Airfield Ground Lighting (AGL) Heat Shrink Cable Joint Kits
•
1 like•1,808 views
This document provides information on heat shrink joint kits for airfield lighting cables and traffic control cables. For airfield lighting cables, it lists part numbers for joint kits for primary and secondary cables with various connector and cable types. For traffic control cables, it similarly lists part numbers for joint kits for loop cables, feeder cables, telephone cables, and motorway cables. The joint kits are approved for use on UK military and civilian airports and by the UK's Department of Transport.
Report
Share
Report
Share
Download to read offline
Recommended
3M Scotchcast 82 A3 Airfield Lighting Joint Kits, 70 120sqmm Data Sheet
3M Scotchcast 82 A3 Airfield Lighting Joint Kits, 70 120sqmm Data SheetThorne & Derrick International
The document discusses 3M's airfield ground lighting kits for joining and terminating low voltage cables. It describes the 82 Series in-line joint kit which is designed for single core screened cables up to 5kV and multi-core unarmored cables up to 1.1kV. It also describes the AGL series kit which is available in heat shrink or cold shrink versions and is approved by the UK Ministry of Defence and Department of the Environment. The kit is suitable for different cable diameters and configurations including unscreened, screened, and externally earthed cables.Airfield Ground Lighting Cables - 5kV Single Core 6sqmm (Primary & Secondary)
Airfield Ground Lighting Cables - 5kV Single Core 6sqmm (Primary & Secondary)Thorne & Derrick International
This document provides specifications for 5kV airfield lighting cables. The cables meet FAA and British Standards for conductor insulation materials and testing. They are rated for a voltage of 5kV and tested to detect porosity in the insulation and sheath. The cables can be installed at a minimum temperature of +5°C and are available with customized color coding for the insulation and sheath. Technical data is provided for a cable with a 6.0mm2 cross section including stranding, insulation/sheath thickness, diameter, resistance, and weight.Nexans Airfield Ground Lighting Cables (Primary Secondary)
This document provides information on various types of cables for airfield lighting applications, including:
- Primary circuit cables used between constant current regulators and transformers, including the FLYCY, FL2XCY, FL2XCYRY, RHDt, and RHV cables.
- Secondary circuit cables used between transformers and lights, including the H07RN-F and FLGG cables.
- 400Hz cables including the RHEYGROUND, RHEYCORD, and RHEYPUR cables.
- It provides specifications for each cable type including conductor material and size, insulation material, screening, outer sheath material, voltage rating, temperature rating, bending radius, and applicable standards.
Electrical component at airport for airfield lighting circuit
Construction and Installation of Components Affecting Airfield Lighting Circuits Reliability and Performance
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kV
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kVThorne & Derrick International
This document provides information on heat shrink joints for low voltage cables. It describes the components of the joints, which include adhesive lined tubes, armour cages, rings and clamps, and heat shrink tubes. The joints are intended for voltages up to 3.3kV and cable sizes ranging from 1.5mm2 to 630mm2. Part numbers are provided for single core and multicore joints for XLPE, PILC and transition cables. The joints are designed to meet industry standards and have an unlimited shelf life.Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...Thorne & Derrick International
This document provides information on heat shrink terminations for low voltage PILC cables ranging from 0.6/1kV. It lists the part numbers, cable ranges, and tail lengths for single core and 3 core indoor/outdoor heat shrink terminations for XLPE and PILC cables ranging from 1.9/3.6kV. It also lists part numbers for 3/4 core PILC cable terminations ranging from 4-300mm2 with tail lengths of 600mm or 1000mm. An note indicates that for 4 core terminations, the last digit of the part number should read -4.Ellis Patents Phoenix Cable Cleats - Fire Proof Resistant Cable Cleats
Ellis Patents Phoenix Cable Cleats - Fire Proof Resistant Cable CleatsThorne & Derrick International
The Phoenix Cable Clamp datasheet summarizes fire resistance testing and specifications for various cable clamp models. Short circuit testing was completed successfully in accordance with IEC 61914:2009. The cable clamps are manufactured from 316L Stainless Steel and comply with fire resistance standards BS 8491:2008 and BS 5839-1: 2002. Dimensions, weight, cable diameter ranges and fixing holes are provided for each model number.SPS Heat Shrink Terminations XLPE/SWA/PVC Cables 0.6/1kV
The document provides information on heat shrink cable terminations for XLPE/SWA/PVC cables with voltages up to 1kV. It lists the available part numbers for 2, 3, and 4 core cable termination kits along with the applicable cable size ranges. Optional accessories include longer tail lengths for the core tubes, bolt-on earth glands, and test reports. Contact and product information is also provided for the manufacturer.
Recommended
3M Scotchcast 82 A3 Airfield Lighting Joint Kits, 70 120sqmm Data Sheet
3M Scotchcast 82 A3 Airfield Lighting Joint Kits, 70 120sqmm Data SheetThorne & Derrick International
The document discusses 3M's airfield ground lighting kits for joining and terminating low voltage cables. It describes the 82 Series in-line joint kit which is designed for single core screened cables up to 5kV and multi-core unarmored cables up to 1.1kV. It also describes the AGL series kit which is available in heat shrink or cold shrink versions and is approved by the UK Ministry of Defence and Department of the Environment. The kit is suitable for different cable diameters and configurations including unscreened, screened, and externally earthed cables.Airfield Ground Lighting Cables - 5kV Single Core 6sqmm (Primary & Secondary)
Airfield Ground Lighting Cables - 5kV Single Core 6sqmm (Primary & Secondary)Thorne & Derrick International
This document provides specifications for 5kV airfield lighting cables. The cables meet FAA and British Standards for conductor insulation materials and testing. They are rated for a voltage of 5kV and tested to detect porosity in the insulation and sheath. The cables can be installed at a minimum temperature of +5°C and are available with customized color coding for the insulation and sheath. Technical data is provided for a cable with a 6.0mm2 cross section including stranding, insulation/sheath thickness, diameter, resistance, and weight.Nexans Airfield Ground Lighting Cables (Primary Secondary)
This document provides information on various types of cables for airfield lighting applications, including:
- Primary circuit cables used between constant current regulators and transformers, including the FLYCY, FL2XCY, FL2XCYRY, RHDt, and RHV cables.
- Secondary circuit cables used between transformers and lights, including the H07RN-F and FLGG cables.
- 400Hz cables including the RHEYGROUND, RHEYCORD, and RHEYPUR cables.
- It provides specifications for each cable type including conductor material and size, insulation material, screening, outer sheath material, voltage rating, temperature rating, bending radius, and applicable standards.
Electrical component at airport for airfield lighting circuit
Construction and Installation of Components Affecting Airfield Lighting Circuits Reliability and Performance
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kV
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kVThorne & Derrick International
This document provides information on heat shrink joints for low voltage cables. It describes the components of the joints, which include adhesive lined tubes, armour cages, rings and clamps, and heat shrink tubes. The joints are intended for voltages up to 3.3kV and cable sizes ranging from 1.5mm2 to 630mm2. Part numbers are provided for single core and multicore joints for XLPE, PILC and transition cables. The joints are designed to meet industry standards and have an unlimited shelf life.Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...Thorne & Derrick International
This document provides information on heat shrink terminations for low voltage PILC cables ranging from 0.6/1kV. It lists the part numbers, cable ranges, and tail lengths for single core and 3 core indoor/outdoor heat shrink terminations for XLPE and PILC cables ranging from 1.9/3.6kV. It also lists part numbers for 3/4 core PILC cable terminations ranging from 4-300mm2 with tail lengths of 600mm or 1000mm. An note indicates that for 4 core terminations, the last digit of the part number should read -4.Ellis Patents Phoenix Cable Cleats - Fire Proof Resistant Cable Cleats
Ellis Patents Phoenix Cable Cleats - Fire Proof Resistant Cable CleatsThorne & Derrick International
The Phoenix Cable Clamp datasheet summarizes fire resistance testing and specifications for various cable clamp models. Short circuit testing was completed successfully in accordance with IEC 61914:2009. The cable clamps are manufactured from 316L Stainless Steel and comply with fire resistance standards BS 8491:2008 and BS 5839-1: 2002. Dimensions, weight, cable diameter ranges and fixing holes are provided for each model number.SPS Heat Shrink Terminations XLPE/SWA/PVC Cables 0.6/1kV
The document provides information on heat shrink cable terminations for XLPE/SWA/PVC cables with voltages up to 1kV. It lists the available part numbers for 2, 3, and 4 core cable termination kits along with the applicable cable size ranges. Optional accessories include longer tail lengths for the core tubes, bolt-on earth glands, and test reports. Contact and product information is also provided for the manufacturer.
3M LCT1 Cold Shrink Termination Kit 35-50sqmm, 0.6/1kV-3.3kV
This document summarizes 3M's cold shrink joints and terminations for low voltage cables. It describes how the products use prestretched tubes that shrink to provide a waterproof seal over cable connections or terminations. Various kits are listed for splicing or abandoning different cable types and voltages, ranging from 0.6/1kV to 6.6kV. Installation is simple with no special tools or heat required. The products are resistant to environmental factors and suitable for indoor and outdoor use.
Prysmian FP400 Fire Resistant & fire performance cables
Prysmian FP400® is a fire resistant armoured cable that provides a robust wiring system that maintains circuit integrity during a fire. It produces very low smoke and acid gases, protecting human life and equipment. FP400® installs and terminates easily like a standard armoured cable without special tools. It is suitable for indoor or outdoor installation, including direct burial. FP400® meets various British and European fire safety standards for fire resistant cables.
Instrumentation cables rev2
This document provides information on instrumentation cables, including their purpose, applicable standards, typical configurations, conductor types, insulation, screening, armoring, sheathing, and protection. Instrumentation cables are multiple conductor cables that convey low energy electrical signals for industrial processes. They are commonly used in industrial projects to connect electrical instrument circuits and provide communication services around process plants. The document discusses cable components, materials, and specifications according to various standards like BS 5308.
Fire Resistant Cable Joints
This document discusses low voltage zero halogen cable joints that provide limited fire hazard. It offers:
1) A comprehensive range of heat shrink joints for single and multicore low smoke fume zero halogen cables that have been fire tested and compliant with London Underground standards.
2) Joints that incorporate flame retardant, non-halogen heat shrink tubing and a flexible outer fire barrier tube to provide a high degree of fire resistance.
3) Easy to use joints that are slim in profile and can be installed horizontally or vertically with an unlimited shelf life. Part numbers and cable ranges supported are provided.
Instruction- 3 Core Polymeric (XLPE EPR) 6.6kV-7.2kV Heat Shrink Cable Termin...
Instruction- 3 Core Polymeric (XLPE EPR) 6.6kV-7.2kV Heat Shrink Cable Termin...Thorne & Derrick International
This document provides installation instructions for heatshrink termination of 3 core polymeric cables between 7.2kV and 36kV. It describes preparing the cable by removing the outer sheath and screen layers. It then details applying stress control tape and tubes, installing lugs and a breakout boot, and applying an anti-track tube. It provides requirements for indoor terminations including separation distances and positioning cores. It also describes installing rain sheds for outdoor terminations and notes on minimum bending radii during installation.CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...Thorne & Derrick International
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP CIEL Cast Integral Earth Lug - Aluminium HV Cable Glands
High voltage single core power cables (3.3kV, 6.6kV, 11kV, 33kV) can generate high fault current ratings via aluminium wire armours (AWA) where the actual fault current may exceed that of the standard CMP earth tag - it is vital for low and high voltage electrical safety to match the rated fault current of the cable gland earth tag to that of the cable armour. CMP unique Cast Integral Earth Lug (CIEL) cable gland designs overcome potential overheating and possible flash over problems - CMP BW CIEL, CMP CW CIEL, CMP E1W CIEL, CMP E1FW CIEL, CMP E2W CIEL and CMP E2FW CIEL cable gland ranges.
CMP CIEL 20S to 40mm - 26.0kA for 1 second short circuit fault rating
CMP CIEL 50s to 90mm - 43.0kA for 1 second short circuit fault rating
CMP Cast Integral Earth Lug (CIEL) Aluminium Cable Glands IP66 for SWA Cable Termination at High Voltage - Specification
CMP CW CIEL type aluminium cable gland for use with all types of low voltage and high voltage Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. All CMP cable glands are EMC Tested. CMP CW CIEL range of industrial aluminium cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from aluminium. The CW CIEL aluminium cable gland provides a high fault current rated cable termination complete with a CMP unique Cast Integral Earth Lug concept - especially suitable for medium and high voltage electrical cables and systems where a high level of protection against short circuit earth fault currents is required.
RAYCHEM TERMINATION KIT-TYCO TERMINATION-케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
This document provides installation instructions for terminating screened single core polymeric insulated cables without armour from 7.2 kV to 36 kV. The instructions summarize preparing the cable by removing the outer sheath and cleaning the insulation. They describe applying sealant tape and void filling strips before installing stress control tubing and sealing tubing. Specific steps vary depending on the cable having wire shielding or metal tape shielding. Dimensions for cutting back materials and positioning heat shrink tubing skirts are provided. General safety instructions recommend using a propane torch, avoiding scorching, and disposing of waste properly.
Instrumentation Cables - Nuhas Oman Catalogue
This document describes Nuhas Oman LLC, a producer of cables and copper products. It provides details about their state-of-the-art facilities, high quality standards, and product certifications. Tables are included that list technical specifications for various instrumentation cable types, including unarmored and armored cables with different conductor sizes and configurations. The document emphasizes Nuhas Oman's commitment to total quality management and product excellence.
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...Thorne & Derrick International
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (Supply)
CMP A324 Zen insulated aluminium cable glands are suitable for the cable termination of all low voltage and high voltage aluminium wire armoured (AWA) cables, indoor and outdoor with IP66 seal - CMP A324 Zen insulated aluminium cable glands feature CMP Cast Integral Earth Lug (CIEL) allowing the zoning of earth connections for earthed neutral systems.
CMP Zen Insulated Cable Glands - High Voltage Cable Termination with Brass or Aluminium Cable Glands
In the power generation industry unless special measures are taken to both segregate LV-HV cables in accordance with wiring regulations, and also isolate the metallic cable armour from running in continuous contact throughout the whole of the earthing system, interference or electrical noise would spread throughout the plant. CMP Zen Insulated cable gland system allows cables to be earthed at one end only - single point earthing - and insulated at the field end. Insulated Zen cable glands are available to ensure that no contact is made between the earth circuit carried through the cable armour and the low-high voltage electrical enclosure which the cable enters. CMP Zen Insulated cable glands permit electrical design engineers to implement safe earthing systems to deal with :
*Cross Talk Noise Reduction
*Electrical Separation of Main Earths
*Earth Fault Segregation
*Fault Current Reduction with Series Cable Resistance
*Electrical Noise Reduction in Instrument Cables
*Circulating Current Production in Single or 3 Core High Voltage Cables
CMP Zen Insulated Cable Glands - CMP A324 & A348
CMP Zen Insulated cable glands are suitable for use with all aluminium wire armoured (AWA) cables providing an IP66 environmental seal on the cable outer sheath. CMP A324 Zen glands feature Cast Integral Earth Lug (CIEL) suitable for high voltage power cable systems where a high level of protection against fault currents is required - CMP's unique cable glanding concept effectively insulates the gland and cable armour from the electrical equipment eliminating circulating currents. CMP Zen A324 cable gland is usually installed at the supply end of the cable and Zen A348 cable gland at the load end - suitable for 3.3kV, 6.6kV, 11kV and 33kV single core AWA high voltage power cable glanding.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CMP E1FX Hazardous Area Flameproof ATEX Cable Glands for Wire Braided Cables ...
CMP E1FX Hazardous Area Flameproof ATEX Cable Glands for Wire Braided Cables ...Thorne & Derrick International
The document provides technical specifications for the E1FX Tri-Star Flameproof, Increased Safety and Restricted Breathing cable gland, including its certifications, materials, sizing options, and compliance with various international standards for use in hazardous areas. It also includes ordering information and references to the company's other hazardous area products such as cable joints, terminations, and other accessories.Heat Shrink Cable Terminations - High Voltage Cable Terminations, 6.6kV 3 Co...
Heat Shrink Cable Terminations - High Voltage Cable Terminations, 6.6kV 3 Co...Thorne & Derrick International
SPS High Voltage Cable Termination Kit List (Typical) - Three Core Cables
XLPE EPR HV Termination Kits
Anti-track heat shrink 3 core tubes x 3
Stress control heat shrink 3 core tubes x 3
Yellow stress relief tape for screen ends x 3
3 core heat shrink cable breakout boot x 1
Red mastic sealing tape x 1
Cable cleaning and de-greasing wipes x 3
Box, label, jointing instructions x 1
HV Termination Kits Optional Extras, 3 Core 6.6-7.2kV - Solderless Earth Kit for Copper Tape Screen Cables, Insulating Bushing Boots (Straight, Right Angled, Universal), HV Cable Glands for SWA Cable (Bolt-on Top Hat), Outdoor Armour Earthing Kit, Outdoor Stand-off Brackets + Insulators, High Voltage HV Cable Lugs (Crimp or Mechanical Shearbolt Lugs).
SPS High Voltage Heat Shrink Cable Termination Kits, 6.6-7.2kV - Testing
SPS high voltage heat shrink termination kits for 3 core HV cables (XLPE and EPR) are Tested and Certified to latest International Test Standards as outlined in Cenelec standards HD 628 S1 and 629.1 S2 : 2006 - high voltage cable termination kit testing also encompasses VDE 0278 and IEC 60502.
SPS Low Voltage Live Pot End Kits - Heat Shrink Pot End Joints & Live Cable E...
SPS Low Voltage Live Pot End Kits - Heat Shrink Pot End Joints & Live Cable E...Thorne & Derrick International
The document provides information about low voltage live pot end kits and low voltage cable abandonment kits from Shrink Polymer Systems. It lists the product codes and applicable cable types (PILC or XLPE) for popular 4, 3, and 2 core kit configurations for sealing cable ends on live cables or abandoning cables. Kits are available for cable cross-sections between 4-400mm2. Custom kits can also be provided for any cable type if details are given.Prysmian JEM Resin FP400 4 Core 10sqmm Fire Performance Cable Joint - FRZHMPJ2
Prysmian JEM Resin FP400 4 Core 10sqmm Fire Performance Cable Joint - FRZHMPJ2Thorne & Derrick International
This document summarizes Prysmian's FRZHMPJ low voltage fire performance cable joint kits. It provides details on the features of the joints, including the low hazard isocyanate-free JEM resin used, fire retardant and LSOH glass reinforced phenolic joint shells, and slim-line design. Technical data is given on the joints passing fire resistance tests to BS 6387 categories C, W and Z. Reference codes and dimensions are listed for joints with copper conductors from 4mm2 to 400mm2.Instrumentation Cable
This document summarizes the key components of instrumentation cable and their purposes. It discusses the conductor, insulation, cabling elements, individual screen, assembling of cable elements, overall screen, shielding, inner sheath, armour, and outer sheath. The conductor is typically copper and can be solid or multistranded. Insulation protects individual conductors and varies based on voltage rating. Screens and sheaths protect signals and the cable internally and externally. Requirements for the outer sheath include oxygen index, acid generation, smoke density, and flammability standards.
Raychem saudi arabia ltd. high voltage , medium voltage & low voltage cab...
Raychem Saudi Arabia Ltd. High Voltage , Medium Voltage & Low Voltage Cable Joints, Termination Kits & Heat Shrinkable Tubing
Raychem Heat Shrink - Raychem Tyco Heat Shrink Tubing And Sleeving
The document provides information on various cable accessories for low voltage cables up to 1 kV, medium voltage cables up to 42 kV, and high voltage cables up to 170 kV. It lists the page numbers for sections on different cable accessories, including joints, terminations, connectors, fittings, insulators, insulation, surge arrestors, switching equipment, and power measurement and control devices. It also provides brief descriptions and product literature references for some highlighted cable accessories.
Ellis Patents Aluminium Two Hole Cable Clamps - Aluminium Cable Cleats
Ellis Patents Aluminium Two Hole Cable Clamps - Aluminium Cable CleatsThorne & Derrick International
Cast aluminium alloy cable cleats are designed for securing cables in industrial and outdoor environments. The cleats are manufactured from LM6 aluminium alloy and can be epoxy coated for harsh conditions like sea air. The document provides a selection table and specifications for 12 different two-hole cable clamp models, including their cable capacity range, dimensions, fixing points, and part numbers. It also lists the results of testing the cleats according to the European standard for cable cleats.Alroc Insulation Chamfering Tools-8YR0-NO2 (LHC2)
The document provides information about ALROC insulation chamfering tools models LHC2 through LHC5. It lists the insulation diameter ranges for each tool model, along with the corresponding reference code and weight. The tools are used to perform straight or tapered cuts on the insulation of cable extremities and are delivered in wooden boxes.
Marechal Distribution Boxes - Marechal Express Boxes, Marechal Express Fire B...
Marechal Distribution Boxes - Marechal Express Boxes, Marechal Express Fire B...Thorne & Derrick International
Industrial & Hazardous Area (ATEX) Plugs
Marechal Distribution Boxes
Marechal Electric - Plugs, Sockets & Decontactors
The Marechal distribution boxes cover a wide range of electrical installations: connecting power outlets and boxes. The Marechal boxes are particularly suited to power supply in tunnels.
Marechal Distribution Box Benefits
Equipment for tunnels
Boxes for distribution, tap-offs, liquefied gas transfer, service and terminals
Marechal Distribution Box Range:
Marechal Express Boxes - Distribution Boxes For Standard Lighting
Marechal Express Fire Boxes - Distribution Boxes For Emergency Lighting
Marechal F400 - Wall Mounting Socket-Outlet For Jet Fans
Marechal BF - Fire Department Boxes
Marechal CD - Distribution Boxes & Socket-Outlets With Protection
Marechal BM - Modular Distribution Boxes
Marechal BG - Box For Liquefied Gas Transfer
Marechal BRP - Portable Service BoxSPS - LV MV Heat Shrink Cable Joints & Terminations (Full Catalogue)
The document provides information on cable accessories including terminations, joints, heat shrink components, connectors, tapes and tools. It lists various termination kits for single core and three core XLPE and PILC cables from 0.6kV to 33kV. Joints listed include triplex joints for 12kV cables, universal heat shrink joints for 7.2/12kV, 3 core joints for 17.5-33kV cables, and cold shrink joints for 7.2-33kV. Accessories such as heat shrink tubing, anti-track materials, and compression lugs are also listed. The company is based in the UK and specializes in heat shrink and cold shrink cable joints and terminations
Shrink Polymer Systems - Heat Shrink Cable Joints & Cable Terminations, Low ...
Shrink Polymer Systems - Heat Shrink Cable Joints & Cable Terminations, Low ...Thorne & Derrick International
Shrink Polymer Systems high voltage (HV) heat shrink cable joints, cable terminations and busbar tape and tubings for 6.6kV, 11kV, 24kV and 33kV.
SPS HV Cable Joints - Straight, transition, pot-end, trifurcating and branch cable joints for both polymeric and paper cables, 11kV-33kV.
SPS HV Cable Terminations - Single and 3 core, indoor and outdoor high voltage cable terminations for both polymeric and paper cables, 11kV-33kV.
SPS 6.6kV, 11kV and 33kV heat shrink cable joint kits and cable termination kits are quick and easy to install by trained HV jointers providing high reliability and excellent performance for high voltage cable circuits. SPS heat shrink cable termination and joint kits are suitable for three and single core XLPE, EPR and PILC cables, including utility specification Triplex cables 11kV-33kV.
SPS heat shrink cable joints and cable terminations are Tested to International Standards outlined in Cenelec HD 628 S1 and 629.1 S2 : 2006 - encompassing VDE 0278 and IEC 60502 - peace of mind performance.
THORNE & DERRICK UK are Exclusive UK Distributors for SPS Shrink Polymer Systems. T&D SPS provide the most competitive prices, largest stocks and first class service for LV-HV cable joints, cable terminations and accessories up to 33kV.
Tested to Cenelec, VDE, IEC Standards - save time and money without compromising high voltage cable installations.
T&D supply LV-HV Cable Accessories, Cable Jointing & Electrical Eqpt - we service UK and global contractors involved in cable installations, cable jointing, substation and electrical construction at LV, 11kV, 33kV and EHV. We export to utilities, power, construction, rail, mining, offshore, oil, gas and petrochemical industries.
More Related Content
What's hot
3M LCT1 Cold Shrink Termination Kit 35-50sqmm, 0.6/1kV-3.3kV
This document summarizes 3M's cold shrink joints and terminations for low voltage cables. It describes how the products use prestretched tubes that shrink to provide a waterproof seal over cable connections or terminations. Various kits are listed for splicing or abandoning different cable types and voltages, ranging from 0.6/1kV to 6.6kV. Installation is simple with no special tools or heat required. The products are resistant to environmental factors and suitable for indoor and outdoor use.
Prysmian FP400 Fire Resistant & fire performance cables
Prysmian FP400® is a fire resistant armoured cable that provides a robust wiring system that maintains circuit integrity during a fire. It produces very low smoke and acid gases, protecting human life and equipment. FP400® installs and terminates easily like a standard armoured cable without special tools. It is suitable for indoor or outdoor installation, including direct burial. FP400® meets various British and European fire safety standards for fire resistant cables.
Instrumentation cables rev2
This document provides information on instrumentation cables, including their purpose, applicable standards, typical configurations, conductor types, insulation, screening, armoring, sheathing, and protection. Instrumentation cables are multiple conductor cables that convey low energy electrical signals for industrial processes. They are commonly used in industrial projects to connect electrical instrument circuits and provide communication services around process plants. The document discusses cable components, materials, and specifications according to various standards like BS 5308.
Fire Resistant Cable Joints
This document discusses low voltage zero halogen cable joints that provide limited fire hazard. It offers:
1) A comprehensive range of heat shrink joints for single and multicore low smoke fume zero halogen cables that have been fire tested and compliant with London Underground standards.
2) Joints that incorporate flame retardant, non-halogen heat shrink tubing and a flexible outer fire barrier tube to provide a high degree of fire resistance.
3) Easy to use joints that are slim in profile and can be installed horizontally or vertically with an unlimited shelf life. Part numbers and cable ranges supported are provided.
Instruction- 3 Core Polymeric (XLPE EPR) 6.6kV-7.2kV Heat Shrink Cable Termin...
Instruction- 3 Core Polymeric (XLPE EPR) 6.6kV-7.2kV Heat Shrink Cable Termin...Thorne & Derrick International
This document provides installation instructions for heatshrink termination of 3 core polymeric cables between 7.2kV and 36kV. It describes preparing the cable by removing the outer sheath and screen layers. It then details applying stress control tape and tubes, installing lugs and a breakout boot, and applying an anti-track tube. It provides requirements for indoor terminations including separation distances and positioning cores. It also describes installing rain sheds for outdoor terminations and notes on minimum bending radii during installation.CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...Thorne & Derrick International
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP CIEL Cast Integral Earth Lug - Aluminium HV Cable Glands
High voltage single core power cables (3.3kV, 6.6kV, 11kV, 33kV) can generate high fault current ratings via aluminium wire armours (AWA) where the actual fault current may exceed that of the standard CMP earth tag - it is vital for low and high voltage electrical safety to match the rated fault current of the cable gland earth tag to that of the cable armour. CMP unique Cast Integral Earth Lug (CIEL) cable gland designs overcome potential overheating and possible flash over problems - CMP BW CIEL, CMP CW CIEL, CMP E1W CIEL, CMP E1FW CIEL, CMP E2W CIEL and CMP E2FW CIEL cable gland ranges.
CMP CIEL 20S to 40mm - 26.0kA for 1 second short circuit fault rating
CMP CIEL 50s to 90mm - 43.0kA for 1 second short circuit fault rating
CMP Cast Integral Earth Lug (CIEL) Aluminium Cable Glands IP66 for SWA Cable Termination at High Voltage - Specification
CMP CW CIEL type aluminium cable gland for use with all types of low voltage and high voltage Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. All CMP cable glands are EMC Tested. CMP CW CIEL range of industrial aluminium cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from aluminium. The CW CIEL aluminium cable gland provides a high fault current rated cable termination complete with a CMP unique Cast Integral Earth Lug concept - especially suitable for medium and high voltage electrical cables and systems where a high level of protection against short circuit earth fault currents is required.
RAYCHEM TERMINATION KIT-TYCO TERMINATION-케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
This document provides installation instructions for terminating screened single core polymeric insulated cables without armour from 7.2 kV to 36 kV. The instructions summarize preparing the cable by removing the outer sheath and cleaning the insulation. They describe applying sealant tape and void filling strips before installing stress control tubing and sealing tubing. Specific steps vary depending on the cable having wire shielding or metal tape shielding. Dimensions for cutting back materials and positioning heat shrink tubing skirts are provided. General safety instructions recommend using a propane torch, avoiding scorching, and disposing of waste properly.
Instrumentation Cables - Nuhas Oman Catalogue
This document describes Nuhas Oman LLC, a producer of cables and copper products. It provides details about their state-of-the-art facilities, high quality standards, and product certifications. Tables are included that list technical specifications for various instrumentation cable types, including unarmored and armored cables with different conductor sizes and configurations. The document emphasizes Nuhas Oman's commitment to total quality management and product excellence.
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...Thorne & Derrick International
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (Supply)
CMP A324 Zen insulated aluminium cable glands are suitable for the cable termination of all low voltage and high voltage aluminium wire armoured (AWA) cables, indoor and outdoor with IP66 seal - CMP A324 Zen insulated aluminium cable glands feature CMP Cast Integral Earth Lug (CIEL) allowing the zoning of earth connections for earthed neutral systems.
CMP Zen Insulated Cable Glands - High Voltage Cable Termination with Brass or Aluminium Cable Glands
In the power generation industry unless special measures are taken to both segregate LV-HV cables in accordance with wiring regulations, and also isolate the metallic cable armour from running in continuous contact throughout the whole of the earthing system, interference or electrical noise would spread throughout the plant. CMP Zen Insulated cable gland system allows cables to be earthed at one end only - single point earthing - and insulated at the field end. Insulated Zen cable glands are available to ensure that no contact is made between the earth circuit carried through the cable armour and the low-high voltage electrical enclosure which the cable enters. CMP Zen Insulated cable glands permit electrical design engineers to implement safe earthing systems to deal with :
*Cross Talk Noise Reduction
*Electrical Separation of Main Earths
*Earth Fault Segregation
*Fault Current Reduction with Series Cable Resistance
*Electrical Noise Reduction in Instrument Cables
*Circulating Current Production in Single or 3 Core High Voltage Cables
CMP Zen Insulated Cable Glands - CMP A324 & A348
CMP Zen Insulated cable glands are suitable for use with all aluminium wire armoured (AWA) cables providing an IP66 environmental seal on the cable outer sheath. CMP A324 Zen glands feature Cast Integral Earth Lug (CIEL) suitable for high voltage power cable systems where a high level of protection against fault currents is required - CMP's unique cable glanding concept effectively insulates the gland and cable armour from the electrical equipment eliminating circulating currents. CMP Zen A324 cable gland is usually installed at the supply end of the cable and Zen A348 cable gland at the load end - suitable for 3.3kV, 6.6kV, 11kV and 33kV single core AWA high voltage power cable glanding.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CMP E1FX Hazardous Area Flameproof ATEX Cable Glands for Wire Braided Cables ...
CMP E1FX Hazardous Area Flameproof ATEX Cable Glands for Wire Braided Cables ...Thorne & Derrick International
The document provides technical specifications for the E1FX Tri-Star Flameproof, Increased Safety and Restricted Breathing cable gland, including its certifications, materials, sizing options, and compliance with various international standards for use in hazardous areas. It also includes ordering information and references to the company's other hazardous area products such as cable joints, terminations, and other accessories.Heat Shrink Cable Terminations - High Voltage Cable Terminations, 6.6kV 3 Co...
Heat Shrink Cable Terminations - High Voltage Cable Terminations, 6.6kV 3 Co...Thorne & Derrick International
SPS High Voltage Cable Termination Kit List (Typical) - Three Core Cables
XLPE EPR HV Termination Kits
Anti-track heat shrink 3 core tubes x 3
Stress control heat shrink 3 core tubes x 3
Yellow stress relief tape for screen ends x 3
3 core heat shrink cable breakout boot x 1
Red mastic sealing tape x 1
Cable cleaning and de-greasing wipes x 3
Box, label, jointing instructions x 1
HV Termination Kits Optional Extras, 3 Core 6.6-7.2kV - Solderless Earth Kit for Copper Tape Screen Cables, Insulating Bushing Boots (Straight, Right Angled, Universal), HV Cable Glands for SWA Cable (Bolt-on Top Hat), Outdoor Armour Earthing Kit, Outdoor Stand-off Brackets + Insulators, High Voltage HV Cable Lugs (Crimp or Mechanical Shearbolt Lugs).
SPS High Voltage Heat Shrink Cable Termination Kits, 6.6-7.2kV - Testing
SPS high voltage heat shrink termination kits for 3 core HV cables (XLPE and EPR) are Tested and Certified to latest International Test Standards as outlined in Cenelec standards HD 628 S1 and 629.1 S2 : 2006 - high voltage cable termination kit testing also encompasses VDE 0278 and IEC 60502.
SPS Low Voltage Live Pot End Kits - Heat Shrink Pot End Joints & Live Cable E...
SPS Low Voltage Live Pot End Kits - Heat Shrink Pot End Joints & Live Cable E...Thorne & Derrick International
The document provides information about low voltage live pot end kits and low voltage cable abandonment kits from Shrink Polymer Systems. It lists the product codes and applicable cable types (PILC or XLPE) for popular 4, 3, and 2 core kit configurations for sealing cable ends on live cables or abandoning cables. Kits are available for cable cross-sections between 4-400mm2. Custom kits can also be provided for any cable type if details are given.Prysmian JEM Resin FP400 4 Core 10sqmm Fire Performance Cable Joint - FRZHMPJ2
Prysmian JEM Resin FP400 4 Core 10sqmm Fire Performance Cable Joint - FRZHMPJ2Thorne & Derrick International
This document summarizes Prysmian's FRZHMPJ low voltage fire performance cable joint kits. It provides details on the features of the joints, including the low hazard isocyanate-free JEM resin used, fire retardant and LSOH glass reinforced phenolic joint shells, and slim-line design. Technical data is given on the joints passing fire resistance tests to BS 6387 categories C, W and Z. Reference codes and dimensions are listed for joints with copper conductors from 4mm2 to 400mm2.Instrumentation Cable
This document summarizes the key components of instrumentation cable and their purposes. It discusses the conductor, insulation, cabling elements, individual screen, assembling of cable elements, overall screen, shielding, inner sheath, armour, and outer sheath. The conductor is typically copper and can be solid or multistranded. Insulation protects individual conductors and varies based on voltage rating. Screens and sheaths protect signals and the cable internally and externally. Requirements for the outer sheath include oxygen index, acid generation, smoke density, and flammability standards.
Raychem saudi arabia ltd. high voltage , medium voltage & low voltage cab...
Raychem Saudi Arabia Ltd. High Voltage , Medium Voltage & Low Voltage Cable Joints, Termination Kits & Heat Shrinkable Tubing
Raychem Heat Shrink - Raychem Tyco Heat Shrink Tubing And Sleeving
The document provides information on various cable accessories for low voltage cables up to 1 kV, medium voltage cables up to 42 kV, and high voltage cables up to 170 kV. It lists the page numbers for sections on different cable accessories, including joints, terminations, connectors, fittings, insulators, insulation, surge arrestors, switching equipment, and power measurement and control devices. It also provides brief descriptions and product literature references for some highlighted cable accessories.
Ellis Patents Aluminium Two Hole Cable Clamps - Aluminium Cable Cleats
Ellis Patents Aluminium Two Hole Cable Clamps - Aluminium Cable CleatsThorne & Derrick International
Cast aluminium alloy cable cleats are designed for securing cables in industrial and outdoor environments. The cleats are manufactured from LM6 aluminium alloy and can be epoxy coated for harsh conditions like sea air. The document provides a selection table and specifications for 12 different two-hole cable clamp models, including their cable capacity range, dimensions, fixing points, and part numbers. It also lists the results of testing the cleats according to the European standard for cable cleats.Alroc Insulation Chamfering Tools-8YR0-NO2 (LHC2)
The document provides information about ALROC insulation chamfering tools models LHC2 through LHC5. It lists the insulation diameter ranges for each tool model, along with the corresponding reference code and weight. The tools are used to perform straight or tapered cuts on the insulation of cable extremities and are delivered in wooden boxes.
Marechal Distribution Boxes - Marechal Express Boxes, Marechal Express Fire B...
Marechal Distribution Boxes - Marechal Express Boxes, Marechal Express Fire B...Thorne & Derrick International
Industrial & Hazardous Area (ATEX) Plugs
Marechal Distribution Boxes
Marechal Electric - Plugs, Sockets & Decontactors
The Marechal distribution boxes cover a wide range of electrical installations: connecting power outlets and boxes. The Marechal boxes are particularly suited to power supply in tunnels.
Marechal Distribution Box Benefits
Equipment for tunnels
Boxes for distribution, tap-offs, liquefied gas transfer, service and terminals
Marechal Distribution Box Range:
Marechal Express Boxes - Distribution Boxes For Standard Lighting
Marechal Express Fire Boxes - Distribution Boxes For Emergency Lighting
Marechal F400 - Wall Mounting Socket-Outlet For Jet Fans
Marechal BF - Fire Department Boxes
Marechal CD - Distribution Boxes & Socket-Outlets With Protection
Marechal BM - Modular Distribution Boxes
Marechal BG - Box For Liquefied Gas Transfer
Marechal BRP - Portable Service BoxWhat's hot (20)
3M LCT1 Cold Shrink Termination Kit 35-50sqmm, 0.6/1kV-3.3kV
3M LCT1 Cold Shrink Termination Kit 35-50sqmm, 0.6/1kV-3.3kV
Prysmian FP400 Fire Resistant & fire performance cables
Prysmian FP400 Fire Resistant & fire performance cables
Instruction- 3 Core Polymeric (XLPE EPR) 6.6kV-7.2kV Heat Shrink Cable Termin...
Instruction- 3 Core Polymeric (XLPE EPR) 6.6kV-7.2kV Heat Shrink Cable Termin...
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...
RAYCHEM TERMINATION KIT-TYCO TERMINATION-케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
RAYCHEM TERMINATION KIT-TYCO TERMINATION-케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
CMP E1FX Hazardous Area Flameproof ATEX Cable Glands for Wire Braided Cables ...
CMP E1FX Hazardous Area Flameproof ATEX Cable Glands for Wire Braided Cables ...
Heat Shrink Cable Terminations - High Voltage Cable Terminations, 6.6kV 3 Co...
Heat Shrink Cable Terminations - High Voltage Cable Terminations, 6.6kV 3 Co...
SPS Low Voltage Live Pot End Kits - Heat Shrink Pot End Joints & Live Cable E...
SPS Low Voltage Live Pot End Kits - Heat Shrink Pot End Joints & Live Cable E...
Prysmian JEM Resin FP400 4 Core 10sqmm Fire Performance Cable Joint - FRZHMPJ2
Prysmian JEM Resin FP400 4 Core 10sqmm Fire Performance Cable Joint - FRZHMPJ2
Raychem saudi arabia ltd. high voltage , medium voltage & low voltage cab...
Raychem saudi arabia ltd. high voltage , medium voltage & low voltage cab...
Raychem Heat Shrink - Raychem Tyco Heat Shrink Tubing And Sleeving
Raychem Heat Shrink - Raychem Tyco Heat Shrink Tubing And Sleeving
Ellis Patents Aluminium Two Hole Cable Clamps - Aluminium Cable Cleats
Ellis Patents Aluminium Two Hole Cable Clamps - Aluminium Cable Cleats
Marechal Distribution Boxes - Marechal Express Boxes, Marechal Express Fire B...
Marechal Distribution Boxes - Marechal Express Boxes, Marechal Express Fire B...
Similar to Airfield Ground Lighting (AGL) Heat Shrink Cable Joint Kits
SPS - LV MV Heat Shrink Cable Joints & Terminations (Full Catalogue)
The document provides information on cable accessories including terminations, joints, heat shrink components, connectors, tapes and tools. It lists various termination kits for single core and three core XLPE and PILC cables from 0.6kV to 33kV. Joints listed include triplex joints for 12kV cables, universal heat shrink joints for 7.2/12kV, 3 core joints for 17.5-33kV cables, and cold shrink joints for 7.2-33kV. Accessories such as heat shrink tubing, anti-track materials, and compression lugs are also listed. The company is based in the UK and specializes in heat shrink and cold shrink cable joints and terminations
Shrink Polymer Systems - Heat Shrink Cable Joints & Cable Terminations, Low ...
Shrink Polymer Systems - Heat Shrink Cable Joints & Cable Terminations, Low ...Thorne & Derrick International
Shrink Polymer Systems high voltage (HV) heat shrink cable joints, cable terminations and busbar tape and tubings for 6.6kV, 11kV, 24kV and 33kV.
SPS HV Cable Joints - Straight, transition, pot-end, trifurcating and branch cable joints for both polymeric and paper cables, 11kV-33kV.
SPS HV Cable Terminations - Single and 3 core, indoor and outdoor high voltage cable terminations for both polymeric and paper cables, 11kV-33kV.
SPS 6.6kV, 11kV and 33kV heat shrink cable joint kits and cable termination kits are quick and easy to install by trained HV jointers providing high reliability and excellent performance for high voltage cable circuits. SPS heat shrink cable termination and joint kits are suitable for three and single core XLPE, EPR and PILC cables, including utility specification Triplex cables 11kV-33kV.
SPS heat shrink cable joints and cable terminations are Tested to International Standards outlined in Cenelec HD 628 S1 and 629.1 S2 : 2006 - encompassing VDE 0278 and IEC 60502 - peace of mind performance.
THORNE & DERRICK UK are Exclusive UK Distributors for SPS Shrink Polymer Systems. T&D SPS provide the most competitive prices, largest stocks and first class service for LV-HV cable joints, cable terminations and accessories up to 33kV.
Tested to Cenelec, VDE, IEC Standards - save time and money without compromising high voltage cable installations.
T&D supply LV-HV Cable Accessories, Cable Jointing & Electrical Eqpt - we service UK and global contractors involved in cable installations, cable jointing, substation and electrical construction at LV, 11kV, 33kV and EHV. We export to utilities, power, construction, rail, mining, offshore, oil, gas and petrochemical industries.
Shrink Polymer Systems Catalogue
Our Catalogue which will include our full range of Cable Joints, Terminations and Accessories, please drop me a message for any specials.
SPS Low Voltage Zero Halogen Cable Joints For Limited Fire Hazard Cables - SP...
SPS Low Voltage Zero Halogen Cable Joints For Limited Fire Hazard Cables - SP...Thorne & Derrick International
SPS Low Voltage Zero Halogen Cable Joints For Limited Fire Hazard Cables - SPS SPANHF Heat Shrink Cable Jointing KitsSPS Heat Shrink Cable Joints & Terminations 11kV Triplex - Selection Guide
SPS Heat Shrink Cable Joints & Terminations 11kV Triplex - Selection GuideThorne & Derrick International
This document provides product information for triplex cable terminations, joints, and accessories from Shrink Polymer Systems. It lists indoor and outdoor cable termination parts for different cable ranges from 95-300mm2. It also lists heat shrink joints, heat shrink/resin combination joints, and notes that cold shrink versions and bushing protection boots are available. Mechanical lugs, ferrules, cable preparation tools, and trifurcating joints are also offered.SPS Heat Shrink Cable Glands, HCS1, 4-12mm
The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.
SPS HCS3 Heat Shrink Cable Glands 13-26mm
The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.
SPS HCS2 Heat Shrink Cable Glands 7-17mm
The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.
Heat Shrink Cable Glands - Shrink Polymer Systems
The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.
SPS HCS5 Heat Shrink Cable Glands 36-70mm
The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.
SPS HCS4 Heat Shrink Cable Glands 19-38mm
The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.
SPS HCS4s Heat Shrink Cable Glands 19-53mm
The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Atlas cable cleats suit trefoil and single way cable applications where high levels of short circuit withstand are required.
As well as providing the cables with significant mechanical support, the unique patented Atlas cable cleat design provides a choice of one bolt, two bolt or framing channel fixing options.
Manufactured in stainless and galvanised steel all range taking Atlas cable cleats are supplied with a stainless steel top bolt to eliminate eddy currents.
To protect and cushion the cables during short circuit conditions the Atlas cable cleat comes with integral LSF Zero Halogen Polymeric pads.
Ellis Patents Atlas range taking cable cleats have been tested in accordance with the European Standard of "Cable Cleats for Electrical Installations" BS EN 50368 : 2003 - Ellis Patents are the global leader in the manufacture of quality and trusted single way, trefoil, quadrafoil and range taking cable cleats.
SPS Heat Shrink Joints to Suit Low Voltage Cables 0.6/3.3kV
This document provides information on heat shrink joints for low voltage cables produced by Shrink Polymer Systems. It lists various joint types for XLPE, PILC, and transition joints between XLPE and PILC cables with voltage ratings from 600/1000V to 3.3kV. The joints are intended for underground use and provide benefits such as unlimited shelf life, compact size to allow for immediate backfill, and fire resistance. Thousands of these joints have been installed in various infrastructure projects worldwide. Part numbers are specified according to cable size and construction.
Heat Shrink Joints to Suit Single Core Low Voltage Cables Type XLPE/SWA/PVC 0...
Heat Shrink Joints to Suit Single Core Low Voltage Cables Type XLPE/SWA/PVC 0...Thorne & Derrick International
This document provides information on heat shrink joints for low voltage cables produced by Shrink Polymer Systems. It lists various joint part numbers for joining single core and multicore XLPE, PVC, PILC and transition cables with voltage ratings from 600/1000V to 3.3kV. The joints are intended for underground use and comprise adhesive lined tubes, armour supports, clamps and heat shrink outer tubes to meet BS6910-1 standards with unlimited shelf life. Thousands of these joints have been installed in critical infrastructure projects worldwide.Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...Thorne & Derrick International
Nexans Euromold Separable Elbow Connectors 158LR are designed to terminate and connect high voltage polymeric cables to electrical equipment including motors, switchgear and transformers with Type A 250Amp interface as described by CENELEC EN50180 and 50181.
Nexans Euromold Elbow Connectors type 158LR meet the requirements of CENELEC HD 629.1.
Nexans Euromold separable elbow connectors are designed to terminate high voltage polymeric (XLPE EPR) screened (copper wire or copper tape) cables to CENELEC Interface Type A (250amp) bushings with 7.9mm plug-in pins, 11kV-24kV.
Nexans Euromold 158LR/G and Nexans Euromold 158LR seperable connectors are approved for terminating 11kV/12kV polymeric (XLPE EPR) cables into gas insulated (SF6) switchgear, including ABB Safe Ring Ring Main Units (RMU's) and ABB Safe Plus Switchgear. Euromold 158LR/G connectors include earthing leads.
HV Elbows, Nexans Euromold Connectors HV - 158LR Connectors, 12kV 250Amp - 70...
HV Elbows, Nexans Euromold Connectors HV - 158LR Connectors, 12kV 250Amp - 70...Thorne & Derrick International
This document provides information on cable joints, terminations, and related equipment for voltages up to 24kV. It describes an Interface A elbow connector for connecting polymeric insulated cable to equipment. The connector has a conductive EPDM jacket for safety and is tested to withstand voltages and partial discharge. Kit contents and ordering instructions are provided.Zero Halogen Heat Shrink 120mm-40mm - W3 NH 120/40
This document provides information about medium and thick wall zero halogen adhesive lined heat shrink tube. It lists the product specifications, including sizes available from 3mm to 120mm diameter, shrink ratios of 3:1, and lengths up to 1.2 meters. The heat shrink tube is made of flexible, dual-wall, flame-retardant, non-halogen polyolefin material that reduces smoke and toxic gas emissions, making it suitable for applications in transportation and industrial areas. Part numbers, dimensions after recovery, and standard lengths are provided for the different tube sizes.
Nexans Euromold 430TB Screened Separable Connectors 400 Series, up to 630A 33...
Nexans Euromold 430TB Screened Separable Connectors 400 Series, up to 630A 33...Thorne & Derrick International
The document is a catalogue from Euromold, a manufacturer of medium voltage cable accessories. It provides information on Euromold's symmetrical separable connectors for Interface C, including the 400LB elbow connector, 400TB and 440TB tee connectors, and 440PB coupling connector. It describes the components, applications, standards, and ordering information for these connector products.Heat Shrink Joint Kit - 1.5-2.5sqmm 5Pair - SPA NHF 1.5-2.5-5PR
This document provides information on cable joints for multicore and multipair XLPE and EPR cables for voltages up to 600/1000V. It lists various part numbers for joints suited to cable ranges with 5 to 61 cores of 1.5-2.5mm2. It also describes low voltage zero halogen cable joints that are fire resistant, designed and tested in accordance with fire testing standards. These joints can be used for both single and multicore low smoke and fire resistant cable configurations.
Similar to Airfield Ground Lighting (AGL) Heat Shrink Cable Joint Kits (20)
SPS - LV MV Heat Shrink Cable Joints & Terminations (Full Catalogue)
SPS - LV MV Heat Shrink Cable Joints & Terminations (Full Catalogue)
Shrink Polymer Systems - Heat Shrink Cable Joints & Cable Terminations, Low ...
Shrink Polymer Systems - Heat Shrink Cable Joints & Cable Terminations, Low ...
SPS Low Voltage Zero Halogen Cable Joints For Limited Fire Hazard Cables - SP...
SPS Low Voltage Zero Halogen Cable Joints For Limited Fire Hazard Cables - SP...
SPS Heat Shrink Cable Joints & Terminations 11kV Triplex - Selection Guide
SPS Heat Shrink Cable Joints & Terminations 11kV Triplex - Selection Guide
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
SPS Heat Shrink Joints to Suit Low Voltage Cables 0.6/3.3kV
SPS Heat Shrink Joints to Suit Low Voltage Cables 0.6/3.3kV
Heat Shrink Joints to Suit Single Core Low Voltage Cables Type XLPE/SWA/PVC 0...
Heat Shrink Joints to Suit Single Core Low Voltage Cables Type XLPE/SWA/PVC 0...
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...
HV Elbows, Nexans Euromold Connectors HV - 158LR Connectors, 12kV 250Amp - 70...
HV Elbows, Nexans Euromold Connectors HV - 158LR Connectors, 12kV 250Amp - 70...
Zero Halogen Heat Shrink 120mm-40mm - W3 NH 120/40
Zero Halogen Heat Shrink 120mm-40mm - W3 NH 120/40
Nexans Euromold 430TB Screened Separable Connectors 400 Series, up to 630A 33...
Nexans Euromold 430TB Screened Separable Connectors 400 Series, up to 630A 33...
Heat Shrink Joint Kit - 1.5-2.5sqmm 5Pair - SPA NHF 1.5-2.5-5PR
Heat Shrink Joint Kit - 1.5-2.5sqmm 5Pair - SPA NHF 1.5-2.5-5PR
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Things to Consider When Choosing a Website Developer for your Website | FODUU
Choosing the right website developer is crucial for your business. This article covers essential factors to consider, including experience, portfolio, technical skills, communication, pricing, reputation & reviews, cost and budget considerations and post-launch support. Make an informed decision to ensure your website meets your business goals.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
CAKE: Sharing Slices of Confidential Data on Blockchain
Presented at the CAiSE 2024 Forum, Intelligent Information Systems, June 6th, Limassol, Cyprus.
Synopsis: Cooperative information systems typically involve various entities in a collaborative process within a distributed environment. Blockchain technology offers a mechanism for automating such processes, even when only partial trust exists among participants. The data stored on the blockchain is replicated across all nodes in the network, ensuring accessibility to all participants. While this aspect facilitates traceability, integrity, and persistence, it poses challenges for adopting public blockchains in enterprise settings due to confidentiality issues. In this paper, we present a software tool named Control Access via Key Encryption (CAKE), designed to ensure data confidentiality in scenarios involving public blockchains. After outlining its core components and functionalities, we showcase the application of CAKE in the context of a real-world cyber-security project within the logistics domain.
Paper: https://doi.org/10.1007/978-3-031-61000-4_16
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Recently uploaded (20)
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Things to Consider When Choosing a Website Developer for your Website | FODUU
Things to Consider When Choosing a Website Developer for your Website | FODUU
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
CAKE: Sharing Slices of Confidential Data on Blockchain
CAKE: Sharing Slices of Confidential Data on Blockchain
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Airfield Ground Lighting (AGL) Heat Shrink Cable Joint Kits
- 1. Unit E3, Crown Way, Crown Park Industrial Estate, Rushden, Northants, UK, NN10 6FD Tel: +44 (0)1933 356758 Fax: +44 (0)1933 413821 Email: info@shrinkpolymersystems.co.uk Skype: shrinkpolymersystems www.shrinkpolymersystems.co.uk 48 Airfield Lighting Heat Shrink Joint Kits • A full range of heat shrink joint kits for all airfield ground lighting cables • Approved for use on Defense Estates RAF Bases within the UK and all major BAA civilian Airports • Thousands of joints installed worldwide on both military and civil airfields Part Number Cable Type Connector Type SPS 1003 New Primary 6mm² Joint Non Insulated SPS 1003U Primary 6mm² to Itself or 8AWG Non Insulated SPS 036 Secondary 2 Core 2.5-6mm² Insulated SPS 1004 Primary Armoured 6mm² to Non Armoured 6mm² Non Insulated SPS 1005 Primary CU Braided 6mm² Armoured Non Insulated SPS 1005 Primary Brass Tape 6mm² Armoured Non Insulated SPS 1014 Primary 5kV Non Screened 6mm² Cable Non Insulated SPS 1015 Primary 5kV Screened 6mm² Cable Non Insulated Traffic Control Cable Heat Shrink Joint Kits • A comprehensive range of heat shrink joints traffic, motorway and communication cables • Approved by department of transport and traffic control systems unit london • Incorporates our unique black melt tape for superior internal moisture sealing Part Number To Suit Cable Type SPS 013 Loop to Armoured Feeder (1 Pair) SPS 021 Loop to Armoured Feeder (2 Pair) SPS 022 Loop to Armoured Feeder (3 Pair) SPS 023 Loop to Armoured Feeder (4 Pair) SPS 012 Loop to Non Armoured (1 Pair) Twin Flex SPS 018 4-8 Multicore SWA SPS 019 12, 16-20 Multicore SWA SPS 020 Feeder to Feeder 1-2 PAIR SWA SPS 017 Loop to Loop (10 PER PACK) SPS 031 3, 4 Pair to 2, 3, 4 Pair With 1 Pair Off SPS 047 7-8 Core Temporary Traffic Light Cable (Lux Type) SPS 148 2 Pair Telephone (Motorway) SPS 035 20-30 Pair Telecom (Motorway) SPS 162 30 Pair Uninterupt (Motorway) SPS 167 Split Concentric 10mm² (Motorway) SPS 168 Split Concentric 25mm² (Motorway) WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK