EcoSafe FR fluids represent an advancement in fire-resistant hydraulic fluid technology. They offer superior performance to mineral oils with benefits over other synthetic fluids. EcoSafe FR fluids are fully synthetic and provide excellent lubricity and wear protection. Unlike other synthetics, they do not break down in the presence of water and are more stable at high temperatures, extending maintenance intervals. EcoSafe FR fluids meet the needs of industrial and mobile hydraulic applications.
This product manual summarizes the key details of EnGuard GlassFree Insulation. It is made from a proprietary blend of recycled polyester fibers commonly found in clothing and other consumer products. It contains no formaldehyde, chemical binders, or fire retardants. EnGuard Insulation has a Class A fire rating and will not absorb moisture or degrade over time. It can be easily installed without special equipment and provides thermal and sound insulation for the lifetime of a home.
AMSOIL synthetic lubricants provide superior protection, longer service life, and maximum equipment life for farm equipment. Their synthetic formulations resist oxidation and heat damage better than conventional petroleum lubricants. This reduces wear and extends drain intervals, saving farmers time and money by reducing maintenance needs and downtime.
The document provides information on Permaseal plug valves, including their design, construction, pressure relief features, and variety of body designs, end connections, materials, and accessory options. Key details include their tapered plug and double seat seal design, pressure relief hole for flushing, external seat wear indicator, wiping action to prevent material buildup, top entry for easy maintenance, and low torque allowing smaller actuators. A variety of end connections, materials, and accessories are available to meet application needs.
Never-Seez® High Temperature Stainless is a
superior, high temperature anti-seize and extreme
pressure lubricant which protects up to 2200°F
(1204°C). It contains fine metallic and graphite
particles suspended in a specially formulated grease.
Recommended when applications prohibit the
presence of nickel, especially when resistance to
corrosive acidic and caustic solutions is required.
Molykote Products in India - Email sales@projectsalescorp.com Project Sales Corp
MOLYKOTE Supergliss is a corrosion protective lubricant composed of mineral oil, adhesion improver, solvent, and corrosion inhibitors. It penetrates rusty components to loosen corrosion and provides lubrication and corrosion protection. It has a density of 0.83 g/ml and viscosity of 3.6 mm2/s at 40°C. In salt spray tests it provides 8 hours of corrosion protection. It is applied by brush, oil can, or spray can and should be stored below 20°C for up to 60 months.
This document discusses lubrication of electric motor bearings. It emphasizes that lubricant is critical for electric motors to reliably operate at high speeds. It recommends following proper lubrication practices and staying informed of lubrication technology advances. The document then discusses regreasing procedures and highlights the benefits of a polyurea-based grease as a standard fill for electric motor bearings, including its high temperature resistance and oxidation stability.
1. There is a difference between vapor retarders, vapor barriers, and waterproofing materials and when each should be used under a concrete slab on grade.
2. Vapor retarders are used to slow the transmission of water vapor from the soil into the building through the slab, while vapor barriers completely block vapor transmission.
3. Proper installation of a vapor retarder under the slab is important to prevent moisture-related problems with flooring materials and to restrict soil gases from entering the building.
SSI Fine Bubble and Coarse Bubble DiffusersTomFrankel
Aeration systems introduction including fine bubble diffusers, coarse bubble diffusers, disc diffusers, tube diffusers,new technologies, and complete system photos.
This product manual summarizes the key details of EnGuard GlassFree Insulation. It is made from a proprietary blend of recycled polyester fibers commonly found in clothing and other consumer products. It contains no formaldehyde, chemical binders, or fire retardants. EnGuard Insulation has a Class A fire rating and will not absorb moisture or degrade over time. It can be easily installed without special equipment and provides thermal and sound insulation for the lifetime of a home.
AMSOIL synthetic lubricants provide superior protection, longer service life, and maximum equipment life for farm equipment. Their synthetic formulations resist oxidation and heat damage better than conventional petroleum lubricants. This reduces wear and extends drain intervals, saving farmers time and money by reducing maintenance needs and downtime.
The document provides information on Permaseal plug valves, including their design, construction, pressure relief features, and variety of body designs, end connections, materials, and accessory options. Key details include their tapered plug and double seat seal design, pressure relief hole for flushing, external seat wear indicator, wiping action to prevent material buildup, top entry for easy maintenance, and low torque allowing smaller actuators. A variety of end connections, materials, and accessories are available to meet application needs.
Never-Seez® High Temperature Stainless is a
superior, high temperature anti-seize and extreme
pressure lubricant which protects up to 2200°F
(1204°C). It contains fine metallic and graphite
particles suspended in a specially formulated grease.
Recommended when applications prohibit the
presence of nickel, especially when resistance to
corrosive acidic and caustic solutions is required.
Molykote Products in India - Email sales@projectsalescorp.com Project Sales Corp
MOLYKOTE Supergliss is a corrosion protective lubricant composed of mineral oil, adhesion improver, solvent, and corrosion inhibitors. It penetrates rusty components to loosen corrosion and provides lubrication and corrosion protection. It has a density of 0.83 g/ml and viscosity of 3.6 mm2/s at 40°C. In salt spray tests it provides 8 hours of corrosion protection. It is applied by brush, oil can, or spray can and should be stored below 20°C for up to 60 months.
This document discusses lubrication of electric motor bearings. It emphasizes that lubricant is critical for electric motors to reliably operate at high speeds. It recommends following proper lubrication practices and staying informed of lubrication technology advances. The document then discusses regreasing procedures and highlights the benefits of a polyurea-based grease as a standard fill for electric motor bearings, including its high temperature resistance and oxidation stability.
1. There is a difference between vapor retarders, vapor barriers, and waterproofing materials and when each should be used under a concrete slab on grade.
2. Vapor retarders are used to slow the transmission of water vapor from the soil into the building through the slab, while vapor barriers completely block vapor transmission.
3. Proper installation of a vapor retarder under the slab is important to prevent moisture-related problems with flooring materials and to restrict soil gases from entering the building.
SSI Fine Bubble and Coarse Bubble DiffusersTomFrankel
Aeration systems introduction including fine bubble diffusers, coarse bubble diffusers, disc diffusers, tube diffusers,new technologies, and complete system photos.
The document summarizes a presentation about wastewater aeration systems. It discusses the history of aeration, design and process considerations, types of aeration systems and their relative efficiencies, oxygen transfer testing methods, and quality control protocols. Case studies are presented showing energy savings from replacing old membrane diffusers with new fine bubble diffuser systems.
Barrier-Bac provides high quality vapor retarder products for use beneath concrete slabs. Their primary products are 11 mil VB-250 and 16 mil VB-350 vapor retarder membranes which exceed ASTM standards. They also offer a composite vapor retarder, VBC-350, made by laminating a 16 mil membrane to a polypropylene geotextile which provides excellent peel adhesion to concrete.
These synthetic gear oils from Molykote are designed for high demanding industrial applications like gears, offering excellent thermal and oxidative stability as well as protection against micro-pitting. They are available in various ISO viscosity grades from 100 to 680 for use in gear units requiring extreme pressure lubrication. The synthetic base oils and additives provide benefits like long equipment life, reduced costs, and a wide operating temperature range.
This document provides information on various Molykote lubricant products, including their uses and temperature ranges. It summarizes that Molykote lubricants contain molybdenum disulfide or silicone and are formulated to work better than ordinary lubricants in severe operating conditions. The document encourages using the right Molykote product for each operation to realize benefits like lower maintenance costs and less downtime.
The document discusses TOYO Riser Sea Grade pipes, which provide a corrosion-resistant solution for riser pipes in groundwater wells due to the corrosive effects of chemicals in the water on traditional steel and GI pipes. TOYO Riser Sea Grade uses a duplex system of an inner PVC pipe protected by an outer FRP (fiberglass reinforced plastic) pipe to prevent corrosion and extend the life of riser pipes. The document highlights the benefits of TOYO Riser Sea Grade such as moderate cost, maintenance-free operation, and a 10-year warranty.
15-questions-retrofilling-transformers-fr3-insulectGraeme Smith
This document provides information on retrofilling transformers with FR3 natural ester fluid. It begins with an introduction to the benefits of retrofilling transformers, such as extending useful life. It then presents the top 15 frequently asked questions about retrofilling with FR3 fluid. The questions cover topics such as fluid miscibility, insulation regeneration ability, fire safety classifications, cold weather performance, and material compatibility. For each question, the document provides a concise answer and sometimes references additional resources for more detailed information.
The document provides technical information about EasySeal/SilverSeal, a needle punched non-woven impregnated with water absorbing and swelling polymer. It is used to waterproof foundations, basements, tunnels and other structures. The material swells when contacting water, sealing cracks and ensuring waterproofing even if damaged. Test results from a German university found the material effectively stopped water penetration and was unaffected by various water types.
Huntsman produces lightweight epoxy and polyurethane materials for reinforcing aircraft composites before inserting fasteners. Their epoxy syntactic systems like Epocast 1618-D/B and 1633-A/B, and polyurethane adhesive Uralane 5774-A/B are used to pot inserts and meet requirements for flame retardancy. The materials provide high strength and can withstand temperatures up to 350°F, are qualified to major OEM specifications, and feature easy to use viscosities for the reinforcing process.
XIAMETER® ECE-3650 Sylgard HVIC is a one-part silicone coating designed to improve the performance of high voltage insulators and prevent flashovers caused by surface contamination. It forms a smooth hydrophobic coating that recovers its water repellency after contaminants deposit. This reduces maintenance needs and prevents damage from electrical activity in extreme weather. The coating also improves arc resistance and is suitable for use on insulators, bushings, and other high voltage devices.
Synthetic lubricants are engineered from pure chemicals rather than refined from crude oil. This allows them to withstand higher temperatures than conventional oils without breaking down. They also have uniform molecular structures that reduce friction and wear. Due to their designability, synthetic lubricants can be tailored for specific applications to maximize performance and equipment life.
This document provides information on automated flush bottom valves including applications, features, specifications, and drawings. Flush bottom valves are used in industrial vessels, fermentation reactors, food processing, and other applications to provide drainage and eliminate dead space and product buildup. They have features like high sterilization temperatures, unobstructed flow, and easy assembly/disassembly. Specifications include pressure ratings, end connections, and actuation types. Drawings show dimensions, components, and sizing for various valve models.
Araldite S-HCEP epoxy systems provide a cost-effective, semiflexible material for composite insulators with benefits like hydrophobicity, easy processing, and high tracking/erosion resistance. It offers material and processing cost savings compared to other options. The epoxy has intrinsic hydrophobic properties and can recover lost hydrophobicity. It can be processed using standard equipment without extra steps like premixing, vacuum prep, degassing, or postcuring. The epoxy adheres well without primers and provides excellent performance in high voltage insulation applications.
The document discusses corrosion protection coatings from SPI Performance Coatings. It describes their Rust Grip coating which provides corrosion protection with a single coat instead of traditional sandblasting and multiple coats. It stops corrosion development quickly and easily. The coating also provides thermal insulation and fire protection for building materials to save energy and maintenance costs.
The document summarizes different types of Spare Pak expansion joints:
1. Spare Pak Slip Joint - Provides no pressure drop and maximizes energy efficiency for linear pipe expansion. Maintains through graphite powder packing injection without shutdown. Life expectancy matches piping.
2. Spare Pak Ball Joint - Absorbs 3D movement through ball design. Decreases anchor force. Absorbs seismic and displacement. Maintenance through graphite powder injection without shutdown.
3. Spare Pak Multi Joint - Absorbs linear and 3D expansion through slip and ball design. Maximizes constructability and reduces expansion parts. Durable against water hammering. Maintenance through graphite powder injection without
This document discusses various quick maintenance sprays for trouble-free operations. It outlines different types of sprays for electrical cleaning, penetrating oils, assembly lubrication, corrosion protection, repair, lubrication, insulation, and special applications. For each category, popular brand names and products are mentioned, along with their key features and benefits. The document emphasizes choosing the right spray based on the intended application and desired characteristics.
MOLYKOTE 7348 is a high temperature silicone grease for rolling-element bearings. It has features such as low evaporation, high oxidation resistance, good long term lubrication, and water resistance. Typical properties include a light beige color, NLGI consistency class of 2, and service temperature range of -20 to +230°C. The grease can be used to lubricate bearings in driers, conveyor chains, and sterilizers.
PSX 700 is a weatherable epoxy-siloxane coating that is self-priming or can be used with a suitable epoxy primer. PSX 700 offers a combination of outstanding corrosion resistance, abrasion resistance, stain resistance and long-term gloss retention. Whether applied to structural steel, concrete floors or non-ferrous substrates, PSX 700 delivers longterm performance.
Never-Seez is an anti-seize compound developed by Bostik to protect metal parts from seizure, corrosion, and galling under extreme conditions. It contains fine metallic particles in a special carrier that forms a protective film resistant to heat, pressure, water, and abrasion. Never-Seez allows easy assembly and disassembly of parts while preventing damage. It has been the industrial standard for over 50 years, improving machinery performance and reducing costs from down-time and replacement parts.
1 testosterone levels in umbilical cord blood and risk of pyloric stenosispatricia brucellaria
This study examined the relationship between testosterone levels in umbilical cord blood and the risk of infantile hypertrophic pyloric stenosis. The researchers conducted a matched case-control study nested within the Danish National Birth Cohort. They found 46 cases of infantile hypertrophic pyloric stenosis in male infants and measured their umbilical cord blood testosterone levels, comparing them to 150 matched male controls. The study found no significant association between higher testosterone levels at birth and increased risk of infantile hypertrophic pyloric stenosis later in infancy.
This Old Portal -- Good Bones, Great PossibilitiesNIC Inc | EGOV
A white paper that explores the fundamental components of any eGovernment initiative -- including governance, executive championship, architecture, infrastructure, capacity planning, funding, application development, and design.
This document summarizes an presentation on industrial protocols for pentesters. It discusses several common industrial protocols including Modbus, Siemens S7, PROFINET, and provides information on analyzing them such as looking for patterns in hex dumps. Specific attacks are mentioned like extracting password hashes from TIA Portal project files or intercepting S7 authentication challenges and responses. Tools for scanning devices and manipulating protocols are also introduced. The presentation aims to help pentesters evaluate security of industrial control systems.
The document summarizes a presentation about wastewater aeration systems. It discusses the history of aeration, design and process considerations, types of aeration systems and their relative efficiencies, oxygen transfer testing methods, and quality control protocols. Case studies are presented showing energy savings from replacing old membrane diffusers with new fine bubble diffuser systems.
Barrier-Bac provides high quality vapor retarder products for use beneath concrete slabs. Their primary products are 11 mil VB-250 and 16 mil VB-350 vapor retarder membranes which exceed ASTM standards. They also offer a composite vapor retarder, VBC-350, made by laminating a 16 mil membrane to a polypropylene geotextile which provides excellent peel adhesion to concrete.
These synthetic gear oils from Molykote are designed for high demanding industrial applications like gears, offering excellent thermal and oxidative stability as well as protection against micro-pitting. They are available in various ISO viscosity grades from 100 to 680 for use in gear units requiring extreme pressure lubrication. The synthetic base oils and additives provide benefits like long equipment life, reduced costs, and a wide operating temperature range.
This document provides information on various Molykote lubricant products, including their uses and temperature ranges. It summarizes that Molykote lubricants contain molybdenum disulfide or silicone and are formulated to work better than ordinary lubricants in severe operating conditions. The document encourages using the right Molykote product for each operation to realize benefits like lower maintenance costs and less downtime.
The document discusses TOYO Riser Sea Grade pipes, which provide a corrosion-resistant solution for riser pipes in groundwater wells due to the corrosive effects of chemicals in the water on traditional steel and GI pipes. TOYO Riser Sea Grade uses a duplex system of an inner PVC pipe protected by an outer FRP (fiberglass reinforced plastic) pipe to prevent corrosion and extend the life of riser pipes. The document highlights the benefits of TOYO Riser Sea Grade such as moderate cost, maintenance-free operation, and a 10-year warranty.
15-questions-retrofilling-transformers-fr3-insulectGraeme Smith
This document provides information on retrofilling transformers with FR3 natural ester fluid. It begins with an introduction to the benefits of retrofilling transformers, such as extending useful life. It then presents the top 15 frequently asked questions about retrofilling with FR3 fluid. The questions cover topics such as fluid miscibility, insulation regeneration ability, fire safety classifications, cold weather performance, and material compatibility. For each question, the document provides a concise answer and sometimes references additional resources for more detailed information.
The document provides technical information about EasySeal/SilverSeal, a needle punched non-woven impregnated with water absorbing and swelling polymer. It is used to waterproof foundations, basements, tunnels and other structures. The material swells when contacting water, sealing cracks and ensuring waterproofing even if damaged. Test results from a German university found the material effectively stopped water penetration and was unaffected by various water types.
Huntsman produces lightweight epoxy and polyurethane materials for reinforcing aircraft composites before inserting fasteners. Their epoxy syntactic systems like Epocast 1618-D/B and 1633-A/B, and polyurethane adhesive Uralane 5774-A/B are used to pot inserts and meet requirements for flame retardancy. The materials provide high strength and can withstand temperatures up to 350°F, are qualified to major OEM specifications, and feature easy to use viscosities for the reinforcing process.
XIAMETER® ECE-3650 Sylgard HVIC is a one-part silicone coating designed to improve the performance of high voltage insulators and prevent flashovers caused by surface contamination. It forms a smooth hydrophobic coating that recovers its water repellency after contaminants deposit. This reduces maintenance needs and prevents damage from electrical activity in extreme weather. The coating also improves arc resistance and is suitable for use on insulators, bushings, and other high voltage devices.
Synthetic lubricants are engineered from pure chemicals rather than refined from crude oil. This allows them to withstand higher temperatures than conventional oils without breaking down. They also have uniform molecular structures that reduce friction and wear. Due to their designability, synthetic lubricants can be tailored for specific applications to maximize performance and equipment life.
This document provides information on automated flush bottom valves including applications, features, specifications, and drawings. Flush bottom valves are used in industrial vessels, fermentation reactors, food processing, and other applications to provide drainage and eliminate dead space and product buildup. They have features like high sterilization temperatures, unobstructed flow, and easy assembly/disassembly. Specifications include pressure ratings, end connections, and actuation types. Drawings show dimensions, components, and sizing for various valve models.
Araldite S-HCEP epoxy systems provide a cost-effective, semiflexible material for composite insulators with benefits like hydrophobicity, easy processing, and high tracking/erosion resistance. It offers material and processing cost savings compared to other options. The epoxy has intrinsic hydrophobic properties and can recover lost hydrophobicity. It can be processed using standard equipment without extra steps like premixing, vacuum prep, degassing, or postcuring. The epoxy adheres well without primers and provides excellent performance in high voltage insulation applications.
The document discusses corrosion protection coatings from SPI Performance Coatings. It describes their Rust Grip coating which provides corrosion protection with a single coat instead of traditional sandblasting and multiple coats. It stops corrosion development quickly and easily. The coating also provides thermal insulation and fire protection for building materials to save energy and maintenance costs.
The document summarizes different types of Spare Pak expansion joints:
1. Spare Pak Slip Joint - Provides no pressure drop and maximizes energy efficiency for linear pipe expansion. Maintains through graphite powder packing injection without shutdown. Life expectancy matches piping.
2. Spare Pak Ball Joint - Absorbs 3D movement through ball design. Decreases anchor force. Absorbs seismic and displacement. Maintenance through graphite powder injection without shutdown.
3. Spare Pak Multi Joint - Absorbs linear and 3D expansion through slip and ball design. Maximizes constructability and reduces expansion parts. Durable against water hammering. Maintenance through graphite powder injection without
This document discusses various quick maintenance sprays for trouble-free operations. It outlines different types of sprays for electrical cleaning, penetrating oils, assembly lubrication, corrosion protection, repair, lubrication, insulation, and special applications. For each category, popular brand names and products are mentioned, along with their key features and benefits. The document emphasizes choosing the right spray based on the intended application and desired characteristics.
MOLYKOTE 7348 is a high temperature silicone grease for rolling-element bearings. It has features such as low evaporation, high oxidation resistance, good long term lubrication, and water resistance. Typical properties include a light beige color, NLGI consistency class of 2, and service temperature range of -20 to +230°C. The grease can be used to lubricate bearings in driers, conveyor chains, and sterilizers.
PSX 700 is a weatherable epoxy-siloxane coating that is self-priming or can be used with a suitable epoxy primer. PSX 700 offers a combination of outstanding corrosion resistance, abrasion resistance, stain resistance and long-term gloss retention. Whether applied to structural steel, concrete floors or non-ferrous substrates, PSX 700 delivers longterm performance.
Never-Seez is an anti-seize compound developed by Bostik to protect metal parts from seizure, corrosion, and galling under extreme conditions. It contains fine metallic particles in a special carrier that forms a protective film resistant to heat, pressure, water, and abrasion. Never-Seez allows easy assembly and disassembly of parts while preventing damage. It has been the industrial standard for over 50 years, improving machinery performance and reducing costs from down-time and replacement parts.
1 testosterone levels in umbilical cord blood and risk of pyloric stenosispatricia brucellaria
This study examined the relationship between testosterone levels in umbilical cord blood and the risk of infantile hypertrophic pyloric stenosis. The researchers conducted a matched case-control study nested within the Danish National Birth Cohort. They found 46 cases of infantile hypertrophic pyloric stenosis in male infants and measured their umbilical cord blood testosterone levels, comparing them to 150 matched male controls. The study found no significant association between higher testosterone levels at birth and increased risk of infantile hypertrophic pyloric stenosis later in infancy.
This Old Portal -- Good Bones, Great PossibilitiesNIC Inc | EGOV
A white paper that explores the fundamental components of any eGovernment initiative -- including governance, executive championship, architecture, infrastructure, capacity planning, funding, application development, and design.
This document summarizes an presentation on industrial protocols for pentesters. It discusses several common industrial protocols including Modbus, Siemens S7, PROFINET, and provides information on analyzing them such as looking for patterns in hex dumps. Specific attacks are mentioned like extracting password hashes from TIA Portal project files or intercepting S7 authentication challenges and responses. Tools for scanning devices and manipulating protocols are also introduced. The presentation aims to help pentesters evaluate security of industrial control systems.
How to Deposit my Poster or Presentation?
Open Access Poster Portal
An CMB UMCG project: an UMCG institutional portal
Check: http://www.rug.nl/bibliotheek/locaties/bibcmb/instructies_auteurs/posters/index
SCADA deep inside: protocols and security mechanismsAleksandr Timorin
The document discusses various industrial control system protocols including Modbus, DNP3, PROFINET DCP, IEC 61850-8-1, and IEC 61870-5-101/104. It describes their functions, security issues like lack of authentication and encryption, and available tools for analyzing the protocols. The speaker is a penetration tester who researches SCADA security and protocols.
This document provides information on Cool Solv SRWT-1121, an antiscalant produced by Dorf Ketal Chemicals. It is a concentrated liquid formulation used to inhibit scale in reverse osmosis and thermal desalination systems. It works through crystal distortion and sequestration to prevent deposits of calcium, barium, and strontium salts. Cool Solv SRWT-1121 is soluble, effective at high pH, and compatible with membranes. It has applications in RO and thermal desalination plants to control deposits and extend membrane life. The recommended dosage is generally 3 to 15 ppm depending on the system.
This document discusses the polymer polysulfone. It provides an introduction to polysulfone, describing its synthesis via polysulfonylation and polyetherification reactions. It discusses the production of major commercial polysulfones by Union Carbide, ICI, and 3M. The properties of polysulfone are summarized, including its high heat resistance, toughness, and chemical resistance. Applications are in electrical components, medical devices, automotive parts, and more due to these desirable properties. The advantages and few limitations of polysulfone are also outlined.
Viton (FKM or FPM) is suitable for applications involving mineral acids, salt solutions, and chlorinated hydrocarbons with a temperature range of -20°F to +300°F. Buna-N (Hycar or Nitrile) has good resistance to oil, water, solvents and hydraulic fluids with a maximum temperature of +225°F. Hypalon has good resistance to oxidation, ozone and flame with improved acid resistance compared to neoprene and a temperature range of 0°F to +220°F. Neoprene is recommended for pulp and paper applications with a temperature range of -20°F to +180°F.
This document discusses the maintenance of hydraulic oils, focusing on phosphate ester-based fluids. It describes the types of hydraulic fluids, including petroleum-based, synthetic fire-resistant, and water-based. Contamination sources like solids, liquids, and air are outlined. The document advocates for using best available technology and continuous purification to control fluid quality and extend fluid life to over 10 years while minimizing waste and costs. Vacuum distillation is presented as a best available technology for purification. Frequent sampling, analysis of key parameters, and filtration are recommended for maintenance.
This technical bulletin summarizes Huntsman's products for enhanced oil recovery (EOR) using ultra-low interfacial tension. It describes how selecting surfactants to reduce interfacial tension allows oil to move through rock pores. It provides details on Huntsman's primary surfactants including alkylaryl sulfonates and extended chain surfactants, as well as co-surfactants and co-solvents used to optimize EOR formulations for different reservoirs. It also discusses developing surfactants for carbon dioxide-based EOR.
Venture Chemicals develops and supplies specialty chemicals including organo-lignites derived from lignite and humic acids. These colloidal organo-humates are useful as fluid loss additives in oil-based drilling fluids to control fluid loss at temperatures over 500°F. Venture Chemicals offers multiple organo-humate products tailored for different temperature ranges and applications, with testing recommended to select the optimal product.
Project Sales Corp., India is the exclusive distributors for Lubchem Products in India
PSC is one of India’s largest independent distributors of specialty lubricants for applications below and above the water line. We stock and sell a whole range of specialty lubricants designed specifically for marine and offshore drilling markets. All formulated to work better.
Know more at www.pscspecialtylubricants.com
Ven-Chem Presentation (Our Line of Amine Treated Lignites)veVenture Chemicals
Venture Chemicals develops additives for drilling fluids, water treatment, and other industrial applications using renewable materials. Their organo-lignite additives provide thermal stability up to 500°F, control fluid loss, minimize formation damage, and are environmentally friendly. Venture Chemicals produces different grades of organo-humate additives for use in oil-based drilling fluids at various temperature ranges from below 300°F up to over 500°F. Testing is recommended to select the best performing and cost-effective product for each application.
This paper discusses the development of a new quebracho-based fluid loss control agent for use in synthetic-based invert emulsion drilling fluids. The agent is stable up to 400°F and provides improved fluid loss control and filter cake properties compared to traditional additives like Gilsonite and amine-treated lignite. Laboratory testing and field applications showed the new agent effectively controlled fluid losses while being environmentally acceptable for use in areas with strict regulations.
Helamin is an all-in-one water treatment product that protects against corrosion and scale in boilers and related systems. It forms a protective film on metal surfaces, disperses scale-forming salts, and controls pH. Helamin treats the entire water-steam circuit with a single product, reducing costs and simplifying treatment compared to traditional methods. It is non-toxic, minimizes blowdown and effluent, and provides effective corrosion protection for boilers operating up to 600°C and 220 bar pressure.
Know more about our leading-edge Organic Chemistry based on the best of the French Filming Amines to treat Cooling Towers, Steam Boilers and Closed Loop Systems.
Products are available through our partners in Europe, USA, Canada and Mexico.
Envirochem Systems provides water treatment and cleaning solutions. It has over 30 years of experience in reverse osmosis additives, boiler treatment, cooling tower chemicals, descaling chemicals, and more. The document outlines Envirochem's product lines and describes several products in detail, highlighting their benefits such as preventing scale, corrosion, and biological growth.
Fiberglass is a preferred manufacturing material due to its superior performance in many industries. Fiberglass is made by embedding glass fibers in a cured thermosetting resin, called fiberglass reinforced plastic. The mechanical strength of fiberglass depends on the amount, type, and arrangement of glass fiber reinforcement. Different thermosetting resin systems can be used, including orthothalic, isothalic, and vinyl ester resins, with vinyl ester providing the highest chemical resistance important for industrial applications. Vinyl ester resin eliminates moisture vapor transfer better than other resins, making it an excellent barrier for containing corrosive fluids. Fiberglass has proven to be an excellent material for storage tanks due to its performance
Partnering With ArmorThane For Lining Projectsct1054
This document discusses ArmorThane, a manufacturer of polyurethane and polyurea coatings and application equipment. It outlines various products they offer to coat and protect a variety of surfaces from elements like weather, corrosion, chemicals and more. Applications mentioned include secondary containment, primary containment, wastewater treatment, roof waterproofing, and coating of surfaces like metal, concrete, asphalt and more. Photos show before and after examples of containment pits and roofs coated with ArmorThane products.
This document provides information on waterborne epoxy coating systems from Huntsman Advanced Materials. It discusses:
1. Huntsman's waterborne epoxy resins and hardeners that can be used for various coating applications on cementitious or metal substrates.
2. Key selection factors for the appropriate resin and hardener combination based on the targeted application and substrate.
3. Examples of basic formulations for a waterborne clear epoxy sealer and waterborne low VOC floor coating.
This document provides information on Blue Barrel Supply B.V., a distributor of valve lubricants, sealants, and packings manufactured by Desco and ThredOn. It lists over 50 lubricant and sealing products along with their description, temperature range, and other details. Blue Barrel Supply supplies efficient and cost-effective maintenance products for various industries including oil and gas exploration, pipelines, refining, and chemicals. The document also provides information on product packaging options including small and large stick lubricants available in various standard sizes.
Deceth series HLB value for hard surface cleaner applications.pdflzhao5
This document provides information on Indorama Ventures' range of nonionic surfactant products. It describes the chemistry of nonionic surfactants, which are produced through the reaction of alkylene oxides like ethylene oxide with alcohols, alkylphenols, or fatty acids. It lists their nonionic surfactants range, including alcohol ethoxylates, alkylphenol ethoxylates, block copolymer surfactants, and oleo surfactants. It also provides product data sheets, applications, INCI names, and handling guidelines for their nonionic surfactant products.
This document summarizes the benefits and performance of Huntsman's Araldite® HCEP Systems, a line of hydrophobic epoxy materials designed for extreme outdoor conditions. The materials offer extended hydrophobic properties, low leakage currents, superior thermal cycle resistance, enhanced flame retardancy, and excellent tracking and erosion resistance. Field tests show the materials exceed requirements for outdoor applications worldwide and maintain hydrophobicity even after years of exposure to harsh weather.
Drop is any object that falls from its previous static position under its own weight. Dropped Objects are among the Top 10 causes of Fatality and Serious Injury in the Oil and Gas Industry. Our focus would be on products and systems that can be integrated into the customer’s safety management systems to identify potential dropped object hazards, prevent their occurrence, and mitigate their outcome. We would share information on a broad array of tools, products and deliverables, including inspection programmes, awareness videos and presentations, safety checklists, guidelines, procedures and best practices as a part of building up awareness on DROPS and also offer our customers to buy these special dropped object prevention products and services from one source.
Concept is simple - if we can keep our hands at a distance while doing tasks like guiding, positioning, pushing, pulling slung loads or doing anything to bring it to its final place – we avoid a “caught between” kind of situation and protect our hands.
The Marketing Services Unit of PSC Dubai in Silicon Oasis DDP is responsible for business development and trading of our key brands in the Industries worldwide. The portfolio includes oilfield equipments, bar and rod mill spares (pinch rolls, guide rollers, HSS rolls, etc) and PSC Hands-Free Safety Tools.
Description:
International sourcing company based in Dubai Free Zone.
Focus:
Specializes in equipment, spare parts, and consumables
procurement.
Backed By:
Supported by Project Sales Corp, a leading rig parts supplier in
India.
Offerings:
Supplies PPE, workplace safety gear, and oilfield lubricants.
Mission:
Importing products needed by drilling rig operators in India.
Competitive Pricing:
Quotes competitive prices for imported goods.
Location Advantage:
Located in a Free Trade Zone, exempt from VAT and Customs.
With over thousands of products in its stocking range, Project Sales Corp is undoubtedly India’s largest oilfield ropes, soaps, dopes store. We call it the Rig Essentials Line.
Take a look inside to see some of the key products that we stock in this category of MRO, Tools, Safety and Rig Essentials. Whether you are a rig operator or an oilfield supplier, you will find consolidating your purchases with us for the items we stock would be the right way to service your end-users requirement the quickest way!
How We Work
Imagine using a $200 a pail dope and using a $1 dope brush, the savings you have with the brush costs, you don’t realise the loss you incur with the dope as a faulty brush creates pilferage of materials, improper application of dopes and overall a total higher costs than the savings you made buying the cheap dope brush.
Keeping this logic in mind that a cheap substitute ultimately costs more in total costs, Project Sales Corp has built up a portfolio of proven good quality high performance products from India and worldwide used on-board drilling rigs. They improve reliability, reduce overall costs, downtime and provide user a peace of mind with daily essentials on the rig.
We don’t stock the quality that generally sells in the local markets, we bring in products that have proven themselves in being able to make a positive difference. That’s sums up our strategy to this core product category – The rig essentials line of Ropes, Soaps, Dopes that has contributed over $25 million of revenues in last 10 years.
The daily materials used on a rig are colloquially referred to as Rope, Soap, and Dope.
➢ Rope referred to chains and ropes used to hoist materials up to derricks and platforms
➢ Soap was used in reference to products and tools used to clean machinery, tools, the rig, and the workers themselves
➢ Dope meant the lubricants, grease, and fuel - the essential liquids that were employed to keep machinery and the rig up and running.
Our workplace safety range comprises of products that can mitigate various kinds of risks in workplace or improve safety facility identification to assist workers with working in a safer environment. Key products include Slips Trips and Falls protection with Anti-skid tapes, Barricading Tapes, Lane Marking Tapes, 5S Program, Utility Hooks for Cables and Hoses, Facility signages, Traffic control products, and more. We also stock scaffolding and ladder tags, small instrument tagging systems like Microtags and Nanotags, Confined Space Entry Kits, etc. PSC Whipchecks are used as hose restraints to prevent hoses from whipping. The Nightstick range of intrinsic safety flashlights range with world’s first dual light improves safety with visibility for near and far objects, at the same time. Safepads improve safety while working with scaffold and all kinds of protruding objects.
PSC Houston Oilfield Supplies LLC aims to supply OEM parts to drilling rigs worldwide. With over two decades of experience in the drilling spares business in India and Dubai, over 450 suppliers worldwide, of which over 200 are based out of Houston alone, we are the supplier that’s closest to the source for these parts in the United States.
Based out of Houston, PSC Houston Oilfield Supplies LLC can quickly ship out parts to the rigs thus reducing downtime. There is nothing in specific we stock, and there is no limit to what we can source, you just need to let us know. We can reach out to our extensive vendor base and find out the source with the quickest delivery.
With trained international sourcing teams supporting from India, Dubai and Houston, you can expect to get the fastest response to your requirements. Our India unit Project Sales Corp (PSC) stocks over a 1000 sku’s of stuff that goes out to the oilfield and services all the drilling contractors, EPC companies in offshore and oilfield services companies. PSC Gulf supplies parts to some of the leading operators in the Middle East. The PSC Houston office works closely with the OEMs to get you the most competitive pricing and the shortest lead time for critical parts.
With a team of 40 people spread across our offices, all focussed on one thing – drilling rig parts- we are just an email or call away.
With over two decades of experience in the drilling spares business in India and Dubai, over 450 suppliers worldwide, of which over 200 are based out of Houston alone, we are the supplier that’s closest to the source for these parts in the United States.
With offices in India, Dubai and US, we can deliver rig spares worldwide.
Lubrication accounts for a small part of the overall maintenance budgets and the right lubricant goes a long way to reduce downtime, improve reliability and enhance equipment life.
Leading bearing manufacturers have conducted studies to find out the reasons for premature bearing failure. More than one-third of bearing failures is due to imperfect lubrication. In many more cases, which cannot be traced directly to imperfect lubrication, it’s still the underlying cause.
Project Sales Corp is pleased to introduce its Sealing Compounds range. We represent one of the most exhaustive range of Sealing Compounds from around the world that finds application in sealing steam and gas turbines, compressors, pumps, gearboxes, flanges and more.
An ideal flanged joint would consist of two, mirror-finish, perfectly flat and parallel surfaces bolted directly together to create a leak-free seal. However, manufacturing processes do not allow for perfect sealing surfaces. Most flange faces have surface irregularities that cannot be sealed without the use of some type of compressible, resilient material or a combination of materials between them to seal the fluid being transferred. This is true even for the most finely machined surfaces as a turbine flange where the surface asperities can create a leak situation.
Slung loads are dangerous. Going close to it exposes one to various injuries, pinch, crush and foot and body injuries. There is tension in the load until it rests in the final position. There are obvious chances of injuring the fingers and hands and getting too close to the red zone where a suspended dropped object could fall on the foot or body. You also expose yourself to lacerations and abrasion when the object you are trying to guide is sharp or rough.
PSC introduces the PSC Guide-it SlingGrab, a simple to use load positioning tool to manage slung loads by using the special head designed for chains and wire rope slings, webbing slings, to grab and manoeuvre the slung loads while it moves to its final position. Concept is simple - if we can keep our hands at a distance while doing tasks like guiding, positioning, pushing, pulling slung loads or doing anything to bring it to its final place – we avoid a “caught between” kind of situation and protect our hands.
Available in 4 lengths and competitively priced, you can now make it a rule, no grabbing slings by hand, always use a PSC Guide-it SlingGrab. Please see attached for more details.
www.pschandsafety.com
www.pschandsfree.com
GasGrab - Project Report on Cylinder Lifting and Benefits with GasGrabProject Sales Corp
In 2007 Bradford University carried out a study of the GasGrab™. The 34 page report that came from this study includes a large amount of technical data that highlights the health and saftey benefits of using GasGrab™ when lifting gas cyclinders.
Click here to download and view the report.
Gasgrab™ is a property of Arrow (Newbury) Ltd and is marketed in India by Project Sales Corp www.pschandsfree.com
The document lists 25 motors that are currently in stock, including their manufacturer, specifications, and quantity available. The motors range in horsepower from 1/2 HP to 5 HP, have speeds from 1100 RPM to 3450 RPM, and voltages from 115/230V to 460V. Manufacturers include Emerson, GE, Reliance Electric, Baldor, Marathon, and Lincoln.
The document is a list of 57 different gasket part numbers, materials, and quantities. It includes information such as part number (ex: RX54), material (ex: API.6A Low Carbon Steel), and quantity of each part number (ex: 13 R*). The gaskets are made from various materials like low carbon steel, soft iron, 304SS, 309SS, and 316SS.
This document provides information on man-made mineral fibre filter masks produced by FlameSkill Ltd, including the company's address and contact information, materials used in the masks, certifications held, product number, pricing, and place of origin for orders. The masks meet European safety standards and use polypropylene and other plastics for the facepiece, straps, and filters, as well as natural rubber for valves.
- PSC is a hand safety specialist company in India that stocks over two dozen variants of impact protection and non-impact gloves for tasks in industries like oil and gas.
- The document provides details on various glove models from brands like Ironclad and Kong, describing their features like impact protection, cut resistance, grip, and dexterity suited for different industrial tasks.
- Glove options mentioned include utility gloves, mechanics gloves, impact protection gloves, anti-vibration gloves, cut resistant gloves, and deck crew gloves.
PSC is India’s largest manufacturer & exporter of Hands-Free and Hands-Off Safety Tools that enables you to carry out tasks in the oilfield without getting your hands close to the pinch and crush points. PSC hands-free safety tools can help to reduce hand and finger injuries by facilitating safe movement of the load by controlling the load from a distance, without physically touching the load. The product range includes Push/Pull Poles, Anti-Tangle Taglines, Hose Lifters, Lift Assist Pipe Lifting Aids, Slogging Spanner Holders, etc. In 2020-2021 it has exported products to USA, Canada, Africa, Mid-East, South East Asia.
PSC is India’s largest manufacturer & exporter of Hands-Free and Hands-Off Safety Tools that enables you to carry out tasks in the oilfield without getting your hands close to the pinch and crush points. PSC hands-free safety tools can help to reduce hand and finger injuries by facilitating safe movement of the load by controlling the load from a distance, without physically touching the load. The product range includes Push/Pull Poles, Anti-Tangle Taglines, Hose Lifters, Lift Assist Pipe Lifting Aids, Slogging Spanner Holders, etc. In 2020-2021 it has exported products to USA, Canada, Africa, Mid-East, South East Asia.
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
1. EcoSafe FR
Fire Resistant and Readily Biodegradable Hydraulic Fluids
®
Formulated for Use in High Performance Hydraulic and Hydrostatic Drive Systems
2. A Breakthrough in Performance and Protection Performance Advantages:
for High Performance Hydraulic Systems
Excellent Lubricity – EcoSafe® FR fluids offer excellent lubricity, for
EcoSafe FR fluids represent a significant advancement in fire-resistant
®
outstanding pump life under the most severe conditions. The fluids meet or
hydraulic fluid technology. These fully synthetic formulations deliver exceed the pump performance of premium, anti-wear mineral oils even at
performance superior to premium anti-wear mineral oils, and with 5,500 psi (380 bar) operating pressure. Shear stability is excellent. And all
significant performance and environmental advantages over other fluid three grades earn a 12-stage rating in the FZG Gear Test, demonstrating
options – including other synthetics. EcoSafe FR fluids are used in high level protection against wear and scuffing.
industrial, and mobile equipment, including high-pressure systems,
Hydrolytic Stability – Unlike phosphate esters, polyol esters and
hydrostatic drives, systems with servo valves, and all robotics.
vegetable oils, EcoSafe® FR fluids will not break down and react with water,
EcoSafe® FR fluids are based on a very high VI, polyether polyol base minimizing fluid degradation and acid formation that can damage and
stock combined with a non-metallic additive package. Unlike eventually destroy hydraulic pumps.
phosphate and polyol ester-based fluids, they do not break down when
Non-Sludge or Varnish Forming – The fluids are oxidatively stable and
exposed to water, minimizing potential for fluid degradation and system
will not degrade to form varnish or sludge, contributing to long-term system
damage. As a result, fluid changeout intervals are extended under even
cleanliness while extending maintenance intervals and overall service life.
the most severe operating conditions.
High Temperature Stability – EcoSafe® FR fluids are very stable at high
EcoSafe® FR fluids are classified as FM Approved industrial fluids by
temperatures and resistant to thermal degradation up to 120°C (250°F).
Factory Mutual and meet stringent criteria for biodegradability and
low toxicity. All-Weather Service – The high viscosity indices of EcoSafe® FR fluids
enable them to handle wide temperature extremes. The fluids also have low
pour points necessary for cold weather start up.
Material Compatibility – EcoSafe® FR fluids are completely compatible
with commonly used seals, hoses and metals. Detailed compatibility data is
available upon request.
Detergency – EcoSafe® FR fluids are natural detergents, so systems
remain clean…free of staining or sticky residue.
Fire Resistance – EcoSafe® FR Fluids are classified as FM Approved
industrial fluids by Factory Mutual.
Biodegradable/Low Toxicity – EcoSafe® FR fluids are classified as
“readily biodegradable” and environmental impact is low if the products are
spilled. EcoSafe® FR fluids also satisfy stringent criteria for toxicity.
EcoSafe® FR fluids meet or surpass Bosch-Rexroth,
Sauer-Danfoss, Denison, Parker, Oilgear, and Eaton (formerly
Vickers) specifications.
Unmatched by Other Fluids
EcoSafe® FR fluids do not have the drawbacks of other synthetic fluids, • Phosphate esters also hydrolyze in the presence of water. This reaction
mineral oils and vegetable oils… accelerates with increasing temperatures and is catalyzed by the
presence of strong acids. Since this hydrolysis forms strong acids the
• Polyol esters (including vegetable oils, which are naturally occurring
reaction is said to be autocatalytic. Metals such as copper, some copper
polyol esters) hydrolyze in the presence of water to form acid. Fluids
alloys, and lead act as pro-oxidation catalysts which will also accelerate
with increased acidity attack hose linings and o-rings, and leach the
this reaction. Phosphate ester fluids represent a human health hazard
alloy from brass components, resulting in premature component failure.
because a major decomposition by-product is highly toxic.
Polyol esters also contain some degree of unsaturation, which reduces
their thermal and oxidative stability. The end result is the formation of
sludge and varnish from insoluble degradation byproducts.
3. Typical Performance Properties*
Rexroth 1,100 Hour Endurance Test (2600 rpm, 85°C [185°F], 380 bar) Pass
Fluids Denison HF-0 Approval to 71°C (160°F)
Vickers 104C Vane Pump Test, ASTM D2882
Pass
(2000 psi, 1200 rpm, 100 hours, 65°C (150°F), 7.5 gpm, 3.5 gallon sample) <5mg total wear
Four Ball Wear, ASTM D2266 (1800 rpm, 1 hour, 75°C (167°F), 40 kg load) 0.35 mm
Four Square Gear Test (FZG) (1760 rpm, 90°C [194°F], 1600 ml sample) Pass, all 12 stages
Eaton Corporation 35VQ25 (formerly Vickers)
Industrial (I-286-S), Mobile (M-2950-S) Pass
Turbine Oil Stability Test, ASTM D943
(95°C [203°F], iron and copper catalysts, 60 mls water) Time to 2.0 Acid Number Increase >2,000 hours
Seal Compatibility
(1,000 hours @ 100°C [212°F])
Buna-n, Viton, Polyurethane, EPR, Butyl, PTFE Pass
OECD Ready Biodegradability
Test Method 301 B, 28 days, Requirement: >60% 70.9%
*Typical properties, not to be construed as specifications.
Typical Physical Properties*
EcoSafe® FR-46 EcoSafe® FR-68 EcoSafe® FR-100
Viscosity @ 100°F, SUS (cSt @ 40°C) 250 (48.9) 320 (63.3) 480 (94.8)
Viscosity @ 210°F, SUS (cSt @ 100°C) 57.5 (9.35) 66.6 (11.8) 86.6 (16.8)
Viscosity Index 178 185 192
Pour Point, °C (°F) -48 (-55) -45 (-50) -40 (-40)
Density (lbs/gal) @ 60°C (140°F) 8.19 8.21 8.25
FM Approved Yes Yes Yes
*Typical properties, not to be construed as specifications.
Kinematic Viscosity Comparison
1000
PAO PAG
100
Viscosity (cSt)
Superior Oxidative Stability
Results of controlled fluid tests show 10
the superior stability of PAG-based
fluids such as EcoSafe® FR fluids
compared to PAOs (synthetic
hydrocarbons). After 2500 hours at
120°C, the PAO produced significant
deposits, which could result in
operational problems in hydraulic 1
systems. In contrast, the vial -10 10 30 50 70 90 110 130
containing the PAG-based fluid was Temperature (°C)
virtually free of deposits.
EcoSafe® FR-46, VI - 178 Petroleum AW, VI - 98 PAO AW, VI - 154
4. EcoSafe FR ®
Hydraulic Fluids
A Global Source for Premium Fluids and Lubricants
American Chemical Technologies, Inc. (ACT) provides premium
industrial lubricants and metalworking fluids to a wide range of
industries. Founded more than 30 years ago in the U.S., ACT has grown
to become an international supplier of highly specialized products for
industry and markets through a global network. Our commitment to
advanced technology and personal service continues today as we set
new standards for product performance and customer satisfaction.
Call on Us for Total Support
We want your experience with our products to be successful. ACT
supports its products with a full range of sales, technical, and customer
service support, including information and/or assistance to help you
with product selection, handling, maintenance, and disposal. Our
Check-Mate hydraulic fluid monitoring program is designed to
enable users to maintain fluid quality while monitoring the condition
of all system components. Call ACT today for expert fluids and
lubricants support.
To Learn More Call: 1-800-938-0101
Outside of the U.S. and Canada, please call 1-517-223-0300 (USA)
American Chemical Technologies Ask About the Full Line of Fluids and Lubricants from ACT
485 E. Van Riper Road • EcoSafe® FR Fire Resistant Hydraulic Fluids
Fowlerville. MI 48836 • EcoSafe® EHC Hydraulic Fluids for the Power Generation Industry
Tele: 517-223-0300 • EcoSafe® NCLR Hydraulic Fluids for Nuclear Power Stations
Fax: 517-223-1703 • UCON™ Trident™ Water Soluble Anhydrous Hydraulic Fluids
www.americanchemtech.com • Neptune® Gear Oils
• EcoGear® Gear Oils
Trademark of American Chemical Technologies.
® ™
Trademark of The Dow Chemical Company or an affiliated company of Dow.