Hellermann Tyton Straight Heat Shrink Boots - Spec Sheet
•
0 likes•738 views
This document provides specifications for a series of low profile straight cable joint boots. It includes a table listing 7 different boot types designated 313F322 through 313F396, each with minimum and maximum diameter and length specifications. The boots are made of heat shrink material and provide strain relief for partially loaded connectors and small cable diameters.
Report
Share
Report
Share
Download to read offline
Recommended
Hellermann Tyton Right Angle Heat Shrink Boots - Spec Sheet
This document provides specifications for Helashrink 333F Series low profile right angle boots for cable insulation. It includes a table listing seven boot types, their dimensional specifications in both expanded and recovered forms, compatible adhesive materials, and other information. Adhesive materials that can be used include TSA-200, WM250, W8, W24, V9500 and HMT200A. The boots provide strain relief for partially loaded connectors and cables with small diameters, shrinking to a high ratio for a tight fit.
Hellermann Tyton Shim Heat Shrink Boots - Spec Sheet
This document provides information on low profile boots and transitions for insulating cables. It lists several adhesive material options that are compatible with different cable sizes. It also provides specifications for four models of low profile shim boots, including their minimum and maximum diameter dimensions both in expanded and recovered form. Additional information on material selection and specifications can be found by referring to page 10.
Hellermann Tyton Transition Heat Shrink Boots, 1 to 3 Cables (3 Way) - Spec S...
Hellermann Tyton Transition Heat Shrink Boots, 1 to 3 Cables (3 Way) - Spec S...Thorne & Derrick International
The document provides information on low profile transition boots for cable insulation. It lists 4 article numbers for Helashrink 573H series boots that can accommodate 1 to 3 cables. It identifies compatible adhesive materials and notes boots are also available without adhesive. A table specifies the sizes and dimensions for each boot type, including minimum and maximum inner and outer diameters as well as other nominal dimensions. Contact information is given at the bottom for the manufacturer.Hellermann Tyton Convolute Heat Shrink Boots - Spec Sheet
This document provides specifications for low profile convolute cable boots made by Helashrink. It includes a table with technical specifications for six different boot models numbered 313C722 through 313C774. The table specifies dimensions for each model including minimum and maximum outer diameters, length, width, and other mechanical properties. Installation instructions indicate the boots are supplied in an expanded form and recover fully after heating to provide strain relief and environmental sealing when used with an adapter for circular grooved cables.
Hellermann Tyton Transition Heat Shrink Boots, 1 to 2 Cables (2 Way) - Spec S...
Hellermann Tyton Transition Heat Shrink Boots, 1 to 2 Cables (2 Way) - Spec S...Thorne & Derrick International
This document provides information about low profile transition boots for insulating and protecting cable harness breakouts. It lists various boot models and their specifications, including sizing details. Adhesive options are indicated. The boots are supplied in an expanded form for installation and then recover fully after heating.Hellermann Tyton Transition Heat Shrink Boots, Side Breakout - Spec Sheet
Hellermann Tyton Transition Heat Shrink Boots, Side Breakout - Spec SheetThorne & Derrick International
This document provides information about low profile boots and transitions for insulation. It lists several adhesive materials that are compatible with different boot models. A table specifies the sizes and dimensions for various boot types, including the minimum and maximum diameters for the expanded and recovered forms. Contact information is also provided at the bottom for inquiries.Boddingtons Electrical Consac Cable Jointing Tools - Consac Sheath Cutting Tool
Boddingtons Electrical Consac Cable Jointing Tools - Consac Sheath Cutting ToolThorne & Derrick International
This document provides information on various tools for electrical cable jointing and termination including:
1) A damp testing saucepan used to test cable insulation with a locking lid, inner basket, and thermometer.
2) A torque limiting screwdriver preset from 1 to 13.6 Nm used for cable connectors and clips along with optional sockets.
3) A Consac sheath cutting tool that safely cuts cable sheaths in exact depths using interchangeable cutting wheels along with optional punches, lifters, and carrying case.
4) An inspection mirror for confined areas made of plastic with a rubber casing.Consac Sheath Cutting Tools
The Consac Sheath Cutting Tool safely and accurately cuts the aluminium sheath on Consac cable without damaging the inner conductor. It comes in different sizes with interchangeable cutting wheels to cut sheaths of various diameters. A range of accessories like sheath punches, lifters, and carrying cases are also available to facilitate cable jointing and terminating.
Recommended
Hellermann Tyton Right Angle Heat Shrink Boots - Spec Sheet
This document provides specifications for Helashrink 333F Series low profile right angle boots for cable insulation. It includes a table listing seven boot types, their dimensional specifications in both expanded and recovered forms, compatible adhesive materials, and other information. Adhesive materials that can be used include TSA-200, WM250, W8, W24, V9500 and HMT200A. The boots provide strain relief for partially loaded connectors and cables with small diameters, shrinking to a high ratio for a tight fit.
Hellermann Tyton Shim Heat Shrink Boots - Spec Sheet
This document provides information on low profile boots and transitions for insulating cables. It lists several adhesive material options that are compatible with different cable sizes. It also provides specifications for four models of low profile shim boots, including their minimum and maximum diameter dimensions both in expanded and recovered form. Additional information on material selection and specifications can be found by referring to page 10.
Hellermann Tyton Transition Heat Shrink Boots, 1 to 3 Cables (3 Way) - Spec S...
Hellermann Tyton Transition Heat Shrink Boots, 1 to 3 Cables (3 Way) - Spec S...Thorne & Derrick International
The document provides information on low profile transition boots for cable insulation. It lists 4 article numbers for Helashrink 573H series boots that can accommodate 1 to 3 cables. It identifies compatible adhesive materials and notes boots are also available without adhesive. A table specifies the sizes and dimensions for each boot type, including minimum and maximum inner and outer diameters as well as other nominal dimensions. Contact information is given at the bottom for the manufacturer.Hellermann Tyton Convolute Heat Shrink Boots - Spec Sheet
This document provides specifications for low profile convolute cable boots made by Helashrink. It includes a table with technical specifications for six different boot models numbered 313C722 through 313C774. The table specifies dimensions for each model including minimum and maximum outer diameters, length, width, and other mechanical properties. Installation instructions indicate the boots are supplied in an expanded form and recover fully after heating to provide strain relief and environmental sealing when used with an adapter for circular grooved cables.
Hellermann Tyton Transition Heat Shrink Boots, 1 to 2 Cables (2 Way) - Spec S...
Hellermann Tyton Transition Heat Shrink Boots, 1 to 2 Cables (2 Way) - Spec S...Thorne & Derrick International
This document provides information about low profile transition boots for insulating and protecting cable harness breakouts. It lists various boot models and their specifications, including sizing details. Adhesive options are indicated. The boots are supplied in an expanded form for installation and then recover fully after heating.Hellermann Tyton Transition Heat Shrink Boots, Side Breakout - Spec Sheet
Hellermann Tyton Transition Heat Shrink Boots, Side Breakout - Spec SheetThorne & Derrick International
This document provides information about low profile boots and transitions for insulation. It lists several adhesive materials that are compatible with different boot models. A table specifies the sizes and dimensions for various boot types, including the minimum and maximum diameters for the expanded and recovered forms. Contact information is also provided at the bottom for inquiries.Boddingtons Electrical Consac Cable Jointing Tools - Consac Sheath Cutting Tool
Boddingtons Electrical Consac Cable Jointing Tools - Consac Sheath Cutting ToolThorne & Derrick International
This document provides information on various tools for electrical cable jointing and termination including:
1) A damp testing saucepan used to test cable insulation with a locking lid, inner basket, and thermometer.
2) A torque limiting screwdriver preset from 1 to 13.6 Nm used for cable connectors and clips along with optional sockets.
3) A Consac sheath cutting tool that safely cuts cable sheaths in exact depths using interchangeable cutting wheels along with optional punches, lifters, and carrying case.
4) An inspection mirror for confined areas made of plastic with a rubber casing.Consac Sheath Cutting Tools
The Consac Sheath Cutting Tool safely and accurately cuts the aluminium sheath on Consac cable without damaging the inner conductor. It comes in different sizes with interchangeable cutting wheels to cut sheaths of various diameters. A range of accessories like sheath punches, lifters, and carrying cases are also available to facilitate cable jointing and terminating.
Prysmian BICON LSF Hook Cable Cleat 384LSF01 25-35mm Cable OD's
This document summarizes a heavy duty hook cleat for securing cables. The cleat is manufactured from glass-filled nylon or LSOH materials. It has a two-piece, single fixing design and can secure cables from 25-80mm in diameter. It is intended for indoor and outdoor use at operating temperatures between -20°C and +90°C.
3 Way Low Voltage Distribution Boards - AKi03
The document describes AK distribution board systems for IP65 and IP55 applications with voltages of 400/690V. It provides details on their construction including flame resistant materials, pre-assembled sealing membranes, screwless PE/N terminals, sizes ranging from 3-70 ways, and compatibility with other AK components. A wide range of accessories are available and the boards provide generous wiring space between rails.
Prysmian Aluminium Hook Cable Cleats - 371 Series Cable Cleats
The document summarizes an aluminum hook cleat for securing cables. It has the following key details:
- Suitable for cable diameters between 19-76mm
- Manufactured from aluminum alloy and designed for indoor/outdoor industrial use between -60°C to +105°C
- Two-piece, single fixing design that can be double stacked or installed in a temporary open position for single person work
- Meets European safety standards for impact resistance and load limits
Freud Precision Router Bits
Freud router bits are precision tools made from tungsten carbide and titanium for maximum cutting life. Freud has been an industry leader in router bits for over 50 years due to their high quality materials, precise manufacturing, and individually balanced bits. Their bits feature micrograin carbide, kickback-reducing shoulders, shear angles, and other properties for smooth, safe cuts. Freud offers a wide selection of straight, spiral, and trim bits suitable for various woodworking applications.
Concrete Pumping & Placement Hose Products Linecard
JGB Enterprises is proud to present Eaglecrete® Concrete Placement hoses and accessories. These material handling hoses and accessories are designed and manufactured to stand up to the most abrasive applications, and materials from sand, shot, dry cement, gravel, seed, lime, animal feed, and even mild chemicals, agricultural sprays, and hot air.
Contact our Sales Department for more Info at 315-451-2770
Lucy Fortress Feeder Pillars, Galvanised Steel - Size 22
This document summarizes the specifications for a double door hinged pillar. It has two or three hinged doors made of solid stainless steel with two wedge locks for security. The backboard is 18mm thick exterior grade plywood. It comes in 9 sizes from 1300mm to 1600mm high and seals up to an IP65 rating. Options include different materials, locks, and accessories. Dimensions and weights are provided for each standard size.
12777 coastal single pages part17
This document provides information on glazing seals and weatherstripping products, including specifications and part numbers. It lists glazing gaskets, EPDM estrips, and CoFirm double-sided foam tapes for glazing applications, noting sizes, materials, and finishes available. Product numbers, descriptions, roll lengths, and colors are given for the various glazing seals and weatherstripping items.
YDM Laboratory Technique Catalogue
This document lists various dental laboratory tools and equipment. It provides the names, product codes, specifications, and brief descriptions of over 150 items including articulators, carvers, forceps, calipers, torches and more. Key details like sizes, capacities, materials and intended uses are specified. Accessories are also outlined for the various articulator models.
Unite Brochure
This document contains engineering drawings and product specifications for UniteTM manhole covers manufactured by Wrekin Products Ltd. It includes:
1. Detailed engineering drawings and dimensions for UniteTM manhole covers in various standard sizes.
2. Specifications noting the covers are made of strong ductile iron, comply with relevant standards, and have features like a non-rock design and safety keyways.
3. Information on options for the covers like locking, ventilation holes, anti-slip coatings.
4. Details on the patented design features that provide durability like reduced flexing and improved frame-cover seating interface.
5. Descriptions of the sustainability benefits of UniteTM
12777 coastal single pages part140
This document provides information on kitchen and cupboard hardware from Coastal Group, including drawer runners and hinges. It describes the features of the Intermat full extension drawer slides, including slide-on assembly, silent closure, roll-out prevention, and stability. Tables list the code, description, finish, and load capacity for various Intermat models. Additional sections cover runner catches and the Quadro V6 silent system full-extension slides for wooden drawers.
Lucy Zodion Feeder Pillar Catalogue
This document provides information on various power pillar products from Lucy Zodion Ltd, including:
- The Castle range includes retractable Westminster and Telescopic power pillars that can be locked and folded flat when not in use, ideal for supplying temporary power.
- The Fortress range includes feeder pillars able to withstand various climates with minimal maintenance. Variants have detachable roots and roofs.
- Product ranges include retractable pillars from the Castle range, Fortress Mini pillars in various sizes, and Fortress Single Door pillars in mild or stainless steel.
- Specifications, options, and ordering information are provided for different pillar models.
Hotdeals September 2013
This document provides information about ordering from and shipping with Enco, including:
- 99% of inventory ships within one business day.
- Primary shipping is UPS Ground for orders under 125 lbs, with some heavier items shipping by truck.
- Returns must be authorized by calling Enco and received within 30 days in resalable condition.
- Various tools, equipment and supplies are advertised with discounted sale prices.
Is mountings
This document provides information on IS mountings from GMT RUBBER-METAL-TECHNIC LTD. It includes dimensions and part numbers for a range of mountings made from chloroprene rubber. The construction provides similar stiffness in all three axes. Load-deflection graphs are given to show compression characteristics for different mountings at various angles from 40 to 70 degrees.
Jinwei catalog
This document is a catalog from Linyi JINWEI MAGNETICS Co.,Ltd that describes various welding magnet products including arrow welding magnets, hexagon welding magnets, strong welding holders, and switchable welding holders. Details are provided for each product line including codes, dimensions, magnetic force, and packaging. Contact information is provided at the end for James Wang at the company.
ToughWash Informational Sheet
This document provides specifications for ToughWash labels that are resistant to harsh washdown conditions. It lists various label models for different printers including the BBP31, BBP33, GlobalMark 2, and BMP71 printers. The labels are made of materials that can withstand high heat, chemicals, pressure sprays, and multiple washdown cycles. Model B-854 labels are additionally metal detectable. The document directs the reader to the Brady website for more information on ToughWash labels suitable for food and beverage processing facilities.
Strenx 700
Vandan Steel & Engg. co. wearplates are composite plates having a very alloyed wear safe surfacing on a low carbon steel base.These plates are fabricated by customizing programmed hardfacingprocess bringing about a hard, intense and very wear safe surface.The mild steel base makes the plates manageable to simple forming, welding or shooting to the segment surfaces.
The prevalence of the Vandan Steel & Engg. co. Pvt.Ltd scope of wear plates is an aftereffect of strict investigative and metallurgical control of every last one of phases of the creation methodology moved down by the specialized ability of Vandan Steel & Engg. co. Pvt.Ltd in welding consumables.
visit us: https://wearplates.co.in
Physical inventory count sheet
This physical inventory count sheet documents inventory for a company. It lists 101 inventory items along with their item numbers, descriptions, purchase prices, quantities on hand, and locations. The sheet was performed on an unspecified date and signed by an individual.
M3 Lecture 10 timber roof structure answer
This document provides a bill of quantities for timber roof structure elements. It lists materials needed including rafters, ceiling joists, ridges, struts, fascia boards, roof tiles, insulation paper, paint, gutters, downpipes, and fittings. Key elements are 27 meters of wall plates, 254.8 meters of rafters, 174.2 meters of ceiling joists, 151.9 square meters of roof tiles, 32.4 meters of gutters, and 18 meters of downpipes. The document provides specifications and quantities of materials for a complete timber roof assembly.
Strainers fvf
The FVF strainer is designed for heating, district heating and cooling systems to remove foreign particles from liquids. It comes in sizes from 15-300mm and can withstand temperatures from -10 to 300°C. The strainer body is made of cast iron or ductile iron depending on pressure rating and includes a removable screen to catch particles. It can also include accessories like a magnetic insert, ball valve, or different screen mesh sizes.
Semi-automatic H Seal Combi Case Sealer
Combi continues to find solutions for its customers and end users. Here we have our Semi-Automatic Top and Bottom Case Sealer. This machine is build tough and comes with six 3M Accuglide tape heads. If your looking for a top of the line box sealer that can provide "H" type seal, you have found it. Request your quote today, don't hesitate.
BESSEY Clamping to equipment and maschine tables
The document discusses various clamping elements and accessories for welding tables made by Bessey. It provides details on:
1. Clamping elements with adjustable throat depth, fixed throat depth, and a heavy-duty clamping element with a heat-resistant tilting pressure plate.
2. Accessories for the clamping elements including table clamps, vario attachments for round/oval workpieces, toggle clamp adapters, extensions, and attachments to use existing clamps on welding tables.
3. Self-adjusting toggle clamps that adapt to workpieces of varying thickness without manual adjustment, providing powerful and gentle clamping.
Tindall_Utilities_Catalog_ Updated_7:7:2011_TAP
This document provides a catalog of specialized precast concrete components for underground drainage structures and sewer systems. It includes product descriptions, specifications, and weights for boxes, tops, bases, risers, vaults, and other precast concrete components. Product lines include KO Series multipurpose boxes, curb inlet components, G Series storm structure hole bases, UV Series vaults, and more. Installation of precast components allows for faster, safer construction compared to pour-in-place methods.
More Related Content
What's hot
Prysmian BICON LSF Hook Cable Cleat 384LSF01 25-35mm Cable OD's
This document summarizes a heavy duty hook cleat for securing cables. The cleat is manufactured from glass-filled nylon or LSOH materials. It has a two-piece, single fixing design and can secure cables from 25-80mm in diameter. It is intended for indoor and outdoor use at operating temperatures between -20°C and +90°C.
3 Way Low Voltage Distribution Boards - AKi03
The document describes AK distribution board systems for IP65 and IP55 applications with voltages of 400/690V. It provides details on their construction including flame resistant materials, pre-assembled sealing membranes, screwless PE/N terminals, sizes ranging from 3-70 ways, and compatibility with other AK components. A wide range of accessories are available and the boards provide generous wiring space between rails.
Prysmian Aluminium Hook Cable Cleats - 371 Series Cable Cleats
The document summarizes an aluminum hook cleat for securing cables. It has the following key details:
- Suitable for cable diameters between 19-76mm
- Manufactured from aluminum alloy and designed for indoor/outdoor industrial use between -60°C to +105°C
- Two-piece, single fixing design that can be double stacked or installed in a temporary open position for single person work
- Meets European safety standards for impact resistance and load limits
Freud Precision Router Bits
Freud router bits are precision tools made from tungsten carbide and titanium for maximum cutting life. Freud has been an industry leader in router bits for over 50 years due to their high quality materials, precise manufacturing, and individually balanced bits. Their bits feature micrograin carbide, kickback-reducing shoulders, shear angles, and other properties for smooth, safe cuts. Freud offers a wide selection of straight, spiral, and trim bits suitable for various woodworking applications.
Concrete Pumping & Placement Hose Products Linecard
JGB Enterprises is proud to present Eaglecrete® Concrete Placement hoses and accessories. These material handling hoses and accessories are designed and manufactured to stand up to the most abrasive applications, and materials from sand, shot, dry cement, gravel, seed, lime, animal feed, and even mild chemicals, agricultural sprays, and hot air.
Contact our Sales Department for more Info at 315-451-2770
Lucy Fortress Feeder Pillars, Galvanised Steel - Size 22
This document summarizes the specifications for a double door hinged pillar. It has two or three hinged doors made of solid stainless steel with two wedge locks for security. The backboard is 18mm thick exterior grade plywood. It comes in 9 sizes from 1300mm to 1600mm high and seals up to an IP65 rating. Options include different materials, locks, and accessories. Dimensions and weights are provided for each standard size.
12777 coastal single pages part17
This document provides information on glazing seals and weatherstripping products, including specifications and part numbers. It lists glazing gaskets, EPDM estrips, and CoFirm double-sided foam tapes for glazing applications, noting sizes, materials, and finishes available. Product numbers, descriptions, roll lengths, and colors are given for the various glazing seals and weatherstripping items.
YDM Laboratory Technique Catalogue
This document lists various dental laboratory tools and equipment. It provides the names, product codes, specifications, and brief descriptions of over 150 items including articulators, carvers, forceps, calipers, torches and more. Key details like sizes, capacities, materials and intended uses are specified. Accessories are also outlined for the various articulator models.
Unite Brochure
This document contains engineering drawings and product specifications for UniteTM manhole covers manufactured by Wrekin Products Ltd. It includes:
1. Detailed engineering drawings and dimensions for UniteTM manhole covers in various standard sizes.
2. Specifications noting the covers are made of strong ductile iron, comply with relevant standards, and have features like a non-rock design and safety keyways.
3. Information on options for the covers like locking, ventilation holes, anti-slip coatings.
4. Details on the patented design features that provide durability like reduced flexing and improved frame-cover seating interface.
5. Descriptions of the sustainability benefits of UniteTM
12777 coastal single pages part140
This document provides information on kitchen and cupboard hardware from Coastal Group, including drawer runners and hinges. It describes the features of the Intermat full extension drawer slides, including slide-on assembly, silent closure, roll-out prevention, and stability. Tables list the code, description, finish, and load capacity for various Intermat models. Additional sections cover runner catches and the Quadro V6 silent system full-extension slides for wooden drawers.
Lucy Zodion Feeder Pillar Catalogue
This document provides information on various power pillar products from Lucy Zodion Ltd, including:
- The Castle range includes retractable Westminster and Telescopic power pillars that can be locked and folded flat when not in use, ideal for supplying temporary power.
- The Fortress range includes feeder pillars able to withstand various climates with minimal maintenance. Variants have detachable roots and roofs.
- Product ranges include retractable pillars from the Castle range, Fortress Mini pillars in various sizes, and Fortress Single Door pillars in mild or stainless steel.
- Specifications, options, and ordering information are provided for different pillar models.
Hotdeals September 2013
This document provides information about ordering from and shipping with Enco, including:
- 99% of inventory ships within one business day.
- Primary shipping is UPS Ground for orders under 125 lbs, with some heavier items shipping by truck.
- Returns must be authorized by calling Enco and received within 30 days in resalable condition.
- Various tools, equipment and supplies are advertised with discounted sale prices.
Is mountings
This document provides information on IS mountings from GMT RUBBER-METAL-TECHNIC LTD. It includes dimensions and part numbers for a range of mountings made from chloroprene rubber. The construction provides similar stiffness in all three axes. Load-deflection graphs are given to show compression characteristics for different mountings at various angles from 40 to 70 degrees.
Jinwei catalog
This document is a catalog from Linyi JINWEI MAGNETICS Co.,Ltd that describes various welding magnet products including arrow welding magnets, hexagon welding magnets, strong welding holders, and switchable welding holders. Details are provided for each product line including codes, dimensions, magnetic force, and packaging. Contact information is provided at the end for James Wang at the company.
ToughWash Informational Sheet
This document provides specifications for ToughWash labels that are resistant to harsh washdown conditions. It lists various label models for different printers including the BBP31, BBP33, GlobalMark 2, and BMP71 printers. The labels are made of materials that can withstand high heat, chemicals, pressure sprays, and multiple washdown cycles. Model B-854 labels are additionally metal detectable. The document directs the reader to the Brady website for more information on ToughWash labels suitable for food and beverage processing facilities.
Strenx 700
Vandan Steel & Engg. co. wearplates are composite plates having a very alloyed wear safe surfacing on a low carbon steel base.These plates are fabricated by customizing programmed hardfacingprocess bringing about a hard, intense and very wear safe surface.The mild steel base makes the plates manageable to simple forming, welding or shooting to the segment surfaces.
The prevalence of the Vandan Steel & Engg. co. Pvt.Ltd scope of wear plates is an aftereffect of strict investigative and metallurgical control of every last one of phases of the creation methodology moved down by the specialized ability of Vandan Steel & Engg. co. Pvt.Ltd in welding consumables.
visit us: https://wearplates.co.in
Physical inventory count sheet
This physical inventory count sheet documents inventory for a company. It lists 101 inventory items along with their item numbers, descriptions, purchase prices, quantities on hand, and locations. The sheet was performed on an unspecified date and signed by an individual.
M3 Lecture 10 timber roof structure answer
This document provides a bill of quantities for timber roof structure elements. It lists materials needed including rafters, ceiling joists, ridges, struts, fascia boards, roof tiles, insulation paper, paint, gutters, downpipes, and fittings. Key elements are 27 meters of wall plates, 254.8 meters of rafters, 174.2 meters of ceiling joists, 151.9 square meters of roof tiles, 32.4 meters of gutters, and 18 meters of downpipes. The document provides specifications and quantities of materials for a complete timber roof assembly.
Strainers fvf
The FVF strainer is designed for heating, district heating and cooling systems to remove foreign particles from liquids. It comes in sizes from 15-300mm and can withstand temperatures from -10 to 300°C. The strainer body is made of cast iron or ductile iron depending on pressure rating and includes a removable screen to catch particles. It can also include accessories like a magnetic insert, ball valve, or different screen mesh sizes.
Semi-automatic H Seal Combi Case Sealer
Combi continues to find solutions for its customers and end users. Here we have our Semi-Automatic Top and Bottom Case Sealer. This machine is build tough and comes with six 3M Accuglide tape heads. If your looking for a top of the line box sealer that can provide "H" type seal, you have found it. Request your quote today, don't hesitate.
What's hot (20)
Prysmian BICON LSF Hook Cable Cleat 384LSF01 25-35mm Cable OD's
Prysmian BICON LSF Hook Cable Cleat 384LSF01 25-35mm Cable OD's
Prysmian Aluminium Hook Cable Cleats - 371 Series Cable Cleats
Prysmian Aluminium Hook Cable Cleats - 371 Series Cable Cleats
Concrete Pumping & Placement Hose Products Linecard
Concrete Pumping & Placement Hose Products Linecard
Lucy Fortress Feeder Pillars, Galvanised Steel - Size 22
Lucy Fortress Feeder Pillars, Galvanised Steel - Size 22
Similar to Hellermann Tyton Straight Heat Shrink Boots - Spec Sheet
BESSEY Clamping to equipment and maschine tables
The document discusses various clamping elements and accessories for welding tables made by Bessey. It provides details on:
1. Clamping elements with adjustable throat depth, fixed throat depth, and a heavy-duty clamping element with a heat-resistant tilting pressure plate.
2. Accessories for the clamping elements including table clamps, vario attachments for round/oval workpieces, toggle clamp adapters, extensions, and attachments to use existing clamps on welding tables.
3. Self-adjusting toggle clamps that adapt to workpieces of varying thickness without manual adjustment, providing powerful and gentle clamping.
Tindall_Utilities_Catalog_ Updated_7:7:2011_TAP
This document provides a catalog of specialized precast concrete components for underground drainage structures and sewer systems. It includes product descriptions, specifications, and weights for boxes, tops, bases, risers, vaults, and other precast concrete components. Product lines include KO Series multipurpose boxes, curb inlet components, G Series storm structure hole bases, UV Series vaults, and more. Installation of precast components allows for faster, safer construction compared to pour-in-place methods.
Marechal Plugs & Sockets - Marechal DS Decontacors For Industry 30A / 50A / 9...
Marechal Plugs & Sockets - Marechal DS Decontacors For Industry 30A / 50A / 9...Thorne & Derrick International
The document provides information on DS decontactors from Schneider Electric, which are socket outlets with integrated switching capabilities. The DS family offers ratings from 30A to 250A and complies with various international safety standards. It describes the specifications, features, configurations, accessories, and applications of the DS1, DS3, and DS6 decontactors, which have rated currents of 30A, 50A, and 90A respectively.Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes Thorne & Derrick International
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Helashrink heatshrink boots and moulded shapes in conjunction with specialist heatshrink tubing make it easy to fabricate complete jacketed wire and cable harnessing and interconnection systems.
Hellermann Tyton Helashrink heatshrink boots (straight and right-angled) and moulded shapes are available for the complete range of electrical and electronic harnessing applications. Heat shrink boots and shapes can be sealed with special adhesives and encapsulants to ensure the proper degree of mechanical support, strain relief and environmental protection. Encapsulating the complete harnessing and interconnection system to the desired configuration is easily and neatly accomplished with minimum weight and bulk using Hellermann Tyton Helashrink heat shrink components.
Hellermann Tyton Heat Shrink Moulded Shapes & Boots - Overview....
Hellermann Tyton Helashrink heat shrinkable shapes, end caps and cable break-out boots with and without inner adhesive. Hellermannn Tyton heat shrink backshells, 2-way outlet shapes, 3-way outlet shapes, 4-way outlet shapes, 5-way outlet shapes up to 6-way outlet shapes. Hellermann Tyton heat shrink right angle boot 90°, 45°C angle, T-shapes, Y-outlet, VG-style shapes. Heat shrink cable end caps for low voltage applications, two components epoxy adhesive and hot melt tape.
dsi-dywidag-form-tie-systems-en.pdf
The document provides information on DYWIDAG Form Tie Systems products including threadbars, anchorages installed in concrete, nuts and couplers, and other accessories. It describes the different types of threadbars that can be used, including those that are not weldable, insensitive to weld spatter, and weldable varieties. It also details various anchorages that can be embedded in concrete like wobble anchors, hook anchors, loop anchors, and plate anchors. The document provides specifications for nuts, couplers, combination plates, and pressed waler plates that are used with the threadbars.
Nexans Euromold 900 Series Interface F Asymmetrical Cable Connectors HV
Nexans Euromold 900 Series Interface F Asymmetrical Cable Connectors HVThorne & Derrick International
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
Schiedel Metaloterm MFflue system
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
JYM | Mangueras Industriales Fábrica
JYM Ofrecemos mangueras Industriales para todo tipo de usos,desde Mangueras Jebe y Lona,Manguera de aire,manguera de chorro de arena,MANGUERA MINERA AMARILLA,MANGUERA JEBE Y LONA DESCARGA DE PETROLEO
http://www.jymfg.com
Abtech ZAG10-9 Aluminium Electrical Enclosure & Junction Box
The document discusses die cast aluminum enclosures called ZAG enclosures. It provides details on 19 sizes of ZAG enclosures, which are precision die cast from aluminum alloy for corrosion resistance. The enclosures have IP65/66/67 ingress protection and are suitable for hazardous areas. They can be customized with various accessories and options.
Abtech ZAG14 Aluminium Electrical Enclosure & Junction Box
The document discusses die cast aluminum enclosures called ZAG enclosures. It provides details on 19 sizes of ZAG enclosures, which are precision die cast from aluminum alloy for corrosion resistance. The enclosures have IP65/66/67 ingress protection and are suitable for use in hazardous areas. The document lists specifications, dimensions, and accessories for each enclosure size.
Abtech ZAG16 Aluminium Electrical Enclosure & Junction Box
The document discusses die cast aluminum enclosures called ZAG enclosures. It provides details on 19 sizes of ZAG enclosures, which are precision die cast from aluminum alloy for corrosion resistance. The enclosures have IP65/66/67 ingress protection and are suitable for hazardous areas. They can be customized with various accessories and options.
Abtech ZAG11 Aluminium Electrical Enclosure & Junction Box
The document discusses die cast aluminum enclosures called ZAG enclosures. It describes 19 standard sizes of ZAG enclosures that are precision die cast from aluminum alloy for corrosion resistance. The enclosures have IP65/66/67 ingress protection and can be used in hazardous areas with various certifications. The document provides details on enclosure features, accessories, technical drawings and specifications for different ZAG enclosure sizes.
Abtech ZAG4 Aluminium Electrical Enclosure & Junction Box
The document discusses die cast aluminum enclosures called ZAG enclosures. It provides details on 19 sizes of ZAG enclosures, which are precision die cast from aluminum alloy for corrosion resistance. The enclosures have IP65/66/67 ingress protection and are suitable for use in hazardous areas. The document lists specifications, dimensions, and accessories for each enclosure size.
Abtech ZAG9 Aluminium Electrical Enclosure & Junction Box
The document discusses die cast aluminum enclosures called ZAG enclosures. It provides details on 19 sizes of ZAG enclosures, which are precision die cast from aluminum alloy for corrosion resistance. The enclosures have IP65/66/67 ingress protection and are suitable for hazardous areas. They can be customized with various accessories and options.
Abtech ZAG8 Aluminium Electrical Enclosure & Junction Box
The document discusses die cast aluminum enclosures called ZAG enclosures. It provides details on 19 sizes of ZAG enclosures, including their dimensions, material specifications, temperature ratings, certifications, and optional accessories. The enclosures are precision die cast from aluminum alloy for corrosion resistance. They have IP65-67 ingress protection and can be used in hazardous areas with appropriate certification.
Abtech ZAG5 Aluminium Electrical Enclosure & Junction Box
The document discusses die cast aluminum enclosures called ZAG enclosures. It provides details on 19 sizes of ZAG enclosures, which are precision die cast from aluminum alloy for corrosion resistance. The enclosures have IP65/66/67 ingress protection and are suitable for use in hazardous areas. The document lists specifications, dimensions, and accessories for each enclosure size.
Abtech ZAG15 Aluminium Electrical Enclosure & Junction Box
The document discusses die cast aluminum enclosures called ZAG enclosures. It provides details on 19 sizes of ZAG enclosures, which are precision die cast from aluminum alloy for corrosion resistance. The enclosures have IP65/66/67 ingress protection and are suitable for hazardous areas. They can be customized with various accessories and options.
Abtech ZAG10 Aluminium Electrical Enclosure & Junction Box
The document discusses die cast aluminum enclosures called ZAG enclosures. It describes 19 standard sizes of ZAG enclosures that are precision die cast from aluminum alloy for corrosion resistance. The enclosures have IP65/66/67 ingress protection and can be used in hazardous areas with various certifications. The document provides details on enclosure features, accessories, technical drawings and specifications for different ZAG enclosure sizes.
Abtech ZAG7 Aluminium Electrical Enclosure & Junction Box
The document discusses die cast aluminum enclosures called ZAG enclosures. It provides details on 19 sizes of ZAG enclosures, which are precision die cast from aluminum alloy for corrosion resistance. The enclosures have IP65/66/67 ingress protection and are suitable for use in hazardous areas. The document lists specifications, dimensions, and accessories for each enclosure size.
Abtech ZAG9-9 Aluminium Electrical Enclosure & Junction Box
The document discusses die cast aluminum enclosures called ZAG enclosures. It describes 19 standard sizes of ZAG enclosures that are precision die cast from aluminum alloy for corrosion resistance. The enclosures have IP65/66/67 ingress protection and can be used in hazardous areas with various certifications. The document provides details on enclosure features, accessories, technical drawings and specifications for different ZAG enclosure sizes.
Similar to Hellermann Tyton Straight Heat Shrink Boots - Spec Sheet (20)
Marechal Plugs & Sockets - Marechal DS Decontacors For Industry 30A / 50A / 9...
Marechal Plugs & Sockets - Marechal DS Decontacors For Industry 30A / 50A / 9...
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Nexans Euromold 900 Series Interface F Asymmetrical Cable Connectors HV
Nexans Euromold 900 Series Interface F Asymmetrical Cable Connectors HV
Abtech ZAG10-9 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG10-9 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG14 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG14 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG16 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG16 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG11 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG11 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG4 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG4 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG9 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG9 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG8 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG8 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG5 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG5 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG15 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG15 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG10 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG10 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG7 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG7 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG9-9 Aluminium Electrical Enclosure & Junction Box
Abtech ZAG9-9 Aluminium Electrical Enclosure & Junction Box
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Recently uploaded (20)
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Hellermann Tyton Straight Heat Shrink Boots - Spec Sheet
- 1. 24 I n s u l a t i o n 2.1 Low Profile Boots and Transitions b: Fully recovered form (after heating) • Helashrink 313F Series, with adapter lip Adhesive Material 9 8 6 TSA-200 √ √ √ WM250 √ √ √ W8 √ √ √ W24 √ √ √ V9500 √ √ √ HMT200A √ √ √ Without Adhesive √ √ √ Article-No. Type 422-20000 313F322-9 422-20100 313F332-9 422-20200 313F343-9 422-20300 313F353-9 422-20400 313F364-9 422-20500 313F374-9 422-20600 313F385-9 422-20700 313F396-9 Low Profile Straight Boots This boot provides strain relief in applications with partially loaded connectors, resulting in small cable diameters requiring a high shrink ratio. 313F322-396 Series supplied / fully recovered. a: Expanded form (supplied) Standard combinations Sizes and Type Table Type ØH min. a ØH max. b ØJ min. a ØJ max. b P ±10% R ± 15% T ± 0.8 JO ± 10% HW ± 1.5 JW ± 0.8 S ± 1.5 313F322 23.8 9.9 17.2 6.6 105.9 11.6 1.3 86.3 1.5 1.5 1.5 313F332 27.1 13.2 20.8 7.6 121.1 12.1 1.3 98.5 1.5 1.5 1.5 313F343 30.9 18.5 24.3 8.9 138.6 12.1 1.3 112.7 1.7 1.5 1.7 313F353 35.6 22.1 28.7 10.1 159.5 12.1 1.3 130.8 1.7 1.5 1.7 313F364 38.8 28.2 31.4 10.9 177.8 13.9 1.8 142.2 1.7 1.5 1.7 313F374 42.2 32.2 38.3 12.7 203.2 15.2 1.8 163.0 1.7 1.5 1.7 313F385 51.5 45.4 45.4 14.9 203.2 15.2 1.8 157.7 1.7 1.7 1.7 313F396 62.7 45.4 53.3 16.7 228.6 16.0 1.8 153.1 1.7 1.7 1.7 All dimensions in mm. Subject to technical changes. Combinations ″On request″ Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.cablejoints.co.uk www.thorneanderrick.co.uk