DG cement exprnc
•
0 likes•129 views
This document is a work reference letter for Mr. Kamran Yousaf from D.G. Khan Cement Company Limited. It certifies that Mr. Yousaf worked as an Electrical Engineer from 2011 to 2013. It describes his responsibilities, which included working with PLC and DCS systems, control system programming, data acquisition, fiber optic installation, SCADA programming, and participating in shutdown and maintenance activities. The letter recommends Mr. Yousaf as a versatile electrical engineer and wishes him good luck in his future endeavors.
Report
Share
Report
Share
Download to read offline
Recommended
kashif cv
Kashif Rehman is a graduate in Electrical Engineering from Bahauddin Zakariya University in Pakistan. He has over 3 years of experience working as an Assistant Engineer and Electrical Engineer. His objective is to apply his knowledge and skills at a challenging organization to enhance his abilities. He is proficient in AutoCAD, Microsoft Office, and has experience designing low and high voltage electrical panels, commissioning equipment, and testing protection relays.
NEW CV
Vivek Kumar Singh is seeking senior level assignments in areas like mechanized tunnelling, energy management, and project management. He has nearly 8 years of experience in electrical engineering roles including energy planning, operations and maintenance, installation and commissioning. He is experienced in areas like electrical energy management, cable scheduling, process enhancement, and team management. He has expertise in coordinating projects, implementing changes, and leading teams. His most recent role was as a Senior Deputy Manager for Coastal Projects Ltd. where he managed tunnelling projects and electrical systems including high voltage installations.
hassan1 Electrical Engineer
Hassan Ali Ali Ali Mansour is an electrical engineer seeking a challenging career in design and maintenance management. He has a M.Sc. in Electrical Power and Machines Engineering from Alex University in Egypt and over 10 years of experience in electrical engineering, design, and maintenance in oil and gas plants. Currently he works as an Electrical Engineer in the Asset Engineering Department at SHARQ-SABIC in Saudi Arabia, where his responsibilities include technical support, turnaround maintenance, design change requests, and asset performance management.
A high step down multiple output converter with wide input voltage range base...
A high step down multiple output converter with wide input voltage range based on quasi two-stage architecture and dual-output llc resonant converter
Do Your Projects With Technology Experts...
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Introduction
Bhalerao Electricals provides electrical contracting services for maintenance, erection, testing and commissioning of substations, transformers, power plants, and industrial electrical panels. They have 18 years of experience in projects related to infrastructure, industries and power plants. Their services include installation, testing and commissioning of high voltage equipment, switchgear panels, control cubicles, transformers, and more. They also provide annual maintenance contracts, panel design, testing instruments, and have experience with projects for clients such as Uflex Limited and Bajaj Electricals.
Asad Ali Shah cv
This document contains personnel information and work history for Asad Ali Shah, including his contact information, qualifications, skills, and 12 years of experience working as an electrical supervisor on various projects in Pakistan, UAE, and Saudi Arabia. Shah has experience supervising installations, testing, and commissioning of electrical equipment such as substations, transformers, generators, and switchgear. He is proficient in English, Arabic, Urdu, and Pashto and has skills in areas like cable testing, electrical drawings, and maintenance/troubleshooting of low and high voltage systems.
Electrical Engineer
Ibrahim G. Gharaibeh is an electrical engineer seeking new employment with over 6 years of experience as a site and quality control engineer on infrastructure projects in Jordan and Saudi Arabia. He currently works as a quality control electrical engineer for the Saudi Ministry of Housing, where he checks electrical designs and ensures compliance with standards. Previously he worked as an electrical site engineer and quality control engineer on construction projects in Jordan. He holds a BSc in Electrical Engineering and various professional certifications.
My Resume
This document is a resume for Justin Kent Hill that outlines his education, certifications, skills, and work history. Hill has an Associate's degree in electronics from ITT Technical Institute and multiple TVPPA lineman apprentice certifications. His work experience includes positions as a high voltage technician maintaining neutral beam systems, a wireless communications installer, a journeyman lineman, and a machine operator. Hill has skills in areas such as welding, Microsoft Office, safety regulations, and electrical and electronic maintenance and testing.
Recommended
kashif cv
Kashif Rehman is a graduate in Electrical Engineering from Bahauddin Zakariya University in Pakistan. He has over 3 years of experience working as an Assistant Engineer and Electrical Engineer. His objective is to apply his knowledge and skills at a challenging organization to enhance his abilities. He is proficient in AutoCAD, Microsoft Office, and has experience designing low and high voltage electrical panels, commissioning equipment, and testing protection relays.
NEW CV
Vivek Kumar Singh is seeking senior level assignments in areas like mechanized tunnelling, energy management, and project management. He has nearly 8 years of experience in electrical engineering roles including energy planning, operations and maintenance, installation and commissioning. He is experienced in areas like electrical energy management, cable scheduling, process enhancement, and team management. He has expertise in coordinating projects, implementing changes, and leading teams. His most recent role was as a Senior Deputy Manager for Coastal Projects Ltd. where he managed tunnelling projects and electrical systems including high voltage installations.
hassan1 Electrical Engineer
Hassan Ali Ali Ali Mansour is an electrical engineer seeking a challenging career in design and maintenance management. He has a M.Sc. in Electrical Power and Machines Engineering from Alex University in Egypt and over 10 years of experience in electrical engineering, design, and maintenance in oil and gas plants. Currently he works as an Electrical Engineer in the Asset Engineering Department at SHARQ-SABIC in Saudi Arabia, where his responsibilities include technical support, turnaround maintenance, design change requests, and asset performance management.
A high step down multiple output converter with wide input voltage range base...
A high step down multiple output converter with wide input voltage range based on quasi two-stage architecture and dual-output llc resonant converter
Do Your Projects With Technology Experts...
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Introduction
Bhalerao Electricals provides electrical contracting services for maintenance, erection, testing and commissioning of substations, transformers, power plants, and industrial electrical panels. They have 18 years of experience in projects related to infrastructure, industries and power plants. Their services include installation, testing and commissioning of high voltage equipment, switchgear panels, control cubicles, transformers, and more. They also provide annual maintenance contracts, panel design, testing instruments, and have experience with projects for clients such as Uflex Limited and Bajaj Electricals.
Asad Ali Shah cv
This document contains personnel information and work history for Asad Ali Shah, including his contact information, qualifications, skills, and 12 years of experience working as an electrical supervisor on various projects in Pakistan, UAE, and Saudi Arabia. Shah has experience supervising installations, testing, and commissioning of electrical equipment such as substations, transformers, generators, and switchgear. He is proficient in English, Arabic, Urdu, and Pashto and has skills in areas like cable testing, electrical drawings, and maintenance/troubleshooting of low and high voltage systems.
Electrical Engineer
Ibrahim G. Gharaibeh is an electrical engineer seeking new employment with over 6 years of experience as a site and quality control engineer on infrastructure projects in Jordan and Saudi Arabia. He currently works as a quality control electrical engineer for the Saudi Ministry of Housing, where he checks electrical designs and ensures compliance with standards. Previously he worked as an electrical site engineer and quality control engineer on construction projects in Jordan. He holds a BSc in Electrical Engineering and various professional certifications.
My Resume
This document is a resume for Justin Kent Hill that outlines his education, certifications, skills, and work history. Hill has an Associate's degree in electronics from ITT Technical Institute and multiple TVPPA lineman apprentice certifications. His work experience includes positions as a high voltage technician maintaining neutral beam systems, a wireless communications installer, a journeyman lineman, and a machine operator. Hill has skills in areas such as welding, Microsoft Office, safety regulations, and electrical and electronic maintenance and testing.
AHCENE RESUME FINAL
Ahcene Boudjema has over 15 years of experience as a GSM network technician and machine operator. He has extensive experience commissioning and installing telecom equipment for GSM networks in Algeria, including rectifiers, power supplies, batteries, distribution frames, and base transceiver stations. Currently, he works as a machine operator at Spx Cooling Technologies in Olathe, Kansas, where he operates precision machinery and ensures high quality production. He is proficient in GSM, DCS, transmission systems, radio links, and software like B7, B8, B9, and B10.
DGK - Resume (Final)
Danish Gul Khan is an electrical engineer from Pakistan with over 7 years of experience. He has a Master's degree in Electrical Engineering and has worked on projects involving electrical system design, transmission and distribution, substation maintenance, and smart grid implementation. His experience includes working as an Assistant Manager at K Electric and as an Assistant Superintendent at Karachi Shipyard and Engineering Works.
Anika puri_Resume_Telecom_New
Anika Puri has over 5 years of experience as a Senior Network Engineer and RF Engineer. She has worked on projects for Ericsson in the US and France, including call recovery work for AT&T and a vendor swap project for Orange France. She is seeking a position that allows her to apply her technical skills and experience in cellular communications.
Cv Imad Sharif
This document contains personal and employment details of Imad Shereef Sabah. It summarizes that he has 15 years of MEP engineering experience in Dubai working on infrastructure projects and high-rise buildings. Some of his roles included being MEP Manager for 8 years at Al Khattal General Contracting in Dubai and previously working as a Senior Electrical Engineer and Project Manager in Iraq. He has a bachelor's degree in electrical power engineering and certifications in project management, MEP planning, and Primavera software.
SHIVA RAJU ARAPALLY CV
This document summarizes the experience of Shiva Raju Arapally, a project engineer with 3 years of experience in electrical and instrumentation installation, testing, commissioning, and project handover. He has worked on multiple projects in India and has expertise in controllers, sensors, fire alarm panels, transformers, and more. He holds an MSc in Electrical and Electronics Engineering from the University of East London.
KAPIL.Oct
Kapil Kumar Singh is seeking a position as a Control and Instrumentation Engineer with over 6 years of experience in thermal power plants. He has extensive experience with DCS systems like Yokogawa, ABB, and Siemens, as well as PLC programming. His responsibilities have included maintenance, calibration, commissioning, and troubleshooting of field instruments, control systems, and other equipment. He is looking to contribute his skills and experience to help organizations achieve their goals.
cv ehab
Ehab Ataa Sbeat is an Iraqi electrical engineer with experience maintaining electrical systems at gas power plants in Iraq. He has over 10 years of experience supervising electrical installation works, performing quality control checks, planning work schedules, and procurement. His roles have included supervisor engineer, QC engineer, planning engineer, and member of procurement and invoice committees. He also owned a control panel workshop and worked as an administration clerk earlier in his career. His skills include computer programs, English language ability, and dealing with diverse groups of people.
Sujit Das
Sujit Das has 12 years of experience in electrical engineering and automation systems for process plants, machine tools industries, and substations. He has expertise in PLC programming, SCADA development, CNC systems, servo drives, VFD drives, and designing electrical systems. Some of his responsibilities include designing, installing, and commissioning automation, electrical, and power management systems for various industries. He is proficient in software such as Eplan, AutoCAD, Solid Edge, and PLC programming packages from Siemens and GE Fanuc.
CV_Meraj_Electrical_Foreman
Syed Meraj is applying for an electrical technician or foreman position in the oil and gas field. He has over 13 years of experience as an electrical technician in various oil, gas, and construction companies in India, UAE, Qatar, Saudi Arabia, and other Gulf countries. His experience includes maintenance, troubleshooting, and testing of electrical equipment operating from low to high voltages, such as generators, switchgears, motors, transformers, UPS systems, and more. He has worked extensively with hazardous electrical systems.
Sandeep cv
It shows my skills & my experience with all the details of the project i had accomplished.it also highlights certification program that i had undertaken in past few years.
To develope and design compensator system
This document describes the development and design of a compensator system. It includes an abstract, introduction, literature review, working algorithm, output analysis, and applications. The project involves designing lead, lag, and lead-lag compensators using passive elements like resistors and capacitors. The response of the designed system is analyzed using an oscilloscope. The compensators are able to improve the stability and performance of control systems. Some key effects of compensators like changes in gain crossover frequency and phase crossover frequency are demonstrated. Applications include areas like robotics and automobile diagnostics.
Senior Electrical Engineer CV
This document contains the resume of Hosam El Banna, an electrical power engineer. It summarizes his qualifications and 20 years of experience in electrical design, maintenance, project management, and training. It lists his roles with various companies in Saudi Arabia and Egypt, managing electrical works for water treatment plants, pumping stations, and hospitals. It also provides details of his educational background and professional affiliations.
Flyer
Automation & Electronics, Inc. is an industrial electrical design and build contractor that has been in business since 1956. They provide engineering, programming, electrical contracting, and technical services for automation and communication systems. Their services include electrical system design, automation systems, process control upgrades, and products for facilities such as rail, chemical injection, and midstream infrastructure. As a vertically integrated company, they are able to handle projects from conception to completion with in-house specialists.
Arman, Resume - edited - Copy
Mr. Armando L. Doria II is applying for the position of Document Controller or Electrical Line Mechanic/Electrician. He has over 12 years of experience as an electrical distribution lineman and foreman in the Philippines and Qatar. He holds a Bachelor's degree in Mechanical Engineering and electrical licenses. His skills include document control, overhead line maintenance, inspection and repair, and electrical installation and wiring.
Amjad Dar_ CV pic Mobily 15y
Amjad Masood Dar has over 15 years of experience managing telecommunications projects in Saudi Arabia. He is seeking a project management role involving planning, implementing, and overseeing the installation of 2G, 3G, 4G, and LTE networks. His experience includes managing indoor contractors, reviewing designs, ensuring quality standards are met, and handling documentation and reporting for infrastructure build sites. He is proficient in both active and passive antenna solutions and has worked with major telecom providers in Saudi Arabia and other countries.
Ziad .CV
This document is a curriculum vitae for Ziad Abdullh Mohammed Ahmed, an automation and electrical engineer from Yemen. It provides details about his education, work experience, skills, training, and qualifications. He has over 10 years of experience working on electrical and instrumentation projects in Yemen, Syria, and Libya for companies like Griffin Energy and HIGLOP. His roles have included engineering, supervising installation and commissioning of electrical systems, and preparing quotations and technical proposals. He has skills in PLC and HMI programming, AutoCAD, SCADA systems, and electrical design.
Electrical Engineer -Nabeel Cv (1)
Muhammad Nabeel Aslam is an electrical engineer with over 7 years of experience working in telecommunications. He has worked as a RAN engineer for Zhongxing Telecom Pakistan and as a BSS & Transmission engineer for Mobiserve Pvt. He has extensive experience commissioning, configuring, and troubleshooting various radio equipment including Ericsson RBS 6000 family and ZTE 8910 cabinets. He is proficient in technical software like Etap Electrical and has expertise in areas like transmission systems, rectifiers, and antenna systems.
Ravi Shankar_I&C Engineer
The document provides a resume for R. Ravi Shankar seeking a position as an Instrument & Control Engineer. It summarizes his 12 years of experience in instrumentation and control engineering roles for thermal and combined cycle power plants. His most recent role was as an Instrument Commissioning Engineer for a 2100MW combined cycle power plant project in Saudi Arabia, where he supported commissioning activities and troubleshot instrumentation issues. He has a bachelor's degree in electronics instrumentation and is proficient in DCS systems like Yokogawa Centum VP.
Usman khan Resume
Muhammad Usman Khan is an electrical engineer with over 7 years of experience in radio network optimization and radio frequency engineering. He has worked on 2G and 3G networks for Mobilink and Ericsson in Pakistan, monitoring KPIs, conducting drive tests, troubleshooting issues, and handling customer complaints. He holds a BSc in Electrical Engineering and is PEC registered.
JOHN- Senior Electrical engineer
John Britto is a Senior Electrical Engineer with over 9 years of experience in electrical maintenance and testing. He is seeking a position that allows him to utilize his expertise in testing and maintaining electrical equipment to enhance reliability and performance. He has worked in various roles for companies in Dubai and Abu Dhabi, including as an Electrical Maintenance Engineer for Al Maktoum International Airport and a Senior Electrical Engineer for Enova Facilities Management at Abu Dhabi International Airport. He has strong technical skills in electrical projects, maintenance, planning, and computer programs.
Ahmed Elsayed Salem CV
Ahmed Salem is an Egyptian electrical engineer seeking a project manager position. He has 15 years of experience managing electrical substation projects in Saudi Arabia and Egypt, including experience designing, testing, and commissioning high voltage equipment. His background includes designing transmission line schematics, configuring protection relays, and managing projects from conception to energization. He is proficient in English and Arabic and knowledgeable about computer design programs, project management software, and electrical engineering simulation tools.
CV
Abdul Gani has over 14 years of experience in testing, commissioning, and maintenance of signaling equipment, SCADA systems, and automation and control systems for railways. He has expertise in RTU configuration and testing, communication protocols, and power systems monitoring. His roles have included project engineering, system integration testing, and commissioning across various railway signaling and infrastructure projects in India.
More Related Content
What's hot
AHCENE RESUME FINAL
Ahcene Boudjema has over 15 years of experience as a GSM network technician and machine operator. He has extensive experience commissioning and installing telecom equipment for GSM networks in Algeria, including rectifiers, power supplies, batteries, distribution frames, and base transceiver stations. Currently, he works as a machine operator at Spx Cooling Technologies in Olathe, Kansas, where he operates precision machinery and ensures high quality production. He is proficient in GSM, DCS, transmission systems, radio links, and software like B7, B8, B9, and B10.
DGK - Resume (Final)
Danish Gul Khan is an electrical engineer from Pakistan with over 7 years of experience. He has a Master's degree in Electrical Engineering and has worked on projects involving electrical system design, transmission and distribution, substation maintenance, and smart grid implementation. His experience includes working as an Assistant Manager at K Electric and as an Assistant Superintendent at Karachi Shipyard and Engineering Works.
Anika puri_Resume_Telecom_New
Anika Puri has over 5 years of experience as a Senior Network Engineer and RF Engineer. She has worked on projects for Ericsson in the US and France, including call recovery work for AT&T and a vendor swap project for Orange France. She is seeking a position that allows her to apply her technical skills and experience in cellular communications.
Cv Imad Sharif
This document contains personal and employment details of Imad Shereef Sabah. It summarizes that he has 15 years of MEP engineering experience in Dubai working on infrastructure projects and high-rise buildings. Some of his roles included being MEP Manager for 8 years at Al Khattal General Contracting in Dubai and previously working as a Senior Electrical Engineer and Project Manager in Iraq. He has a bachelor's degree in electrical power engineering and certifications in project management, MEP planning, and Primavera software.
SHIVA RAJU ARAPALLY CV
This document summarizes the experience of Shiva Raju Arapally, a project engineer with 3 years of experience in electrical and instrumentation installation, testing, commissioning, and project handover. He has worked on multiple projects in India and has expertise in controllers, sensors, fire alarm panels, transformers, and more. He holds an MSc in Electrical and Electronics Engineering from the University of East London.
KAPIL.Oct
Kapil Kumar Singh is seeking a position as a Control and Instrumentation Engineer with over 6 years of experience in thermal power plants. He has extensive experience with DCS systems like Yokogawa, ABB, and Siemens, as well as PLC programming. His responsibilities have included maintenance, calibration, commissioning, and troubleshooting of field instruments, control systems, and other equipment. He is looking to contribute his skills and experience to help organizations achieve their goals.
cv ehab
Ehab Ataa Sbeat is an Iraqi electrical engineer with experience maintaining electrical systems at gas power plants in Iraq. He has over 10 years of experience supervising electrical installation works, performing quality control checks, planning work schedules, and procurement. His roles have included supervisor engineer, QC engineer, planning engineer, and member of procurement and invoice committees. He also owned a control panel workshop and worked as an administration clerk earlier in his career. His skills include computer programs, English language ability, and dealing with diverse groups of people.
Sujit Das
Sujit Das has 12 years of experience in electrical engineering and automation systems for process plants, machine tools industries, and substations. He has expertise in PLC programming, SCADA development, CNC systems, servo drives, VFD drives, and designing electrical systems. Some of his responsibilities include designing, installing, and commissioning automation, electrical, and power management systems for various industries. He is proficient in software such as Eplan, AutoCAD, Solid Edge, and PLC programming packages from Siemens and GE Fanuc.
CV_Meraj_Electrical_Foreman
Syed Meraj is applying for an electrical technician or foreman position in the oil and gas field. He has over 13 years of experience as an electrical technician in various oil, gas, and construction companies in India, UAE, Qatar, Saudi Arabia, and other Gulf countries. His experience includes maintenance, troubleshooting, and testing of electrical equipment operating from low to high voltages, such as generators, switchgears, motors, transformers, UPS systems, and more. He has worked extensively with hazardous electrical systems.
Sandeep cv
It shows my skills & my experience with all the details of the project i had accomplished.it also highlights certification program that i had undertaken in past few years.
To develope and design compensator system
This document describes the development and design of a compensator system. It includes an abstract, introduction, literature review, working algorithm, output analysis, and applications. The project involves designing lead, lag, and lead-lag compensators using passive elements like resistors and capacitors. The response of the designed system is analyzed using an oscilloscope. The compensators are able to improve the stability and performance of control systems. Some key effects of compensators like changes in gain crossover frequency and phase crossover frequency are demonstrated. Applications include areas like robotics and automobile diagnostics.
Senior Electrical Engineer CV
This document contains the resume of Hosam El Banna, an electrical power engineer. It summarizes his qualifications and 20 years of experience in electrical design, maintenance, project management, and training. It lists his roles with various companies in Saudi Arabia and Egypt, managing electrical works for water treatment plants, pumping stations, and hospitals. It also provides details of his educational background and professional affiliations.
Flyer
Automation & Electronics, Inc. is an industrial electrical design and build contractor that has been in business since 1956. They provide engineering, programming, electrical contracting, and technical services for automation and communication systems. Their services include electrical system design, automation systems, process control upgrades, and products for facilities such as rail, chemical injection, and midstream infrastructure. As a vertically integrated company, they are able to handle projects from conception to completion with in-house specialists.
Arman, Resume - edited - Copy
Mr. Armando L. Doria II is applying for the position of Document Controller or Electrical Line Mechanic/Electrician. He has over 12 years of experience as an electrical distribution lineman and foreman in the Philippines and Qatar. He holds a Bachelor's degree in Mechanical Engineering and electrical licenses. His skills include document control, overhead line maintenance, inspection and repair, and electrical installation and wiring.
Amjad Dar_ CV pic Mobily 15y
Amjad Masood Dar has over 15 years of experience managing telecommunications projects in Saudi Arabia. He is seeking a project management role involving planning, implementing, and overseeing the installation of 2G, 3G, 4G, and LTE networks. His experience includes managing indoor contractors, reviewing designs, ensuring quality standards are met, and handling documentation and reporting for infrastructure build sites. He is proficient in both active and passive antenna solutions and has worked with major telecom providers in Saudi Arabia and other countries.
Ziad .CV
This document is a curriculum vitae for Ziad Abdullh Mohammed Ahmed, an automation and electrical engineer from Yemen. It provides details about his education, work experience, skills, training, and qualifications. He has over 10 years of experience working on electrical and instrumentation projects in Yemen, Syria, and Libya for companies like Griffin Energy and HIGLOP. His roles have included engineering, supervising installation and commissioning of electrical systems, and preparing quotations and technical proposals. He has skills in PLC and HMI programming, AutoCAD, SCADA systems, and electrical design.
Electrical Engineer -Nabeel Cv (1)
Muhammad Nabeel Aslam is an electrical engineer with over 7 years of experience working in telecommunications. He has worked as a RAN engineer for Zhongxing Telecom Pakistan and as a BSS & Transmission engineer for Mobiserve Pvt. He has extensive experience commissioning, configuring, and troubleshooting various radio equipment including Ericsson RBS 6000 family and ZTE 8910 cabinets. He is proficient in technical software like Etap Electrical and has expertise in areas like transmission systems, rectifiers, and antenna systems.
Ravi Shankar_I&C Engineer
The document provides a resume for R. Ravi Shankar seeking a position as an Instrument & Control Engineer. It summarizes his 12 years of experience in instrumentation and control engineering roles for thermal and combined cycle power plants. His most recent role was as an Instrument Commissioning Engineer for a 2100MW combined cycle power plant project in Saudi Arabia, where he supported commissioning activities and troubleshot instrumentation issues. He has a bachelor's degree in electronics instrumentation and is proficient in DCS systems like Yokogawa Centum VP.
Usman khan Resume
Muhammad Usman Khan is an electrical engineer with over 7 years of experience in radio network optimization and radio frequency engineering. He has worked on 2G and 3G networks for Mobilink and Ericsson in Pakistan, monitoring KPIs, conducting drive tests, troubleshooting issues, and handling customer complaints. He holds a BSc in Electrical Engineering and is PEC registered.
JOHN- Senior Electrical engineer
John Britto is a Senior Electrical Engineer with over 9 years of experience in electrical maintenance and testing. He is seeking a position that allows him to utilize his expertise in testing and maintaining electrical equipment to enhance reliability and performance. He has worked in various roles for companies in Dubai and Abu Dhabi, including as an Electrical Maintenance Engineer for Al Maktoum International Airport and a Senior Electrical Engineer for Enova Facilities Management at Abu Dhabi International Airport. He has strong technical skills in electrical projects, maintenance, planning, and computer programs.
What's hot (20)
Similar to DG cement exprnc
Ahmed Elsayed Salem CV
Ahmed Salem is an Egyptian electrical engineer seeking a project manager position. He has 15 years of experience managing electrical substation projects in Saudi Arabia and Egypt, including experience designing, testing, and commissioning high voltage equipment. His background includes designing transmission line schematics, configuring protection relays, and managing projects from conception to energization. He is proficient in English and Arabic and knowledgeable about computer design programs, project management software, and electrical engineering simulation tools.
CV
Abdul Gani has over 14 years of experience in testing, commissioning, and maintenance of signaling equipment, SCADA systems, and automation and control systems for railways. He has expertise in RTU configuration and testing, communication protocols, and power systems monitoring. His roles have included project engineering, system integration testing, and commissioning across various railway signaling and infrastructure projects in India.
telecom engineer cv-1
Mohamed Abdelwahab Elrashed Mohamed is a telecommunication engineer with over 10 years of experience in maintenance of computer systems, programs, and networks. He has extensive experience installing and maintaining mobile communication systems including Ericsson 6000 and traffic nodes. He is proficient in English and has skills in areas such as radio base station installation, transmission systems, CCTV security, computer maintenance, and wireless network design. His career includes positions as a network consulting engineer, telecommunication engineer, and various training and cooperative roles involving telecom installation and support.
deo@dipankar.doc
This document contains a summary of Dipankar Deo's professional experience and qualifications. He has over 7 years of experience in electrical maintenance, automation, instrumentation and project management, particularly in the steel industry. He is currently seeking a position utilizing these skills, preferably again in the steel industry. His previous role was as a Senior Engineer at Bhushan Power & Steel Ltd, where he oversaw electrical projects, maintenance and instrumentation in a Cold Rolling Mill.
14.09.06 - Enayat updated cv
This document is an application by Enayatullah Wahab for a project assistant or SCADA engineer position. It outlines his professional experience over 6 years working on automation and SCADA projects in India and the UAE. It also lists his core competencies including project coordination, electrical engineering, administration, and computer skills. Examples of relevant projects are provided along with responsibilities and technologies used such as RTUs, PLCs, SCADA systems, and various protocols.
MAZHAR NEW CV with Huawei,ZTE,LCC KSA 3G
Mazhar Ali is seeking a job in a dynamic organization where he can utilize his skills in electronics engineering and over 15 years of experience in telecommunications. He has worked for several telecom companies in Pakistan and Saudi Arabia, holding roles such as telecom engineer and site implementation engineer. His experience includes installation, commissioning, and maintenance of equipment from vendors such as Huawei, ZTE, Ericsson, and Alcatel. He is proficient in technologies like microwave transmission, GSM, 3G, and fiber optics.
VIJAY_RESUME
Vijay Vala is seeking new assignments in instrumentation, automation, electrical engineering or project roles. He has 5 years of experience in commissioning, maintenance, and programming of PLCs, DCS, SCADA and control systems. Currently he works as an Assistant Manager of Electrical and Automation at Jindal Steel & Power Ltd in Angul, India. He has expertise in programming languages like Ladder Logic, Function Block Diagram and Structured Text.
dipesh_resume
This document contains the resume of Dipesh Patel. It summarizes his contact information, educational qualifications, work experience, skills and personal details. He has over 5 years of experience in the telecom field as a BTS Commissioning Engineer. He has worked with various telecom companies on projects like Aircel, Idea, Reliance 4G. His expertise includes installation and maintenance of transmission equipment, BTS, electrical works, site acceptance testing and more. He is looking for a challenging position to contribute his technical skills as a telecom professional.
electrical cv - BE
- Mirza Gulrez Ahmad Baig has over 14 years of experience in process engineering, electrical systems, instrumentation, and automation projects in various industries. He is currently the Manager of Electrical Systems at JBF RAK LLC in the UAE, overseeing a greenfield polyester plant project.
- He has a diploma in instrumentation engineering and a bachelor's degree in electrical engineering. His technical skills include expertise in electrical distribution systems, motors, transformers, automation systems, and industrial utilities like cooling towers, compressors, and water treatment plants.
- He has managed electrical and utilities projects from design to commissioning at various companies in industries like chemicals, textiles, and polymers.
AKHILESH Resume
The document contains a resume for Akhilesh Kumar Singh, who has over 2.8 years of experience working as a RAN Engineer for telecom companies like ZTE and Nokia Siemens Networks. Singh's experience includes installation, configuration, and commissioning of network equipment as well as maintenance, troubleshooting, and optimization of 2G and 3G mobile networks. He is seeking new challenging assignments that make use of his skills and experience in technical operations, project management, and network management for the telecommunications industry.
SATHISH KUMAR - E&I
The document is a curriculum vitae for Sathish Kumar that summarizes his educational and professional background. It includes details about his bachelor's degree in electronic and instrumentation engineering, relevant skills like familiarity with quality management systems, and work experience in roles like instrumentation commissioning engineer and QA/QC instrumentation engineer on projects in Singapore, Angola, and Qatar. His technical knowledge covers areas such as electrical works, instrumentation and communication systems, and computer literacy.
RICHARD LEMIN CV 2016
Richard Lemin is a senior engineer seeking a field-based role focused on commissioning. He has over 15 years of experience in controls engineering, commissioning, and maintenance across various industries. His background includes roles in railway signaling, oil and gas turbine controls, and currently as a team leader for a global engineering firm. He has extensive training and qualifications in electrical and controls systems.
Electrical engineer
Rajesh Kumar Pathak is an electrical engineer with over 30 years of experience in various roles including as a maintenance supervisor, engineer, superintendent, and chief electrician. He has expertise in electrical engineering, software engineering, and quality engineering. His career has involved working on oil rigs, ships, and other projects in locations such as India, Nigeria, China, Malaysia, Saudi Arabia, and the UAE.
Engr.kamran shahid cv
Electrical Engineer in Facility Management of Hammad International Airport for the Operation & Maintenance of Electrical & Mechanical Equipment’s at 66kV GIS substations & Central Utility Plants for providing utilities mainly to the Passengers Terminal & other Facilities of Hamad International Airport
Khlau Rev0 150701
The document is a 3 page curriculum vitae for Lau Kung Hui, a 34 year old Malaysian male. It outlines his personal details, career aspiration in control systems, and extensive work experience over 13 years as a system integrator and engineer specializing in Allen Bradley PLC systems. It details 18 achievements and 20 troubleshooting jobs for various oil and gas facilities in Malaysia.
Mukesh_Kumar_(1)
Mukesh Kumar is an automation engineer with 8 years of experience in project management, design engineering, automation, and maintenance for the steel industry. He is currently working as an electrical engineer at Maaden Aluminium Company in Saudi Arabia. Previously he has worked on projects for hot rolling mills, reheating furnaces, and hot strip mills at various steel companies in India. He has extensive experience in PLC programming, drive commissioning, instrumentation, and automation systems integration. He is seeking a position in project management, automation, or maintenance & operations.
Modassar Resume
This document contains a resume for Md Modassar summarizing his professional experience and qualifications. He has over 6 years of experience in telecommunications working on projects for companies like NR Switch N Radio Services Pvt Ltd and ZTE Telecom India Pvt Ltd. His responsibilities have included maintenance and operations of BTS cell sites, transmission equipment, and E1 networks. He is seeking a challenging role in communications that allows him to contribute as a responsible team member.
Islam's CV.pdf
Islam Reda Mustafa Azkoul is an electrical maintenance and installation manager with over 12 years of experience in Egypt. He has a B.Sc. in electrical power and machines from Mansoura University. Currently he is the maintenance manager at AL-Teria Factory in Giza, Egypt, where he oversees electrical, mechanical, and utilities maintenance and leads projects. Previously he held electrical engineering roles at several paper mills and tissue factories in Egypt. He has skills in PLC programming, HMI programming, drives installation, and automation systems.
Esrar Alam Transmission Engineer
This document is a curriculum vitae for MD Esrar Alam, a telecom engineer with over 10 years of experience working in Saudi Arabia. He has extensive experience in engineering, project management, and maintenance roles for wireless and transmission networks. His specializations include GSM, LTE, transmission, and fiber optic network implementation, integration, and maintenance.
Naveed CV (1) (1)
Muhammad Naveed Afzal is a Pakistani telecommunications engineer seeking a job in telecommunications. He has over 7 years of experience in fields like GPON/FTTH installation and maintenance, mobile network planning and implementation, and microwave network troubleshooting. His experience includes roles at Etisalat UAE, ZTE Pakistan, Celeros Networks, Huawei Technologies, and various other telecom companies in Pakistan and the UAE. He has technical skills in areas such as GPON, FTTH, mobile network planning, microwave networks, and optical fiber installation and splicing.
Similar to DG cement exprnc (20)
DG cement exprnc
- 1. D. G. Knun Cement Co*pury Li*it.o I tfl. unit of tftfiat group No. DGKCCtADMNt6f6{ Dated: 10-U-2AM TO WHOM IT MAY CONCERN It is certified that Mr. Kamran Yousaf (Emp. # 7054) has worked with us as Electrical Engineer in Electronics Department at D.G. Khan Cement Company Limited w.e.f 15 November 2011 to 14 November 2013. He is a zealous and enthusiastic Engineer who is always keen to refine his craftsmanship, expertise & proficiency. He possesses extensive professional knowledge commensurate with his experience and age. During his job with us his responsibilities were: o Worked with PLC and Distributed Control System (DCS) . Worked Control System programming and data acquisition which inclUdes: Siemens, Modicon Quantum, Allen Bradley PLC's programming with FBD and Ladder in Unity and Concept. . Data Acquisition (From sensor/actuator to SCADA operator) via Field bus standards including Modbus, Modbus +, Profibus, TCP, WLAN Communication Protocols. . Worked in Fiber optic installation projects . gCS (Expert Control System) Operator station designing and programming. . Gas analyzer calibration & troubleshooting (ABB) o Worked as team member in the project of wiring of power and communications cables from data logging room to central control room. . Worked as active team member in shutdown activities of Kiln-l during March-April 2013 & Kiln-ll during September-Oct 2013. During shutdown inspection and maintenance of cooler area temperature sensors (thermocouple, PT-100), pressure switches, speed monitors, level sensors, substation HT/LV (6.3kV/400V) panels, motors, transformers, switchgear, circuit breakers CT, PT, MCC, frequency drives. Also installation & commissioning of new 500 l(// drive for E.P Fan. . CCTV trouble shooting & data handling. r Work experience on Siemens and ABB frequency drives. . Participated in PLC, Frequency drives, Site super vision & Trainings . Participated in time to time upgradation projects We have no re_servations in recommending him to any employer who is looking fonlrrard to the services of a versatile Electrical erengineer. We wish hirqggod luck irt-his future endeavors. (MAJOR (R PERVATZ) MANAGER ( sEcuRrrY) - rli---. l'"' ahl*, #it: u.r;ran.1 * !lii Factory: Khofli Sattai, D.G. Khan. Ph: 064-l I l-11-33-33, Fax: 064-2585010 -",.-ii -.,,'' Head Office: Nishat House, 53-A, Lawrence Road, Lahore. Ph: 042-l l1-l l-33-33 Fax:042-6367414