Datasheet KBM HQ
•
0 likes•315 views
This document provides specifications for the KBM-HQ CaP System BNC Male Connector. It has a return loss greater than 30 dB up to 3 GHz, making it a high quality connector suitable for cables from 0.3 to 1.1 mm in diameter, such as RG6, RG59, and RG178. The connector has mechanical parts made from materials like brass, beryllium copper, HDPE, zinc, and rubber. It can operate in temperatures ranging from -40 to 120 degrees Celsius.
Report
Share
Report
Share
Download to read offline
Recommended
Datasheet kbm
This document provides specifications for a BNC male connector suitable for cables with inner conductors from 0.3 to 1.1 mm in diameter. The connector has an impedance of 75 ohms and operates from 0-1 GHz with a return loss better than -54 dB. It is made from brass, nickel, bronze, derlin, zinc, silicone, steel and protected plastic and can operate from -40 to +120 degrees Celsius.
Datasheet GC
This document provides product specifications for a female F-connector (GC CaP System F FEMALE CONNECTOR) for connecting coaxial cables. The connector is suitable for cables with inner diameters between 0.3-1.1mm, has a 75 ohm impedance rating up to 2GHz, and can withstand 500V and 5000M-ohm insulation resistance. It has a zinc-nickel plated body and bronze-nickel plated shrapnel. Each connector is sold with two CaPs and has an operating temperature range of -40 to 120 degrees Celsius.
Canadian 290w panel Kuk
This document summarizes the specifications of Canadian Solar's CS3K-290P/295P/300P high efficiency polycrystalline solar photovoltaic modules. The modules have a high PTC rating of up to 92.63% and provide benefits such as lower hot spot temperature, low power loss in cell connection, and minimized micro-cracks. They also have a low NMOT of 42±3°C and a low temperature coefficient of -0.37%/°C. The modules come with a 25-year linear power output warranty and a 12-year product warranty on materials and workmanship.
High precision high current power supply
2000 Amp 20 volt precision MRI magnet power supply with very stable current regulation and very low noise.
Abtech APC Photocell - Spec Sheet
The APC photocell is a device that can automatically control lighting in hazardous areas without requiring extensive rewiring. It uses proven circuitry in an enclosure that provides ingress and UV protection. The photocell can switch lights off when a certain light level is reached, helping to reduce energy costs. It is rated for use in Zone 1 hazardous areas and has IP66/67 ingress protection.
IEEE_RFIC 2007 (2)
This document describes a temperature compensated 2.45 GHz ring oscillator circuit with double frequency control. The circuit uses a double control technique that independently controls voltage and current to improve temperature compensation. Experimental results show the temperature drift is reduced from 1291 ppm/°C to 73 ppm/°C without degrading other performance metrics like phase noise, frequency range, and power consumption. The double control technique provides an effective and low-cost solution for temperature compensation in wireless communication applications.
HNT5040MT3R3 20160108
This document contains specifications for an electronic component. It includes:
1. Electrical characteristics such as current and inductance ratings.
2. Mechanical dimensions.
3. Manufacturing details like part number, manufacturer contact information, and approval specifications.
Shenzhen Hifibercom Technology Co.,Ltd Mems optical switch module
This document summarizes the specifications of MEMS optical switch modules from Shenzhen Hifibercom Technology Co., Ltd. that are available from 2x2 to 64x64 configurations. Key features include compact size, low power consumption, high repeatability and stability, independent wavelength and direction switching. Main specifications outlined include insertion loss from 1-1.7dB depending on number of channels, over 50dB return and crosstalk, less than 0.15dB PDL, operating temperature from -5 to 70°C, and over 1 billion switching cycles durability. Dimensions and ordering information are also provided.
Recommended
Datasheet kbm
This document provides specifications for a BNC male connector suitable for cables with inner conductors from 0.3 to 1.1 mm in diameter. The connector has an impedance of 75 ohms and operates from 0-1 GHz with a return loss better than -54 dB. It is made from brass, nickel, bronze, derlin, zinc, silicone, steel and protected plastic and can operate from -40 to +120 degrees Celsius.
Datasheet GC
This document provides product specifications for a female F-connector (GC CaP System F FEMALE CONNECTOR) for connecting coaxial cables. The connector is suitable for cables with inner diameters between 0.3-1.1mm, has a 75 ohm impedance rating up to 2GHz, and can withstand 500V and 5000M-ohm insulation resistance. It has a zinc-nickel plated body and bronze-nickel plated shrapnel. Each connector is sold with two CaPs and has an operating temperature range of -40 to 120 degrees Celsius.
Canadian 290w panel Kuk
This document summarizes the specifications of Canadian Solar's CS3K-290P/295P/300P high efficiency polycrystalline solar photovoltaic modules. The modules have a high PTC rating of up to 92.63% and provide benefits such as lower hot spot temperature, low power loss in cell connection, and minimized micro-cracks. They also have a low NMOT of 42±3°C and a low temperature coefficient of -0.37%/°C. The modules come with a 25-year linear power output warranty and a 12-year product warranty on materials and workmanship.
High precision high current power supply
2000 Amp 20 volt precision MRI magnet power supply with very stable current regulation and very low noise.
Abtech APC Photocell - Spec Sheet
The APC photocell is a device that can automatically control lighting in hazardous areas without requiring extensive rewiring. It uses proven circuitry in an enclosure that provides ingress and UV protection. The photocell can switch lights off when a certain light level is reached, helping to reduce energy costs. It is rated for use in Zone 1 hazardous areas and has IP66/67 ingress protection.
IEEE_RFIC 2007 (2)
This document describes a temperature compensated 2.45 GHz ring oscillator circuit with double frequency control. The circuit uses a double control technique that independently controls voltage and current to improve temperature compensation. Experimental results show the temperature drift is reduced from 1291 ppm/°C to 73 ppm/°C without degrading other performance metrics like phase noise, frequency range, and power consumption. The double control technique provides an effective and low-cost solution for temperature compensation in wireless communication applications.
HNT5040MT3R3 20160108
This document contains specifications for an electronic component. It includes:
1. Electrical characteristics such as current and inductance ratings.
2. Mechanical dimensions.
3. Manufacturing details like part number, manufacturer contact information, and approval specifications.
Shenzhen Hifibercom Technology Co.,Ltd Mems optical switch module
This document summarizes the specifications of MEMS optical switch modules from Shenzhen Hifibercom Technology Co., Ltd. that are available from 2x2 to 64x64 configurations. Key features include compact size, low power consumption, high repeatability and stability, independent wavelength and direction switching. Main specifications outlined include insertion loss from 1-1.7dB depending on number of channels, over 50dB return and crosstalk, less than 0.15dB PDL, operating temperature from -5 to 70°C, and over 1 billion switching cycles durability. Dimensions and ordering information are also provided.
Canadian solar datasheet- ku-max_cs3u-p_high efficiency_v5.6_in
Buy Canadian Solar Panels
CANADIAN SOLAR KuMax CS3U-350
Canadian Solar Panel 350 Watt
Canadian Poly PERc 350 watt solar panel
Bi xenon hid kithd-dad-hb1
This document provides information on a Bi-Xenon HID conversion kit for vehicle headlights that use 9004/HB1 halogen bulbs. The kit includes two HID bulbs, two ballasts, relay kits, plugs and wiring. It offers a brighter light output than halogen, is water and dust proof, and has a compact ballast design. The kit provides various configuration options and a one year warranty. It is suitable for automotive and other applications that require improved lighting performance.
53 k1d7 c07n1-lv_3.0
This technical data sheet provides specifications for the Rosenberger 53K1D7-C07N1 N 50 Ω straight jack connector. It lists electrical and mechanical characteristics such as an impedance of 50 ohms, a frequency range up to 11 GHz, return loss and insertion loss values, mating cycles over 500, and environmental specifications including operating temperature range, corrosion resistance, and IP68 moisture protection. Materials used include brass, bronze, TPX dielectric, and silicone gaskets.
Shenzhen Hifibercom Technology Co.,Ltd Mems compact tunable filter
Athermal design Compact structure Hermetical assembly Low insertion loss Integrated with VOA function Fast tuning speed High durability Low power consumption
Fullrange Z007360 c
SICA 12 D 1,5 CS - Z007360 - Fullrange 12 "100 Watt RMS 200 watt TỐI ĐA - 8 ohm.
Via:amthanhgiakho.vn
DO Transmitter : DO-TX-22
This document provides technical specifications for a gas sensor including:
- It measures gas concentrations from 0 to 20.9 PPM and provides an output of 4 to 20 mA.
- It has a response time of less than 10 mSec for a 10 to 90% output change and operates from 0 to 50°C.
- Additional parameters specified include power supply, cable length, linearity, materials of construction, and warranty information.
SD 170 EX Series Radios - Maxon Solutions
The Maxon SD-170EX Series is a professional two-way radio designed for wireless applications. It has adjustable power output, a DE9 male connector, BNC antenna connection, and LED status indicator. The die cast aluminum cabinet provides durability in extreme conditions. The radio is available in VHF and UHF bands with 5/1 watt power output and is used globally in applications like security, irrigation, utilities, vehicle tracking, and water treatment.
Accendo GloGreen Digital HID (DHID) Ballast B575W-347M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B575W-347M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
60 Monocrystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
5. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
Shenzhen sinovo telecom co.,limited
Shenzhen Sinovo Telecom co.,limited produces a 200GBASE-SR4 QSFP-DD active optical cable and a 2x100GBASE-SR4 QSFP-DD active optical cable that uses eight channels of full-duplex multimode fiber and VCSEL technology. The cables support data rates of 10Gb/s and 25Gb/s per channel, have a QSFP-DD form factor, low power dissipation of under 4.5W per cable, and an operating temperature range of 0-70 degrees Celsius.
Canadian solar datasheet- Poly Perc Module CS3U-360P
Canadian solar Panel KUMAX High efficiency Poly Perc Module CS3U-360P datasheet by Pakistansolartraders.com
SAR05030MT2R2-OK
The document provides specifications for an electronic component including:
1. Electrical characteristics such as inductance of 2.2uH ±20% at 100KHz/1V, saturation current of 5.5A typical and 7.5A maximum, and DC resistance of 25mΩ typical and 29mΩ maximum.
2. Mechanical dimensions, operating temperature range of -25°C to +125°C, and manufacturer contact information.
3. The part number SAR05030MT2R2 and approval specification for the component.
Datasheet CaP COL
Pressure-on Connector, for all coaxial cables up to 7 mm diameter. This product is worldwide patented. It is simple and quick, economical, reusable and recyclable, made in Italy, mechanically strong and electronically superior. It is available in 9 different colours.
Passing band: 0 – 6000 MHz
Jinko cheetah perc 400 v (1)
JinkoSolar produces high-efficiency mono PERC solar modules. Key features include 390-410W power output, a 5 busbar half cell design for improved efficiency up to 20.38%, and certifications for durability in severe weather. Warranties cover 12 years for defects, 25 years for linear power performance. Modules are PID resistant and rated for 1500V safety.
CMA05MT101 SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 50V Typ, insulation resistance of 10 MΩ Min, and withstand voltage of 125V Typ.
2. Mechanical dimensions and a marking of "N/A".
3. Performance curves and test frequency of 100 MHz/0.5V.
CMA05MT121 SPEC
This document provides specifications for an electronic component. It includes:
1) Measurements for items A through F in a table with units of mm and tolerances ranging from ±0.1 to ±0.2.
2) Electrical characteristics including insulation resistance of 10MΩ minimum, withstanding voltage of 125V typical, an operating temperature range of -25°C to 85°C, and a rated voltage of 50V typical.
3) Additional specifications for DCR at 100MHz/0.5V of 0.3Ω maximum, and a typical cut-off frequency of 1.0GHz.
Hanwha q cells_data_sheet_qpeak_duo_l-g5.2_380-395_2018-03_rev05_na (1)
The document is a product specification sheet for the Q.PEAK DUO L-G5.2 380-395 solar module from Hanwha Q CELLS. The module uses Q.ANTUM cell technology and has a power output of 380-395 watts. It provides high yields, optimal performance in various weather conditions, and long-term yield security through various technologies. The module comes with a 12-year product and 25-year linear performance warranty.
72 Cell Modules and 60 cell modules (multi-crystalline)
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
60 Multi-crystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
RP220
RP220 laminates are woven fiberglass/PTFE composite
materials. Using precise control of the fiberglass/PTFE
ratio, RP220 laminates offer a range of choices from the
lowest dielectric constant and dissipation factor to a more
highly reinforced laminate with better dimensional
stability.
Datasheet CaP
This document provides product specifications for a CaP F MALE CONNECTOR. The connector is suitable for cables with inner conductors from 0.3 to 1.1 mm, has impedances of 50-75-92 ohms, and operates at frequencies up to 3 GHz. It has screening attenuation greater than -80 dB and return loss greater than -24 dB at 3 GHz. The connector body is made from a protected plastic compound that has a tensile strength of 17 MPa and is halogen free and UV protected.
H4 bi xenon hid kit
This document describes and provides specifications for the H4 Bi-Xenon HID kit from Future Vision. The kit includes two HID bulbs, two ballasts, wiring, and a one year warranty. It produces 2.5 times more light than halogen and is waterproof and vibration resistant. The kit is compatible with H4/HB2/9003 bulbs and various wattage options are available starting at $374.99.
177230 seismic transmitter datasheet
The 177230 Seismic Transmitter is a loop-powered vibration monitoring device that provides reliable basic protection and accurate vibration data. It integrates easily into asset monitoring systems to help manage downtime and avoid failures. Key features include ease of use, quality data output, robust design for reliability, and compliance with various industry standards and hazardous area certifications.
More Related Content
What's hot
Canadian solar datasheet- ku-max_cs3u-p_high efficiency_v5.6_in
Buy Canadian Solar Panels
CANADIAN SOLAR KuMax CS3U-350
Canadian Solar Panel 350 Watt
Canadian Poly PERc 350 watt solar panel
Bi xenon hid kithd-dad-hb1
This document provides information on a Bi-Xenon HID conversion kit for vehicle headlights that use 9004/HB1 halogen bulbs. The kit includes two HID bulbs, two ballasts, relay kits, plugs and wiring. It offers a brighter light output than halogen, is water and dust proof, and has a compact ballast design. The kit provides various configuration options and a one year warranty. It is suitable for automotive and other applications that require improved lighting performance.
53 k1d7 c07n1-lv_3.0
This technical data sheet provides specifications for the Rosenberger 53K1D7-C07N1 N 50 Ω straight jack connector. It lists electrical and mechanical characteristics such as an impedance of 50 ohms, a frequency range up to 11 GHz, return loss and insertion loss values, mating cycles over 500, and environmental specifications including operating temperature range, corrosion resistance, and IP68 moisture protection. Materials used include brass, bronze, TPX dielectric, and silicone gaskets.
Shenzhen Hifibercom Technology Co.,Ltd Mems compact tunable filter
Athermal design Compact structure Hermetical assembly Low insertion loss Integrated with VOA function Fast tuning speed High durability Low power consumption
Fullrange Z007360 c
SICA 12 D 1,5 CS - Z007360 - Fullrange 12 "100 Watt RMS 200 watt TỐI ĐA - 8 ohm.
Via:amthanhgiakho.vn
DO Transmitter : DO-TX-22
This document provides technical specifications for a gas sensor including:
- It measures gas concentrations from 0 to 20.9 PPM and provides an output of 4 to 20 mA.
- It has a response time of less than 10 mSec for a 10 to 90% output change and operates from 0 to 50°C.
- Additional parameters specified include power supply, cable length, linearity, materials of construction, and warranty information.
SD 170 EX Series Radios - Maxon Solutions
The Maxon SD-170EX Series is a professional two-way radio designed for wireless applications. It has adjustable power output, a DE9 male connector, BNC antenna connection, and LED status indicator. The die cast aluminum cabinet provides durability in extreme conditions. The radio is available in VHF and UHF bands with 5/1 watt power output and is used globally in applications like security, irrigation, utilities, vehicle tracking, and water treatment.
Accendo GloGreen Digital HID (DHID) Ballast B575W-347M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B575W-347M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
60 Monocrystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
5. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
Shenzhen sinovo telecom co.,limited
Shenzhen Sinovo Telecom co.,limited produces a 200GBASE-SR4 QSFP-DD active optical cable and a 2x100GBASE-SR4 QSFP-DD active optical cable that uses eight channels of full-duplex multimode fiber and VCSEL technology. The cables support data rates of 10Gb/s and 25Gb/s per channel, have a QSFP-DD form factor, low power dissipation of under 4.5W per cable, and an operating temperature range of 0-70 degrees Celsius.
Canadian solar datasheet- Poly Perc Module CS3U-360P
Canadian solar Panel KUMAX High efficiency Poly Perc Module CS3U-360P datasheet by Pakistansolartraders.com
SAR05030MT2R2-OK
The document provides specifications for an electronic component including:
1. Electrical characteristics such as inductance of 2.2uH ±20% at 100KHz/1V, saturation current of 5.5A typical and 7.5A maximum, and DC resistance of 25mΩ typical and 29mΩ maximum.
2. Mechanical dimensions, operating temperature range of -25°C to +125°C, and manufacturer contact information.
3. The part number SAR05030MT2R2 and approval specification for the component.
Datasheet CaP COL
Pressure-on Connector, for all coaxial cables up to 7 mm diameter. This product is worldwide patented. It is simple and quick, economical, reusable and recyclable, made in Italy, mechanically strong and electronically superior. It is available in 9 different colours.
Passing band: 0 – 6000 MHz
Jinko cheetah perc 400 v (1)
JinkoSolar produces high-efficiency mono PERC solar modules. Key features include 390-410W power output, a 5 busbar half cell design for improved efficiency up to 20.38%, and certifications for durability in severe weather. Warranties cover 12 years for defects, 25 years for linear power performance. Modules are PID resistant and rated for 1500V safety.
CMA05MT101 SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 50V Typ, insulation resistance of 10 MΩ Min, and withstand voltage of 125V Typ.
2. Mechanical dimensions and a marking of "N/A".
3. Performance curves and test frequency of 100 MHz/0.5V.
CMA05MT121 SPEC
This document provides specifications for an electronic component. It includes:
1) Measurements for items A through F in a table with units of mm and tolerances ranging from ±0.1 to ±0.2.
2) Electrical characteristics including insulation resistance of 10MΩ minimum, withstanding voltage of 125V typical, an operating temperature range of -25°C to 85°C, and a rated voltage of 50V typical.
3) Additional specifications for DCR at 100MHz/0.5V of 0.3Ω maximum, and a typical cut-off frequency of 1.0GHz.
Hanwha q cells_data_sheet_qpeak_duo_l-g5.2_380-395_2018-03_rev05_na (1)
The document is a product specification sheet for the Q.PEAK DUO L-G5.2 380-395 solar module from Hanwha Q CELLS. The module uses Q.ANTUM cell technology and has a power output of 380-395 watts. It provides high yields, optimal performance in various weather conditions, and long-term yield security through various technologies. The module comes with a 12-year product and 25-year linear performance warranty.
72 Cell Modules and 60 cell modules (multi-crystalline)
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
60 Multi-crystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
RP220
RP220 laminates are woven fiberglass/PTFE composite
materials. Using precise control of the fiberglass/PTFE
ratio, RP220 laminates offer a range of choices from the
lowest dielectric constant and dissipation factor to a more
highly reinforced laminate with better dimensional
stability.
What's hot (19)
Canadian solar datasheet- ku-max_cs3u-p_high efficiency_v5.6_in
Canadian solar datasheet- ku-max_cs3u-p_high efficiency_v5.6_in
Shenzhen Hifibercom Technology Co.,Ltd Mems compact tunable filter
Shenzhen Hifibercom Technology Co.,Ltd Mems compact tunable filter
Accendo GloGreen Digital HID (DHID) Ballast B575W-347M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B575W-347M Electrical Test Report
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
Canadian solar datasheet- Poly Perc Module CS3U-360P
Canadian solar datasheet- Poly Perc Module CS3U-360P
Hanwha q cells_data_sheet_qpeak_duo_l-g5.2_380-395_2018-03_rev05_na (1)
Hanwha q cells_data_sheet_qpeak_duo_l-g5.2_380-395_2018-03_rev05_na (1)
72 Cell Modules and 60 cell modules (multi-crystalline)
72 Cell Modules and 60 cell modules (multi-crystalline)
Similar to Datasheet KBM HQ
Datasheet CaP
This document provides product specifications for a CaP F MALE CONNECTOR. The connector is suitable for cables with inner conductors from 0.3 to 1.1 mm, has impedances of 50-75-92 ohms, and operates at frequencies up to 3 GHz. It has screening attenuation greater than -80 dB and return loss greater than -24 dB at 3 GHz. The connector body is made from a protected plastic compound that has a tensile strength of 17 MPa and is halogen free and UV protected.
H4 bi xenon hid kit
This document describes and provides specifications for the H4 Bi-Xenon HID kit from Future Vision. The kit includes two HID bulbs, two ballasts, wiring, and a one year warranty. It produces 2.5 times more light than halogen and is waterproof and vibration resistant. The kit is compatible with H4/HB2/9003 bulbs and various wattage options are available starting at $374.99.
177230 seismic transmitter datasheet
The 177230 Seismic Transmitter is a loop-powered vibration monitoring device that provides reliable basic protection and accurate vibration data. It integrates easily into asset monitoring systems to help manage downtime and avoid failures. Key features include ease of use, quality data output, robust design for reliability, and compliance with various industry standards and hazardous area certifications.
WOR03-211 Datasheet
This optical receiver is designed for fiber to the home (FTTH) applications. It has a wide optical receiving range from -10 to 0 dBm. Installation is simplified as no debugging is needed. Key features include unique heat dissipation, strong anti-interference ability, compact size, and support for coaxial power supply. Specifications include an output range from 63-83 dBuV, CNR above 51 dB, and operating temperature range from 0-55 degrees Celsius.
Explosion Proof Lights in Stock
The document provides specifications for various explosion proof lights, strobes, and warning devices. It includes 22 listings with details on part numbers, manufacturers, voltages, wattages, enclosure ratings, light outputs, and other technical specifications for each product. The listings cover a range of explosion proof lights and strobes suitable for industrial and hazardous location use.
Acome cable types - Acome kaapelityypit
This document provides specifications for several coaxial cable models produced by ACOME R&D Produits. It describes the construction and materials used in the inner conductor, dielectric, outer conductor and jacket layers. It also lists the mechanical and electrical characteristics including impedance, capacitance, return loss, power handling, and attenuation over frequency for each cable model. The models include flexible and super flexible coaxial cables in 1/2" and 7/8" diameters with standard polyethylene and flame retardant low smoke zero halogen jackets.
L1 L2 GPS GLONASS Active Helix Antenna
The M1227HCT-A-SMA is a compact, high performance GPS/GLONASS antenna designed for precision applications. It features exceptional pattern control, high efficiency, and polarization purity. The antenna provides gains of 2dBic within the L1 and L2 bands, rejects out-of-band interference by more than 50dB, and is rated to withstand 50V/m of interference. It is a screw-on design with an integrated SMA connector and O-ring sealing for waterproofing.
Et7 Sidestream capnography from Meditech
Simple connection sample lines allows the ET7 to be one of the industries lowest cost per patient End-tidal CO2 systems.
Quantum devices qm35 spec
The document describes the Quantum Devices QM35 optical encoder. It has a bearingless modular design with resolutions up to 8192 lines per revolution. It features a low-profile assembled height, lock-n-twist assembly, through shaft sizes up to 0.375 inches, and hermetically sealed LED. The encoder provides high performance for OEM applications and various commutation and electrical configuration options.
Link Engineering Catalogue 2009
This 3 sentence summary provides the high level information from the engineering division products catalogue document:
The document presents Link Microtek's product catalogue covering a wide range of microwave components including adapters, attenuators, couplers, filters, horn antennas, OMTs, rotary joints and custom sub-systems. Each section provides descriptions of standard products along with their key specifications such as frequency range, power handling, connectors and flanges. Custom and special components can also be engineered based on specific customer requirements.
Optilab lr40eh
The PD-40 is a 40 GHz bandwidth InGaAs PIN photodetector optimized for wavelengths between 1250-1650 nm. It features high linearity up to 40 mW of input power and a flat frequency response within ±1 dB up to 40 GHz, making it suitable for applications requiring wide bandwidth such as analog RF transmission and digital signals up to 40 Gbps. The photodetector comes in a standard 2-pin package with K connector and can be ordered with or without an external protective housing.
Aot155 a data sheet
The AOT-03-1550 is a 1550nm direct modulation DWDM optical transmitter that uses a high performance DFB laser and optional DWDM wavelengths. It features low chirp to maximize signal quality over long fiber lengths and linearity to minimize degradation of QAM channels. It supports ITU wavelength standards to reduce fiber and equipment needs in cable networks. Key specifications include an operating bandwidth of 45-870/1000MHz, RF return loss of 16dB or more, and a CNR of 51dB or higher at 0dBm optical input over 10km fiber carrying 60 PAL-D channels.
Unarmored-fiber-patch-cable | Unisol
Unarmoured Optic Fiber Cables are protected by Glass-yarn in the loose tube except the Steel tape protection.
Micro e systems_-25b_f_s_l_datasheet
The Model 25B-F/S/L is an incremental optical rotary encoder designed for rugged applications. It has features such as a 100,000 hour MTBF LED light source, 200kHz frequency response, and 50G shock resistance. It is available in flange or servo mount configurations and can provide high resolution position feedback for machine tools, robots, and other industrial equipment.
cgm.3 system
The cgm.3 system consists of a range of compact (RMU) and modular cubicles with SF6 insulation, for Medium Voltage networks up to 40.5 kV. This system has evolved from the CGM-CGC system, and follows the same philosophy developed by Ormazabal 20 years ago.
More informatio at: www.ormazabal.com
Rsf electronik incremental_rotary_encoder_dg121_specsheet
The document provides technical specifications for an incremental rotary encoder. It lists the encoder's dimensions, mechanical properties including shaft dimensions and load limits, operating temperature range, sealing rating, and EMC compliance. It also details the electrical specifications such as power supply options, power consumption, reference mark output, signal output options, sampling rate, and output current.
Rsf electronik incremental_rotary_encoder_dg121_specsheet
The document provides technical specifications for an incremental rotary encoder. It lists the encoder's dimensions, mechanical properties including shaft dimensions and load ratings, operating temperature range, sealing rating, and EMC compliance. It also details the electrical specifications such as power supply options, power consumption, reference mark output, signal output options, sampling rate, and output current.
Datwyler cat6 pvc_awg24_240136_cu 662 4_Cable_Info Tech Middle East
This document provides information on a Category 6 data cable including:
1. The cable has a bare copper inner conductor, PE insulated conductor, and pair separator with an orange or grey outer sheath.
2. It is designed for robust and reliable performance for data transmission up to Category 6/Class E standards.
3. Electrical characteristics including attenuation and crosstalk are provided showing compliance with standards.
Vibrating Rod Point Level Switch for Solids
We are an ISO 9001:2015 certified manufacturer & exporter of level sensing, measurement, indication and control instruments.
Trumen came into existence in 2009 and initially started with manufacturing of Tuning Fork Level Switches for liquid and solid applications. With time, the manufacturing range increased with addition of Capacitance Level Transmitter & Capacitance Level Switches, RF Admittance Level Switches, Rotating Paddle Level Switches, Conductivity Type Level Switches, Vibrating Rod Level Switches, Hydrostatic Level Transmitter, Radar Level Transmitter & Ultrasonic Level Transmitter.
Trumen is a technocrat driven organization aimed at providing top-of-the-range and high quality level measurement and process control instruments. Formed by the pioneers who devoted their respective lives in development, design and delivery of solution to the problems faced in the field of level sensing and process measurements. Trumen has a fixed point agenda about "sensing matters", and each device created at Trumen is thoroughly tested to pass the quality norms set in-house, in order to give the best performance in all operating conditions.
ARSS Cable 12 24 48 96 core optical fiber.pdf
ARSS cable is Anti-Rodent self supporting optical fiber cable for aerial installation.
ARSS cable is with aramid yarn of high tensile and FRP strength member rod inside. And this optica cable is with corrugated steel tape armour to be anti-rodent. Outer sheath is made from HDPE for UV protection. Fiber optic cables can be installed externally on poles.
ARSS fiber cable supports
application such as 40/100Gbps Ethernet, IEEE802.3ae,10G Ethernet, IEEE802.3z, Gigabit Ethernet, Fast Ethernet,
Ethernet,100BASE-F, 52/155/622Mbps and 1.2Gbps ATM, FDDI, Fiber channel and others.
Applications
• Adopted to outdoor areial self-supporting installation
• Long-distance communication, trunk network, CATV & computer networks system, Telecom or outside plant campus backbone applications
• Ethernet LAN Network, CCTV, Network Camera, PLC
• Mechanically, rugged, cable design for : Aerial, duct
• Anti-rodent cable
ITU-T G.652D (Single Mode) optical fiber
MECHANICAL PERFORMANCE TEST
• Tensile loading Test TIA/EIA-455-33A and IEC 60794-1-2-E1A
• Compression Test TIA/EIA-455-41A and IEC 60794-1-2-E3
• Repeated Bending Test TIA/EIA-455-104A and IEC 60794-1-2-E6
• Impact Test TIA/EIA-455-25B and IEC 60794-1-2-E4
• Cable Bending Test IEC 60794-1-2-E11B
• Cable Twist or Torsion Test TIA/EIA-455-85A and IEC 60794-1-2-E7
• Temperature Cycling Test TIA/EIA-455-3A and IEC 60794-1-2-F1
• Water Penetration Test TIA/EIA-455-82B and IEC 60794-1-2-F5
TEMPERATURE RANGE
For the cables covered by this specification, the following temperature ranges apply.
- Operation Temperature : -40℃ to +70℃
- Installation Temperature : -40℃ to +70℃
- Storage/Shipping Temperature : -40℃ to +75℃
Similar to Datasheet KBM HQ (20)
Rsf electronik incremental_rotary_encoder_dg121_specsheet
Rsf electronik incremental_rotary_encoder_dg121_specsheet
Rsf electronik incremental_rotary_encoder_dg121_specsheet
Rsf electronik incremental_rotary_encoder_dg121_specsheet
Datwyler cat6 pvc_awg24_240136_cu 662 4_Cable_Info Tech Middle East
Datwyler cat6 pvc_awg24_240136_cu 662 4_Cable_Info Tech Middle East
Recently uploaded
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Recently uploaded (20)
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Datasheet KBM HQ
- 1. PRODUCT DATASHEET KBM-HQ CaP System BNC MALE CONNECTOR HIGH QUALITY: R. L. > 30 dB Stripping Dimension: Utilize these Tools Suitable for Cables: RG6, RG59, RG178, ... suitable for all cable with inner conductor from Ø 0,3 up to Ø 1,1 mm (from AWG 28 to AWG 18) Electrical Specification Impedance: Frequency: Return Loss: Dielectric W/V: Insulation res: Return Loss: 75 Ohm 0-3 GHz > 30 db @ 3 GHz 500 Veff 5000 M-Ohm dB Mechanical Specification 10 0 -10 -20 -30 -40 -50 Mkr (MHz) 1: 100 2: 1000 3: 2000 4: 3000 -60 -70 Start 0.300 MHz dB -54.083 -42.618 -38.761 -31.056 Body Material: Center Contact: Insulator: Bayonet Cap: Gasket: Washer: Spring: Inner Retaining Ring: CaP®: Weight: Brass - Gold plated Beryllium Copper - Gold plat. HDPE Zinc - Black Nickel plated Rubber Fe - Nickel plated SK5 - Nickel plated Fe - Nickel plated Protected Plastic Compound 9.8 g Environmental Specification Operating Temp: - 40 ÷ + 120 °C Stop 3000.000 MHz All measures are in millimeters TELECOM & SECURITY: Viale Stefano Tinozzi, snc - Zona Ind.le Interporto d’Abruzzo - 65024 Manoppello (PE) - ITALY Tel. +39.085.8569020 - Fax +.39.085.8569707 - www.telecomsecurity.it - info@telecomsecurity.it - Skype: telecomsecurity_info Technical data and characteristics are not binding an may be changed without prior notice