Emega- OPERATOR FOR OVERHEAD GARAGE DOORS UP TO 14 M² (150 FT²)

1. OPERATOR
FOR OVERHEAD
GARAGE DOORS
UP TO 14 M² (150 FT²)
Emega

2. Medium to Large
Garage Doors
Emega is designed for intense heavy duty work on medium-to-
large overhead garage doors up to 14 m² (150 ft²). It is ideal also
for low-ceiling garages or ones with reduced transoms.
Dimensions (mm)
If you need to power a very large garage door, or one fitted with a pedestrian
door, you will need to fit two motors
512
165
128
Photocell
Photocell
SURFACE
MOUNTED SELECTOR
LOW CONSUMPTION
LED FLASHING LIGHT

3. Benefits
become
solutions.
Read up at came.com
on the entire range of Came products!
Came is a leading home automation,
industrial and special plant technology
projects manufacturing company.
A full range of household
solutions: from operators for
gates and garage doors, to shutter and
awning winding motors, and even home
automation control, to burglar proof and
video entry systems.Technology and
reliability to serve your business, thanks
to solutions designed for powering large
industrial doors, automatic doors, street
barriers, turnstiles, access controls and
parking facilities.
Guaranteed by 24 Volts
Systems running at 24 Volts are super
safe to use and very reliable under intense
working conditions, such as those found
at residential apartment complexes and
industrial facilities. Moreover, 24 Volt
systems work even during power outages,
thanks to the optional batteries.
EN TESTED safety
An electromechanical EN TESTED
branded system always ensures safe
controlled operation of moving doors,
in compliance with current legislative
standards in terms of impact forces.
IT ADAPTS TO ANY NEED
The ways of mounting Emega may change depending on the type of door
or installation needs: with one motor installed centrally or laterally, or with
two motors, installed laterally. A pedestrian door fitted directly into the
overhead one is not a problem, as also in this case the operator integrates
perfectly and in total safety.
TOTAL CONTROL
• The 24 V DC electronics is for adjusting the speed of maneuvering and
for the door's silent final approach.
• Practical user-friendly built-in release lever for manually opening the
garage door during power outages - even from outside using the door
handle itself.
• Self-diagnosing safety devices, such as photocells, before every
movement (model E1024).
• Immediate door movement stop via remote control.
Applications
Partially retracting protruding overhead
door
Fully retracting protruding
overhead door
Fully retracting
protruding overhead door
Fully retracting
non-protruding overhead door

4. MODEL E456 E1024 E306
IP protection rating 50 50 50
Power supply (V - 50/60 Hz) 230 AC 230 AC 230 AC
Motor power supply (V) 230 AC 50/60 Hz 24 DC 230 AC 50/60 Hz
Draw (A) 2 15 Max. 2
Power (W) 200 180 190
Maneuvering time at 90° (s) 25 ADJUSTABLE 25
Duty cycle (%) 50 INTENSIVE USE 50
Torque (Nm) 420 450 300
Operating temperature (°C / °F) -20 ÷ +55 / -4 ÷ +131 -20 ÷ +55 / -4 ÷ +131 -20 ÷ +55 / -4 ÷ +131
Motor's heat protection (°C / °F) 150 ÷ 302 - 150 ÷ 302
230 V AC 24 V DC
MODEL E306
E456
E1024 E1024
CONTROL PANEL ZE5 ZL170N ZL19NA
SAFETY FEATURES
SELF-DIAGNOSING safety devices
PREFLASHING while opening or closing
REOPEN while closing
TOTAL STOP
PARTIAL STOP
OBSTRUCTION DETECTED in front of photocells
Device for CONTROLLING MOVEMENT and DETECTING ANY OBSTRUCTIONS
AMPEROMETRIC DETECTION
CONTROL FEATURES
OPEN ONLY from transmitter and/or button
OPEN ONLY or CLOSE ONLY button connection
OPEN-STOP-CLOSE-STOP from transmitter and/or from button
OPEN-CLOSE-INVERSION from transmitter and/or from button
MAINTAINED ACTION
CHARACTERISTICS AND ADJUSTMENTS
FLASHING LIGHT connection
CYCLE LAMP connection
COURTESY LAMP connection
Antenna
GATE OPEN FLASHING LIGHT connection
Contact output for 2nd RADIO CHANNEL
OPERATING TIME adjustment
SELF-LEARNING of the transmitter's RADIO CODE
ELECTROLOCK/ELECTROBLOCK and/or ANTI RAMMING connection
Adjustable AUTOMATIC RECLOSING TIME
OPENING and/or CLOSING slow down
EMERGENCY BATTERY operation (optional)
Adjustable GATE TRAVEL and SLOW DOWN speeds
SELF-LEARNING opening and closng limit-switches
230 V AC 24 V DC
CUSTOMIZED ELECTRONICS FOR YOUR NEEDS!
Emega is available in both the 230 V AC and 24 V DC versions. The table shows the main
characteristics of the control panels, matched to the gearmotors.
LIMITS TO USE (DOORSURFACE)
9 m²
96.8 ft²
E306 E456 E1024
14 m²
150 ft²
E456 E1024
230 V AC 24 V DC
Note: 001E782A always install when fitting a 001E1024 double gearmotor
Came S.p.A.
is Quality and Environmentally
certified by
UNI EN ISO 9001
UNI EN ISO 14001
100%MAD
E
IN ITALY C
ERTIFICATE
ITPI.386
GARANZIA QUALITÀ ORIGINALE
Came products
are entirely designed
and made in ITALY
Came is a company of
SOME VERSIONS MAY NOT BE AVAILABLE IN YOUR COUNTRY.
FOR MORE INFORMATION PLEASE SPEAK TO YOUR LOCAL LICENSED DEALER.
© CAME SPA - KDEP#CEN10A3S114 - JAN_2014 - EN
Even partial reproduction is prohibited • CAME reserves the right to make changes to this document at any time
Came S.p.A.
Via Martiri della Libertà, 15
Dosson di Casier
Treviso - Italy
www.came.com