The BOFA Advantage PVC extraction system has been purposely designed to effectively deal with the extremely corrosive fumes that are generated when lasing PVC. Each unit is fitted with a specific HCL sensor as well as a general purpose VOC sensor to continually monitor the exhaust air of the unit. Automatic closed loop flow control comes as standard so consistent processing conditions are maintained. BOFA’s patent pending, Easi-Glide filter location mechanism makes filter change simple, quick and safe. •

1. advantage PvC
pvc
laser fume extraction systems
aDvantage
For the Laser Marking, Coding
and Engraving of PVC.
The BOFA Advantage PVC extraction system has been
purposely designed to effectively deal with the extremely
corrosive fumes that are generated when lasing PVC.
Each unit is fitted with a specific HCL sensor as well as a
general purpose VOC sensor to continually monitor the
exhaust air of the unit. Automatic closed loop flow control
comes as standard so consistent processing conditions
are maintained. BOFA’s patent pending, Easi-Glide filter
location mechanism makes filter change simple, quick
and safe.
• Blower with high airflow and pressure
• HCL and VOC gas sensors
• Automatic closed loop flow control
• Technically advanced stop/start interfaces to laser
pvc extraction system
part numbers
Model 24V Stop / Start Filter change / System failure signal Hose Kit*
ADPVC 230v L0952A A2001 A2002 A1020008
75-50mm
115v L0951A
* Other Hose Kits are available. All of the above units are fitted with our standard filter combinations. For specific applications
please call us for details.
replacement filters anD accessories*
Model Pre Filter Chemical pad filter Combined HEPA / Gas Filter Replacement HCL Sensor
ADPVC A1030081 A1030083 A1030082 A1070003
* Other Filters are available. Please call us for details.

2. pvc
technical Data
Model ADPVC
EC US
Dimensions (hxwxd) 1150 x 500 x 500mm 42.3 x 19.7 x 19.7”
Cabinet Construction Brushed stainless steel with epoxy coated internal Brushed stainless steel with epoxy coated internal
aDvantage
contact parts contact parts
Blower 1.1kw 325m3/hr 1.1kw 191cfm
Electronics 230v 1ph 50/60Hz Full load current 7.2 amps 115v 50/60Hz Full load current 14.4 amps
filter specifications filter specifications
pre filter combineD filter
Surface Media Area 2m² approx HEPA Filter Media Glass Fibre
Filter Media Construction 6 Pocket Bag Filter HEPA Media Maxi Fold Construction with Webbing
Construction Spacers
Filter Efficiency F8 (95% @ 0.8 microns)
Filter Efficiency H13 (99.997% @ 0.3 microns)
Activated Carbon Blend of impregnated activated carbons (37L)
pre filter Filter Housing Stainless steel
combineD filter
320mm
400mm
300mm
420mm
420mm
* Other Filters are available. Please call us for details. 400mm 400mm
airflow through filters technical specification
1 Unit/Filter ConditionDisplay- Automatic Closed Loop Flow Control
2 O n/Off Switch
3 Filter Housing Cam Latch
4 Extracted Ait Outlet
5 Hose Inlet Connection 75m m
6 Signal/ Interface Cable to Laser
7 Power Cable
8 Motor Cooling In/Out
2 1
3 6 8
Medium sized particulates
held in bag filter media. Contaminated air
Large particulate 7
fall to bottom of bag
INLET
Chemical filter pad
collects droplets 5
BAG FILTER
Small particulate
Full HEPA material used
held in HEPA filter
pvc extraction system
Full chemical layer used
OUTLET
COMBINED FILTER
4
SIDE FRONT BACK
advantage easi-glide
heaD office usa office
21-22 balena close bofa americas authoriseD agent
creeKmoor 1395 south hacKman street
inDustrial estate staunton,
poole, Dorset, uK illinois, usa
bh17 7Dx 62088
t. +44 (0) 1202 699 444 t. (618)-635-4465
f +44 (0) 1202 699 446
. f (618)-635-2695
.
e. sales@bofa.co.uK e. sales@bofaamericas.com
w. www.bofa.co.uK w. www.bofaamericas.com
bofa are DeDicateD to continuall improving our proDucts. therefore specifications may change without notice.
y