The document provides instructions for setting up and using the Datavideo TLM-170H monitor. It includes:
- A list of connections and inputs on the front and rear panels, including SDI, HDMI, composite and more.
- Details of the on-screen menu system for adjusting settings like brightness, contrast and picture-in-picture features.
- Specifications of supported video formats from sources like HDMI, SDI, component and composite connections.
- Instructions for powering on the monitor and navigating the menu options to customize settings.
Fluke 101 Basic Digital Multimeter User ManualTim Miller
This is the user manual of Fluke 101 Basic Digital Multimeter.
>> READ MORE: https://www.obdadvisor.com/best-automotive-multimeter/
Here is a detailed review of the multimeter based on my own experience, including:
- Compatibility
- Features and Functions
- Pros and Cons
Check it out to get the REVIEW and some NOTES about using the tool.
허니웰 3800i 산업용 바코드스캐너는 초당 270 회, 82 인치 (208 cm) 범위의 바코드를 읽을 수 있습니다.
스캐너 케이스와 밀봉된 광학 모듈에는 충격 흡수를 위한 고무 오버몰드 (overmold)가 장착되어 2 미터 콘크리트 낙하시에도 견딜 수 있습니다.
3800i 스캐너는 IP54 등급으로 먼지와 물이 스캐너에 유입되어 성능이 저하되는 것을 방지합니다.
혹독한 외부환경, 겨울철 -30 ° C (-22 ° F)의 조건의 온도에서도 작업할 수 있도록 설계되었습니다.
Superior Read Range
Imaging technology now extends the performance range out to 82 inches (208 cm) on linear codes. Long range reading performance eliminates the need to reach and climb to scan codes.
Durable
There are no moving parts to wear out and Honeywell backs this with an industry-leading 3 year warranty. Reliable performance year after year with no downtime.
Easy to Use
True point and shoot handheld ergonomics easily fi ts oversized gloved hands. Intuitive aiming means operators will become productive quickly.
Rugged Packaging
An impact absorbing, shock resistant housing withstands fi fty 6.5 foot (2 meter) drops, and is sealed to prevent dust, moisture, and other contaminants from entering the scanner. Designed to survive the most demanding industrial applications.
Fast and Aggressive Decode
Even on poorly printed or damaged codes, the 270 scans per second digital image logic is over 6 times faster than other technologies. Spend less time trying to re-scan poor codes and speed up the work process.
PERFORMANCE
Illumination : 630 nM Visible Red LED
Receiving Device : 3648 element linear imager
Reading Width : 15 mil. code, 15 in. (38.1 cm) from nose, 10 in. (25.4 cm) wide
Resolution : 7.5 mil. at 9 in. (22.9 cm) distance
Skew Angle : +65o
Pitch Angle : +65o
Horizontal Velocity : 2 in. (5.1 cm) per second
Minimum Symbol Contrast : 20%
Scan Rate : Up to 270 scans per second
Decode Rate : 270 decodes per second
MECHANICAL/ ELECTRICAL
Dimensions (without aimer) :
Length : 5.3 in. (13.5 cm)
Height : 6.4 in. (16.3 cm)
Width : 3.2 in. (8.1 cm)
Weight : 7.5 oz. (213 g)
Dimensions (with aimer*) :
Length : 5.3 in. (13.5 cm)
Height : 6.5 in. (16.5 cm)
Width : 3.2 in. (8.1 cm)
Weight : 8.4 oz. (238 g)
Housing : UL 94V0 grade
Power Requirements : 4.5 - 14Vdc at scanner
Current Draw (maximum) :
Input : 5V, 12V
Scanning : 235mA, 142mA
Idle : 68mA, 49mA
POWER SUPPLY
Noise Rejection : Maximum 100mV peak to peak, 10 to 100 kHz
ENVIRONMENTAL
Operating Temperature : -22oF to +122oF (-30oC to +50oC)
Storage Temperature : -40oF to +140oF (-40oC to +60oC)
Humidity : 0 to 95%, non-condensing
Sealing : IP54 (water and dust resistant)
Mechanical Shock : Operational after 50 drops from 6.5 ft. (2 m) to concrete
Ambient Illumination : 0 - 70,000 lux
ESD Protection : Functional after 15kV discharge
LED Classifi cation : Class 1 under EN60825-01
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Fluke 101 Basic Digital Multimeter User ManualTim Miller
This is the user manual of Fluke 101 Basic Digital Multimeter.
>> READ MORE: https://www.obdadvisor.com/best-automotive-multimeter/
Here is a detailed review of the multimeter based on my own experience, including:
- Compatibility
- Features and Functions
- Pros and Cons
Check it out to get the REVIEW and some NOTES about using the tool.
허니웰 3800i 산업용 바코드스캐너는 초당 270 회, 82 인치 (208 cm) 범위의 바코드를 읽을 수 있습니다.
스캐너 케이스와 밀봉된 광학 모듈에는 충격 흡수를 위한 고무 오버몰드 (overmold)가 장착되어 2 미터 콘크리트 낙하시에도 견딜 수 있습니다.
3800i 스캐너는 IP54 등급으로 먼지와 물이 스캐너에 유입되어 성능이 저하되는 것을 방지합니다.
혹독한 외부환경, 겨울철 -30 ° C (-22 ° F)의 조건의 온도에서도 작업할 수 있도록 설계되었습니다.
Superior Read Range
Imaging technology now extends the performance range out to 82 inches (208 cm) on linear codes. Long range reading performance eliminates the need to reach and climb to scan codes.
Durable
There are no moving parts to wear out and Honeywell backs this with an industry-leading 3 year warranty. Reliable performance year after year with no downtime.
Easy to Use
True point and shoot handheld ergonomics easily fi ts oversized gloved hands. Intuitive aiming means operators will become productive quickly.
Rugged Packaging
An impact absorbing, shock resistant housing withstands fi fty 6.5 foot (2 meter) drops, and is sealed to prevent dust, moisture, and other contaminants from entering the scanner. Designed to survive the most demanding industrial applications.
Fast and Aggressive Decode
Even on poorly printed or damaged codes, the 270 scans per second digital image logic is over 6 times faster than other technologies. Spend less time trying to re-scan poor codes and speed up the work process.
PERFORMANCE
Illumination : 630 nM Visible Red LED
Receiving Device : 3648 element linear imager
Reading Width : 15 mil. code, 15 in. (38.1 cm) from nose, 10 in. (25.4 cm) wide
Resolution : 7.5 mil. at 9 in. (22.9 cm) distance
Skew Angle : +65o
Pitch Angle : +65o
Horizontal Velocity : 2 in. (5.1 cm) per second
Minimum Symbol Contrast : 20%
Scan Rate : Up to 270 scans per second
Decode Rate : 270 decodes per second
MECHANICAL/ ELECTRICAL
Dimensions (without aimer) :
Length : 5.3 in. (13.5 cm)
Height : 6.4 in. (16.3 cm)
Width : 3.2 in. (8.1 cm)
Weight : 7.5 oz. (213 g)
Dimensions (with aimer*) :
Length : 5.3 in. (13.5 cm)
Height : 6.5 in. (16.5 cm)
Width : 3.2 in. (8.1 cm)
Weight : 8.4 oz. (238 g)
Housing : UL 94V0 grade
Power Requirements : 4.5 - 14Vdc at scanner
Current Draw (maximum) :
Input : 5V, 12V
Scanning : 235mA, 142mA
Idle : 68mA, 49mA
POWER SUPPLY
Noise Rejection : Maximum 100mV peak to peak, 10 to 100 kHz
ENVIRONMENTAL
Operating Temperature : -22oF to +122oF (-30oC to +50oC)
Storage Temperature : -40oF to +140oF (-40oC to +60oC)
Humidity : 0 to 95%, non-condensing
Sealing : IP54 (water and dust resistant)
Mechanical Shock : Operational after 50 drops from 6.5 ft. (2 m) to concrete
Ambient Illumination : 0 - 70,000 lux
ESD Protection : Functional after 15kV discharge
LED Classifi cation : Class 1 under EN60825-01
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
ICARvisions is a solutions based, global leader specializing in vehicle related hardware and software design, manufacture and deployment of Mobile Digital Video Recorders (MDVR), Mobile Network Video Recorders (MNVR) and Sensors, Cameras, Cables, and Accessories. Contact:lilac@icarvisions.com
Hướng dẫn sử dụng đồng hồ đo hạt nano Testo DiSCminiTenmars Việt Nam
Hướng dẫn sử dụng đồng hồ đo hạt nano Testo DiSCmini
https://testostore.vn/san-pham/may-dem-hat-nano-testo-discmini/
https://testostore.vn/danh-muc/may-do-phat-xa/dong-ho-do-hat-nano/
데이타맥스프린터 Datamax E-Class Mark III 열전사감열 바코드프린터 매뉴얼HION IT
데이타맥스 E-Class Mark III는 다양한 산업 분야에 맞게 설계된 비용대비 효율성이 높은 소형 데스크탑 열전사 바코드프린터로, 사용하기 쉽고 안정적이고 경제적인 바코드프린터입니다.
E-Class Basic
Basic 모델은 가장 보편적인 모델로서 바코드 어플리케이션에 많이 사용되는 모델, USB 및 시리얼 포트가 기본으로 장착되어 있으며 옵션으로 300 DPI 해상도 지원 및 열전사 옵션, 라벨분리 기능이 있습니다.
E-4204B (203 DPI)
E-4304B (300 DPI)
E-Class Advanced
Advanced 모델은 네트워크 기능과, 빠른 인쇄속도를 요구하는 소비자와 특수라벨 출력시 필요합니다.
또한 Basic 모델에 장착되어 있는 통신포트는 기본 사양이며 병렬 포트와 이더넷 포트가 포함되어 있습니다.
인쇄속도는 초당 5인치까지 가능합니다.
E-4205A (203 DPI)
E-4305A (300 DPI)
E-Class Professional
Professional 모델은 보다 정교한 어플리케이션에 적용이 가능합니다.
그래픽 디스플레이가 기본으로 장착되어 있으며 Read Time Clock 및 알람 기능도 내장되어 있습니다.
옵션으로 무선랜 및 블루투스 기능이 제공합니다.
E-4206P (203 DPI)
E-4305P (300 DPI)
E-Class Professional Plus
Professional Plus 모델은 내장형으로 더욱 큰 지관의 라벨을 필요로 하는 소비자에게 필요합니다.
Professional 모델의 모든 옵션들이 기본으로 장착되어 있으며, 확장된 내장형 라벨 장착 공간과 내장형 접이식 라벨 공급 공간이 제공됩니다.
E-4206L (203 DPI)
E-4305L (300 DPI)
손쉬운 로딩
새롭게 고안된 장치로이해 라벨 및 리본 장착이 쉬워젔습니다.
강력한 제품, 재질
고강도 이중구조로 만들어져서 내구성이 뛰어납니다.
라벨 확인 창
작업자가 라벨프린터 작업 중 직접 라벨의 잔량 확인이 가능합니다.
액체로부터 보호
굳게 닫혀져 있는 E-Class 설계 덕분에 액체로부터 보호가 가능합니다.
리본 비용절감
1인치 지관의 리본 사용이 가능함으로 리본 비용 절감이 가능합니다.
더욱 큰 라벨 장착 가능
Professional Plus 모델에서는 보다 많은 라벨을 수용할 수 있습니다.
내장형 Fan Fold 기능
라벨을 먼지나 다른 이물질로부터 보호 합니다.
손쉬운 유지보수
프린터헤드 및 드라이브 롤러를 아주 쉽게 교체할 수 있습니다.
큰 화면 제공
현재 프린터기의 상태를 표시해 줍니다 (Professional 이상 가능)
적용분야
제조 산업:
자산관리
완제품 관리
에이전시 라벨출력
케이스 라벨
리테일:
아이템 라벨
선반 라벨
세일물품 라벨
반품물품 라벨
우체국 서비스:
선적라벨
택배이력 관리
배달이력 관리
BASIC MODEL : E-4204B (203dpi), E-4304B (300dpi)
The Basic model meets the needs of the most popular barcoding applications. USB and serial ports are included as standard features. Optional 300dpi, thermal transfer and label peeler are also available.
Printer type :
Direct thermal, Optional thermal transfer
Print length range : 0.375” - 99” (9.5mm - 2514mm)
Resolution : 203 dpi (8 dots/mm), Optional 300 dpi (12 dots/mm)
Communication Options : USB 2.0, Serial RS232
Dimensions : 8.01”w x 7.36”h x 11.10”d (203.5mm x187mm x 282mm)
Weight : 84 oz. (2.4 kg)
Speed : 4ips (101mm/s)
Maximum Print Width : 4.25” (108 mm) @ 203dpi (8 dots/mm); 4.16”(106 mm) @ 300dpi (12 dots/mm)
Maximum Internal Media Roll Capacity : 5.0” (127 mm) O.D.
Memory : 64MB Flash / 16MB DRAM
Power Source Options/Accessories :
Fitted Lower Enclosure for Power Converter (optional)
Fitted Lower Enclosure for Power Converter & Battery Pack (accessory)
Indicators/Display : Two Light Indicators with 3 Colors
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Datavideo PD-3 Power Distribution CenterAV ProfShop
The Datavideo PD-3 is a 19" rack mountable universal AC to DC power distribution center, designed to supplies a steady user chosen voltage for production kit whilst on location or in your studio.
ICARvisions is a solutions based, global leader specializing in vehicle related hardware and software design, manufacture and deployment of Mobile Digital Video Recorders (MDVR), Mobile Network Video Recorders (MNVR) and Sensors, Cameras, Cables, and Accessories. Contact:lilac@icarvisions.com
Hướng dẫn sử dụng đồng hồ đo hạt nano Testo DiSCminiTenmars Việt Nam
Hướng dẫn sử dụng đồng hồ đo hạt nano Testo DiSCmini
https://testostore.vn/san-pham/may-dem-hat-nano-testo-discmini/
https://testostore.vn/danh-muc/may-do-phat-xa/dong-ho-do-hat-nano/
데이타맥스프린터 Datamax E-Class Mark III 열전사감열 바코드프린터 매뉴얼HION IT
데이타맥스 E-Class Mark III는 다양한 산업 분야에 맞게 설계된 비용대비 효율성이 높은 소형 데스크탑 열전사 바코드프린터로, 사용하기 쉽고 안정적이고 경제적인 바코드프린터입니다.
E-Class Basic
Basic 모델은 가장 보편적인 모델로서 바코드 어플리케이션에 많이 사용되는 모델, USB 및 시리얼 포트가 기본으로 장착되어 있으며 옵션으로 300 DPI 해상도 지원 및 열전사 옵션, 라벨분리 기능이 있습니다.
E-4204B (203 DPI)
E-4304B (300 DPI)
E-Class Advanced
Advanced 모델은 네트워크 기능과, 빠른 인쇄속도를 요구하는 소비자와 특수라벨 출력시 필요합니다.
또한 Basic 모델에 장착되어 있는 통신포트는 기본 사양이며 병렬 포트와 이더넷 포트가 포함되어 있습니다.
인쇄속도는 초당 5인치까지 가능합니다.
E-4205A (203 DPI)
E-4305A (300 DPI)
E-Class Professional
Professional 모델은 보다 정교한 어플리케이션에 적용이 가능합니다.
그래픽 디스플레이가 기본으로 장착되어 있으며 Read Time Clock 및 알람 기능도 내장되어 있습니다.
옵션으로 무선랜 및 블루투스 기능이 제공합니다.
E-4206P (203 DPI)
E-4305P (300 DPI)
E-Class Professional Plus
Professional Plus 모델은 내장형으로 더욱 큰 지관의 라벨을 필요로 하는 소비자에게 필요합니다.
Professional 모델의 모든 옵션들이 기본으로 장착되어 있으며, 확장된 내장형 라벨 장착 공간과 내장형 접이식 라벨 공급 공간이 제공됩니다.
E-4206L (203 DPI)
E-4305L (300 DPI)
손쉬운 로딩
새롭게 고안된 장치로이해 라벨 및 리본 장착이 쉬워젔습니다.
강력한 제품, 재질
고강도 이중구조로 만들어져서 내구성이 뛰어납니다.
라벨 확인 창
작업자가 라벨프린터 작업 중 직접 라벨의 잔량 확인이 가능합니다.
액체로부터 보호
굳게 닫혀져 있는 E-Class 설계 덕분에 액체로부터 보호가 가능합니다.
리본 비용절감
1인치 지관의 리본 사용이 가능함으로 리본 비용 절감이 가능합니다.
더욱 큰 라벨 장착 가능
Professional Plus 모델에서는 보다 많은 라벨을 수용할 수 있습니다.
내장형 Fan Fold 기능
라벨을 먼지나 다른 이물질로부터 보호 합니다.
손쉬운 유지보수
프린터헤드 및 드라이브 롤러를 아주 쉽게 교체할 수 있습니다.
큰 화면 제공
현재 프린터기의 상태를 표시해 줍니다 (Professional 이상 가능)
적용분야
제조 산업:
자산관리
완제품 관리
에이전시 라벨출력
케이스 라벨
리테일:
아이템 라벨
선반 라벨
세일물품 라벨
반품물품 라벨
우체국 서비스:
선적라벨
택배이력 관리
배달이력 관리
BASIC MODEL : E-4204B (203dpi), E-4304B (300dpi)
The Basic model meets the needs of the most popular barcoding applications. USB and serial ports are included as standard features. Optional 300dpi, thermal transfer and label peeler are also available.
Printer type :
Direct thermal, Optional thermal transfer
Print length range : 0.375” - 99” (9.5mm - 2514mm)
Resolution : 203 dpi (8 dots/mm), Optional 300 dpi (12 dots/mm)
Communication Options : USB 2.0, Serial RS232
Dimensions : 8.01”w x 7.36”h x 11.10”d (203.5mm x187mm x 282mm)
Weight : 84 oz. (2.4 kg)
Speed : 4ips (101mm/s)
Maximum Print Width : 4.25” (108 mm) @ 203dpi (8 dots/mm); 4.16”(106 mm) @ 300dpi (12 dots/mm)
Maximum Internal Media Roll Capacity : 5.0” (127 mm) O.D.
Memory : 64MB Flash / 16MB DRAM
Power Source Options/Accessories :
Fitted Lower Enclosure for Power Converter (optional)
Fitted Lower Enclosure for Power Converter & Battery Pack (accessory)
Indicators/Display : Two Light Indicators with 3 Colors
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Datavideo PD-3 Power Distribution CenterAV ProfShop
The Datavideo PD-3 is a 19" rack mountable universal AC to DC power distribution center, designed to supplies a steady user chosen voltage for production kit whilst on location or in your studio.
The HERO3: White Edition boasts the same high performance specs as the Original HD HERO camera it replaces, yet it has built-in Wi-Fi, new UI and is 30% smaller and 25% lighter.
Whether you're shooting news, commercials, sports, documentaries or special events, JVC's new GY-HM850E is your first choice in an affordable high-performance shoulder camera.
Chuyên cung cấp giải pháp VOIP
TIME TRUE LIFE TECHNOLOGY JOINT STOCK COMPANY
Mr Long
Mobi: 0986883886 - 0905710588
Email: long.npb@ttlcorp.vn
Website: ttlcorp.vn
Android 4.2 Car Stereo Instructions Use ManualAuto pumkin
This Android 4.2 Car Stereo Use Manual can help you know how to set the android 4.2 car stereo audio wifi, bluetooth, GPS, lanague, steering wheel, factory, button, date and time, safety, backup and reset. All android 4.2 car head units from autopumpkin.com are suitable. The detail instructions of Pumpkin android 4.2 car stereo wiring diagram.
Datavideo SE-2200 6 input HD broadcast quality switcher
Datavideo TLM-170H 17" Widescreen LCD Monitor - Desktop Version
1.
2. Contents
Warranty....................................................................................................................4
Standard Warranty ..............................................................................................................................4
Two Year Warranty..............................................................................................................................4
Disposal...............................................................................................................................................4
TLM-170H Model Types ...........................................................................................5
Packing List .........................................................................................................................................5
Product Overview.....................................................................................................6
Features ..............................................................................................................................................6
Supported Formats..............................................................................................................................7
From a Video Source...........................................................................................................................8
Connections & Controls ..........................................................................................9
Front Panel ..........................................................................................................................................9
Rear Panel.........................................................................................................................................10
Powering On......................................................................................................................................11
Menu Options .........................................................................................................11
Video Processor ................................................................................................................................11
PIP Feature Setting ...........................................................................................................................11
Audio Function Setting ......................................................................................................................12
Special Function I..............................................................................................................................12
Special Function II.............................................................................................................................13
System Information & Factory Reset Option .....................................................................................13
TLM-170H: Fitting the Desktop stand to the TLM-170H ...................................................................15
TLM-170HR: Fitting the 19” Rack Ears to the TLM-170H .................................................................16
TLM-170HM: Fitting the monitor to a 19” Rack .................................................................................17
Specifications.........................................................................................................18
Disclaimer of Product and Services
The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to
give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this
manual, from time to time, may not be correct or may be incomplete. This manual may contain typing errors, omissions or
incorrect information. Datavideo Technologies always recommend that you double check the information in this document for
accuracy before making any purchase decision or using the product. Datavideo Technologies is not responsible for any
omissions or errors, or for any subsequent loss or damage caused by using the information contained within this manual.
Further advice on the content of this manual or on the product can be obtained by contacting your local Datavideo Office or
dealer.
2
3. Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.
3
Use a slightly damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable surface, cart, stand, or table. The unit may fall, causing
serious damage.
6. Any slots and openings on the case top, back, and bottom are provided for ventilation. To
ensure safe and reliable operation of this unit, and to protect it from overheating, do not block
or cover these openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the
ventilation openings may become blocked. This unit should never be placed near or over a
heat source or radiator. This unit should not be placed in a built-in installation unless proper
ventilation is provided.
7. This product should only be operated from the type of power source indicated on the marking
label of the AC adapter. If you are not sure of the type of power available, consult your
Datavideo dealer or your local power company.
8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord
will be walked on, rolled over, damaged or otherwise stressed.
9. If an extension cord must be used with this unit, make sure that the total of the ampere ratings
on the products plugged into the extension cord do not exceed the extension cord’s rating.
10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do
not exceed 15 amperes.
11. Never push objects of any kind into this unit through the case ventilation slots, as they may
touch dangerous voltage points or short out parts that could result in risk of fire or electric
shock. Never spill liquid of any kind onto or into this unit.
12. Except as specifically explained elsewhere in this manual, do not attempt to service this
product yourself. Opening or removing covers that are marked “Do Not Remove” may expose
you to dangerous voltage points or other risks, and will void your warranty. Refer all service
issues to qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified service personnel under the
following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions.
Adjust only those controls that are covered by the operating instructions in this
manual; improper adjustment of other controls may result in damage to the unit and
may often require extensive work by a qualified technician to restore the unit to
normal operation;
e. When the product has been dropped or the case has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for
service.
14. Due to the general consumer usage behavior, efficient power distribution on the field,
corporate environment responsibility by eliminating harmful substances such as carbon
dioxide, sulphur dioxide, etc, and other unexpected risks, this product does not provide
standby power option.
4. 4
Warranty
Standard Warranty
• Datavideo equipment is guaranteed against any manufacturing defects for one year from the
date of purchase.
• The original purchase invoice or other documentary evidence should be supplied at the time
of any request for repair under warranty.
• Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered
by this warranty.
• All mail or transportation costs including insurance are at the expense of the owner.
• All other claims of any nature are not covered.
• Cables & batteries are not covered under warranty.
• Warranty only valid within the country or region of purchase.
• Your statutory rights are not affected.
Two Year Warranty
• All Datavideo products purchased after 01-Oct.-2008 qualify for a free one year extension to the
standard Warranty, providing the product is registered with Datavideo within 30 days of
purchase. For information on how to register please visit www.datavideo-tek.com or contact
your local Datavideo office or authorized Distributors
• Certain parts with limited lifetime expectancy such as LCD Panels, DVD Drives, and Hard
Drives are only covered for the first 10,000 hours, or 1 year (whichever comes first).
Any second year warranty claims must be made to your local Datavideo office or one of its authorized
Distributors before the extended warranty expires.
Disposal
For EU Customers only - WEEE Marking
This symbol on the product indicates that it should not be treated as household
waste. It must be handed over to the applicable take-back scheme for the
recycling of Waste Electrical and Electronic Equipment. For more detailed
information about the recycling of this product, please contact your local
Datavideo office.
5. Model TLM-170H TLM-170HR TLM-170HM
System Desktop 7U rack mount 1U mobile tray rack mount
5
TLM-170H Model Types
Image
Packing List
Model No
Item TLM-170H TLM-170HR TLM-170HM
Desktop Stand (LA-100-2) 1
7U Rack Mounts 2
Cable Tie 36cm
Cable Tie 12cm 5 5
Switch adaptor DC 12V / 1.5A 1 1 1
Screw M3*6mm 8 8
Screw M5*10mm 8 8
Screw M4*6mm 4
TLM-170H Series Instruction Manual 1 1 1
6. Product Overview
The Datavideo TLM-170H monitor is designed for superior performance. Whether your application is
in a live production gallery, 19’’ rack monitoring, 12V OB truck or a video editing suite the TLM-170H
will help you confidently monitor the pictures within your chosen workflow.
The Datavideo TLM-170H monitor has an on-screen menu which allows control and set up of
brightness, contrast, saturation, hue, sharpness, colour temperature and picture in picture. The
menus can also be used to display onscreen overlays for frame marker, 4:3 marker, 16:9 Marker,
Cinema Zone Marker, Center Point, embedded SDI Timecode and Monitor Title.
The TLM-170H Front Panel Buttons allow selection of source input as well as PIP, Aspect ratio, Blue
only, Pattern (Colour Bars), Menu and audio controls. Input HD/SD sources via the rear panel SDI,
HDMI, Component (Y, Pb, Pr), S-Video (Y/C) and Composite connections as well as monitoring RCA
phono or embedded SDI / HDMI audio.
Features
Front Panel
• 17.3” (1600x900) LCD TFT Display
• Source Selection buttons
• Aspect ratio switch, Picture in Picture, Blue Only and Pattern buttons
• Audio Level and Mute buttons
• 3.5mm Headphone Jack
• Bi-Colour Tally indicator (Off, Yellow, Red)
• Standby Power ON/OFF button
6
Rear Panel
• 12V DC Power adaptor input (2.1mm) with screw locking thread
• Main Power ON/OFF switch
• Adjustable viewing angle (model dependant)
Video Inputs
• HD-SDI /SD-SDI video BNC input with loop-through BNC output
• 2x Standard HDMI inputs (Ver. 1.1)
• 1x Component Y Pb Pr on BNC
• 1x S-Video (Y/C) 4pin mini din connector
• 2x Composite BNC inputs
• PAL & NTSC auto switching
Audio Inputs
• 4 x RCA sockets for analogue audio from Component, Y/C and Composite sources
• Supports SD/HD-SDI embedded audio
• Supports HDMI embedded audio (Ver.1.1)
• Speaker cable output connections (L-, L+, R-, R+) Max 5v p - p (2w)
Menu Features
• Monitor Underscan and Overscan mode selection
• Adjustment of Brightness, Contrast, Saturation, Hue and Sharpness
• Adjustable Colour Temperature setting (6500K, 7500K, 9300K and user defined)
• Adjustable PIP source and placement settings
• Internal and external speaker mute control
• On-Screen Audio Level indicator
• Selectable On-Screen overlay for center mark, 4:3, 16:9, Cinema Zone and Frame markers
• On-Screen Time Code available when monitoring SD-SDI or HD-SDI signals
• On-Screen Editable Monitor Title on Safe area
• LCD Backlight adjustment
• Factory reset option
7. Supported Formats
From a Graphics Card
The TLM-170H panel will support/display the following 60Hz computer resolutions when supplied via
a standard DVI to HDMI cable.
Please note the TLM-170H panel is natively 1600 x 900 pixels so certain resolutions may be slightly
edge cropped and bars/columns may be shown with other resolutions when the panel is switched
between 16:9 and 4:3 using the aspect button.
Resolution Aspect
SVGA 800 x 600 4:3
XGA 1024 x 768 4:3
1152 x 864 4:3
WXGA 1280 x 768 16:9
WXGA 1280 x 800 16:10
1280 x 960 4:3
SXGA 1280 x 1024 5:4
1360 x 768 16:9
WSXGA+ 1680 x 1050 16:10
7
8. 8
From a Video Source
TLM-170H Interface
Format
HDMI SDI YUV CV & S-Video
1920x1080P@59.94 Support NA NA NA
1920x1080P@60 Support NA NA NA
1920x1080P@50 Support NA NA NA
1920x1080P@29.97 Support Support Support NA
1920x1080P@25 Support Support Support NA
1920x1080P@30 Support Support Support NA
1920x1080P@23.98 Support Support Support NA
1920x1080P@24 Support Support Support NA
1920x1080P@23.98SF NA NA NA NA
1920x1080P@24SF NA NA NA NA
1920x1080i@59.94 Support Support Support NA
1920x1080i@60 Support Support Support NA
1920x1080i@50 Support Support Support NA
1280x720P@59.94 Support Support Support NA
1280x720P@60 Support Support Support NA
1280x720P@50 Support Support Support NA
1280x720P@23.98P NA NA NA NA
1280x720P@24P NA NA NA NA
720 x 480i (NTSC) Support Support Support Support
720 x 576i (PAL) Support Support Support Support
9. 9
Connections & Controls
Front Panel
Bi-Colour Tally Light Can be used to indicate Live (RED) or Cued (AMBER) source.
Source Select Buttons Select the type of input you are using
SDI, HDMI, YUV, S-Video, CV 1 & 2
The active input will be indicated by a red LED on the Source Button
Aspect Ratio Button Toggles the Aspect Ratio between 16:9 and 4:3
The selected aspect ratio will be confirmed in the top left corner of
the display
PIP Button Activates Picture in Picture Mode - See PIP Menu for more details.
Red LED will light when PIP mode is active.
Menu Navigation Buttons See Menu Options for more details
Mute Button Mutes the audio from the internal speakers or headphone socket.
Volume Control - /+ Adjusts the speaker / headphone volume up / down.
Standby Button Switches the TLM-170H screen On from standby / Off to standby
N.B. The main Power On/Off switch is located on the rear of the TLM-170H.
Headphone Socket 3.5mm headphone socket; internal speaker circuit will automatically
mute when headphones are connected.
10. 10
Rear Panel
VESA 100x100 Mounting Holes
For fitting a universal VESA style wall mounting bracket. Also used for
attaching the Datavideo desktop stand (LA-100-2) to the monitor.
Stand is not supplied with TLM-170HR or HM models.
3.5mm Tally Light Input Tally light information can be supplied to the monitor from the
Datavideo RMC-140, TB-5 or TB-10 via this 3.5mm jack socket.
Component Video Input BNC connectors for Component (YUV / Y Pb Pr)) Video.
S-Video Input Input for S-Video (Y/C).
Composite Video Inputs BNC connectors 1 and 2 for Composite Video.
Analogue Audio Inputs Mono Audio Inputs to correspond to the Analogue Video Inputs
(Component / S-Video / Composite 1 & 2)
Speaker Output Connections Speaker Output connections Max 5V p - p (2w)
DC In Socket 2.1mm In Line Power Socket with screw collar for connecting the
suitable 12V 1.5A (16W) feed.
On / Off Switch Main on / off switch, switches the TLM-170H on and off.
N.B.The front panel power button will switch the TLM-170H from Standby Mode to On.
HDMI Input Video and Audio input from HDMI.
SDI Input & Loop Through BNC Input for SD / HD-SDI with a Loop Through Output.
Maintenance Not used – service use only.
11. Powering On
Menu Options
The TLM-170H is set up via on screen menus. To display the on screen menu press the MENU
button. The menus are navigated using the UP / DOWN buttons.
There are six menus: Video Processor,
PIP Feature Setting,
Audio Function Setting,
Special Function I,
Special Function II
System Information
Video Processor
The first menu to be displayed is the Video Processor Menu.
To access the Video Processor Menu press enter, the Brightness setting will be highlighted.
To adjust the Brightness press Enter again. An adjustment bar will appear at the bottom of the screen.
Use the Up / Down buttons to change the setting and then press Enter to store the new value and to
return to the main menu.
To select a different setting (Contrast, Saturation, Hue, Sharpness, Colour Temp.) use the Up / Down
buttons. Follow the same procedure to set the other values.
PIP Feature Setting
The PIP Feature Setting Menu allows you to adjust the appearance of the picture in picture. The
position, size, main source and sub source can be set in the menus.
To access the menu press enter so that PIP Mode is highlighted
To access the options for the selected setting press enter again, so that the option column is
highlighted - In this case Large PIP.
Use the Up / Down buttons to navigate the available options.
You can choose:
PIP Mode Large PIP / Small PIP
PIP Position Bottom-Right / Top-Left / Top-Right / Bottom
11
Left
PIP Main Source CVBS 1 / CVBS 2 / SVIDEO / COMP. –
Component / HDMI 1 / HDMI 2 / SDI
PIP Sub Source CVBS 1 / CVBS 2 / SVIDEO / COMP. –
Component / HDMI 1 / HDMI 2 / SDI
N.B. The PIP feature can only be one analogue source and one digital source. i.e. If the main source is analogue
then the sub source must be digital, or vice versa.
Examples: Main Source = Analogue source = CVBS / SVIDEO / COMP
Sub Source = Digital source = HDMI / SDI
Main Source = Digital source = HDMI / SDI
Sub Source = Analogue source = CVBS / SVIDEO / COMP
12. Audio Function Setting
The Audio Functions Setting Menu allows you to adjust the Internal Speaker Mute Control, External
Speaker Mute Control and on screen Audio Indicator.
To access the options for the selected setting press enter again, so that the option column is
highlighted.
Use the Up / Down buttons to navigate the available options.
You can choose:
Internal Speaker Mute Control On / Off
External Speaker Mute Control On / Off
Audio Indicator On / Off
Special Function I
The Special Function I Menu has settings for the Frame Ratio, Safe Area, Scan Mode, Central Mark,
Cinema Zone Mark and Mask Type…etc.
To access the options for the selected setting press enter again, so that the option column is
highlighted.
Use the Up / Down buttons to navigate the available options.
You can choose:
Frame Ratio Off / 80% / 90%
4:3 Mark Line On / Off
Scan Mode Under scan / Over scan
Center Mark On / Off
Cinema Zone Mark On / Off
Mask Type Overlay / Transparent
N.B. Frame Ratio - This will display a “Safe Area” frame on the screen
12
13. Special Function II
The Special Function I Menu has settings for the SDI Time Code Setup and Title Editor.
To access the options for the selected setting press enter again, so that the option column is
highlighted.
Use the Up / Down buttons to navigate the available options.
You can
Time Code Setup Time Code Display On / Off
choose:
Time Code Position MID_BOT / LF_TOP / RT_TOP /
13
RT_BOT
HD Line Auto / 8~20
SD Line Auto / 10~21
Font Size Small / Large
Title Editor Title Display On / Off
Title Position MID_TOP / MID_BOT
Font Size Small / Large
Edit Title Pos: 1~15
Char: A~Z
NB: Switch the Title Display function On before attempting to use the Edit Title function.
System Information & Factory Reset Option
The System Information Menu displays the Firmware Version of the monitor, and offers a Factory
Reset option, which will return all the settings of the monitor to the factory defaults.
To access the options for the selected setting press enter again, so that the option column is
highlighted.
Use the Up / Down buttons to navigate the available options.
You can choose:
Back Light 1~16
Factory Reset Yes / No
To reset the monitor press the ENTER button, so that Factory Reset is highlighted, and then press
ENTER again to highlight the options column.
Use the UP / Down button to select YES from the options and then press ENTER to reset the monitor.
After a few seconds the monitor will be reset.
14. Using the 4:3 Mask in 16:9 mode
Sometimes when viewing 16:9 footage you may want to know what part of the video will be seen on
4:3 monitors for both picture composition and titles. The 4:3 Mask function of the TLM-170H allows
you to do this easily by pressing one button during normal 16:9 viewing.
This 4:3 mask can be set as transparent or overlay within the Special Function I menu. The
Transparent setting allows the 16:9 video to be seen through the mask. The Overlay setting does
not allow video to be seen outside of the central 4:3 area.
To toggle the mask overlay on or off press the UP button during normal 16:9 viewing.
Displaying the 80 / 90 % area frame overlay
Television standards do not currently define the official size for overscan or underscan areas of video
displayed on televisions and monitors. Different makes and models of monitors can show less or
more of the video area that was actually captured by the camera. To ensure any overlaid titles are not
cropped off the displayed video area of any monitor safe areas of 80% and 90% were devised by
production companies.
The Special Function I menu allows a choice of off, 80% or 90% for Frame Ratio. By pressing the
down button during normal viewing the 80% or 90% Frame overlay will be displayed or turned off.
14
15. TLM-170H: Fitting the Desktop stand to the TLM-170H
The TLM-170H is supplied with a desktop stand (LA-100-2). Please refer to the LA-100-2 User Guide
for adjustments to the stand, prior to fitting it to the monitor.
To attach the stand to the monitor, align the stand with the VESA 100 mounting holes on the rear of
the monitor, and use the four supplied screws to secure it.
15
16. TLM-170HR: Fitting the 19” Rack Ears to the TLM-170H
The TLM-170HR is supplied with 19” Rack Ears, these allow the monitor to be rack mounted (19” 7U).
Use the supplied screws to attach the left and right rack ears. You will there are four screws either
side, as illustrated above, plus additional screws at the base of each rack ear, as illustrated below.
16
17. TLM-170HM: Fitting the monitor to a 19” Rack
The TLM-170HM is designed to rack mount. When folded away it is 1U high, please bear in mind that
when opened for operation the monitor is 6U high, so leave adequate room above for this.
The monitor arrives already fitted with sliding rack rails, these have a length adjustment at the rear to
suit the distance between the front and rear rack rails of your cabinet.
To adjust the length loosen the four adjustment nuts as illustrated below, and pull the side rails back
as far as is required. Then re-tighten the nuts.
Mount the monitor in your rack with the rear panel facing upwards. Ensure the rack mounting screws
are secured both front and rear.
Once mounted and secure to the rack, unscrew the two locking screws on either side of the front
panel, and pull the monitor forward using the handle. Once the monitor is fully forward simply hinge it
up into a vertical position.
To fold away, pull the top of the monitor forward, so that it hinges down to a horizontal position, then
push it back into the rack until you are able to screw in the locking screws.
N.B. When folding the monitor away be careful not to trap your fingers or scrape your hand on the
rack cabinet.
17
18. Specifications
LCD Display 17.3” TFT LCD
Resolution RGB 1600 x 900 pixel
Aspect Ratio 4:3 and 16:9 selectable
LED Life time 12,000 hrs (approx.)
Brightness (Luminance) 220 cd/m²
Contrast Ratio 500:1
View Angle
Top: 20 deg Bottom: 45 deg
Left: 45 deg Right: 45 deg
To use 2U 19'' rack mount can support adjustable view angle
(Tilt 45 degree viewing angle)
Video Input 2 CV / S-Video / HD-YUV / HD & SD-SDI + HDMI (ver 1.1 x 2)
Video System NTSC / PAL auto recognition
Colour Adjustment Brightness, Contrast, Colour Saturation, Hue
Tally Indication 1
Operation condition Operation temperature from 0℃ to 50℃, RH less than 90%
Power Consumption DC 12V / 1.5A (16W)
HD/SD-SDI
Standard
SMPTE 259M-C (270Mbps - 525/625 Component Video)
& SMPTE 292M (1.485/1.001 Gbps)
18
Connector BNC (IEC 169-8)
Impedance 75 Ω
Return Loss HD
> 15 dB (5 MHz to 750 MHz)
> 10 dB (750 MHz to 1.5 GHz)
Return Loss SD > 15 dB (5 MHz to 270 MHz)
Equalization 200m Belden 8281 cable at 270 Mbps;
100m (typical) Belden 1694A at 1.485Gbps
CV
Bandwidth > 5.0MHz
Differential of Gain (DG) <3%
Differential of Phase (DP) <3°
S/N: > 50 dB
YUV
Bandwidth > 5.2MHz
Differential of Gain (DG) <3%
S/N: > 50 dB