Dust control in industrial operations

SAAMA REF NO:SAAMA01275
“TOUR DE FORCE TRAINING SOLUTIONS- OPTIMISING DEVELOPMENT, ACHIEVING RESULTS’’
Dust Control in Industrial Operations
Build your knowledge of the legislative requirements, fundamental design concepts & tools used to
manage, maintain, operate & evaluate dust collection/ suppression systems & associated equipment…
12-13 September 2016, The Focus Rooms, Sunninghill,Sandton

Dust Control in Industrial
Operations
Benefits of attendingBuild an understanding of applicable OH&S and environmental statutory regulation
Discover your existing system and equipment capabilities and limitations
Appreciate what upgrade considerations can be considered for existing systems and equipment
Review selection and design imperatives for new and existing baghouses, wet scrubbers, fans and
other dust technologies
Identify base design principles for reticulated ductwork systems and collection hood design
principles
Recognise requirements and limitations of equipment, maintenance and operational systems
Participate in a trouble-shooting session of existing systems and equipment
Who should attend• Safety Supervision
• Occupational Health and Safety Representatives and Managers
• Engineering Managers
• Process Engineer
• Plant and project managers
• Operation or Process managers
• Project and maintenance engineers
• Unit operators and superintendents
• Maintenance and operational staff who are responsible for the operation and or maintenance
of dust collection/suppression equipment, including baghouses, wet scrubbers, cyclones, fans
and associated ductwork systems.
• Engineers and supervisor staff responsible for incorporating new equipment and systems
which have the potential to generate fugitive dust
• All those responsible for OH&S and environmental compliance in terms of air quality within
the facility and surrounding atmosphere
Overview
Tour De Force Training Solutions
Tel: +27 11 433 3161
Fax: +27 86 552 8515
Email: info@tdftraining.co.za
Tour De Force Training
Solutions
Tel: +27 11 433 3161
Fax: +27 86 552 8515
Fugitive dust emission and management is a key consideration in industrial operations.
Industries seek to maximise output from their production line and enhancing productivity and capital
efficiency. There is an ever increasing need for management to ensure the operation remains sustainable.
This two day intensive training course will update your knowledge and understanding of all aspects of
fugitive dust control from legislative requirements through concept and detail design to the operation and
maintenance of dust control systems.
Take away best practice principles and procedures that will improve your current operations and future
plant expansions. The course is designed to be interactive, practical, and permit discussion and analysis of
problems encountered on participants’ specific operations.
With ever increasing pressure to ensure environmental and occupational health compliance, it is
increasingly important to ensure that personnel (ranging from managers and supervisory staff through to
maintenance
and operational personnel), have a sound understanding of applicable legislation and technologies available.
This will ensure high levels of compliance.

Your Expert Facilitators
Tel: +27 11 433 3161
Fax: +27 86 552 8515
Operations
GERALD FRANCIS KUHN:
Gerald is an Associate of the Mine Ventilation Society – 1981, Fellow of the Mine Ventilation Society –
since 1988 and he was a
Councillor of the Mine Ventilation Society at the same time, with more than 35years of experience as
ventilation and Dust Control designer and Environmental Engineer.
He is the current Duersctor of Gerry Kuhn Environmental & Hygiene Engineering CC a company he started
in 1997 with headquarters in Piketberg. The company quickly grew a local client base of nearly every
major and many smaller mining operations within the Namaqualand, Bushmanland, and West coast while
consulting to major suppliers in the dust control and ventilation industries.
In 1969 joined Mobil Oil Company in the same field to pursue further experience in he hydraulics field.
Promoted to Engineering Assistant – design & projects.
In 1971 joined the mining industry at Anglo Alpha Cement – Ulco works in the Northern Cape where
studies for the certificate of competency were commenced and experience in the field of ventilation and
hydraulics was pursued. (Institution – Chamber of Mines of South Africa & Society of Engineers – UK &
London University)
in 1973 he Joined De Beers consolidated Mines in Kimberley to further pursue the field of ventilation and
dust control as well as hydraulics. Positions held – design draughtsman – ventilation, senior design
draughtsman, senior environmental officer – design services and finally senior environmental engineer
Chris Loans:
Chris Loans – An Environmental Fallout Dust Monitoring Equipment and Occupational Hygiene Specialist
at Gerry Kuhn Environmental and Hygiene Engineering CC. He was Process Engineer at Mondi Pulp and
Paper - Anglo American - Richard's Bay. He performed some critical Problem solving in the chemical plant
Optimisation of chemical processes Design and commission of new installations.
He holds a Bachelor of Science, Chemical Engineering at University of Cape Town and a Master's degree,
Master of Public Health (Occupational Hygiene) from University of Johannesburg.

Session 1:
Environmental considerations
• Occupational health and environmental
legislation
• Available technologies
• Collection equipment and performance
outcomes
Session 2:
Dust suppression and dry
filtration
• Dust suppression
• Dry filtration (baghouses)
• Design fundamentals and concepts
• Filtration velocities (air to cloth ratios)
• Filter pressure drop as a key indicator
Session 3:
Operations and maintenance
• Reverse pulse (bag) cleaning system operation
and principles
• Filter media selection
• Collected waste disposal
• Maintenance
Session 4:
Wet scrubbers
• Design concepts and types
• Waste disposal and recirculation
Session 5:
Design principles and
limitations
• Ductwork system design concepts and
limitations
• Collection hood and enclosure design
• Hood capture velocities
• System balancing
Session 6:
Fans
• Fan types and applications
• Fan laws
• Exhaust stack emission monitoring
DAY 1: 12 September 2016
Tel: +27 11 433 3161
Fax: +27 86 552 8515
Operations

DAY 2: 13 September 2016
.
Tel: +27 11 433 3161
Fax: +27 86 552 8515
Session 7:
Optimising Power Consumption
to achieve efficiency and power
savings without major cost
spend
• Get knowledge on individual energy using
devices and how they can be made more
efficient
• Advise organisations on how to measure and
reduce energy consumption
• Understand the entire process of conducting an
energy efficiency assessment for a Site, Plant…
Session 8:
How safe is your plant?
• Quantifying the problem - a key first step for
design and troubleshooting
• Is your dust filter a dust explosion hazard?
• Bulk material fire hazards and control
• The dangers of venting
Session 9:
New technologies increasing
plant safety
• Minimising particle attrition and dust
• Bulk material flow modes
• New dust suppression technologies
• New modelling and design techniques - to
ensure reliable and sustainable handling
Operations
Session 10:
Becoming aware of the risk
factors associated with your
particular dusts
• How and why dust composition varies
• What you need to understand about your dust
and its characteristics
• The limitation of relying on material data sheets
• What is dust testing and how is it done
• A look at potential testing reports
• Risk considerations of unknown dust particles
Session 11:
Implementing strong safety
practices
• Work and safety regulations in your state
• Good housekeeping comes first
• Balancing hygiene & hazard protection
• Role of operators, supervisors and managers
• Importance of maintenance

Day 1
07:30 - Registration & Refreshments
08:30 - Workshop Commences
10:30 - Mid Morning Tea Break
10:45 - Workshop Resumes
12:45 - Lunch Break
15:00 - Mid Afternoon Tea Break
16:30 - End of Workshop
SCHEDULE
Tel: +27 11 433 3161
Fax: +27 86 552 8515
Operations
Day 2
08:00 - Workshop Commences
10:30 - Mid Morning Tea Break
12:45 - Lunch Break
15:00 - Mid Afternoon Tea Break
16:00 - End of Workshop

Register and pay by
05 August 2016
and save ZAR 250.00
-You only pay ZAR 8749.00
Register and pay by
19 August 2016
and save ZAR 150.00
-You only pay ZAR 8849.00
Thereafter all registrations are
at the full fee of ZAR 8999.00
Tel: +27 11 433 3161
Fax: +27 86 552 8515
Operations

Yes, Please register me for the Dust Control in Industrial
Operations
12-13 September 2016, The Focus Rooms, Sunninghill
Tel: +27 11 433 3161
Fax: +27 86 552 8515
Operations
P.S
The names on this form will be used for delegates certificates,
Please ensure they are spelt correctly.

Terms and Conditions
• Payment is required in full 5 days from the date of invoice.
• All payments to be made directly to Tour De Force Training Solutions (PTY) Ltd.
• No seats will be reserved, unless Tour De Force Training Solutions (PTY) Ltd receives a signed
registration form.
• Tour De Force Training Solutions (PTY) Ltd reserves the right, due to circumstances beyond
our control, to change speakers, date and venue.
• The signed registration form is a legally binding contract.
Cancellations:
• All cancellations will be subject to approval by the management of Tour De Force Training Solutions (PTY) Ltd.
• All cancellations made 7 days prior to the above date mentioned event will be subject to a 50% cancellation
fee.
• Cancellations made within 7 days of the above mentioned date of the event,
will be subject to a 100% cancellation fee.
• There will be no refunds or credit vouchers on substitutions.
• Delegates must inform Tour De Force Training Solutions (PTY) Ltd in writing of any substitutions.
• There is no charge for substitutions.
• Tour De Force Training Solutions (PTY) Ltd will not be liable for incorrect Delegates details on certificates etc,
in the event of substitutions made on the day of the conference. In the event of Tour De Force Training
Solutions (PTY) Ltd having to postpone an event due to circumstances beyond our control, Delegates will be
issued with a credit voucher, which can be used at another of our events. Tour De Force Training Solutions (PTY)
Ltd will not be liable for travel and accommodation costs.
Confirmation:
All registrations received will be taken as confirmed and are subject to these terms and conditions.
Accommodation:
Please call or email our office for a list of accommodation that is relevantly close to the training venue.
Tel: +27 11 433 3161
Fax: +27 86 552 8515
Operations
FOR IN-HOUSE
TRAINING
PLEASE CALL
OUR OFFICE
Telephone:+27 11 433 3161
Fax:+27 86 552 8515
Email:info@tdftraining.co.za

Dust control in industrial operations

Recommended

Recommended

More Related Content

Similar to Dust control in industrial operations

Similar to Dust control in industrial operations (20)

Recently uploaded

Recently uploaded (20)

Dust control in industrial operations