2. Electric Wire Rope Hoists with capacity 0.5 t–32 t
Double Rail Crane Trolleys
End -carriages
Hand pallet trucks
Spare parts for hoists
3. MW Yantra offers electric hoists in the following versions:
Normal
headroom
Stationary
or with double rail
trolley
Low headroom trolley
4. Stationary Type (foot-mounted)
Standard Capacities:
1t-32t
Application:
For double girder cranes (with
double rail trolley). Double
girder cranes are applied when
greater capacity is required and
also for all heavy duty
applications.
6. Normal Headroom
Standard Capacities:
1t-16t
Application:
For single girder cranes where
space is not an issue. The hoist
operates directly under and
parallel with the crane or
runway beam.
Technical features:
Depending of the lifting height
the trolleys are one or two and
consist of one electric trolley
motor with a planetary gearbox.
7. The hoisting gear consists of modules:
1. planetary reducer
2. rope guide
3. coupling
4. rope drum
5. hoist body
6. electric brake motor
7. hook block
8. Double Rail Trolley type KK10
- Capacity 10 tons
- Reeving 2x1 or 4x1
- Lifting height from 6.3 to 25 m
9. Double Rail Trolley type KK20
-Capacity 20 tons
-Reeving 4x1
-Lifting height 6.3m to 18m
10. Double Rail Trolley type KK32
- Capacity 32 tons
- Reeving 4x1
- Lifting height 6.3m to 18m
11. Double Rail Trolley KK20/5 and KK32/5
- Capacity 32/5 t and 20/5 t
- Reeving 4x1 and 2x1
- Lifting height 9 m
14. Standard operating conditions for Yantra hoists:
Temperature range: min. -25°C, max. +40°C;
Humidity: < 85%;
Indoor or outdoor use, under a shed at normal fire hazard;
Altitude above sea level up to 1000 m;
For normal, tropical and marine environments;
Three-phase AC power supply 400V/50Hz ± 10% for 2 speed motors;
Degrees of protection: electric panel IP54, electric motor IP54, control
panel IP56;
Thermo-protection of lifting motors and emergency “STOP” buttons on
the control panel and load limiter;
Upon customer request:
Timer for counting working hours;
Power supply different than 400V/50Hz (415 V, 480 V, 500 V, 60 Hz);
With latchkey;
15. Recommended periodic maintenance and inspections
Equipment
components
1-st maintenance Periodical inspections Maintenance
3 months 12 months Daily Weekly Monthly every
Inspection of rope
and fasteners
X X 6 months
Limit switch function X X 6 months
Load limiter X X 1 year
Hook condition X X 1 year
Reducer function X X 1 year
Brake function X X 6 months
Brake adjustment X 6 months
Inspection of
wheels/gaskets/beari
ngs
X 1 year
Stopper condition X 1 year
Inspection of el.
equipment
X X 1 year
Push button X X 3 months
Fastening bolts X 6 months