CCT Changeable and dimmable LED light catalogue

CCT changeable LED Light
XINGHUO LED TECH LIMITED
Your best LED lighting partner in China
XINGHUO LED TECH LIMITED
web: www.ledxh.cn Tel: 0086-755-29681895 Email: support@ledxh.cn

CCT changeable LED light
What kind of CCT
changeable light
we can produce?

Why should I take this type LED lights?
1. You can change the color and brightness in different time and
atmosphere by controllers, the color from warm white to neutral white to
daylight white and cool white, the Kelvin from 2700-6500K, you can
change as you want.
2. RF controller, no need to connect the dimmer and lamps with wire,
easier installation, easier control, save time, save money.
3. 4 way to controller the lamps, RF controller,
Panel control, Sensor control
and switch control.
4. Automatically control the brightness
and the wattage with sensor,
such as you have set the lux in your room,
it will less wattage and brightness in day, and
more wattage and brightness in night,
CCT changeable LED light

CCT changeable 2.4G RF controller
Function description:
1. Turn on the lamps
2. Turn off the lamps
3. Set up night light mode
4. Fast choose the color temperature
5. Fast choose the brightness
6. Set up time on
7. Set up time off
8. Gradually increase the brightness
9. Reduce the color temperature
10. Increase the color temperature
11. Choose all lights
12. Gradually reduce the brightness
13. Set up status B
14. Set up status A
15. Number area
16. Copy the same controller
17. Set up the light ID

Instructions of CCT changeable 2.4G RF controller
2.4G Controller Function description:
1.1pc controller can control 99 groups light separately or together, 1 group can be unlimited lamps
2. Every light can be setted an ID No. by controller, the ID No. is available from 1-99.
3. The controller can turn on/off the light, adjust the color and brightness separately or together.
4. The controller can set the time on/off in 1-9 hours.
5. Every controller and the lamps must code matching, only the same code, the controller can control
the lamp, you can copy another controller for back up, that is to say, 2 or more controller can
work with one lamp if you copy the controllers,
6. Control distance is 20-30 meters without obstacle
7. There is night light mode(about 5% brightness) with the controller.
8. They controller can remember two typse status(color and brightness) of the lamps,
9. There is circle mode with the controller to show you different status of the lamp, .

Instructions of CCT adjustable mobile controller
1. How to set up the light ID?
(1).Turn on the light that you want to control
(2).Press a number, 1-99 is available. Then press the ID button.
(3).Repeat the step (2), to avoid the wrong input.
(4).Turn off all the light, setting success.
Attention: all steps need be finished in 15 seconds.
2. How to control the light?
(1).If you want to control one group light separately, such group ID 12, press the
number area 1 and 2 quickly, then you can control group 12 lamps’ brightness and
the color etc.
(2). If you want to control all light at the same time,
press “ALL” button first, then change the modes as you want,
3. How to set the time on/off?
(1).Press the group ID number, then press “ID setting key” button.
(2).Press the number button 1-9, for 1-9 hours.
Then press the timing light button. Setting success.
(3).Press “0” button, then press the timing light button,
Cancel the setting before.
4. How to copy controller?
For example, if you want to take new controller for back up, firstly press new
controller’s “S” button and old controller’s “ON” button at the same time.
The distance between old and new controller must be within 10 cm,
and must last 10 seconds, then ok,

Instructions of CCT adjustable mobile controller
5. How to set night light mode?
Turn off the lamps with RF controller, then press the button key 3 of the controller, then the night
light modes ON,
the brightness will be 5% of the rated output.
6. Why and how to set up the status mode?
Why?
When we have dinner, we may change the color to warm white or natrual white, but when we get
up, we may change the color to daylight white or cool white, you can set A for eating modes
and B for set up modes etc
How?
(1).Changing the brightness or color as you want (2).Choose ID No. of the light by controller
(3).Press ”ID” button and then press “A” or “B” Button, The light will remember mode.
(4). Press the ID number of the light. (5).Then press “A” or “B” button, “A” or “B” mode will be work.
7. How to fast choose the color temperature?
Press the Fast Selection Color Temperature Button, you can fast choose warm white , neutral
white, daylight White and cool white
8. How to fast choose the brightness?
Press the Fast Selection Brightness Button,
You can fast choose the brightness Of 25%, 50%, 75% and 100%.

CCT Adjustable LED Panel Light
• LED light source: SMD 2835 LEDs
• Lumen: 20-24lm/led 90-100lm/W
• Housing Material : 6063 Aluminum Alloy heat sink
• Power Option: 300*300mm 18W; 300x600mm 24W, 600*600mm, 620*620mm and
300*1200mm 36W.
• Driver: 2.4G RF dimmable driver, CE/ROHS approved, PF>0.95, PE>88%
• Remote control: 1pc remote can control 99pcs lamps,
• Color: warm white, neutral white, daylight white, cool white, 2700-6500K
• Warranty: 3 years warranty, any quality problem, we will send driver or lamp or
accessories for replacement first, we pay the shipping cost too

CCT Adjustable COB LED Down Light
• LED light source: Epistar COB LEDs
• Housing Material : Die cast Aluminum or 6063 brush Aluminum alloy or A1070 cold
forging heat sink Aluminum alloy
• Power Option: 20W COB
• Warranty: 3 years warranty any quality problem, we will send driver or lamp or

CCT Adjustable SMD LED Down Light
• LED light source: Samsung SMD5730LEDs
• Housing Material : Die cast pure aluminum,
• Power Option: 20W and 30W SMD LEDs,
• Remote control: 1pc remote can control 99 group lamps,

CCT Adjustable LED Track Light
• LED light source: Epistar COB LEDs
• Housing Material : Die cast aluminum, and A1070 cold forging heat sink
• Power Option: 20W COB LEDs,

1.
86 RF control panel
Function description:
1. Turn on the lamps
2. Turn off the lamps
3. Gradually increase the brightness
4. Reduce the color temperature
5. Increase the color temperature
6. Choose all lights
7. Gradually reduce the brightness
8. Number area 1
9. Number area 2
2.
3.
4.
5.
6..
7.
8.
9.
86 RF control panel
86 RF control panel for the CCT LED light

2.4G RF light sensor
1. Power: Battery operated,
2. Frequency: 2.4G
3. Control distance: 20meters
4. Control qty of the light:
Unlimited lamps
5. Founction: test the environment
lux and send information to the
lamps matched to change the
brightness and wattage
automaticly
6. When the lamps works with
automatic modes, you could not
change the brightness with
controller
2.4G RF light sensor control
2.4G RF Light sensor for the CCT LED light

Normal swicth control
If you do not want to controllers, panel
control and sensor control,
it is also ok to take normal switch
control the color and the brightness,
Turn on the lamps, warm white color
100% brightness, switch the lamp and on,
warm white 50% brightness , then switch
again, on, neutral white 100% brightness,
switch off and on, neutral white 50%
brightness, switch off and on, cool white
100% brightness, swich off and on, cool
white 50% brightness.
Switch on and off must within 2
seconds, you can change 3 color and 2
brightness by swithch.
Normal swicth control
Normal swicth control the CCT LED light

The End
Thanks, for more details, please
contact with our sales or
technology department
Add: 3F Bldg3, Landwind Industrial Zone, Tangtou Avenue,
Shiyan Town, Bao'an District, Shenzhen, China. 518108
Tel: 0086-755-29681895 Fax: 0086-755-29681896
Web: www.ledxh.cn Email: support@ledxh.cn

CCT Changeable and dimmable LED light catalogue

More Related Content

What's hot

Viewers also liked

Similar to CCT Changeable and dimmable LED light catalogue

More from John Zuo TUV GS LED light john.zuo88@gmail.com

CCT Changeable and dimmable LED light catalogue