This document authorizes Peachtree Playthings (Hk) Ltd. to produce and distribute Disney-branded toys from a manufacturing facility in Dongguan, China. The facility, Dongguan Xi Fu Plastics Products Co., Ltd., is authorized to produce roto mold banks and other toys featuring Disney properties. Peachtree Playthings is permitted to sell the toys in various countries including the US, Canada, and UK through August 2017.
METHANOL PLANT - SHALE GAS FEED PRETREATMENT
CASE STUDY #091406
Case Background
A Methanol plant operator would like to examine the technical feasibility of using Shale Gas as a feedstock to their Methanol plant.
The first step in the Methanol production process is gas pretreatment. The purpose of gas pretreatment is to make the gas suitable for the downstream processes. There are two groups of compounds that are usually present in natural gas and that should be removed during pretreatment—the associate NGL and the sulfur-containing compounds. Some natural gas reservoirs may also have other trace components that must be removed, but these are not discussed here.
This case study examines the impact of CO2 (Carbon Dioxide) on the pre-treatment section design, performance and efficiency of ACME Methanol Plant’ feed gas pre-treatment section.
Case 1: Normal Shale Gas
Case 2: “Bad Gas”
Case 3: Low CO2
Case 4: High CO2
Pollution is the introduction of contaminants into the natural environment that cause adverse change. Pollution can take the form of chemical substances or energy, such as noise, heat or light. Pollutants, the components of pollution, can be either foreign substances/energies or naturally occurring contaminants.
METHANOL PLANT - SHALE GAS FEED PRETREATMENT
CASE STUDY #091406
Case Background
A Methanol plant operator would like to examine the technical feasibility of using Shale Gas as a feedstock to their Methanol plant.
The first step in the Methanol production process is gas pretreatment. The purpose of gas pretreatment is to make the gas suitable for the downstream processes. There are two groups of compounds that are usually present in natural gas and that should be removed during pretreatment—the associate NGL and the sulfur-containing compounds. Some natural gas reservoirs may also have other trace components that must be removed, but these are not discussed here.
This case study examines the impact of CO2 (Carbon Dioxide) on the pre-treatment section design, performance and efficiency of ACME Methanol Plant’ feed gas pre-treatment section.
Case 1: Normal Shale Gas
Case 2: “Bad Gas”
Case 3: Low CO2
Case 4: High CO2
Pollution is the introduction of contaminants into the natural environment that cause adverse change. Pollution can take the form of chemical substances or energy, such as noise, heat or light. Pollutants, the components of pollution, can be either foreign substances/energies or naturally occurring contaminants.
Nitrogen (N2) is a colorless, odorless, and tasteless gas that makes up 78.09% (by volume) of the air we breathe. It is non-flammable and it will not support combustion. Nitrogen gas is slightly lighter than air and slightly soluble in water. It is commonly thought of and used as an inert gas, but it is not truly inert.
Nitrogen gas is also used to provide an unreactive atmosphere. It is used in this way to preserve foods, and in the electronics industry during the production of transistors and diodes. Large quantities of nitrogen are used in annealing stainless steel and other steel mill products.
H - Acid Caustic Fusion Stage
CONTENTS
0 INTRODUCTION
1 DESIGN INFORMATION
1.1 Reactor Type
1.2 Temperature Range
1.3 Pressure Range
1.4 Chemical System
2 BACKGROUND
3 KINETICS AND MECHANISM
4 MAXIMUM YIELD AND IMPLICATIONS FOR REACTOR DESIGN
5 USE OF DESIGN MODEL FOR START-UP AND MANUFACTURING MONITORING
6 BIBLIOGRAPHY
FIGURES
1 FUSION MODEL OUTLINE MECHANISM AND KINETIC SCHEME
2 TEST RUN OPTIMIZATION OF HEATING TIME 3600 kg/h STEAM
Techno-economic analyses of specific Sodium Lauryl Ether Sulfate (SLES) production processes, presenting capital investment breakdown, raw materials consumed and operating costs. Know more at www.intratec.us/products/sles-production-processes
Nitrogen (N2) is a colorless, odorless, and tasteless gas that makes up 78.09% (by volume) of the air we breathe. It is non-flammable and it will not support combustion. Nitrogen gas is slightly lighter than air and slightly soluble in water. It is commonly thought of and used as an inert gas, but it is not truly inert.
Nitrogen gas is also used to provide an unreactive atmosphere. It is used in this way to preserve foods, and in the electronics industry during the production of transistors and diodes. Large quantities of nitrogen are used in annealing stainless steel and other steel mill products.
H - Acid Caustic Fusion Stage
CONTENTS
0 INTRODUCTION
1 DESIGN INFORMATION
1.1 Reactor Type
1.2 Temperature Range
1.3 Pressure Range
1.4 Chemical System
2 BACKGROUND
3 KINETICS AND MECHANISM
4 MAXIMUM YIELD AND IMPLICATIONS FOR REACTOR DESIGN
5 USE OF DESIGN MODEL FOR START-UP AND MANUFACTURING MONITORING
6 BIBLIOGRAPHY
FIGURES
1 FUSION MODEL OUTLINE MECHANISM AND KINETIC SCHEME
2 TEST RUN OPTIMIZATION OF HEATING TIME 3600 kg/h STEAM
Techno-economic analyses of specific Sodium Lauryl Ether Sulfate (SLES) production processes, presenting capital investment breakdown, raw materials consumed and operating costs. Know more at www.intratec.us/products/sles-production-processes
1. FACILITY AND MERCHANDISE AUTHORIZATION
LICENSEE/VENDOR NAME: Peachtree Playthings (Hk) Ltd. TELEPHONE NUMBER: 770-579-7640
LICENSEE/VENDOR ADDRESS: FAX NUMBER: 770-579-7651
601 Woodlawn Drive, NE
Building #200
Marietta, GA 30067
USA
CONTACT NAME, TITLE AND, IF AVAILABLE, E-MAIL ADDRESS:
Mark Tasman
mark.tasman@peachtreeplaythings.com
1. Manufacturing Facility Name (Place Where Merchandise is Produced):
Dongguan Xi Fu Plastics Products Co., Ltd.
(N105-1746-7)
1a. Manufacturing Facility Address:
Bldg. No.8, Nanshan Second Industrial Park
Yan Tian Administrative Area, Feng Gang Town
Dongguan, Guangdong
China
1b. Telephone Number: 86-769-8756-4598
1c. Fax Number: 86-769-8756-4799
1d. Contact Name and Title: Mr. He Shi Ming, Manager
1e. List all other names by which the manufacturing facility is known (if
applicable):
1f. Is this manufacturing facility owned by the licensee/vendor?
No
1g. List all authorized merchandise produced in this facility (as listed on
the Licensee/Vendor Agreement): Attach a separate sheet if
necessary
Contract No. 0622335522:
1. Roto mold banks
2. Property, Brand or Logo produced in this facility:
Brave, Cars, Cars 2, Disney Princess, Disney Princess Palace Pets,
Doc McStuffins, Fairies, Finding Nemo, Frozen, Jake and the Never
Land Pirates, Lion King, Mickey Mouse Club House, Minnie, Minnies
Bow-Tique, Monsters Inc, Monsters University, Phineas and Ferb,
Planes, Sofia the First, Standard Characters, The Good Dinosaur,
Toy Story, Toy Story 2, Toy Story 3, Wheres My Water, Winnie The
Pooh, Wreck-It Ralph
3. Territory Where Merchandise May Be Sold and/or Given Away:
Australia, Canada, Korea, South, Mexico, Puerto Rico, Spain, USA,
United Kingdom
4. Shipper Importer of Record (check one).
Provide Name and Address: Only List if the Transporter of the
Merchandise is other than Facility or Licensee/Vendor.
Once signed on behalf of Disney Consumer Products, Inc., and/or its affiliates and/or its authorized sublicensors ("Disney") this
document may be presented to the Customs authority at the port of export from the country specified above where the
manufacturing facility is located and at the port of entry in the country specified as the territory where the Merchandise may be
sold to confirm Disney's authorization of shipments of the Merchandise identified above. This Authorization shall expire on the
first to occur of the following: (1) the passage of 3 years from the date set forth below, (2) the expiration or termination of the
applicable agreement between Licensee/Vendor and Disney, or, (3) the termination of the Authorization by Disney.
Best Regards,
International Labor Standards
Shawnna M. Stewart Date: August 12, 2014
DN: cn=Shawnna M. Stewart, o=Disney
Worldwide Services, Inc., ou=International
Labor Standards,
email=shawnna.m.stewart@disney.com, c=US
Date: 2014.08.12 17:23:55 -07'00'
Adobe Acrobat version: 11.0.7