This document discusses how lean thinking can positively influence occupational safety and health in manufacturing industries. It notes that developing countries are focusing on industrial development and technology transfer but often neglect workplace safety, resulting in lost productivity and costs. The study reviews literature on lean's impact on safety and health hazards to reduce non-value adding activities. Data from Ethiopia shows manufacturing there has high accident rates with little focus on safety issues. Implementing lean occupational safety and health techniques can help control risks and reduce wastes from absent workers, compensation, and damaged equipment. More research is still needed on integrating lean with safety improvements, as awareness of its impacts on productivity remains low in developing nations.
This document provides information about a study on AB Bank Limited in Bangladesh, including a discussion of corporate social responsibility and the banking sector in Bangladesh. The document contains information on the journal it was published in, including publication details.
This document provides a summary of three articles published in the Global Journal of Science Frontier Research: Chemistry. The articles discuss the synthesis and biological activities of chromium soaps, analysis of chromium using atomic absorption, and nanocomposite materials based on digestion. The document also lists publication details such as volume number, issue number, and publisher information.
This document provides information on a publication by the International Atomic Energy Agency (IAEA) regarding the operation and maintenance of gas and liquid targets for producing radionuclides using cyclotrons. It discusses two categories of IAEA publications - one presenting guidance and methodologies, and one complementing information in the first category. It also provides details on the objectives of the IAEA's radioisotope program, the intended readership of the publications, and how to access and provide feedback on the publications.
2016 book published road accidents and safety from addis ababa to hawassaKassu Jilcha (PhD)
This document provides acknowledgements and thanks from the author for those who assisted with his dissertation. It thanks his advisors, Dr. Daniel Kitaw and Mr. Gulelat Gatew, for their guidance and support throughout the dissertation process. It also thanks Ato Abebe Asrat from the Ethiopian Transport Authority, various police commissions, and the Ethiopian Road Authority for providing data and comments. The author expresses gratitude to family members for their financial and emotional support. Finally, it thanks colleagues for sharing ideas, and his wife for helping to edit and compile the paper.
2016 workplace innovation influence on occupational safety and healthKassu Jilcha (PhD)
This document discusses workplace innovation and its influence on occupational safety and health. It reviews literature on the topics of workplace innovation, innovation approaches, and workplace safety. The literature shows that workplace innovation has been neglected in research despite its significance for workplace safety and health. Workplace innovation involves new interventions in work organization, human resource management, and supportive technologies. However, most innovation research focuses only on new product development. The review found gaps in considering workplace innovation's impact on occupational safety and health, indicating a need for further research on this relationship.
This paper investigates how lean thinking can improve occupational safety and health in manufacturing industries. It discusses how developing countries are expanding their manufacturing industries through technology transfer but often neglect workplace safety, resulting in lost productivity from accidents, absenteeism, and equipment damage. The paper reviews literature showing little attention to lean safety practices. It also analyzes illustrative safety data from Ethiopian manufacturing that revealed over 1,600 accidents in 2012, costing over 11,000 lost work days. This suggests Ethiopian companies are unaware of how lean tools like 5S can reduce these costs. The study concludes lean occupational safety and health approaches can help manufacturing industries cut non-value-added waste from improved safety management.
2017 knowledge diffusion to workplace safety and health improvementKassu Jilcha (PhD)
This document discusses knowledge diffusion as it relates to improving workplace safety and health. It identifies several challenges in developing countries like workplace hazards, high costs, lost productivity, and lack of management awareness. The key cause of these challenges is the lack of awareness about preventing workplace safety hazards. The paper then discusses how knowledge diffusion through a conceptual model could help address these issues by improving policy, knowledge dissemination, implementation, evaluation and impact. It argues that knowledge diffusion is important for developing economies to improve workplace safety and awareness.
The document discusses variational autoencoders (VAEs) and generative models. It provides an overview of VAE algorithms, including the reparameterization trick. The document also discusses using generative models for semi-supervised learning and how they can help visualize latent spaces. Generative adversarial networks (GANs) are mentioned as providing an alternative way to learn the loss function for generative models. References are provided for further reading on VAEs, GANs, and related topics.
This document provides information about a study on AB Bank Limited in Bangladesh, including a discussion of corporate social responsibility and the banking sector in Bangladesh. The document contains information on the journal it was published in, including publication details.
This document provides a summary of three articles published in the Global Journal of Science Frontier Research: Chemistry. The articles discuss the synthesis and biological activities of chromium soaps, analysis of chromium using atomic absorption, and nanocomposite materials based on digestion. The document also lists publication details such as volume number, issue number, and publisher information.
This document provides information on a publication by the International Atomic Energy Agency (IAEA) regarding the operation and maintenance of gas and liquid targets for producing radionuclides using cyclotrons. It discusses two categories of IAEA publications - one presenting guidance and methodologies, and one complementing information in the first category. It also provides details on the objectives of the IAEA's radioisotope program, the intended readership of the publications, and how to access and provide feedback on the publications.
2016 book published road accidents and safety from addis ababa to hawassaKassu Jilcha (PhD)
This document provides acknowledgements and thanks from the author for those who assisted with his dissertation. It thanks his advisors, Dr. Daniel Kitaw and Mr. Gulelat Gatew, for their guidance and support throughout the dissertation process. It also thanks Ato Abebe Asrat from the Ethiopian Transport Authority, various police commissions, and the Ethiopian Road Authority for providing data and comments. The author expresses gratitude to family members for their financial and emotional support. Finally, it thanks colleagues for sharing ideas, and his wife for helping to edit and compile the paper.
2016 workplace innovation influence on occupational safety and healthKassu Jilcha (PhD)
This document discusses workplace innovation and its influence on occupational safety and health. It reviews literature on the topics of workplace innovation, innovation approaches, and workplace safety. The literature shows that workplace innovation has been neglected in research despite its significance for workplace safety and health. Workplace innovation involves new interventions in work organization, human resource management, and supportive technologies. However, most innovation research focuses only on new product development. The review found gaps in considering workplace innovation's impact on occupational safety and health, indicating a need for further research on this relationship.
This paper investigates how lean thinking can improve occupational safety and health in manufacturing industries. It discusses how developing countries are expanding their manufacturing industries through technology transfer but often neglect workplace safety, resulting in lost productivity from accidents, absenteeism, and equipment damage. The paper reviews literature showing little attention to lean safety practices. It also analyzes illustrative safety data from Ethiopian manufacturing that revealed over 1,600 accidents in 2012, costing over 11,000 lost work days. This suggests Ethiopian companies are unaware of how lean tools like 5S can reduce these costs. The study concludes lean occupational safety and health approaches can help manufacturing industries cut non-value-added waste from improved safety management.
2017 knowledge diffusion to workplace safety and health improvementKassu Jilcha (PhD)
This document discusses knowledge diffusion as it relates to improving workplace safety and health. It identifies several challenges in developing countries like workplace hazards, high costs, lost productivity, and lack of management awareness. The key cause of these challenges is the lack of awareness about preventing workplace safety hazards. The paper then discusses how knowledge diffusion through a conceptual model could help address these issues by improving policy, knowledge dissemination, implementation, evaluation and impact. It argues that knowledge diffusion is important for developing economies to improve workplace safety and awareness.
The document discusses variational autoencoders (VAEs) and generative models. It provides an overview of VAE algorithms, including the reparameterization trick. The document also discusses using generative models for semi-supervised learning and how they can help visualize latent spaces. Generative adversarial networks (GANs) are mentioned as providing an alternative way to learn the loss function for generative models. References are provided for further reading on VAEs, GANs, and related topics.
Sreedharan Arumugam has over 19 years of experience as a senior consultant and database administrator. He has expertise in SAP HANA, Sybase replication, Oracle, and other databases. Some of his significant projects include working as a senior presales advisor for SAP where he presented database solutions to customers in Southeast Asia, and as a lead Sybase DBA for Fidelity Investments where he maintained databases of 6000GB in size. He is proficient in areas like database architecture, backup/recovery, high availability, and has delivered many successful projects for clients across the world.
This document provides information about the 3Com 3C32700 12-port hub, including how to purchase it, payment and shipping details, warranty information, and additional services from Launch 3 Telecom related to telecom equipment installation, repair, and recycling. Launch 3 Telecom is a telecom equipment supplier and provider of related services.
Sharon S Kumar is a mechanical engineer with over 5 years of experience in piping, MEP projects, firefighting, and water treatment. She has worked as a project and estimation engineer in the UAE and India, where her responsibilities included estimation, design, procurement, installation, testing, and maintenance of MEP, HVAC, firefighting, and water treatment systems. She holds a Bachelor of Technology degree in Mechanical Engineering and is proficient in AutoCAD, MS Office, and communications in English, Hindi, Malayalam, and Tamil.
This document provides information about purchasing a 3Com 3CR17151-93 product from Launch 3 Telecom. It details how to purchase the product via phone, email, or by filling out a request form online. It also provides information about payment methods, same-day shipping and tracking, warranty, and additional services offered by Launch 3 Telecom such as repairs.
עו"ד אלכס כהן זוכה בערעור במחוזי בתביעה שטריתAlexander Cohen
This 7 page document dated February 22nd, 2017 contains information spread across its 7 pages. While the specific contents are not provided, the document covers a topic or topics through 7 sequentially numbered sections.
Shdiba Khan is an experienced HR and administrative professional seeking a new position. She has over 10 years of experience in HR, administration, and office management. Her skills include records management, event planning, database administration, training coordination, and proficiency in Microsoft Office programs. She holds a bachelor's degree in arts and has pursued further education in business administration. Her previous roles include positions as a corporate manager, HR manager, assistant HR manager, and senior HR executive, where she was responsible for tasks like payroll management, policy development, travel coordination, and staff training.
El Secretario General de la OEA, Luis Almagro, le escribe a Rosa María Payá para informarle que no podrá asistir a la entrega del premio Oswaldo Payá en La Habana debido a que el Consulado de Cuba en Washington le denegó la visa. Almagro también detalla las razones que el Consulado cubano dio para negarle la visa, incluyendo que consideran que su visita y la ceremonia son una "provocación inaceptable" y que caracterizan las actividades de "Cuba Decide" como que socavan al sistema electoral cubano
impact of microcredit on agricultural development in Sindh Pakistansanaullah noonari
Abstract- Balochistan Rural Support Programme (BRSP) is a non-governmental organization working in
rural areas of Balochistan province since 1983. Its head office is situated in Quetta, Baluchistan, Pakistan,
sub-office is located in Islamabad, and a number of district offices are located in various districts of
Balochistan. It is clear that majority of the respondents 90 percent of the sample were male and 10
percent were females in district Mastung Balochistan. The respondents 86.66 percent had availed the
loan facility only for once and that too for the first time. 11.66 percent had availed this facility twice and
only 11.66 percent of them took loan three times. The respondents 40.00% were 25000, 16.66% were
40000.00, 20.00% were 50000.00, 13.33% were 60000.00 and 10.00% were above 80000.00 rupees
amount loans. 30.00% were get for seed, 23.33% were Pesticide, 26.66% were Fertilizer and 16.66% were
Others purposes.
Keywords: BRSP, impact of microcredit, agricultural development.
Impact of Microcredit on Agricultural Development in DistrictMastung Balochis...sanaullah noonari
Abstract- Balochistan Rural Support Programme (BRSP) is a non-governmental organization working in
rural areas of Balochistan province since 1983. Its head office is situated in Quetta, Baluchistan, Pakistan,
sub-office is located in Islamabad, and a number of district offices are located in various districts of
Balochistan. It is clear that majority of the respondents 90 percent of the sample were male and 10
percent were females in district Mastung Balochistan. The respondents 86.66 percent had availed the
loan facility only for once and that too for the first time. 11.66 percent had availed this facility twice and
only 11.66 percent of them took loan three times. The respondents 40.00% were 25000, 16.66% were
40000.00, 20.00% were 50000.00, 13.33% were 60000.00 and 10.00% were above 80000.00 rupees
amount loans. 30.00% were get for seed, 23.33% were Pesticide, 26.66% were Fertilizer and 16.66% were
Others purposes.
Keywords: BRSP, impact of microcredit, agricultural development.
Global Medical Cures™ | PCAST Report- Combating Antibiotic ResistanceGlobal Medical Cures™
Global Medical Cures™ | PCAST Report- Combating Antibiotic Resistance
DISCLAIMER-
Global Medical Cures™ does not offer any medical advice, diagnosis, treatment or recommendations. Only your healthcare provider/physician can offer you information and recommendations for you to decide about your healthcare choices.
Industrialization of Biology: A roadmap to accelerate the advanced manufactur...Ilya Klabukov
The document is about registering for free PDF downloads from the National Academies Press online. It provides information about accessing publications from the National Academies of Sciences, Engineering, and Medicine. Key details include:
- Registering allows for instant access to free PDF downloads and notifications of new releases in fields of interest.
- Strict prohibitions on copying or distributing the PDF without permission.
- The PDF available is about industrializing biology to accelerate advanced manufacturing of chemicals.
This document discusses the staging of vulvar cancer according to the International Federation of Gynecology and Obstetrics (FIGO). It describes the anatomy relevant to vulvar cancer staging, including the primary site, nodal stations, and metastatic sites. It then outlines the FIGO surgical staging classification for vulvar cancer, which is based on surgical findings and pathological evaluation. The staging system was last updated in 2009 to provide better prognostic discrimination between stages. The summary describes the key aspects of the FIGO staging system for vulvar cancer.
The document summarizes biomedical engineering and medical device development in the Dallas-Fort Worth area. It discusses:
1) An overview of the IEEE Engineering in Medicine and Biology Society (EMBS), including its mission, membership, publications, conferences and awards.
2) Details about the Dallas EMBS chapter, including its growth in membership, seminars and conferences like the annual IEEE Medical Device Symposium.
3) An overview of medical device company St. Jude Medical and its product portfolio, R&D expenditures and major divisions.
4) Two case studies of medical device development - a spinal cord stimulation system and leadless cardiac pacemaker battery.
This document provides details about a National Academies of Sciences, Engineering, and Medicine report on improving characterization of anthropogenic methane emissions in the United States. It includes information about accessing the full PDF report, contributors to the report, the committee that authored the report, and organizations that supported the study. The report examines approaches to measuring, monitoring and developing inventories of methane emissions with the goal of improving accuracy and verifiability of U.S. methane emissions inventories.
Tomás J. Aragón is the health officer of the City and County of San Francisco and director of the Population Health Division at the San Francisco Department of Public Health. He has over 30 years of experience in public health, including epidemiology, infectious disease, and health leadership. He teaches epidemiology and data science at UC Berkeley and maintains blogs on population health data science and lean approaches.
Pressure BioSciences is presenting their pressure cycling technology instruments and consumables. Their flagship product is the Barocycler 2320EXTREME instrument, which uses high pressure cycling to prepare biological samples for analysis. They have over 270 PCT systems installed worldwide and publications highlighting the advantages of PCT in biopharma sample preparation from discovery to clinical use. The company is poised for growth with their exclusive marketing agreement with SCIEX, expanded sales team, and focus on the multi-billion dollar biopharma market.
International Journal of Biometrics and Bioinformatics(IJBB) Volume (4) Issue...CSCJournals
This document summarizes a research paper that proposes techniques for identifying untrained facial images during testing in a facial recognition system. The paper describes creating a feature space called Combined Global and Local Preserving Features (CGLPF) that captures discriminative features between subjects using LDA for global features and LPP for local features. It then proposes two techniques for identifying untrained images: 1) Using a threshold based on average minimum matching distances of incorrect classifications during training, and 2) Using the fact that incorrect classifications increase the ratio of within-class to between-class distances while correct classifications decrease the ratio. The techniques are evaluated on 400 images from the ORL database and results are compared.
This document provides information about biomedical technology and bioengineering college majors and careers. As a major in these fields, students will build foundations to work in areas like cancer research, medical device invention, and surgical robotics. These are high-paying careers with opportunities for advancement. Majors may focus on areas like biomechanics, biomolecular engineering, and medical imaging. Strong programs are offered at universities like MIT, Johns Hopkins, Stanford, and UC San Diego. Relevant associations include the Biomedical Engineering Society and National Institute of Biomedical Imaging and Bioengineering.
International Journal of Biometrics and Bioinformatics(IJBB) Volume (4) Issu...CSCJournals
This is the third issue of volume four of International Journal of Biometric and
Bioinformatics (IJBB). The Journal is published bi-monthly, with papers being
peer reviewed to high international standards. The International Journal of
Biometric and Bioinformatics is not limited to a specific aspect of Biology but
it is devoted to the publication of high quality papers on all division of Bio in
general. IJBB intends to disseminate knowledge in the various disciplines of
the Biometric field from theoretical, practical and analytical research to
physical implications and theoretical or quantitative discussion intended for
academic and industrial progress. In order to position IJBB as one of the
good journal on Bio-sciences, a group of highly valuable scholars are serving
on the editorial board. The International Editorial Board ensures that
significant developments in Biometrics from around the world are reflected in
the Journal. Some important topics covers by journal are Bio-grid, biomedical
image processing (fusion), Computational structural biology, Molecular
sequence analysis, Genetic algorithms etc.
9th International Conference on Biotechnology, Bio Informatics, Bio Medical S...Global R & D Services
Conference Name: 9th International Conference on Biotechnology, Bio Informatics, Bio Medical Sciences and Stem Cell Applications (B3SC), 30-31 Dec 2016, Bangkok, Thailand
Conference Dates: 30-31 Dec, 2016
Conference Venue: Asian Institute of Technology (AIT), Conference Center, Bangkok, Thailand
Deadline for Abstract/Paper Submissions: Dec 27, 2016
Contact E-Mail ID: info@iaphlsr.org
Conference Convener: Dr. Pallavi R
Languages: English, Chinese, Arabic, Thai, Persian
http://iaphlsr.org/9th-international-conference-on-biotechnology-bio-informatics-bio-medical-sciences-and-stem-cell-applications-b3sc-30-31-dec-2016-bangkok-thailand-about-24
Sreedharan Arumugam has over 19 years of experience as a senior consultant and database administrator. He has expertise in SAP HANA, Sybase replication, Oracle, and other databases. Some of his significant projects include working as a senior presales advisor for SAP where he presented database solutions to customers in Southeast Asia, and as a lead Sybase DBA for Fidelity Investments where he maintained databases of 6000GB in size. He is proficient in areas like database architecture, backup/recovery, high availability, and has delivered many successful projects for clients across the world.
This document provides information about the 3Com 3C32700 12-port hub, including how to purchase it, payment and shipping details, warranty information, and additional services from Launch 3 Telecom related to telecom equipment installation, repair, and recycling. Launch 3 Telecom is a telecom equipment supplier and provider of related services.
Sharon S Kumar is a mechanical engineer with over 5 years of experience in piping, MEP projects, firefighting, and water treatment. She has worked as a project and estimation engineer in the UAE and India, where her responsibilities included estimation, design, procurement, installation, testing, and maintenance of MEP, HVAC, firefighting, and water treatment systems. She holds a Bachelor of Technology degree in Mechanical Engineering and is proficient in AutoCAD, MS Office, and communications in English, Hindi, Malayalam, and Tamil.
This document provides information about purchasing a 3Com 3CR17151-93 product from Launch 3 Telecom. It details how to purchase the product via phone, email, or by filling out a request form online. It also provides information about payment methods, same-day shipping and tracking, warranty, and additional services offered by Launch 3 Telecom such as repairs.
עו"ד אלכס כהן זוכה בערעור במחוזי בתביעה שטריתAlexander Cohen
This 7 page document dated February 22nd, 2017 contains information spread across its 7 pages. While the specific contents are not provided, the document covers a topic or topics through 7 sequentially numbered sections.
Shdiba Khan is an experienced HR and administrative professional seeking a new position. She has over 10 years of experience in HR, administration, and office management. Her skills include records management, event planning, database administration, training coordination, and proficiency in Microsoft Office programs. She holds a bachelor's degree in arts and has pursued further education in business administration. Her previous roles include positions as a corporate manager, HR manager, assistant HR manager, and senior HR executive, where she was responsible for tasks like payroll management, policy development, travel coordination, and staff training.
El Secretario General de la OEA, Luis Almagro, le escribe a Rosa María Payá para informarle que no podrá asistir a la entrega del premio Oswaldo Payá en La Habana debido a que el Consulado de Cuba en Washington le denegó la visa. Almagro también detalla las razones que el Consulado cubano dio para negarle la visa, incluyendo que consideran que su visita y la ceremonia son una "provocación inaceptable" y que caracterizan las actividades de "Cuba Decide" como que socavan al sistema electoral cubano
impact of microcredit on agricultural development in Sindh Pakistansanaullah noonari
Abstract- Balochistan Rural Support Programme (BRSP) is a non-governmental organization working in
rural areas of Balochistan province since 1983. Its head office is situated in Quetta, Baluchistan, Pakistan,
sub-office is located in Islamabad, and a number of district offices are located in various districts of
Balochistan. It is clear that majority of the respondents 90 percent of the sample were male and 10
percent were females in district Mastung Balochistan. The respondents 86.66 percent had availed the
loan facility only for once and that too for the first time. 11.66 percent had availed this facility twice and
only 11.66 percent of them took loan three times. The respondents 40.00% were 25000, 16.66% were
40000.00, 20.00% were 50000.00, 13.33% were 60000.00 and 10.00% were above 80000.00 rupees
amount loans. 30.00% were get for seed, 23.33% were Pesticide, 26.66% were Fertilizer and 16.66% were
Others purposes.
Keywords: BRSP, impact of microcredit, agricultural development.
Impact of Microcredit on Agricultural Development in DistrictMastung Balochis...sanaullah noonari
Abstract- Balochistan Rural Support Programme (BRSP) is a non-governmental organization working in
rural areas of Balochistan province since 1983. Its head office is situated in Quetta, Baluchistan, Pakistan,
sub-office is located in Islamabad, and a number of district offices are located in various districts of
Balochistan. It is clear that majority of the respondents 90 percent of the sample were male and 10
percent were females in district Mastung Balochistan. The respondents 86.66 percent had availed the
loan facility only for once and that too for the first time. 11.66 percent had availed this facility twice and
only 11.66 percent of them took loan three times. The respondents 40.00% were 25000, 16.66% were
40000.00, 20.00% were 50000.00, 13.33% were 60000.00 and 10.00% were above 80000.00 rupees
amount loans. 30.00% were get for seed, 23.33% were Pesticide, 26.66% were Fertilizer and 16.66% were
Others purposes.
Keywords: BRSP, impact of microcredit, agricultural development.
Global Medical Cures™ | PCAST Report- Combating Antibiotic ResistanceGlobal Medical Cures™
Global Medical Cures™ | PCAST Report- Combating Antibiotic Resistance
DISCLAIMER-
Global Medical Cures™ does not offer any medical advice, diagnosis, treatment or recommendations. Only your healthcare provider/physician can offer you information and recommendations for you to decide about your healthcare choices.
Industrialization of Biology: A roadmap to accelerate the advanced manufactur...Ilya Klabukov
The document is about registering for free PDF downloads from the National Academies Press online. It provides information about accessing publications from the National Academies of Sciences, Engineering, and Medicine. Key details include:
- Registering allows for instant access to free PDF downloads and notifications of new releases in fields of interest.
- Strict prohibitions on copying or distributing the PDF without permission.
- The PDF available is about industrializing biology to accelerate advanced manufacturing of chemicals.
This document discusses the staging of vulvar cancer according to the International Federation of Gynecology and Obstetrics (FIGO). It describes the anatomy relevant to vulvar cancer staging, including the primary site, nodal stations, and metastatic sites. It then outlines the FIGO surgical staging classification for vulvar cancer, which is based on surgical findings and pathological evaluation. The staging system was last updated in 2009 to provide better prognostic discrimination between stages. The summary describes the key aspects of the FIGO staging system for vulvar cancer.
The document summarizes biomedical engineering and medical device development in the Dallas-Fort Worth area. It discusses:
1) An overview of the IEEE Engineering in Medicine and Biology Society (EMBS), including its mission, membership, publications, conferences and awards.
2) Details about the Dallas EMBS chapter, including its growth in membership, seminars and conferences like the annual IEEE Medical Device Symposium.
3) An overview of medical device company St. Jude Medical and its product portfolio, R&D expenditures and major divisions.
4) Two case studies of medical device development - a spinal cord stimulation system and leadless cardiac pacemaker battery.
This document provides details about a National Academies of Sciences, Engineering, and Medicine report on improving characterization of anthropogenic methane emissions in the United States. It includes information about accessing the full PDF report, contributors to the report, the committee that authored the report, and organizations that supported the study. The report examines approaches to measuring, monitoring and developing inventories of methane emissions with the goal of improving accuracy and verifiability of U.S. methane emissions inventories.
Tomás J. Aragón is the health officer of the City and County of San Francisco and director of the Population Health Division at the San Francisco Department of Public Health. He has over 30 years of experience in public health, including epidemiology, infectious disease, and health leadership. He teaches epidemiology and data science at UC Berkeley and maintains blogs on population health data science and lean approaches.
Pressure BioSciences is presenting their pressure cycling technology instruments and consumables. Their flagship product is the Barocycler 2320EXTREME instrument, which uses high pressure cycling to prepare biological samples for analysis. They have over 270 PCT systems installed worldwide and publications highlighting the advantages of PCT in biopharma sample preparation from discovery to clinical use. The company is poised for growth with their exclusive marketing agreement with SCIEX, expanded sales team, and focus on the multi-billion dollar biopharma market.
International Journal of Biometrics and Bioinformatics(IJBB) Volume (4) Issue...CSCJournals
This document summarizes a research paper that proposes techniques for identifying untrained facial images during testing in a facial recognition system. The paper describes creating a feature space called Combined Global and Local Preserving Features (CGLPF) that captures discriminative features between subjects using LDA for global features and LPP for local features. It then proposes two techniques for identifying untrained images: 1) Using a threshold based on average minimum matching distances of incorrect classifications during training, and 2) Using the fact that incorrect classifications increase the ratio of within-class to between-class distances while correct classifications decrease the ratio. The techniques are evaluated on 400 images from the ORL database and results are compared.
This document provides information about biomedical technology and bioengineering college majors and careers. As a major in these fields, students will build foundations to work in areas like cancer research, medical device invention, and surgical robotics. These are high-paying careers with opportunities for advancement. Majors may focus on areas like biomechanics, biomolecular engineering, and medical imaging. Strong programs are offered at universities like MIT, Johns Hopkins, Stanford, and UC San Diego. Relevant associations include the Biomedical Engineering Society and National Institute of Biomedical Imaging and Bioengineering.
International Journal of Biometrics and Bioinformatics(IJBB) Volume (4) Issu...CSCJournals
This is the third issue of volume four of International Journal of Biometric and
Bioinformatics (IJBB). The Journal is published bi-monthly, with papers being
peer reviewed to high international standards. The International Journal of
Biometric and Bioinformatics is not limited to a specific aspect of Biology but
it is devoted to the publication of high quality papers on all division of Bio in
general. IJBB intends to disseminate knowledge in the various disciplines of
the Biometric field from theoretical, practical and analytical research to
physical implications and theoretical or quantitative discussion intended for
academic and industrial progress. In order to position IJBB as one of the
good journal on Bio-sciences, a group of highly valuable scholars are serving
on the editorial board. The International Editorial Board ensures that
significant developments in Biometrics from around the world are reflected in
the Journal. Some important topics covers by journal are Bio-grid, biomedical
image processing (fusion), Computational structural biology, Molecular
sequence analysis, Genetic algorithms etc.
9th International Conference on Biotechnology, Bio Informatics, Bio Medical S...Global R & D Services
Conference Name: 9th International Conference on Biotechnology, Bio Informatics, Bio Medical Sciences and Stem Cell Applications (B3SC), 30-31 Dec 2016, Bangkok, Thailand
Conference Dates: 30-31 Dec, 2016
Conference Venue: Asian Institute of Technology (AIT), Conference Center, Bangkok, Thailand
Deadline for Abstract/Paper Submissions: Dec 27, 2016
Contact E-Mail ID: info@iaphlsr.org
Conference Convener: Dr. Pallavi R
Languages: English, Chinese, Arabic, Thai, Persian
http://iaphlsr.org/9th-international-conference-on-biotechnology-bio-informatics-bio-medical-sciences-and-stem-cell-applications-b3sc-30-31-dec-2016-bangkok-thailand-about-24
Maya Chaddah, Science Communications April 12, 2017Maya Chaddah
This document provides a summary of Maya Chaddah's experience focusing on strategic communications in science, technology, engineering and medicine over 20 years. She has worked on over 140 million dollars in awarded research funding as a project manager, writer, editor, researcher and illustrator for numerous grants and proposals. Her clients include scientists, clinicians, universities and research institutes. She also has experience in medical education, writing online curricula for psychiatry and post-graduate programs at the University of Toronto.
This document provides information on the World Academic Journal of Business & Applied Sciences for March-September 2013. It includes the editorial board, an international editorial review board, a call for papers, and a table of contents for the journal issues in that period. The call for papers describes the journal's mission of publishing academically robust papers on topics related to business, management, and applied sciences. It provides examples of topics of interest and submission guidelines. The table of contents lists the title, authors, and page numbers for research articles published across various journals in the specified issues.
Dr. Sundos Hamza is an experienced medical researcher and instructor who outlined the importance of research in clinical careers. Research allows clinicians to critically evaluate their own practice, advance their field, and question different approaches objectively. It provides opportunities to work for well-known organizations, link with international communities, and participate in global work. Clinical research jobs include roles like clinical research associates and clinical scientists with average salaries in the UK of £32,087 and £39,183 respectively. General tips included starting with basic research and adjusting it over one's clinical career, continuously developing skills, and pursuing interests for years to come.
Ogan Gurel has over 30 years of experience in healthcare, life sciences, strategy, technology, and research. He has held executive positions including Chief Innovation Officer and Director of Samsung Advanced Institute of Technology. He has a strong clinical, scientific, and academic background and has published numerous research papers and obtained several patents. He currently holds a long-term resident visa in South Korea.
This book covers techniques for detecting, diagnosing, and treating breast cancer using various medical imaging modalities such as mammography, MRI, CT, PET, ultrasound, infrared imaging, and others. It aims to be useful for researchers, doctors, educators, and students in fields related to biomedical sciences, medical imaging, and engineering. The book editors have extensive experience in areas like biomedical engineering, computational fluid dynamics, signal processing, and medical imaging, especially regarding breast cancer detection and analysis.
International Journal of Composite Materials and Matrices
is focused to provide a platform for recent trends in elastic–plastic properties, Strain softening and strain-rate sensitivity damage, impact damage, fracture repair techniques, modeling and numerical simulation. All the articles published in the journal go through stringent process of peer-reviewing.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Null Bangalore | Pentesters Approach to AWS IAMDivyanshu
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
E journal gjre-(g)_vol_16_issue_1
1. Stockout in a Jute Industry Comparative Analysis of Weight
Lean Influence on Occupational Occupational Safety and Health
Online ISSN : 2249-4596
Print ISSN : 0975-5861
DOI : 10.17406/GJRE
VOLUME16ISSUE1VERSION1.0
2. Global Journal of Researches in Engineering: G
Industrial Engineering
3. Global Journal of Researches in Engineering: G
Industrial Engineering
Volume 16 Issue 1 (Ver. 1.0)
Open Association of Research Society
5. John A. Hamilton,Drew Jr.,
Ph.D., Professor, Management
Computer Science and Software
Engineering
Director, Information Assurance
Laboratory
Auburn University
Dr. Wenying Feng
Professor, Department of Computing
Information Systems
Department of Mathematics
Trent University, Peterborough,
ON Canada K9J 7B8
Dr. Henry Hexmoor
IEEE senior member since 2004
Ph.D. Computer Science, University at
Buffalo
Department of Computer Science
Southern Illinois University at Carbondale
Dr. Thomas Wischgoll
Computer Science and Engineering,
Wright State University, Dayton, Ohio
B.S., M.S., Ph.D.
(University of Kaiserslautern)
Dr. Osman Balci, Professor
Department of Computer Science
Virginia Tech, Virginia University
Ph.D.and M.S.Syracuse University,
Syracuse, New York
M.S. and B.S. Bogazici University,
Istanbul, Turkey
Dr. Abdurrahman Arslanyilmaz
Computer Science Information Systems
Department
Youngstown State University
Ph.D., Texas AM University
University of Missouri, Columbia
Gazi University, Turkey
Yogita Bajpai
M.Sc. (Computer Science), FICCT
U.S.A.Email:
yogita@computerresearch.org
Dr. Xiaohong He
Professor of International Business
University of Quinnipiac
BS, Jilin Institute of Technology; MA, MS,
PhD,. (University of Texas-Dallas)
Dr. T. David A. Forbes
Associate Professor and Range
Nutritionist
Ph.D. Edinburgh University - Animal
Nutrition
M.S. Aberdeen University - Animal
Nutrition
B.A. University of Dublin- Zoology
Burcin Becerik-Gerber
University of Southern California
Ph.D. in Civil Engineering
DDes from Harvard University
M.S. from University of California, Berkeley
Istanbul University
Integrated Editorial Board
(Computer Science, Engineering, Medical, Management, Natural
Science, Social Science)
6. Dr. Bart Lambrecht
Director of Research in Accounting and
FinanceProfessor of Finance
Lancaster University Management School
BA (Antwerp); MPhil, MA, PhD
(Cambridge)
Dr. Söhnke M. Bartram
Department of Accounting and
FinanceLancaster University Management
SchoolPh.D. (WHU Koblenz)
MBA/BBA (University of Saarbrücken)
Dr. Carlos García Pont
Associate Professor of Marketing
IESE Business School, University of
Navarra
Doctor of Philosophy (Management),
Massachusetts Institute of Technology
(MIT)
Master in Business Administration, IESE,
University of Navarra
Degree in Industrial Engineering,
Universitat Politècnica de Catalunya
Dr. Miguel Angel Ariño
Professor of Decision Sciences
IESE Business School
Barcelona, Spain (Universidad de Navarra)
CEIBS (China Europe International Business
School).
Beijing, Shanghai and Shenzhen
Ph.D. in Mathematics
University of Barcelona
BA in Mathematics (Licenciatura)
University of Barcelona
Dr. Fotini Labropulu
Mathematics - Luther College
University of ReginaPh.D., M.Sc. in
Mathematics
B.A. (Honors) in Mathematics
University of Windso
Philip G. Moscoso
Technology and Operations Management
IESE Business School, University of Navarra
Ph.D in Industrial Engineering and
Management, ETH Zurich
M.Sc. in Chemical Engineering, ETH Zurich
Dr. Lynn Lim
Reader in Business and Marketing
Roehampton University, London
BCom, PGDip, MBA (Distinction), PhD,
FHEA
Dr. Sanjay Dixit, M.D.
Director, EP Laboratories, Philadelphia VA
Medical Center
Cardiovascular Medicine - Cardiac
Arrhythmia
Univ of Penn School of Medicine
Dr. Mihaly Mezei
ASSOCIATE PROFESSOR
Department of Structural and Chemical
Biology, Mount Sinai School of Medical
Center
Ph.D., Etvs Lornd University
Postdoctoral Training,
New York University
Dr. Han-Xiang Deng
MD., Ph.D
Associate Professor and Research
Department Division of Neuromuscular
Medicine
Davee Department of Neurology and Clinical
NeuroscienceNorthwestern University
Feinberg School of Medicine
7. Dr. Pina C. Sanelli
Associate Professor of Public Health
Weill Cornell Medical College
Associate Attending Radiologist
NewYork-Presbyterian Hospital
MRI, MRA, CT, and CTA
Neuroradiology and Diagnostic
Radiology
M.D., State University of New York at
Buffalo,School of Medicine and
Biomedical Sciences
Dr. Roberto Sanchez
Associate Professor
Department of Structural and Chemical
Biology
Mount Sinai School of Medicine
Ph.D., The Rockefeller University
Dr. Wen-Yih Sun
Professor of Earth and Atmospheric
SciencesPurdue University Director
National Center for Typhoon and
Flooding Research, Taiwan
University Chair Professor
Department of Atmospheric Sciences,
National Central University, Chung-Li,
TaiwanUniversity Chair Professor
Institute of Environmental Engineering,
National Chiao Tung University, Hsin-
chu, Taiwan.Ph.D., MS The University of
Chicago, Geophysical Sciences
BS National Taiwan University,
Atmospheric Sciences
Associate Professor of Radiology
Dr. Michael R. Rudnick
M.D., FACP
Associate Professor of Medicine
Chief, Renal Electrolyte and
Hypertension Division (PMC)
Penn Medicine, University of
Pennsylvania
Presbyterian Medical Center,
Philadelphia
Nephrology and Internal Medicine
Certified by the American Board of
Internal Medicine
Dr. Bassey Benjamin Esu
B.Sc. Marketing; MBA Marketing; Ph.D
Marketing
Lecturer, Department of Marketing,
University of Calabar
Tourism Consultant, Cross River State
Tourism Development Department
Co-ordinator , Sustainable Tourism
Initiative, Calabar, Nigeria
Dr. Aziz M. Barbar, Ph.D.
IEEE Senior Member
Chairperson, Department of Computer
Science
AUST - American University of Science
Technology
Alfred Naccash Avenue – Ashrafieh
8. Dr. George Perry, (Neuroscientist)
Dean and Professor, College of Sciences
Denham Harman Research Award (American Aging Association)
ISI Highly Cited Researcher, Iberoamerican Molecular Biology Organization
AAAS Fellow, Correspondent Member of Spanish Royal Academy of Sciences
University of Texas at San Antonio
Postdoctoral Fellow (Department of Cell Biology)
Baylor College of Medicine
Houston, Texas, United States
Dr. R.K. Dixit
M.Sc., Ph.D., FICCT
Chief Author, India
Email: authorind@computerresearch.org
President Editor (HON.)
Chief Author (HON.)
Vivek Dubey(HON.)
MS (Industrial Engineering),
MS (Mechanical Engineering)
University of Wisconsin, FICCT
Editor-in-Chief, USA
editorusa@computerresearch.org
Er. Suyog Dixit
(M. Tech), BE (HONS. in CSE), FICCT
SAP Certified Consultant
CEO at IOSRD, GAOR OSS
Technical Dean, Global Journals Inc. (US)
Website: www.suyogdixit.com
Email:suyog@suyogdixit.com
Pritesh Rajvaidya
(MS) Computer Science Department
California State University
BE (Computer Science), FICCT
Technical Dean, USA
Email: pritesh@computerresearch.org
Sangita Dixit
M.Sc., FICCT
Dean Chancellor (Asia Pacific)
deanind@computerresearch.org
Luis Galárraga
J!Research Project Leader
Saarbrücken, Germany
Dean Editor-in-Chief (HON.)
Suyash Dixit
(B.E., Computer Science Engineering), FICCTT
President, Web Administration and
Development CEO at IOSRD
COO at GAOR OSS
,
9. i. Copyright Notice
ii. Editorial Board Members
iii. Chief Author and Dean
iv. Contents of the Issue
1. Lean Influence on Occupational Safety and Health in Manufacturing
Industries. 1-7
2. Comparative Analysis of Weight Loss% of Different Fabrics (Lycra Pique, Rib
and Interlock) Under Different Chemical Concentration. 9-11
3. Economic Lot Scheduling of Time Varying Demand with Stockout in a Jute
Industry. 13-18
v. Fellows
vi. Auxiliary Memberships
vii. Process of Submission of Research Paper
viii. Preferred Author Guidelines
ix. Index
Contents of the Issue