division of fire alarm areas
•
0 likes•6 views
Alarm area is a unit that divides the warning range of automatic fire alarm system according to fire zone or floor. An alarm area includes a plurality of detection areas. The purpose of dividing the alarm area is to determine the location of the alarm and fire. At the same time, it is convenient to solve the problem of fire control system linkage design. The alarm area should be divided according to the fire zone or floor. You can also divide several adjacent fire zones or floors that need to be simultaneously linked with fire fighting equipment into an alarm area in case of fire.
Report
Share
Report
Share
Download to read offline
Recommended
wireless fire alarm installation and debugging procedures.pdf
Professional wireless fire alarm and fire linkage security system.
It is easy to install without wiring.
It is easy to program with free PC software.
It is professional security fire alarm and automatical fire fighting with loop linkage and direct linkage with smoke exhaust, electric fan, hydrant etc.
Complete wireless fire alarm system at vedardsecurity.com
linkage of gas fire extinguishing system with fire alarm
Gas fire extinguishing device and foam fire extinguishing device usually adopt independent fire extinguishing controller. When the fire detector in its protected area is directly connected to the fire extinguishing controller, the alarm linkage control of each stage and the feedback signal of the system shall be immediately fed back to the fire extinguishing linkage controller, and the fire extinguishing linkage controller shall start the alarm linkage control process according to the specification requirements.
After the fire linkage controller receives the feedback signal, is it necessary to activate all the fire audible and visual alarms and fire broadcasting in the building? Is it necessary to turn on the smoke control and exhaust system and the emergency lighting evacuation indicator system?
Fire alarm and gas extinguishing system instruction
Gas fire extinguishing control system is mainly composed of gas fire extinguishing controller, fire detectors, manual /automatic switch, emergency start/stop button, sound/light alarm, gas spraying indicator light, etc.
Among them, Generally, smoke detectors and heat detectors are used as fire detectors.
Manual alarm button or other types of fire detectors can also be used in special cases.
Gas extinguishing controller linkage control gas fire extinguishing equipment, linkage control fan, Air valve fire valve, Ventilation and air conditioning, Automatic doors and Windows and other equipment. And receive feedback signals.
test of gas fire extinguishing system
The gas fire extinguishing system project requires the implementation of simulated start-up tests to verify the reliability of the gas fire extinguishing system. The simulated start test shall be carried out after the installation and debugging of gas equipment, alarm equipment and gas fire extinguishing equipment.
1. Manually start the experiment
2, automatic start test.
electric fire temperature detectors
Temperature measuring electrical fire monitoring detector can detect the change of temperature parameters in the protected line, and can monitor the abnormal temperature of the line or connection point.
The detector shall be installed in the key heating parts of the cable connector terminal.
Temperature measuring electrical fire monitoring and detection includes signal processing unit and temperature measuring sensor.
independent electric fire detection system
The independent electric fire monitoring detector has the function of monitoring and alarm, the detector sends out sound and light alarm signal when alarm, and displays the alarm value, which can be used independently.
When there is no fire control room and the number of electrical fire monitoring detectors is not more than 8, independent electrical fire monitoring detectors can be used.
Each signal processing unit of the independent electrical fire monitoring detector can equip up to 4 sensors.
When the automatic fire alarm system is provided, the alarm information and fault information of the independent electrical fire monitoring detector shall be displayed on the graphic display device of the fire control room or the centralized fire alarm controller.
fire alarm linkage smoke exhaust
The alarm linkage control of smoke control system refers to the alarm linkage control of mechanical smoke control system.
According to the different parts of the setting, the mechanical pressurized air supply system can be divided into the mechanical pressurized air supply system in the stairwell and front room, the mechanical pressurized air supply system in the refuge layer and the mechanical pressurized air supply system in the refuge aisle.
Mechanical pressurized air supply system in the stairwell and front room:
Linkage control should be divided according to fire protection zones, including automatic, manual, chain start and other control methods.
linkage fire alarm system parts
Fire alarm controller and fire linkage controller are integrated products, called the linked fire alarm controller.
The main components of the linked fire alarm controller include motherboard, display board, bus linkage control panel, multi-line linkage control panel, network interface component， power supply, loop board and so on.
Recommended
wireless fire alarm installation and debugging procedures.pdf
Professional wireless fire alarm and fire linkage security system.
It is easy to install without wiring.
It is easy to program with free PC software.
It is professional security fire alarm and automatical fire fighting with loop linkage and direct linkage with smoke exhaust, electric fan, hydrant etc.
Complete wireless fire alarm system at vedardsecurity.com
linkage of gas fire extinguishing system with fire alarm
Gas fire extinguishing device and foam fire extinguishing device usually adopt independent fire extinguishing controller. When the fire detector in its protected area is directly connected to the fire extinguishing controller, the alarm linkage control of each stage and the feedback signal of the system shall be immediately fed back to the fire extinguishing linkage controller, and the fire extinguishing linkage controller shall start the alarm linkage control process according to the specification requirements.
After the fire linkage controller receives the feedback signal, is it necessary to activate all the fire audible and visual alarms and fire broadcasting in the building? Is it necessary to turn on the smoke control and exhaust system and the emergency lighting evacuation indicator system?
Fire alarm and gas extinguishing system instruction
Gas fire extinguishing control system is mainly composed of gas fire extinguishing controller, fire detectors, manual /automatic switch, emergency start/stop button, sound/light alarm, gas spraying indicator light, etc.
Among them, Generally, smoke detectors and heat detectors are used as fire detectors.
Manual alarm button or other types of fire detectors can also be used in special cases.
Gas extinguishing controller linkage control gas fire extinguishing equipment, linkage control fan, Air valve fire valve, Ventilation and air conditioning, Automatic doors and Windows and other equipment. And receive feedback signals.
test of gas fire extinguishing system
The gas fire extinguishing system project requires the implementation of simulated start-up tests to verify the reliability of the gas fire extinguishing system. The simulated start test shall be carried out after the installation and debugging of gas equipment, alarm equipment and gas fire extinguishing equipment.
1. Manually start the experiment
2, automatic start test.
electric fire temperature detectors
Temperature measuring electrical fire monitoring detector can detect the change of temperature parameters in the protected line, and can monitor the abnormal temperature of the line or connection point.
The detector shall be installed in the key heating parts of the cable connector terminal.
Temperature measuring electrical fire monitoring and detection includes signal processing unit and temperature measuring sensor.
independent electric fire detection system
The independent electric fire monitoring detector has the function of monitoring and alarm, the detector sends out sound and light alarm signal when alarm, and displays the alarm value, which can be used independently.
When there is no fire control room and the number of electrical fire monitoring detectors is not more than 8, independent electrical fire monitoring detectors can be used.
Each signal processing unit of the independent electrical fire monitoring detector can equip up to 4 sensors.
When the automatic fire alarm system is provided, the alarm information and fault information of the independent electrical fire monitoring detector shall be displayed on the graphic display device of the fire control room or the centralized fire alarm controller.
fire alarm linkage smoke exhaust
The alarm linkage control of smoke control system refers to the alarm linkage control of mechanical smoke control system.
According to the different parts of the setting, the mechanical pressurized air supply system can be divided into the mechanical pressurized air supply system in the stairwell and front room, the mechanical pressurized air supply system in the refuge layer and the mechanical pressurized air supply system in the refuge aisle.
Mechanical pressurized air supply system in the stairwell and front room:
Linkage control should be divided according to fire protection zones, including automatic, manual, chain start and other control methods.
linkage fire alarm system parts
Fire alarm controller and fire linkage controller are integrated products, called the linked fire alarm controller.
The main components of the linked fire alarm controller include motherboard, display board, bus linkage control panel, multi-line linkage control panel, network interface component， power supply, loop board and so on.
addressable fire alarm system loop
Most fire alarm systems adopt two bus system.
Two bus is a bus technology that combines power supply line and signal line. Two buses save construction and cable costs, greatly facilitating on-site construction and later maintenance.
addressable fire alarm system bus loop
There are two main types of bus systems - tree bus and ring bus. Tree bus has a unidirectional loop that means equipment behind a fault cannot operate, while ring bus forms a closed loop so a single fault does not affect the whole system. Both require bus isolators to isolate faults without disrupting other equipment. The total number of devices protected by each isolator should not exceed 32. Isolators automatically reintegrate isolated sections once faults are repaired.
fire alarm system types
The design of the regional fire alarm system shall comply with the following requirements:
1. The system shall consist of fire detector, manual fire alarm button, fire audible and visual alarm and fire alarm controller.
2. The system may include a graphic display device in the fire control room and an fire alarm displayer to indicate the fire floor.
3. The fire control room can not be set up for the regional fire alarm system, but the fire alarm controller should be set up in the place with people on duty.
4. When the system is equipped with the graphic display device in the fire control room, the graphic display device performs the functions of remote information transmission and remote query.
5. If no graphic display device is set in the system, fire alarm transmission device should be set. Similar functions are performed by fire alarm transmission equipment.
fire alarm system fire graphic display device
According to the specification requirements, the centralized alarm system and the control center alarm system need to be equipped with graphic display device (CRT system).
The graphic display device is installed in the fire control center, which is used to simulate the building plane layout of the fire trigger device and linkage device on site, and can truthfully reflect the fire, linkage condition and fault situation on site.
The graphic display device can display the general layout of the building, the building plan of each protected object, the system diagram, and the names and evacuation routes of each protected object and the main parts.
And can display automatic fire alarm and linkage control system and its control of all kinds of fire fighting equipment name, physical location and dynamic information of each fire fighting equipment.
overview of automatic fire-alarm systems
Automatic fire alarm system is the main part of fire control system.
Automatic fire alarm system includes fire early warning system, fire detection alarm and linkage control system.
The linkage control system includes fire hydrant button, fire alarm, various input and output modules, fire appliance control device, fire broadcasting system, fire telephone system, graphic display device, emergency lighting, evacuation indicating system, etc.
Fire early warning system is an independent subsystem of automatic fire alarm system. It mainly includes combustible gas detection and alarm system and electrical fire monitoring system.
Combustible gas detection and alarm system is mainly used in the use, production of combustible gas or combustible steam places.
addressable fire alarm bus short circuit isolator
Bus short circuit isolator is simply called bus isolator.
It is necessary to install bus short circuit isolator in bus automatic fire alarm system. When a bus fails, the bus isolator automatically separates the faulty bus part from the whole system to ensure the normal operation of the rest of the system.
At the same time, the fire alarm controller indicates the part number of the isolated parts, which is convenient for maintenance.
When the fault is rectified, the bus isolator automatically reintegrates the isolated part into the system.
fire manual call and hydrant button
Manual fire alarm button is a manual fire alarm device.
After the alarm button is pressed, the alarm signal is sent to the fire alarm controller through the bus loop.
The controller displays the position, code and annotation information of the alarm button, and sends out sound and light alarm signal.
The alarm button should be set with a red start confirmation light. After pressing the alarm button, the start confirmation light should be lit and kept until the alarm state is reset.
addressable fire alarm system input module
The input module, also known as the monitoring module, is used to receive the action signal of the monitored device and can be connected to the monitored device with normally open or normally closed signal output.
The input module adds an address code to the action signal of the monitored device, and transmits it to the fire alarm controller through the signal bus to issue an alarm signal or linkage trigger signal.
The input module can be equipped with all kinds of equipment that need feedback signals on the site, such as water flow indicator, pressure switch, signal valve control cabinet, and all kinds of external linkage equipment that can provide switch signals.
carbon monoxide detection system
According to the code, carbon monoxide detectors should be installed in places where carbon monoxide leakage is possible.
For the choice of carbon monoxide detector, you may have the following questions:
Carbon monoxide is both a combustible gas and a toxic gas，should I choose a carbon monoxide detector or a combustible gas detector?
More details can be found at https://www.vedardsecurity.com
gas fire extinguish system
The gas fire extinguishing control system mainly consists of gas fire extinguishing controller, fire detector, manual automatic switch, emergency start and stop button, sound and light alarm, gas spraying indicator light and so on.
The fire detector generally adopts smoke fire detector and temperature fire detector. In special cases, manual alarm buttons or other types of fire detectors can also be used.
Gas fire extinguishing controller linkage control gas fire extinguishing equipment, linkage control fan, air valve, fire valve, ventilation and air conditioning, automatic doors and windows and other equipment, and receive feedback signals.
More professional fire alarm system instruction can be found at https://www.vedardsecurity.com
Residual current electrical fire detector
Residual current electrical fire detector is used to monitor the change of residual current value in the protected line.
When the residual current in the protected electrical line exceeds the alarm set value, it can send alarm and control signals.
It is generally composed of residual current sensor and signal processing unit.
Read more instruction of fire alarm systems from Vedard Security Alarm Technology at https://www.vedardsecurity.com
Linear infrared beam smoke detector
Relative to the point type smoke detector, Linear light beam smoke detector is suitable for large Spaces without shelter Or a room with special requirements.
Linear beam smoke detectors usually include a transmitter and a receiver.
An infrared detection optical path is formed between the transmitter and the receiver.
When the smoke rises the beam is blocked and the beam received by the receiver is weakened.
When the reduction rate reaches the preset value, The detector will send out a fire alarm signal.
Vedard Security alarm technology company is specialized in burglar and alarm system suppy with free technical support with forum support at https://www.vedard.com/forum
Security service equipment integrated CCTV and burglar fire alarm
How to build up security service center easy？With the integrated security equipment, the security monitoring center with more than 10000 users can be built up and managed easy. There is free CMS for security management and security monitoring. From the windows browser, the system can be accesed to remote configure or monitoring. There are local network management PC software to manage local security service systems and internet network PC software to manage all security systems. The secucirty manager can assign the authority and device to identified users.
FC-7664PRO alarm panel professional security system
Professional security system with free CMS. FC-7664pro commercial security burglar and fire alarm control panel with wired wireless zones. It works with motion sensor, smoke detector, emergency button, manual call point, siren strobe.
The alarm center has Programmable output port to link with NVR, electric door and it can connect programmable relay module to enable or disable more equipment.
MC-800DMT intrusion detector manual
MC-800DMT is professional false alarm free motion sensor for home security. It adopts advanced intelligent analysis technology with high reliable and accurate features.
Motion sensor is used to detect illegal intrusion. It should be installed in living room, bed rooms, or balcony.
It is infrared detector with interference resistance feature. It sends alarm to alarm center and can link with security camera to send photo of spot.
Vedard Security is professional supplier of fire and burglar alarm systems with free technical support at https://www.vedard.com/forum
PB-503R Wireless alarm keypad
Wireless alarm keypad is part of home or business security system. It is used to configure and monitor the alarm system.
It works with Focus professional meian tech security alarm control panel such as HA-VGT, FC-7664pro. It can inquiry the system status and receive alarm information.
Shop professional burglar and fire alarm systems at https://vedardalarm.com
Fire Alarm input module
The input module, also known as the monitoring module, is used to receive the action signal of the monitored device and can be connected to the monitored device with normally open or normally closed signal output.
The input module adds an address code to the action signal of the monitored device, and transmits it to the fire alarm controller through the signal bus to issue an alarm signal or linkage trigger signal.
Residual current electrical fire detector
Residual current electrical fire detector is used to monitor the change of residual current value in the protected line.
When the residual current in the protected electrical line exceeds the alarm set value, it can send alarm and control signals.
It is generally composed of residual current sensor and signal processing unit.
gas fire extinguishing control system
The gas fire extinguishing control system mainly consists of gas fire extinguishing controller, fire detector, manual automatic switch, emergency start and stop button, sound and light alarm, gas spraying indicator light and so on.
The fire detector generally adopts smoke fire detector and temperature fire detector. In special cases, manual alarm buttons or other types of fire detectors can also be used.
Gas fire extinguishing controller linkage control gas fire extinguishing equipment, linkage control fan, air valve, fire valve, ventilation and air conditioning, automatic doors and windows and other equipment, and receive feedback signals.
gas fire extinguishing system instruction
How does the gas fire extinguishing system work and how to install it and use it? Where is it installed and why does it have to be installed? Whether the gas sparyed by fire fighting is harmful to human body and equipment? The gas fire extinguishing system should be installed in library, computer room, warehouse to protect equipment and property when fire occurs. But the gas sprayed is harmful for human body. So, there are two step to start gas extinguishing and 3 ways to start it. Shop fire alarm and fire fighting system at https://www.vedardsecurity.com
Fire alarm and fire automatically extinguishing system consists of various fire detectors include smoke detector, heat detector, manual call point, break glass and gas extinguishing system, gas release start button, gas release indicator. The gas release will be started by automatic mode, manual mode or mechanical mode according to on site situation. And it will be started after smoke detector triggers alarm and heat detector or manual call point triggers fire alarm. The gas fire extinguishing system can be connected with central fire alarm monitor panel installed in fire security room. After fire alarm triggers, the central fire alarm monitor will trigger alarm.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
More Related Content
More from Vedard Security Alarm System Store
addressable fire alarm system loop
Most fire alarm systems adopt two bus system.
Two bus is a bus technology that combines power supply line and signal line. Two buses save construction and cable costs, greatly facilitating on-site construction and later maintenance.
addressable fire alarm system bus loop
There are two main types of bus systems - tree bus and ring bus. Tree bus has a unidirectional loop that means equipment behind a fault cannot operate, while ring bus forms a closed loop so a single fault does not affect the whole system. Both require bus isolators to isolate faults without disrupting other equipment. The total number of devices protected by each isolator should not exceed 32. Isolators automatically reintegrate isolated sections once faults are repaired.
fire alarm system types
The design of the regional fire alarm system shall comply with the following requirements:
1. The system shall consist of fire detector, manual fire alarm button, fire audible and visual alarm and fire alarm controller.
2. The system may include a graphic display device in the fire control room and an fire alarm displayer to indicate the fire floor.
3. The fire control room can not be set up for the regional fire alarm system, but the fire alarm controller should be set up in the place with people on duty.
4. When the system is equipped with the graphic display device in the fire control room, the graphic display device performs the functions of remote information transmission and remote query.
5. If no graphic display device is set in the system, fire alarm transmission device should be set. Similar functions are performed by fire alarm transmission equipment.
fire alarm system fire graphic display device
According to the specification requirements, the centralized alarm system and the control center alarm system need to be equipped with graphic display device (CRT system).
The graphic display device is installed in the fire control center, which is used to simulate the building plane layout of the fire trigger device and linkage device on site, and can truthfully reflect the fire, linkage condition and fault situation on site.
The graphic display device can display the general layout of the building, the building plan of each protected object, the system diagram, and the names and evacuation routes of each protected object and the main parts.
And can display automatic fire alarm and linkage control system and its control of all kinds of fire fighting equipment name, physical location and dynamic information of each fire fighting equipment.
overview of automatic fire-alarm systems
Automatic fire alarm system is the main part of fire control system.
Automatic fire alarm system includes fire early warning system, fire detection alarm and linkage control system.
The linkage control system includes fire hydrant button, fire alarm, various input and output modules, fire appliance control device, fire broadcasting system, fire telephone system, graphic display device, emergency lighting, evacuation indicating system, etc.
Fire early warning system is an independent subsystem of automatic fire alarm system. It mainly includes combustible gas detection and alarm system and electrical fire monitoring system.
Combustible gas detection and alarm system is mainly used in the use, production of combustible gas or combustible steam places.
addressable fire alarm bus short circuit isolator
Bus short circuit isolator is simply called bus isolator.
It is necessary to install bus short circuit isolator in bus automatic fire alarm system. When a bus fails, the bus isolator automatically separates the faulty bus part from the whole system to ensure the normal operation of the rest of the system.
At the same time, the fire alarm controller indicates the part number of the isolated parts, which is convenient for maintenance.
When the fault is rectified, the bus isolator automatically reintegrates the isolated part into the system.
fire manual call and hydrant button
Manual fire alarm button is a manual fire alarm device.
After the alarm button is pressed, the alarm signal is sent to the fire alarm controller through the bus loop.
The controller displays the position, code and annotation information of the alarm button, and sends out sound and light alarm signal.
The alarm button should be set with a red start confirmation light. After pressing the alarm button, the start confirmation light should be lit and kept until the alarm state is reset.
addressable fire alarm system input module
The input module, also known as the monitoring module, is used to receive the action signal of the monitored device and can be connected to the monitored device with normally open or normally closed signal output.
The input module adds an address code to the action signal of the monitored device, and transmits it to the fire alarm controller through the signal bus to issue an alarm signal or linkage trigger signal.
The input module can be equipped with all kinds of equipment that need feedback signals on the site, such as water flow indicator, pressure switch, signal valve control cabinet, and all kinds of external linkage equipment that can provide switch signals.
carbon monoxide detection system
According to the code, carbon monoxide detectors should be installed in places where carbon monoxide leakage is possible.
For the choice of carbon monoxide detector, you may have the following questions:
Carbon monoxide is both a combustible gas and a toxic gas，should I choose a carbon monoxide detector or a combustible gas detector?
More details can be found at https://www.vedardsecurity.com
gas fire extinguish system
The gas fire extinguishing control system mainly consists of gas fire extinguishing controller, fire detector, manual automatic switch, emergency start and stop button, sound and light alarm, gas spraying indicator light and so on.
The fire detector generally adopts smoke fire detector and temperature fire detector. In special cases, manual alarm buttons or other types of fire detectors can also be used.
Gas fire extinguishing controller linkage control gas fire extinguishing equipment, linkage control fan, air valve, fire valve, ventilation and air conditioning, automatic doors and windows and other equipment, and receive feedback signals.
More professional fire alarm system instruction can be found at https://www.vedardsecurity.com
Residual current electrical fire detector
Residual current electrical fire detector is used to monitor the change of residual current value in the protected line.
When the residual current in the protected electrical line exceeds the alarm set value, it can send alarm and control signals.
It is generally composed of residual current sensor and signal processing unit.
Read more instruction of fire alarm systems from Vedard Security Alarm Technology at https://www.vedardsecurity.com
Linear infrared beam smoke detector
Relative to the point type smoke detector, Linear light beam smoke detector is suitable for large Spaces without shelter Or a room with special requirements.
Linear beam smoke detectors usually include a transmitter and a receiver.
An infrared detection optical path is formed between the transmitter and the receiver.
When the smoke rises the beam is blocked and the beam received by the receiver is weakened.
When the reduction rate reaches the preset value, The detector will send out a fire alarm signal.
Vedard Security alarm technology company is specialized in burglar and alarm system suppy with free technical support with forum support at https://www.vedard.com/forum
Security service equipment integrated CCTV and burglar fire alarm
How to build up security service center easy？With the integrated security equipment, the security monitoring center with more than 10000 users can be built up and managed easy. There is free CMS for security management and security monitoring. From the windows browser, the system can be accesed to remote configure or monitoring. There are local network management PC software to manage local security service systems and internet network PC software to manage all security systems. The secucirty manager can assign the authority and device to identified users.
FC-7664PRO alarm panel professional security system
Professional security system with free CMS. FC-7664pro commercial security burglar and fire alarm control panel with wired wireless zones. It works with motion sensor, smoke detector, emergency button, manual call point, siren strobe.
The alarm center has Programmable output port to link with NVR, electric door and it can connect programmable relay module to enable or disable more equipment.
MC-800DMT intrusion detector manual
MC-800DMT is professional false alarm free motion sensor for home security. It adopts advanced intelligent analysis technology with high reliable and accurate features.
Motion sensor is used to detect illegal intrusion. It should be installed in living room, bed rooms, or balcony.
It is infrared detector with interference resistance feature. It sends alarm to alarm center and can link with security camera to send photo of spot.
Vedard Security is professional supplier of fire and burglar alarm systems with free technical support at https://www.vedard.com/forum
PB-503R Wireless alarm keypad
Wireless alarm keypad is part of home or business security system. It is used to configure and monitor the alarm system.
It works with Focus professional meian tech security alarm control panel such as HA-VGT, FC-7664pro. It can inquiry the system status and receive alarm information.
Shop professional burglar and fire alarm systems at https://vedardalarm.com
Fire Alarm input module
The input module, also known as the monitoring module, is used to receive the action signal of the monitored device and can be connected to the monitored device with normally open or normally closed signal output.
The input module adds an address code to the action signal of the monitored device, and transmits it to the fire alarm controller through the signal bus to issue an alarm signal or linkage trigger signal.
Residual current electrical fire detector
Residual current electrical fire detector is used to monitor the change of residual current value in the protected line.
When the residual current in the protected electrical line exceeds the alarm set value, it can send alarm and control signals.
It is generally composed of residual current sensor and signal processing unit.
gas fire extinguishing control system
The gas fire extinguishing control system mainly consists of gas fire extinguishing controller, fire detector, manual automatic switch, emergency start and stop button, sound and light alarm, gas spraying indicator light and so on.
The fire detector generally adopts smoke fire detector and temperature fire detector. In special cases, manual alarm buttons or other types of fire detectors can also be used.
Gas fire extinguishing controller linkage control gas fire extinguishing equipment, linkage control fan, air valve, fire valve, ventilation and air conditioning, automatic doors and windows and other equipment, and receive feedback signals.
gas fire extinguishing system instruction
How does the gas fire extinguishing system work and how to install it and use it? Where is it installed and why does it have to be installed? Whether the gas sparyed by fire fighting is harmful to human body and equipment? The gas fire extinguishing system should be installed in library, computer room, warehouse to protect equipment and property when fire occurs. But the gas sprayed is harmful for human body. So, there are two step to start gas extinguishing and 3 ways to start it. Shop fire alarm and fire fighting system at https://www.vedardsecurity.com
Fire alarm and fire automatically extinguishing system consists of various fire detectors include smoke detector, heat detector, manual call point, break glass and gas extinguishing system, gas release start button, gas release indicator. The gas release will be started by automatic mode, manual mode or mechanical mode according to on site situation. And it will be started after smoke detector triggers alarm and heat detector or manual call point triggers fire alarm. The gas fire extinguishing system can be connected with central fire alarm monitor panel installed in fire security room. After fire alarm triggers, the central fire alarm monitor will trigger alarm.
More from Vedard Security Alarm System Store (20)
Security service equipment integrated CCTV and burglar fire alarm
Security service equipment integrated CCTV and burglar fire alarm
FC-7664PRO alarm panel professional security system
FC-7664PRO alarm panel professional security system
Recently uploaded
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Recently uploaded (20)
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
An improved modulation technique suitable for a three level flying capacitor ...
An improved modulation technique suitable for a three level flying capacitor ...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
division of fire alarm areas
- 1. Alarm area is a unit that divides the warning range of automatic fire alarm system according to fire zone or floor. An alarm area includes a plurality of detection areas. The purpose of dividing the alarm area is to determine the location of the alarm and fire. At the same time, it is convenient to solve the problem of fire control system linkage design. The alarm area should be divided according to the fire zone or floor. You can also divide several adjacent fire zones or floors that need to be simultaneously linked with fire fighting equipment into an alarm area in case of fire. One fire display panel should be set up in each alarm area. When an ALARM AREA consists of more than one floor, a fire display panel should be installed on each floor showing the area display of the floor only. Fire display panel is used to display fire information in the fire zone of the floor, to facilitate identification and management. Sound and light fire alarms should be set evenly in each alarm area. An alarm area of a cable tunnel shall consist of a closed length interval. An alarm area shall not
- 2. exceed 3 contiguous closed length intervals. The alarm area of road tunnel should be determined according to the linkage of smoke exhaust system or fire extinguishing system. And should not exceed 150 meters The alarm area of the Class A, B and C liquid storage tank area shall consist of one storage tank area. Each external floating roof tank of 50,000 m3 or more shall be separately divided into an alarm area. The alarm area of the train should be divided by carriage. Each carriage shall be divided into an alarm area.