Differentiate between analog and digital signals.SolutionIn ana.pdf
•
0 likes•2 views
Convert the following conditional statement to MARS assembly language. You may assume that a is in $s0 and b is in $s1. if(a > b) {a = a - b;} else {b = b - a;} Solution Code for the following conditional statement : Explanation : if condition is true then it jumps to else ( condition in the program is just opposite to the condition given in question ) and ends. If the condition is false, then it does the if part and jumps to add so that the else part wont execute.
Report
Share
Report
Share
Download to read offline
Recommended
Explain how HPV leads to cervical cancer and oral cancer. Include.pdf
Describe the basic characteristics of Judaism, including but not limited to: its history, its primary
beliefs, its criticisms, its practices, and its organization.
3 references
Solution
Judaism believes in one God ,it believes God is only one its a monotheistic faith.judaism
believes in justice with everyone it says justice is above than any rituals.judaism teaches that all
human are created in the image of human.every human has God in his body.so everyone should
be treated nicely,all are equally important .
Judaism also believes that God will send MESIAH one day to unity or happiness in their life.this
is key difference between Judaism and Christianity,Christianity believes messiah has already
come in the image of Jesus christ.judaism is related to Jewish religion .The Torah is the main
religious text of the Judaism .The main branches of Judaism are
orthodox,conservative,Reconstructionist and reform..
Consider L = {a^nb^2nc^P p 0}. Prove L is not a context-free langu.pdf
Capital and Revenue Expenditures On February 13, Scanlon Co. paid $3,400 to repair the
transmission on one of its delivery vans.
In addition, Scanlon paid $20 to install a GPS system in its van.
Journalize the entries for the transmission. February 13? It should be two answers, Cr/Dr
Journalize the entry for GPS system expenditures. February 13? It should be two answers, Cr/Dr
Solution
Account Debit Credit Accumulated Depreciation- Delivery Van $3400 Cash $3400 To
record the repair of transmission on delivery vans.(Revenue Expenditure Delivery Van $20
Cash $20 (To record capital expenditure on Van (installing GPS).
describe two properties of iPS and ES cells, including the meaning i.pdf
Consider the RC circuit shown below: What is the characteristic time constant of the circuit?
What is the maximum charge on the capacitor? How long does it take after the switch is closed
to charge the capacitor to within 63% of its maximum charge
Solution
a)
Time constant is given by, T = R*C = 100*3.2*10^-6
= 3.2*10^-4 s
b\')
maximum charge, Qo = C*Vmax
= 3.2*10^-6*15
= 4.8*10^-5 C
c)
The chrarge on the capacitor is given by :
Q = Qo*(1 - e^(-t/RC))
Now, Q = 63 percent of Qo = 0.63*Qo
So, 0.63*Qo = Qo*(1 - e^(-t/RC))
= e^(-t/RC) = 0.37
So, -t/RC = ln(0.37) = -0.994
So, t = RC*0.994
= 3.2*10^-4*0.994
= 3.18*10^-4 s <--------answer.
Coffman Company issued 1,000,000 10 year 10 percent bonds January 1,.pdf
Calculate the future value of an investment of $1,000, after 6 months, earning 6% APR,
compounded monthly, by compounding manually.
Solution
A=P(1+r/n)^nt
p= Principle value =$1000
r= rate in decimal =0.06
n =number of times that the interest compounded in one year = 12
t= The number of years the money borrowed or invested = 0.5
A=1000(1+0.06/12)^12*0.5
A=$1030.38.
A JAR file contains an image named images Fall.png. Java class na.pdf
A JAR file contains an image named \"images Fall.png\". Java class named Foo, also contained
in the same JAR file, attempts to read the image with the following code: URL url = Foo .class
.getResource (\"images/fall.png\"); Imagelcon image = new ImageIcon(ur1); The program
compiles but fails to load the image. What is wrong?
Solution
Here if we go via syntax then its fine hence compiled successfully but if you try to run it it will
fail to load the image as it won\'t be able to find the file because its unable to locate fall.png as
resoucre naming in jar file is case sensitive and in your call your are trying to load an image with
name fall.png where image with Fall.png is present not fall.png..
A 71-year-old male patient comes to the hospital after having been p.pdf
A 71-year-old male patient comes to the hospital after having been previously diagnosed with
benign prostatic hypertrophy with urinary obstruction. Due to this condition, the patient is
experiencing increased urination, straining during urination, and a continual feeling of fullness
after the bladder has Intermediate Medical Coding 2 Intermediate Medical Coding been emptied.
The physician performs a cystourethroscopy to examine the condition of the bladder and urethra,
and then subsequently performs a UroLift transprostatic implant procedure using three adjustable
implants. CPT code(s): __________________________________________
Solution
Ans: Urolift implant & codes
Step1 : Understanding BPH Symptom & cystoscopy
Symptom Index for the patient matches with BPH ( force and frequency of urination etc). To
diagnose the cause of BPH an endoscopy of the urinary bladder is needed. This is done via the
urethra. It has a special name: cystoscopy. The procedure is carried out using an instrument
called a cystoscope. It uses a thin, fibre-optic tube that has a light and camera at one end.
Step2 : The UroLift & the 3 Implant
This treatment uses a minimally invasive approach to treating BPH. It lifts or holds the enlarged
prostate tissue out of the way by using implants so it no longer blocks the urethra. There is no
cutting, heating or removal of prostate tissue.
Step 3: The CPT code
When a surgical or similar procedure like Urolift is done on a patient, a few rules have to be
followed. This includes
infoming the patient and the related parties about the procedure before perfoming it and getting
their
conscent in the appropriate manner. This process of informing the patient and all the concerned
parties
is called CPT. American Medical Association has issed a systematic code to ensure all the details
of this
procudure are completed with accuracy and precesion.
The term CPT stands for \"Current Procedural Terminology\".
It contains a set of information which is copyright protected by the American Medical
Association.
Step 4 : Major Features of CPT
1. CPT describes all tmedical, surgical, and diagnostic services clearly.
2. It is designed to communicate uniform information about medical services and procedures
among
all parties: physicians, coders, patients, accreditation organizations, and payers for
administrative, financial,
and analytical sections. This clarity and transparency is very important.
3. It is the service provider’s responsibility to select the most accurate codes to report a patient’s
condition
and the services they rendered.
4. In this case , the service provider has to provide applicable coding information for the
transprostatic implant
procedure using the UroLift® System.
5. The patient is likely to have medical coverage . Some payers of this coverage may have
unique coding
requirements; the service provider has to verify coding with the health plan.
Step 5: Sample CPT
1. ICD-10 Diagnosis Coding : N40.1: Enlarged prostate with lower urina.
You are carrying out experiments in cell fusion by fusing together ce.pdf
what is the Matlab code of the two functions, I want to plot them in Matlab
m,n vary from -50 to 50 c. (7%) fam, n) sin m) cos n), where m and n vary from d. (7%) f(x, y)
sin (r) cos y), where x and y vary from
Solution
t = 0:0.01:(2*pi); x = cos(t); y = sin(t); plot(t,x,\'k\'); hold on; plot(t,y,\'r-.\'); axis([0 2*pi -1.5
1.5]) legend(\'cos(t)\',\'sin(t)\',\'Location\',\'.
Write an MPI program that implements a shell-sort like parallel algo.pdf
What high-level position manager is responsible for working with the CEO and company
president to determine the company\'s competitive strategy?
Solution
Answer:
Responsibilities of a high-level position manager working with the CEO and company president
to determine company\'s competitive strategy are as below-
(1) To make available company\'s financial on time to CEO and company president.
(2) To make them aware about the employees\' performance and satisfaction level.
(3) To request for change in practices and policies of company for betterment of company.
(4) To make them aware about competitor\'s product, services and practices.
(5) To implement decision taken by CEO/President in the meeting.
(6) To present competitive analysis of market share, price of product, services offered by the
company.
(7) To answer all the queries asked by CEO/President in timely and correct manner.
(8) To give proper updation about competitors new strategy, their new policies and impact of
those on company.
(9) To actively participate in making company\'s strategy with CEO and company president.
(10) To ask questions raised by the employees/customers/suppliers etc. for company\'s product
and services..
Recommended
Explain how HPV leads to cervical cancer and oral cancer. Include.pdf
Describe the basic characteristics of Judaism, including but not limited to: its history, its primary
beliefs, its criticisms, its practices, and its organization.
3 references
Solution
Judaism believes in one God ,it believes God is only one its a monotheistic faith.judaism
believes in justice with everyone it says justice is above than any rituals.judaism teaches that all
human are created in the image of human.every human has God in his body.so everyone should
be treated nicely,all are equally important .
Judaism also believes that God will send MESIAH one day to unity or happiness in their life.this
is key difference between Judaism and Christianity,Christianity believes messiah has already
come in the image of Jesus christ.judaism is related to Jewish religion .The Torah is the main
religious text of the Judaism .The main branches of Judaism are
orthodox,conservative,Reconstructionist and reform..
Consider L = {a^nb^2nc^P p 0}. Prove L is not a context-free langu.pdf
Capital and Revenue Expenditures On February 13, Scanlon Co. paid $3,400 to repair the
transmission on one of its delivery vans.
In addition, Scanlon paid $20 to install a GPS system in its van.
Journalize the entries for the transmission. February 13? It should be two answers, Cr/Dr
Journalize the entry for GPS system expenditures. February 13? It should be two answers, Cr/Dr
Solution
Account Debit Credit Accumulated Depreciation- Delivery Van $3400 Cash $3400 To
record the repair of transmission on delivery vans.(Revenue Expenditure Delivery Van $20
Cash $20 (To record capital expenditure on Van (installing GPS).
describe two properties of iPS and ES cells, including the meaning i.pdf
Consider the RC circuit shown below: What is the characteristic time constant of the circuit?
What is the maximum charge on the capacitor? How long does it take after the switch is closed
to charge the capacitor to within 63% of its maximum charge
Solution
a)
Time constant is given by, T = R*C = 100*3.2*10^-6
= 3.2*10^-4 s
b\')
maximum charge, Qo = C*Vmax
= 3.2*10^-6*15
= 4.8*10^-5 C
c)
The chrarge on the capacitor is given by :
Q = Qo*(1 - e^(-t/RC))
Now, Q = 63 percent of Qo = 0.63*Qo
So, 0.63*Qo = Qo*(1 - e^(-t/RC))
= e^(-t/RC) = 0.37
So, -t/RC = ln(0.37) = -0.994
So, t = RC*0.994
= 3.2*10^-4*0.994
= 3.18*10^-4 s <--------answer.
Coffman Company issued 1,000,000 10 year 10 percent bonds January 1,.pdf
Calculate the future value of an investment of $1,000, after 6 months, earning 6% APR,
compounded monthly, by compounding manually.
Solution
A=P(1+r/n)^nt
p= Principle value =$1000
r= rate in decimal =0.06
n =number of times that the interest compounded in one year = 12
t= The number of years the money borrowed or invested = 0.5
A=1000(1+0.06/12)^12*0.5
A=$1030.38.
A JAR file contains an image named images Fall.png. Java class na.pdf
A JAR file contains an image named \"images Fall.png\". Java class named Foo, also contained
in the same JAR file, attempts to read the image with the following code: URL url = Foo .class
.getResource (\"images/fall.png\"); Imagelcon image = new ImageIcon(ur1); The program
compiles but fails to load the image. What is wrong?
Solution
Here if we go via syntax then its fine hence compiled successfully but if you try to run it it will
fail to load the image as it won\'t be able to find the file because its unable to locate fall.png as
resoucre naming in jar file is case sensitive and in your call your are trying to load an image with
name fall.png where image with Fall.png is present not fall.png..
A 71-year-old male patient comes to the hospital after having been p.pdf
A 71-year-old male patient comes to the hospital after having been previously diagnosed with
benign prostatic hypertrophy with urinary obstruction. Due to this condition, the patient is
experiencing increased urination, straining during urination, and a continual feeling of fullness
after the bladder has Intermediate Medical Coding 2 Intermediate Medical Coding been emptied.
The physician performs a cystourethroscopy to examine the condition of the bladder and urethra,
and then subsequently performs a UroLift transprostatic implant procedure using three adjustable
implants. CPT code(s): __________________________________________
Solution
Ans: Urolift implant & codes
Step1 : Understanding BPH Symptom & cystoscopy
Symptom Index for the patient matches with BPH ( force and frequency of urination etc). To
diagnose the cause of BPH an endoscopy of the urinary bladder is needed. This is done via the
urethra. It has a special name: cystoscopy. The procedure is carried out using an instrument
called a cystoscope. It uses a thin, fibre-optic tube that has a light and camera at one end.
Step2 : The UroLift & the 3 Implant
This treatment uses a minimally invasive approach to treating BPH. It lifts or holds the enlarged
prostate tissue out of the way by using implants so it no longer blocks the urethra. There is no
cutting, heating or removal of prostate tissue.
Step 3: The CPT code
When a surgical or similar procedure like Urolift is done on a patient, a few rules have to be
followed. This includes
infoming the patient and the related parties about the procedure before perfoming it and getting
their
conscent in the appropriate manner. This process of informing the patient and all the concerned
parties
is called CPT. American Medical Association has issed a systematic code to ensure all the details
of this
procudure are completed with accuracy and precesion.
The term CPT stands for \"Current Procedural Terminology\".
It contains a set of information which is copyright protected by the American Medical
Association.
Step 4 : Major Features of CPT
1. CPT describes all tmedical, surgical, and diagnostic services clearly.
2. It is designed to communicate uniform information about medical services and procedures
among
all parties: physicians, coders, patients, accreditation organizations, and payers for
administrative, financial,
and analytical sections. This clarity and transparency is very important.
3. It is the service provider’s responsibility to select the most accurate codes to report a patient’s
condition
and the services they rendered.
4. In this case , the service provider has to provide applicable coding information for the
transprostatic implant
procedure using the UroLift® System.
5. The patient is likely to have medical coverage . Some payers of this coverage may have
unique coding
requirements; the service provider has to verify coding with the health plan.
Step 5: Sample CPT
1. ICD-10 Diagnosis Coding : N40.1: Enlarged prostate with lower urina.
You are carrying out experiments in cell fusion by fusing together ce.pdf
what is the Matlab code of the two functions, I want to plot them in Matlab
m,n vary from -50 to 50 c. (7%) fam, n) sin m) cos n), where m and n vary from d. (7%) f(x, y)
sin (r) cos y), where x and y vary from
Solution
t = 0:0.01:(2*pi); x = cos(t); y = sin(t); plot(t,x,\'k\'); hold on; plot(t,y,\'r-.\'); axis([0 2*pi -1.5
1.5]) legend(\'cos(t)\',\'sin(t)\',\'Location\',\'.
Write an MPI program that implements a shell-sort like parallel algo.pdf
What high-level position manager is responsible for working with the CEO and company
president to determine the company\'s competitive strategy?
Solution
Answer:
Responsibilities of a high-level position manager working with the CEO and company president
to determine company\'s competitive strategy are as below-
(1) To make available company\'s financial on time to CEO and company president.
(2) To make them aware about the employees\' performance and satisfaction level.
(3) To request for change in practices and policies of company for betterment of company.
(4) To make them aware about competitor\'s product, services and practices.
(5) To implement decision taken by CEO/President in the meeting.
(6) To present competitive analysis of market share, price of product, services offered by the
company.
(7) To answer all the queries asked by CEO/President in timely and correct manner.
(8) To give proper updation about competitors new strategy, their new policies and impact of
those on company.
(9) To actively participate in making company\'s strategy with CEO and company president.
(10) To ask questions raised by the employees/customers/suppliers etc. for company\'s product
and services..
Which of the following are roles of proteins Pick ALL that apply..pdf
udent OECONOMICS (Summer 2018) \', Assessments\', Resources ? D2L Help\'. erly Collins:
Attempt 1 Question 12 (1 point) GraphA Graph B $5.50 $5.00 $5.00 4.50 Di Dz 40 50 40 50 ue
or False. The economic incidence of the tax is the same regardless of whether it is a sales tax or
an excise tax. (See Hint below.) Tr True False D View hint for Question 12 Save Page 12
Previous Pase Next Pazie
Solution
False.
Explanation:
Sales tax is a tax burden on consumer hence affect the demand curve as demand falls down.
(Graph B)
Excise tax is levied on producer affect the supply curve as supply falls down. (Graph A)
In both the cases equilibrium, quantity will decline. But in case of sales tax where demand is
affected, the prices go down and when excise duty is levied supply goes down, resulting in an
increase in prices..
When are a persons fellowship, autonomy, and competence face threa.pdf
True or False: The aDDM fixes the SV reference problem by assuming that when a subject looks
at the left symbol first, then the SV signal uses the left symbol as the reference point throughout
the entire decision making process.
Please explain
Solution
Answer:-
False
Explanation:-
In fixing the SV reference, ADDM interprets the header information returned by the various
protocols in order to make a decision; it does not assume when a subject looks at the left symbol..
What is the function in homworts Where can one find homwortsS.pdf
This is a homework assignment for Computer Architecture and some question use MIPS
Assembly language.
1. In the following MIPS assembly code, translate all the instructions to their corresponding
machine code in hexadecimal format. This code is stored in the memory from address
0x1fff0000.
Loop: sw $t1, 4($s0)
addi $t1, $t1, -1
sll $t1, $t1, 2
bne $t1, $s5, Exit
addi $s0, $s0, 4
j Loop
Exit: …
2. Find the MIPS instruction with the machine code 0x02108020.
3. Find the decimal value of the 2\'s complement number 0xffffffab.
4. Compile the following C code into MIPS:
i=0;
while (i<=100) do
A[4*i]=0;
where integer i is in register $s0 and the base memory address of array A is in$s1.
Solution
1.
Loop: sw $t1, 4($s0)
The syntax is: SW rt, offset(base)
SW - 101011
rt - 01001
base - 10000
offset - 4 - 0000000000000100
So,the binary instruction is: 101011 10000 01001 0000000000000100
And its hex equivalent is: 0xAE090004
addi $t1, $t1, -1
The syntax is: ADDI rt, rs, immediate
ADDI - 001000
rt - 01001
rs - 01001
immediate - 1111111111111111
So, the binary instruction is: 001000 01001 01001 1111111111111111
And its hex equivalent is: 0x2129FFFF
sll $t1, $t1, 2
The syntax is: SLL rd, rt, sa
SPECIAL - 000000
SLL - 000000
0 - 00000
rd - 01001
rt - 01001
sa - 00010
So, the instruction is: 000000 00000 01001 01001 00010 000000
And its hex equivalent is: 0x00094880
bne $t1, $s5, Exit
The syntax is: BNE rs, rt, offset
BNE - 000101
rs - 01001
rt - 10101
offset - 0000000000011000
So, the instruction is: 000101 01001 10101 0000000000011000
And its hex equivalent is: 0x15350018
addi $s0, $s0, 4
The syntax is: ADDI rt, rs, immediate
ADDI - 001000
rt - 10000
rs - 10000
immediate - 0000000000000100
So, the instruction is: 001000 10000 10000 0000000000000100
And its hex equivalent is: 0x22100004
j Loop
The syntax is: J target
J - 000010
target - 11111111110000000000000000
So, the instruction is: 000010 11111111110000000000000000
And its hex equivalent is: 0x0BFF0000
Exit: ….
This is the assignmentOBJECTIVESAfter finishing this lab, stude.pdf
Sustainability: Sustainability is an important consideration for any nation. Discuss what countries
do to sustain their economy and help its people.
Solution
Sustainable development is a crucial subject to affix downward since it beset so many
contrasting stuff.Due to the complication of this accountable it is big to attention at the big in a
holistic action that approaches affair intelligently.The authority for sustainab;e development at
the civil level that is for the difficult mosaic is a mixture of economic,political that precondition
be bring combine under a particular set of circumstances.Any changes in the people life style
makes a economic atmosphere and candid of championship and business will make a country
effort easy..
Two paragraph opinion about the film editing of the movie LIFE OF .pdf
The collection of emerald-cut diamonds contains replications, several diamonds at each weight.
Had we fit the linear equation using average prices at each weight rather than individual
diamonds, how would the fitted equation and summary measures (rsquared2 and se) change?
The slope would
increase significantly
and the intercept would
be approximately the same.
The value of
s Subscript ese
would
increase significantly
and
rsquared2
would
decrease significantly.
Solution
The slope would
increase significantly
the intercept would
be approximately the same.
The value of s e would increase significantly
rsquared2
decrease significantly..
True or False The aDDM fixes the SV reference problem by assuming t.pdf
The Baker Man sells rolls for $0.35 each. To help its salespeople, the company would like a table
showing the cost of rolls for orders of 1 to 2 rolls. use for loop flowchart.
Solution
double cost = 0.35;
printf ( \" Number of rolls \\t\" , \" Cost \ \");
for( i=1 ; i <= 2 ; i++)
{ printf ( \"\\t %i \\t\" , i , \" $ %d \ \" , i*cost ); }.
The number of visits to public libraries increased from 1.4 billion i.pdf
Solve the equation for x. x/3 = 3/4 = 3x + 6/12
Solution
Given :
x/3 - 3/4 = (3x+6) / 12
Taking LCM of L.H.S we get:
( 4x - 9 ) / 12 = (3x+6) / 12
cancel both of terms in denominators, we get:
4x - 9 = 3x+6
4x - 3x = 6 + 9
4x - 3x = 15
x = 15 [ Answer ]
Now check the solution, we plug in the value of x in the given equation
15/3 - 3/4 = ( 3*15 + 6 )/ 12
5 - 3/4 = 51/12
(20-3)/4 = 51/12
17/4 = 17/4
Since, L.H.S = R.H.S, Hence our solution x = 15 is correct..
The first table contains data of the Student entry. Attributes are Si.pdf
say you have some pictures each 500 KB in size. Say you also go to a store and buy a new
desktop computer. Approximately how many pictures could you put on the hard disk, assuming
you could use all the space on the disk for your pictures? there is a range of possible answers;
you must use a hard disk size that is reasonable for a new desktop computer. show arithmetic.
Solution
say if u purchase a 1 GB hard disk,then 1 GB = 1000MB=10^6 KB ,so each 500 KB size then u
can store upto 10^6/500 =2000 photos.
similarly 1 TB HArd disk=1000GB = 10^9 KB= no of pictures can be stored is 2*10^6 ...
Save for Later 12) Viruses, adware and spyware are referred to collec.pdf
Portia Company is a retailer of hammers Portia pays $4.75 for each hammer and sells them for
$8.00. Monthiy fixed costs are $26,000. The hammer cost is the only variable cost a. What is the
contribution margin per unit? (Round your answer to 2 decimal places.) per Unit b. What is the
break-even point in units? (Do not round intermediate calculations.) Units c. How many units
will Portia need to sell to earn target profit of $13,000? (Do not round intermediate calculations.)
Solution
a. Contribution margin = $8.00 - $4.75 = $3.25 per unit
b. Break-even point = $26,000 / ($8.00 - $4.75) = 8,000 units
c. Total number of units = ($26,000 + $13,000) / ($8.00 - $4.75) = 12,000 units.
Sustainability Sustainability is an important consideration for any.pdf
Question: Consider formulas (B.32) and (B.33). Let X stand for the rate of return on a security,
say, IBM, and Ythe rate of return on another security, say, General Foods. Let Let sk = 16, = 9,
and r=-08. What is the variance of (X + Y) in this case? Is it greater than or smaller than var (X)
+ var (Y)? In this instance, is it better to invest equally in the two securities (i.e., diversify) than
in either security exclusively? This problem is the essence of the portfolio theory of finance.
(See, for example, Richard Brealey and Stewart Myers, Principles of Corporate Finance,
McGraw-Hill, New York, latest edition.) Myers, Principles of Corporate Finance, McGraw-Hill,
New York, atest edition.)
Solution
given var(x) = 16 and var(y) = 9.and correlation coefficient r = -0.8
stndrd deviation of x = 4,y= 3.
var(x+y) = 16 + 9 - 2X0.8X12 = 25 - 19.2 = 5.8 < var (x) +var(y)
it is better to invest in both X and Y securities.
Research health data stewardship and in your post show why it is imp.pdf
Please select the best/correct answer for each question:
1. The bandwidth of the BPX 65 photodiode reverse biased at 5V is about _____ kHz.
A) 20
B) 30
C) 40
D) 50
2. The wavelength of a photon having an energy of 3.0ev is about ______ nm.
A) 400
B) 500
C) 800
D) 1100
3. At about 0V reverse bias, the BPX 65 photodiode has a junction capacitance of about _____
pF.
A) 5
B) 10
C) 15
D) 20
Solution
1Ans: B ie. 30KHz
2Ans: D ie 1100nm
3 Ans: D ie. 20pF.
Read carefully. Im not sure if the point class is correct but postin.pdf
Please explain what\'s Zombie Process.
Solution
zombie process is a process state when the child dies before the parent process,
in this case the structural information of the process is still in the process table.
when a process finishes execution,it will have an exit status to report to its parent process.
because of this last little bit of information,the process will remain in the operating system\'s
process table as a zombie process.indicating that it is not
to be schedule for further execution,but that it cannot be completly removed untill it has been
determined that the exit status is no longer needed..
Powell and three companions attended a rock concert performed by Joh.pdf
Module 02 Discussion 2 - McCarthyism
Define the \"McCarthyism\". Explain how this term was created. How did McCarthyism affect
Hollywood during the cold war era?
Module 02 Discussion 2 - McCarthyism
Define the \"McCarthyism\". Explain how this term was created. How did McCarthyism affect
Hollywood during the cold war era?
Module 02 Discussion 2 - McCarthyism
Define the \"McCarthyism\". Explain how this term was created. How did McCarthyism affect
Hollywood during the cold war era?
Solution
McCarthyism: McCarthyism is defined as the opposition to communists religion shown by
Senator Joseph R McCarthy and his supporters, in the period of 1940 to 1954 in US nation. This
period is known as McCarthyism period.
This term was created based on the role and work carried out by the Senator Josesh R McCarthy
and hid supporter in the US nation during the 1940 to 1954 time period. Since the work was
leaded by Mr. J R McCarthy, so based on his name this word is derived as McCarthyism.
During the McCarthyism time period, it also affects the Hollywood during that time. Since this
was against the communists, so around 10 people which were engaged in the film making at
Hollywood were removed from film making at Hollywood, and later they were sentenced to jail.
These people were good screen players and film writer, but these were not let for work in
Hollywood. The McCarthyism had the impact at the Hollywood also..
Please answer in MIPS assembly language only. Write the following ne.pdf
Let\'s focus on the business publications (WSJ, Forbes, Fortune, Business Week etc.) this week.
Please find at least three current articles that are about firms that relate to one or more of the
following strategies:
Innovation - incremental or disruptive
Entrepreneurship
International strategies employed by a firm
Outsourcing
International Financial transaction and/or risk
Market Matrix - (BCG Model) for portfolio management
Discuss how the articles chosen tie to this week’s chapter readings of competitive value and
entrepreneurial strategies.
Please include either the actual PDF of the article or the link to so so that your colleagues can
access the information and provide feedback that is more informed. I look forward to reading
your postings and collegial feedback.
Solution
THe following are tge articles you can refer to related to innovation in business world.
1.https://www.forbes.com>2017/06/17
Article on Why companies must align Innovation strategy with business strategy.
2.https://www.ijsv.net>article
Implications of Globalization for International Business Strategy.
3.Https://www.nytimes.com>technology
Hotspot for technology Outsourcing:The United States-The New York Times.
Oxygen and ozone form the equilibrium below. The partial pressure of.pdf
Lawrence Technological University
Engineering Technology Department
Manufacturing Engineering Processes (TIE3063)
Instructions: Type your answers to the following questions (no hand-written).
Assembly Line Methods
1. An assembly line is a manufacturing process in which interchangeable parts are added to
a product to create ___________.
a. a station
b. an end product
c. a separate module
2. ____________limitations can have a big impact on a small business’s blueprint for
introducing or improving assembly line methods.
People
Government
Capital
3. The ________ assembly methodology is designed to improve throughput by increasing
the efficiency of parallel subassembly lines feeding into the final assembly line.
a. cell manufacturing
b. modular assembly
c. U-shaped assembly line
4. This ________ method has evolved out of increased ability of machines to perform
multiple tasks.
a. cell manufacturing
b. modular assembly
c. U-shaped assembly line
5. On ________ workers are collected on the inside of the curve and communication is
easier than along the length of a straight line.
a. cell manufacturing
b. modular assembly
c. U-shaped assembly line
6. When choosing an assembly system, it is important to understand the ________ for the
product you’re assembling and how you can justify the costs associated with its process
improvement.
products
goals
workstations
7. _________ systems are used when their products don’t lend themselves to automation.
Manual Semi-automatic
Semi-automated
Fully-automated
8. _________ are useful for companies that need to improve their manufacturing process,
but aren’t able to completely remove the operator assistance.
Manual Semi-automatic
Semi-automated
Fully-automated
9. Assembly line automation is a process that calls for making use of equipment to manage
________ along the assembly line that were once managed by employees.
quality
tasks
workstations
List the classification of the four classical and one new manufacturing system designs ?
NO HAND-WRIITEN
1. An assembly line is a manufacturing process in which interchangeable parts are added to
a product to create ___________.
a. a station
b. an end product
c. a separate module
2. ____________limitations can have a big impact on a small business’s blueprint for
introducing or improving assembly line methods.
People
Government
Capital
3. The ________ assembly methodology is designed to improve throughput by increasing
the efficiency of parallel subassembly lines feeding into the final assembly line.
a. cell manufacturing
b. modular assembly
c. U-shaped assembly line
4. This ________ method has evolved out of increased ability of machines to perform
multiple tasks.
a. cell manufacturing
b. modular assembly
c. U-shaped assembly line
5. On ________ workers are collected on the inside of the curve and communication is
easier than along the length of a straight line.
a. cell manufacturing
b. modular assembly
c. U-shaped assembly line
6. When choosing an assembly system, it is impor.
Part A Spacecraft instruments measure the radiation from an asteroid,.pdf
Let A be an n times m matrix, let vector b elementof E^n and let vector u, vector w, (both in
E^m) be solutions to the matrix equation A vector x = vector b. 1 If vector v = vector u - vector
w use the properties of matrix multiplication to show that: A(t vector v) = vector 0_E^n for any
real number t. vector u + t vector v is a solution to the matrix equation A vector x = vector b for
any real number t.
Solution
1.
A(tv)=tAv=tA(u-w)=tAu-tAw=tb-tb=0
We used the linearity of matrix multiplication here.
2.
A(u+tv)=Au+A(tv)=b+0=b
HEre we used: A(tv)=0 for any real number t from part 1.
Hence proved.
LymeDisease1.–What is the disease called -- explain what the name .pdf
Implement a calculator (not postfix notation) using Swift Programming Language(Swift 3, basic
ios app). Please use MVC model(CalculatorBrain.swift can be the model and
ViewController.swift can be the view). Also please post the sreenshot of the storyboard that you
make.
Requirements:
Implement add subtract, multiply, divide, pi, sqrt, Euler’s natural number (e), co-sine and equals.
Ensure you have the ability to handle multiple operations in sequence
Implement the ability to enter floating point numbers into the display
Add 4 more buttons (ex. sine)
Handle multiple operations in a sequence.
Add a memory function to your calculator that stores and retrieves a number. Implement the
following buttons at the top of the keyboard
MC = Memory clear sets memory to 0
MR – Memory recall uses the number in memory acting as it you typed that number in yourself
MS – Memory Store puts the number on display into memory
M+ – Memory takes the number on the display, adds it to the memory, and puts the result into
memory.
Implement a clear (C) button. If the clear button is pressed once, it should take whatever was
typed before the last enter and put it to 0. If the clear is entered twice, it should clear the stack.
Show the history of every operand and operation input by displaying it.
Solution
import UIKit
class ViewController: UIViewController {
@IBOutlet weak var display: UILabel!
@IBOutlet weak var history: UILabel!
var userIsInTheMiddleOfTypingANumber = false
let x = M_PI
@IBAction func appendDigit(sender: UIButton) {
let digit = sender.currentTitle!
if userIsInTheMiddleOfTypingANumber {
display.text = display.text! + digit
} else {
display.text = digit
userIsInTheMiddleOfTypingANumber = true
}
}
@IBAction func operate(sender: UIButton) {
let operation = sender.currentTitle!
switch operation
{
case \"×\": performOperation { $0 * $1 }
case \"÷\": performOperation { $1 / $0 }
case \"+\": performOperation { $0 + $1 }
case \"\": performOperation { $1 - $0 }
case \"\": performOperation { sqrt($0) }
case \"sin\": performOperation { sin($0) }
case \"cos\": performOperation { cos($0) }
default: break
}
}
func performOperation(operation: (Double, Double) -> Double)
{
if operandStack.count >= 2
{
displayValue = operation(operandStack.removeLast(), operandStack.removeLast())
enter()
}
}
func performOperation(operation: (Double) -> Double) {
if operandStack.count >= 1 {
displayValue = operation(operandStack.removeLast())
enter()
}
}
var operandStack = Array()
@IBAction func enter() {
userIsInTheMiddleOfTypingANumber = false
decimalIsPressed = false
operandStack.append(displayValue)
history.text = \"\\(displayValue)\"
println(\"operandStack = \\(operandStack)\")
}
var decimalIsPressed = false
@IBAction func decimal() {
userIsInTheMiddleOfTypingANumber = correct
if decimalIsPressed == false {
display.text = display.text! + \".\"
decimalIsPressed = true
}
}
@IBAction func pi() {
userIsInTheMiddleOfTypingANumber = correct
if display.text != \"0\" {
enter()
display.text =.
Many people do not realize that the Health Insurance Portability and.pdf
In a Central Office each of the DC-to-DC converter has a High Output Voltage Shutdown
feature and it occurs when the output increases past___of normal output (Circle one) 1% 5%
10% 25% T/F___One of the requirements within a Central Office specification includes Power
Noise Immunity and Emissions. There are A and 13 battery feeds required in all Central Office
environments because: (Circle all that apply) One feed cannot supply the required power Two
feeds are better than one In the event of power failure if one fails, second one can take over All
of the above None of the above The \"worst case\" voltage level requirements for low and high
voltage value re: (Circle one)
Solution
21 c) 10%
22 TransFormer
23 c) In the event of power failure if one fails, second one can take over.
In this unit, you have been asked to read and evaluate Multiple Inte.pdf
How many 5-card hands have a single pair and no 3-of-a-kind or 4-c a-kind? How many 5-card
hands have exactly a pair of aces?
Solution
Hi, I am Waqar. Please see below for detailed solution and lead to your answer.
(a)
This the hand with the pattern AABCD, where A, B, C and D are from the distinct \"kinds\" of
cards: aces, twos, threes, tens, jacks, queens, and kings
=> There are 13 kinds, and four of each kind, in the standard 52 card deck.
=> The number of such hands is (13-choose-1)*(4-choose-2)*(12-choose-3)*[(4-choose-1)]^3.
=> If all hands are equally likely, the probability of a single pair is obtained by dividing by (52-
choose-5).
=> This probability is 0.422569.
(b)
This hand has the pattern AABBC where A, B, and C are from distinct kinds.
=>The number of such hands is (13-choose-2)(4-choose-2)(4-choose-2)(11-choose-1)(4-choose-
1).
=>After dividing by (52-choose-5),
=> The probability is 0.047539.
Happy to help you
Happy Chegging.
In 2013, the Health Insurance Portability and Accountability Act (HI.pdf
Help me out with problem 4.3 please Consider the relation schema containing book data for a
bookstore: Book (title, author, isbn. publisher. pubDate. pubCity, qtyOnHand) a. Write out the
table for an instance of this relation. b. Identify a superkey, a candidate key, and the primary
key, writing out any assumptions you need to make to justify your choice.
Solution
a) instance for the given relation
(\"Formal Languages and Automata Theroy\",\"C K NAGPAL\",\"ISBN 0-19-807 106-
X\",\"Oxfor press\",\"05-07-2012\",\"London\",\"4\")
Title : Formal Languages and Automata Theroy
Author:C K NAGPAL
ISBN : ISBN 0-19-807 106-X
Publisher:Oxfor press
Pubdate:05-07-2012
Pubcity:London
QTYonhand : 4
b)
Primary key: is a column which can used to uniquely identify, a row in table
in the above relation primary key is isbn
because every unique isbn number, so that we can be used to uniquely identify a row
candidate key : is a column or set of columns which can uniquely identify a row in a table..
in the above relation canditate keys are isbn, [title,author,pubdate] are canditate keys;
by using them we can uniquely indentify a row
super key:- if we add any other column to primary key then it becomes super key
super keys are [isbn,title],[isbn,author],[isbn,publisher] etc.
Supporting (UKRI) OA monographs at Salford.pptx
How libraries can support authors with open access requirements for UKRI funded books
Wednesday 22 May 2024, 14:00-15:00.
Home assignment II on Spectroscopy 2024 Answers.pdf
Answers to Home assignment on UV-Visible spectroscopy: Calculation of wavelength of UV-Visible absorption
More Related Content
More from bharatchawla141
Which of the following are roles of proteins Pick ALL that apply..pdf
udent OECONOMICS (Summer 2018) \', Assessments\', Resources ? D2L Help\'. erly Collins:
Attempt 1 Question 12 (1 point) GraphA Graph B $5.50 $5.00 $5.00 4.50 Di Dz 40 50 40 50 ue
or False. The economic incidence of the tax is the same regardless of whether it is a sales tax or
an excise tax. (See Hint below.) Tr True False D View hint for Question 12 Save Page 12
Previous Pase Next Pazie
Solution
False.
Explanation:
Sales tax is a tax burden on consumer hence affect the demand curve as demand falls down.
(Graph B)
Excise tax is levied on producer affect the supply curve as supply falls down. (Graph A)
In both the cases equilibrium, quantity will decline. But in case of sales tax where demand is
affected, the prices go down and when excise duty is levied supply goes down, resulting in an
increase in prices..
When are a persons fellowship, autonomy, and competence face threa.pdf
True or False: The aDDM fixes the SV reference problem by assuming that when a subject looks
at the left symbol first, then the SV signal uses the left symbol as the reference point throughout
the entire decision making process.
Please explain
Solution
Answer:-
False
Explanation:-
In fixing the SV reference, ADDM interprets the header information returned by the various
protocols in order to make a decision; it does not assume when a subject looks at the left symbol..
What is the function in homworts Where can one find homwortsS.pdf
This is a homework assignment for Computer Architecture and some question use MIPS
Assembly language.
1. In the following MIPS assembly code, translate all the instructions to their corresponding
machine code in hexadecimal format. This code is stored in the memory from address
0x1fff0000.
Loop: sw $t1, 4($s0)
addi $t1, $t1, -1
sll $t1, $t1, 2
bne $t1, $s5, Exit
addi $s0, $s0, 4
j Loop
Exit: …
2. Find the MIPS instruction with the machine code 0x02108020.
3. Find the decimal value of the 2\'s complement number 0xffffffab.
4. Compile the following C code into MIPS:
i=0;
while (i<=100) do
A[4*i]=0;
where integer i is in register $s0 and the base memory address of array A is in$s1.
Solution
1.
Loop: sw $t1, 4($s0)
The syntax is: SW rt, offset(base)
SW - 101011
rt - 01001
base - 10000
offset - 4 - 0000000000000100
So,the binary instruction is: 101011 10000 01001 0000000000000100
And its hex equivalent is: 0xAE090004
addi $t1, $t1, -1
The syntax is: ADDI rt, rs, immediate
ADDI - 001000
rt - 01001
rs - 01001
immediate - 1111111111111111
So, the binary instruction is: 001000 01001 01001 1111111111111111
And its hex equivalent is: 0x2129FFFF
sll $t1, $t1, 2
The syntax is: SLL rd, rt, sa
SPECIAL - 000000
SLL - 000000
0 - 00000
rd - 01001
rt - 01001
sa - 00010
So, the instruction is: 000000 00000 01001 01001 00010 000000
And its hex equivalent is: 0x00094880
bne $t1, $s5, Exit
The syntax is: BNE rs, rt, offset
BNE - 000101
rs - 01001
rt - 10101
offset - 0000000000011000
So, the instruction is: 000101 01001 10101 0000000000011000
And its hex equivalent is: 0x15350018
addi $s0, $s0, 4
The syntax is: ADDI rt, rs, immediate
ADDI - 001000
rt - 10000
rs - 10000
immediate - 0000000000000100
So, the instruction is: 001000 10000 10000 0000000000000100
And its hex equivalent is: 0x22100004
j Loop
The syntax is: J target
J - 000010
target - 11111111110000000000000000
So, the instruction is: 000010 11111111110000000000000000
And its hex equivalent is: 0x0BFF0000
Exit: ….
This is the assignmentOBJECTIVESAfter finishing this lab, stude.pdf
Sustainability: Sustainability is an important consideration for any nation. Discuss what countries
do to sustain their economy and help its people.
Solution
Sustainable development is a crucial subject to affix downward since it beset so many
contrasting stuff.Due to the complication of this accountable it is big to attention at the big in a
holistic action that approaches affair intelligently.The authority for sustainab;e development at
the civil level that is for the difficult mosaic is a mixture of economic,political that precondition
be bring combine under a particular set of circumstances.Any changes in the people life style
makes a economic atmosphere and candid of championship and business will make a country
effort easy..
Two paragraph opinion about the film editing of the movie LIFE OF .pdf
The collection of emerald-cut diamonds contains replications, several diamonds at each weight.
Had we fit the linear equation using average prices at each weight rather than individual
diamonds, how would the fitted equation and summary measures (rsquared2 and se) change?
The slope would
increase significantly
and the intercept would
be approximately the same.
The value of
s Subscript ese
would
increase significantly
and
rsquared2
would
decrease significantly.
Solution
The slope would
increase significantly
the intercept would
be approximately the same.
The value of s e would increase significantly
rsquared2
decrease significantly..
True or False The aDDM fixes the SV reference problem by assuming t.pdf
The Baker Man sells rolls for $0.35 each. To help its salespeople, the company would like a table
showing the cost of rolls for orders of 1 to 2 rolls. use for loop flowchart.
Solution
double cost = 0.35;
printf ( \" Number of rolls \\t\" , \" Cost \ \");
for( i=1 ; i <= 2 ; i++)
{ printf ( \"\\t %i \\t\" , i , \" $ %d \ \" , i*cost ); }.
The number of visits to public libraries increased from 1.4 billion i.pdf
Solve the equation for x. x/3 = 3/4 = 3x + 6/12
Solution
Given :
x/3 - 3/4 = (3x+6) / 12
Taking LCM of L.H.S we get:
( 4x - 9 ) / 12 = (3x+6) / 12
cancel both of terms in denominators, we get:
4x - 9 = 3x+6
4x - 3x = 6 + 9
4x - 3x = 15
x = 15 [ Answer ]
Now check the solution, we plug in the value of x in the given equation
15/3 - 3/4 = ( 3*15 + 6 )/ 12
5 - 3/4 = 51/12
(20-3)/4 = 51/12
17/4 = 17/4
Since, L.H.S = R.H.S, Hence our solution x = 15 is correct..
The first table contains data of the Student entry. Attributes are Si.pdf
say you have some pictures each 500 KB in size. Say you also go to a store and buy a new
desktop computer. Approximately how many pictures could you put on the hard disk, assuming
you could use all the space on the disk for your pictures? there is a range of possible answers;
you must use a hard disk size that is reasonable for a new desktop computer. show arithmetic.
Solution
say if u purchase a 1 GB hard disk,then 1 GB = 1000MB=10^6 KB ,so each 500 KB size then u
can store upto 10^6/500 =2000 photos.
similarly 1 TB HArd disk=1000GB = 10^9 KB= no of pictures can be stored is 2*10^6 ...
Save for Later 12) Viruses, adware and spyware are referred to collec.pdf
Portia Company is a retailer of hammers Portia pays $4.75 for each hammer and sells them for
$8.00. Monthiy fixed costs are $26,000. The hammer cost is the only variable cost a. What is the
contribution margin per unit? (Round your answer to 2 decimal places.) per Unit b. What is the
break-even point in units? (Do not round intermediate calculations.) Units c. How many units
will Portia need to sell to earn target profit of $13,000? (Do not round intermediate calculations.)
Solution
a. Contribution margin = $8.00 - $4.75 = $3.25 per unit
b. Break-even point = $26,000 / ($8.00 - $4.75) = 8,000 units
c. Total number of units = ($26,000 + $13,000) / ($8.00 - $4.75) = 12,000 units.
Sustainability Sustainability is an important consideration for any.pdf
Question: Consider formulas (B.32) and (B.33). Let X stand for the rate of return on a security,
say, IBM, and Ythe rate of return on another security, say, General Foods. Let Let sk = 16, = 9,
and r=-08. What is the variance of (X + Y) in this case? Is it greater than or smaller than var (X)
+ var (Y)? In this instance, is it better to invest equally in the two securities (i.e., diversify) than
in either security exclusively? This problem is the essence of the portfolio theory of finance.
(See, for example, Richard Brealey and Stewart Myers, Principles of Corporate Finance,
McGraw-Hill, New York, latest edition.) Myers, Principles of Corporate Finance, McGraw-Hill,
New York, atest edition.)
Solution
given var(x) = 16 and var(y) = 9.and correlation coefficient r = -0.8
stndrd deviation of x = 4,y= 3.
var(x+y) = 16 + 9 - 2X0.8X12 = 25 - 19.2 = 5.8 < var (x) +var(y)
it is better to invest in both X and Y securities.
Research health data stewardship and in your post show why it is imp.pdf
Please select the best/correct answer for each question:
1. The bandwidth of the BPX 65 photodiode reverse biased at 5V is about _____ kHz.
A) 20
B) 30
C) 40
D) 50
2. The wavelength of a photon having an energy of 3.0ev is about ______ nm.
A) 400
B) 500
C) 800
D) 1100
3. At about 0V reverse bias, the BPX 65 photodiode has a junction capacitance of about _____
pF.
A) 5
B) 10
C) 15
D) 20
Solution
1Ans: B ie. 30KHz
2Ans: D ie 1100nm
3 Ans: D ie. 20pF.
Read carefully. Im not sure if the point class is correct but postin.pdf
Please explain what\'s Zombie Process.
Solution
zombie process is a process state when the child dies before the parent process,
in this case the structural information of the process is still in the process table.
when a process finishes execution,it will have an exit status to report to its parent process.
because of this last little bit of information,the process will remain in the operating system\'s
process table as a zombie process.indicating that it is not
to be schedule for further execution,but that it cannot be completly removed untill it has been
determined that the exit status is no longer needed..
Powell and three companions attended a rock concert performed by Joh.pdf
Module 02 Discussion 2 - McCarthyism
Define the \"McCarthyism\". Explain how this term was created. How did McCarthyism affect
Hollywood during the cold war era?
Module 02 Discussion 2 - McCarthyism
Define the \"McCarthyism\". Explain how this term was created. How did McCarthyism affect
Hollywood during the cold war era?
Module 02 Discussion 2 - McCarthyism
Define the \"McCarthyism\". Explain how this term was created. How did McCarthyism affect
Hollywood during the cold war era?
Solution
McCarthyism: McCarthyism is defined as the opposition to communists religion shown by
Senator Joseph R McCarthy and his supporters, in the period of 1940 to 1954 in US nation. This
period is known as McCarthyism period.
This term was created based on the role and work carried out by the Senator Josesh R McCarthy
and hid supporter in the US nation during the 1940 to 1954 time period. Since the work was
leaded by Mr. J R McCarthy, so based on his name this word is derived as McCarthyism.
During the McCarthyism time period, it also affects the Hollywood during that time. Since this
was against the communists, so around 10 people which were engaged in the film making at
Hollywood were removed from film making at Hollywood, and later they were sentenced to jail.
These people were good screen players and film writer, but these were not let for work in
Hollywood. The McCarthyism had the impact at the Hollywood also..
Please answer in MIPS assembly language only. Write the following ne.pdf
Let\'s focus on the business publications (WSJ, Forbes, Fortune, Business Week etc.) this week.
Please find at least three current articles that are about firms that relate to one or more of the
following strategies:
Innovation - incremental or disruptive
Entrepreneurship
International strategies employed by a firm
Outsourcing
International Financial transaction and/or risk
Market Matrix - (BCG Model) for portfolio management
Discuss how the articles chosen tie to this week’s chapter readings of competitive value and
entrepreneurial strategies.
Please include either the actual PDF of the article or the link to so so that your colleagues can
access the information and provide feedback that is more informed. I look forward to reading
your postings and collegial feedback.
Solution
THe following are tge articles you can refer to related to innovation in business world.
1.https://www.forbes.com>2017/06/17
Article on Why companies must align Innovation strategy with business strategy.
2.https://www.ijsv.net>article
Implications of Globalization for International Business Strategy.
3.Https://www.nytimes.com>technology
Hotspot for technology Outsourcing:The United States-The New York Times.
Oxygen and ozone form the equilibrium below. The partial pressure of.pdf
Lawrence Technological University
Engineering Technology Department
Manufacturing Engineering Processes (TIE3063)
Instructions: Type your answers to the following questions (no hand-written).
Assembly Line Methods
1. An assembly line is a manufacturing process in which interchangeable parts are added to
a product to create ___________.
a. a station
b. an end product
c. a separate module
2. ____________limitations can have a big impact on a small business’s blueprint for
introducing or improving assembly line methods.
People
Government
Capital
3. The ________ assembly methodology is designed to improve throughput by increasing
the efficiency of parallel subassembly lines feeding into the final assembly line.
a. cell manufacturing
b. modular assembly
c. U-shaped assembly line
4. This ________ method has evolved out of increased ability of machines to perform
multiple tasks.
a. cell manufacturing
b. modular assembly
c. U-shaped assembly line
5. On ________ workers are collected on the inside of the curve and communication is
easier than along the length of a straight line.
a. cell manufacturing
b. modular assembly
c. U-shaped assembly line
6. When choosing an assembly system, it is important to understand the ________ for the
product you’re assembling and how you can justify the costs associated with its process
improvement.
products
goals
workstations
7. _________ systems are used when their products don’t lend themselves to automation.
Manual Semi-automatic
Semi-automated
Fully-automated
8. _________ are useful for companies that need to improve their manufacturing process,
but aren’t able to completely remove the operator assistance.
Manual Semi-automatic
Semi-automated
Fully-automated
9. Assembly line automation is a process that calls for making use of equipment to manage
________ along the assembly line that were once managed by employees.
quality
tasks
workstations
List the classification of the four classical and one new manufacturing system designs ?
NO HAND-WRIITEN
1. An assembly line is a manufacturing process in which interchangeable parts are added to
a product to create ___________.
a. a station
b. an end product
c. a separate module
2. ____________limitations can have a big impact on a small business’s blueprint for
introducing or improving assembly line methods.
People
Government
Capital
3. The ________ assembly methodology is designed to improve throughput by increasing
the efficiency of parallel subassembly lines feeding into the final assembly line.
a. cell manufacturing
b. modular assembly
c. U-shaped assembly line
4. This ________ method has evolved out of increased ability of machines to perform
multiple tasks.
a. cell manufacturing
b. modular assembly
c. U-shaped assembly line
5. On ________ workers are collected on the inside of the curve and communication is
easier than along the length of a straight line.
a. cell manufacturing
b. modular assembly
c. U-shaped assembly line
6. When choosing an assembly system, it is impor.
Part A Spacecraft instruments measure the radiation from an asteroid,.pdf
Let A be an n times m matrix, let vector b elementof E^n and let vector u, vector w, (both in
E^m) be solutions to the matrix equation A vector x = vector b. 1 If vector v = vector u - vector
w use the properties of matrix multiplication to show that: A(t vector v) = vector 0_E^n for any
real number t. vector u + t vector v is a solution to the matrix equation A vector x = vector b for
any real number t.
Solution
1.
A(tv)=tAv=tA(u-w)=tAu-tAw=tb-tb=0
We used the linearity of matrix multiplication here.
2.
A(u+tv)=Au+A(tv)=b+0=b
HEre we used: A(tv)=0 for any real number t from part 1.
Hence proved.
LymeDisease1.–What is the disease called -- explain what the name .pdf
Implement a calculator (not postfix notation) using Swift Programming Language(Swift 3, basic
ios app). Please use MVC model(CalculatorBrain.swift can be the model and
ViewController.swift can be the view). Also please post the sreenshot of the storyboard that you
make.
Requirements:
Implement add subtract, multiply, divide, pi, sqrt, Euler’s natural number (e), co-sine and equals.
Ensure you have the ability to handle multiple operations in sequence
Implement the ability to enter floating point numbers into the display
Add 4 more buttons (ex. sine)
Handle multiple operations in a sequence.
Add a memory function to your calculator that stores and retrieves a number. Implement the
following buttons at the top of the keyboard
MC = Memory clear sets memory to 0
MR – Memory recall uses the number in memory acting as it you typed that number in yourself
MS – Memory Store puts the number on display into memory
M+ – Memory takes the number on the display, adds it to the memory, and puts the result into
memory.
Implement a clear (C) button. If the clear button is pressed once, it should take whatever was
typed before the last enter and put it to 0. If the clear is entered twice, it should clear the stack.
Show the history of every operand and operation input by displaying it.
Solution
import UIKit
class ViewController: UIViewController {
@IBOutlet weak var display: UILabel!
@IBOutlet weak var history: UILabel!
var userIsInTheMiddleOfTypingANumber = false
let x = M_PI
@IBAction func appendDigit(sender: UIButton) {
let digit = sender.currentTitle!
if userIsInTheMiddleOfTypingANumber {
display.text = display.text! + digit
} else {
display.text = digit
userIsInTheMiddleOfTypingANumber = true
}
}
@IBAction func operate(sender: UIButton) {
let operation = sender.currentTitle!
switch operation
{
case \"×\": performOperation { $0 * $1 }
case \"÷\": performOperation { $1 / $0 }
case \"+\": performOperation { $0 + $1 }
case \"\": performOperation { $1 - $0 }
case \"\": performOperation { sqrt($0) }
case \"sin\": performOperation { sin($0) }
case \"cos\": performOperation { cos($0) }
default: break
}
}
func performOperation(operation: (Double, Double) -> Double)
{
if operandStack.count >= 2
{
displayValue = operation(operandStack.removeLast(), operandStack.removeLast())
enter()
}
}
func performOperation(operation: (Double) -> Double) {
if operandStack.count >= 1 {
displayValue = operation(operandStack.removeLast())
enter()
}
}
var operandStack = Array()
@IBAction func enter() {
userIsInTheMiddleOfTypingANumber = false
decimalIsPressed = false
operandStack.append(displayValue)
history.text = \"\\(displayValue)\"
println(\"operandStack = \\(operandStack)\")
}
var decimalIsPressed = false
@IBAction func decimal() {
userIsInTheMiddleOfTypingANumber = correct
if decimalIsPressed == false {
display.text = display.text! + \".\"
decimalIsPressed = true
}
}
@IBAction func pi() {
userIsInTheMiddleOfTypingANumber = correct
if display.text != \"0\" {
enter()
display.text =.
Many people do not realize that the Health Insurance Portability and.pdf
In a Central Office each of the DC-to-DC converter has a High Output Voltage Shutdown
feature and it occurs when the output increases past___of normal output (Circle one) 1% 5%
10% 25% T/F___One of the requirements within a Central Office specification includes Power
Noise Immunity and Emissions. There are A and 13 battery feeds required in all Central Office
environments because: (Circle all that apply) One feed cannot supply the required power Two
feeds are better than one In the event of power failure if one fails, second one can take over All
of the above None of the above The \"worst case\" voltage level requirements for low and high
voltage value re: (Circle one)
Solution
21 c) 10%
22 TransFormer
23 c) In the event of power failure if one fails, second one can take over.
In this unit, you have been asked to read and evaluate Multiple Inte.pdf
How many 5-card hands have a single pair and no 3-of-a-kind or 4-c a-kind? How many 5-card
hands have exactly a pair of aces?
Solution
Hi, I am Waqar. Please see below for detailed solution and lead to your answer.
(a)
This the hand with the pattern AABCD, where A, B, C and D are from the distinct \"kinds\" of
cards: aces, twos, threes, tens, jacks, queens, and kings
=> There are 13 kinds, and four of each kind, in the standard 52 card deck.
=> The number of such hands is (13-choose-1)*(4-choose-2)*(12-choose-3)*[(4-choose-1)]^3.
=> If all hands are equally likely, the probability of a single pair is obtained by dividing by (52-
choose-5).
=> This probability is 0.422569.
(b)
This hand has the pattern AABBC where A, B, and C are from distinct kinds.
=>The number of such hands is (13-choose-2)(4-choose-2)(4-choose-2)(11-choose-1)(4-choose-
1).
=>After dividing by (52-choose-5),
=> The probability is 0.047539.
Happy to help you
Happy Chegging.
In 2013, the Health Insurance Portability and Accountability Act (HI.pdf
Help me out with problem 4.3 please Consider the relation schema containing book data for a
bookstore: Book (title, author, isbn. publisher. pubDate. pubCity, qtyOnHand) a. Write out the
table for an instance of this relation. b. Identify a superkey, a candidate key, and the primary
key, writing out any assumptions you need to make to justify your choice.
Solution
a) instance for the given relation
(\"Formal Languages and Automata Theroy\",\"C K NAGPAL\",\"ISBN 0-19-807 106-
X\",\"Oxfor press\",\"05-07-2012\",\"London\",\"4\")
Title : Formal Languages and Automata Theroy
Author:C K NAGPAL
ISBN : ISBN 0-19-807 106-X
Publisher:Oxfor press
Pubdate:05-07-2012
Pubcity:London
QTYonhand : 4
b)
Primary key: is a column which can used to uniquely identify, a row in table
in the above relation primary key is isbn
because every unique isbn number, so that we can be used to uniquely identify a row
candidate key : is a column or set of columns which can uniquely identify a row in a table..
in the above relation canditate keys are isbn, [title,author,pubdate] are canditate keys;
by using them we can uniquely indentify a row
super key:- if we add any other column to primary key then it becomes super key
super keys are [isbn,title],[isbn,author],[isbn,publisher] etc.
More from bharatchawla141 (20)
Which of the following are roles of proteins Pick ALL that apply..pdf
Which of the following are roles of proteins Pick ALL that apply..pdf
When are a persons fellowship, autonomy, and competence face threa.pdf
When are a persons fellowship, autonomy, and competence face threa.pdf
What is the function in homworts Where can one find homwortsS.pdf
What is the function in homworts Where can one find homwortsS.pdf
This is the assignmentOBJECTIVESAfter finishing this lab, stude.pdf
This is the assignmentOBJECTIVESAfter finishing this lab, stude.pdf
Two paragraph opinion about the film editing of the movie LIFE OF .pdf
Two paragraph opinion about the film editing of the movie LIFE OF .pdf
True or False The aDDM fixes the SV reference problem by assuming t.pdf
True or False The aDDM fixes the SV reference problem by assuming t.pdf
The number of visits to public libraries increased from 1.4 billion i.pdf
The number of visits to public libraries increased from 1.4 billion i.pdf
The first table contains data of the Student entry. Attributes are Si.pdf
The first table contains data of the Student entry. Attributes are Si.pdf
Save for Later 12) Viruses, adware and spyware are referred to collec.pdf
Save for Later 12) Viruses, adware and spyware are referred to collec.pdf
Sustainability Sustainability is an important consideration for any.pdf
Sustainability Sustainability is an important consideration for any.pdf
Research health data stewardship and in your post show why it is imp.pdf
Research health data stewardship and in your post show why it is imp.pdf
Read carefully. Im not sure if the point class is correct but postin.pdf
Read carefully. Im not sure if the point class is correct but postin.pdf
Powell and three companions attended a rock concert performed by Joh.pdf
Powell and three companions attended a rock concert performed by Joh.pdf
Please answer in MIPS assembly language only. Write the following ne.pdf
Please answer in MIPS assembly language only. Write the following ne.pdf
Oxygen and ozone form the equilibrium below. The partial pressure of.pdf
Oxygen and ozone form the equilibrium below. The partial pressure of.pdf
Part A Spacecraft instruments measure the radiation from an asteroid,.pdf
Part A Spacecraft instruments measure the radiation from an asteroid,.pdf
LymeDisease1.–What is the disease called -- explain what the name .pdf
LymeDisease1.–What is the disease called -- explain what the name .pdf
Many people do not realize that the Health Insurance Portability and.pdf
Many people do not realize that the Health Insurance Portability and.pdf
In this unit, you have been asked to read and evaluate Multiple Inte.pdf
In this unit, you have been asked to read and evaluate Multiple Inte.pdf
In 2013, the Health Insurance Portability and Accountability Act (HI.pdf
In 2013, the Health Insurance Portability and Accountability Act (HI.pdf
Recently uploaded
Supporting (UKRI) OA monographs at Salford.pptx
How libraries can support authors with open access requirements for UKRI funded books
Wednesday 22 May 2024, 14:00-15:00.
Home assignment II on Spectroscopy 2024 Answers.pdf
Answers to Home assignment on UV-Visible spectroscopy: Calculation of wavelength of UV-Visible absorption
Honest Reviews of Tim Han LMA Course Program.pptx
Personal development courses are widely available today, with each one promising life-changing outcomes. Tim Han’s Life Mastery Achievers (LMA) Course has drawn a lot of interest. In addition to offering my frank assessment of Success Insider’s LMA Course, this piece examines the course’s effects via a variety of Tim Han LMA course reviews and Success Insider comments.
CLASS 11 CBSE B.St Project AIDS TO TRADE - INSURANCE
Class 11 CBSE Business Studies Project ( AIDS TO TRADE - INSURANCE)
The geography of Taylor Swift - some ideas
Geographical themes connected with Taylor Swift's ERAS tour - coming to the UK in June 2024
"Protectable subject matters, Protection in biotechnology, Protection of othe...
Protectable subject matters, Protection in biotechnology, Protection of other biological materials, Ownership and period of protection
Embracing GenAI - A Strategic Imperative
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Introduction to AI for Nonprofits with Tapp Network
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Event Link:-
https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-exploring-gemini-ai-and-integration-with-mulesoft/
Agenda
● Java 17 Upgrade Overview
● Why and by when do customers need to upgrade to Java 17?
● Is there any immediate impact to upgrading to Mule Runtime 4.6 and beyond?
● Which MuleSoft products are in scope?
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/
YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Shyam Raj Prasad-
https://www.linkedin.com/in/shyam-raj-prasad/
A Strategic Approach: GenAI in Education
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH ANSWERS.
1.4 modern child centered education - mahatma gandhi-2.pptx
Child centred education is an educational approach that priorities the interest, needs and abilities of the child in the learning process.
How to Make a Field invisible in Odoo 17
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Unit 2- Research Aptitude (UGC NET Paper I).pdf
This slide describes the research aptitude of unit 2 in the UGC NET paper I.
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...Nguyen Thanh Tu Collection
https://app.box.com/s/hqnndn05v4q5a4k4jd597rkdbda0fniiRecently uploaded (20)
Home assignment II on Spectroscopy 2024 Answers.pdf
Home assignment II on Spectroscopy 2024 Answers.pdf
CLASS 11 CBSE B.St Project AIDS TO TRADE - INSURANCE
CLASS 11 CBSE B.St Project AIDS TO TRADE - INSURANCE
Adversarial Attention Modeling for Multi-dimensional Emotion Regression.pdf
Adversarial Attention Modeling for Multi-dimensional Emotion Regression.pdf
"Protectable subject matters, Protection in biotechnology, Protection of othe...
"Protectable subject matters, Protection in biotechnology, Protection of othe...
Introduction to AI for Nonprofits with Tapp Network
Introduction to AI for Nonprofits with Tapp Network
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
1.4 modern child centered education - mahatma gandhi-2.pptx
1.4 modern child centered education - mahatma gandhi-2.pptx
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...
Differentiate between analog and digital signals.SolutionIn ana.pdf
- 1. Differentiate between analog and digital signals. Solution In analog signal, the information is translated into electric pulses, and therefore, it will be continuous. In digital signal, the information is translated into binary signals which could be either 0, or 1, but when interpreting it will be re-converted back to analog form. In analog signal, the data is in sine wave, whereas, in digital signal, the data is represented in square wave.