Cast aluminium alloy cable cleats are designed for securing cables in industrial and outdoor environments. The cleats are manufactured from LM6 aluminium alloy and can be epoxy coated for use in harsh conditions like sea air. The document provides a selection table with 10 different cleat models ranging from supporting cables up to 51mm to over 108mm in diameter. It also details testing information showing the cleats pass the requirements for impact resistance, resistance to electromechanical force, temperature range of -40 to 150 degrees C, and lateral and axial load tests according to European standard BS EN 50368:2003.

1. Aluminium Two Hole Cable Clamp Datasheet
Cast aluminium alloy cable cleats are designed for higher specification projects which call for an all metal
product. The cleat is manufactured from an LM6 aluminium alloy casting. For dry industrial use or outdoor
unpolluted areas. The product can be epoxy coated for use in harsh environments, such as sea air
conditions.
Selection table for Two Hole Cable Clamp Aluminium
Cable Range Dimensions
Fixing
P
mm
Max Dia.
mm
H
mm
D
mm
W
mm
Part No
2G-09N 51 57 96 68 49 76 2 x M10 25 208
2G-10N 57 64 96 75 49 76 2 x M10 25 220
2G-11N 64 70 134 84 64 114 2 x M10 10 376
2G-1200N 70 76 134 90 64 114 2 x M10 10 392
2G-1201N 76 83 142 96 64 114 2 x M10 10 451
2G-1202N 83 89 142 102 64 114 2 x M10 5 550
2G-131N 89 95 154 114 76 126 2 x M10 5 650
2G-132N 95 101 154 120 76 126 2 x M10 5 750
2G-141N 101 108 169 134 76 140 2 x M10 5 1100
2G-142N 108 114 169 140 76 140 2 x M10 5 1450
Issue 02 24/08/2011 Page 1 of 2
Hole
mm
Pack Qty
Item
Weight
g
Min Dia.
mm
WWW.CABLEJOINTS.CO.UK
THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK

2. Testing Information
The Two Hole Aluminium Cleats have been tested in line with the European Standard of 'Cable Cleats
for Electrical Installations' BS EN 50368:2003. The results are detailed below:
Single Cable
Application
Test Data
Cleat Type 6.1, 6.1.3 Metallic -
Impact Resistance 6.2, 6.2.5, 9.3
Resistance to
Electromechanical
Force.
Very Heavy
Classification (>6.7kg @
300mm)
6.3 Refer to Ellis Patents for
further details.
Temperature for
Permanent Application
Axial Movement Test 9.5 Newtons (N)
Issue 02 24/08/2011 Page 2 of 2
6.4 oC
Properties
BS EN 50368:2003
Classification
Clause
Units /
Classification
Pass
Refer to Ellis
Patents for further
details.
-40 to 150
2000
Needle Flame Test 6.5, 10.0 Application Time
(seconds) >120
Lateral Load Test 9.2 Newtons (N) 28000
WWW.CABLEJOINTS.CO.UK
THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK