MC-800DMT intrusion detector manual
•
0 likes•23 views
MC-800DMT is professional false alarm free motion sensor for home security. It adopts advanced intelligent analysis technology with high reliable and accurate features. Motion sensor is used to detect illegal intrusion. It should be installed in living room, bed rooms, or balcony. It is infrared detector with interference resistance feature. It sends alarm to alarm center and can link with security camera to send photo of spot. Vedard Security is professional supplier of fire and burglar alarm systems with free technical support at https://www.vedard.com/forum
Report
Share
Report
Share
Download to read offline
Recommended
wireless fire alarm installation and debugging procedures.pdf
Professional wireless fire alarm and fire linkage security system.
It is easy to install without wiring.
It is easy to program with free PC software.
It is professional security fire alarm and automatical fire fighting with loop linkage and direct linkage with smoke exhaust, electric fan, hydrant etc.
Complete wireless fire alarm system at vedardsecurity.com
linkage of gas fire extinguishing system with fire alarm
Gas fire extinguishing device and foam fire extinguishing device usually adopt independent fire extinguishing controller. When the fire detector in its protected area is directly connected to the fire extinguishing controller, the alarm linkage control of each stage and the feedback signal of the system shall be immediately fed back to the fire extinguishing linkage controller, and the fire extinguishing linkage controller shall start the alarm linkage control process according to the specification requirements.
After the fire linkage controller receives the feedback signal, is it necessary to activate all the fire audible and visual alarms and fire broadcasting in the building? Is it necessary to turn on the smoke control and exhaust system and the emergency lighting evacuation indicator system?
Fire alarm and gas extinguishing system instruction
Gas fire extinguishing control system is mainly composed of gas fire extinguishing controller, fire detectors, manual /automatic switch, emergency start/stop button, sound/light alarm, gas spraying indicator light, etc.
Among them, Generally, smoke detectors and heat detectors are used as fire detectors.
Manual alarm button or other types of fire detectors can also be used in special cases.
Gas extinguishing controller linkage control gas fire extinguishing equipment, linkage control fan, Air valve fire valve, Ventilation and air conditioning, Automatic doors and Windows and other equipment. And receive feedback signals.
test of gas fire extinguishing system
The gas fire extinguishing system project requires the implementation of simulated start-up tests to verify the reliability of the gas fire extinguishing system. The simulated start test shall be carried out after the installation and debugging of gas equipment, alarm equipment and gas fire extinguishing equipment.
1. Manually start the experiment
2, automatic start test.
electric fire temperature detectors
Temperature measuring electrical fire monitoring detector can detect the change of temperature parameters in the protected line, and can monitor the abnormal temperature of the line or connection point.
The detector shall be installed in the key heating parts of the cable connector terminal.
Temperature measuring electrical fire monitoring and detection includes signal processing unit and temperature measuring sensor.
independent electric fire detection system
The independent electric fire monitoring detector has the function of monitoring and alarm, the detector sends out sound and light alarm signal when alarm, and displays the alarm value, which can be used independently.
When there is no fire control room and the number of electrical fire monitoring detectors is not more than 8, independent electrical fire monitoring detectors can be used.
Each signal processing unit of the independent electrical fire monitoring detector can equip up to 4 sensors.
When the automatic fire alarm system is provided, the alarm information and fault information of the independent electrical fire monitoring detector shall be displayed on the graphic display device of the fire control room or the centralized fire alarm controller.
fire alarm linkage smoke exhaust
The alarm linkage control of smoke control system refers to the alarm linkage control of mechanical smoke control system.
According to the different parts of the setting, the mechanical pressurized air supply system can be divided into the mechanical pressurized air supply system in the stairwell and front room, the mechanical pressurized air supply system in the refuge layer and the mechanical pressurized air supply system in the refuge aisle.
Mechanical pressurized air supply system in the stairwell and front room:
Linkage control should be divided according to fire protection zones, including automatic, manual, chain start and other control methods.
linkage fire alarm system parts
Fire alarm controller and fire linkage controller are integrated products, called the linked fire alarm controller.
The main components of the linked fire alarm controller include motherboard, display board, bus linkage control panel, multi-line linkage control panel, network interface component， power supply, loop board and so on.
Recommended
wireless fire alarm installation and debugging procedures.pdf
Professional wireless fire alarm and fire linkage security system.
It is easy to install without wiring.
It is easy to program with free PC software.
It is professional security fire alarm and automatical fire fighting with loop linkage and direct linkage with smoke exhaust, electric fan, hydrant etc.
Complete wireless fire alarm system at vedardsecurity.com
linkage of gas fire extinguishing system with fire alarm
Gas fire extinguishing device and foam fire extinguishing device usually adopt independent fire extinguishing controller. When the fire detector in its protected area is directly connected to the fire extinguishing controller, the alarm linkage control of each stage and the feedback signal of the system shall be immediately fed back to the fire extinguishing linkage controller, and the fire extinguishing linkage controller shall start the alarm linkage control process according to the specification requirements.
After the fire linkage controller receives the feedback signal, is it necessary to activate all the fire audible and visual alarms and fire broadcasting in the building? Is it necessary to turn on the smoke control and exhaust system and the emergency lighting evacuation indicator system?
Fire alarm and gas extinguishing system instruction
Gas fire extinguishing control system is mainly composed of gas fire extinguishing controller, fire detectors, manual /automatic switch, emergency start/stop button, sound/light alarm, gas spraying indicator light, etc.
Among them, Generally, smoke detectors and heat detectors are used as fire detectors.
Manual alarm button or other types of fire detectors can also be used in special cases.
Gas extinguishing controller linkage control gas fire extinguishing equipment, linkage control fan, Air valve fire valve, Ventilation and air conditioning, Automatic doors and Windows and other equipment. And receive feedback signals.
test of gas fire extinguishing system
The gas fire extinguishing system project requires the implementation of simulated start-up tests to verify the reliability of the gas fire extinguishing system. The simulated start test shall be carried out after the installation and debugging of gas equipment, alarm equipment and gas fire extinguishing equipment.
1. Manually start the experiment
2, automatic start test.
electric fire temperature detectors
Temperature measuring electrical fire monitoring detector can detect the change of temperature parameters in the protected line, and can monitor the abnormal temperature of the line or connection point.
The detector shall be installed in the key heating parts of the cable connector terminal.
Temperature measuring electrical fire monitoring and detection includes signal processing unit and temperature measuring sensor.
independent electric fire detection system
The independent electric fire monitoring detector has the function of monitoring and alarm, the detector sends out sound and light alarm signal when alarm, and displays the alarm value, which can be used independently.
When there is no fire control room and the number of electrical fire monitoring detectors is not more than 8, independent electrical fire monitoring detectors can be used.
Each signal processing unit of the independent electrical fire monitoring detector can equip up to 4 sensors.
When the automatic fire alarm system is provided, the alarm information and fault information of the independent electrical fire monitoring detector shall be displayed on the graphic display device of the fire control room or the centralized fire alarm controller.
fire alarm linkage smoke exhaust
The alarm linkage control of smoke control system refers to the alarm linkage control of mechanical smoke control system.
According to the different parts of the setting, the mechanical pressurized air supply system can be divided into the mechanical pressurized air supply system in the stairwell and front room, the mechanical pressurized air supply system in the refuge layer and the mechanical pressurized air supply system in the refuge aisle.
Mechanical pressurized air supply system in the stairwell and front room:
Linkage control should be divided according to fire protection zones, including automatic, manual, chain start and other control methods.
linkage fire alarm system parts
Fire alarm controller and fire linkage controller are integrated products, called the linked fire alarm controller.
The main components of the linked fire alarm controller include motherboard, display board, bus linkage control panel, multi-line linkage control panel, network interface component， power supply, loop board and so on.
addressable fire alarm system loop
Most fire alarm systems adopt two bus system.
Two bus is a bus technology that combines power supply line and signal line. Two buses save construction and cable costs, greatly facilitating on-site construction and later maintenance.
addressable fire alarm system bus loop
There are two main types of bus systems - tree bus and ring bus. Tree bus has a unidirectional loop that means equipment behind a fault cannot operate, while ring bus forms a closed loop so a single fault does not affect the whole system. Both require bus isolators to isolate faults without disrupting other equipment. The total number of devices protected by each isolator should not exceed 32. Isolators automatically reintegrate isolated sections once faults are repaired.
fire alarm system types
The design of the regional fire alarm system shall comply with the following requirements:
1. The system shall consist of fire detector, manual fire alarm button, fire audible and visual alarm and fire alarm controller.
2. The system may include a graphic display device in the fire control room and an fire alarm displayer to indicate the fire floor.
3. The fire control room can not be set up for the regional fire alarm system, but the fire alarm controller should be set up in the place with people on duty.
4. When the system is equipped with the graphic display device in the fire control room, the graphic display device performs the functions of remote information transmission and remote query.
5. If no graphic display device is set in the system, fire alarm transmission device should be set. Similar functions are performed by fire alarm transmission equipment.
fire alarm system fire graphic display device
According to the specification requirements, the centralized alarm system and the control center alarm system need to be equipped with graphic display device (CRT system).
The graphic display device is installed in the fire control center, which is used to simulate the building plane layout of the fire trigger device and linkage device on site, and can truthfully reflect the fire, linkage condition and fault situation on site.
The graphic display device can display the general layout of the building, the building plan of each protected object, the system diagram, and the names and evacuation routes of each protected object and the main parts.
And can display automatic fire alarm and linkage control system and its control of all kinds of fire fighting equipment name, physical location and dynamic information of each fire fighting equipment.
overview of automatic fire-alarm systems
Automatic fire alarm system is the main part of fire control system.
Automatic fire alarm system includes fire early warning system, fire detection alarm and linkage control system.
The linkage control system includes fire hydrant button, fire alarm, various input and output modules, fire appliance control device, fire broadcasting system, fire telephone system, graphic display device, emergency lighting, evacuation indicating system, etc.
Fire early warning system is an independent subsystem of automatic fire alarm system. It mainly includes combustible gas detection and alarm system and electrical fire monitoring system.
Combustible gas detection and alarm system is mainly used in the use, production of combustible gas or combustible steam places.
division of fire alarm areas
Alarm area is a unit that divides the warning range of automatic fire alarm system according to fire zone or floor. An alarm area includes a plurality of detection areas.
The purpose of dividing the alarm area is to determine the location of the alarm and fire. At the same time, it is convenient to solve the problem of fire control system linkage design.
The alarm area should be divided according to the fire zone or floor. You can also divide several adjacent fire zones or floors that need to be simultaneously linked with fire fighting equipment into an alarm area in case of fire.
addressable fire alarm bus short circuit isolator
Bus short circuit isolator is simply called bus isolator.
It is necessary to install bus short circuit isolator in bus automatic fire alarm system. When a bus fails, the bus isolator automatically separates the faulty bus part from the whole system to ensure the normal operation of the rest of the system.
At the same time, the fire alarm controller indicates the part number of the isolated parts, which is convenient for maintenance.
When the fault is rectified, the bus isolator automatically reintegrates the isolated part into the system.
fire manual call and hydrant button
Manual fire alarm button is a manual fire alarm device.
After the alarm button is pressed, the alarm signal is sent to the fire alarm controller through the bus loop.
The controller displays the position, code and annotation information of the alarm button, and sends out sound and light alarm signal.
The alarm button should be set with a red start confirmation light. After pressing the alarm button, the start confirmation light should be lit and kept until the alarm state is reset.
addressable fire alarm system input module
The input module, also known as the monitoring module, is used to receive the action signal of the monitored device and can be connected to the monitored device with normally open or normally closed signal output.
The input module adds an address code to the action signal of the monitored device, and transmits it to the fire alarm controller through the signal bus to issue an alarm signal or linkage trigger signal.
The input module can be equipped with all kinds of equipment that need feedback signals on the site, such as water flow indicator, pressure switch, signal valve control cabinet, and all kinds of external linkage equipment that can provide switch signals.
carbon monoxide detection system
According to the code, carbon monoxide detectors should be installed in places where carbon monoxide leakage is possible.
For the choice of carbon monoxide detector, you may have the following questions:
Carbon monoxide is both a combustible gas and a toxic gas，should I choose a carbon monoxide detector or a combustible gas detector?
More details can be found at https://www.vedardsecurity.com
gas fire extinguish system
The gas fire extinguishing control system mainly consists of gas fire extinguishing controller, fire detector, manual automatic switch, emergency start and stop button, sound and light alarm, gas spraying indicator light and so on.
The fire detector generally adopts smoke fire detector and temperature fire detector. In special cases, manual alarm buttons or other types of fire detectors can also be used.
Gas fire extinguishing controller linkage control gas fire extinguishing equipment, linkage control fan, air valve, fire valve, ventilation and air conditioning, automatic doors and windows and other equipment, and receive feedback signals.
More professional fire alarm system instruction can be found at https://www.vedardsecurity.com
Residual current electrical fire detector
Residual current electrical fire detector is used to monitor the change of residual current value in the protected line.
When the residual current in the protected electrical line exceeds the alarm set value, it can send alarm and control signals.
It is generally composed of residual current sensor and signal processing unit.
Read more instruction of fire alarm systems from Vedard Security Alarm Technology at https://www.vedardsecurity.com
Linear infrared beam smoke detector
Relative to the point type smoke detector, Linear light beam smoke detector is suitable for large Spaces without shelter Or a room with special requirements.
Linear beam smoke detectors usually include a transmitter and a receiver.
An infrared detection optical path is formed between the transmitter and the receiver.
When the smoke rises the beam is blocked and the beam received by the receiver is weakened.
When the reduction rate reaches the preset value, The detector will send out a fire alarm signal.
Vedard Security alarm technology company is specialized in burglar and alarm system suppy with free technical support with forum support at https://www.vedard.com/forum
Security service equipment integrated CCTV and burglar fire alarm
How to build up security service center easy？With the integrated security equipment, the security monitoring center with more than 10000 users can be built up and managed easy. There is free CMS for security management and security monitoring. From the windows browser, the system can be accesed to remote configure or monitoring. There are local network management PC software to manage local security service systems and internet network PC software to manage all security systems. The secucirty manager can assign the authority and device to identified users.
FC-7664PRO alarm panel professional security system
Professional security system with free CMS. FC-7664pro commercial security burglar and fire alarm control panel with wired wireless zones. It works with motion sensor, smoke detector, emergency button, manual call point, siren strobe.
The alarm center has Programmable output port to link with NVR, electric door and it can connect programmable relay module to enable or disable more equipment.
PB-503R Wireless alarm keypad
Wireless alarm keypad is part of home or business security system. It is used to configure and monitor the alarm system.
It works with Focus professional meian tech security alarm control panel such as HA-VGT, FC-7664pro. It can inquiry the system status and receive alarm information.
Shop professional burglar and fire alarm systems at https://vedardalarm.com
Fire Alarm input module
The input module, also known as the monitoring module, is used to receive the action signal of the monitored device and can be connected to the monitored device with normally open or normally closed signal output.
The input module adds an address code to the action signal of the monitored device, and transmits it to the fire alarm controller through the signal bus to issue an alarm signal or linkage trigger signal.
Residual current electrical fire detector
Residual current electrical fire detector is used to monitor the change of residual current value in the protected line.
When the residual current in the protected electrical line exceeds the alarm set value, it can send alarm and control signals.
It is generally composed of residual current sensor and signal processing unit.
gas fire extinguishing control system
The gas fire extinguishing control system mainly consists of gas fire extinguishing controller, fire detector, manual automatic switch, emergency start and stop button, sound and light alarm, gas spraying indicator light and so on.
The fire detector generally adopts smoke fire detector and temperature fire detector. In special cases, manual alarm buttons or other types of fire detectors can also be used.
Gas fire extinguishing controller linkage control gas fire extinguishing equipment, linkage control fan, air valve, fire valve, ventilation and air conditioning, automatic doors and windows and other equipment, and receive feedback signals.
gas fire extinguishing system instruction
How does the gas fire extinguishing system work and how to install it and use it? Where is it installed and why does it have to be installed? Whether the gas sparyed by fire fighting is harmful to human body and equipment? The gas fire extinguishing system should be installed in library, computer room, warehouse to protect equipment and property when fire occurs. But the gas sprayed is harmful for human body. So, there are two step to start gas extinguishing and 3 ways to start it. Shop fire alarm and fire fighting system at https://www.vedardsecurity.com
Fire alarm and fire automatically extinguishing system consists of various fire detectors include smoke detector, heat detector, manual call point, break glass and gas extinguishing system, gas release start button, gas release indicator. The gas release will be started by automatic mode, manual mode or mechanical mode according to on site situation. And it will be started after smoke detector triggers alarm and heat detector or manual call point triggers fire alarm. The gas fire extinguishing system can be connected with central fire alarm monitor panel installed in fire security room. After fire alarm triggers, the central fire alarm monitor will trigger alarm.
「進化するアプリ イマ×ミライ ～生成AIアプリへ続く道と新時代のアプリとは～」Interop24Tokyo APPS JAPAN B1-01講演
進化するアプリ イマ×ミライ
～生成AIアプリへ続く道と新時代のアプリとは～
2024/6/12～14まで幕張メッセで開催されました、インターロップ併設アプリジャパンの展示会場内ROOM Bで、10:30～11:10の枠で登壇させてもらいましたセッション資料を公開します。
More Related Content
More from Vedard Security Alarm System Store
addressable fire alarm system loop
Most fire alarm systems adopt two bus system.
Two bus is a bus technology that combines power supply line and signal line. Two buses save construction and cable costs, greatly facilitating on-site construction and later maintenance.
addressable fire alarm system bus loop
There are two main types of bus systems - tree bus and ring bus. Tree bus has a unidirectional loop that means equipment behind a fault cannot operate, while ring bus forms a closed loop so a single fault does not affect the whole system. Both require bus isolators to isolate faults without disrupting other equipment. The total number of devices protected by each isolator should not exceed 32. Isolators automatically reintegrate isolated sections once faults are repaired.
fire alarm system types
The design of the regional fire alarm system shall comply with the following requirements:
1. The system shall consist of fire detector, manual fire alarm button, fire audible and visual alarm and fire alarm controller.
2. The system may include a graphic display device in the fire control room and an fire alarm displayer to indicate the fire floor.
3. The fire control room can not be set up for the regional fire alarm system, but the fire alarm controller should be set up in the place with people on duty.
4. When the system is equipped with the graphic display device in the fire control room, the graphic display device performs the functions of remote information transmission and remote query.
5. If no graphic display device is set in the system, fire alarm transmission device should be set. Similar functions are performed by fire alarm transmission equipment.
fire alarm system fire graphic display device
According to the specification requirements, the centralized alarm system and the control center alarm system need to be equipped with graphic display device (CRT system).
The graphic display device is installed in the fire control center, which is used to simulate the building plane layout of the fire trigger device and linkage device on site, and can truthfully reflect the fire, linkage condition and fault situation on site.
The graphic display device can display the general layout of the building, the building plan of each protected object, the system diagram, and the names and evacuation routes of each protected object and the main parts.
And can display automatic fire alarm and linkage control system and its control of all kinds of fire fighting equipment name, physical location and dynamic information of each fire fighting equipment.
overview of automatic fire-alarm systems
Automatic fire alarm system is the main part of fire control system.
Automatic fire alarm system includes fire early warning system, fire detection alarm and linkage control system.
The linkage control system includes fire hydrant button, fire alarm, various input and output modules, fire appliance control device, fire broadcasting system, fire telephone system, graphic display device, emergency lighting, evacuation indicating system, etc.
Fire early warning system is an independent subsystem of automatic fire alarm system. It mainly includes combustible gas detection and alarm system and electrical fire monitoring system.
Combustible gas detection and alarm system is mainly used in the use, production of combustible gas or combustible steam places.
division of fire alarm areas
Alarm area is a unit that divides the warning range of automatic fire alarm system according to fire zone or floor. An alarm area includes a plurality of detection areas.
The purpose of dividing the alarm area is to determine the location of the alarm and fire. At the same time, it is convenient to solve the problem of fire control system linkage design.
The alarm area should be divided according to the fire zone or floor. You can also divide several adjacent fire zones or floors that need to be simultaneously linked with fire fighting equipment into an alarm area in case of fire.
addressable fire alarm bus short circuit isolator
Bus short circuit isolator is simply called bus isolator.
It is necessary to install bus short circuit isolator in bus automatic fire alarm system. When a bus fails, the bus isolator automatically separates the faulty bus part from the whole system to ensure the normal operation of the rest of the system.
At the same time, the fire alarm controller indicates the part number of the isolated parts, which is convenient for maintenance.
When the fault is rectified, the bus isolator automatically reintegrates the isolated part into the system.
fire manual call and hydrant button
Manual fire alarm button is a manual fire alarm device.
After the alarm button is pressed, the alarm signal is sent to the fire alarm controller through the bus loop.
The controller displays the position, code and annotation information of the alarm button, and sends out sound and light alarm signal.
The alarm button should be set with a red start confirmation light. After pressing the alarm button, the start confirmation light should be lit and kept until the alarm state is reset.
addressable fire alarm system input module
The input module, also known as the monitoring module, is used to receive the action signal of the monitored device and can be connected to the monitored device with normally open or normally closed signal output.
The input module adds an address code to the action signal of the monitored device, and transmits it to the fire alarm controller through the signal bus to issue an alarm signal or linkage trigger signal.
The input module can be equipped with all kinds of equipment that need feedback signals on the site, such as water flow indicator, pressure switch, signal valve control cabinet, and all kinds of external linkage equipment that can provide switch signals.
carbon monoxide detection system
According to the code, carbon monoxide detectors should be installed in places where carbon monoxide leakage is possible.
For the choice of carbon monoxide detector, you may have the following questions:
Carbon monoxide is both a combustible gas and a toxic gas，should I choose a carbon monoxide detector or a combustible gas detector?
More details can be found at https://www.vedardsecurity.com
gas fire extinguish system
The gas fire extinguishing control system mainly consists of gas fire extinguishing controller, fire detector, manual automatic switch, emergency start and stop button, sound and light alarm, gas spraying indicator light and so on.
The fire detector generally adopts smoke fire detector and temperature fire detector. In special cases, manual alarm buttons or other types of fire detectors can also be used.
Gas fire extinguishing controller linkage control gas fire extinguishing equipment, linkage control fan, air valve, fire valve, ventilation and air conditioning, automatic doors and windows and other equipment, and receive feedback signals.
More professional fire alarm system instruction can be found at https://www.vedardsecurity.com
Residual current electrical fire detector
Residual current electrical fire detector is used to monitor the change of residual current value in the protected line.
When the residual current in the protected electrical line exceeds the alarm set value, it can send alarm and control signals.
It is generally composed of residual current sensor and signal processing unit.
Read more instruction of fire alarm systems from Vedard Security Alarm Technology at https://www.vedardsecurity.com
Linear infrared beam smoke detector
Relative to the point type smoke detector, Linear light beam smoke detector is suitable for large Spaces without shelter Or a room with special requirements.
Linear beam smoke detectors usually include a transmitter and a receiver.
An infrared detection optical path is formed between the transmitter and the receiver.
When the smoke rises the beam is blocked and the beam received by the receiver is weakened.
When the reduction rate reaches the preset value, The detector will send out a fire alarm signal.
Vedard Security alarm technology company is specialized in burglar and alarm system suppy with free technical support with forum support at https://www.vedard.com/forum
Security service equipment integrated CCTV and burglar fire alarm
How to build up security service center easy？With the integrated security equipment, the security monitoring center with more than 10000 users can be built up and managed easy. There is free CMS for security management and security monitoring. From the windows browser, the system can be accesed to remote configure or monitoring. There are local network management PC software to manage local security service systems and internet network PC software to manage all security systems. The secucirty manager can assign the authority and device to identified users.
FC-7664PRO alarm panel professional security system
Professional security system with free CMS. FC-7664pro commercial security burglar and fire alarm control panel with wired wireless zones. It works with motion sensor, smoke detector, emergency button, manual call point, siren strobe.
The alarm center has Programmable output port to link with NVR, electric door and it can connect programmable relay module to enable or disable more equipment.
PB-503R Wireless alarm keypad
Wireless alarm keypad is part of home or business security system. It is used to configure and monitor the alarm system.
It works with Focus professional meian tech security alarm control panel such as HA-VGT, FC-7664pro. It can inquiry the system status and receive alarm information.
Shop professional burglar and fire alarm systems at https://vedardalarm.com
Fire Alarm input module
The input module, also known as the monitoring module, is used to receive the action signal of the monitored device and can be connected to the monitored device with normally open or normally closed signal output.
The input module adds an address code to the action signal of the monitored device, and transmits it to the fire alarm controller through the signal bus to issue an alarm signal or linkage trigger signal.
Residual current electrical fire detector
Residual current electrical fire detector is used to monitor the change of residual current value in the protected line.
When the residual current in the protected electrical line exceeds the alarm set value, it can send alarm and control signals.
It is generally composed of residual current sensor and signal processing unit.
gas fire extinguishing control system
The gas fire extinguishing control system mainly consists of gas fire extinguishing controller, fire detector, manual automatic switch, emergency start and stop button, sound and light alarm, gas spraying indicator light and so on.
The fire detector generally adopts smoke fire detector and temperature fire detector. In special cases, manual alarm buttons or other types of fire detectors can also be used.
Gas fire extinguishing controller linkage control gas fire extinguishing equipment, linkage control fan, air valve, fire valve, ventilation and air conditioning, automatic doors and windows and other equipment, and receive feedback signals.
gas fire extinguishing system instruction
How does the gas fire extinguishing system work and how to install it and use it? Where is it installed and why does it have to be installed? Whether the gas sparyed by fire fighting is harmful to human body and equipment? The gas fire extinguishing system should be installed in library, computer room, warehouse to protect equipment and property when fire occurs. But the gas sprayed is harmful for human body. So, there are two step to start gas extinguishing and 3 ways to start it. Shop fire alarm and fire fighting system at https://www.vedardsecurity.com
Fire alarm and fire automatically extinguishing system consists of various fire detectors include smoke detector, heat detector, manual call point, break glass and gas extinguishing system, gas release start button, gas release indicator. The gas release will be started by automatic mode, manual mode or mechanical mode according to on site situation. And it will be started after smoke detector triggers alarm and heat detector or manual call point triggers fire alarm. The gas fire extinguishing system can be connected with central fire alarm monitor panel installed in fire security room. After fire alarm triggers, the central fire alarm monitor will trigger alarm.
More from Vedard Security Alarm System Store (20)
Security service equipment integrated CCTV and burglar fire alarm
Security service equipment integrated CCTV and burglar fire alarm
FC-7664PRO alarm panel professional security system
FC-7664PRO alarm panel professional security system
Recently uploaded
「進化するアプリ イマ×ミライ ～生成AIアプリへ続く道と新時代のアプリとは～」Interop24Tokyo APPS JAPAN B1-01講演
進化するアプリ イマ×ミライ
～生成AIアプリへ続く道と新時代のアプリとは～
2024/6/12～14まで幕張メッセで開催されました、インターロップ併設アプリジャパンの展示会場内ROOM Bで、10:30～11:10の枠で登壇させてもらいましたセッション資料を公開します。
生成AIがもたらすコンテンツ経済圏の新時代 The New Era of Content Economy Brought by Generative AI
、コンテンツ制作の主体をプロのクリエーターからユーザーへと移行させている現状をご存じの方も多いでしょう。現在、画像コンテンツ制作現場では生成AIがクリエーターを支援するツールとして利用されています。セミナーでは、画像生成における自動化の境界についての議論が予定されています。
AIの利用には著作権や倫理的な問題も伴いますが、クリエーターとAIが共存し、センシング技術と統合することで新しい形のコンテンツが生み出されることが期待されています。
Generating Automatic Feedback on UI Mockups with Large Language Models
Generating Automatic Feedback on UI Mockups with Large Language Modelsを和訳紹介したものです
論文紹介：Deep Learning-Based Human Pose Estimation: A Survey
Ce Zheng, Wenhan Wu, Chen Chen, Taojiannan Yang, Sijie Zhu, Ju Shen, Nasser Kehtarnavaz, Mubarak Shah, "Deep Learning-Based Human Pose Estimation: A Survey" arXiv2020
https://arxiv.org/abs/2012.13392
Recently uploaded (7)
ハイブリッドクラウド研究会_Hyper-VとSystem Center Virtual Machine Manager セッションMM
ハイブリッドクラウド研究会_Hyper-VとSystem Center Virtual Machine Manager セッションMM
「進化するアプリ イマ×ミライ ～生成AIアプリへ続く道と新時代のアプリとは～」Interop24Tokyo APPS JAPAN B1-01講演
「進化するアプリ イマ×ミライ ～生成AIアプリへ続く道と新時代のアプリとは～」Interop24Tokyo APPS JAPAN B1-01講演
生成AIがもたらすコンテンツ経済圏の新時代 The New Era of Content Economy Brought by Generative AI
生成AIがもたらすコンテンツ経済圏の新時代 The New Era of Content Economy Brought by Generative AI
Humanoid Virtual Athletics Challenge2024 技術講習会 スライド
Humanoid Virtual Athletics Challenge2024 技術講習会 スライド
Generating Automatic Feedback on UI Mockups with Large Language Models
Generating Automatic Feedback on UI Mockups with Large Language Models
論文紹介：Deep Learning-Based Human Pose Estimation: A Survey
論文紹介：Deep Learning-Based Human Pose Estimation: A Survey