2. SANITARY EQUIPMENT
THREAD SEALS
Clean and non-toxic
NEO FERMIT UNIVERSAL Non-sticky
Does not irritate skin
For metal threaded connections in conjunction with hemp
Suitable for gas and drinking water in domestic equipment installation. Solvent-free
Non-shrinking
Area of use:
Non-hardening
Water – for drinking water, hot and cold: Temperature range: 0°C to +95°C / Pressure: 16 bar
Area of use: Heating: Temperature range: 0°C to +130°C / Pressure: 7 bar Does not dry up
Area of use: Gas: Temperature range: -20°C to +70°C / Pressure: 5 bar Dismountable
Use: for all types of gas including natural gas and liquefied petroleum gas in the gaseous phase
150g tube 325g tube 450g tin 800g tin 4kg bucket
01002 01003 01004 01005 01007
According to DIN EN 751-2 and DIN 30660 approved by DVGW (German Gas and Water Association)
for domestic installation of gas and drinking water under: DVGW – Reg. No. NV-5142BM0052.
HEMP
Flax
Use together with the sealing pastes Neo Fermit Universal,
Fermit-Spezial and Hochdruck-Fermit.
Improves the stability of the connection under pressure.
Temperature resistance: +140°C
200g tress 80g bobbin 40g bobbin Dispenser 40g flax dispenser 80g flax dispenser
24002 24003 24007 24004 24005 24006
Easy to work with
FERMIT SPEZIAL (service water) Seals immediately
Can be dismounted at any time
Light-coloured thread sealing paste,
can be worked easily and quickly and does not harden. Does not dry up
Application in conjunction with hemp. Reliable and safe
Not for gas and drinking water units in domestic equipment installation.
Temperature range: -25°C to +100°C
70g tube 650g tin 5kg bucket
02001 02003 02004
For all threads according to DIN 2999 up to a diameter of 2 inches. Gas, water, heating and compressed air units
up to a maximum pressure of 10 bar. In the case of flange seals coat both sides with Fermit-Spezial.
Productcatalogue 3
3. SANITARY EQUIPMENT
THREAD SEALS
Easy to work with
HOCHDRUCK-FERMIT Does not dry up
Connections can be undone again
Pressure-proof and heat-resistant putty, also in conjunction with hemp
Non-toxic, pasty putty for sealing threads, Heat and high pressure-resistant
flanges and faces on high-pressure equipment, Reliable/safe
turbine casings, steam lines etc. Can be stressed immediately
Temperature range: up to +160°C / Pressure: 16 bar
650g tin 5kg bucket
03001 03003
For all threads according to DIN 2999 up to 2 inches in diameter
Coat flanges, faces and intermediate shims on both sides with Hochdruck-Fermit
Easy to work with
FERMITOL liquid Seals can be put into
service immediately
Versatile liquid synthetic resin sealant Integrated brush
Universal sealing compound and glue, resistant to oil; liquefied
Practical in use
petroleum gas, petrol, benzene, paraffin/kerosene, greases, water,
Instant sealing
steam, acid, alkaline solution, brine, seawater etc. ..., once set also
Reliable – safe
resistant to spirit and all fuel mixtures
Economical
For the sealing of threads, flanges and faces on water, petrol, grease and oil lines, Can be used with and
oil heating units, propane gas units, engines, engine casings, gearboxes, machines, without hemp
process equipment and tanks.
Fermitol is suitable for many purposes and numerous materials.
Temperature range: -10°C to +130°C / Pressure: 4 bar
125g bottle 250g bottle 1kg refill bottle
04001 04002 04004
Use without hemp
FERMITAN service water Suitable for hot and cold water
Can be subjected to
Anaerobic sealant for cylindrical and conical metal threads pressure quickly
for hot and cold water circuits .
Enriched with PTFE
Temperature range: -30°C to +90°C, briefly up to 110°C
Pressure: After 15 min = 4 bar, after 2 hrs = 30 bar
Polymerisation time: 1 – 3 hours
Max. thread diameter: 2 inches
Max. thread play: 0,25mm
75ml bottle
05001
Use without hemp
Heating Suitable for hot water, gas and
oil circuits
Anaerobic sealant for cylindrical and conical metal threads Can be subjected to
for hot water circuits in the heating field as well as oil and fuel oil and for all pressure very quickly
combustible gases such as butane, propane, natural gas and for compressed air. Enriched with PTFE
Temperature range: -30°C to +90°C, briefly up to 120°C
Pressure: After 15 min = 4 bar, after 2 hrs = 30 bar
Max. thread diameter: 2 inches
Polymerisation time: 1 – 3 hours
Max. thread play: 0,25mm
75ml bottle
05002
According to DIN EN 751-1 class H, DVGW-Reg.-No. NG-5146 BU 0219.
Productcatalogue 4
4. SANITARY EQUIPMENT
THREAD SEALS
dismantlable
PTFE tape easy and quickly applicable
not flammable and does not burn
PTFE thread sealing tape for metal threads
Application in all sanitary and heating circuits in the hot and cold no use-by date
water areas. DVGW tested. DIN EN 751-3 resistant against fungal attacks
Temperature range: -60°C to +260°C / Pressure: 20 bar does not swell up
FRp; DN < 10 / GRp: 10 < DN < 50
PTFE Goldenband
DVGW and BAM tested and approved, DIN EN 751-3, DIN 30660 KTW;
for natural gas, oxygene, lye, chemicals, oil, water, gasoline, and so on
Temperature range: -400°F to +500°F / -240°C to +260°C / Pressure: 30 bar
for oxygen: up to 60°C and 40 bar . Liquid and gaseous
FRp GRp GoldenBand
24010 24011 24012
dismantlable
PTFE pipe sealing thread easy and quickly applicable
not flammable and does not burn
FERMIT PTFE pipe sealing thread
• DIN-DVGW for gas and water installations according to EN751-3 FRp and GRp no use-by date
and DIN 30660 (NV-5143BP0261), tested & approved up to 100 bar pressure in resistant against fungal attacks
accordance with EN751-3 for gases of the 1st, 2nd and 3rd family and for hot water does not swell up
• DIN DVGW tested & approved for pipe adjustments up to 45°, for hot & cold & drinking for all types of threads out of
water in accordance with KTW recommendations of the German Health Ministry metal or plastic
• WRAS listed product for U.K. Water Regulations Advisory Scheme for use for solar installation
with hot and cold water (Ref. 0212515) with integrated cutter
• ASTM F423 Steam & Cold Water Cycle Test - passed no drying
• BAM tested & approved for use with gaseous oxygen at 30 bar and 100°C remains soft and pliable
(for use with the installation aid, II-2742/2004E)
• BAM tested & approved for use with liquid oxygen at 30 bar and 100°C
(use without installation aid, II-2742/2004E)
• UL Listed Seal Material 10BN File MH26734 according to Outline 1321 for use
in assemblies handling gasoline, petroleum oils, naphta, propane, butane,
benzene, kerosene and natural gas (<300 psig)
• KIWA GASTEC Qa (NL): norm. 31, class "20"
• Absolutely chemical resistant to most aggressive chemicals, solvents, fuels
and acids, completely resistant to surface fouling, oxidation, embrittlement,
fungal or bacterial growth, enzymatic or microbiological attack
Installation:
Beginning at the end of the thread, wrap in a overlapping haphazard
fashion in the direction of the thread, apply 2 or 3 drops of the installation aid
directly from the separate dispenser and smear over the PTFE with the finger,
concentrate at the end of the pipe and cover only 10 to 15 mm of the thread
The manufacturer`s guidelines on the number of wraps are:
1/2" pipe 12 (fine threads) to 18 (coarse threads) wraps
1 1/2" pipe 16 (fine threads) to 24 (coarse threads) wraps
for other pipe diameters adjust the number of wraps
Temperature range: -200°C to +240°C / Pressure: 30 bar
up to 100°C for oxygen, up to 100 bar for hot water
Thread sealing tape 175 m
24013
Productcatalogue 5
5. SANITARY EQUIPMENT
INSTALLATION PUTTIES
Permanently plastic
PLASTIC FERMIT – white Ductile
Economical
a permanently plastic sealing compound
Plastic-Fermit is a permanently plastic, kneadable sealant com- Can be worked quickly
pound based on plastic which meets the highest demands made on Does not become brittle
sanitary installation. Good adhesion power
Is particularly suitable for the insertion of drain valves in, for exam- Storable indefinitely
ple, washstands, baths and is suitable for hot and cold water.
Temperature range: 0°C to 120°C. Do not use for marble or other natural stone!
250g tin 500g tin 1kg tin 5kg bucket
06001 06002 06003 06004
Viscoplastic
AQUA FERMIT - red Easily kneadable
Strong adhesion power
Sealant and sleeve putty without hardening
Putty with strong adhesion power for washstands and water closet
Reliable - Safe
bowls as well as sewerage units or sleeves on buried lines.
Temperature range: 0°C to 100 °C
250g tin 500g tin 5kg bucket
07001 07002 07004
LUBRICANTS
Food-safe
GLISSA VALVE AND FITTING GREASE Non-dripping
Ductile
Non-dripping lubricating grease for hot and cold water valves and fittings.
Ductile, smooth, non-dripping lubricating grease for valves and fit- Reliable
tings, that with regard to food law is beyond reproach and is there-
fore also suitable for drinking water pipes. Can also be used for
machines and equipment where Glissa valve and fitting grease
comes into contact with food or drinking water.
Temperature range: -20°C to + 140°C.
60g tube 30g tube 14g tube
15001 15002 15003
In conformity with the KTW recommendations of the German Federal Health Office, is approved according to NSF-H 1 and to DIN 51502.
Synthetic
GLISSA ALLGAS VALVE GREASE Non-dripping
Ductile
High-grade lubricant for gas valves and fittings and actuators in
accordance with DIN EN 377. Suitable for gas valves and
fittings
Glissa all gas valve grease is resistant to all gases and gas mixtures
mentioned in DVGW worksheet G 260. It is also used for greasing
cock plugs or sealing elements such as membranes, packings or
elastomer seals etc.
Temperature range: up to 150°C
20g tube
15010
Corresponds to DIN DVGW 96.01e 1055
Productcatalogue 7
6. HEATING EQUIPMENT
REFRACTORY PRODUCTS
Easy to work with
FROSCHMARKE REFRACTORY BOILER PUTTY Asbestos-free
Non-shrinking
Sealing putty on potassium water glass basis.
Non-shrinking refractory boiler putty e.g. for sealing off from flue Seals well
gases during the use of boiler equipment, ovens and stoves. Adheres well to metal and
other materials
Temperature-resistance: more than +1000°C Non-crumbling
250g tin 500g tin 1kg tin 6kg bucket 20kg bucket 310ml cartridge
11001 11002 11003 11005 11006 11007
very good adhesiveness
REFRACTORY GLUE HT 1100 very high temperature resistance
no smoke development
Adhesive for fireproof construction units
Refractory glue HT 1100 is for sticking together fireproof construction easy to apply
units and for fastening of glass fibre or ceramic fibre sealing cords,
fireclay materials to metal parts, gluing of jacket tubes, sleeves and
other fireclay parts, setting fireclay bricks in stoves and heating units,
designed to adhere insulating board, ...
Temperature resistance: 1100°C
Colour: beige
Storage time: 24 months cool and dry in a closed packing
310ml cartridge 17ml tube
11301 11302
SEALANTS
Highly refractory
FERMITOPP HN 300 Odourless
Hot air-resistant
Highly refractory, neutral cross-linked
elastic single-package silicon sealant Reliable - Safe
Fermitopp SE 300 is used for sealing expansion joints on heating UV resistant
flues, ovens, reactors, chimneys, stacks, etc., also applicable in the colourfast
automotive sector.
Temperature range: -50°C to +250°C / Processing temperature: +5°C to +40°C
Skin formation: approx 10 min. / Time to complete cure: approx. 2 mm per day
Storage time: 12 months cool and dry
310ml cartridge red 310 ml cartridge black
16004 16005
Highly refractory
FERMITOPP HE 300 Hot air-resistant
Reliable - Safe
Highly refractory, acetic crosslinked sealant
elastic single-package silicon sealant UV resistant
Fermitopp SE 300 is used for sealing expansion joints on heating colourfast
flues, ovens, reactors, chimneys, stacks, etc., also applicable in the
automotive sector.
Temperature range: -50°C to +250°C (in spikes up to 300° C)
Processing temperature: +5°C to +40°C / Skin formation: approx 10 min.
Time to complete cure: approx. 2 mm per day / Storage time: 18 months cool and dry
310ml cartridge red
16013
Productcatalogue 10
7. HEATING EQUIPMENT
MAINTENANCE
Protection from rust
NIVO GRAPHITE PASTE – Flexoperm Highly refractory
Versatile
Highly refractory sealing paste for threaded and flanged joints
Prevents the sticking of gaskets, bolts, screws etc. which are expo- Reliable - Safe.
sed to intense heat. In the case of flange gaskets and surface seals,
coat both sides with the paste. In the case of use as sealants for
threads (DIN 2999) at over 160 degrees C, the use of aluminium
hemp with Nivo Graphite Paste is recommended as normal hemp
becomes scaly at these temperatures and then leaks can occur.
Temperature range: 0°C to +300°C
500g tin
13001
Low cost
3-D-SEALANT Versatile
Easy to use
Liquid sealant for small leaks.
3-D-SEALANT closes pores, cracks or damage to gaskets and seals on
heating boilers, radiators, pumps, cylinder blocks and car radiators from
the inside so that they are absolutely water and steam pressure-tight.
3-D-SEALANT is not suitable for the sealing of particularly narrow pas-
sages such as, for example, in the case of thermostat valves.
Input quantity: 1kg of 3-D-Sealant for 150 l of heating water
Preparation: thoroughly mix 1 kg of 3-D-Sealant with approx. 10 l of hot water
1kg bottle
14001
Productcatalogue 11