This document discusses various topics related to experimental stress analysis including measurement, instrumentation, photoelasticity, and non-destructive testing. It defines key terms, describes methods and principles, and discusses advantages and limitations. Specifically, it discusses the basic principles of measurement, requirements for accurate measurement, types of errors, static and dynamic characteristics of instruments, principles of photoelasticity, properties of photoelastic materials, and advantages of non-destructive testing techniques like radiography and brittle coating methods.
CONTENTS
Measurements
Significance of Measurement system
Fundamental methods of Measurement
The generalized measurement system
Definitions & basic concepts
Errors in Measurements
Sources of errors
Accuracy Precision
Resolution
Linearity
Hysteresis
Impedance loading
Introduction to Transducers
Classification of transducers
Capacitive
Inductive
Resistive
Electromagnetic
Piezoelectric
Photoconductive
Photovoltaic
After studying this chapter, the reader will be able to
• understand the importance of metrology
• appreciate the significance of inspection
• appreciate the concepts of accuracy and precision
• explain the objectives of metrology and measurements
• understand the general measurement concepts
• elucidate the different sources and types of errors
• compare the different types of measurements
Instruments for linear and angular measurements
EIM 7/8 Lesson 2: Perform Mensuration and CalculationBenandro Palor
LEARNING OUTCOMES:
* explain the basic concept of a system of measurement;
* perform measurement and calculation about electrical works;
* observe safety precautions in handling electrical measuring tools and instruments.
This Lesson Includes:
* System of Measurement
* Basic Unit Conversions
* The Multitester
* Resistance Reading
EXPERT SYSTEMS AND SOLUTIONS
Project Center For Research in Power Electronics and Power Systems
IEEE 2010 , IEEE 2011 BASED PROJECTS FOR FINAL YEAR STUDENTS OF B.E
Email: expertsyssol@gmail.com,
Cell: +919952749533, +918608603634
www.researchprojects.info
OMR, CHENNAI
IEEE based Projects For
Final year students of B.E in
EEE, ECE, EIE,CSE
M.E (Power Systems)
M.E (Applied Electronics)
M.E (Power Electronics)
Ph.D Electrical and Electronics.
Training
Students can assemble their hardware in our Research labs. Experts will be guiding the projects.
EXPERT GUIDANCE IN POWER SYSTEMS POWER ELECTRONICS
We provide guidance and codes for the for the following power systems areas.
1. Deregulated Systems,
2. Wind power Generation and Grid connection
3. Unit commitment
4. Economic Dispatch using AI methods
5. Voltage stability
6. FLC Control
7. Transformer Fault Identifications
8. SCADA - Power system Automation
we provide guidance and codes for the for the following power Electronics areas.
1. Three phase inverter and converters
2. Buck Boost Converter
3. Matrix Converter
4. Inverter and converter topologies
5. Fuzzy based control of Electric Drives.
6. Optimal design of Electrical Machines
7. BLDC and SR motor Drives
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Water billing management system project report.pdfKamal Acharya
Our project entitled “Water Billing Management System” aims is to generate Water bill with all the charges and penalty. Manual system that is employed is extremely laborious and quite inadequate. It only makes the process more difficult and hard.
The aim of our project is to develop a system that is meant to partially computerize the work performed in the Water Board like generating monthly Water bill, record of consuming unit of water, store record of the customer and previous unpaid record.
We used HTML/PHP as front end and MYSQL as back end for developing our project. HTML is primarily a visual design environment. We can create a android application by designing the form and that make up the user interface. Adding android application code to the form and the objects such as buttons and text boxes on them and adding any required support code in additional modular.
MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software. It is a stable ,reliable and the powerful solution with the advanced features and advantages which are as follows: Data Security.MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software.
More Related Content
Similar to Experimental Stress Analysis 2 Mark Q_A.docx
CONTENTS
Measurements
Significance of Measurement system
Fundamental methods of Measurement
The generalized measurement system
Definitions & basic concepts
Errors in Measurements
Sources of errors
Accuracy Precision
Resolution
Linearity
Hysteresis
Impedance loading
Introduction to Transducers
Classification of transducers
Capacitive
Inductive
Resistive
Electromagnetic
Piezoelectric
Photoconductive
Photovoltaic
After studying this chapter, the reader will be able to
• understand the importance of metrology
• appreciate the significance of inspection
• appreciate the concepts of accuracy and precision
• explain the objectives of metrology and measurements
• understand the general measurement concepts
• elucidate the different sources and types of errors
• compare the different types of measurements
Instruments for linear and angular measurements
EIM 7/8 Lesson 2: Perform Mensuration and CalculationBenandro Palor
LEARNING OUTCOMES:
* explain the basic concept of a system of measurement;
* perform measurement and calculation about electrical works;
* observe safety precautions in handling electrical measuring tools and instruments.
This Lesson Includes:
* System of Measurement
* Basic Unit Conversions
* The Multitester
* Resistance Reading
EXPERT SYSTEMS AND SOLUTIONS
Project Center For Research in Power Electronics and Power Systems
IEEE 2010 , IEEE 2011 BASED PROJECTS FOR FINAL YEAR STUDENTS OF B.E
Email: expertsyssol@gmail.com,
Cell: +919952749533, +918608603634
www.researchprojects.info
OMR, CHENNAI
IEEE based Projects For
Final year students of B.E in
EEE, ECE, EIE,CSE
M.E (Power Systems)
M.E (Applied Electronics)
M.E (Power Electronics)
Ph.D Electrical and Electronics.
Training
Students can assemble their hardware in our Research labs. Experts will be guiding the projects.
EXPERT GUIDANCE IN POWER SYSTEMS POWER ELECTRONICS
We provide guidance and codes for the for the following power systems areas.
1. Deregulated Systems,
2. Wind power Generation and Grid connection
3. Unit commitment
4. Economic Dispatch using AI methods
5. Voltage stability
6. FLC Control
7. Transformer Fault Identifications
8. SCADA - Power system Automation
we provide guidance and codes for the for the following power Electronics areas.
1. Three phase inverter and converters
2. Buck Boost Converter
3. Matrix Converter
4. Inverter and converter topologies
5. Fuzzy based control of Electric Drives.
6. Optimal design of Electrical Machines
7. BLDC and SR motor Drives
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Water billing management system project report.pdfKamal Acharya
Our project entitled “Water Billing Management System” aims is to generate Water bill with all the charges and penalty. Manual system that is employed is extremely laborious and quite inadequate. It only makes the process more difficult and hard.
The aim of our project is to develop a system that is meant to partially computerize the work performed in the Water Board like generating monthly Water bill, record of consuming unit of water, store record of the customer and previous unpaid record.
We used HTML/PHP as front end and MYSQL as back end for developing our project. HTML is primarily a visual design environment. We can create a android application by designing the form and that make up the user interface. Adding android application code to the form and the objects such as buttons and text boxes on them and adding any required support code in additional modular.
MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software. It is a stable ,reliable and the powerful solution with the advanced features and advantages which are as follows: Data Security.MySQL is free open source database that facilitates the effective management of the databases by connecting them to the software.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
An Approach to Detecting Writing Styles Based on Clustering Techniquesambekarshweta25
An Approach to Detecting Writing Styles Based on Clustering Techniques
Authors:
-Devkinandan Jagtap
-Shweta Ambekar
-Harshit Singh
-Nakul Sharma (Assistant Professor)
Institution:
VIIT Pune, India
Abstract:
This paper proposes a system to differentiate between human-generated and AI-generated texts using stylometric analysis. The system analyzes text files and classifies writing styles by employing various clustering algorithms, such as k-means, k-means++, hierarchical, and DBSCAN. The effectiveness of these algorithms is measured using silhouette scores. The system successfully identifies distinct writing styles within documents, demonstrating its potential for plagiarism detection.
Introduction:
Stylometry, the study of linguistic and structural features in texts, is used for tasks like plagiarism detection, genre separation, and author verification. This paper leverages stylometric analysis to identify different writing styles and improve plagiarism detection methods.
Methodology:
The system includes data collection, preprocessing, feature extraction, dimensional reduction, machine learning models for clustering, and performance comparison using silhouette scores. Feature extraction focuses on lexical features, vocabulary richness, and readability scores. The study uses a small dataset of texts from various authors and employs algorithms like k-means, k-means++, hierarchical clustering, and DBSCAN for clustering.
Results:
Experiments show that the system effectively identifies writing styles, with silhouette scores indicating reasonable to strong clustering when k=2. As the number of clusters increases, the silhouette scores decrease, indicating a drop in accuracy. K-means and k-means++ perform similarly, while hierarchical clustering is less optimized.
Conclusion and Future Work:
The system works well for distinguishing writing styles with two clusters but becomes less accurate as the number of clusters increases. Future research could focus on adding more parameters and optimizing the methodology to improve accuracy with higher cluster values. This system can enhance existing plagiarism detection tools, especially in academic settings.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Planning Of Procurement o different goods and services
Experimental Stress Analysis 2 Mark Q_A.docx
1. AE8605 Experimental Stress Analysis
Two Mark Questions
Unit I
1. Define Measurement:
The measurement of a given quantity is essentially an act or result of comparison between a quantity
whose magnitude (amount) is unknown, with a similar quantity whose magnitude (amount) is known, the
later quantity being called a standard.
2. What are the basic requirements for measurement?
(i) The standard used for comparison purposes must be accurately defined & should be commonly
acceptable.
(ii) The standard must be of the same character as the measure and (ie, the unknown quantity or the
quantity under measurement)
(iii) The apparatus used and the method accepted for the purposes of comparison must be provable.
3. What are the methods ofmeasurements?
(i) Direct Method: In these methods, MEASURAND is directly compared against a STANDARD.
(ii) Indirect Method: Measuring systems are used in indirect methods for measurement purposes
4. What is dimensional measurement?
Dimensional Measurements are characterized as determination of size of an object. These are the
measurements of dimensions of an object.
5. What are the ‘STANDARD’S for the measurement ofan angle?
The primary standards of angle may be taken either as angle subtended by a circle at its centre ie, 360° or
as angle between two straight line intersecting in a manner such that all four angles so formed are equal,
ie, each angle is 90°
6. Howwe can measure the Area ofsurvey plats?
Measurement of area of regular and standard geometrical figures can be obtained from the dimensions
using standard mathematical relationships.
There are many engineering applications which require the measurement of plane area. Graphical
determination of the area of survey plots form maps, the integration of function to determine the area
enclosed by a curve analysis of experimental data may require the use of measurement of plane area.
7. Give any two methods for measure an unknown force
An unknown force may be measured by the following methods,
1. Balancing the unknown force against the known gravitational force either directly
(or) indirectly using a system of levers.
2. 2. Transferring the unknown force to a fluid pressure and then meaning the resulting fluid pressure.
Hydraulic and Pneumatic load cells are used for transferring
the force into pressure.
8. Howwe can measure the temperature changes?
Temperature is not measured directly, but is measured through indirect means; change of temperature of a
substance causes a variety of effects. These effectsmay be physical, chemical, electrical (or) optical and
they may be used for the measurement of temperature through use of proper temperature sensing devices.
9. Tell something about ‘static characteristics’ and ‘static calibration’ in measurements:
Static characteristics’ of a measurement system are in generalthose that must be considered when the
system or instrument is used to measure a condition not varying with time. All the static performance
characteristics are obtained in one form or another by a process called’ static calibration’
10. What is accuracy and tell about point accuracy?
Accuracy is the closeness with which an instrument reading approaches the true value of the quantity
being measured. Thus accuracy of a measurement means conformity to truth.
‘Point Accuracy’ is the accuracy of the instrument only at one point on it scale.
11. Give the Type oferrors in measurements
(i) Gross errors (ii) Random errors (iii) systematic errors
- Instrumental errors
- Environmental errors
- Observational errors
12. Differentiate Gross error and Instrumental Error
Gross errors mainly cover human mistakes in reading instruments and recording and calculating
measurement results.
Instrumental Error occurs due to the wrong adjustments of a measuring devices while it construction or
misalignments of its pats.
13. Differentiate environmental and systematic errors
Environmental errors causes due to the surrounding condition of instruments, but systematic errors causes
because of the fault of the arrangement of measuring system during the whole measuring process.
14. What absolute static error? Give example
Absolute static error is the difference between measured values of quantity and the true value of quantity.
ie, Eo= X(m) - X(t)
Example: an error of 2mm is negligible when the length being measured is of the order of ( 1000 mm) 1
m but the same error of 12 mm may be considerable when the measurement of 10mm length.
15. What do you mean by limiting errors?
3. The limits of the deviations from the specified values of measurement data are defined as `Limiting
errors' (or) `Guarantee error'
16. Determine relative limiting error:
The relative error (fractional error) is defined as the ratio of the error to the specified magnitude (nominal
magnitude) of a quantity.
Relative limiting error A Limiting error
( Er) = =
As A Normal Value
17. What is an uncertainty in a measurement?
Uncertainty of measurement is a parameter associated with the result of measurement that characterizes
the dispersion of values that could be reasonably attributed to the measurand.
18. Define static sensitivity
The static sensitivity of an instrument or an instrumentation system is the ratio of the magnitude of the
output quantity to the magnitude of input) quantity being measured)
19. Define scale range:
The scale range of an instrument is defined as the difference between the largest and the smallest reading
of the instruments.
20. What is the frequency range in measurements?
Frequency range is defined as frequency over which measurements can be performed with a specified
degree of accuracy.
21. What is extensometer?
Extensometer is an instrument used top measure minute deformation of material while it is subjected to a
stress.
22. Classify the extensometers depending upon the magnification systems.
1. Mechanical Extensometers
2. Optical extensometers
3. Acoustical (Vibrating wire) extensometers
4. Electrical extensometers
5. Pneumatic extensometers.
23. What are the Basic Requirements ofextensometer?
1. Very high magnification-The magnification required is usually greater than 1000: 1
2. Sensitivity: The relation between input and output should not be affected by the reversalin the
direction of input and this requires that the movement should not have any friction.
4. 3. Low input force: The input force required to cause displacement should be extremely small thus there
is no defamation of the component due to the process of measurement.
24. Classify the mechanical extensometers depending upon the manner ofobtaining the
magnification.
1. Wedge magnification
2. Screw magnification
3. Compound magnification
4. Lever magnification
25. Give the disadvantagesofa simple mechanical lever magnification
For strain measurements on inner surfaces of small structures, the clearance may be in sufficient for the
gauge and all its auxiliary equipment.
26. Give the magnification capacity & gauge length ofHuggenBerger tensometer
The magnification may vary from 300 to 2000 depending upon the model. The gauge length varies from
12.5 to 25 mm.
27. Give the advantagesofscratch gauge
1. Compact in size
2. It can be attached to almost any surface with clamps or screws & adhesive bonding
3. It can measure scratch under all types of loading (static, shock, fatigue)
4. It can be used to record stress in all types of environments.
28. Tell something about the magnification capacity of Marten's extensometer
This instrument is extremely sensitive and by using telescope, regarding may be estimated to 1/10 mm
which corresponding to a length charge of approximately 0.0002m.
29. Give the classifications ofElectrical strain gauges
(a) inductance (or) magnetic strain gauges
(b) Electrical resistance strain gauges
(c) The capacitance strain gauges.
30. Howstrain can be measured by using Electrical strain gauges?
Electrical strain gauge is a device in which a change in length produces a change in some electrical
characteristics of the gauges.
31. Give the working principle ofinductance strain gauges?
An electrical inductance gauge is a device in which the mechanical quantity to be measured produced a
change in the magnetic field, and hence in the impedance of a current carrying coil.
32. Give the working principle ofeddy- current gauges
5. In this types of gauges the losses in the magnetic circuit are varied by changing the thickness or position
of the high- loss element inserted in the magnetic field.
33. What is known as foil strain gauges?
The foil strain gauge has metal foil photo- etched in a grid pattern of the electric insulator of the thin resin
and gauge leads attached.
34. What is the basic principle ofun-bonded metallic strain gauges
The principle of un-bonded metallic gauges is based on change in electrical resistance of a metallic wire
due to change in tension of the wire.
Unit -II
1. What is photo-etching?
Photo etching is the act of producing grid configuration on metal foil with the help of photo effect.
2. What is known as strip gauges?
The number of strain gauges are arranged in a particular manner is called strip gauges.
3. What is known as strain rosettes?
An arrangement of strain gauges in particular orientation or angle is known as strain rosettes
4. Give the quantities required for a good gauge material?
High gauge factor High resistance Low temperature sensitivity
High electrical stability Good corrosion resistance
High yield point stability
5. Give some arrangements ofstrain gauges to obtain strain rosettes
1. Two gauge rosette
2. Rectangular rosette
a) Three element b) Four element
3. Delta (or) Equiangular rosette
4. T. Delta rosette
6. What are the methods are available for computing the strain rosette data?
1. Analytical Solutions
2. Graphical Solutions
3. Semi ± graphical (or) vectorial layout method
4. Nomographic Solutions
5. Geometrical Computers.
7. Give the advantages ofstrain Rosette analysis.
(i)Extreme simplicity and speed of application. (ii)Possibility of allowing for transverse effects. (iii)No
requirements for additional equipments.
6. (iv) The possibility of training relativity unskilled persons to use the method.
8.Give the type ofstrain gauge circuits.
1. Wheat stone bridge circuits for static strain measurements.
2. Potentiometer circuits for dynamic strain measurements.
9. Define sensitivity ofpotentiometer:
Sensitivity of the potentiometer circuit is defined as the ratio of the output voltage divided by the strain.
UNIT III
1. Define Light
Light is usually defined as the electromagnetic radiation that can affect the human eye.
2. Define White light:
Light from a source that emits a continuous spectrum with equal energy for every wave length is called
white light.
3. Define monochromatic light:
Light of a single wave length is called monochromatic light. Example: sodium vapour lamp, Hg arc lamp.
4. What is wave front?
The focus of points on different radial lines from the source exhibiting the same disturbance at a given
instant of time, in a surface known as a wave front.
5. Define Ray?
A line normal to the wave front, indicating the direction of propagation of the waves is called a ray.
6. What are longitudinal waves?
The waves in which vibration are along the direction of their travel is known as longitudinal waves.
7. What are transverse waves?
Transverse waves are waves in which vibrations are perpendicular to the direction of wave travels.
8. What is polarized light?
The light having vibration only along a single straight line perpendicular to the direction of propagation of
light is said to be polarized.
9. What is plane of polarization?
The plane containing the direction of propogation of light, but containing no vibrations is called the plane
of polarization.
10. What are the methods are available to obtain plane polarized light?
(i) Refraction and Reflection for glass plate. (ii) By using Nichol Prism.
11. What are the disadvantages are available in Nichol prism when we use that to obtain plane
polarized light?
1. Costly
7. 2. Intensity is Poor.
12. What is the basic principle for photo elasticity?
When polarized light enters a loaded transparent component, it is split into two beams both beams travel
along the same path, but each vibrates along a principal direction and travels at a speed proportional to the
associated principal stress.
13. What is Refractive index?
The ratio of the velocity of light In air to the velocity in the medium is called the refractive index of the
medium and is denoted by `n' .
14. What do you mean by Polariscope?
Polariscope is an optical instrument that utilizes the properties of polarized light in its operation.
15. Give the types ofpolariscopes used in experimental stress analysis?
(i) Plane Polariscope
(ii) Circular Polariscope
16. Give the four different possible setups in circular polariscope?
Setup Polariser- Analyzer Quarter wave plates Field
1 Crossed Parallel Bright
2 Crossed Crossed Dark
3 Parallel Crossed Bright
4 Parallel Parallel Dark
17. What is known as isotropic point in a polariscope setup?
In a particular point in a stressed model where σ1= σ2 , that fringe order is zero and permanent block dots
appear at these points such are called isotropic points.
18. What are the properties ofphoto elastic materials?
1. Transparent to light used in the Polariscope.
2. Easily machinable by conventional means.
3. It should be force form residual stresses
4.They should have both mechanical and optical isotropy and homogeneity.
19. Give the mostcommonly used methods for compensation techniques
1. Babinet compensation method.
2. Babinet soleil compensation method
3. Tension or compression stop method.
8. 4. Tardy method of compensation.
5. Senarment method of compensation
6. Photometric method.
20. What are the techniques used to determine the stressesat the inner layers ofthe body in 3D
photo elasticity?
1. Locking in the stresses in the model
2. Multilayer reflection technique.
Unit - V
1. Define Non - destructive testing
Non ±destructive testing is a technique for revealing flaws and defects in a material or device without
damaging as destroying the test sample.
2. Give some advantages ofNDT:
1. Can be done directly on production items without regards to part cost or quantity available.
2. Can be done on 100% of production of on representative samples.
3. Give the limitations ofNDT:
1. Results often must be interpreted by a skilled technician.
2. In absence of contact with each other, different observers may disagree on meaning & significance of
test results.
4. Give the advantages ofRadiographic inspection.
- The ability to detect internal flows
- An ability to detect significant variations in composition.
- Permanent recording of raw inspection data.
5. Give some advantages ofBrittle coating method.
- Provides nearly whole field area
- Is non-destructive if the coating is sensitive enough.
- Is simple to analyze
6. Give some advantages by using fiber optic sensors.
- Light weight (very small in size)
- Low power requirement
- Resistant to electromagnetic interference
- High sensitivity