las tecnologías de la información para lograr la
Obamacare and its Effects on Your Small Business
Under the Affordable Care Act (ACA), also known as Obamacare, small businesses will face several new healthcare mandates beginning in 2014. Small businesses must provide employees with government-approved health insurance offering unlimited lifetime and annual coverage. Additionally, coverage must be provided for dependent children up to age 26. These changes are estimated to increase health premiums by 7% and 2% respectively. The ACA also requires businesses to bear the full cost of preventative healthcare services if they switch plans and mandates reporting healthcare costs on W-2 forms starting in 2012. To help offset rising costs, the ACA provides tax credits to small businesses that offer healthcare from 2010-2016. However, the long term costs and impacts
Trabajo 4 final
El documento presenta un análisis estadístico de los niveles de alcohol en la sangre de 300 conductores involucrados en accidentes mortales. Incluye una tabla de distribución de frecuencias de los niveles de alcohol y gráficas que muestran la frecuencia absoluta y relativa. Calcula medidas como la media, mediana y moda. Finalmente, concluye que los datos muestran una relación entre el consumo de alcohol y los accidentes de tráfico.
Overseas cosmetic surgery
This document discusses the benefits of receiving cosmetic surgery procedures abroad. It notes that cosmetic surgery overseas is often significantly cheaper than domestic procedures, allowing those who cannot afford domestic costs access to surgeries like breast reductions or dental work. Common procedures performed abroad for half the domestic cost include dental implants, veneers, and tooth extractions. The document suggests that overseas cosmetic surgery is a good option for those seeking affordable aesthetic or reconstructive treatments.
los tejidos
Los tejidos son materiales constituidos por células organizadas de forma determinada con un origen y función comunes. En los animales existen principalmente cuatro tipos de tejidos: de revestimiento, conectivos, musculares y nerviosos, mientras que en las plantas los seis principales son protectores, embrionarios, fundamentales, esqueléticos, conductores y secretores.
Recommended
3.7 respiration notes
Cell respiration is the controlled release of energy from organic compounds in cells to produce ATP. Glucose is broken down by glycolysis into pyruvate, with a small amount of ATP produced. During anaerobic respiration, pyruvate is converted into either lactate or ethanol and carbon dioxide without further ATP production. However, during aerobic respiration pyruvate is broken down in mitochondria into carbon dioxide and water, yielding a large amount of ATP through multiple reaction steps.
Proyectos aula centro educativo aguas negras
Este documento propone un proyecto para determinar la importancia frutícola de la región del Caño de Guacamayo en Bolívar. El proyecto busca identificar y analizar las variedades de frutas de la región para determinar cuáles tienen potencial para la comercialización y así reactivar la economía local luego de los daños causados por una ola invernal. El proyecto también busca que los estudiantes y padres aprendan a aprovechar los recursos naturales a través de las tecnologías de la información para lograr la
Obamacare and its Effects on Your Small Business
Under the Affordable Care Act (ACA), also known as Obamacare, small businesses will face several new healthcare mandates beginning in 2014. Small businesses must provide employees with government-approved health insurance offering unlimited lifetime and annual coverage. Additionally, coverage must be provided for dependent children up to age 26. These changes are estimated to increase health premiums by 7% and 2% respectively. The ACA also requires businesses to bear the full cost of preventative healthcare services if they switch plans and mandates reporting healthcare costs on W-2 forms starting in 2012. To help offset rising costs, the ACA provides tax credits to small businesses that offer healthcare from 2010-2016. However, the long term costs and impacts
Trabajo 4 final
El documento presenta un análisis estadístico de los niveles de alcohol en la sangre de 300 conductores involucrados en accidentes mortales. Incluye una tabla de distribución de frecuencias de los niveles de alcohol y gráficas que muestran la frecuencia absoluta y relativa. Calcula medidas como la media, mediana y moda. Finalmente, concluye que los datos muestran una relación entre el consumo de alcohol y los accidentes de tráfico.
Overseas cosmetic surgery
This document discusses the benefits of receiving cosmetic surgery procedures abroad. It notes that cosmetic surgery overseas is often significantly cheaper than domestic procedures, allowing those who cannot afford domestic costs access to surgeries like breast reductions or dental work. Common procedures performed abroad for half the domestic cost include dental implants, veneers, and tooth extractions. The document suggests that overseas cosmetic surgery is a good option for those seeking affordable aesthetic or reconstructive treatments.
los tejidos
Los tejidos son materiales constituidos por células organizadas de forma determinada con un origen y función comunes. En los animales existen principalmente cuatro tipos de tejidos: de revestimiento, conectivos, musculares y nerviosos, mientras que en las plantas los seis principales son protectores, embrionarios, fundamentales, esqueléticos, conductores y secretores.
LED Lighting Product Attachment
1) This document provides instructions for installing and operating a touch panel LED RGB controller.
2) The controller allows intuitive control of LED color and brightness through touch inputs. It can be wall mounted using screws or adhesive tape.
3) It has options for gradual color changing, hopping between colors, and syncing light effects to music. Users can select modes and speeds with the touch panel buttons.
LED Lighting Product Attachment
This document provides instructions for use of the LT-3200-6A constant voltage LED dimmer. It can be used to dim both low-power and high-power LED lamps and offers 256 levels of brightness adjustment. The dimmer uses PWM technology and has features like an infinite knob for dimming, wireless IR remote control, and preset brightness levels. Proper installation and connection are emphasized to avoid damage and safety issues. Troubleshooting tips are provided for potential issues like uneven brightness.
Manual QUBINO zmnhwd1
The document provides information on a Qubino Flush RGBW Dimmer module that can control RGB/RGBW LED strips, bulbs, and other devices. It has 4 input terminals that can be configured for LED control or 100KΩ signal readouts. It supports inclusion in a Z-Wave network and configuration via parameters to set functions like input switch type, color mode, and auto scene settings. Installation and connection details are also included.
Black track 033 Focussable Spots for 3 Phase Rails for Musea/Retail etc.
This document summarizes an LED track light that provides energy savings of up to 80% compared to other lights. It has an aluminum base and produces cool, non-UV/IR light. It is easy to install, requires no maintenance, and has a lifespan of 50,000 hours. It comes in three power options between 15-30W with adjustable beam angles from 24-60 degrees and color temperatures between 2700K-5000K. It is intended for accent lighting in retail and hospitality settings.
Black track 033 Focussable Spots for 3 Track Raiils for Musea/Retail etc.
This document summarizes an LED track light that provides energy savings of up to 80% compared to other lights. It has an aluminum base and produces cool, non-UV/IR light. It is easy to install, requires no maintenance, and has a lifespan of 50,000 hours. It comes in three power options between 15-30W with adjustable beam angles from 24-60 degrees and color temperatures between 2700K-5000K. It is intended for accent lighting in retail and hospitality settings.
Spec of RF control RGB flood light
This document provides information about an RF 100W COB RGB LED flood light, including:
1. It describes the light's functionalities such as wireless operation up to 100 meters, memory function to remember programs, and 9 dynamic and 8 static color modes.
2. The technical specifications include dimensions, input voltage, power, color, lumens output, lighting angle, control method, operating temperature range, and warranty.
3. The included RF remote controller specifications and functions for controlling the light are outlined.
4. Applications for the light include parks, squares, outdoor spaces, schools, art galleries, courtyards, and anywhere energy-saving lighting is needed.
Piezo switch plastic
Plastic piezo switches offering rugged, sealed
tamper and vandal proof solid state switching.
Exceptional durability and reliability.
Fitted with red, green and blue LED's for illumination.
www.euchips.com 100-240VAC 2 channel 2.4g dimming driver EUP20R-2WMC-0
www.euchips.com 100-240VAC 2 channel 2.4g dimming driver EUP20R-2WMC-0Shanghai Euchips Industrial Co.,Ltd.
1. Available to dimming the lights brightness
2. Constant current output, current level selectable by internal jumpers
3. Using 2.4GHz RF remote control
4. Wide range of input voltage 100VAC ~ 240VAC
5. High efficiency up to 80%
6. Protections: SCP.
7. Suitable for indoor LED lighting applicationSunlight led street light catalogue 2010 12
The document summarizes information about Rocket Street Light and Dolphin Street Light products. Rocket Street Light has a modular design that allows for better reliability. It has a reliable drive design and connectors. Dolphin Street Light has a modern streamlined design with excellent heat dissipation. It has an optimized heat dissipation design to minimize LED deterioration. Both products come in different power options and have high efficiency LEDs that provide long lifetimes of 50,000 hours.
Lc8805 b 1515 led
LC8805B 1515 SMD LED ,it is a type smart led embeded in 1515 smd , it is very small , only 1.5*1.5mm .
CCT Changeable and dimmable LED light catalogue
1. XINGHUO LED TECH LIMITED produces CCT changeable LED lights that allow the user to adjust the color temperature, brightness, and control settings like timers through wireless controllers or sensors.
2. The lights and controllers use 2.4GHz RF technology, allowing for wireless control of up to 99 light groups without connecting wires. Settings like color temperature, brightness, and timers can be customized and stored on the controllers.
3. XINGHUO LED TECH LIMITED offers a variety of CCT changeable LED lights including panels, downlights, track lights, and accessories like controllers, sensors, and switches to enable different control methods.
White track 033 track light Focussable on 3 - track lighting rail for Musea/...
This document summarizes an LED track light that provides energy savings of up to 80% compared to other lights. It has a aluminum base and is fully recyclable. It is easy to install and requires no maintenance for years. It is available in different power outputs between 15W and 20W with adjustable beam angles from 24 to 60 degrees and color temperatures between 2700K and 5000K. It has a long life of 50,000 hours and IP44 rating. Installation involves turning off power, attaching the light to the track, and turning it on using the switch.
Capacitive switch
Kirsting's capacitive switches are durable switches activated by touch with no moving parts. They have a life expectancy of 50 million cycles and are resistant to dust, chemicals, and water. The capacitive switches are easy to use and clean and can provide on/off indication through LED lights. They are suitable for industrial applications where repetitive switch activation is required.
rgbw led wireless controller CT420
Euchips the most popular led wireless controller CT420. With advanced micro-computer control technology and the 2.4G transmission, led 2.4GHZ RGBW controller and remote/WiFi gateway provide higher-performance light control functions.
Kam led swingfire_dmx_web_manual_2
The document provides instructions for operating the Kam LED Swingfire DMX lighting effect. It can be used in stand-alone sound-activated mode or controlled via DMX with 9 channels. Connecting multiple units allows for master-slave or DMX-controlled synchronization of effects across units. Proper precautions including fuse replacement and recycling are outlined.
constant voltage dimmer DIM151A-DIN
Shanghai Euchips 12-24VDC 180-360W 0-10V/1-10V constant voltage dimmer DIM151A-DIN. This constant voltage dimmer supports 0-10v/1-10v active dimming and touch dim function.
Unibox LED Lightboxes
The document describes various lightbox products from UniBox including edge lit and back lit lightboxes. It provides details on several lightbox models (Ledge 22, 34, 50, 105, 65, 135) such as dimensions, LED specifications, power consumption and attributes. The lightboxes are designed for graphic displays and come in various sizes to illuminate fabrics for retail and commercial interior environments. They can be used for exhibitions, events, retail displays and more.
Unibox ledge led lightboxes october2014
The document describes various lightbox products from Unibox including edge lit and back lit lightboxes. It provides details on their LED lighting technology, frame dimensions, power specifications, and applications for exhibition displays, retail displays, and signage. The lightboxes come in various sizes from 22mm to 135mm deep and can illuminate graphics up to 3.5m high and 50m wide. They offer bright, even illumination of tension fabric graphics that can be changed quickly.
White track 031 track light series (2)
This document summarizes an LED track light that provides energy savings of up to 80% compared to other lights. It has an aluminum base and produces cool, bright light without UV or IR rays. It has adjustable beam angles between 24 and 60 degrees, high color rendering, and a long lifetime of 50,000 hours. It is available in different power outputs, beam angles, color temperatures, and is easy to install without maintenance for years.
GHK touch switches
Decorate Your Home / Office / Resorts / Hotel with touch Screen Switch with custom Design for Elegance look.
you can also Design in Wood, Marble, Glass Materials.
LED Lighting Product Attachment
This document summarizes the specifications and operating instructions for a LED strip light controller. It can output 5V, 12V, or 24V at power levels up to 60W, 144W, or 288W respectively. It has a maximum current of 12A and works from -20°C to 60°C. Installation instructions specify connecting the output cable to the LED strip and power supply cables to the correct positive and negative terminals, ensuring insulation and avoiding short circuits. The controller can then adjust the light speed, brightness, and switch between dynamic and static color modes.
LED Lighting Product Attachment
This document summarizes a PX series DMX512 decoder and driver that:
1. Converts DMX512/1990 digital signals to analog control signals and has 1-4 output channels with 256 levels of control.
2. Is used to control building and LED lights and has features like displaying DMX signal status and setting the DMX address using buttons.
3. Includes specifications like 4 decoding channels, 12-24V power supply, and interfaces for DMX signal, power, and driving RGBW modules or single-color LEDs.
More Related Content
Similar to LED Lighting Product Attachment
LED Lighting Product Attachment
1) This document provides instructions for installing and operating a touch panel LED RGB controller.
2) The controller allows intuitive control of LED color and brightness through touch inputs. It can be wall mounted using screws or adhesive tape.
3) It has options for gradual color changing, hopping between colors, and syncing light effects to music. Users can select modes and speeds with the touch panel buttons.
LED Lighting Product Attachment
This document provides instructions for use of the LT-3200-6A constant voltage LED dimmer. It can be used to dim both low-power and high-power LED lamps and offers 256 levels of brightness adjustment. The dimmer uses PWM technology and has features like an infinite knob for dimming, wireless IR remote control, and preset brightness levels. Proper installation and connection are emphasized to avoid damage and safety issues. Troubleshooting tips are provided for potential issues like uneven brightness.
Manual QUBINO zmnhwd1
The document provides information on a Qubino Flush RGBW Dimmer module that can control RGB/RGBW LED strips, bulbs, and other devices. It has 4 input terminals that can be configured for LED control or 100KΩ signal readouts. It supports inclusion in a Z-Wave network and configuration via parameters to set functions like input switch type, color mode, and auto scene settings. Installation and connection details are also included.
Black track 033 Focussable Spots for 3 Phase Rails for Musea/Retail etc.
This document summarizes an LED track light that provides energy savings of up to 80% compared to other lights. It has an aluminum base and produces cool, non-UV/IR light. It is easy to install, requires no maintenance, and has a lifespan of 50,000 hours. It comes in three power options between 15-30W with adjustable beam angles from 24-60 degrees and color temperatures between 2700K-5000K. It is intended for accent lighting in retail and hospitality settings.
Black track 033 Focussable Spots for 3 Track Raiils for Musea/Retail etc.
This document summarizes an LED track light that provides energy savings of up to 80% compared to other lights. It has an aluminum base and produces cool, non-UV/IR light. It is easy to install, requires no maintenance, and has a lifespan of 50,000 hours. It comes in three power options between 15-30W with adjustable beam angles from 24-60 degrees and color temperatures between 2700K-5000K. It is intended for accent lighting in retail and hospitality settings.
Spec of RF control RGB flood light
This document provides information about an RF 100W COB RGB LED flood light, including:
1. It describes the light's functionalities such as wireless operation up to 100 meters, memory function to remember programs, and 9 dynamic and 8 static color modes.
2. The technical specifications include dimensions, input voltage, power, color, lumens output, lighting angle, control method, operating temperature range, and warranty.
3. The included RF remote controller specifications and functions for controlling the light are outlined.
4. Applications for the light include parks, squares, outdoor spaces, schools, art galleries, courtyards, and anywhere energy-saving lighting is needed.
Piezo switch plastic
Plastic piezo switches offering rugged, sealed
tamper and vandal proof solid state switching.
Exceptional durability and reliability.
Fitted with red, green and blue LED's for illumination.
www.euchips.com 100-240VAC 2 channel 2.4g dimming driver EUP20R-2WMC-0
www.euchips.com 100-240VAC 2 channel 2.4g dimming driver EUP20R-2WMC-0Shanghai Euchips Industrial Co.,Ltd.
1. Available to dimming the lights brightness
2. Constant current output, current level selectable by internal jumpers
3. Using 2.4GHz RF remote control
4. Wide range of input voltage 100VAC ~ 240VAC
5. High efficiency up to 80%
6. Protections: SCP.
7. Suitable for indoor LED lighting applicationSunlight led street light catalogue 2010 12
The document summarizes information about Rocket Street Light and Dolphin Street Light products. Rocket Street Light has a modular design that allows for better reliability. It has a reliable drive design and connectors. Dolphin Street Light has a modern streamlined design with excellent heat dissipation. It has an optimized heat dissipation design to minimize LED deterioration. Both products come in different power options and have high efficiency LEDs that provide long lifetimes of 50,000 hours.
Lc8805 b 1515 led
LC8805B 1515 SMD LED ,it is a type smart led embeded in 1515 smd , it is very small , only 1.5*1.5mm .
CCT Changeable and dimmable LED light catalogue
1. XINGHUO LED TECH LIMITED produces CCT changeable LED lights that allow the user to adjust the color temperature, brightness, and control settings like timers through wireless controllers or sensors.
2. The lights and controllers use 2.4GHz RF technology, allowing for wireless control of up to 99 light groups without connecting wires. Settings like color temperature, brightness, and timers can be customized and stored on the controllers.
3. XINGHUO LED TECH LIMITED offers a variety of CCT changeable LED lights including panels, downlights, track lights, and accessories like controllers, sensors, and switches to enable different control methods.
White track 033 track light Focussable on 3 - track lighting rail for Musea/...
This document summarizes an LED track light that provides energy savings of up to 80% compared to other lights. It has a aluminum base and is fully recyclable. It is easy to install and requires no maintenance for years. It is available in different power outputs between 15W and 20W with adjustable beam angles from 24 to 60 degrees and color temperatures between 2700K and 5000K. It has a long life of 50,000 hours and IP44 rating. Installation involves turning off power, attaching the light to the track, and turning it on using the switch.
Capacitive switch
Kirsting's capacitive switches are durable switches activated by touch with no moving parts. They have a life expectancy of 50 million cycles and are resistant to dust, chemicals, and water. The capacitive switches are easy to use and clean and can provide on/off indication through LED lights. They are suitable for industrial applications where repetitive switch activation is required.
rgbw led wireless controller CT420
Euchips the most popular led wireless controller CT420. With advanced micro-computer control technology and the 2.4G transmission, led 2.4GHZ RGBW controller and remote/WiFi gateway provide higher-performance light control functions.
Kam led swingfire_dmx_web_manual_2
The document provides instructions for operating the Kam LED Swingfire DMX lighting effect. It can be used in stand-alone sound-activated mode or controlled via DMX with 9 channels. Connecting multiple units allows for master-slave or DMX-controlled synchronization of effects across units. Proper precautions including fuse replacement and recycling are outlined.
constant voltage dimmer DIM151A-DIN
Shanghai Euchips 12-24VDC 180-360W 0-10V/1-10V constant voltage dimmer DIM151A-DIN. This constant voltage dimmer supports 0-10v/1-10v active dimming and touch dim function.
Unibox LED Lightboxes
The document describes various lightbox products from UniBox including edge lit and back lit lightboxes. It provides details on several lightbox models (Ledge 22, 34, 50, 105, 65, 135) such as dimensions, LED specifications, power consumption and attributes. The lightboxes are designed for graphic displays and come in various sizes to illuminate fabrics for retail and commercial interior environments. They can be used for exhibitions, events, retail displays and more.
Unibox ledge led lightboxes october2014
The document describes various lightbox products from Unibox including edge lit and back lit lightboxes. It provides details on their LED lighting technology, frame dimensions, power specifications, and applications for exhibition displays, retail displays, and signage. The lightboxes come in various sizes from 22mm to 135mm deep and can illuminate graphics up to 3.5m high and 50m wide. They offer bright, even illumination of tension fabric graphics that can be changed quickly.
White track 031 track light series (2)
This document summarizes an LED track light that provides energy savings of up to 80% compared to other lights. It has an aluminum base and produces cool, bright light without UV or IR rays. It has adjustable beam angles between 24 and 60 degrees, high color rendering, and a long lifetime of 50,000 hours. It is available in different power outputs, beam angles, color temperatures, and is easy to install without maintenance for years.
GHK touch switches
Decorate Your Home / Office / Resorts / Hotel with touch Screen Switch with custom Design for Elegance look.
you can also Design in Wood, Marble, Glass Materials.
Similar to LED Lighting Product Attachment (20)
Black track 033 Focussable Spots for 3 Phase Rails for Musea/Retail etc.
Black track 033 Focussable Spots for 3 Phase Rails for Musea/Retail etc.
Black track 033 Focussable Spots for 3 Track Raiils for Musea/Retail etc.
Black track 033 Focussable Spots for 3 Track Raiils for Musea/Retail etc.
www.euchips.com 100-240VAC 2 channel 2.4g dimming driver EUP20R-2WMC-0
www.euchips.com 100-240VAC 2 channel 2.4g dimming driver EUP20R-2WMC-0
White track 033 track light Focussable on 3 - track lighting rail for Musea/...
White track 033 track light Focussable on 3 - track lighting rail for Musea/...
More from Ultra LEDs
LED Lighting Product Attachment
This document summarizes the specifications and operating instructions for a LED strip light controller. It can output 5V, 12V, or 24V at power levels up to 60W, 144W, or 288W respectively. It has a maximum current of 12A and works from -20°C to 60°C. Installation instructions specify connecting the output cable to the LED strip and power supply cables to the correct positive and negative terminals, ensuring insulation and avoiding short circuits. The controller can then adjust the light speed, brightness, and switch between dynamic and static color modes.
LED Lighting Product Attachment
This document summarizes a PX series DMX512 decoder and driver that:
1. Converts DMX512/1990 digital signals to analog control signals and has 1-4 output channels with 256 levels of control.
2. Is used to control building and LED lights and has features like displaying DMX signal status and setting the DMX address using buttons.
3. Includes specifications like 4 decoding channels, 12-24V power supply, and interfaces for DMX signal, power, and driving RGBW modules or single-color LEDs.
LED Lighting Product Attachment
This document provides product specifications for the U-TD03 Touch Panel Dimmer, including:
- It is a new high-end touch panel controller developed by the company with a glass panel design.
- It uses a high precision capacitive touch chip for increased sensitivity and reduced accidental triggers.
- It can control various LED lights like point light sources, flexible strips, and panel lights.
LED Lighting Product Attachment
SR1009XXWI can operate in both AP and STA modes, allowing it to function as either a wireless server or client. There are multiple connection methods for IPHONE/IPAD/Android devices. Key methods include:
1. Connecting a mobile device to SR1009XXWI's default AP settings to access its web server interface and modify parameters such as SSID, IP address and mode.
2. Configuring one SR1009XXWI as an AP and others as clients to control multiple units from a single mobile device.
3. Adding an SR1009XXWI to an existing home WiFi network and configuring a static IP to control it remotely from a mobile device on the
LED Lighting Product Attachment
The document describes a DMX512 decoder user manual. It summarizes that the SR-21XX series DMX512 decoders are reliable and cost-effective with options for constant voltage or constant current. Address selection is via DIP switch or buttons. Decoders can output up to 5 channels for uses like RGBWY and have performance parameters like input/output voltage, load current, and dimensions. Key features include DMX512 compliance, standalone or DMX modes, selectable channel outputs, and compatibility with power repeaters.
LED Lighting Product Attachment
This document provides instructions for troubleshooting issues with an RGB lighting controller. It describes potential problems such as random LED lighting at startup indicating a DMX or connection issue, or weak or off colors indicating a short circuit or overload. It also includes specifications for the controller such as dimensions, input/output details, and a maximum amperage of 3A. Installation instructions are provided regarding wiring components and power supply to match the LED voltage.
LED Lighting Product Attachment
The DMX300 is a full-color LED lighting controller that can produce 16.7 million colors. It has a digital screen, wireless remote control, various connection ports, 30 lighting modes, 8 speed levels, and memory/anti-jamming functions. It is suitable for indoor and outdoor decorative lighting applications like wall washing, tubes, and cubes.
LED Lighting Product Attachment
The DMX100 is a DMX512 LED controller that can produce 16.7 million colors using 256 levels of red, green, and blue. It has various lighting effects and modes that can be controlled using the wireless remote, and features auto-resume, anti-interference, and memory saving. It has RJ45 and XLR outputs and is convenient for installation.
LED Lighting Product Attachment
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise boosts blood flow, releases endorphins, and promotes changes in the brain which help enhance one's emotional well-being and mental clarity.
LED Lighting Product Attachment
This document provides the product specification for a high power DMX decoder and driver model PX24500B. The summary is:
1. The PX24500B uses advanced micro-computer control technology to convert DMX512/1990 signals to analog signals with 256-level brightness control.
2. It has 3 output channels that can each drive 3 amps and can drive various LED lamps.
3. Setup involves connecting the DMX signal inputs and outputs, setting the address, connecting the power input, and connecting the driver outputs to lamps.
LED Lighting Product Attachment
This document provides instructions for an RF wireless remote controller that can control LED lighting effects and brightness levels. The remote has features like auto save, 1:1 pairing, 8 dynamic effects that can be adjusted for speed and brightness in 10 levels using the remote. It also describes installing the controller, specifying the power supply and LED connection requirements and notes to avoid short circuits on the LED output.
LED Lighting Product Attachment
The document provides instructions for an RF remote touch RGB controller. It has the following features: compatible with 12V or 24V LED lights, touch ring for color selection, 4 preset patterns (static, gradual, hopping, white), and memory function. The remote has keys to control power, mode, speed, color, brightness, and it can learn the receiver's address within 5 seconds of powering on. The controller outputs up to 216W for 12V or 288W for 24V LED strips.
LED Lighting Product Attachment
The SR-2811 DMX512 Master touch panel is used to output DMX signals to control RGBW LED lighting. It has a high sensitivity glass touch screen that can be customized in color. It has one built-in mode that can be controlled via buttons to change colors, brightness, and speed. The touch panel can also save custom colors and comes with wiring diagrams and installation instructions.
LED Lighting Product Attachment
This document provides the product specification for the PX24600 high power DMX decoder and driver. The decoder can drive 6A and supports various LED lamps. It meets the DMX512/1990 standard and can decode 1 DMX channel to output an analog 0-24V signal.
LED Lighting Product Attachment
This document provides instructions for using a multi-function RGB LED controller. It has 15 light changing modes and allows control of color, brightness, and speed using 5 keys on the remote control. The controller connects to RGB LED strips or modules using common anode wiring and works with a wireless remote that uses 3 AAA batteries. It provides over 640,000 color combinations and has a receiving range of 20 meters.
LED Lighting Product Attachment
The document summarizes the specifications and instructions for a 2.4G single color LED controller and its accompanying touch remote control. The controller has a unique address code and can be equipped with up to four remote controls to enable multi-controller synchronization. Users can select colors, brightness levels, and lighting effects via the touch remote. The controller connects loads like LED strips and works with voltages from 5-24V DC. Users match the controller to remote controls using DIP switches and buttons to enable group or individual control of connected lights.
More from Ultra LEDs (18)
Recently uploaded
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
AppSec PNW: Android and iOS Application Security with MobSF
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
Principle of conventional tomography-Bibash Shahi ppt..pptx
before the computed tomography, it had been widely used.
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/how-axelera-ai-uses-digital-compute-in-memory-to-deliver-fast-and-energy-efficient-computer-vision-a-presentation-from-axelera-ai/
Bram Verhoef, Head of Machine Learning at Axelera AI, presents the “How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-efficient Computer Vision” tutorial at the May 2024 Embedded Vision Summit.
As artificial intelligence inference transitions from cloud environments to edge locations, computer vision applications achieve heightened responsiveness, reliability and privacy. This migration, however, introduces the challenge of operating within the stringent confines of resource constraints typical at the edge, including small form factors, low energy budgets and diminished memory and computational capacities. Axelera AI addresses these challenges through an innovative approach of performing digital computations within memory itself. This technique facilitates the realization of high-performance, energy-efficient and cost-effective computer vision capabilities at the thin and thick edge, extending the frontier of what is achievable with current technologies.
In this presentation, Verhoef unveils his company’s pioneering chip technology and demonstrates its capacity to deliver exceptional frames-per-second performance across a range of standard computer vision networks typical of applications in security, surveillance and the industrial sector. This shows that advanced computer vision can be accessible and efficient, even at the very edge of our technological ecosystem.“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Mutation Testing for Task-Oriented Chatbots
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Recently uploaded (20)
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
AppSec PNW: Android and iOS Application Security with MobSF
AppSec PNW: Android and iOS Application Security with MobSF
Principle of conventional tomography-Bibash Shahi ppt..pptx
Principle of conventional tomography-Bibash Shahi ppt..pptx
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
LED Lighting Product Attachment
- 1. LED DIMMER DMX150 Summarize This product is used for brightness control for LED modules, strip,wall washer, etc.. Modes: There are four modes- Single color R、Single color G、Single color B and Tri-color RGB all bright. Push the botton to change mode.Turn left to decrease the brightness, turn right to increase the brightness. Totally 55 levels of brightness adjustment.Products selected for the 30 week, the pulse of the pulse switch, 5 to 55 pulse of 0 ~ 100% output brightness. 3 channels of output, suitable for full color LED lamps. Specification Features Adopt high quality components,avoid wave current,protract the LED's life; Improved circuit,light-regulating is stability,no flicker; Delicate,soft and limitless brightness regulate; Interference-defending circuit inside,no influence to the appliances; Operating Temperatrue：﹣20℃﹣50℃. Dimension Dimension 87*87*67mm power consumption ≤0.5W Item DM150 Input Voltage 12~24VDC Output Signal DXM512 color Silver DMX channel 1 Updated at 2009-11-23 -1- DMX150-V1.2
- 2. LED DIMMER DMX150 Installation 1、2-core in and 2-core out.Note the input voltage is 12~24VDC. 2、Please install by electrician,select a proper location and distinguish the power wire and load wire. 3、Do not install when power is on,dis-connect the load if can not avoid. 4、Turn on the power after checking the line. 5、Wiring: DC12V input voltage, wire: 2-core white cable,inside it is RED(+) and BLACK(-) wire; Dimmer signal output: 2-core black cable,the wire with white mark is cathode, the other one is anode. Announcements 1、Not proper for using in high temperature,unstable voltage or dankish place. 2、Only test for LED,not guarantee for other use. Optional Updated at 2009-11-23 -2- DMX150-V1.2