educational program sprayed hemp
•
0 likes•124 views
The document provides information on a teaching programme for sprayed insulating hemp-lime mix. The one-day training will cover: 1) Identifying safety rules and understanding the technical and practical properties of hemp, lime, and their use as insulating materials. 2) Demonstrations of mixing the materials, using tools and equipment to apply the insulating mix, and insulating a wall with sprayed lime and hemp. 3) Theoretical explanations and hands-on practice will take place at the training location using existing building walls. Safety and proper application techniques are emphasized.
Report
Share
Report
Share
Download to read offline
Recommended
Educational program hemp in all its forms
This one-day training program aims to raise awareness about building with hemp. It will cover the history, culture, and uses of hemp and lime as preferred binders. The teaching methods include theoretical presentations and practical demonstrations on implementing shuttered lime and hemp insulation, making finishing coats, and using lime and hemp for floors and roof insulation. The program is located in Riec sur Belon, France, and is supervised by Jean Pierre Andrieux for up to 12 participants.
Educational program wood structure, cellulose wadding and wood fibre insulation
This 12-day training program teaches eco-friendly insulation techniques using wood, lime, hemp and recycled materials. Trainees will learn how to frame timber structures, install insulation blocks, apply lime plaster coatings, and blow cellulose insulation to achieve an air-tight seal. The hands-on training will take place at a new timber frame construction site and be led by three specialized supervisors. Applications are being accepted for the February to June 2014 session, which will be held in Bain de Bretagne, France and support up to 12 trainees.
educational program hemp blocks and natural plasters
This document outlines a teaching programme for carrying out inside insulation work with lime and hemp on stone supports. The 19-day programme will take place from July to October 2013 in St Marc Le Blanc, France. It will teach participants how to properly prepare materials, implement safety procedures, protect worksites, assemble and apply insulation blocks and lime coatings, and tidy up upon completion. The training aims to teach relevant skills like safety compliance, math usage, and communication while promoting the use of environmentally friendly lime-hemp insulation materials and techniques.
educational program hemp blocks and lime plaster
This document outlines an insulation training program using lime and hemp. The program consists of 8 phases over 26 days from May to July 2013. Trainees will learn safety procedures, material preparation, insulating block assembly, applying lime-hemp coatings, and site cleanup. Skills taught include safety, math, communication, and applying an ecologically friendly insulation system. The training will take place in Bégard, France and costs are covered by the Libnam European project.
American lime technology sep. 15, 2010
U.S. Heritage Group was founded in 1997 to educate others about traditional masonry design and performance. They held their first lime mortar workshop at the U.S. Capitol in 1998 and have assisted numerous historic building restoration projects through on-site training, mortar testing, and custom blended repointing mortars. They also publish a magazine called Traditional Masonry for architects and building owners involved in historic masonry restoration.
Lime Projects Capabilities
LIME Projects is a multinational construction and engineering consultancy with over 200 years of experience globally and 70 years in Australia. They offer project management, design, and construction services across commercial, residential, infrastructure, and industrial sectors. LIME Projects has over 100 staff working across its four regional offices in Australasia, Europe, North America, and the Middle East. They have expertise in complex projects and delivering high quality results through innovation and professional project execution.
American lime tech business plan outline 082409
American Lime Technology aims to launch Hemcrete, a building material made from lime and hemp, in North America over 1-3 years. Its objectives in year one include supplying materials for 100 homes, establishing a North American hemp supply chain, conducting product testing, and developing educational programs. In three years, it aims to secure regional distributors, complete product certification, and have annual projects of 1,000 units. Key elements for success include developing local hemp sourcing and trained installers, while obstacles could include hemp regulations and varying building codes.
Straw Bale Construction: The Application in Massachusetts
This document summarizes research on the viability of straw bale construction in Massachusetts. Small-scale plastered straw bale specimens were tested for vapor permeability, thermal resistivity, and compression strength. Additionally, a two-story straw bale house was designed for Worcester following state building codes. Testing showed plastered straw bale walls can provide insulation and strength, and a cost analysis found straw bale construction can be economically comparable to conventional methods in Massachusetts. Therefore, the research determined straw bale is a viable alternative building technique.
Recommended
Educational program hemp in all its forms
This one-day training program aims to raise awareness about building with hemp. It will cover the history, culture, and uses of hemp and lime as preferred binders. The teaching methods include theoretical presentations and practical demonstrations on implementing shuttered lime and hemp insulation, making finishing coats, and using lime and hemp for floors and roof insulation. The program is located in Riec sur Belon, France, and is supervised by Jean Pierre Andrieux for up to 12 participants.
Educational program wood structure, cellulose wadding and wood fibre insulation
This 12-day training program teaches eco-friendly insulation techniques using wood, lime, hemp and recycled materials. Trainees will learn how to frame timber structures, install insulation blocks, apply lime plaster coatings, and blow cellulose insulation to achieve an air-tight seal. The hands-on training will take place at a new timber frame construction site and be led by three specialized supervisors. Applications are being accepted for the February to June 2014 session, which will be held in Bain de Bretagne, France and support up to 12 trainees.
educational program hemp blocks and natural plasters
This document outlines a teaching programme for carrying out inside insulation work with lime and hemp on stone supports. The 19-day programme will take place from July to October 2013 in St Marc Le Blanc, France. It will teach participants how to properly prepare materials, implement safety procedures, protect worksites, assemble and apply insulation blocks and lime coatings, and tidy up upon completion. The training aims to teach relevant skills like safety compliance, math usage, and communication while promoting the use of environmentally friendly lime-hemp insulation materials and techniques.
educational program hemp blocks and lime plaster
This document outlines an insulation training program using lime and hemp. The program consists of 8 phases over 26 days from May to July 2013. Trainees will learn safety procedures, material preparation, insulating block assembly, applying lime-hemp coatings, and site cleanup. Skills taught include safety, math, communication, and applying an ecologically friendly insulation system. The training will take place in Bégard, France and costs are covered by the Libnam European project.
American lime technology sep. 15, 2010
U.S. Heritage Group was founded in 1997 to educate others about traditional masonry design and performance. They held their first lime mortar workshop at the U.S. Capitol in 1998 and have assisted numerous historic building restoration projects through on-site training, mortar testing, and custom blended repointing mortars. They also publish a magazine called Traditional Masonry for architects and building owners involved in historic masonry restoration.
Lime Projects Capabilities
LIME Projects is a multinational construction and engineering consultancy with over 200 years of experience globally and 70 years in Australia. They offer project management, design, and construction services across commercial, residential, infrastructure, and industrial sectors. LIME Projects has over 100 staff working across its four regional offices in Australasia, Europe, North America, and the Middle East. They have expertise in complex projects and delivering high quality results through innovation and professional project execution.
American lime tech business plan outline 082409
American Lime Technology aims to launch Hemcrete, a building material made from lime and hemp, in North America over 1-3 years. Its objectives in year one include supplying materials for 100 homes, establishing a North American hemp supply chain, conducting product testing, and developing educational programs. In three years, it aims to secure regional distributors, complete product certification, and have annual projects of 1,000 units. Key elements for success include developing local hemp sourcing and trained installers, while obstacles could include hemp regulations and varying building codes.
Straw Bale Construction: The Application in Massachusetts
This document summarizes research on the viability of straw bale construction in Massachusetts. Small-scale plastered straw bale specimens were tested for vapor permeability, thermal resistivity, and compression strength. Additionally, a two-story straw bale house was designed for Worcester following state building codes. Testing showed plastered straw bale walls can provide insulation and strength, and a cost analysis found straw bale construction can be economically comparable to conventional methods in Massachusetts. Therefore, the research determined straw bale is a viable alternative building technique.
Hemcoat limeplastermethodsheet
The document provides instructions for mixing and applying HemcoatTM Hemp Lime Plaster. It describes mixing the plaster using either a small drum mixer or pan mixer, with specific proportions and mixing times for each. It then details a two-coat application process, explaining how to apply the first coat, apply and level the second coat, and finish the surface using troweling or texturing. Finally, it provides some notes on working conditions and variations that may be encountered.
Litd 2600 winter 2010 newsletter3
The document summarizes several projects that have used Tradical® Hemcrete®, an innovative hemp and lime wall system, as well as other products from Lime Technology. It describes a new housing development in Swindon that will use Tradical® Hemcrete® to construct 12 new homes to meet high sustainability standards. It also mentions Lime Technology's acquisition of a hemp business and the harvesting of over 3,000 acres of hemp to use in its wall systems and insulation products.
Hemcrete testing evaluation usa
E84 Surface Burning Characteristics test measures the flame spread and smoke developed indexes of building materials when exposed to open flame. The test exposes a 24 ft by 20 in specimen to a controlled air flow and flaming fire to measure how flame spreads along the surface. This test provides only comparative measurements of surface flame spread and smoke density to red oak and cement board, and does not classify a material as noncombustible or measure heat transmission. Proper specimen size and method of support must be followed according to ASTM E84 guidelines.
Nh data shts 11 17-10
This document contains details and specifications for three different residential wall systems:
1) A standard 2x6 wood frame wall with fiber cement board siding that is 7 inches thick and has an R-value of 18.1.
2) A standard 2x6 wood frame wall with brick veneer that is 11.5 inches thick and has an R-value of 17.5.
3) A standard CMU (concrete masonry unit) wall with stucco exterior that is 10.75 inches thick and has an R-value of 6.5.
Implementer's Guide to Lime Stabilization for Septage Management in the Phili...
Here are the key points about who this manual is for:
- The manual is intended for implementers of septage management programs, such as local government staff, water service providers, and disaster preparedness specialists.
- The implementer may be tasked by the mayor with setting up a septage management program for a city or municipality.
- Water districts are also a target audience as they are mandated to provide sanitation services.
- The manual can aid those responsible for managing fecal sludge and septage following natural or man-made disasters.
- It also provides guidance for private sector entities interested in septage collection or treatment services.
- The self-test questions help determine how advanced the
Training portfolio lime and hemp renders and plasters - LOUDEAC June - July -...
This document is a training portfolio for a course on applying insulating hemp and lime renders and plasters. It includes:
1) An overview of the training activities performed by the trainee, such as organizing the work site, preparing materials, and applying the insulating coating.
2) A list of the knowledge acquired by the trainee, including the properties of lime and hemp, material dosages, and coating requirements.
3) A description of general expertise developed, like working at height, teamwork, and using equipment like a concrete mixer and masonry tools safely.
The portfolio is intended to document the trainee's activities and learning for reference in obtaining future work.
Photos log hemp blocks and lime plaster - Le Palacret May-June 2013
The document describes a training session in May-June 2013 at Le Palacret involving techniques for building with hemp and lime. Various participants are shown pouring foundations, delivering and laying blocks, installing plumbing and electrical grids, plastering, applying roughcast and finishing coats to the walls. The training covered theoretical aspects and hands-on skills like mixing mortar, cutting blocks, plastering around windows, and applying different coats.
Prefabricated hempcrete specification and installation manual 2015 by studi...
Prefabricated Hempcrete Product Specification and Construction Manual developed by Studio Green Pte Ltd
Lime stabilized construction: a manual and practical guide
A culmination of three years work in Pakistan to develop skills and knowledge in building flood resistant shelters with lime as the key stabilising ingredient. Thanks to Bee Rowan founder of Strawbuild UK and Stafford Holmes, lime master and consultant for their work to develop this. Illustrations by Julliette (in England) and to IOM for really nice layout, editing and design of the book. This is a really valuable piece of work - but if you want to undertake a similar programme it definitely makes sense to bring in technical consultants like Bee and Stafford to help guide the process.
Hemp final
The document outlines the Hazard and Effects Management Program (HEMP) which is a structured process for identifying and managing hazards and their potential effects through 6 steps: 1) identifying hazards, 2) assessing risks, 3) developing controls, 4) determining if risk is as low as reasonably practicable, 5) planning recovery, and 6) recording the process; the goal of HEMP is to reduce risks to assets, people, the environment and reputation.
Educational program straw bale testing
The document summarizes a 1-day training program on straw bale testing before construction site implementation. The program will be held on September 10, 2014 from 1:30-5:00 pm in Romagné, France. The training will introduce participants to the features and properties of straw as a building material, professional construction rules for straw buildings, necessary tools, and how to organize, size, weigh, test moisture levels of, and check straw bales for weevils before implementation on a construction site. The technical supervision costs will be supported by the Libnam European interreg project. Participants should register by contacting the listed phone number.
education program making a cob lift
This document provides information about a 2-day teaching program on making a cob lift. The program will teach participants how to identify suitable soil features, perform soil tests, add materials like straw, prepare the work site, implement the first cob lift, and use tools. The training is designed for those interested in eco-construction and masonry. It will be held on March 11 and May 21, 2014 and cover topics like introducing earth as a building material, using tools, and making two cob lifts, with the second using mechanized tools. Participants should register by contacting Typhaine Lesselingue.
Maison neuve holiday cottage-en
This project renovated an old bakery in rural France into an eco-friendly holiday cottage. The renovation included preserving elements of the original building while adding an extension using sustainable materials. The goals were to create accessible lodging for disadvantaged groups and experiment with green building techniques. Challenges included using new materials and an integrated design process, but the project improved skills of those involved and achieved good airtightness.
Programme study visit september 2014 hemp and straw - bretagne
This document outlines the itinerary and activities for a study visit organized by the LIBNAM project in Brittany, France from September 23-25, 2014. Fifteen English participants will tour natural building sites, learn about hemp cultivation and uses from a local expert, and participate in hands-on workshops constructing lime-hemp walls. The goal is to support businesses in adopting more sustainable and energy efficient natural materials and construction techniques. Sites visited include a renovated home with sprayed hemp-lime render in Moelan-sur-Mer, a passive house with shuttered hemp-lime walls in Loudéac, and a workshop on lime-hemp wall construction with Technichanvre in Riec
Programme study's visits may 2014 earth, straw, wadding - bretagne
This document provides details of a study visit organized by the European LIBNAM project. The visit will take place from May 20-22, 2014 in Brittany, France and will include visits to various natural building sites, demonstrations, and presentations. Approximately 15-20 participants from building industry professionals are expected to attend. The itinerary details the locations to be visited each day, including a cellulose factory, straw bale buildings, and earth building workshops. Participants will stay in dormitories and have their travel expenses covered, but will pay for their own meals.
Refratechnik Training Center | A Value-Added Service for our Customers in Asia
Detailed knowledge about refractory materials as well as optimized installation methods are crucial for the operation of cement and lime kilns. Therefore it is important that the personnel involved in refractory linings can rely on a broad knowledge related to refractories.
educational program cob, lime and straw
The document outlines a teaching programme to introduce students to traditional building methods using cob, lime mortars, and stonework. Over the course of several sessions, students will learn skills like mixing and applying cob, lime plastering, stone masonry, and lime washing. They will build a block base and cob oven, applying cob by hand and plastering with lime mortars on lath and block backgrounds. Students will also learn to set stone walls using string lines and lay a brick arch. The goal is for students to gain hands-on experience with traditional building techniques using natural materials.
Mellé-en
This document summarizes the renovation of a 17th century heritage building in Mellé, France into an eco-housing demonstration. The renovation combined energy efficiency, use of natural materials, and local expertise. Various insulation techniques were used on different walls, including interior lime-hemp brick, exterior wood fiber, and a timber frame. Ground floor insulation addressed radon risks. The project cost over £110,000 and achieved an air change rate of 0.73 m3/h.m2. It serves as an educational tool to showcase sustainable renovation of heritage structures.
Demonstration action specifications
This document outlines plans for demonstration projects, educational worksheets, and a teaching program for the LIBNAM project. It specifies that 7 demonstration projects will be carried out in both France and England to showcase insulation techniques using natural materials and performance testing. These demonstrations will result in a photographic record, educational program, and 3-4 educational worksheets. The worksheets and program will focus on step-by-step implementation of materials, use of performance tools, and design software. Organizers in both countries will coordinate the bilingual demonstrations and associated educational materials.
How to increase the interest of Engineering among students
This document describes a proposed activity to increase students' interest in engineering. The activity involves students ages 19-22 building remotely operated underwater robots over 2.5 days. Students would work with university faculty experts in a fully equipped lab. They would build low-cost robot prototypes out of materials like PVC pipes. The activity aims to introduce students to engineering concepts and tools in a hands-on way to make the field more appealing and understandable. It would take place at a university that has facilities for robot building and testing, like a swimming pool.
Lesson Plan 1&2 Gr 5 Natural Sciences and Technology T2 W8-1.pdf
This lesson plan focuses on traditional processing methods. It will teach students about how various materials have been processed for hundreds of years in Africa to make useful objects like clay pots, bricks, baskets, hats and thatched roofs from plant fibers. The lesson will include showing a video on basket making and explaining various traditional processing techniques. Students will learn terminology like coil, weave, stitch and plait. They will investigate traditionally processed materials and their properties. The goal is for students to understand how processing makes materials more useful.
Catalogo Lastra y Zorrilla.pdf
LASTRA & ZORRILLA specializes in tensile architecture projects using textiles. They have over 50 years of experience developing unique tensile structures worldwide, completing over 150 projects in Spain and 25 internationally. Their services include design, manufacturing, installation, and maintenance of tensile architecture projects using innovative materials like ETFE, PVC, and cable networks.
More Related Content
Viewers also liked
Hemcoat limeplastermethodsheet
The document provides instructions for mixing and applying HemcoatTM Hemp Lime Plaster. It describes mixing the plaster using either a small drum mixer or pan mixer, with specific proportions and mixing times for each. It then details a two-coat application process, explaining how to apply the first coat, apply and level the second coat, and finish the surface using troweling or texturing. Finally, it provides some notes on working conditions and variations that may be encountered.
Litd 2600 winter 2010 newsletter3
The document summarizes several projects that have used Tradical® Hemcrete®, an innovative hemp and lime wall system, as well as other products from Lime Technology. It describes a new housing development in Swindon that will use Tradical® Hemcrete® to construct 12 new homes to meet high sustainability standards. It also mentions Lime Technology's acquisition of a hemp business and the harvesting of over 3,000 acres of hemp to use in its wall systems and insulation products.
Hemcrete testing evaluation usa
E84 Surface Burning Characteristics test measures the flame spread and smoke developed indexes of building materials when exposed to open flame. The test exposes a 24 ft by 20 in specimen to a controlled air flow and flaming fire to measure how flame spreads along the surface. This test provides only comparative measurements of surface flame spread and smoke density to red oak and cement board, and does not classify a material as noncombustible or measure heat transmission. Proper specimen size and method of support must be followed according to ASTM E84 guidelines.
Nh data shts 11 17-10
This document contains details and specifications for three different residential wall systems:
1) A standard 2x6 wood frame wall with fiber cement board siding that is 7 inches thick and has an R-value of 18.1.
2) A standard 2x6 wood frame wall with brick veneer that is 11.5 inches thick and has an R-value of 17.5.
3) A standard CMU (concrete masonry unit) wall with stucco exterior that is 10.75 inches thick and has an R-value of 6.5.
Implementer's Guide to Lime Stabilization for Septage Management in the Phili...
Here are the key points about who this manual is for:
- The manual is intended for implementers of septage management programs, such as local government staff, water service providers, and disaster preparedness specialists.
- The implementer may be tasked by the mayor with setting up a septage management program for a city or municipality.
- Water districts are also a target audience as they are mandated to provide sanitation services.
- The manual can aid those responsible for managing fecal sludge and septage following natural or man-made disasters.
- It also provides guidance for private sector entities interested in septage collection or treatment services.
- The self-test questions help determine how advanced the
Training portfolio lime and hemp renders and plasters - LOUDEAC June - July -...
This document is a training portfolio for a course on applying insulating hemp and lime renders and plasters. It includes:
1) An overview of the training activities performed by the trainee, such as organizing the work site, preparing materials, and applying the insulating coating.
2) A list of the knowledge acquired by the trainee, including the properties of lime and hemp, material dosages, and coating requirements.
3) A description of general expertise developed, like working at height, teamwork, and using equipment like a concrete mixer and masonry tools safely.
The portfolio is intended to document the trainee's activities and learning for reference in obtaining future work.
Photos log hemp blocks and lime plaster - Le Palacret May-June 2013
The document describes a training session in May-June 2013 at Le Palacret involving techniques for building with hemp and lime. Various participants are shown pouring foundations, delivering and laying blocks, installing plumbing and electrical grids, plastering, applying roughcast and finishing coats to the walls. The training covered theoretical aspects and hands-on skills like mixing mortar, cutting blocks, plastering around windows, and applying different coats.
Prefabricated hempcrete specification and installation manual 2015 by studi...
Prefabricated Hempcrete Product Specification and Construction Manual developed by Studio Green Pte Ltd
Lime stabilized construction: a manual and practical guide
A culmination of three years work in Pakistan to develop skills and knowledge in building flood resistant shelters with lime as the key stabilising ingredient. Thanks to Bee Rowan founder of Strawbuild UK and Stafford Holmes, lime master and consultant for their work to develop this. Illustrations by Julliette (in England) and to IOM for really nice layout, editing and design of the book. This is a really valuable piece of work - but if you want to undertake a similar programme it definitely makes sense to bring in technical consultants like Bee and Stafford to help guide the process.
Hemp final
The document outlines the Hazard and Effects Management Program (HEMP) which is a structured process for identifying and managing hazards and their potential effects through 6 steps: 1) identifying hazards, 2) assessing risks, 3) developing controls, 4) determining if risk is as low as reasonably practicable, 5) planning recovery, and 6) recording the process; the goal of HEMP is to reduce risks to assets, people, the environment and reputation.
Viewers also liked (10)
Implementer's Guide to Lime Stabilization for Septage Management in the Phili...
Implementer's Guide to Lime Stabilization for Septage Management in the Phili...
Training portfolio lime and hemp renders and plasters - LOUDEAC June - July -...
Training portfolio lime and hemp renders and plasters - LOUDEAC June - July -...
Photos log hemp blocks and lime plaster - Le Palacret May-June 2013
Photos log hemp blocks and lime plaster - Le Palacret May-June 2013
Prefabricated hempcrete specification and installation manual 2015 by studi...
Prefabricated hempcrete specification and installation manual 2015 by studi...
Lime stabilized construction: a manual and practical guide
Lime stabilized construction: a manual and practical guide
Similar to educational program sprayed hemp
Educational program straw bale testing
The document summarizes a 1-day training program on straw bale testing before construction site implementation. The program will be held on September 10, 2014 from 1:30-5:00 pm in Romagné, France. The training will introduce participants to the features and properties of straw as a building material, professional construction rules for straw buildings, necessary tools, and how to organize, size, weigh, test moisture levels of, and check straw bales for weevils before implementation on a construction site. The technical supervision costs will be supported by the Libnam European interreg project. Participants should register by contacting the listed phone number.
education program making a cob lift
This document provides information about a 2-day teaching program on making a cob lift. The program will teach participants how to identify suitable soil features, perform soil tests, add materials like straw, prepare the work site, implement the first cob lift, and use tools. The training is designed for those interested in eco-construction and masonry. It will be held on March 11 and May 21, 2014 and cover topics like introducing earth as a building material, using tools, and making two cob lifts, with the second using mechanized tools. Participants should register by contacting Typhaine Lesselingue.
Maison neuve holiday cottage-en
This project renovated an old bakery in rural France into an eco-friendly holiday cottage. The renovation included preserving elements of the original building while adding an extension using sustainable materials. The goals were to create accessible lodging for disadvantaged groups and experiment with green building techniques. Challenges included using new materials and an integrated design process, but the project improved skills of those involved and achieved good airtightness.
Programme study visit september 2014 hemp and straw - bretagne
This document outlines the itinerary and activities for a study visit organized by the LIBNAM project in Brittany, France from September 23-25, 2014. Fifteen English participants will tour natural building sites, learn about hemp cultivation and uses from a local expert, and participate in hands-on workshops constructing lime-hemp walls. The goal is to support businesses in adopting more sustainable and energy efficient natural materials and construction techniques. Sites visited include a renovated home with sprayed hemp-lime render in Moelan-sur-Mer, a passive house with shuttered hemp-lime walls in Loudéac, and a workshop on lime-hemp wall construction with Technichanvre in Riec
Programme study's visits may 2014 earth, straw, wadding - bretagne
This document provides details of a study visit organized by the European LIBNAM project. The visit will take place from May 20-22, 2014 in Brittany, France and will include visits to various natural building sites, demonstrations, and presentations. Approximately 15-20 participants from building industry professionals are expected to attend. The itinerary details the locations to be visited each day, including a cellulose factory, straw bale buildings, and earth building workshops. Participants will stay in dormitories and have their travel expenses covered, but will pay for their own meals.
Refratechnik Training Center | A Value-Added Service for our Customers in Asia
Detailed knowledge about refractory materials as well as optimized installation methods are crucial for the operation of cement and lime kilns. Therefore it is important that the personnel involved in refractory linings can rely on a broad knowledge related to refractories.
educational program cob, lime and straw
The document outlines a teaching programme to introduce students to traditional building methods using cob, lime mortars, and stonework. Over the course of several sessions, students will learn skills like mixing and applying cob, lime plastering, stone masonry, and lime washing. They will build a block base and cob oven, applying cob by hand and plastering with lime mortars on lath and block backgrounds. Students will also learn to set stone walls using string lines and lay a brick arch. The goal is for students to gain hands-on experience with traditional building techniques using natural materials.
Mellé-en
This document summarizes the renovation of a 17th century heritage building in Mellé, France into an eco-housing demonstration. The renovation combined energy efficiency, use of natural materials, and local expertise. Various insulation techniques were used on different walls, including interior lime-hemp brick, exterior wood fiber, and a timber frame. Ground floor insulation addressed radon risks. The project cost over £110,000 and achieved an air change rate of 0.73 m3/h.m2. It serves as an educational tool to showcase sustainable renovation of heritage structures.
Demonstration action specifications
This document outlines plans for demonstration projects, educational worksheets, and a teaching program for the LIBNAM project. It specifies that 7 demonstration projects will be carried out in both France and England to showcase insulation techniques using natural materials and performance testing. These demonstrations will result in a photographic record, educational program, and 3-4 educational worksheets. The worksheets and program will focus on step-by-step implementation of materials, use of performance tools, and design software. Organizers in both countries will coordinate the bilingual demonstrations and associated educational materials.
How to increase the interest of Engineering among students
This document describes a proposed activity to increase students' interest in engineering. The activity involves students ages 19-22 building remotely operated underwater robots over 2.5 days. Students would work with university faculty experts in a fully equipped lab. They would build low-cost robot prototypes out of materials like PVC pipes. The activity aims to introduce students to engineering concepts and tools in a hands-on way to make the field more appealing and understandable. It would take place at a university that has facilities for robot building and testing, like a swimming pool.
Lesson Plan 1&2 Gr 5 Natural Sciences and Technology T2 W8-1.pdf
This lesson plan focuses on traditional processing methods. It will teach students about how various materials have been processed for hundreds of years in Africa to make useful objects like clay pots, bricks, baskets, hats and thatched roofs from plant fibers. The lesson will include showing a video on basket making and explaining various traditional processing techniques. Students will learn terminology like coil, weave, stitch and plait. They will investigate traditionally processed materials and their properties. The goal is for students to understand how processing makes materials more useful.
Catalogo Lastra y Zorrilla.pdf
LASTRA & ZORRILLA specializes in tensile architecture projects using textiles. They have over 50 years of experience developing unique tensile structures worldwide, completing over 150 projects in Spain and 25 internationally. Their services include design, manufacturing, installation, and maintenance of tensile architecture projects using innovative materials like ETFE, PVC, and cable networks.
Muël en
The town council built a nursery out of straw, wood, and clay materials to provide high air quality. Volunteers helped construct the straw walls and earth rendering. While more expensive initially, the natural materials provide better indoor air quality and lower heating costs than conventional buildings. The nursery accommodates 12 children with sustainable features like a pellet stove, solar panels, and rainwater collection.
Sirris Materials Day 2010 - Wrap up summary
The document outlines the program for the Sirris Materials Day 2010 event. It includes an opening and introduction, three interactive workshop sessions on composite materials, smart materials and sustainable investments, a keynote speech, and closing session. The workshops explore challenges and opportunities regarding surface preparation of composites, powder coating of composites, using composites in sun shields, using steel fibers as composite reinforcement, and more. Major themes from the smart materials workshop include evaluating new materials' applications, processing considerations, and supporting innovation. The sustainable materials workshop discusses success factors, looking beyond business models, and tools for sustainable material selection.
NAFIGATE Corporation - Company Presentation - Updated
NAFIGATE Corporation develops international markets for nanofibers. It creates a Global Innovation Center for Nanofiber Application that brings together world-class experts and companies. The Center is based on cooperation, strong personal relationships with experts, and a focus on business. NAFIGATE has partnerships with numerous universities and companies around the world to develop new nanofiber applications in areas like filtration, energy storage, biotechnology and more.
Richard Gagnier Masterclass
The document discusses tools and principles for preserving time-based media artworks. It introduces Richard Gagnier, head of conservation at the Montreal Museum of Fine Arts, and the goals of the DOCAM research alliance to develop new tools and methodologies for conserving and documenting artistic works involving media technologies. Key challenges addressed are the obsolescence of technologies and ensuring the long-term support and lifespan of the works' content and related equipment. The concepts of migration and emulation as approaches to preservation are defined. Factors to consider for the integrity of an artwork in relation to display equipment are also outlined.
Lighting Desing Workshop programme eme3 en
The Lighting Design Workshop @Eme3 2013 proposes an inmersive experience in the development of a lighting design practice: A hands-on workshop applied to an inspiring context: the former industrial complex of Fabra i Coats in Barcelona.
Stara zagora, final side event
The document summarizes an Italian project called Ree_trofit that aimed to address the shortage of qualified building retrofitting experts. It describes the project partners and funding, which sought to define best practices for training and carry out vocational training programs in multiple countries. Statistics are provided on the success of the Italian training batches, which saw improvements based on feedback. Additionally, the Laboratory for Sustainable Building program is outlined as a follow up project providing specialized courses on topics like energy performance and materials to further skills in the construction industry. The Lucca Chamber of Commerce best practice highlights the goals and facilities of the Lucca Technological Park for supporting innovative businesses through incubation spaces and collaboration between universities and enterprises.
Education center le picaou en
The project involved renovating an old rectory into an elementary school, maintaining the original architectural identity. The architect designed an extension within the limits of the existing courtyard and garden. Local materials like stone, wood, lime-hemp blocks and renders were used to give a contemporary feel while respecting the heritage of the area. The renovated building achieved an air permeability rate of 7.67 vol/h, higher than targeted due to openings needed for accessibility, and is expected to reduce CO2 emissions significantly compared to the previous heating system.
Ifla October 2009
A flood occurred at the National Library of Scotland on February 26, 2009 when a sprinkler pipe burst, releasing approximately 25,000 litres of water. Around 4,000 books and thousands of manuscript items were affected. Conservation treatment was required for 516 items. Toxic mold was later discovered in one area and specialist remediation was required. The total estimated cost of the flood, including collection damage, building repairs, consultants and lost revenue, was around £250,000. Lessons were learned around disaster preparedness and response.
Similar to educational program sprayed hemp (20)
Programme study visit september 2014 hemp and straw - bretagne
Programme study visit september 2014 hemp and straw - bretagne
Programme study's visits may 2014 earth, straw, wadding - bretagne
Programme study's visits may 2014 earth, straw, wadding - bretagne
Refratechnik Training Center | A Value-Added Service for our Customers in Asia
Refratechnik Training Center | A Value-Added Service for our Customers in Asia
How to increase the interest of Engineering among students
How to increase the interest of Engineering among students
Lesson Plan 1&2 Gr 5 Natural Sciences and Technology T2 W8-1.pdf
Lesson Plan 1&2 Gr 5 Natural Sciences and Technology T2 W8-1.pdf
NAFIGATE Corporation - Company Presentation - Updated
NAFIGATE Corporation - Company Presentation - Updated
More from libnam
Booklet supporting methods sustainable construction
This document discusses sustainable construction methods and examples in France and the UK. It outlines the thermal regulations in both countries implemented in response to the European Energy Performance of Buildings Directive. Examples of eco-construction using natural materials are provided for France, while the UK focuses on supporting professionals to meet thermal regulations. Various methods for supporting sustainable construction are described, including group animation, promotion and communication, monitoring and information sharing, and individual/group support. Case studies from both countries are given for each method.
Livret méthodologies d'accompagnement construction durable
Livret méthodologies d'accompagnement construction durable
Booklet two integrated building designs
The document summarizes two integrated building design projects - ECOBATYS in France and the Green Build Hub in England. ECOBATYS will serve as an educational center for eco-renovation, research, and training local businesses. The Green Build Hub will be a 'living laboratory' to test and monitor eco-building products and serve as a training center located at the Eden Project in Cornwall, England. Both projects used new design methodologies - Integrated Design Process for ECOBATYS and Building Information Modeling for the Green Build Hub - to facilitate sustainable building with low environmental impact while controlling costs.
Educational sheet hqe
The HEQ initiative aims to improve comfort in building construction and use through a global cost approach considering financial and environmental impacts from design through end of life. It is based on two parts: an operation management system to assess environmental management and a quality repository to evaluate architectural and technical performance. HEQ is a trademark validated by AFNOR certification inspired by energy performance labels with additional health, hydrological and plant dimensions. Some professionals prefer alternative standards like BREEAM due to criticisms of HEQ's lack of transparency and advocacy for industry interests.
educational sheet breeam
BREEAM (Building Research Establishment Environmental Assessment Method) is a sustainability assessment method for buildings. It evaluates a building's environmental performance based on nine criteria including energy use, water use, health and well-being, materials, waste management and more. Buildings are rated on a scale of unclassified to outstanding. Over 300,000 buildings have received BREEAM certification since 1990. BREEAM aims to mitigate environmental impacts, stimulate sustainable building demand, improve efficiencies and provide market recognition for sustainable achievements.
Educational sheet rt 2020
The RT 2020 aims to develop positive energy buildings (BEPOS) that produce more energy annually than they consume. It is a goal-oriented regulation that provides design freedom while reducing energy usage. Differences from the RT 2012 include considering additional energy consumption areas like household appliances and the embodied energy of materials. The RT 2020 also places more emphasis on individual behavior change through education to consume less energy efficiently. It further considers occupant well-being by anticipating indoor air quality and sound insulation through appropriate building materials.
Thermal regulation 2013 in england
The document provides information on thermal regulations in England, including details on Part L of the Building Regulations which specify energy efficiency requirements. It outlines the approved documents that contain technical guidance, such as L1A, L1B, L2A and L2B. The regulations require certain maximum U-values be achieved for insulation depending on the type and location of the building and construction element (e.g. wall, floor, roof). U-values measure heat loss and insulation performance, with lower values indicating better insulation. The regulations and guidance on U-values can be found on the Planning Portal website.
En tool 4 educational sheet thermal regulation in england
The document provides information on thermal regulations in England, including details on Part L of the Building Regulations which specify energy efficiency requirements. It outlines the approved documents that contain technical guidance, including L1A, L1B, L2A and L2B. The regulations require certain maximum U-values be achieved for insulation depending on the type and location of the building and construction element (wall, floor, roof). U-values measure heat loss and insulation performance, with lower values indicating better insulation. The regulations also reference tools like SAP and SBEM used to assess energy efficiency during design and for approvals.
Fr outil 1 fiche enquête vierge livret études de cas
Fr outil 1 fiche enquête vierge livret études de cas
En tool 1 blank survey data sheet case studies booklet
This document is a survey about a technical case study of a construction project. It requests information over multiple pages about project details like location, objectives, materials used, construction techniques, challenges encountered, training provided, performance and costs. Specifics requested include building system choices, foundation and structure types, materials present on site, energy and water management strategies, and obstacles and lessons learned during construction.
Fr outil 7 compte rendu photos ossature bois, ouate de cellulose et laine de ...
Ossature bois, ouate de cellulose et laine de bois
More from libnam (20)
Booklet supporting methods sustainable construction
Booklet supporting methods sustainable construction
Livret méthodologies d'accompagnement construction durable
Livret méthodologies d'accompagnement construction durable
En tool 4 educational sheet thermal regulation in england
En tool 4 educational sheet thermal regulation in england
Fr outil 1 fiche enquête vierge livret études de cas
Fr outil 1 fiche enquête vierge livret études de cas
En tool 1 blank survey data sheet case studies booklet
En tool 1 blank survey data sheet case studies booklet
Fr outil 7 compte rendu photos tests bottes de paille
Fr outil 7 compte rendu photos tests bottes de paille
Fr outil 7 compte rendu photos terre bauge mécanisée btc torchis
Fr outil 7 compte rendu photos terre bauge mécanisée btc torchis
Fr outil 7 compte rendu photos ossature bois, ouate de cellulose et laine de ...
Fr outil 7 compte rendu photos ossature bois, ouate de cellulose et laine de ...
Fr outil 7 compte rendu photos isolation terre paille
Fr outil 7 compte rendu photos isolation terre paille
Fr outil 7 compte rendu photos chanvre dans tous ses états
Fr outil 7 compte rendu photos chanvre dans tous ses états
Recently uploaded
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Digital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
Recently uploaded (20)
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
educational program sprayed hemp
- 1. TEACHING PROGRAMME Sprayed insulating hemp-lime mix Association Etudes et Chantiers Bretagne Pays de Loire 03 rue Jean Lemaistre 35000 Rennes SPRAYEDINSULATINGHEMP-LIMEMIX SKILLS TARGETED Identify and apply safety rules Organize the work area Understand the materials (technical and practical data) Carry out an efficient ecological insulation with hemp and lime Use the dedicated tools and equipment for preparing the mix and applying it Provide links with existing materials Manufacture binders according to chosen application Carry out the insulation of a wall with sprayed lime and hemp PRE-CONDITIONS This training is designed for beginners. It is presented as a first approach of lime and hemp used as insulating materials. It uses the concepts of quantity and safety. An English translation is provided on site. FEATURES OF THE OCCUPATIONAL ACTIVITY The occupation is that of a mason and/or an insulation professional who includes structural concepts in his practice. The activity is varied and requires attention to details. The activity requires carrying heavy loads and a sustaining effort for the projection of plasters. This activity requires analytical, mathematical and conversion capabilities, as well as to communicate and a strong sensitivity for natural materials. It is carried out inside and / or outside on new or old buildings. The activity is frequently carried out at height. TEACHING METHOD The training will be carried out in the form of a demonstration action, supervised by a hemp expert company, ACEIS The intervention of a technician from Tradical is scheduled in the morning. Theoretical explanations will be provided on site. Practical explanations and demonstrations will be made on site. The trainees will be practicing on the training material - brick walls of an existing contemporary building. ORGANIZATION 1 day training Date : 19 November 2014 Scheduke : 9.00 a.m.-12.00 a.m. / 14.00 p.m.-16.00 p.m. Location : A.C.E.I.S, La Mézière (Ille-et-Vilaine) Number of participants : 5-10 Training supervisor: Christophe Lubert, A.C.E.I.S
- 2. SPRAYEDINSULATINGHEMP-LIMEMIX Activity Teaching method Duration Hemp : history, culture and uses. Lime : preferred binder, what you need to know about lime, hydrated lime, hydraulic lime, manufacturing, specific uses. Presenting dry lime and hemp plaster samples. Theoretical presentation 3h Implementing lime and hemp insulation: from mortar to laying with a spray machine. Practical demonstration 2h Presenting Eco Sain Habitat products – eco-building materials distributing company. Presentation by the manager of the company 1h COST AND TRAINING SUPPORT Educational cost supported within the Libnam European interreg project. INFORMATION AND REGISTRATION Please register with : Elisabeth Ribeiro 02 30 21 00 16 - 06 61 40 47 22 ec.bretagne.ribeiro@orange.fr